14 best kff drill press

Product description

Floor Drill Presses, Floor Drill Press, Drive Type Belt, Swing 15 In., Spindle Taper 2MT, Motor HP 3/4, Capacity Steel 1/2 In., Capacity Cast Iron 5/8 In., Drilling Capacity Wood Not Specified, Includes Chuck with Key, Power Down Feed Included No, Voltage 120/240, Amps AC 9.0/4.5, Number of Speeds 16, Chuck Size 5/8 In., Spindle Speed 200 to 3630 rpm, Spindle Travel 3-1/8 In., Base Size 11 In. x 19-1/2 In., Table Work Surface 9-1/2 In. x 9-1/2 In., Hz 60, Phase 1

From the Manufacturer

The J-2500 15" Floor Drill Press boasts a 3/4HP motor and tilting table. Simple yet powerful, the J-2500 has a cast iron head and large quill - allowing greater accuracy.

• Work table tilts 45°.
• GREATER PRECISION AND ACCURACY: Enclosed spidle assembly is supported by four permanently-lubricated ball bearings.
• TELESCOPING SPINDLE GUARD: Extend the guard as much as needed.
• 3-1/8" stroke for deep hole applications.
• 5/8" drill chuck and arbor

User questions & answers

Question:	What country is this drill press manufactured
Answer:	Great question. It’s designed in the United States. But manufactured in China. But it is of good heavy quality.
Question:	does white glove delivery indicate setting up the machine
Answer:	167 lbs you assemble it on the floor then you have one person hold down the base well you stand it up. sounds to me that 167 lbs is to much for you to lift and if soo you should probly buy a smaller one that you can lift on your own. there always a chance of knocking it over and if your too wimpy to pick it up then you could get stuck under it if it fell on you.
Question:	does this drill press have a laser
Answer:	No it does not have a laser.
Question:	does this drill have a mechanical speed adjustment
Answer:	Yes Andrew, this press has a 3 pulley head arrangement that permits 16 speed possibilities from 200 to 3360 rpm at the spindle/ chuck. This is my favorite drill press in 44 years of professional building and mill experience. Highly recommend!

Product description

The PM2800B brings simplicity to your shop. An ease of use that is truly unique. A level of mechanical elegance that you'll only find in a Powermatic. As with every product Powermatic builds, the PM2800B pushes the limits of design, innovation, and durability.

• SPEED RANGE: 250 to 3,000 RPM
• SPINDLE TRAVEL: 6"
• COLUMN DIAMETER: 3"
• SWING: 18"
• QUILL DIAMETER: 2.6"
• TABLE SIZE (L x W): 20-1/4" x 14"

User questions & answers

Question:	I am considering a new drill press for my workshop also looking at jet and grizzly but this price point is double for powermatic. is it worth it
Answer:	I haven't looked at grizzly or jet but I have not been happy with my powermatic. I personally would have chosen the Rockwell one that is at the same price point as the powermatic. Had I known about all the problems I have had to deal with and still dealing with.
Question:	What is the diameter of the column
Answer:	three inches
Question:	For those that bought this drill press are you happy? read many reviews online of things gone wrong with this drill press. However it's got 4.5 stars
Answer:	I have not had any problems since I purchased this drill press (about 12 months). Read all the reviews I could on this drill press as well as many others and decided to go with the Powermatic. Wanted the Delta but since you can not get parts, their customer service sucks and too many customer service horror stories I went with Powermatic.
Question:	Can the direction of this drill be easily reversed to back a tap out and forth while power tapping a hole
Answer:	ALL normally non-reversing drill presses with 3/4hp, 1hp and 1-1/2hp (like this Drill Press), are capacitor start, "induction motors", and CAN INDEED BE REVERSED by installing a DPDT switch that will reverse two windings of the induction motor. These two windings are labeled T5 and T6, and are located under the cover plate at the end, or under the capacitor cover on the side. On some larger motors (1hp and 1-1/2hp), T8 is sometimes used in place of T6. Drill Presses with smaller motors, like 1/4hp, 1/3hp, and 1/2hp, are usually not capacitor start, but can be reversed by switching the same two leads, T5 and T6 (T8 is NOT used on the smaller motors). Once installed and tested for function, simply mount the DPDT switch anywhere it is within convenient reach, which can be on the drill press head (with wire lead extensions), or on the motor casing itself. Here is a complete explanation: http://www.ehow.com/how_6005849_reverse-single-phase-ac-motor.html

Product description

Accuracy, stability, and versatility are the benchmark features of the JET 20" drill presses. This high quality line of JET drill presses offer a greater range in spindle speeds than other machines of this class. JET backs their machines with the industry-leading Two-Year Warranty.

A great choice for professionals as well as for home woodworkers, the Jet 354170 JDP-20MF 20-inch floor drill press spins bits up to 3/4 of an inch with 12 speeds from 150 to 4,200 rpm. It's equipped with a built-in work lamp, adjustable tension spindle return spring, and hinged metal belt and pully cover. A drill chuck and key are included, and it's backed by a two-year limited warranty.

The JDP-20MF 20-inch floor drill press (view larger).

Features

The Jet 354170's smooth-traveling table raises and lowers at the turn of a crank to exactly where you need it. And angled drilling is easy thanks to the rotating, 45-degree tilting worktable that also features a quick-release clamp. The 1-1/2-horsepower motor can run off either 115-volt outlets (for which it comes prewired) or 230-volt sources, and it provides 12 drill speeds ranging from 150 to 4,200 rpm. To change the speed, just flip open the hinged metal cover, disengage the motor, slip the belt onto the right pulley, and you're back at work in a flash.

The 354170 has a 1/2-inch diameter external positive depth stop with three-nut locking feature for quick adjustment. It also offers an adjustable tension spindle return spring, with the spindle supported by high-quality ball bearings. Other features include an on/off switch located on front of the drill press head and a built-in work lamp (bulb not included).

What's in the Box

One Jet 354170 JDP-20MF drill press (head assembly, table, column and table bracket assembly, base), chuck and key, arbor, drift key, and operating and assembly instructions.

From the Manufacturer

The JET JDP-20MF floor model drill press is a must for medium to big drilling jobs. A powerful 1-1/2-horsepower, 115-volt motor delivers the power to the 3/4-inch drill chuck mounted up in the MT-3 spindle. Large production table, 19-by-16-inch, will hold those big pieces securely. 12 spindle speed range from 150 - 4,200 rpm and are changed by moving the belts at the top of the press.

FEATURES

• Hinged metal belt and pulley cover coupled with quick adjustment motor mount allows rapid changing of spindle speeds
• Rotating, +45 degrees tilting, crank-operated worktable with quick-release clamp
• On/Off switch located on front of the drill press head for safety
• A 1/2" diameter external positive depth-stop with dual nut locking feature for quick adjustment
• Adjustable tension spindle return spring
• Spindle is supported by high quality ball bearings
• Built-in work light; bulb not included
• Drill chuck and key included

SPECIFICATIONS

Swing (in): 20-1/2

Drilling Capacity (in): 1

Chuck Size (in): 3/4

Spindle Travel (in): 4-5/8

Spindle Distance to Base (in): 46-3/4

Spindle Distance to Table (max/in): 29-1/8

Table Size (dia/in): 18-5/8 x 16-1/8

Spindle Taper: MT-3

Column Diameter (in): 3-3/8

Number of Spindle Speeds: 12

Range of Spindle Speeds (RPM): 150 - 4,200

Base Size (in): 13-5/8 x 22-3/8

Motor: 1-1/2 HP, 1 Ph 115/230V Prewired 115V

Net Weight (lbs): 288.

• VARIABLE-SPEED: 1-1/2 HP motor has 12 speeds from 150 to 4,200 RPM.
• REPETITION: 1/2"-diameter external depth stop, with three-nut locking feature, allows for fast adjustments.
• ACCURACY: Depth stop has a quick-set bolt for fast, accurate adjustments.
• VISIBILITY: Built-in worklight (bulb not included) provides additional visibility.
• VERSATILITY: Quick-release crank-operated worktable can tilt +/- 45°.

User questions & answers

Question:	Can the direction be reversed? I want it for power tapping holes. Need to reverse direction quickly
Answer:	What you want is a self-reversing tapping attachment. Here's a video of one. https://www.youtube.com/watch?v=r1rZ_M1Qnys
Question:	Hey, would someone give me a vague measurement for the drill head alone? I'm trying to figure out if it will fit in my car. . Long story
Answer:	30" long, 10" wide and deep, about 130# Put an 800# lathe in a Volkswagen after dismantling into 3 peices by myself. 1978
Question:	What country was it made
Answer:	This Jet Floor Drill Press is made in China.
Question:	what's the difference between a jet j-2550 drill press and a jet 354170/jdp-20mf drill press
Answer:	Jdp-20mf has 1 1/2Hp motor with 110 and 220 volt depending on setup. Also has 3/4" drill Chuck instead of j2550 5/8". I can still put drill bits smaller than 1/8"in Chuck. You can call jet and ask questions. Also,I did change jet drill depth spindle stop with quick settle nut which I like.

• The Fulton Deluxe Drill Press Table with Adjustable Aluminum Fence is the perfect addition for most any drill press. If you have a large floor drill press or a smaller bench top, odds are this add-on table top will quickly and easily mount to it. This feature rich drill press table allows you to drill accurate, repetitive holes, sand projects using the zero clearance plate, drill straight holes with an adjustable fence all the while it reduces vibration since it is a full 1 3/8” thick.
• This Table features a uniquely designed uni-body, L-style aluminum fence that is completely adjustable to achieve squareness to your table top and drill bit. This not only makes drilling straight holes easier, it makes drilling taller, longer stock much more accurate. To adjust the fence, you simply rotate the pre-installed set screws inside the fence or the ones on the back side of the fence until you are square. We recommend using a machinist square to do this (square not included).
• The package also includes a flip stop for repetitive drilling. The flip stop can be completely removed from the fence or it can be positioned up and out of the way when not in use. The stop works in conjunction with the center finder tape on the fence. The reason for the center finder tape is so you can accurately measure distance starting from the drill bit and work your way out from center. This method of measuring on the drill press comes in very handy on many drill press applications.
• Two zero clearance insert plates are included with the table. The inserts are removable and replaceable. They are designed to accept multiple holes so that you can drill clean holes with little or no tear-out with different size drill bits. The inserts can also be used for drum sanding purposes. Simply drill a hole slightly larger than your drum sander diameter. You can then drop your drum sander below the surface of the table to edge sand your projects with ease!
• The table is a full 1 3/8” thick and is laminated on the top and bottom to keep moisture out. The extra thick table top serves a few important purposes. First, is that it helps absorb much of the vibration which provides you with a stable working surface. Second, it allows for a unique track mounting system that lets you move the table into most any position needed. Many after market tables don’t allow for this kind of adjustability.

Product features

Fulton Deluxe 1 3/8 inch Thick Drill Press Table with Precision Tilt Capable Adjustable Fence System

The most complete after market drill press table available. With all the accessories and features not available on other table tops, the Fulton Deluxe Drill Press Table is sure to expand your drill press machine capabilities the moment you mount it!

Whats in the box?

• 15" x 24" x 1-3/8" thick laminated drill press table
• Precision, tilt capable aluminum fence system with center finding scale
• Aluminum flip stop for repetitive and accurate hole drilling
• 2 each PVC tipped Aluminum Hold Downs for keeping your stock in place
• 2 each Zero Clearance Inserts to help reduce tear-out and to allow zero clearance for multiple size sanding drums
• 2 each Post Knobs and Mounting Hardware for mounting the table to drill press machines with slotted factory tables

High Quality Parts for High Quality Projects and High Quality Results

No matter the size and scope of your projects the Fulton Deluxe Drill Press Table will be the perfect complement to your drill press to help drill precisely located, straight, true holes time after time after time. Wether using a standard drill bit, brad point bit or even large multi-tooth forstner bits, this table is the perfect table to help support your project and help get the job done.

Precision Aluminum Fence System

When we were designing this fence, we had a number of customers call in about other manufacturers drill press fences. One of the most pointed out flaws that there was no way to square the fence to the drill bit. The only way to do this with other fences was to shim the front or back until you got kind of sort of close. Now, with the Fulton Precision Aluminum Fence, you can actually tilt the fence back or front using set screws at both ends of the fence! This makes squaring up your fence way easier than ever before! The fence includes a center finding measuring tape to make locating center on your stock easy. The aluminum fence stop is the perfect way to drill holes at the same spot on multiple pieces of stock. When not in use the flip stop can be flipped up and out of the way or it can be completely removed by sliding it off the fence.

That's a THICK table top!

Why such a thick table top you ask? Well in this case, we believe that thicker is definitely better than thinner table tops. Our thicker table helps absorb the natural vibrations caused by drill presses and helps make the drilling process feel much smoother. Thinner tables tend to feel kind of well, thin in comparison after using the Fulton Table Top. Its a full 1-3/8" thick of laminated MDF that is sealed on the top and bottom to help prevent moisture and bowing of the table.

Slotted Factory Table? No Slots on your Factory Table? No Problem!

Unlike many other drill press tables, the Fulton Deluxe Drill Press Table can be mounted to virtually any drill press! With your unique track base mounting system, you can use standard post knobs to mount the table to slotted factory table tops or use aluminum hold downs to clamp the table to non-slotted factory table tops.

Prevent Tear-out and Edge Sand Projects with Ease!

The Fulton Deluxe Drill Press Table comes with two Zero Clearance Insert Plates. The reason we include a second plate is simply because many woodworkers like to drill multiple size holes into the plates for multiple size bits. Another reason is for one plate to be used for drilling while the other can be used for sanding. Simply drill holes that are slightly larger than your sanding drum diameter. This allows you to drop a sanding drum down below the surface of the drill press table to make edge sanding easy. The plates can be rotated after they are drilled for a fresh area for a new hole.

Mounts to Most Any Size Drill Press

The Fulton Deluxe 1 3/8 inch Thick Drill Press Table with Precision Tilt Capable Adjustable Fence System can be mounted to most any drill press from 10" or larger. The table will work on 10" drill presses. When mounted to a 10 inch drill press, the center of the opening on the Fulton Deluxe Drill Press Table will not line up on center with the drill press chuck as it does on larger drill press machines. This means that the largest diameter drill bit you can use without drilling into the Fulton Deluxe Drill Press Table is 1-5/8" in diameter on 10" drill press machines. Larger drill press machines will accept larger diameter drill bits.

Product description

The DEWALT DWE1622K 2" 2-Speed Magnetic Drill Press features a 10 amp motor with 2-speed settings that provide optimal performance in a variety of applications. This press has overload protection electronics which prevent motor damage and excess accessory wear designed for long life. A Quick Change chuck system allows for tool free change between 3/4" Weldon Shank and 1/2" keyed chuck, and the Quick Release feed handles provide tool free change of handles to either side of the tool. The magnetic self feed cooling tank allows the user to regulate the flow of cooling fluid and can be placed on either side of tool or on a work surface to allow for a variety of tool orientations. 4" Drill travel offers maximum capacity for heavy duty applications, along with a motor height adjustment that gives greater range of accessory compatibility. Includes: DWE1622 Drill Press, Safety chain, and Height adjustment tool, Quick change 1/2-in keyed chuck, Kit box

• 10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpm
• Overload protection electronics which prevent motor damage
• Quick Change chuck system. Drillpoint Pressure @ 1/2" Steel Plate (12mm) : 741 pounds
• Magnetic coolant bottle can be placed on either side of tool or on a work surface
• 4-3/8 inch Drill travel offers maximum capacity for heavy duty applications

User questions & answers

Question:	What's the biggest hole I caught make with this drill
Answer:	I have this tablet mount. I use it daily, in my Chevy Silverado. I use it for my iPad Pro12”. It works great. Maps at a glance. Hands free....
Question:	what is the max cutting diameter
Answer:	Hi Joe, Thank you for Contacting us. No, it does not have a 17mm ball mount. It has a 25mm ball to 2t adapter.
Question:	Does it have a reverse speed? If not, do you have a different Drill with reverse speed
Answer:	No, it does not
Question:	How loud is it? Say I was drilling into a safe and didn't want anyone to hear me, Hypothetically
Answer:	No, it does not

• 【Strong Power】Magnetic Drilling System Motor: 1200 W, 110 V, 50 Hz
• 【High-Performance】This Magnetic Drill Press has Max drilling diameter 23mm(0.9'), drilling range:φ1.5-23mm(0.06-0.9'), 500 RPM; Max Magnetic Force: 13000N(2920LBS), travel guide: 210mm(8.3')
• 【High Compatibility】This Magnetic Drill Press Machine is suitable for 1.5-23mm(0.06-0.9') broaching tools and fittings (not included)
• 【Easy to Use】Our Electric Magnetic Drill Press is Easy to operate, the electro-magnetic base is controlled by a flick of a switch to engage or disengage the magnet and drill
• 【Wide Application】Versatile, accurate and fast, with strong magnetic adhesion (2920LBS), the MB23 is an essential tool when performing heavy-duty industrial and steel fabrication work; and this MB23 Magnetic Drilling System is suitable for steel structure, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power generation, drilling rig, electric power construction, railway manufacturing and other fields

User questions & answers

Question:	is the users manual in english
Answer:	The drill bit used would make a big difference! I would not ,"Push it past 1/8 " of cold rolled steel, due to, SAFETY considerations. Hoped this helped......
Question:	What is the weight of the machine
Answer:	The center column is made out of the "thin" tube, like electrical conduit. I replaced mine with solid bar 6` but cost was $100 ish...
Question:	how would this work for drilling hole in 4" sch 40 black iron pipe for saddles
Answer:	Nope. Because I got rid of mine because the belt would slip when drilling through a 1.5 inch oak
Question:	Is it possible to change over to use a standard drill chuck on occasion
Answer:	The bottom base that sits on the counter is 7 x 12.The drill platform is 7 x 6 1/2.I added a sheet of red oak and made a new drill platform as I felt that the 7 x 6 1/2 was too small. My new addition makes it 12 x 12 which work much better. Tom

Product features

Electromagnet Base

Strong electromagnet base for side suction and back suction. Stable at work, to ensure both your efficiency and safety.

Double Dovetail Guide Rail

Aluminum alloy guide rail, which can not only add the rigidity to the machine, but also adjust the height of the motor according to the demand.

Rocker Lever

Rocker-type lifting rod with anti-slip rubber sleeve on the surface saves time and effort and it is easy to operate.

Comfortable Grip

Ergonomic auxiliary handle for easy handling and easy carrying.

Efficient Cooling System

It has cyclone style air intake cooling system, grid air inlet that ensure efficient cooling for you.

Wide Application

Suitable for steel structure, shipbuilding, bridge engineering, wind power generation, drilling rig, electric power construction, railway manufacturing and other fields.

MB-23 Magnetic Drill Press

This class leading drill has been designed and engineered specifically for speed and total precision. With strong magnetic adhesion 13500N, optimized rotation speed (350RPM), it is an essential tool when performing heavy-duty industrial and steel fabrication work.

Product description

The ever popular W1667 and W1668 oscillating drill presses now have a big brother. Meet the W1848 floor model oscillating drill Press. Just like the Benchtop versions, this drill Press features our patented oscillating Spindle for efficient contour sanding. Convert from drilling operations to sanding operations in a matter of seconds with just a few tool-free steps.

• Motor: 3/4 HP, 110V
• Swing: 13-3/4"
• Drill chuck: 1/64"-5/8"
• Arbor: JT-33
• Range of speeds: 250-3050 RPM

User questions & answers

Question:	Where can I get a manual for this drill press
Answer:	As answered you can get a copy of the manual from Grizzly or from Amazon.http://cdn0.grizzly.com/manuals/w1668_m.pdfandhttp://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000041994.pdfThey are not identical (40 pages on the Grizzly website, and 27 on the Amazon page).On difference is the depth stop. On the Grizzly site it is a jam nut on the depth stop rodon the left side, on the Amazon it is set on a collar lock knob on the spindle on the right side.My drill press has both depth stops, but the spindle does not have the depth label, and is notmentioned in the manual that came with the drill. When using the oscillating sander feature itcould be damaged if either stop is set.
Question:	Trying to find a replacement belt for the oscillating sander portion (X1668061), anyone know where to find these online
Answer:	I'd been wondering this myself... The Stock part on my W1668 is not a belt, but rather a polyurethane o-ring. The closest analogue I could find was here: http://www.amazon.com/dp/B0051Y2LSO/ref=biss_dp_t_asn If you want true OEM parts, you can call Woodstock international at (360) 734-3482 7AM-5PM PST/PDT M-F
Question:	Is this a jt33 Taper Chuck, anyon eknow, i want to geta keyless for it
Answer:	Yes. Page 14 of the manual supplied with the drill press says, "The drill chuck is seated to the spindle with a JT-33 tapered surface and a screw."
Question:	Can I get this model drill press without damage
Answer:	Also..it's a GREAT drill press!

Product features

Shop Fox Oscillating Drill Press

The ever popular W1667 and W1668 Oscillating Drill Presses now have a BIG brother. Meet the W1848 Floor Model Oscillating Drill Press. Just like the benchtop versions, this drill press features our unique oscillating spindle for efficient contour sanding. Convert from drilling operations to sanding operations in a matter of seconds with just a few tool-free steps.

Oscillating Feature for Sanding Operation

One of the great features of the Model W1848 13-1/4-inch Oscillating Drill Press is its sanding capability. The drill press can be converted from drilling operations to sanding operations in a matter of seconds with just a few tool-free steps. Oscillation reduces heat build up and leaves a smooth finish when sanding.

Floor Model Design

This floor model drill press adds capacity and weight for a rock-solid durable build.

Tilting Table for Versatility of Applications

The W1848 offers the ability to tilt the table 90-degrees to both the left and right. You can adjust the table height and tilt to accommodate for workpiece height or achieve special drilling or sanding angles. You can also move the table out of the way and use the drill press base as a table for drilling or sanding.

Included

This drill press includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-inch, 1-1/2-inch and 2-inch drums.

Product description

Remember when power tools were actually powerful? WEN's 10-inch swing variable speed drill press with laser centering device is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This drill press has the power to drill through metal, wood and other materials. The variable speed feature allows you to target in the exact speed (infinitely from 530-3100) that works for your project. Simply move a lever and adjust the speed as needed. No pulleys and belts to change. Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout displays the running speed. Constructed with a rigid frame consisting of cast iron. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 1/2 in. chuck with JT33 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has pre-drilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. Remember when you could drill with laser precision? Remember WEN.

• Spindle travel of 2-2/5 in. with easy to read, adjustable depth stop for accurate and repeatable drilling operations
• 8 in. x 7-2/3 in. cast iron worktable features rack and pinion height adjustment and bevels up to 45 degrees left and right
• Laser target your drilling operation marked with an X-pattern display
• Includes drill press, mechanical variable speed, 1/2 in. keyed chuck and key, laser, and tools for assembly

User questions & answers

Question:	The image shows the table with a | • | configuration where some users have posted pictures of an X style configuration. Which should I expect
Answer:	Si
Question:	If I wanted to drill into a piece of vertical stock how long could the piece be and still fit between the end of the drill bit and the base plate
Answer:	Kenra Platinum Color Charge Shampoo is a color extending shampoo that extends color up to 50 shampoos; no parabens, no sulfates, no sodium chloride
Question:	whats the difference between the two 10inch wen presses: 4212 and
Answer:	I'm not sure about red, but I have used Kenra for years and find it to be an excellent, reliable product. I strayed away from it a few times only to be sorry! It does not say "not for red, chemically treated hair, so my guess is it is okay. If not sure, give Kenra company a call. Hope this helps.
Question:	When it advertizes 10 inch what is that referring to
Answer:	No. It has a very light fragrance that doesn't hang around all day, competing with whatever else you're wearing. I highly recommend Kenra products; they've made a huge difference in my fine hair. My hairdresser recommended this shampoo because it is PH-balanced and is the most gentle (it's made for color-treated hair, although mine wasn't color-treated them). I think you'll be happy with it.

Product features

No More Manual Belt Changes

The WEN 10-inch Variable Speed Drill Press easily powers through metal, wood, plastics and more. Drill up to a 1/2-inch hole into heavy duty cast iron with ease. The mechanical variable speed allows you to target in the exact RPM (from 530 to 3100) with the simple turn of a lever while the digital LED readout displays the current speed. The WEN 10-inch Variable Speed Drill Press is constructed with a rigid frame consisting of a cast iron head, table, and base. Its powerful induction motor features ball bearings for an extended life and smooth performance. The worktable bevels 45° left and right for perfectly precise and consistent angles. Slotted table allows for mounting clamps and vises while the X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. Remember when power tools were actually powerful? Remember WEN.

Depth Adjustment Gauge

Set the depth adjustment lever to limit your spindle travel for accurate and repeatable drilling operations.

Mechanical Speed Adjustment

Adjust the speed as needed with a simple move of the lever and receive the same power and torque through the entire speed range.

Beveling Worktable

Bevel the worktable 45° left and right for precise and consistently angled holes.

Digital Speed Readout

The LED screen displays the current speed of the drill press so you know the exact RPM at every moment.

Product description

If you want to set up a drilling station in a tiny room, or add a small, dedicated drill press to a crowded shop, this is the machine for you. Compact and light weight with an 8" swing and 5 spindle speeds this drill press will help you get the job done, whether you're a weekend hobbyist working out of your apartment or a full-fledged craftsperson running a production shop. Made in an ISO 9001 factory

User questions & answers

Question:	What is the Quill travel
Answer:	You mean how far down I can go? If so, 2"
Question:	Can I use a masonry bit to drill holes into bricks using this Drill Press
Answer:	Minimum rpm on the G0925 is 740 rpms. Boring up to 1/2” diameter in soft brick max rpm is 700. Masonry bits 1/2” and smaller cut more efficiently at approximately 500 to 700 rpm. Lower speeds equate to cleaner holes and extended bit life.
Question:	Country of origin
Answer:	This machine is manufactured in China.
Question:	what is the overall height ? looking for one to put on a flip table
Answer:	Fully assembled, I measured 23.5 Height * 15 depth * 9 width

Product description

Bora Portamate Mobile Base PM-3550 with swivel casters is the industrial strength solution for moving your heaviest equipment with ease.

Of all the mobile bases offered by Bora Portamonte for moving woodworking and machine shop tools, the PM-3500 leads the pack with its 1500lb capacity. And with four-swivel wheels, it's the perfect mobile base for long equipment and bulkier footprint items like molders, table saws, and planers. Your heavy machinery, benches, and other large items around your workshop easily become movable.

It’s super strong frame is perfect for industrial use. It is a universal, fully adjustable roller platform, with a capacity that exceeds the competition by hundreds of pounds.

Like our other mobile bases, this model increases and decreases its size in one-inch increments, from 20.75 x 23.75 inches to 28 x 33.5 inches. The all steel construction, solid corner brackets, and swiveling wheels with foot control locking levers ensure maximum strength, stability, and mobility. This mobile base also features side rails and corner pieces to insure the perfect secure fit for your machine.

Purchase the Bora Portamate PM-3245T Mobile Base Extension to expand your PM-3550 Mobile Base as needed. (sold separately).

The PM-3550 is ideal for larger machines like band saws, and it’s also the perfect dolly for cabinets, that fridge or washing machine you need to move, and anything else. Everything you need is included in this one convenient kit and you are backed by our one-year warranty.

Add it to your shopping cart now!

• HEAVIEST CAPACITY: The Bora Portamate Mobile Base PM-3550 has the heaviest weight capacity at 1500lbs. (680 kg). It’s industrial strength makes it ideal to move square or rectangle equipment and heavy tools around your shop.
• 4 SWIVEL WHEELS: Four swivel casters provide superior handling for maneuvering large equipment, including woodworking equipment, power tools, table saws, bandsaws, planers, jointers, shapers, sanders and more, in tight spaces.
• ADJUSTABLE SIZE: Adjusts from 20.75 x 23.75 inches to 28 x 33.5 inches (53 x 60 cm to 71 x 85 cm), and is adjustable in 1-inch (2.54 cm) increments to fit a wide variety of machines. The stand has a low profile that lifts machine height by less than 1 inch (2.54 cm).
• EASY GLIDE + LOCKING LEVERS: The easy to use foot-operated locking levers lock the steel mobile base firmly into place. When it’s time to get moving, the 3 inch non-marring ball bearing swivel wheels provide an effortless glide.
• OPTIONAL EXTENSIONS: The Bora PM-3245T Mobile Base Extension Kit (sold separately) allows you to expand the size of your PM-3550 as needed to accommodate larger objects.

User questions & answers

Question:	Do the pm-3036 extension rails work with the pm-3550 mobil base
Answer:	For all Adult and Boy's & Girl's sizes, the weight limit is 250 lbs. For Children (3T-8yrs) its 100 lbs. If you have any further questions, please dont hesitate to reach out.
Question:	What material are the wheels made of? I need something that will not disintegrate over time due to 115 degree summer heat
Answer:	Thank you for asking us this question. We can customize our product, to help fit your needs. Simply contact us, with your needs, and we will work with you, in understanding what your needs are. We can also customize our harness to add leg straps. Our leg strap design does not go around the crouch area, in order to increase comfort. Send us a message. We are here for you.
Question:	How much does it raise the power equipment above floor
Answer:	I would like to address your concerns. The single handle is to help with supporting the individual in the center most part of the body, but there are also handles on either side of the center single handle that can also be used. The harness is not limited to the single grey handle in the middle. Legs straps are not currently outfitted, and is not a requirement to keep the harness from riding up. If you require leg straps, you can certainly request this option, by simply asking us, and we will work with you and your needs. Thank you
Question:	What’s the maximum recommended footprint for spanning extension rails and couplings on all sides of the mobile base? 44”x
Answer:	The belt is 4 inches wide. Found it very secure and helpful guiding my husband down the stairs in our apartment.

Product features

BORA Portamate PM-3550 Super Duty Mobile Base - All Swivel

The PM-3550 Super-Duty All-Swivel Mobile Base is an industrial-strength, fully-adjustable rolling platform with four all-swivel wheels to move even your heaviest equipment around the shop at the touch of a finger.

Locking Foot levers

Easy to use foot-operated locking levers at each corner, which locks the base firmly into place. 3 inch non-marring ball bearing wheels and casters for an effortless glide.

Versatile

Four swivel wheels for superior handling perfect for maneuvering long equipment and workbenches in tight spaces.

Extension available

Purchase the Bora Portamate PM-3245T Mobile Base Extension to expand your existing PM-3500 or PM-3550 Mobile Base from 32" to 45" to accommodate 30"-53" fence systems (sold separately).

Multifunctional

The increased weight capacity makes it ideal for larger (and heavier) square/rectangle objects, like metal cabinets, toolboxes, safes, gun cabinets, and much more.

Product description

Young carpenters can turn out real woodwork projects with this 4-in-1 Woodshop Carpentry Tool! This totally safe working tool combines a jigsaw, lathe, drill press, and sander—it's a great way for kids to craft, create, build, and otherwise discover skills that can jumpstart a lifelong source of enjoyment and valuable hand skills, such as turning, sawing, drilling, and sanding. This built-for-kids tool contains many built-in safety features that protect kids from the possibility of injury. Safety goggles included. Note-the PLAYmake Woodshop Tool is designed to snap onto any building block system. This carpentry skill-building set also includes practice wooden dowels, wood samples, a power supply, and a deluxe project book to get the creative juices flowing! As our world turns more and more towards technology, hand skills are increasingly satisfying to master, and the thought processes required for carpentry dovetail beautifully with math and engineering skills.

• 4-IN-1 WOODSHOP TOOL FOR KIDS: This super safe working woodshop tool is a great way for kids to craft, create, and build. Young carpenters can turn out real wood works in no time. The combination tool features a jigsaw, lathe, drill press, and sander, and also includes practice wooden dowels, four wood samples, power supply, and deluxe project book.
• SAFE TO USE: With multiple built-in safety features, kids are free to craft whatever woodwork projects they can imagine without the risk of injury. Safety goggles are included for extra protection.
• DEVELOP SKILLS WHILE HAVING FUN: Kids develop carpentry skills such as turning, sawing, drilling, and sanding that can jumpstart a lifetime of enjoyment.
• EXTRA PIECES INCLUDED: Besides the tool, this set also includes practice wooden dowels, four wood samples, power supply, and a deluxe project book.
• ENGAGE IN IMAGINATIVE PLAY: This multi-faceted woodworking tool is a great way to inspire kids to disconnect from screens and use their math and engineering skills to develop the imagination.

User questions & answers

Question:	does this come with wood
Answer:	I don't think it did. But even if it did it was one or two pieces. You will need to buy more wood for sure.
Question:	What are some of the projects that it has instructions for
Answer:	Great question! The following projects have assembly instructions: Birdhouse, Candle Holder, Airplane, and Alphabet Cut Out. - HearthSong Customer Service
Question:	Can you use any wood with this or just the predrilled/cut pieces? My son wants to make his own training knives. Could this be done on this machine
Answer:	It is really good with thinner wood and softer wood. My kids have preferred to get 1/4 inch basswood from the local hardwood store, but the jig has difficulty cutting though anything harder. CoolTools also creates a stronger version called UniMat that can handle harder materials...this is designed as the “kid version” and whereas it is very flexible, it is restricted to thinner pieces and softer woods.
Question:	Where can I get more blades for the saw
Answer:	You can either order them on Amazon, or send an email to the maker of the company. It is posted on Amazon as “The Cool Tool saw blades”. It comes as a set of 10.

Product description

The table is suitable for Mini Drill and drill bracket series.

It can also apply to other suitable machine.

The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy

Table size: 365 × 200 mm. Weight: 6.8 kg

X axis distance is 350 mm. Y axis distance is 100 mm.

Hand Wheel Scale Per Ring is 3 mm.



Package includes:

1 Pc of Milling table of Heavy Version

• The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
• It can also apply to other suitable machine. The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.
• Table size: 365 × 200 mm. Weight: 6.8 kg
• X axis distance is 350 mm. Y axis distance is 100 mm. Hand Wheel Scale Per Ring is 3 mm.

User questions & answers

Question:	What is the actual X-axis travel distance for the heavy version
Answer:	3.0625" overall height (3 1/16")
Question:	Why does the medium model have more X &Y travel than the large model
Answer:	metal
Question:	What is the length and width of the cast iron base
Answer:	Thank you raising your concerns. The 2.5" milling vise is not included. You will need to purchase another 2.5" milling vise. What You Get: Milling Working Cross Table *1; Accessories box *1(hexagon wrench *1, standard fixture *1, M8 bolts and nuts *2); Manual *1. Any question, please don’t hesitate to let me know. Thank you for your attention to this product.
Question:	As this unit sits on a bench. What is the approximate height from the bench to the top of the table? Thanks
Answer:	I bought my clamps at harbor freight and Grainger supply

Product description

Some jobs go beyond the workshop; some jobs make you come to them. For the jobs that demand function, strength and mobility we present the All-Terrain Vise by Wilton. Secure it in your hitch or mount it on your bench, the ATV is locked, loaded, and ready to go.

• VERSATILITY: Can be mounted on a bench or trailer with the included mounting bracket.
• COMPATIBILITY: Fits a standard 2" hitch, and includes a hitch pin for security.
• LIGHTWEIGHT: Weighting just under 40 pounds, and with a carrying handle, the ATV is designed for easy transport.
• LOCKING HANDLE: Patented 360° locking handle can be secured for driving, or repositioned while working.
• WEATHERPROOF: Water-resistant coating provides all-weather protection while vise is on your truck.

User questions & answers

Question:	Can it be left on in the rain basically 24/7? Have a yard truck I’d like this for but don’t want it rusting
Answer:	This unit weighs 57.2 pounds and has adjustable feet not wheels.
Question:	Do the set screws really remove all the "play" in the fit between the vise and receiver hitch
Answer:	WHS-109F is a freezer. I have one. It is a very nice small freezer - 3.0 cubic feet of icy cold.
Question:	In the vice tube that slides into the receiver, could the pin hole be cross drilled on the side without the hole? Or is there something in the tube
Answer:	19 1/2 inches - just the same as the overall width of the freezer :)
Question:	What county is this made in
Answer:	Yes it is. $29 yearly estimated energy cost. 240kWh estimated yearly electricity use.

Product description

Remember when power tools were actually powerful? WEN’s 12-inch swing, variable speed drill press with laser centering device, is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This bench-top, cast iron drill press has the power to drill through metal, wood and other materials. Max drill capacity is 5/8” in 1” thick cast iron. The variable speed feature allows you to target in the exact speed (infinitely from 580-3200 RPM) that works for your project. While you are working you simply move a lever and adjust the speed as needed. No pulleys and belts to change! Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout powered by LED’s displays the running speed. Constructed with a rigid frame consisting of cast iron: head, table, and base, ensures accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 5/8” chuck with MT2 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachments, drum sanders, circle cutters, etc. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill with laser precision? Remember WEN. DO NOT use power tools in the presence of flammable liquids or gases. Drill press Base -10 x 16 inches

• Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
• Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches
• Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
• 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2"
• Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch

User questions & answers

Question:	base size
Answer:	It is a lot like a car tire. Solid rubber
Question:	Does the drill press come pre-assembled? If not, how complicated is the assembly
Answer:	nope
Question:	it says 2/3HP how many amps does the motor say on its side 9 amps is 2/3HP what is on the side of the motor what watts or amps is the motor rated
Answer:	Definitely ok to use outside.
Question:	I see the spindle travel is 2" - 3 1/8" depending on model. What does the length in the name (8", 10" or 12") refer to
Answer:	Hello, Thank you for your question. The shelves are removable. Regards Ann