14 best mortising machines

• Drill square sided mortises with this Bench top Mortising Machine
• Rigid cast iron construction and a rack and pinion head control mechanism slides on a dovetailed column with adjustable ways to ensure precision mort
• A pneumatic return strut eases the step and repeat cycle of multiple drilling

User questions & answers

Question:	How do you adjust the fence? Is it easy and accurate? Thoughts on getting the work piece into position
Answer:	Very thin and flexible but they stay in place very well.
Question:	does this machine come with chisels
Answer:	Yes, the silver dangley pair and the plain silver tunnels are both screw fit types.
Question:	what is the chusk size? 3/8 or
Answer:	No only the size you order them in.

Product features

1/2 HP Benchtop Mortising Machine

Rigid cast-iron construction and rack-and-pinion head control on a dovetail column help ensure this Benchtop Mortising Machine will produce precision mortises every time. A pneumatic return strut eases the step-and-repeat cycle when making multiple mortises. A riser block is also included to increase the maximum stock thickness to 6". The 1/2 HP motor powers through any type of wood and the easy-access drill chuck makes it simple to change chisels. Includes 4 mortising chisels!

Includes 1-3/4" Riser Block

Dovetail Column with Adjustable Ways

Multi-Positional Handle

Adjustable Depth Stop

Specifications:

• Motor: 1/2 HP, 110V, single-phase, 6A
• Spindle speed: 1725 RPM
• Spindle taper: JT #2
• Spindle travel: 3-1/4"
• Chuck size: 3/8"
• Collar size: 5/8"
• Maximum stock width: 8-1/2"
• Maximum stock thickness with extension block: 6"
• Maximum mortising depth: 3"
• Maximum chisel travel: 4-5/8"

Product description

Benchtop Mortise Machine

The Model MS3816R weighs only 95 pounds and is made of cast iron and steel. It is sturdy and easy to handle. This square tenon machine is easy to install and clean. This is a multifunctional hollow chisel mortiser machine you deserve.

Powerful Performance

Labor-Saving Design

Safe & Precise

Extra Accessories

key Features

All Copper Motor

This jet mortiser machine uses a full copper motor, with built-in wind blades to remove wood chips, and the rear end helps make the drilling smoother.

Humanized Design

This mortising tool machine adopts a gear transmission design. The 20'' ultra-long handle pushes down the large gear to run, which can save users' energy during operation.

Safety Switch

To improve the safety of operation, this mortiser machine woodworking is designed with a safety switch, which can be used immediately and can also terminate operation in an emergency.

Movable Work Bench

This square tenon machine has a cast iron workbench that moves back and forth, left and right, wear-resistant and durable, and can quickly clamp the workpiece to achieve precise cutting.

Additional Chisel Set

This mortiser machine woodworking includes a 13mm drill chuck with a stable drill, a 3/8 tenon, a chisel holder, a wrench for installing the drill clamp, and four hex wrenches.

Wide Application

This mortiser machine is multi-purpose and can be used not only for the processing of wood products but also for the processing of metal materials.

Specifications

Model Number: MS3816R

Chisel Capacity: 6-12mm

Chuck Capacity: 13mm

Bushing Size: 19.05mm

Package Content

1 x Bench Mortiser

1 x Mortise Drill Chuck

1 x Tenon Cutter

1 x Chisel Holder

• 【POWERFUL PERFORMANCE】 - This mortising machine is equipped with a 1/2HP all-copper motor, with a speed of up to 1700 rpm and full power, which can cut materials quickly and stably.
• 【LABOR-SAVING DESIGN】 - The gear transmission and long handle design save the effort and allow people to easily and efficiently complete each cut without feeling tired for a long time.
• 【SAFE & PRECISE】 - This square tenon machine has a safety switch, which can be quickly started and used to ensure safe operation. The movable table, pressing the handwheel, which can quickly move the workpiece back and forth, left and right, and cut accurately.
• 【EXTRA ACCESSORIES】 - The accessories of this product include a 13MM drill chuck, a 3/8 tenon cutter, a 19mm chisel holder, and four hex wrenches, which provide more possibilities for this tenon machine.
• 【WIDELY USED】 - This multifunctional mortise and tenon machine can not only cut wooden mortises such as circles, squares and special squares but also can be used for circular grooves, internal grinding, metal drilling, etc.

User questions & answers

Question:	Does it take 4c4 inch material
Answer:	This mortiser is not available in 220 V.
Question:	Can this make 3/4” mortise
Answer:	I don't think it would be a very good drill press. First, the chuck is small, so you'll only be able to use small bits. You can buy table drill presses cheep.
Question:	How Wide a board can this handle? Can it handle 5 1/2 to 6 inch wide boards
Answer:	Delta’s bits only go to 1/2” but you can buy other brands up to 1” but you will need to be able to make a shank adapter. Delta tries to make you purchase their bits by using a non standard sized shank.
Question:	How much distance under the chisel? Or in other words how wide a board can this machine mortise
Answer:	The way it comes from the box I don't believe it will mortise 6" stock. You can rotate the head 180 degrees to mortise larger stock but I have never done that with my machine. I think that it may be possible to install bushings (3/8" pipe nipples of sufficient length and longer bolts to attach column to base) between the column and base to raise the column enough to allow clearance for 6" stock.

Product features

All Copper Motor

This jet mortiser machine uses a full copper motor, with built-in wind blades to remove wood chips, and the rear end helps make the drilling smoother.

Humanized Design

This mortising tool machine adopts a gear transmission design. The 20 " / 50 cm ultra-long handle pushes down the large gear to run, which can save users' energy during operation.

Safety Switch

To improve the safety of operation, this mortiser machine woodworking is designed with a safety switch, which can be used immediately and can also terminate operation in an emergency.

Movable Work Bench

This square tenon machine has a cast iron workbench that moves back and forth, left and right, wear-resistant and durable, and can quickly clamp the workpiece to achieve precise cutting.

Additional Chisel Set

This mortiser machine woodworking includes a 13mm drill chuck with a stable drill, a 3/8 tenon, a chisel holder, a wrench for installing the drill clamp, and four hex wrenches.

Wide Application

This mortiser machine is multi-purpose and can be used not only for the processing of wood products but also for the processing of metal materials.

Benchtop Mortise Machine

The Model MS3816R weighs only 95 pounds and is made of cast iron and steel. It is sturdy and easy to handle. The mortice machine comes with a standard three-jaw key holder for securely grasping the mortice. It also has a quick-set depth limiter and a removable toggle switch to prevent accidental or unauthorized use of the tool. This square tenon machine is easy to install and clean. This is a multifunctional hollow chisel mortiser machine you deserve.

Product description

Powerful 1/2 inch mortise

Easy to set up and operate, the Delta 14-651 1/2-Horsepower Mortiser is specially designed for the professional user and includes a multi-position hand lever and rotating mortising head for tricky off-table projects. Capable of punching smooth mortises in a range of stock--including hardwoods--this professional bench mortising machine is a must-have addition to any shop.

The Delta 14-651 1/2-Horsepower Mortiser At a Glance: 1/2-HP motor generates 1725 RPM 3/8-inch-capacity drill chuck and key Adjustable rack-and-pinion fence Multi-position feed lever

Multi-position hand lever provides the extra torque needed to mortise especially hard woods.

Heavy-duty cast-iron base provides stability and control. View larger

Adjustable Height and Rotating Head Provide Versatility

Setting up the 14-651 is a breeze thanks to features such as the easy-access 3/8-inch-capacity drill chuck and adjustable rack-and-pinion fence. A height attachment increases the mortiser's capacity by 1-3/4 inch, and if you still need more height, you can simply turn the 14-651's head 180 degrees to mortise off-table.

Engaging and releasing via an efficient rack-and-pinion system, the 14-651's head features an adjustable dovetail option for intricate jobs. The lever locks down and is long enough to provide that extra torque you need to mortise especially hard woods.

Robust Motor Guarantees Professional Results

Powered by a 1/2-horsepower, 120-volt, 60-hertz, single-phase induction motor, the 14-651 produces smooth-sided, burn-feed results. The mortiser features a feed speed of 1,725 RPM and a multi-position feed lever for matching the correct position to the job.

Additionally, the adjustable depth stop locks down, so you don't have to worry about cutting too deep, and a chuck key/hex wrench simplifies bit and chisel changing.

Stable and Sturdy for Tough Jobs

Stable and sturdy, this machine measures 22.4 x 18.6 x 16.4 inches (WxHxD), weighs 77 pounds, and includes a heavy-duty 16-3/4-inch by 13-1/2-inch cast-iron base with center through hole, as well as a two-piece safety fence.

The 14-651 arrives with a tool-and-chisel tray, a multi-position feed level, and a gas-filled head stabilizer for smooth, steady operation. Also, four mortise chisels and bits in 1/4, 5/16, 3/8, and 1/2-inch increments are included, so you have everything you need to get started.

What's in the Box

Mortiser; 3/8-inch-capacity chuck and key; four mortising chisels and bits; tool-and-chisel holder; and riser block.

From the Manufacturer

The Delta 14-651 bench mortiser is key for woodworking, cabinetry, furniture and boat building. The 1/2 HP motor and 3/8-inch capacity chuck mortises hard and soft woods. It has four chisels and bits (1/4-inch x 1/4-inch; 5/16-inch x 5/16-inch; 3/8-inch x 3/8-inch; 1/2-inch x 1/2-inch). A cast iron base, adjustable fence and head ease adjustments between projects. 9 3/8-inches under head to base with a 5-inch stroke accepts multiple sizes assemblies and stock. The head can be turned 180 degrees and re-mounted for off-table mortising; the height attachment adds 1-3/4-inch under the head delivering excellent versatility in the shop. An adjustable stop makes repeat mortises easier. The tool comes with chuck key/hex wrench for bit/chisel changes.

• Easy and open access to drill chuck for bit changing
• Large cast-iron base with center through hole
• Adjustable rack and Pinion fence and rack and Pinion head raising and lowering
• Mortising head column can be turned 180 Degree and remounted for off-table mortising
• Adjustable fence and hold down; Adjustable dovetail way on mortising head

User questions & answers

Question:	can I buy this machine to 220v 50hz (EU pat
Answer:	Hello, Thanks for your inquiry. There are no markings on the line. We are currently looking into adding such markings in the future.
Question:	Trying to have just one piece of equipment, Will this work as a drill press without the mortice bit
Answer:	It's maybe an 1\8 inch wide, and 1\4 inch thick, but you can take it off, which I did.
Question:	what is the largest bit it can take
Answer:	Being about a 1/4" metal strip, it is too stiff to fall down at such a precise bend. Most likely you would have to get over the wall, then project the cable down. Even then, it may easily curve and not go straight down. A alternative could be a metal nut (3/4" or more), tied to a string, then dropped down the wall. this will work if the wall has no internal insulation or other obstructions. Good luck.
Question:	to clarfy a question already asked. i would like to mortice a piece that will be 6" tall, targeting a 2" deep mortise. will this machine work? max
Answer:	Yes definitely. I used it to run CAT6 to five rooms in my house last week and it worked great. Some tips in case they help - drill a very small hole in the ceiling directly above where you want your drop and stick a coat hangar through it to get a point of reference in the attic. Also, I would fish string through the wall first and then pull the cable once string is through. Maybe basic stuff but I didn't know any of this before I started...

• 【POWERFUL PERFORMANCE】 - Full power, which can cut materials quickly and stably.
• 【LABOR-SAVING DESIGN】 - The gear transmission and long handle design save the effort and allow people to easily and efficiently complete each cut without feeling tired for a long time.
• 【SAFE & PRECISE】 - The movable table, pressing the handwheel, which can quickly move the workpiece back and forth, left and right, and cut accurately.
• 【WIDELY USED】 - This multifunctional mortise and tenon machine can not only cut wooden mortises such as circles, squares and special squares but also can be used for circular grooves, internal grinding, metal drilling, etc.
• 【SERVICE】- USA Warehouse: CA NJ Warehouse，UPS or FED Shipping delivery 3-5 business days .Gdrasuya Customer department will reply your information within 24 hours. If you have any questions, please feel free to contact u

User questions & answers

Question:	Will this work on a Shopsmith Mark
Answer:	Yes
Question:	will this attachment work with a ryobi bench drill press
Answer:	This type of drill (square chisel) must be used in a dedicated Mortising machine
Question:	Does this come with everything shown in the description pictures, the drill bits etc
Answer:	These only work with a drill press
Question:	My drill press has a 53mm quill diameter. Will the adapters fit
Answer:	china

Product features

Brand introduction

The Gdrasuya10 brand was established in 2019, integrating product development, production and sales. Its products focus on industrial products, and produce high-quality products, composed of independent designers and co-designers, to provide creative support for the brand. Gdrasuya10 focuses on industrial products, while operating industrial product categories, covering the areas of daily life, integrating R&D, design, supply and sales to provide practical products and life inspiration for people's daily lives. With the development of economic industrialization and great material abundance, social pressure is also increasing. Under the pressure of the times, groups caught between the demands of the outside world and their own unique needs use self-deprecating and self-defeating methods to relieve anxiety. They pay more attention to the realization of their personal values, choosing to no longer meet the requirements of society and others, but to respect their own inner voice.

Product information

Woodworking Bench Mortiser Square Hole Chisel Drilling Machine Location Tool Tenon Joint Mortising Attachment Chisel Bit Mortise Tenon Drill for Bench Drill Steel

LABOR-SAVING DESIGN

The gear transmission and long handle design save the effort and allow people to easily and efficiently complete each cut without feeling tired for a long time.

WIDELY USED

This multifunctional mortise and tenon machine can not only cut wooden mortises such as circles, squares and special squares but also can be used for circular grooves, internal grinding, metal drilling, etc.

Specification

Material：steel

Applicable machine tools: drilling machine

Size: approx 45*35*20cm

Packing including

1* Locator Set (excluding bench drill)

4 Bits Steel

Bench Drill Locator Set for Mortising Chisels Tenoning Machine with 4 Bits Steel

• Mortising attachment converts a drill press into an accurate mortising machine for woodworking applications.
• Allows user to easily chisel accurate, professional-looking square holes.
• Attachment fits over drill presses with spindle sliding bush diameters of 52mm, 55mm, 57.5mm,60mm and 65mm.
• This product is used with a bench drill, and it has size requirements for the bench drill used.
• This product has a requirement for the distance between the drill chuck and the table when in use. The diameter of the clamping part of the square hole drill used in this product is also required.

User questions & answers

Question:	Will this work with a shop fox radial drill press
Answer:	That is a question for the seller I found the sizes to be completely accurate to what they stated

Product features

Tenoning Machine Tool Chisel Mortising Mortise Locator Set Attachment for Drilling Machine

Specification:

• Material: steel
• Applicable machine tools:drilling machine
• Size: approx 45*35*20cm/17.7*13.8*7.9in

Packing including：

• 1* Locator Set (excluding bench drill)

Product description

Feature:

Material: Special Steel

Hardness: HRC48-50

Size: 1/4" (6.4mm), 5/16" (8mm), 3/8" (9.5mm), 1/2" (12.7mm)

Weight: Approx 160grams, 200grams, 205grams, 210grams

Clamping shank diameter: 19mm (Round)

Fit for mortising machines and drill press attachments.

Caution:

1. NOT suitable for handheld drill. ONLY suitable for 3/4" (19mm) mortising machines and drill press attachments.

2. These Square hole drill bits are mainly used for woodworking.

3. Drill holes using these drill bits, if you want the square hole become more tidy then you should chisel the detail part by hand.

4. To avoid the drill bits become overheated and get burned up due to fast rotary friction, we suggest use some cutting fluid to keep the bits cold during usage.

Package Included:

1PCS 1/4" (6.4mm) Drill Bit

1PCS 5/16" (8mm) Drill Bit

1PCS 3/8" (9.5mm) Drill Bit

1PCS 1/2" (12.7mm) Drill Bit

• ❤SQUARE HOLE DRILL BITS❤ These Bits Can Be Used to Make Square Hole for Wood, Please Note That The Mounting Collar Is 3/4" 19mm, So They Are Only Suitable for 3/4" (19mm) Mortising Machines and Drill Press Attachments (NOTE: NOT for Handheld Power Drill).
• ❤4PCS❤ Package Includes 4 PCS Drill Bits in Total, at The Size of 1/4"(6.4mm) 5/16"(8mm), 3/8"(9.5mm) , 1/2"(12.7mm).
• ❤SHARP & DURABLE ❤ Made of Special Steel with High Hardness, Which Are Sharp and Durable (Please Pay Attention to The Sharp Edge When Use).
• ❤CONVENIENT DESIGN ❤ With Slot on The Side of Drill Bits, Which Is Very Convenient to Remove The Shavings.
• ❤PACKAGE❤ Package Includes 4 PCS Wood Square Hole Drill Bits. If You Have Any Question, Please Contact Us.

User questions & answers

Question:	Does not fit! i have a 10 in. drill press with exactline laser alignment system
Answer:	I'm 1/2 and they are very light and very small. They don't weigh down my ears at all. They are a little short, and slightly smaller than they should be, but they look good and fit comfortably.

Product description

MAX-CRAFT 1/4" Woodworking Square Hole Mortise Chisel Drill Bits Set, Wood Hole Saw Mortising Chisel Countersink Drill Bit Tool Kit Square Hole Cutter for Wood in Mortise Machine ▲DIAMETER: 1/4 INCH ▲FLUTE LENGTH: ▲OVERALL LENGTH:

• ❶ MATERIAL:Wood Square Hole Mortising Chisel Drill Bit is made of special steel, through Heat Treatement to keep the hardness to be HRC 48-51, Lengthened Core and high concentricity during application.
• ❷ TIP AND EDGE:The best designed Drilling Point tip and 4 Cutting Corner to enable the fast drilling and penetrating into working pieces of wood very smooth and fast.
• ❸ OPERATION:It always is used with mortise and tenon machine with double effect, and electric drill, hammer and other tools is required for punching square hole in wood
• ❹ ADVANTAGES:The tool can be great helpful to reduce labor intensity of construction workers, speed up effiency and redcuce cost in construciton, installation, renovation, decoration industies.
• ❺ APPLICATION:For best professional mortising chisel drill bits suitable for mortising machines and drill press and square hole drill is mainly used for woodworking aspects.

User questions & answers

Question:	Can they be used on drill press
Answer:	the model you listed is a cooktop, this part is a temperature sensor for an oven so no it will not work but if you let us know whats going on with your model we may be able to help you or at least put you on th right direction as to what part you may need
Question:	Does it fit the delta 17-935 Mortising attachment
Answer:	Sorry, we just have 0g (8mm), 00g (10mm), 1/2" (12mm), 9/16" (14mm) , 5/8" (16mm), 11/16" (18mm), 3/4" (20mm).
Question:	What is the diameter of the shank on the spiral bit? Thz
Answer:	I like the way they fit when I purchased them, but be mindful that once your ear relaxes and gets comfortable with the jewelry it can always slip like any other plugs.
Question:	What is the diameter of the chisel shank
Answer:	These do run small/loose. If you’re having a hard time getting them in I would try after a hot shower but don’t push it. You don’t want to split your ear lobe. Maybe try sizing down and then gradually gauge up to your desired size. Use neosporin when gauging to heal your inner lobe and do not rush the process. Of course you can always stop into any local piercing/tattoo shop and seek professional advice, which is best. Good luck.

Product description

Features:

Five Size:1/4 Inch (6mm), 5/16 Inch (8mm), 3/8 Inch (9.5mm), 5/8 inch (16mm), 10mm.

Material: Made of bearing steels, heat treatment, high hardness, lengthened core, high concentricity.

Cost-Effective: Reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs for construction, installation, renovation, decoration industries.

Fit Machine: Great for drilling square holes in wood with a mortising machine or a mortising attachment. Fits all mortising machines and drill press attachments.

Square Hole Drill: Square hole drill is mainly used for woodworking aspects.



Specifications:

Material: bearing steels

Color: silver

Size:about 1/4 Inch (6mm/0.24inch), 5/16 Inch (8mm/0.31inch), 3/8 Inch (9.5mm/0.37inch), 5/8 inch (16mm/0.63inch), 10mm/0.39inch



Package included:

5pcs x woodworking square hole drill (different sizes)



Note:

1. Due to the light and screen difference, the item's color may be slightly different from the pictures.

2. Please allow 0.5-2 cm differences due to manual measurement.

• 【Five Size】1/4 Inch (6mm), 5/16 Inch (8mm), 3/8 Inch (9.5mm), 5/8 inch (16mm), 2/5 inch (10mm).
• 【Fit Machine】Great for drilling square holes in wood with a mortising machine or a mortising attachment. Fits all mortising machines and drill press attachments.
• 【Square Hole Drill】Square hole drill is mainly used for woodworking aspects.
• 【Material】Made of bearing steels, heat treatment, high hardness, lengthened core, high concentricity.
• 【Cost-Effective】Reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs for construction, installation, renovation, decoration industries.

Product description

Fish premium hollow Mortise and Chisel sets are constructed of special steel and are used for drilling and mortising square holes in soft and hard woods. The set consists of 1 bit and 1 chisel. Fits all mortising machines and drill press attachments. Made in Austria.

• Fits all mortising machines and drill press attachments
• Set consists of 1 bit and 1 chisel
• Made of the highest quality tool steel
• High performance flute design geometry for superior chip extraction
• Made in Austria

User questions & answers

Question:	Will the 3/4-inch mortising chisel work in a Delta 17-024 mortising jig
Answer:	3/8
Question:	Will this fit a Jet mortising machine? What is the shank diameter of the hollow chisle
Answer:	Yes
Question:	Sorry will this bit fit in a PowerMatic model 1791264K
Answer:	Per the model # of the oven provided, GE recommends you to use part # WB21X5301. Shane Appliance Parts Pros Team
Question:	will this in a Powermatic model 1791264K
Answer:	ZEU36RBF2BB is an electric cooktop and would not use a temperature sensor. Looks like it uses control boards in place of an oven control thermostat.

Product description

Specification:

Material: Steel

Applicable machine tools: Drilling machine

Size: Approx 45*35*20cm

note:

1. This product is used with a bench drill.

2. This product has size requirements for the bench drill used.

3. This product has a requirement for the distance between the drill chuck and the table when in use.

4. The diameter of the clamping part of the square hole drill used in this product is also required.

Packing including：

1 * Locator Set (excluding bench drill)

• 【Locator Set】Locator Set of Bench Drill for Mortising Chisels Tenoning Machine Accessories Woodworking Locator Set SteelBest with 4 Bits.
• 【Locator Size】Approx 45*35*20cm.
• 【Locator Applicable Machine Tools】 Drilling machine.
• 【Package Includes】1 x Locator Set (excluding bench drill).
• 【Guaranteed】This item will ship from USA, delivery time need about 5-8 days. If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your purchase, we will provide a money-back guarantee.

Product description

JET JBM-5 Benchtop Mortiser, 1/2" Capacity, 1/2HP (708580)

Ideal for professional furniture makers as well as for home woodworkers, Jet's affordable 708580 JBM-5 benchtop mortiser features a 1/2-horsepower induction motor and is designed to take up to 1/2-inch chisel bits. The dependable rack-and-pinion head adjustment gives you accurate drilling control, while its heavy-duty cast iron and steel construction provides durability and stability for years of use.

Dependable mortiser for home woodworkers or professional furniture makers (view larger).

Features

At only 44 pounds, the Jet 708580 is sturdy but also easily maneuvered, plus it reverses on its base to allow for mortising in long stock. The 4-3/4-inch head stroke is great. Bits are easy to change. Just flip open the steel door on either side (other models on the market often have doors made of flimsy plastic) to gain easy access to the chuck. And, thanks to the 4-inch chuck key, there's little chance of banging or scraping your knuckles while switching bits.

The mortiser's feed handle adjusts so you can choose the most comfortable position for each application, and it also offers a quick-setting depth stop and a removable toggle switch that prevents accidental or unauthorized use of the tool. It's set on a heavy-duty cast-iron base with four predrilled mounting holes. Other features include a three-jaw drill chuck that keeps a positive grip on mortising bits for chisels up to 3/4-inch in size, two hinged side doors for easy access to the chuck, and a reversible column for mortising larger stock. It's backed by a 5-year limited warranty.

Specifications

What's in the Box

One Jet 708580 JBM-5 benchtop mortiser, one hydraulic cylinder, one handle, 3/4- and 5/8-inch chisel bushings, one spindle extension, one chuck key, one table, hold down, fence assembly, screws, and owner's manual.

Combines 1/2-horsepower motor for solid performance and a heavy-duty cast iron and steel construction.

From the Manufacturer

For all the projects you do that require mortising, get solid performance and trouble-free operation with this 1/2-horsepower, 115-volt , benchtop mortiser from JET. The rack-and-pinion head raises and lowers for positive drilling control while the long, multiposition splines permit repositioning of the feed handle for perfect handle position. There's a three-jaw drill chuck with an extended chuck key for positive grip on the drill bit. Two hinged side doors allow for complete drill chuck access while the heavy-duty cast-iron and steel construction adds durability and stability to the base. A removable toggle switch prevents accidental turn-on. 1/2-inch chisel capacity and 4-3/4-inch head-stroke. This set comes with three bits: 1/4-inch 708590, 3/8-inch 708592, 1/2-inch 708593.

• ACCURATE POSITION CONTROL: Dependable rack-and-pinion head adjustment.
• UNIFORM MORTISE DEPTHS: Quick-adjust depth stop.
• OPTIMUM HANDLE POSITION: Long mortising handle let you reposition the feed handle for easier operation.
• MORTISE LARGER STOCK: Column is reversible.
• SAFE CONTROLS: Removable On/Off toggle switch prevents accidental or unauthorized use of the tool.

User questions & answers

Question:	Is this 50hz or 60hz
Answer:	Dear friend,the ground pin should be plugged into a ground receptacle of an unused nearby outlet. (the round hole on a normal 110 outlet),welcome use Jacazooy dryer adapter cord.
Question:	What chisels does this come with, if any? The description says it comes with three, but I didn't see any further mention of the mortising chisels
Answer:	Dear friend,we sell the dryer adapter cord ,the green wire is ground which does not stop you to power your 4-Prong Dryer which mean you will Dryer will still function while the grounding wire is not in placing. It is very important to ground your dryer in case there is a fault or electricity leaking. Please use regular home extension cord to bring regular household outlet closer to your dry and plug in that green wire into the extension cord of the ground slot. Grounding is very important that is why new code require 4-Prong dryer outlet.
Question:	What size stock fits with the fence? I know with larger stock the collumn can be rotated 180 degrees, but with the fense can it take up to 6" stock
Answer:	The Green Wire can be plugged into any household regular grounding hole.Thanks for choosing JACAZOONY 4-Prong to 3-Prong Dryer Adapter.
Question:	What is the size of the chuck key? Got a used one without a key, and none of my chuck keys fit
Answer:	Hello,my friend. It is pretty easy. What you need to do is plug your 4 prong plug into the female end of this dryer adapter converter, and then plug in the male end to the wall outlet of your house.

Product features

JET Benchtop Mortise Machine with 1/2" Capacity, 1/2 HP, and 1,725 RPM

This conveniently-sized, but powerful Benchtop Mortise Machine can be used on a bench or an independent stand. The heavy duty construction provides durability, consistency, and stability needed to produce quality results every time.

Toggle Switch

Removable On/Off toggle switch prevents accidental or unauthorized use of the tool.

Mortising Handle

Long, multi-position mortising handle allows you to reposition the feed handle for easier operation and optimum handle position.

Drill Chuck

Three-jaw drill chuck keeps a positive grip on mortising bits with up to 3/8" diameter shanks.

Product description

Remember when your holes were square? Strengthen your workpieces with the WEN Benchtop Mortising Machine. Our powerful 5-amp motor provides you up to 1725 rotations per minute, making easy work out of even the toughest of woods. The spacious chuck accepts bits anywhere from 1/32 of an inch to 1/2 of an inch (1/4 to 1/2 inch for chisel bits), giving you the versatility needed to take on any project. With spindle travel of 4-1/4 inches and a max stock thickness of 4 inches, you’ll be able to create sturdy and reliable mortises up to 3 inches in depth. The pneumatic spring head returns easily and smoothly while the spring-loaded fence allows for both fine-tune and large scale adjustments. The spacious table measures in at 13-1/2 by 6 inches with a work-piece hold down that accepts boards up to 3-1/2 inches thick. The adjustable feed handle rotates freely to prevent collision with your workpiece, springing back into place once you select your optimal start and stop points. The onboard depth stop prevents you from drilling past your intended distance. The spring-loaded protective chip guard easily flips up and down depending on your current needs. This package also includes three chisel bits, measuring in at 1/4, 3/8 and 1/2 inch in size, along with an extra chuck extension adapter, a 3/4-inch chisel bushing, and a 10 by 8-inch cast iron base. And because its a WEN mortiser, your bench top mortising machine comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a friendly customer help line, all to make sure you remember WEN.

• 5-amp motor with 1/2-inch chuck provides up to 1725 rotations per minute
• 4-1/4 inch spindle travel creates mortises up to 3 inches in depth
• Features a spacious 13-1/2 by 6 inch table and a 10 by 8 inch cast iron base
• Onboard tool and chisel storage maximizes organization while keeping bits accessible
• Includes three chisel bits (1/4, 3/8, and 1/2 inch), a protective chip guard, a chuck extension adapter, 3/4-inch chisel bushing, an adjustable handle, spring-tensioned fence, depth stop, and a two-year warranty

User questions & answers

Question:	How accurate are 90 degree perforations
Answer:	I use the drill set to drill holes for screws for hinged locks; door hinges; pad locks etc
Question:	I purchased this mortised but can’t find replacement chisels anywhere. Can you help? Are there other brand chisels that will fit this machine
Answer:	Hi, this item is universal, but you need to confirm whether the size is appropriate.
Question:	power source 120v or 240v
Answer:	It is a decent machine. The motor is powerful. It has the right set-up using the motor's weight to help push the mortising chisel/bits down etc. However The fence is not finely machined, to do accurately placed, repeatable mortises you will be making your a lot of your own templates. You might also consider buying a cross-sliding drill press vice. I've found that the best templates control the bits path above the intended site of the mortise. in other words you clamp the piece under the template (which should be at least 3/4" thick) that has a pre-cut square hole of the same size as the bit.
Question:	Can this be used as a standard drill press as well
Answer:	Yes. Comes with 4 chisels.

Product features

WEN 43012 5-Amp Cast Iron Bench Mortiser with Chisel Bit Set

Remember when your holes were square? Strengthen your workpieces with the WEN Benchtop Mortising Machine. Our powerful 5-amp motor provides you up to 1725 rotations per minute, making easy work out of even the toughest of woods. The spacious chuck accepts bits anywhere from 1/32 of an inch to 1/2 of an inch (1/4 to 1/2 inch for chisel bits), giving you the versatility needed to take on any project. With spindle travel of 4-1/4 inches and a max stock thickness of 4 inches, you'll be able to create sturdy and reliable mortises up to 3 inches in depth. The pneumatic spring head returns easily and smoothly while the spring-loaded fence allows for both fine-tune and large scale adjustments. The spacious table measures in at 13-1/2 by 6 inches with a work-piece hold down that accepts boards up to 3-1/2 inches thick. The adjustable feed handle rotates freely to prevent collision with your workpiece, springing back into place once you select your optimal start and stop points.

The onboard depth stop prevents you from drilling past your intended distance. The spring-loaded protective chip guard easily flips up and down depending on your current needs. This package also includes three chisel bits, measuring in at 1/4, 3/8 and 1/2 inch in size, along with an extra chuck extension adapter, a 3/4-inch chisel bushing, and a 10 by 8-inch cast iron base.

Product description

The super Heavy-Duty fence and hold down eliminates unwanted wood movement and sticking chisels an all too common complaint. The unique swiveling base allows easy off the bench operations and opens new possibilities for custom mortises. The extra height and depth capacity allows the use of much larger stock. The all-steel quick-adjust depth stop is easy to set and provides a positive stop. Features like a 22-Inch long solid steel quick-positioning handle, 8-tool holder, easy two-door chuck access, large base and twin hardened and ground columns insure perfect mortises every time

• Item may ship in more than one box and may arrive separately
• Unique swiveling base
• Gas spring return
• Double support columns
• Adjustable depth stop rod
• Micro adjustable fence

User questions & answers

Question:	can u use a 3/4 bit in machine
Answer:	the person who answered no is ignorant, these will easily work on a drill press as long as the chuck is large enough to chuck up a bit of the appropriate size. In fact it is the best way to use one of these types of bits.
Question:	I'm looking to make through mortises through 4" stock. Wondering if this machine can perform that task
Answer:	It is too large for Deltas bench to mortiser, both chuck size and mortiser bushing are too small. With a 1/2" drill press you solve the chuck size issue but I dont know what the mortising attachment bushing size is.
Question:	how is the side to side play? my schools shop has a jet and its terrible
Answer:	1/4
Question:	Does this item ship in two separate boxes? What is in each box
Answer:	This is not 5/8"; it is 3/4". Based on previous answer I brought this but its too big for my 5/8 " Delta machine!

Product features

Shop Fox W1671 Mortising Machine

We designed this Mortising Machine to address all the frustrations we found in other models on the market. We've added features like a 1/2 inch drill chuck, a quick-setting handle, an adjustable depth stop and a reliable rack and pinion elevation system. Combined with a 3/4 H.P. motor, a safety switch with removable key and a cord set, the Shop Fox Mortising Machine will give years of satisfying use.

Dual Access Doors

With doors on both sides of the headstock, the 1/2 inch JT #2 chuck is easily accessed for quick chisel changes. This mortising machine accepts chisels with shank sizes of 5/8 or 3/4 inch shanks.

Powerful Motor

The 3/4 HP totally enclosed fan-cooled motor features an aluminum-finned housing for long cool-running operation. The spindle turns at 3450 RPM, allowing you to power through a range of both hard & soft woods with ease. This high-speed direct drive operation allows for faster mortises so the cutter is in contact with the wood for shorter periods of time with less heat build-up. This prevents wood burning and keeps your bits and cutters sharper, longer.

Extra Long Handle

The extra-long steel handle easily adjusts to six different indexed positions to provide leverage throughout the full 9 inches of head travel. It is offset to put your wrist in a comfortable position for maximum power and control.

Swivel Base

If you need to mortise larger stock and require extra height and depth capacity, it’s no problem with this mortiser’s unique swiveling base feature. This set-up is done in a few easy steps and allows easy off the bench operations and opens new possibilities for custom mortises.

Heavy Duty Fence, Table and Hold Down

The heavy cast iron base features a 6 x 16 inch table for solid work support and stability. The heavy-duty fence and cast iron hold-down eliminate unwanted wood movement and the potential for 'stuck-chisels', a common issue when trying to mortise on non-dedicated machines, like drill presses.

Accessories

The W1671 includes a 1/2 inch chisel. Model D2845 4 pc. 1/4" - 1/2" Mortising Chisel Set is available as an optional accessory.

Product description

The PM701 Benchtop Mortiser features an in-line depth stop which allows the user to stop at preset depths without racking the mortiser bit to the base. Its heavy-duty reversible handle is so versatile that it can be changed from one side to the other quickly and easily and requires no tools to do so. The stock hold down features a specially designed double lock system. One locks from the side, the other locks from the top, to completely eliminate any slippage when removing the chisel from the work piece. This hold-down is also reversible to allow stock from 0 to 5" thick to be captured underneath it. The POWERMATIC® 701 Benchtop Mortiser has a quick-action cam lock that will quickly lock the fence into position with one 90° movement. This lock also features lock nuts, so once set they will not have to be continually adjusted. Set-up has never been easier or more precise. The POWERMATIC® 701 Benchtop Mortiser features an integrated bit and chisel spacer system. These two spacers are used to accurately and quickly account for the space needed between the bit and chisel during set-up. Large work surfaces in the table and fence allow for more stability and accurate cuts. The new mortiser also includes a large hinged chuck door with magnetic catch. This unique element allows the user to easily access the drill chuck with the standard 4" chuck key to lock the bit in place. In addition, its rack and pinion allow for simple and quick fence adjustments.

From the Manufacturer

The Powermatic Model 701 benchtop deluxe mortiser is powered by a 3/4-horsepower, 115-volt motor that runs at 1725 rpm and has a chuck capacity of 1/2-inch. The head-stroke capacity is 5-1/2-inches and the chisel center to fence is 4-3/8-inch with a chisel capacity up to 3/4-inch. There is an in line depth stop whichallows you to stop at pre-set depths without racking the drill bit to the base. The heavy-duty handle is reversible and can be changed from one side to the other and does not require any special tools, great for the left handed woodworkers out there. The stock hold down features a double lock system to eliminate any slippage when removing the chisel from the work-piece. The fence has a quick action cam lock to make positioning simple. Large hinged chuck door with magnetic catchallows you to easily access the drill chuck with the standard 4-inch chuck key. The fence is adjusted with by a rack and pinion system.

• TWO INTEGRATED BIT AND CHISEL SPACERS: For quick set up.
• IN-LINE DEPTH STOP: Allows stopping at pre-set depths without racking the bit to the base.
• HEAVY-DUTY REVERSIBLE HANDLE: Can be installed (without tools) to either side of the head.
• STOCK HOLD-DOWN WITH DOUBLE-LOCK SYSTEM: Eliminates work piece slippage.
• QUICK-ACTION CAM LOCK: Will quickly lock fence in position with one 90° movement.
• 3/4-horsepower bench mortiser with 1/2-inch chuck, in-line depth stop, and 5/8- and 3/4-inch bushing sizes
• Operates up to 1,725 rpm, 5-1/2-inch head stroke capacity, reversible handle for left/right-hand operation

User questions & answers

Question:	What is the maximum height of a board you can mortise without buying the riser
Answer:	The $300 is made in UK and the $100 is made in China.
Question:	What is the minimum size table (width and depth) this will fit on
Answer:	The standard package will accommodate a door up to 2 1/4" (57.15 mm). For thicker doors there is a housing kit PSDBB/HK/S that will accommodate a door up to 5 1/2" (139.7 mm). For cutting beams or other items you can use the extra long threaded clamp screws PSDBB/LCS which allows you to mount the jig up to 7 3/4" (200 mm).
Question:	what chisels does the machine come with
Answer:	Thank you for your question. The offset mortise adaptor, is an upgrade to the Jig1. The offset mortise adaptor uses the same vertical bar and clamp system and this flexibility allows you to cut hinge recesses and the mortise for the strike plate in door frames less than 95mm thick, which is about 3.74". Please let us know if you have any additional questions. -National Security Supply Customer Service
Question:	Does the head swivel so you can use it for oversized pieces
Answer:	It is made in England. Morticer is the way the English spell what we in America would spell Mortiser.

Product features

POWERMATIC PM701 Benchtop Mortiser

The POWERMATIC PM701 Benchtop Mortiser features an in-line depth stop which allows the user to stop at preset depths without racking the mortiser bit to the base. Its heavy-duty reversible handle is so versatile that it can be changed from one side to the other quickly and easily and requires no tools to do so. The stock hold down features a specially designed double lock system.

One locks from the side, the other locks from the top, to completely eliminate any slippage when removing the chisel from the work piece. This hold-down is also reversible to allow stock from 0 to 5" thick to be captured underneath it. The PM701 Benchtop Mortiser has a quick-action cam lock that will quickly lock the fence into position with one 90° movement. This lock also features lock nuts, so once set they will not have to be continually adjusted. Set-up has never been easier or more precise.