14 best drill press benchtops

Product description

Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

• Includes a 1/2-inch keyed chuck and onboard key storage
• Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
• Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
• Durable 1/3 HP induction motor develops ample torque and power
• 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
• Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.

User questions & answers

Question:	ease of putting together
Answer:	It's really easy to put together. Just took me round 5-10 minutes.
Question:	What is the maximum width of material you are drilling (from drill center to hitting the pole
Answer:	i think the varied answers come from questions getting sent to people who have purchased different sizes. I noticed some of the reviews are also for other models. This item, the WEN 4208 has an 8-inch swing. So, you can drill the center of an 8- inch diameter object, or about 4- inches from drill center to body. The WEN 4210 & the WEN 4212 have 10- inch swings. Anyone trying to drill the center of a 9- inch wheel would need one of these models. This 4208 is a Great drill for the money. i like that the head can be swung over the edge of a work bench, which allows for drilling into long stock. Like into the bottom center of a 36" post. The beveling work table is another great feature & one i did not have on the press this will replace. If you have the space, consider the WEN 4214 with 12-Inch swing. it is still small enough to be bench top, but you can drill the center of 12- inch/ bowls & table tops.
Question:	Can you rotate the drill press on this unit 90 degrees, so that it hangs off the edge of the workbench, to drill into the ends of longer pieces of stock
Answer:	Yes you can, just be careful when ever you do this.
Question:	does it drill round holes
Answer:	I only drill square holes with mine.

Product features

Powerful. Versatile. Compact.

Remember when power tools were actually powerful? WEN’s 8-inch 5-Speed Drill Press is compact enough to limit space on your work bench but powerful enough to drill through metal, wood, plastics, and more. Drill up to a 1/2-inch hole in heavy-duty cast iron. Its powerful induction motor features ball bearing construction for an extended life, providing smooth and balanced performance even at high speeds. The 1/2-inch JT33 chuck gives you versatility with a variety of bits while the worktable bevels up to 45° left and right. Constructed with a rigid frame and a cast iron head, table, and base, ensure accurate holes and convenient drilling operations every time. Remember when you could drill holes in any material with ease? Remember WEN.

Locking Depth Adjustment

Set the depth adjustment knobs to limit your spindle travel for accurate and repeatable drilling operations.

Beveling Worktable

Bevel the worktable 45° left and right for precisely angled holes.

Onboard Key Storage

Place your chuck key on the attached key storage to make sure it is alway there when you need it.

1/2-inch Keyed Chuck

The JT33 chuck accepts drill bits up to a 1/2-inch in size to meet the needs of a variety of projects.

Product description

If you want to set up a drilling station in a tiny room, or add a small, dedicated drill press to a crowded shop, this is the machine for you. Compact and light weight with an 8" swing and 5 spindle speeds this drill press will help you get the job done, whether you're a weekend hobbyist working out of your apartment or a full-fledged craftsperson running a production shop. Made in an ISO 9001 factory

User questions & answers

Question:	What is the Quill travel
Answer:	You mean how far down I can go? If so, 2"
Question:	Can I use a masonry bit to drill holes into bricks using this Drill Press
Answer:	Minimum rpm on the G0925 is 740 rpms. Boring up to 1/2” diameter in soft brick max rpm is 700. Masonry bits 1/2” and smaller cut more efficiently at approximately 500 to 700 rpm. Lower speeds equate to cleaner holes and extended bit life.
Question:	Country of origin
Answer:	This machine is manufactured in China.
Question:	what is the overall height ? looking for one to put on a flip table
Answer:	Fully assembled, I measured 23.5 Height * 15 depth * 9 width

• Motor: 1/2 HP, 110V, 5A
• Overall height: Bench model: 31-1/2"
• Overall height: Bench model: 31-1/2"
• Number of speeds: 5
• Drill chuck: 5/8"

User questions & answers

Question:	No work light
Answer:	The difference between e6 Soft and 2019 e6 would be 1) Construction: e6 Soft is 3-piece, whereas 2019 e6 is 2-piece 2) Compression: 2019 e6 is softer than the e6 Soft, which will reduce more spin off the tee The new e12 Soft would be the closest model to the e6 Soft, but if you want soft feeling off the tee, we recommend you to try the 2019 e6. Thank you,
Question:	Why is press so noisy, can it be adjusted
Answer:	yes, the new e12 Contact will be available on 2/26. We still sell the current e12 Soft and Speed until the new product is launched.
Question:	Quill travel distance
Answer:	Yes that is correct. Made in Covington, GA. Thank you for reaching out and we hope you enjoy our new e12 product!
Question:	does this have to be bolted to the floor or can it be used as a free standing unit
Answer:	The box of these balls state they are made in Japan

Product features

Shop Fox W1669 1/2 HP 34-inch Bench-Top Radial Drill Press

The Radial Drill Press is one of the most versatile and handy drill presses you can add to your shop. Between the tilt of the head and the tilt of the table, you can drill any angle necessary. You can also use it as a horizontal boring machine. Add to this an incredible swing which allows you to bore to the center of a workpiece that is 34-inches wide and you have one of the best values available in a drill press.

Horizontal Sliding Headstock

This drill press offers the ability to drill wide workpieces up to 34-inches diameter, you can slide the headstock in and out to increase the distance between the drill chuck and the column up to 17-inches.

Tilting Headstock

You can also tilt the headstock from 45-degrees clockwise to 90-degrees counterclockwise for drilling angled holes or for horizontal boring machine use.

Repeat Operations

Using the slide and tilt features, you can drill a line of straight or angled holes without the need to reposition your workpiece after drilling each hole.

Tilting Table

The W1669 features a precision ground cast iron table that features adjustable tilt from 90-degrees both left and right. The table can be adjusted for height and angle making this an extremely versatile machine capable of many applications.

Safety Switch

This drill press also features a safety paddle switch which provides a greater degree of safety over other types of 110 volts on/off switches due to its oversize paddle and removable lock-out key. No more fumbling around to locate the off button. Simply slap the paddle down to switch off power.

Product description

This easy-to-use benchtop drill press is very small, but powerful enough to use for all of your drilling projects. With a platform measuring only 6-3/4" x 6-3/4", it is space-saving as well as economical. Variable speeds up to 8,500 RPM. 1-year warranty.

• Ideal for all drilling projects, not just the small ones
• 1-year manufacturer warranty
• Variable speed up to 8,500 RPM
• Measures 6-3/4 inches by 6-3/4 inches; 13.00 pounds
• Easy-to-use tiny benchtop drill press is space-saving and economical

User questions & answers

Question:	I'm looking to buy a drill press so that I can mill out my polymer 80 AR receiver, would this be able to get the job done
Answer:	Sorry, I don't know what an 80 AR receiver is. I use my drill press to drill holes in seeds for lei and it works perfect.
Question:	Where do replacement drive belts come from? This isn't a standard type belt
Answer:	Replacement belt parts for the Euro Tool (DRL-300.00) Bench-Top Drill Press are provided by Euro Tool. Type this ASIN: B00A97XFA6 into the search bar of Amazon.com and hit search to be directed to the listing page where you can view and purchase this replacement part. Please keep in mind this is not a standard type belt drive and will be difficult to replace outside of purchasing a Euro Tool replacement product.
Question:	Can it drill into 80% forged T6 aerospace aluminum using good cobalt bits? Holes will not be larger than 1/4 inch in diameter
Answer:	I don't see why this drill press wouldn't work for your project. This drill press is designed for slower drilling. The type of drill bits have a lot to do with it also, but I would day that this drill press will work.
Question:	Will this hold a half millimeter drill bit
Answer:	Hey Jim sorry Im not good with metrics but it does hold a 9/32 drill bit.Also to my knowledge they do make large bits with this small diameter end.and I found a nifty conversion sight http://mdmetric.com/tech/cvtcht.htm 0.2813 inch to 7.14502mm I hope this helps Im also going to see if I am able to change the drill head to a biger size so I dont have to find special bits.

Product description

Shop Fox offers a broad assortment of drill presses to suit every need - from small hobby shops up to professional machine shops. Our unique oscillating models afford two-machine convenience in half the space and our radial drill presses offer unmatched versatility. For the best selection of features, performance and value, look no further than Shop Fox.

• Overall height: 23"
• Spindle travel: 1-5/8"
• Drill chuck: 1/64" - 1/2"
• Dust port size: 2"
• Swing: 8-1/2"

User questions & answers

Question:	Can it cut metal or steel if it can what thickness
Answer:	None that I know of. There were no drill bits in the one I received.
Question:	Can the center support column be replaced with a longer unit, don't see that as a oiption, any ideas
Answer:	Select 'Commercial Sales' as the shipper and this will be shipped out Today.
Question:	Can you drill a 1" hole through a 2x4 and 4x4 on low rpm with out stalling
Answer:	It is not variable speed. You need to set the speed depending what material you're working with. Setting the speed is very easy, and only takes a few seconds. Just need to move the belt, which is easily accessed on the top. I have never owned or operated a drill press with variable speed. Speed needs to be set.
Question:	What size is the base
Answer:	Metal

Product features

Shop Fox W1667 Bench-Top Drill Press, 8-1/2-inch

This bench-top oscillating drill press is a compact machine that can conveniently serve as either a drill press or an oscillating sander and is capable of a wide variety of drilling and sanding operations.

Some key features include a 1/2-horsepower motor along with a 1/2-inch drill chuck and a removable safety key to help prevent unwanted starts.

Oscillating Spindle

This drill press features a precision-ground sanding spindle that can be used with sanding drums between 1 and 2 inches in diameter and up to 4-1/4 inches long. The spindle oscillates, resulting in a better finish and longer-lasting abrasives.

Safety switch

The W1667 features a paddle switch to provide a greater degree of safety over other types of switches due to its oversize paddle and removable lock-out key. No more fumbling around to locate the off button. Simply slap the paddle down to switch off power.

Depth scale

The Shop Fox drill press comes fitted with a depth stop that allows drilling holes at a preset depth. Use the easy-to-read depth scale to locate your desired depth.

Tilting Table

A 7 inches x 7 inches square tilting table allows you to sand surfaces at different angles, while table inserts provide extra support for your work piece.

Dust Port

The machine is also equipped with a 2-1/4-inch dust port that can be connected to a dust collection system to help keep your workshop clean.

Spindle Sander Drum Kit (Sold Separately)

The optional D2677 Drum Sander Set includes three rubber sanding drums 4-1/4 inches in length to accommodate 1 inch, 1-1/2 inches and 2 inches diameter sanding sleeves. This kit also includes one 80 grit sleeve for each drum to get things started.

Product description

This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.

Features:

Infinite speed selection within the machine\'s six speed ranges(0-2800r/min).

Aluminum alloy base.

Gear drive without belt design, power strong.

Power-off switch for added safety.

Can be widely used model, wood boards, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling. This is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.

Specifications:

Plug: US (optional)



Spindle Speed: 0-2800r/min

Drill Clamping Diameter: 1-13mm / 0.04-0.51in

Input Power: 710W

Spindle Travel: 60mm / 2.36in

Voltage: 110-220V, 50-60Hz

Drill Capacity: Woods: Ï30mm

Iron: Ï8mm

Working Radius: 110mm / 4.33in

Material: aluminum alloy

Item Weight: 6000g / 12.22b

Package Weight: 6100g / 12.36lb

Package Size: 480 * 290 * 150mm / 18.90 * 11.42 * 5.91in

Note:

Please allow 10-30mm error due to manual measurement and make sure you do not mind before ordering.

The color of the actual items may slightly vary from the above images due to different computer screen, thanks for your understanding.

Package List:

1 * Bench Drill

1 * English Manual

• Can be widely used model, wood boards, plastic sheeting, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling.
• Is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.
• This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.
• Infinite speed selection within the machine\'s six speed ranges(0-2800r/min).
• Aluminum alloy base.

User questions & answers

Question:	How many Amps
Answer:	710 Watts at 220 Volts (710 / 220) = 3.22 Amps
Question:	The description says the voltage is 110-220v and 50-60hz.. but my unit's faceplate says 220v 50hz. Will damage happen at 110v 60hz
Answer:	No risk of damage. However it will only run in the very top "range" and then only at less that half speed. The motor is NOT designed to be run on US standard 110 Volt 60 Hz power.
Question:	Does this have a reverse function
Answer:	NO , The machine donot have a reverse function !
Question:	Does it have a half inch chuck
Answer:	Drill Clamping Diameter: 1-13mm / 0.04-0.51in Drill Capacity: Woods: Ï30mm Iron: Ï8mm Working Radius: 110mm / 4.33in

• 3 Variable speeds per minute: I:0-8000r/min, II: 0-11000r/min, III:0-16000r/min.
• Clamp Diameter:1-10 mm; Drilling Diameter: 0.6-6.5 mm / 0.02-0.2 6inch.
• Great speed,Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling. Can also be used for DIY furniture, work easily, drilling holes more accurately.
• High quality drilling, easy operation, good stability. With speed regulating switch, speed can be adjusted easily.
• Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency.（If you have any questions after purchase, please contact us to solve it for you.）

User questions & answers

Question:	This is a true 120v motor? not the 220v model i see on amazon that advertises it works also on 120v
Answer:	yes, my understanding is that there is an adapter available through Pioneer to make it wifi.
Question:	Where does this product ship from? Thank you
Answer:	Yes they can. I have B wired into a speaker select switch and I can select between my outside speakers or my speakers in the kitchen.
Question:	How straight and stable is the chuck? Is there much runout with a typical drill bit
Answer:	Hello Julie, the VSX-834 is a seven channel receiver, meaning it can support and operate up to 7 speakers at a time. If you wish to operate all nine speakers at the same time, you will need a separate amplifier connected to the ZONE B Line Out (this will mirror the one set of speakers connected to the SPEAKER B terminals). - MM
Question:	Does this turn both forward and in reverse
Answer:	Hello Magnumtripod, this can be the result of the settings or the source material. Please contact our technical support line to go over your settings to verify what may be causing your issue. - MM

Product features

EWANYO 340W 3-Speed Mini Drill Press Bench

• 3 Variable speeds per minute: I:0-8000r/min, II: 0-11000r/min, III:0-16000r/min.
• Clamp Diameter:1-10 mm; Drilling Diameter: 0.6-6.5 mm / 0.02-0.2 6inch.
• Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency.
• High quality drilling, easy operation, good stability. With speed regulating switch, speed can be adjusted easily.
• Great speed,Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling. Can also be used for DIY furniture, work easily, drilling holes more accurately.

Package Included:

1 x Electrical Machinery

1 x Drill Chuck

2 x Hex Key

2 x Accessory

Product description

Shop Fox offers a broad assortment of drill presses to suit every need—from small hobby shops to professional machine shops. Our unique oscillating models provide the convenience of two machines in half the space, and Our Radial drill presses offer unmatched versatility. For the best selection of features, performance, and value, Look no further than Shop Fox.

• Motor: 3/4 HP, 110-Volt, 1,725 RPM, Spindle Speeds 250-3050 RPM
• Drill chuck: 5/8-Inch
• Spindle travel: 3-1/4-Inch
• Swing: 13-1/4-Inch
• Includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums.

User questions & answers

Question:	Where can I get a manual for this drill press
Answer:	It depends on the model.
Question:	Trying to find a replacement belt for the oscillating sander portion (X1668061), anyone know where to find these online
Answer:	Yes, this is the upper dish rack for your model.
Question:	Is this a jt33 Taper Chuck, anyon eknow, i want to geta keyless for it
Answer:	Check the serial # of your dishwasher on the GE site, then type in the result here on Amazon to find the appropriate part.
Question:	Can I get this model drill press without damage
Answer:	No, this GE WD28X10369 Upper Dish Rack Assembly is not compatible. The correct GE Upper Dish Rack Assembly for your model is part# WD28X10410.

Product features

SHOP FOX W1668 3/4 HP Bench-Top Oscillating Drill Press

Just like its little brother, this 12-speed drill press doubles as an oscillating sander that can be used for efficient contour sanding. With more speeds, more power and more capacity this machine becomes an effective tool for heavier use. The table has a clearance hole for use while sanding. This clever design incorporates a dust collection port so your sanding jobs are less messy. With a 3/4-inch drilling capacity in steel you'll be able to tackle most any drilling job as well.

Tilting Table for Versatility of Applications

The W1668 offers the ability to tilt the table 90-degrees to both the left and right. You can adjust the table height and tilt to accommodate for workpiece height or achieve special drilling or sanding angles. You can also move the table out of the way and use the drill press base as a table for drilling or sanding.

Oscillating Feature for Sanding Operation

One of the great features of the W1668 13-1/4-inch Oscillating Drill Press is its sanding capability. The drill press can be converted from drilling operations to sanding operations in a matter of seconds with just a few tool-free steps. Oscillation reduces heat build up and leaves a smooth finish when sanding.

Compact Bench-top Design

This drill press is designed for bench top use freeing valuable floor space.

Product description

Specifications:

Base material: Aluminum Alloy

Drilling depth: Up to 60mm

Total height: 400mm

Bottom base size: 220*145mm

Drill boss diameter: 38mm / 43mm

Side clamping diameter drill: 35mm -38mm



Easy to use:

1. Tighten the two screws and fix the main shaft on the base.

2. Put the travel assistant control ring into the main spindle.

3. Finally, put the electric drill base inserts main spindle to strengthen fixing and completing instruction.



Note:

1. there is only one screw, so it can not be used to compare the strong operation.

2. there is Not cast iron for the base. To secure the base, use screws



Warm Notice: dear customers, this stand does not fit rechargeable lithium battery drill. Besides, please kindly check the dimensions of this drill stand before your purchase to confirm whether it fits your drill :),and kindly note there will be some mm difference among different stands, any defecitve items you receive, please never hesitate to contact us, we offer 30 days return policy, thank you! :):)::)

• Double mounting holes bench drill press stand with aluminium alloy base
• 2 electric drills can be installed on it simultaneously in different direction
• Max drilling depth: 60mm; Drill press stand height: 400mm
• A column bar installed in a sturdy base with slots
• This bench drill press stand is widely used for keeping your drill bit stable during use. Your drilling work is more accurate by using this stand than that by handheld operation.

• The material of the electric drill press bracket: aluminum alloy base + stainless steel cylindrical bar; drilling depth: maximum 60mm (2.4"), single hole installation.
• Application: Used for electric drills with a drill diameter of 38-43mm (1.7 inches or 1.5 inches), including black plastic rings for better fixation.
• Equipped with double chucks to solve the problem of lateral drilling, and is equipped with a flat-nose pliers to easily fix objects
• This drilling frame is ideal for keeping the drill bit stable during use and is more accurate than the handheld drill.
• Package includes: 1 set of drill press bracket (requires assembly). Excludes electric drill; includes a flat-nose pliers and a double chuck

Product description

We see a future built on great brands, great products and great people. In every facet of our business we leverage the strengths of our global infrastructure to maximize the benefits of all three.

From the Manufacturer

The J-2530 15" Bench Drill Press boasts a 3/4HP motor and tilting table. Simple yet powerful, the J-2530 has a cast iron head and large quill - allowing greater accuracy.

• Power source type: Corded-electric

User questions & answers

Question:	Are the belts standard V belts or Serpentine belts
Answer:	Hi Rick, Drill Head Clearance without Spring and Depth Stop - Max Travel: 8.23", Minimum Drill Bit Clearance: 0.72". For your reference, please view the Drill Head Clearance Specification Sheet -http://www.milescraft.com/wp-content/uploads/2017/05/1318-DRILL-HEAD-CLEARANCES-New-Head.pdf
Question:	Can this be switched to 220 volts
Answer:	The spindle has two ball bearings in it, for accuracy. The bushings are located on the left and right side of the guide head, which is where the bars slide through.
Question:	Can you lock the quille down in position
Answer:	I've found it cannot drill through 4x4 timber. I haven't measure the stroke, probably about 2.5 inches.
Question:	Can it reverse direction
Answer:	Slightly elliptical: 3 and 1/2" (between the rods) x 3 and 7/16" at 90 degrees.

Product description

Specification:

Base Material: Aluminum

Cranks and Column Material: Carbon Steel

Chuck Diameter: Max. 43mm / 1.7inch

Drilling Depth: Max. 60mm / 2.4inch

Total Height: 400mm /15.7inch

Shaft Diameter: 25mm / 1inch

Bottom: 150 x 150mm / 6 x 6inch

Package Include:

1 x Base

1 x Column bar

1 x Rocker

1 x Lower limit Fixed sleeve

1 x Adjustable plastic fixed sleeves

1 x Hex wrench 5mm

• The Drill Press is designed to convert your standard power drill or rotary tool into a drill press in a convenient and cheaper way.
• The depth gauge helps to change drill position with minimal risk of over-drilling into the stand.
• This universal bench clamp support tool is designed for use with power drills with collar diameter of 38mm or 43mm, can drill depth up to 60mm, comes with 2 holes for mounting.
• The holder fixing cover regulate the holder height as the working and electric drill height.
• Heavy-duty cast metal base with slots and mounting holes provide excellent stability.

• 【Material】Electric drill press stand constructed with aluminum ally base,solid column bar,durable to use.
• 【Available Drill】Designed for use with electric drills with collar diameter of 38-43mm (1.7"or 1.5"),with black plastic ring for better fix.
• 【Drill Depth】Drilling depth up to 60mm(2.4"), single hole for mounting.
• 【Features】This drill stand is ideal for holding your drill steady during use and allows for much more precise drilling than hand-held operation.
• 【You will Get】: The package includes 1 x Base, 1 x Column bar, 1 x Rocker, 1 x Lower limit Fixed sleeve, 2 x Adjustable plastic fixed sleeves, 1 x Hex wrench 5mm

User questions & answers

Question:	Can i use a battery powered drill with this
Answer:	Yes it should, mine did come with a remote. I do not have steering wheel controls so i velcroed mine to steering wheel , works great lol.
Question:	How is the carriage locked into position on the column
Answer:	I don't have Spotify premium and therefore was disappointed to find out it doesn't work without it. Does anyone know a way to play any music out of the smart phone through bluetooth on this receiver? Even if it has to be mp3's saved on this phone's SD storage card.
Question:	what kind of drill is compatible to this? please post a sample link. my drills dont fit
Answer:	If the HDMI (audio and video) are passing through the receiver, then you will not be able to watch unless the unit is on.
Question:	Hi. I purchased one of these drill stands but did not receive the sleeve that holds the drill in place. Where can I get one of these
Answer:	Zone 2 can be HDMI, speaker wire or an analog signal (RCA). There are no digital audio outputs.

Product features

Features

Drill Stand for Hand Drill

• This is a new adjustable drill stand, perfect for shop or home use.Designed for use with power drills with collar diameter of 43mm or 38mm（1.7'' or 1.48''）.Drilling depth up to 60mm(2.4''), has 2 holes for mounting.It has a solid column bar and sturdy base with slots for fitting a machine vice.

Features

• This Plunge Drill Stand is ideal for holding your drill steady during use and allows for much more accurate drilling than hand-held operation.The vise is durable and lightweight, and it is a very portable tool.

Drill Depth

• Drilling depth up to 60mm(2.4"), single hole for mounting.Pack of 1 set drill press stand per parcel.Need to assemble.Not including the electric drill

Application

• This is a new adjustable drill stand, perfect for shop or home use.It has a solid column bar and sturdy base with slots for fitting a machine vice, exercises stable during use.

• 【Full copper core motor】Stable noise reduction and transmission,full copper core motor.The quality of the fully automatic assembly line production motor is more guaranteed, and the CCC motor is more quality guaranteed
• 【5 Variable speed】Infinitely variable speed ranges from 580-2650 RPMS, you can adjust the speed according to your needs
• 【Elevating table】Tighten the screws to adjust the up and down position of the table.The worktable can be lifted up and down 360 °, and can be tilted + 45 °. It also has a slot surface, and can be equipped with flat pliers
• 【Fine grinding work floor】The precision grinding work floor guarantees the accuracy of workpiece processing and improves the workpiece yield
• 【Professional customer services】We want to ensure you are absolutely happy with your purchase!If any issues with our product please feel free to contact us and we will get this resolved as soon as possible.Our warehouses are located in CA and NJ, can be delivered in the short time

User questions & answers

Question:	Is there much wobble when drilling into proximity 2.5inch of sold aluminum or steel
Answer:	Yes, it has multiple locking mechanisms.

Product features

Product parameters:

Voltage: 110V / 60HZ

Drilling diameter: 13mm

5 Speed Settings: 580, 850, 1220, 1650, 2650 RPM

Rated power: 350W

Maximum height: 580mm/22.8inch

Full copper core motor

Stable noise reduction and transmission,full copper core motor.The quality of the fully automatic assembly line production motor is more guaranteed, and the CCC motor is more quality guaranteed

Lift adjustment handle

Tighten the screws to adjust the up and down position of the table