12 best bench drill presses

Product description

Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

• Includes a 1/2-inch keyed chuck and onboard key storage
• Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
• Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
• Durable 1/3 HP induction motor develops ample torque and power
• 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
• Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.

User questions & answers

Question:	ease of putting together
Answer:	It's really easy to put together. Just took me round 5-10 minutes.
Question:	What is the maximum width of material you are drilling (from drill center to hitting the pole
Answer:	i think the varied answers come from questions getting sent to people who have purchased different sizes. I noticed some of the reviews are also for other models. This item, the WEN 4208 has an 8-inch swing. So, you can drill the center of an 8- inch diameter object, or about 4- inches from drill center to body. The WEN 4210 & the WEN 4212 have 10- inch swings. Anyone trying to drill the center of a 9- inch wheel would need one of these models. This 4208 is a Great drill for the money. i like that the head can be swung over the edge of a work bench, which allows for drilling into long stock. Like into the bottom center of a 36" post. The beveling work table is another great feature & one i did not have on the press this will replace. If you have the space, consider the WEN 4214 with 12-Inch swing. it is still small enough to be bench top, but you can drill the center of 12- inch/ bowls & table tops.
Question:	Can you rotate the drill press on this unit 90 degrees, so that it hangs off the edge of the workbench, to drill into the ends of longer pieces of stock
Answer:	Yes you can, just be careful when ever you do this.
Question:	does it drill round holes
Answer:	I only drill square holes with mine.

Product features

Powerful. Versatile. Compact.

Remember when power tools were actually powerful? WEN’s 8-inch 5-Speed Drill Press is compact enough to limit space on your work bench but powerful enough to drill through metal, wood, plastics, and more. Drill up to a 1/2-inch hole in heavy-duty cast iron. Its powerful induction motor features ball bearing construction for an extended life, providing smooth and balanced performance even at high speeds. The 1/2-inch JT33 chuck gives you versatility with a variety of bits while the worktable bevels up to 45° left and right. Constructed with a rigid frame and a cast iron head, table, and base, ensure accurate holes and convenient drilling operations every time. Remember when you could drill holes in any material with ease? Remember WEN.

Locking Depth Adjustment

Set the depth adjustment knobs to limit your spindle travel for accurate and repeatable drilling operations.

Beveling Worktable

Bevel the worktable 45° left and right for precisely angled holes.

Onboard Key Storage

Place your chuck key on the attached key storage to make sure it is alway there when you need it.

1/2-inch Keyed Chuck

The JT33 chuck accepts drill bits up to a 1/2-inch in size to meet the needs of a variety of projects.

Product description

Remember when power tools were actually powerful? WEN’s 10-inch swing drill press with laser centering device is a powerhouse for your shop. Packed with features that you’ll find in larger, more industrial type drill presses, you can power through metal, wood and other materials with ease. Change from five speeds to target the exact RPM right for your project (600, 1100, 1700, 2400, 3100 RPM). Rigid frame construction of cast iron provides sturdiness and reliability. Its powerful induction motor features ball bearings for an extended life, all combining together with smooth and balanced performance at any speed. The 1/2” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. The X-pattern Class II 1mW laser locks-on to your drill points saving on guesswork and sparing expensive materials. A very versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachment, drum sanders, circle cutters, etc… Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes with laser precision? Remember WEN.

• Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
• Adjust between five speeds from 600 to 3100 RPM
• Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
• Durable 3.2-amp motor provides ample torque and power
• 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right

User questions & answers

Question:	Can I use this drill, with proper bit, on brick and granite
Answer:	Hi. I couldn't find 1 that fit perfectly so I just used a 'pack n play' and tucked it over the corners. It works fine . :-)
Question:	Can you turn the press around from the base so that the pole is turned 180 degrees in its base
Answer:	Dear Customer, This nap cot do not require a mat to be used on top. Thank you,
Question:	Does this drill press come with any bits
Answer:	Dear Customer, When assembled, the nap cot has 4.5" in height, it will fit under most beds. Thank you,
Question:	What is the difference between the 2019 and 2014 model
Answer:	Hi. I just saw this. No , there's no carrying back, It does come apart though that I think the 'parts' can be rolled into the 'mattress' part. That part is a mesh so it does need some kind of sheet. Have fun !

Product features

Drill with Laser Precision

Remember when power tools were actually powerful? WEN’s 10-inch 5-Speed Drill Press powers through metal, wood, plastics and more. Change from five speeds to target the exact RPM right for your project (600, 1100, 1700, 2400, 3100 RPM). Rigid frame construction of cast iron provides sturdiness and reliability while the powerful induction motor features ball bearings for an extended life, of smooth and balanced performance. The 1/2-inch chuck with JT33 spindle taper gives you versatility with a variety of bits. The worktable bevels 45° left and right for those tricky operations requiring precisely angled holes. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. Remember when you could drill holes with laser precision? Remember WEN.

Precision Laser

The laser light specifies the exact spot that the bit will travel through for maximum precision during drilling.

Depth Adjustment Gauge

Set the depth adjustment lever to limit your spindle travel for accurate and repeatable drilling operations.

Beveling Worktable

Bevel the worktable 45° left and right to ensure precise angled drilling.

Onboard Work Light

Illuminate your workpiece with the onboard work light for maximum visibility and precision.

Product description

This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.

Features:

Infinite speed selection within the machine\'s six speed ranges(0-2800r/min).

Aluminum alloy base.

Gear drive without belt design, power strong.

Power-off switch for added safety.

Can be widely used model, wood boards, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling. This is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.

Specifications:

Plug: US (optional)



Spindle Speed: 0-2800r/min

Drill Clamping Diameter: 1-13mm / 0.04-0.51in

Input Power: 710W

Spindle Travel: 60mm / 2.36in

Voltage: 110-220V, 50-60Hz

Drill Capacity: Woods: Ï30mm

Iron: Ï8mm

Working Radius: 110mm / 4.33in

Material: aluminum alloy

Item Weight: 6000g / 12.22b

Package Weight: 6100g / 12.36lb

Package Size: 480 * 290 * 150mm / 18.90 * 11.42 * 5.91in

Note:

Please allow 10-30mm error due to manual measurement and make sure you do not mind before ordering.

The color of the actual items may slightly vary from the above images due to different computer screen, thanks for your understanding.

Package List:

1 * Bench Drill

1 * English Manual

• Can be widely used model, wood boards, plastic sheeting, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling.
• Is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.
• This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.
• Infinite speed selection within the machine\'s six speed ranges(0-2800r/min).
• Aluminum alloy base.

User questions & answers

Question:	How many Amps
Answer:	710 Watts at 220 Volts (710 / 220) = 3.22 Amps
Question:	The description says the voltage is 110-220v and 50-60hz.. but my unit's faceplate says 220v 50hz. Will damage happen at 110v 60hz
Answer:	No risk of damage. However it will only run in the very top "range" and then only at less that half speed. The motor is NOT designed to be run on US standard 110 Volt 60 Hz power.
Question:	Does this have a reverse function
Answer:	NO , The machine donot have a reverse function !
Question:	Does it have a half inch chuck
Answer:	Drill Clamping Diameter: 1-13mm / 0.04-0.51in Drill Capacity: Woods: Ï30mm Iron: Ï8mm Working Radius: 110mm / 4.33in

Product description

Drill straight holes all the time! With the DrillMate you can drill straight or angled holes, drill on the edge of a board or even round stock. The drive shank attaches to your 3/8" Or 1/2" power drill while the keyed output chuck works with most 3/8" drill accessories. The all-metal construction DrillMate provides the precision of a drill press with the ease of a hand drill. Smooth operation and controlled drilling via spring and bearings prevent cutting tool from hitting work piece. Adjustable depth-stop makes repetitive drilling to any depth with near drill press precision. The metal base has a scale with easy to read angles, v-grooves for centering of round materials, and holes for permanent mounting for special fixture applications. Also includes auxiliary handle for controlled movement and rubber feet that give the base a nonslip option.

• Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
• Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key
• Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
• Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
• Adjustable depth stop and spring action control of the head

User questions & answers

Question:	What's the max depth of cut
Answer:	As answered you can get a copy of the manual from Grizzly or from Amazon.http://cdn0.grizzly.com/manuals/w1668_m.pdfandhttp://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000041994.pdfThey are not identical (40 pages on the Grizzly website, and 27 on the Amazon page).On difference is the depth stop. On the Grizzly site it is a jam nut on the depth stop rodon the left side, on the Amazon it is set on a collar lock knob on the spindle on the right side.My drill press has both depth stops, but the spindle does not have the depth label, and is notmentioned in the manual that came with the drill. When using the oscillating sander feature itcould be damaged if either stop is set.
Question:	Does it use Bearings or Bushings for the spindle
Answer:	I'd been wondering this myself... The Stock part on my W1668 is not a belt, but rather a polyurethane o-ring. The closest analogue I could find was here: http://www.amazon.com/dp/B0051Y2LSO/ref=biss_dp_t_asn If you want true OEM parts, you can call Woodstock international at (360) 734-3482 7AM-5PM PST/PDT M-F
Question:	Does anybody know how many inches the stroke is? Thank you
Answer:	Yes. Page 14 of the manual supplied with the drill press says, "The drill chuck is seated to the spindle with a JT-33 tapered surface and a screw."
Question:	What's the diameter of the opening in the base
Answer:	Also..it's a GREAT drill press!

Product features

Milescraft DrillMate

With the Milescraft DrillMate portable drill stand, you can drill straight holes, angled holes, on the edge of a board or even round stock. Everyone knows that the success of many DIY projects depends on drilling straight and accurate holes. Now you can add a whole new level of accuracy with this drill guide jig when drilling holes with your standard hand drill.

All Metal Head

Head is all metal construction that has a hex shank chucks to 3/8" and 1/2" drills. Easy glide bushing in the head, eliminate play and wobble, for precise drilling.

Adjustable Angle Settings

Angle readout for setting drilling angles to 45°, 60°, 75°, and 90°

V-groove

Metal base and three v-grooves for drilling on round stock.

TPE Feet

Non-slip TPE feet prevent slipping and marring on the work surface, that can be removed to mount with screws when needed.

Large Handle

Can be mounted in a fixed position on the base for maximum support no matter what drilling motion you are doing.

Depth Stop

Adjustable depth stop for repetitive drilling.

3/8" Keyed Chuck

Compatible with most 3/8” drill accessories and includes chuck key, which can be store in the TPE feet holes.

Product description

The IRWIN Drill Press Vise features a slotted base for easy installation and positioning. Crafted of forged iron for durability with textured 4" jaws that grip securely, this lightweight and portable drill press has a 4-1/2" jaw capacity and is perfect for light duty tasks.

From the Manufacturer

The IRWIN 226340 4-Inch Drill Press Vise provides stability and pressure for drilling applications. This vise is made of forged iron and has a clamping pressure of 1000-Pound.

• Slotted base for easy installation and positioning
• Textured jaws for secure gripping
• 4.5 Inch jaw capacity perfect for light duty tasks
• Lightweight and portable
• Crated of forged iron for long-lasting durability

User questions & answers

Question:	the slots on my drill press are 4.5 inches center to center. will this fit my drill press
Answer:	The slots on this vise is 6" center to center. You can angle the vise to line up with the holes on your drill press.
Question:	Is this tool made in USA, or china/mexico/other?? Thank you
Answer:	Seems to be China
Question:	What hardware is required to attach to the drill press
Answer:	4 bolts , nuts and lock washers. Don't remember the size but you want them to be snug in the holes that mount the vise to the base plate of the drill press.
Question:	Will this vise bolt to a Rockwell Rk7033 drill press
Answer:	I have a Delta bench top drill press, and I can bolt it down. Unfortunately I don't know much about the Rockwell drill press.

Product description

Shop Fox offers a broad assortment of drill presses to suit every need - from small hobby shops up to professional machine shops. Our unique oscillating models afford two-machine convenience in half the space and our radial drill presses offer unmatched versatility. For the best selection of features, performance and value, look no further than Shop Fox.

• Overall height: 23"
• Spindle travel: 1-5/8"
• Drill chuck: 1/64" - 1/2"
• Dust port size: 2"
• Swing: 8-1/2"

User questions & answers

Question:	Can it cut metal or steel if it can what thickness
Answer:	None that I know of. There were no drill bits in the one I received.
Question:	Can the center support column be replaced with a longer unit, don't see that as a oiption, any ideas
Answer:	Select 'Commercial Sales' as the shipper and this will be shipped out Today.
Question:	Can you drill a 1" hole through a 2x4 and 4x4 on low rpm with out stalling
Answer:	It is not variable speed. You need to set the speed depending what material you're working with. Setting the speed is very easy, and only takes a few seconds. Just need to move the belt, which is easily accessed on the top. I have never owned or operated a drill press with variable speed. Speed needs to be set.
Question:	What size is the base
Answer:	Metal

Product features

Shop Fox W1667 Bench-Top Drill Press, 8-1/2-inch

This bench-top oscillating drill press is a compact machine that can conveniently serve as either a drill press or an oscillating sander and is capable of a wide variety of drilling and sanding operations.

Some key features include a 1/2-horsepower motor along with a 1/2-inch drill chuck and a removable safety key to help prevent unwanted starts.

Oscillating Spindle

This drill press features a precision-ground sanding spindle that can be used with sanding drums between 1 and 2 inches in diameter and up to 4-1/4 inches long. The spindle oscillates, resulting in a better finish and longer-lasting abrasives.

Safety switch

The W1667 features a paddle switch to provide a greater degree of safety over other types of switches due to its oversize paddle and removable lock-out key. No more fumbling around to locate the off button. Simply slap the paddle down to switch off power.

Depth scale

The Shop Fox drill press comes fitted with a depth stop that allows drilling holes at a preset depth. Use the easy-to-read depth scale to locate your desired depth.

Tilting Table

A 7 inches x 7 inches square tilting table allows you to sand surfaces at different angles, while table inserts provide extra support for your work piece.

Dust Port

The machine is also equipped with a 2-1/4-inch dust port that can be connected to a dust collection system to help keep your workshop clean.

Spindle Sander Drum Kit (Sold Separately)

The optional D2677 Drum Sander Set includes three rubber sanding drums 4-1/4 inches in length to accommodate 1 inch, 1-1/2 inches and 2 inches diameter sanding sleeves. This kit also includes one 80 grit sleeve for each drum to get things started.

Product description

★【Fast Shipping & Satisfaction Guarantee】All the products are shipped from US warehouse(CA or NJ)! SHZICMY supports a non-controversial money back guarantee to ensure 100% satisfaction.



Product Description

Specifications:

Rated power: 480W

Rated current: 0.55A

Table size: 17 cm x 17cm

The spindle is about 110MM away from the drill bit center

Drilling diameter: 1-10mm

Max Spindle travle: 40mm

NO-load speed：

I: 0-5000r/min

II:0-11000r/min

Drill capacity:

Woods:φ25mm

Iron：φ7mm

Features:

-Suitable for drilling, expanding, and reaming operations on metals and other materials. It can be widely used in single-piece or mass-produced instrument industry, machinery manufacturing and repair parts.

-High-power 480W miniature portable bench drill Precision drilling machine motor copper

-The motor has increased power, which is to increase the life of the motor.

-480 watt motor construction adopts imported bearings, high temperature and full copper wire processing, shell adopts nylon plastic processing

Packaged included:

1 x Electric Bench Drill Press Stand

• ★-High quality, 480 watt motor construction adopts imported bearings, high temperature and full copper wire processing, shell adopts nylon plastic processing
• ★-Drilling diameter: 1-10mm, The spindle is about 110MM away from the drill bit center, Max Spindle travle: 40mm; NO-load speed：I: 0-5000r/min, II:0-11000r/min; Drill capacity: Woods:φ25mm, Iron：φ7mm
• ★-High-power, high-power 480W miniature portable bench drill Precision drilling machine motor copper
• ★-The motor has increased power, which is to increase the life of the motor.
• ★-Suitable for drilling, expanding, and reaming operations on metals and other materials. It can be widely used in single-piece or mass-produced instrument industry, machinery manufacturing and repair parts.

User questions & answers

Question:	Can this drill press be turned down to a chuck speed of between 10 to 50 RPM under load
Answer:	The accessories on the picture are available in our products.This is affordable, very popular in production and sales, and I recommend you to buy it. Spec: Mterial:Aluminum/PP Shaft: 400mm Clamping: 38-42mm Single stroke: 0-60mm Substrate: aluminum alloy Detailed description: Electric grinder jaw range (35-38mm) Electric drill jaw series (38-42mm) Sorghum: 20mm
Question:	What type of tasks/material/woods is this good for and which is it underpowered for
Answer:	I am not sure, but neither of my drills can work with this device. It will hold a flex shaft handpiece fairly well.
Question:	Can the drill be locked at a fixed depth
Answer:	standard v belts
Question:	Is this strong enough to drill stones
Answer:	YES - The Jet 2530 (354401) drill press can be re-wired to 230 volts, per the Jet operating instructions manual. Download the manual and review the wiring diagram on page 23. Obviously, one should not inquire here for stock market advice.

Product description

Remember when your workpiece clung tightly to your table top? The WEN 3-Inch Cast Iron Drill Press Vise clinches woods, metals, plastics and more, holding workpieces firmly in place for safe and accurate drilling. The heavy cast iron base along with the four onboard mounting slots provide stability to the vise during operation. The 3-inch jaws open up a total of 3-1/10 inches with a 1-inch throat depth to tightly grip boards and metals of a variety of shapes. The WEN 3-Inch Drill Press Vise is compatible with the majority of drill press tables on the market (including the WEN 4208, 4210, 4212, 4214, 4225, and 4227 drill presses). Never worry about your workpieces budging again with the WEN 3-Inch Cast Iron Drill Press Vise. Remember when you could drill holes safely and accurately? Remember WEN.

• Grip woods, metals, plastics and more
• Cast iron construction provides stability to drilling operations
• 3-inch jaws open up to 3-1/10 inches with a 1-inch throat depth
• Includes four onboard mounting slots to securely fasten the vise to a drill press table
• Universal design compatible with the majority of drill presses on the market (see images for base dimensions)

User questions & answers

Question:	does this fit a wen 8" drill press table
Answer:	I used 3/8” and works perfectly fine.
Question:	does anyone know the size of the bolts that mount the clamping pads to the vice
Answer:	The slots will take up to a 0.44" dia. bolt. On the same side, the slots range from 2.2" to 4.5" centers mounting range. Across the sides the mounting centers will be 4.3".
Question:	what is the distance between mounting holes
Answer:	If you mean will this vise fit on the platform of the Dremel Workstation #220-01, yes indeed. This is exactly why I purchased this vise to use under my workstation. You can get one or two bolts to line up with the slots on both parts to secure it. It is a very manageable size compared to a 4" drill press vise, and the price was outstanding.
Question:	Will this 3 " fit the dremel rotary work station
Answer:	I'm not sure. It's pretty tough and I have wrenched on it pretty good. That said its not a forged steel vice like my grand father had but it's not $200 either. For the $$ it's good.

Product features

WEN 423DPV 3-Inch Cast Iron Drill Press Vise

Remember when your workpiece clung tightly to your table top? The WEN 3-Inch Cast Iron Drill Press Vise clinches woods, metals, plastics and more, holding workpieces firmly in place for safe and accurate drilling. The heavy cast iron base along with the four onboard mounting slots provide stability to the vise during operation. The 3-inch jaws open up a total of 3-1/10 inches with a 1-inch throat depth to tightly grip boards and metals of a variety of shapes. The WEN 3-Inch Drill Press Vise is compatible with the majority of drill press tables on the market (including the WEN 4208, 4210, 4212, 4214, 4225, and 4227 drill presses). Never worry about your workpieces budging again with the WEN 3-Inch Cast Iron Drill Press Vise. Remember when you could drill holes safely and accurately? Remember WEN.

Product description

Specification:

Type: Iron Bottom Bracket

Min- Max Clamp : 38-43mm

Main Rod : 25*400mm

Size : 400*155*155mm

Specification:

Type: Iron Bottom Bracket

Min- Max Clamp : 38-43mm

Main Rod : 25*400mm

Size : 400*155*155mm

Trip: 60mm (50mm is most suitable for long time work)

Base: Cast Iron Base

Quantity: 1x Drill Bracket

Features:

90Degree rotable to drill slant hole. Copper plug readjustment to confirm the precision and durable.

Precise graduation, transparent pointer, spacing function.



Note:

The jaws specifications 38-43mm, comes with adapter sleeve can take about 38-43mm. Please amount under before making your drill size.

If the drill can be slightly smaller cut yourself some piece of cardboard or rubber mat, if your drill size larger than the jaws (more than 43mm), then do not buy it.

Package includes:

1 pc of drill stand (electric drill in the picture is NOT included)

Trip: 60mm (50mm is most suitable for long time work)

Base: Cast Iron Base

Quantity: 1x Drill Bracket

Features:

90Degree rotable to drill slant hole. Copper plug readjustment to confirm the precision and durable.

Precise graduation, transparent pointer, spacing function.

Note:

The jaws specifications 38-43mm, comes with adapter sleeve can take about 38-43mm. Please amount under before making your drill size.

If the drill can be slightly smaller cut yourself some piece of cardboard or rubber mat, if your drill size

larger than the jaws (more than 43mm), then do not buy it.

Package includes: 1 pc of drill stand (electric drill in the picture is NOT included)

• ✔Original Clamping range:43 mm,and it could be adjusted to be from 38 mm to 43 mm by 3 adapter sleeves that comes with this drill stand.
• This heavy duty drill stand, with 90 Degree Rotation, can act as a drill press, tool holder and flex shaft holder all in one for applications like drilling, sanding and buffing.. Drill accurate perpendicular and angled holes.
• by 3 adapter sleeves that comes with this drill stand. ✔Flex shaft tool stand - allows telescopic adjustment to any height between 16 and 29 In. Working stroke：60 mm, Down stroke：60 mm,
• Copper plug readjustment to confirm the precison and durable.Precise graduation:transparent pointer,spacing fuctuion
• ✔Sturdy metal base (cast iron)with 4 clamping points - to securely hold work piece.

User questions & answers

Question:	Are any parts on this tool made from Plastic
Answer:	The black part pops right out, but the yellow part is not 2.5", it's a permanent part of the press, so I think altering it would be difficult but not impossible.
Question:	Will this work with rotory tools like a Dremel
Answer:	it is the whorst tool I have purshased, so weak, just for soft wood
Question:	can the drilling angle be adjusted? It looks like it can be in the photos, but not mentioned in the description
Answer:	I bought the Milescraft 1318 drillmate drill guide with chuck
Question:	How accurate is this thing? Is there any play when drilling
Answer:	Not really, I will suggest you get a real drill press

Product description

Bench Electric Drill Stand/Press Power Tool Clamp Base Frame Holder Bracket NEW

☆ DENESTUS Tool Upgraded Drill Holder Stand Drilling Metal Base Bench Drill Press Stand

-Strong and Durable

-Adjust Different Bracket Height

-Bracket height fixing sleeve (designed with bracket height fixing sleeve, which can adjust different bracket height according to working height and drill length)

(Specific deviations, and the concentricity of the used electric drill, as well as personal operation technology, have a great relationship.)

 

Main working parameters:

• Mterial:Aluminum/PP
• Shaft: 400mm
• Clamping: 38-42mm
• Single stroke: 0-60mm
• Substrate: aluminum alloy
• Detailed description:
• Electric grinder jaw range (35-38mm)
• Electric drill jaw series (38-42mm)
• Sorghum: 20mm

 

Package Included:

1 * double hole drill stand

 

DENESTUS

★ We provide ‘100% SATISFIED SERVICE’

Your satisfaction is our ultimate goal.Normally take about 4-9 days to delivery

If you are not satisfied with our services and products, please contact us and we will try our best to solve it for you

★ We provide ‘100% tested before delivery’

We will test the product before it is delivered to ensure its reliability.

★ We provide ‘100% satisfied after-sales service’

If there are any transportation or other problems, we will provide 100% return policy.

a.If you receive a defective item, you may return it or ask for a discount.

b.What you returned must be intact and in its original packaging as it.

★ Please feel free to contact us if you have any questions.

• ■ DENESTUS Upgraded Adjustable Aluminum Drill Stand that is perfect for shops or families.The electric drill is equipped with a rubber sleeve for a firmer clamping and double holes.
• ■ Pefect Use : Adjust Different Bracket Height and Double holes are more suitable for your needs than single holes. The plug-in rig is ideal for keeping the drill bit stable during use and more precise than handheld operation.
• ■ Performance : The electric drill has high concentricity and small vibration, which can reduce the deviation. Drilling depths up to 60 mm, with solid struts and a sturdy base with slots for machine vise.
• ■ Design : The bottom of the Aluminum Alloy Base (with desktop fixing screw holes, the operation is more convenient and safer, the bottom surface is designed with an expansion slot, which can be installed with a vise or a mold).
• ■ DENESTUS Shipping Fast Stock By USA. We promise provide 100% satisfied after-sales service.Contact us for any problem, we will reply to help you solve your confusion.

User questions & answers

Question:	Does it come with the clamp
Answer:	yes, you adjust where you start from by turning a nut below the depth stop nuts.
Question:	what does double hole mean
Answer:	This drill press is not designed for reverse.

Product description

Remember when you could make fine-tune adjustments with the simple turn of a wheel? the WEN 4.25-Inch tilting vise provides 90 degrees of stable and reliable clamping action. Great for Incremental drilling and precision work. With a locking cradle and positive work stops every 15 degrees (0, 15, 30, 45, 60, 75, and 90 degrees), this vise is the perfect companion for your Benchtop, your drill Press, your work Table, and more. Made from heavy duty powder-coated cast iron, the WEN tilting vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 4.25-By-1.75-Inch jaws open up to 4.25 inches wide. The fixed jaw features a v-shaped Groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With six 1/2-inch mounting brackets positioned around the outside edge of the vise's base, the WEN angled vise is compatible with the majority of drill Press tables on the market, including the WEN 4210 and 4212 10-inch drill presses, the WEN 4214 12-inch drill Press, the WEN 4225 15-inch drill Press, and the WEN 4227 17-inch drill Press. And because it’s a WEN product, your cross vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• 4.25 by 1.75 inch jaws open up to 4.25 inches wide
• Constructed of industrial-strength powder-coated cast iron
• Features 7 positive tilting stops; one every 15 degrees from 0 to 90
• Five 1/2-inch mounting brackets allow for compatibility with the majority of drill press tables on the market
• Compatible with the WEN 10-Inch, 12-inch, 15-Inch, and 17-Inch drill presses

User questions & answers

Question:	Does anyone know if this will fit on the fordom drill press? That uses the flex shaft as a motor
Answer:	For milling small parts you should be ok.
Question:	is compatible whit Wen 4208 8 in
Answer:	no pads on the jaws
Question:	Do you think this is rigid enough for a milling machine
Answer:	No much I’m afraid. You can check at Technatools and Pen State Industries for a Spindle adapter that goes from the chuck to a 18mm threaded spindle. If you are in the US it may be harder to find. Both technatoole and PSI are sold here on Amazon.
Question:	Will the face pads come off
Answer:	If it is 1” 8 TPI it will fit. Please double check the specs at Harbor Freight. I’m not sure if the small lathe is 1” 8 TPI.

• 【Material】Electric drill press stand constructed with aluminum ally base,solid column bar,durable to use.
• 【Available Drill】Designed for use with electric drills with collar diameter of 38-43mm (1.7"or 1.5"),with black plastic ring for better fix.
• 【Drill Depth】Drilling depth up to 60mm(2.4"), single hole for mounting.
• 【Features】This drill stand is ideal for holding your drill steady during use and allows for much more precise drilling than hand-held operation.
• 【You will Get】: The package includes 1 x Base, 1 x Column bar, 1 x Rocker, 1 x Lower limit Fixed sleeve, 2 x Adjustable plastic fixed sleeves, 1 x Hex wrench 5mm

User questions & answers

Question:	Can i use a battery powered drill with this
Answer:	Yes it should, mine did come with a remote. I do not have steering wheel controls so i velcroed mine to steering wheel , works great lol.
Question:	How is the carriage locked into position on the column
Answer:	I don't have Spotify premium and therefore was disappointed to find out it doesn't work without it. Does anyone know a way to play any music out of the smart phone through bluetooth on this receiver? Even if it has to be mp3's saved on this phone's SD storage card.
Question:	what kind of drill is compatible to this? please post a sample link. my drills dont fit
Answer:	If the HDMI (audio and video) are passing through the receiver, then you will not be able to watch unless the unit is on.
Question:	Hi. I purchased one of these drill stands but did not receive the sleeve that holds the drill in place. Where can I get one of these
Answer:	Zone 2 can be HDMI, speaker wire or an analog signal (RCA). There are no digital audio outputs.

Product features

Features

Drill Stand for Hand Drill

• This is a new adjustable drill stand, perfect for shop or home use.Designed for use with power drills with collar diameter of 43mm or 38mm（1.7'' or 1.48''）.Drilling depth up to 60mm(2.4''), has 2 holes for mounting.It has a solid column bar and sturdy base with slots for fitting a machine vice.

Features

• This Plunge Drill Stand is ideal for holding your drill steady during use and allows for much more accurate drilling than hand-held operation.The vise is durable and lightweight, and it is a very portable tool.

Drill Depth

• Drilling depth up to 60mm(2.4"), single hole for mounting.Pack of 1 set drill press stand per parcel.Need to assemble.Not including the electric drill

Application

• This is a new adjustable drill stand, perfect for shop or home use.It has a solid column bar and sturdy base with slots for fitting a machine vice, exercises stable during use.