12 best cordless glue guns

• 2 Min Fast Preheating - This glue gun takes only 2 minutes to warm up. It exceeds 90% of conventional glue gun. Because it uses a more advanced PTC heating system, it can be preheated faster, improving its dispensing efficiency.
• Automatic Power Off Protection - The smart linkage switch, which will automatically cut off the power after 20 minutes of inactivity, protects the user and saves energy at the same time. In addition, the glue gun has a battery and heat indicator light, you can always know the energy/working status of the gun. The surface is made of flame retardant material to protect your hands from burns.
• Long-Lasting Battery And Fast Charging - This hot glue gun is equipped with a 2600mAh premium lithium ion battery. Combined with the MCH system and smart power off system, it is capable of working for 100 minutes. It also comes with a quick charger that will fully charge the battery in just 2 hours.
• Fast Discharging Of Glue - Super fast dispensing speed.The WORKPRO glue gun dispenses 0.18oz/5g per minute compared to 0.07oz/2g for regular glue gun. In addition, the kit comes with an additional 20 premium mini hot melt glue sticks.
• Pink Ribbon: WORKPRO Tools is donating $0.2 from this purchase to the NATIONAL BREAST CANCER FOUNDATION, INC.. NBCF is Helping Women Now by providing early detection, education and support services to those affected by breast cancer.

User questions & answers

Question:	Glue gun is charged and hot ... no glue comes out. What am I missing
Answer:	In your papers that came with the glue gun there is contact information on who to contact if you're passed the return date by Amazon
Question:	does this come with charging cable
Answer:	Dear Thanks for your purchase and question. Could you send a product video to us by Amazon message? If your glue gun was defective, we will resend a new replacemnt to you. Best regards WORKPRO Customer Service Team
Question:	May I have a replacement for this item? ...... used a couple of times and now does not work, heats up but dies after 5 or so minutes
Answer:	Yes the plastic base is removable. You just pull the base away from the gun. It also comes with a metal traditional wire stand. Good luck
Question:	Per the operating instructions the charging light indicator should turn on while charging. I am not experiencing this. Defective battery
Answer:	Hi. If you are asking about the diameter of the glue stick, the diameter is 7/16 inch. And I believe 7/16 inch is equivalent/or another way of saying .43 inch. Thank you and sorry for the delay. I didn't understand your question until you posted your second question.

Product features

Question & Answer:

1. Q: How to start the glue guncharge?

A: Press the on/off button and hold it for 2~3 seconds to turn on the machine

2. Q: How long does it take to charge after using this product?

A: After fully charged, It could be used intermittently for 100 minutes or continuously for 30 minutes if you keep pressing the trigger.If the lights turn red and dim, the glue gun needs to be recharged. Note: You should fully charge the hot glue gun in time if you find that it is no electricity during normal use. When you don't use the glue gun for a long time, remember to charge it every 15 days (just like the mobile phone battery).

3. Q: Can I use the glue gun while charging?

A: No, for safety, it is not supported to be used while charging.This is lithium ion cordless hot glue gun. Please use it after unplugging the cable line.

4. Q: How long does it take to heat? Can I use the glue gun immediately after starting it?

A: It takes about 2 minutes to heat the glue sticks.In order to avoid damage to the trigger by hard pull, be sure to wait 2 minutes for melting the glue sticks after starting the machine before pressing the trigger

Drip-free Nozzle

• Dispensing volume of 0.18 oz per minute

ON/OFF Switch

• Added automatic power-off system
• Press the on/off button and hold it for 2~3 seconds to turn on the machine

LED Indicator

• Reminding energy/working status of the glue gun.

Bracket

• ABS frame for solid support

Product description

Corded or Cordless operation. High Temperature. Ergonomic design. Has a lay down feature and contains a safety fuse that will shut the gun down in case of malfunction or overheating. On/Off switch and light. Lasts up to 3 minutes off the charging base. Uses standard 0.43 inch diameter glue sticks.

From the Manufacturer

High temperature cordless glue gun is ideal for craft, floral, and do-it-yourself projects. Use high temperature for better bonding to metal, wood, ceramics, leather, and other porous and non-porous materials. Operates at 380 F. Features: On/Off switch, 60-Watt, insulated nozzle and includes stand. Use with or without cord for various projects. Works with either 4-Inch or 10-Inch long glue sticks with standard 7/16-Inch dia

• High temperature cordless glue gun
• For most porous and non-porous surfaces
• Simple to use on/off switch
• Insulated nozzle, works with 4-inch or 10-inch glue sticks
• Operates at 380 degrees Fahrenheit, 60-watts

User questions & answers

Question:	Is the glue flow controllable? Most guns shoot globs and never “just a drop
Answer:	You probably can't take the razor, but you can definitely take the body of it. I don't think you're allowed any razors in your carry on.
Question:	What is the voltage
Answer:	I was getting tired of the shave gel lotion block around the blade always melting when I’d clean it. I stopped buying this particular brand for a while knowing that I was just flushing money down the drain. Then I decided to try something different: I got my file from my fingernail clippers and a q-tip...then I ran it under HOT WATER for 10 seconds, used the blade from my fingernail clippers to clean in between the razor blades, ran it under HOT WATER another 10 seconds, then used a q-tip to make sure it was clean! That’s been working out for me for about 18+ years now, or whenever they came out with this particular razor! Haven’t had issues or problems since! Hope this helps someone!
Question:	does this take full size or do u have to use mini glue sticks
Answer:	2" If you want 2 1/2 just order the product and send an email and we will be happy to send you 2 1/2
Question:	How do you charge the gun? Do you need to turn it on for it to charge? In that case, it only stays hot for a few minutes and isn't truly cordless
Answer:	It is sharpened, but not to the point I would call it shave ready. I had to spend some time honing it before it was comfortable on my face.
Question:	when installed will the head stay higher than the body of the sprinkler when not in use, don't want lawn guy to cut it off
Answer:	I think 400/800 need to double check
Question:	Will these work with regular sprinkler spikes? I need to rise mine a few inches to get over the grass as it gets taller. Orbit Spikes
Answer:	2” thin wall tubing
Question:	Do I use this riser extension or the regular cut off riser if I need to make my sprinkler slightly higher than it is right now
Answer:	Thin wall 2” inch tubing
Question:	How do I know what diameter I need
Answer:	Of course. Stainless tailpipe is much harder than copper
Question:	I don't understand how this works male to male - My Rainbird 5000 has a female side and I can screw one side of this riser, but the flex pipe is male
Answer:	It doesn't say on the tool or the package. My guess is China. However, it is very heavy and strong. Yet, it would not cut through the heavy exhaust pipe I needed to cut. Instead I used a reciprocating saw from Harbor Freight I bought for $20.00 and a metal cutting blade. It worked wonders. Like going through butter.

Product features

Surebonder Glue Sticks

FPC has been family-owned and operated since 1968. We are the proud, USA based, manufacturer of Surebonder adhesive products and tools. Whatever the project, Surebonder has the tool to get it done. We offer a wide variety of top quality hot melt glue formulas to ensure your project gets done, and gets done right.

Surebonder Clear Stik

Surebonder's go-to glue stick. A clear, general purpose, hot melt adhesive great for many craft, DIY and product assembly projects. Materials: wood, most plastics, most metals, fabric, paper, ribbons.

Surebonder Tough Stik

Need something stronger? Surebonder's Tough Stik is a clear, acrylic, hot melt adhesive great for those difficult surfaces. Materials: concrete, vinyl, metal, plastics, rubber, tile, stone, ceramic, leather, melamine, coated papers, foil, nylon, fabric and glass.

The Right Formula for Any Project

Surebonder also has formulas that include:

A Foam stick, perfect for bonding delicate materials such as foam, lace, lightweight fabrics and more.

A Cool Shot stick that operates at a lower temperature for safer use - great for classrooms.

Glue Rolls for the crafter who doesn't like to run out of glue.

Glitter glue, color glue, glues for wood, jewelry, glow in the dark, you name it, Surebonder makes it.

Cordless Glue Guns

Surebonder's Pro2-60 cordless glue gun eliminates restrictions and allows for taking the glue gun wherever it's needed. No cords and plugs to mess with; simply total freedom. Already working with Ryobi 18V batteries, the Pro2-60 will soon be compatible with Dewalt, Milwaukee and Makita batteries.

Staple Guns

Patented Trigger Design gives you ultimate power with minimal effort. In Trigger mode, simply squeeze the staple gun handle, position on the workpiece and pull the trigger to set the staple. Trigger mode setting gives you flush stapling with one hand! Ideal for hard-to-reach areas and accuracy. Easy drop in staple loading, adjustable depth drive, and convenient staple viewing for reloading staples.

Pneumatic Tools

Surebonder's line of pneumatic tools covers projects such as Insulation, Roofing Felt, House Wrap, Upholstery, Small Furniture, Screen Door Repair, and have features like a safety mechanism that prevents accidental firing, a quick release magazine for easy loading, adjustable air exhaust, a staple viewer and a high impact carrying case.

Rivet Tools

One of Surebonder's top rivet tools, the 8550 is a professional rivet tool designed for heavy duty steel construction work. Cast aluminum for light weight. Replacement parts available. Nosepieces included with rivet tool: 3/32", 1/8", 5/32" & 3/16".

• ❤【USB Charging & Long Battery Time】: TOPELEK hot melt glue gun with an USB charging port can be recharged with any USB devices of 5V/2A such as laptop, power bank, adapter, etc. 2200mAh battery supports glue gun to continually work for 80-100 minutes after fully charged.Note：We do not recommend using TOPELEK glue gun while charging or in low battery. Otherwise the glue may not be melted or not sticky.
• ❤【Mini Size and Portable Design】: The glue gun designed in mini size is suitable for both adults and kids to use. No need to plug in the socket, lightweight and cordless glue gun can be easily carried to anywhere as you like
• ❤【Safe and Easy to Use】: Secure ON/OFF power switch and LED working indicator enhance the safety while using. Ergonomic handle and flexible stand offer easy and comfortable operation, relieving fatigue of your hands even if work for a long time. Note: Please turn the switch to the “OFF” while charging (the indicator light turns red).
• ❤【Multi-purpose Glue Gun】: This mini glue gun kit is perfectly used in home, school and office for DIY crafts, artistic creation or repair, appropriately work on various of materials such as paper, glass, wood, fabric, metal, plastic, ceramic, etc.
• ❤【Bonus and Service Policy】: Come with 10pcs of glue sticks (140mm long). We will provide quickly response & 18-month after-sale service for you, please contact us when you meet problems, we will do our best to help you

User questions & answers

Question:	How long does it take to fully heat the glue once you turn it on
Answer:	Will not work.
Question:	This is suppose to be cordless.. Why are the reviews only for the one that isnt cordless thats on a whole dif listing
Answer:	They will not.
Question:	Can this glue gun use 0.43 diameter sticks
Answer:	Yes, their male twist mate connectors fit the female twist mate sockets on my Lincoln invertec 350 factory model. But you’ll have to limit your amperage output as these leads are only rated for 200 amps. They are well made.
Question:	Can I plug this into the adapter that I use for my apple iPad to charge it
Answer:	It should be compatible with any stick welder. However, I wouldn't recommend it. Mine broke within the first 30 minutes of using it

Product features

Ergonomic Handle and Trigger

Relieve fatigue of your hands even if use the glue gun for a long time

Leak-proof Nozzle

No glue leaking, silicone protective cover on the nozzle protect you from being scalded.

10Pcs High Quality Glue Stick

Glue stick with strong adhesiveness works with paper, wood, ceramic, metal, etc.

• ▶ Stand-up Base & Cordless: Comparing with other glue guns, this one built-in unique stand-up base and cordless design to keep your hot glue gun upright and ready for action. It's an ideal choice for all hot melt glue gun users, no more taking your eyes off work and will help to make your work easier
• ▶ Fast Preheating: The hot glue gun featuring 2-3 minutes warm up time is more efficient than traditional heat up system, which will save more waiting time and make it a perfect tool for arts & crafts, DIY projects, office use, home repairing and decorations
• ▶ Full Size Glue Sticks: With strong adhesiveness, the amount of glue discharged by our glue gun in a minute is 0.35oz, compared with 0.07oz for other conventional glue guns. It comes with 20pcs environmental-friendly glue sticks (full size 0.44 x 4 inches) will last a long time
• ▶ Safe & Anti-hot: The protective cover and insulated nozzle will help to make the hot temp glue gun extremely user-friendly. The safe trigger provides a well control of the glue flow and will help to save more glue sticks, and the drip-free nozzle also can effectively avoid the situation of spills
• ▶ How to Use: Please charge the 2.2Ah lithium-ion battery before using (the length of charger: 40"). Press and hold 3 seconds to turn on, then wait a short time for preheating. Attention that do not pull out the melting glue stick from the glue gun after work finished, keep it inside for next use

User questions & answers

Question:	How long does the battery last before it needs charging
Answer:	Package doesn't specify that is fabric safe so I wouldn't count on it being washable
Question:	Where is it made
Answer:	Hello! Our long lasting ink are non-toxic water-based ink which makes it very safe for kids to use! It is also odorless!
Question:	Does this glue gun have low temp and high temp settings
Answer:	I'm using it on standard copy paper and it doesn't bleed
Question:	The led light is green right out of the box as if it is fully charged. nothing else happens when i press the on/off switch. what' the issue
Answer:	Hello! Yes! These pens are very beginner friendly for all ages especially for people starting out. There are many different pen tips for you to practice with!

Product features

Protective cover & Insulated nozzle

Safe trigger & Anti-slip grip

Spill proof design

Product description

Specification

Product Name: Mini Hot Glue Gun

Model: NL-220

Color: Yellow

Material: ABS and Copper Nozzle

Power:8-12W

Working Voltage: DC3.7V

Size: 14.5x 15cm (5.7 x 5.9in)

Weight: 145g (5.1oz)

Cable Length: 1.1m (3.6ft)

Preheating Time: 3-5 minutes

Nozzle Internal Diameter: 1.8mm-2.0mm

Applicable Glue Stick Diameter : 7mm

Glue Flow: 3-5g/min



Package List

1 x Hot Melt Glue Gun

30 x Premium Glue Sticks (7mm x 150mm)

1 x User Manual



Application

The toy model.

Artificial flowers, Christmas tree.

Decorations, the metals product.

The wood product, card paper etc.

Bonded glass, daily basic repairs.

• ★【USB Rechargeable】: Equipped with 2600mAh rechargeable battery. The glue gun requires 180min to fully charge, which supports 60-90min continually working time after fully charged. Convenient and safe to use, also easy to carry. (Note: A Micro USB Cable is Included in the package.)
• ★【Fast Preheating Time】: SEEKONE cordless glue gun featured with high-tech ceramic PTC thermal heating system to ensure 3-5 min fast preheating time. Its smart temperature control design enables it to remain constant temperature.
• ★【Ergonomic Design】: The trigger can well control the glue flow to help you save glue sticks and make glue flow out smoothly. With copper and insulated nozzle, the glue gun will not be deformed even after long-term use under high temperature. A plastic stand holder makes your glue gun stay stable and upright in the process of using, thus to prevent the melt back to damage the gun.
• ★【30Pcs Premium Glue Sticks】: SEEKONE cordless hot glue gun kit package includes extra 30 environmentally-friendly and odor-free glue sticks ( 7x150mm) with stronger viscosity. The glue outflow speed is 3-5g/min. If you need more to make craft projects, it’s extremely enough for you to replace.
• ★【Wide Application】: This hot glue gun is an ideal tool for various DIY, such as crafts & arts, home repair, making decoration. It can work well with plastic, glass, paper, cotton, fabric and other materials. It bonds immediately and cools down super quickly, great for personal use of kids, children.

Product features

Seekone Cordless Hot Glue Gun

Specification

• Material: ABS and Copper Nozzle
• Power:8-12W
• Working Voltage: DC3.7V
• Weight: 145g (5.1oz)
• Cable Length: 1.1m (3.6ft)
• Preheating Time: 3-5 minutes
• Glue Flow: 3-5g/min
• Nozzle Internal Diameter: 1.8mm-2.0mm

Package List

• 1 x Hot Melt Glue Gun
• 30 x Premium Glue Sticks (7mm x 150mm)
• 1 x User Manual

Come with 30pcs Hot melt glue stick ( 7x150mm)

1. Do not immerse the glue gun in water
2. Avoid using the glue gun in a humid environment. Humidity will affect the insulation performance and may cause electric shock.
3. When using the glue gun, please wear safety glasses.
4. Glue sticks are melted by heat, so avoid high temperature when storing glue sticks.
5. Keep out of children's reach, please store this product out of children's reach.
6. Please switch off the glue gun if it has not been used for 15 minutes. It may emit a little smoke for the first usage, which is a normal, and it will cease after a few moments. If the glue gun emits excessive smoke, please unplug it immediately and place it in a well-ventilated area to cool

Helpful Tips

• Do not directly touch the nozzle when using it.
• Don’t try to use the glue gun with the nozzle pointing up wards.
• After the glue is melted, it is forbidden to pull out the glue stick
• It is forbidden to disassemble and install the electric heating parts.

Stable and Not Easy to Fall

• A plastic stand holder and Flat base makes your glue gun stay stable and upright in the process of using, thus to prevent the melt back to damage the gun.
• With copper and insulated nozzle, the glue gun will not be deformed even after long-term use under high temperature.

Smooth Round Glue Stick Socket

• Applicable Glue Stick Diameter : 7mm
• Size: 14.5x 15cm (5.7 x 5.9in)
• Smooth round socket keeps glue stick stay fixed. Don’t pull out of the remanent glue sticks from hot glue gun after each use to prevent the glue from sticking to the rubber tube and blocking the glue gun.

Cordless Glue Gun

Comfortable Handle

Package List

• Cordless Glue Gun: Lightweight and cordless glue gun can be easily carry , you can get rid of the shackles of the wires and use it anywhere as you like, the mini glue gun is suitable for both adults and kids to use
• USB Charging & Power: POPULO hot melt glue gun with a USB charging stand and a charging cord, 1500mAh rechargeable battery supports glue gun to continually work for 60-80 minutes after fully charged.
• Safe and Easy to Use: Secure power switch and LED working indicator enhance the safety while using, long press the switch to turn on and click to close, the ergonomic handle is very easy to use
• Glue Gun Holder: The hot glue gun holder can hold the glue gun very well, and has a USB charging interface, and also has a drip-proof plate on the head
• Multi-purpose Glue Gun: The glue gun kit comes with 26pcs glue sticks that are perfectly used in home, school and office for DIY crafts, artistic creation or repair, appropriately work on various materials such as paper, glass, wood, fabric, metal, plastic, ceramic, etc.

Product features

Hot Glue Gun Kit

The POPULO glue gun adopts a wireless design and can be recharged. It can be used after heating for 25 seconds. It will automatically shut down after 5 minutes of non-use. It has a drip-proof base and a comfortable silicone grip, suitable for both adults and children. The glue gun kit comes with 26pcs glue sticks that are perfectly used in the home, school, and office for DIY crafts, artistic creation, or repair.

Matters needing attention

If you use it too quickly, Just because the green light turns red doesn't mean it's broken. You have to wait a few seconds for it to heat up and wait for the red light to turn green before you can use it again.

Mini Cordless glue gun

The POPULO cordless hot glue gun eliminates the restriction of the wire, can be taken to any place, very easy to take care of, suitable for adults and children.

Glue Gun Stand

Our multi-function stand not only supports charging but also has a drip-proof baffle on the front, it can effectively prevent the damage caused by glue drips.

Glue Sticks for Hot Glue Gun

The hot glue gun is suitable for any glue stick with a width of 0.275 inch(7mm). At the same time, we are giving away 26 pcs colorless and multi-colored glue sticks.

Fast heating in 25 seconds

It’s amazing, it heats up quickly in 25 seconds，so it can greatly reduce the waiting time and let you start working quickly

Rechargeable Battery

It can be charged by USB and supports any 5V charging interface. It can be used for several hours after charging to 2.5 hours.

Automatic Shut-off: 5 Minutes


Very user-friendly design, our glue gun will automatically shut down after you stop working for 5 minutes. It can prevent the heating element from burning out and increase the battery life.

• 🔔【Stand-UP Base Design】The upright base is designed with a flat and stable base。Keep our hot melt glue gun upright and can securely stand on the table without tipping over. while working on Arts and Crafts，no need to worry about constantly fall over. Release hand without holding the hot glue gun all the time.
• 🔔【USB Rechargeable:】Equipped with 2600mAh rechargeable battery. The Glue Gun requires 180min to fully charge, which supports 60-90min continually working time after fully charged. Convenient and safe to use, also easy to carry.
• 🔔【NO DRIPS】The heating chamber of many hot glue guns are poorly designed, which will cause huge mess every time it is used. Ours has a drip-free nozzle, anti-dripping heating chamber and sealing ring, it can effectively avoid the constant dripping.
• 🔔【Rapid Heating】Must be preheated before use. Utilizes high-quality ceramic PTC thermal heating system, achieving quick preheating of only 3-5 minutes. Besides, the Melt Glue Gun also comes with the feature of automatic temperature control.
• 🔔【Useful Accessories&Multiple Purposes】Provides 30 pcs safe, non-toxic and meltable mini glue sticks (7*140mm). In addition, 6 silicone finger protectors are attached to prevent you from accidental scalding.Our Hot Melt Glue Gun is deal for various DIY, such as crafts & arts, home decoration, quick repair, making Christmas decoration, gifts. It can work well with plastic, glass, paper, cotton, fabric and other materials.

User questions & answers

Question:	Can this be used with styrofoam
Answer:	I'd say it takes just around two minutes to fully heat the glue stick.
Question:	Do you keep it in on or off position while charging & is light red while charging? then unplug & turn on & light is blue
Answer:	This Glue Gun is cordless and we provide 45-day money back and 18-month after-sales guarantee, please be assured to purchase it. Thank you.
Question:	Did i read that correctly? It requires 100 ion batteries
Answer:	Dear customer, Thank you for your trust and support. The diameter of the sticks is 0.28in, so it cannot use 0.43 diameter sticks, please kindly note.
Question:	Is this a regular size glue gun or a " mini " glue gun
Answer:	It’s not a lightning charger if that’s what you mean. They send the usb cord with it and you can plug that into the part that plugs into the wall if you want but it’s not a long cable at all, maybe 8-10” if I had to take a guess

Product features

Gorgeous Festival Decorations &Enjoyable Family Time & Unblock Your Creativity

An excellent glue gun is perfect for multipurpose projects and crafts. It helps you make unique and special holiday decorations, cards, gifts, and packaging to delight your loved ones.

Finishing a piece of creative, epic art with your kids together is not only building a close relationship, but it also boosts hands-on skills and develops great imagination of your kids.

No matter you are a beginner or a master craftsman, just grip the OUTUL glue gun, overcome your fears, and start creating something new and crazy! The innovative, lightweight glue gun always makes you perform like a real pro!

100% Leakproof

Specially designed with leak-proof structure inside the nozzle to avoid leakage.

Discharged Glue Amount: 3-5g/min

Safety Protection

The included silicone finger protectors are used to protect you against accidental scalding.

Upright Design

Stand-up base provides more space for handle and trigger, enhances the stability, also improves the using comfort.

Package list

1*hot glue gun

--5.5*5.3"/14*13.5 cm

30* glue sticks

--0.3*5.5" /0.7*14 cm

6* silicone finger protectors

1* USB charging cable

-- 0.9*1.8"/2.5*4.5 cm

1* user manual --0.8*1.8"/2.1*4.5 cm

1* package box --0.7*1.8"/1.8*4.5 cm

Operation Analysis & Warning

1. Insert the glue stick.

2. Turn on the switch.

3. Preheat for 3-5 min.

4. Slightly pull the trigger.

Warning:

Shall not pull out the glue stick after the work done to prevent scalding.

It can be used normally after 5~8 min of preheating next time.

• ✅【Base Stand-Up】- Comparing with other glue guns, this one built-in unique stand-up base to keep your hot glue gun from tipping over. It's an ideal choice for all hot melt glue gun users, making your working easier and never get burned. Valentine gift for women men boyfriend girlfriend sweet heart.
• ✅【Corded / Detachable Cord Use】- Cord is removable, after the hot glue gun heating up completely, detach the power cord, it can be used without cord (the longer you plugged-in, the longer you can use it cordless), allows you to move around your workspace. Retrurn to reheat for next use. This is NOT a charging hot glue gun with a battery.
• ✅【Rapid Heat Up 】- This dual power hot glue gun can switch to 80 & 120W power settings, takes 1-3minutes to heat up. SAVE GLUE TIPS: The residual heat and pressure can help the glue gun continue to working even power off, so it’s better to turn off the power a few minutes before stopping use for saving the glue sticks and energy.
• ✅【Full Size & Safe】- Full size (Not Mini) hot glue gun featured with anti-scalding protection copper nozzle, ceramic PTC heating system is UL certified. Made with premium plastic engineered to protect from the sustained high pressure and temperature. An ergonomic design and stream handle make it comfortable to grip and easy to hold.
• ✅【Widely Use & Warranty】- Hot glue gun with dual power settings, allowing for light and heavy-duty jobs, can be used of DIY, office, craft & arts & home & quick repairs, household jobs, festivals decoration / gifts... Equipped with 12 premium hot glue gun sticks (long: 3.93" (10cm) / diameter: 0.43" (11mm) ), 3 silicone finger protector. Please contact us for any issues, our technicians will be always there to support you.

Product features

An excellent project starts with a wonderful glue gun

MONVICT hot melting glue gun can be used in both industrial and household grades. It is suitable for bonding materials such as wood, plastic, glass, metal, stone, ceramic, shell, brick, paper, wicker, lace, cotton, fabric.

Unique Innovative Design：

• Separate Power Socket: corded and detachable cord use.
• Base Stand-Up:safe, stable and convenient.
• Fast heating: 80-120W dual power use, 1 - 3 minutes to heat up.

Features :

• Hot glue gun uses for Φ 0.42-0.43" glue sticks
• Use voltage: 100-240V
• Frequency: 50-60Hz
• Length of charger cable: 55.11 inch

Stable Base Stand

• Our hot glue gun has a unique stand independently design, which is more convenient and safer to use than other hot glue guns with a front bracket. No more worry about the falling and burning.

Cord Removable

• Our 80 / 120 W dual power hot melt glue gun is designed with a separate power socket, allowing you to use it two ways : corded use & detachable cord use after preheating, the longer you plugged-in, the longer you can use it cordless. It will be easier for you to complete your project anywhere.

Anti-Heat Copper Nozzle

• Our full size hot glue gun is equipped with a copper nozzle, which has a longer durability than others with poor durability aluminum nozzle.
• Taking into account the use of glue gun safely, our hot melting glue gun uses an anti-heat cover on the nozzle, which can effectively prevent burns from contacting the nozzles.

Finger Protector

• To conveniently use the hot melting glue gun, we presented 3 pieces of silicone finger protector. They are flexible and won't affect the flexibility of fingers when wearing it, put on and take off easily. The most important thing is that they protect your fingers.

Glue Sticks

• Our glue gun comes with 12 pieces of high viscosity glue sticks makes it easy to bond wood, metal, glass, cardboard, plastic, etc. High transparency makes it look like crystal when melted.

How To Use?

Using Tips:

1. Please insert the glue stick and push it a bit into the glue gun with your hand, then squeeze the trigger to push the glue stick to the heating part.
2. If you are using glue sticks that are shorter than 5.5” long, please insert two glue sticks to use the glue gun. The second glue stick will help the melted glue to come out from the nozzle.
3. This is not a hot glue gun with a battery, you have to heat up the glue gun first, and then you use it with cord or without cord.

Product Show And Warm Tips

About dripping and save glue sticks:

• This is a 80/120W hot glue gun, glue melted faster and more uniform than other mini glue guns. The melted glue in the nozzle will continue to drip after the glue gun unplugged and powered off. That's a normal physical phenomenon, do not be worried, because the heat and pressure take time to dissipate. The method of saving sticks and no dripping is to turn off the power a few minutes before stopping use.

Warning Tips：

• Do not pull out the glue stick that is not used up from the glue gun
• Do not touch the preheated glue gun nozzle directly with your fingers
• Do not let the glue gun get water

Cautions：

• Do not use the glue gun under humid conditions.
• Not intended for children under 12 years old without adult supervision.
• Store hot glue gun only after the nozzle cools down otherwise the remaining heat off the nozzle can damage other items.
• The nozzle and the glue will be heated over 200℃! Please DO NOT touch the nozzle and glue while working. In case of contact with the hot nozzle or glue, immediately wash with cold water, then remove glue from the skin.

​

​

Product description

RYOBI introduces the new ONE+ 18-Volt Hot Glue Gun. With an LED-lit on/off indicator, you’ll always safely know when your glue gun is in use and when it is not. This heavy duty hot glue gun is designed to work with All-Purpose and High Strength Adhesives.The Hot Glue Gun has up to 3.5 hours of runtime, is compatible with any RYOBI ONE+ battery and is a part of the ONE+ System of over 70 great tools that all work with the same 18V battery platform.RYOBI introduces the 18-Volt ONE+ Lithium-Ion 2.0 Ah Battery and Dual Chemistry Charger Upgrade Kit. The battery in this kit features lithium-ion battery cells, providing the user with up to 1.5X more runtime. The battery is engineered to deliver fade-free power for maximum performance. The 18-Volt charger is compatible with all RYOBI ONE+ lithium-ion batteries and features IntelliPort technology to maximize the lifetime of your RYOBI batteries. This kit includes 2.0 Ah battery, dual chemistry charger, an operator's manual, and is backed by a 3-year limited warranty.

• Set includes 2 Items - Ryobi P305 and P63
• P163 Includes: P190 18-Volt ONE+ 2.0 Ah lithium-ion compact battery, P118 dual chemistry charger and an operator’s manual
• P305 designed for heavy duty gluing applications
• LED indicator lets you know when it's ready to use

User questions & answers

Question:	Is the glue an automatic or do you have to pump the trigger
Answer:	Dear friend, The battery can last about 50 minutes in working status and one and half an hour in standby status. Hope this helps Kaya Depot
Question:	Are any glue sticks included
Answer:	Dear friend, The glue gun is made in China which features excellent quality and good performance. Hope this helps Kaya Depot
Question:	Can I just get the gun without the battery and charger. I already have ryobi tools
Answer:	Dear friend, The glue gun doesn't have low temp and high temp settings. Hope this helps Kaya Depot
Question:	Does the tip unscrew off
Answer:	Dear friend， When you press the on switch button，the light should turn to blue wait for several minutes for preheating Hope this helps Kaya Depot

• REAL CORDLESS RECHARGEABLE HOT GLUE GUN:Go anywhere, glue anything. Cordless operation gives you the freedom to take the glue gun to the job-site conveniently. When you doing small hand-made projects, you can move to where you want to at any time, regardless of the blocking of the wires.
• SPECIAL DESIGNED FOR KIDS: The small size 4.3*5.1inch hot glue gun completely designed for your children. AUTOMATIC POWER-OFF SYSTEM: Turn off the glue gun after 10 minutes of non-use for safety and saving power. DRIP-FREE COPPER NOZZLE: Excellence thermal conductivity make glue flow more smoothly and faster. COMFORTABLE GRIP AND TRIGGER: assures accurate flow control, making consistent application of hot glue easier. DETACHABLE STAND: keep the gun stable and upright, preventing glue back up
• SAFE FOR KIDS USE: the low temperature cordless hot melt glue gun (Peak melting temperature at about 300 degrees F.) feature prevents burning from hot glue. Non-toxic plastic, Automatic power-off, On/ Off switch, LED indicator and Non-drip copper nozzle make your boys and girls safer when they are addicted to creation. It is an ideal adhesive for home and school DIY crafts projects including metal, wood, glass, card, fabric, plastic, and ceramics and so on.
• USB CHARGING & INDOOR OUTDOOR: This 20W/3.6V cordless hot glue gun equipped with 1800mAh rechargeable battery, fully charged for 180 minutes and supports glue gun to continually work for 120 minutes after fully charged, convenient safe and easy to carry. You can do kids woodworking projects with your children outdoors, or take it in your travel and vacation to experience a great parent-child lesson.
• MULTIPURPOSE GLUE GUN KIT WITH GIFT CASE: Super strong adhesive 60 pack 0.27" diameter GLITTER COLORED glue sticks, 3 finger protectors and handmade tutorial guide in the beautiful gift case. And the hot gun adopts leak-proof glue design allows for accurate flow control and will help you save much more glue sticks.

Product features

Safe,Small, Easy to Use for Kids Adults

• Automatic Power-Off System
• Comfortable Grip And Trigger
• Detachable Stand

Put Wings On The Imagination

The toolbox and glue sticks provided in the set, as well as various small accessories and creative templates. Plus the portability of the wireless glue gun, can allow children to create and explore anytime, anywhere.

Exploring Life

This is not only a toy, but also a tool. Under the guidance of parents, children can repair their toys or furniture and let them know and master some common sense of life!

A Tool For Parent-child Interaction

NEX&CO is like an emotional bond. In the process of using it, you will be surprised to find that your family relationship adds more joy and memories.

CORDLESS & BATTERY OPERATED

Go anywhere, glue anything. Cordless operation gives you the freedom to take the glue gun to the job-site conveniently.

60 PACK GLITTER STICKS

Total 60 PCs Glitter glue sticks are a great way to get creative with hot melt. They come in a variety of colors including, gold, silver, green, red and multi-color. These glitter glue sticks are made of a general purpose adhesive with good adhesion to many surfaces.

PACKAGE INCLUDED

• 1 x Cordless glue gun
• 1 x USB charging cable
• 60 x Colored glue sticks
• 3 x Finger caps
• 1 x handmade tutorial
• 1 x User manual
• 1 x Gift storeage case

CREATIVE GUIDE

There is a creative guide for children in the package, as well as a mask for the pattern.Your kid can follow the pattern on the guide to make creative hand-made works.

LIFETIME SUPPORT

NEX&CO was founded with a single purpose: to create high quality crafts glue guns that let your kids creativity shine.

All of our products carry a lifetime after sales service against defects in materials or workmanship.

• 【Automatic Power-Off System】Added intelligent safety system, it will power off automatically after 10 minutes of inactivity to protect the safety of the user and save energy simultaneously. Moreover, the cordless hot glue gun has battery & heating indicators that you can always know the energy/working status of the kids glue gun kit. The surface is made of a flame retardant material to protect the hands from burns.
• 【Long Standby Time &Cordless Design】No cord No limits! The hot glue gun kit is equipped with a upgraded 2200mAh premium lithium-ion battery. It only takes 2 hours to fully charge and can work for up to 100 minutes.The cordless glue gun charges with standard USB cable for convenient cord-free operation, which can provide more convenience and portable operation.
• 【Fast Preheating Time】The mini hot glue gun with high-tech electronic heating technology,features a fast 1 minutes warm up time.Update smart temperature control design enables it to remain constant temperature.
• 【Safety & Efficient】Secure ON/OFF power switch on the handle and LED working indicator for added safety.Built-in leakproof device and heat resistant silicone nozzle prevents mishaps and waste.Trigger propulsion device and leak-proof controls glue flow and will help you save much more glue sticks.Note: Press and hold the power button for 2~3 seconds to start the hot glue gun cordless
• 【Wide Application】 This hot glue gun with glue sticks is an ideal tool for various DIY, such as crafts & arts, home repair, making Christmas decoration, gifts. It can work well with plastic, glass, paper, cotton, fabric and other materials. It bonds immediately and cools down super quickly, great for personal use of kids, children.

User questions & answers

Question:	Can it use this to patch hats
Answer:	I installed them on a 2010 Honda sable and came with different thread connectors so I reckon they would fit
Question:	How does the remaining glue still in the gun get melted once the glue stick is one third melted
Answer:	Yes, they fit for your bike
Question:	Is this full size or mini
Answer:	yes it fits

Product features

An excellent project starts with a wonderful glue gun

Drip-free Nozzle & Leak-Proof Ring — Can effectively avoid the situation of spills and prevent leakage of the glue.

Long Standby Time — 2200mAh Lithium-ion battery ensures a long standby time.

1 Min Fast Preheating — Update smart temperature control design enables it to remain constant temperature.

Automatic power-off system — It will power off after 10 minutes of inactivity for safety and saving power.

Safety Design — The PTC heating component and the built-in fuse ensure that you can work with it safely. By automatically controlling the temperature, the glue gun can keep the temperature constant and prevent overheating.

Comfortable Ergonomic Handle

The ergonomic handle is very comfortable for our hands to grip, and the non-slip texture can make us hold the glue gun more firmly.

3 Protective Finger Caps

Comes with 3 finger covers in different sizes to fit your thumb, index finger and middle finger. Made of safe silicone they can withstand high temperature and prevent scalding.

2200mAH Li-ion Battery

Provides Stable and Conveniet Working Condition

Fully charged in two hours

Can work for up to 100 minutes

LED Indicator

While charging:One battery light is red.

Finished charging: One battery light changes from red to green.

Low power: Both battery light turns red

Heating: One heat lamp is red and the other is green

Finished heating (ready to use) : Both heat lamp turns green

• ★ 15 SECONDS FAST HEATING★ Enertwist 4V cordless hot glue gun only needs 15 seconds for fast heating, heating time is faster than 90% tranditional heating system. It really can shorter your working time and provide better user experience.
• ★ AUTOMATIC POWER-OFF SYSTEM★ Intelligent safety system can automatically power-off after 5 minutes no using, this smart system can provide more safety using and aviod glue waste.
• ★ LONG STANDBY TIME ★ Enertwist industrial mini hot glue gun with internal 2500mAH Li-ion battery provides more than 30min run time for continuous working. Attached with standard rechargerable USB cable for easily and convenient charging.
• ★ ANTI-DRIP FINE TIP ★ Enertwist rechargeable hot glue gun with anti-drip fine tip can efficiently decrease 15% of the glue waste, silicone tip cover also provide heat-resistant to aviod burns during working process.
• ★ LED INDICATOR★ Battery indicators and ON/OFF power switch are located on the top of the glue gun. It is easily for viewing and understanding battery status during the working process.

User questions & answers

Question:	Can you leave it plugged in to the usb charger. Continuously whenever your not using it or should it be removed from charger when it’s fully charged
Answer:	Switch forward to the tip is 100W, I think. This is what I use most of the time.
Question:	How long does this thing take to charge?! It's been plugged in since yesterday
Answer:	The large size. You might want to get the long glue sticks as the gun used them quickly.
Question:	Does this use the larger diameter glue sticks or the smaller ones
Answer:	I think it would fit up to about 32" waiste. There's not a lot of "give" to it. Not very stretchy.
Question:	Is there a way to make the glue sticks not fall out of the gun all the time
Answer:	Yes. I would extend the cord to the furthest length. The keeper can practice punting the ball and the return ball with come back bouncing, or the can kick it off the ground and the ball will return lower. The harder you kick it the harder it returns. My children (ages 8, 11, and 13) use it with every aspect of soccer, from kicks and punts to throw-ins and trapping. I have even allowed them to use it in the house with the cord shortened all of the way to reduce the distance the ball is kicked and with added instructions for them get the ball on the ground and not to kick too hard.