8 best dewalt airbrush kits

Product description

The new DEWALT DWFP12231 18 gauge, 2-Inch Brad Nailer Kit is an excellent tool with many enticing qualities. It features a long life maintenance-free motor to keep from staining the work surface. The magnesium body delivers a strong and lightweight design. It also features a tool-free depth -of-drive adjustment with detents for proper setting of nail heads, along with a tool-free jam release mechanism for easy nail removal. The rear exhuast helps to keep contaminates away from work. This unit is made to drive 18 gauge nails from 5/8" to 2" in length, with a sequential style trigger, and 100 nail magazine capacity. This unit has a removable non-marring nose tip with on tool storage, and an integrated rubber grip for improved comfort and anti-slip grip. It also has an adjustable belt hook which allows the tool to be kept near the user. This kit also includes carrying case and owner's manual. Refer instruction manual before use. A compressor is required and not included.

• Long life maintenance-free motor to keep from staining the work surface
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Tool-free jam release mechanism for easy nail removal
• Rear exhaust to keep contaminates away from work. Operating pressure 70 - 120 psi
• Drives 18 gauge nails from 5/8" to 2" length. Power Source: Pneumatic. Power Tool Type: Pneumatic. Note: There are no nails included
• Compressor is required to use this product but is not included

User questions & answers

Question:	Can someone recommend an air compressor that would power this nailer? I don't know a lot about tools and don't want to buy larger than i need
Answer:	: A Husky 4 gallon portable will run three of these nailers. I believe it cost me $250.00. It's pretty quiet. Both of these cost less than a battery one
Question:	What is the difference between 18 gauge brad nailer and 16 gauge finishing nailer? I need to install trim, build bookcase and install decking floor
Answer:	Brad nails are formed from a fine 18 gauge wire, while finish nails are made from heavier 16 or 15 gauge wire. Finish nails are the correct choice for fastening larger crown and baseboard trim, brad nails are used to install smaller trim to help prevent splitting and to promote a cleaner looking job with less touch-up work after the nailing is done.
Question:	Would I need to purchase anything else (battery) in order to use? I know absolutely NOTHING about power tools
Answer:	Hello, Thank you for writing ACME Tools. The DWFP12231 Brad Nailer is a Pneumatic tool so you will have to use an Air Compressor and a hose with the proper fittings. Other than that, this unit is very straight forward and easy to use.
Question:	what is the voltage
Answer:	The voltage is 765 kV and it is also powered by two Siemens & Halske alternators rated 30 hp (22 kW), 2 kV at 120 Hz and uses 200 series-connected Gaulard 2-kV/20-V step-down transformers provided with a closed magnetic circuit, one for each trigger. Hope this helps.

Product features

DEWALT DWFP12231 18-Gauge 2-Inch Brad Nailer Kit

Product description

INCLUDES: Two Universal Air Couplers (attached) Instruction ManualFEATURES: 3.0 SCFM delivered @ 90 PSI pump, 2.5 gallon tank and 200 max PSI enables large amount of nails to be fired and provides quick recovery Durable oil free pump provides extended maintenance-free operation Low 71.5* dBA allows for quieter operation (*Tested per ISO3744) Low 12 amp draw motor provides easy start-up and reduces breaker tripping Lightweight (36 lbs), thin (12.5") and compact design is easy to carry and store Compressor can be operated/stored in either the vertical or horizontal position

• 3.0 SCFM delivered at 90 PSI pump, 2.5 gallon tank and 200 max PSI ; Pump Speed 2,300 rpm
• Durable oil Free pump provides extended maintenance Free operation
• Low 71.5 dB allows for quieter operation;High flow regulator for increased Performance
• Low 12 amp draw Motor provides Easy start up and reduces breaker tripping
• Lightweight (36 pounds), thin (12.5") and Compact Design is Easy to carry and store

User questions & answers

Question:	Hardwood installs, i been using 6gal @2.8 scfm will it do as good if not better being a 2.5 tank w/3.0 scfm's. Will this work
Answer:	This model delivers 3.0 SCFM @ 90 PSI with a maximum tank pressure of 200 PSI. Please consult your tools CFM requirements to confirm if this will work.
Question:	Will this run a standard 1/2" impact wrench.? Im looking for a small garage unit for tires and minor service. Die grinder, impact etc
Answer:	No enough air capacity..
Question:	What is the duty rating on this unit? Is it 50% like most oiless
Answer:	"This air compressor pump is capable of running continuously. However, to prolong the life of your air compressor, it is recommended that a 50% average duty cycle be maintained; that is, the air compressor pump should not run more than 5 minutes in any 10 minute period." (Quoted from the instruction manual) -- so the short answer would be yes.
Question:	Can anyone confirm this compressor will run off a Honda EU2000i generator
Answer:	Your generator could this pretty easily. Any (US) generator rated for 1400 watts or higher will work. Most (US) 1000w generators will work, so long as they accept spikes up to 1400w. Yours accepts 1600w continuous with spikes up to to 2000w.

Product features

DEWALT DWFP55130 Heavy Duty 200 PSI Quiet Trim Compressor

This 2.5 Gallon, 200 Max PSI, compressor is ideal for supporting a variety of pneumatic and air tool applications. The oil-free pump delivers 3.0SCFM @ 90PSI for long tool runtime and quick recovery. The compressor can be operated/stored in either the vertical/horizontal position for quick and easy space-saving around a garage or jobsite.

Product description

Features and Benefits: DCGG571 20V MAX Lithium Ion Grease Gun - Powerful motor delivers 10,000 max psi to power through clogged grease fittings. High-volume pump pushes up to 5.0 oz min high-flow applications. DCF899H 20V MAX XR Brushless High Torque Impact Wrench with Hog Ring Anvil - Delivers up to 700 ft.-lbs. of max torque and 1200 ft.-lbs. of max breakaway torque. Provides Multi-speed control for a variety of applications (0-400 1,200 1,900 RPM). DCL043 - 3 bright LEDs illuminate dark jobsite work areas. Can be seen up to 508 yards or 1,525 feet. Kit includes: DCF899HB, DCGG571B, DCL043, DCB204, Charger and Carry Bag

• 1 Year warranty on material and workmanship
• This product meets customer requirement
• Product is manufactured in Mexico

User questions & answers

Question:	Does this come with everything pictured? (impact, grease gun, light, 2 batteries, and charger
Answer:	Nothing sent with purchase dictates where it was made. Sorry, but I'm thinking given most of this "isn't" I'm sure it's not. It only came in a shipment bag and clear plastic wrapping with order receipt. Nothing else. Sorry, I couldn't help more.
Question:	Is the impact 1/2” drive
Answer:	Appx 8 inches tall by 9 1/4 inches wide. Tall meaning from bottom of Eagle to above head of Eagle. Wide meaning from left side to right of Eagle. Hope that helps
Question:	Is there a guard over the led light on the 1/2 inch impact? i just received mine & it is exposed
Answer:	8 inches tall by 9 1/4 inches wide. Tall is from bottom of Eagle to above Eagle. Wide meaning from left side to right side of Eagle. Hope that helps.

Product description

INCLUDES: 3/8" Nutsetter 1/4" Nutsetter 5/16" Nutsetter Impact Ready Sleeve 3" Impact Ready Screw Lock Holder 2" PH2 Impact Ready BitFEATURES: Minimizes Drops and Reduces Wobbles Reduce Breakage Long Life

• Minimizes Drops and Reduces Wobbles
• Reduce Breakage
• Long Life

Product description

The DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit features a DWFP12231 18 GA brad nailer, and a DWFP55126 compressor. The Brad Nailer drives 18 gauge nails from 5/8" (16 mm) to 2" (50 mm) length. This nailer offers a long life, oil-free motor with a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. It also has a tool-free jam release mechanism for easy nail removal. The rear exhaust to help keep contaminates away from work, and a magnesium body delivers strong & lightweight design. It also has a removable non-marring nose tip with on tool storage, and an adjustable belt hook that allows the tool to be kept near the user. The Air Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI for long tool runtime and fast recovery (Tested per ISO 1217). The durable oil-free pump provides long maintenance-free operation, and a low 75.5 dBA for a quiet work environment (Tested per ISO 3744). The low 10 Amp draw motor starts easily in cold weather or with extension cord, and it has two regulated, factory installed air couplers to easily support two users. Shroud includes heavy-duty handle, cord wrap and console cover to make unit easy to carry; only 30 lbs (13.6 kg) for easy portability. Kit includes: DWFP12231 18 ga Brad Nailer, DWFP55126 Compressor, Air hose with fittings, sample fasteners, and owners manual.

• DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
• DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI
• Tool-free depth-of-drive adjustment and tool-free jam release
• Low 75.5 dBA for a quiet work environment
• Kindly refer user manual for instructions.
• DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
• DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI

User questions & answers

Question:	what is HP
Answer:	These products are not rated in HP.
Question:	Can i use 200 feet of air house will the compressor take it
Answer:	It's not advisable to use such a long air hose, even if it would work. It would be useful to inquire about a long electrical extension that would go at least half way. A qualified electrician could shed some light on this (pun intended). I wouldn't do either; there is some risk in running electrical wire or an air hose under pressure such a long distance.
Question:	Is this good for crown molding and flooring installs with it support for what I am looking to do
Answer:	Ideally you will want a finish nailer for crown molding work. Please contact DEWALT at 1-800-433-9258 for further assistance.
Question:	What is the length of the included hose
Answer:	I haven't measured it but I'm thinking it's probably a 25'

Product features

DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit

The DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit features a DWFP12231 18 GA brad nailer, and a DWFP55126 compressor. The Brad Nailer drives 18 gauge nails from 5/8" (16 mm) to 2" (50 mm) length. This nailer offers a long life, oil-free motor with a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. It also has a tool-free jam release mechanism for easy nail removal. The rear exhaust to help keep contaminates away from work, and a magnesium body delivers strong & lightweight design. It also has a removable non-marring nose tip with on tool storage, and an adjustable belt hook that allows the tool to be kept near the user. The Air Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI for long tool runtime and fast recovery (Tested per ISO 1217). The durable oil-free pump provides long maintenance-free operation, and a low 75.5 dBA for a quiet work environment (Tested per ISO 3744). The low 10 Amp draw motor starts easily in cold weather or with extension cord, and it has two regulated, factory installed air couplers to easily support two users. Shroud includes heavy-duty handle, cord wrap and console cover to make unit easy to carry; only 30 lbs (13.6 kg) for easy portability.

Kit Includes:

Product description

Made with a durable lightweight construction and convenient low noise design the Black & Decker Oil-Free Hand Carry Compressor is easy to handle and extremely portable. Includes a .75 SCFM, 135 PSI and a one gallon capacity.

The DeWalt D55140 One-Gallon, Max 135-PSI Trim Compressor is a one-person tool that offers efficiency and dependability. This indispensable hand-carry compressor features a lightweight, compact design and quiet operation for punch-out work. Ideal for finish carpenters and woodworkers, the D55140 can be used for remodeling and custom installation of shelves or other furniture, cabinet trim installation, pressure-testing new plumbing lines, and more.

The DeWalt D55140 Max 135-PSI Trim Compressor At a Glance: 2.6-Amp motor; 90 - 135 PSI Quiet 69-dB rating Durable oil-free pump Compact and portable at 24 pounds

Control panel features universal connection for use with any pneumatic tools. View larger.

Portability and quiet operation make the compressor especially versatile.

Versatile, High-Performance Compressor

Whether you're testing plumbing lines or making quick work of a remodeling project, the D55140's high-performance operation simplifies trim work and other jobs.

The D55140 features a one-gallon tank and a 2.6-amp motor that delivers 0.75 SCFM at 90 PSI and 135 PSI max, which makes for high-surge performance and quick recovery. Additionally, the draw motor offers easy startup and reduced breaker tripping, as well as a high-flow regulator that provides maximum air pressure to increase jobsite performance. And running at 69 dBA, the D55140 provides end users with a quieter operation compared to the competition.

The D55140 is also equipped with an oil-free, long-life pump, allowing for maintenance-free operation. The oil-free design of the pump eliminates the need for you to check or refill the pump, and it also helps keep your jobsite clean by preventing oil from transferring to your work surface.

Exceptionally Durable for Long Life

The efficient and unique design of the D55140 ensures maximum durability and longevity. DeWalt built the heavy-duty cast-iron compressor with an innovative roll cage and a full-protection frame designed to shield the unit from routine wear and tear and accidental damage. In addition, a wrap-around control panel covers the frame and provides further protection of key compressor components.Compact, Lightweight Design for Easy Portability

Measuring 24 pounds and with a height of just nine inches, the D55140 is ideal for those who prefer hand-carry compressors. For further convenience, DeWalt equipped the D55140 with a one-hand, universal quick connection for easy-to-use operation with any of your pneumatic tools. And for increased efficiency, the D55140 was designed with a ball drain valve for quick and thorough tank draining and with a convenient cord wrap for easy storage.

What's in the Box

135-PSI compressor and manual.

From the Manufacturer

Ideal for finish carpenters and woodworkers, the D55140 can be used for custom installation of shelves or other furniture, cabinet trim installation and for pressure-testing new plumbing lines. Performance -The D55140 produces .75 SCFM at 90 PSI, 135 PSI (Max), delivering high surge performance with quick recovery, and at 69 dBA, provides end users with a quieter operation, compared to existing compressors in the marketplace. The compressor was designed with a 2.6 amp draw motor to deliver easy start-up and reduced breaker tripping, as well as a high flow regulator that provides maximum air pressure to increase jobsite performance. The D55140 is also equipped with an oil-free, long-life pump, allowing for maintenance-free operation. The oil-free design of the pump eliminates the need for users to check or refill the pump, and also helps to keep the jobsite clean by preventing oil from transferring to work surfaces. Ease of Use/Portability - The compact design of this unit is ideal for end users who prefer hand carry compressors. Weighing just 24 pounds and measuring 9” wide, the compressor is easily transported and stored, making it ideal for knock-out work. In addition, DEWALT equipped the compressor with a one-hand, universal quick connect for easy-to-use operation. For increased efficiency, the D55140 was designed with a ball drain valve for quick and thorough tank draining and a convenient cord wrap for easy storage. Durability - The efficient and unique design of the D55140 ensures maximum durability and longevity. DEWALT built the heavy-duty compressor with an innovative roll cage, full-protection frame design to shield the unit from routine wear and tear and accidental damage. In addition, a wrap-around control panel covers the frame and provides further protection to key components of the compressor.

• Heavy-duty 1-gallon trim compressor with protective roll cage
• 135 psi maximum, durable oil-free pump, low 71 dB rating, low 2.6 amp motor
• Includes 1 compressor; hose & nailer not included
• 9-inches wide; 24 pounds; 1-year warranty

User questions & answers

Question:	Can I use 220V
Answer:	Made in USA. I.E.E.
Question:	What are the actual dimensions? The ones in the description are contradictory
Answer:	Everything we've seen on this requires it to be installed horizontally
Question:	Is this 1 gallon compressor enough to work with 3'' nail air nailer
Answer:	Not sure what the specs say. I have no problem with mine on a Dewalt with 175 psi tank pressure.
Question:	hows does it recharge
Answer:	If you put a p-trap before the rise, it will "percolate" up. It's how you get oil return going up 10 feet on walk-in coolers. If you buy a copper refrigeration trap, 7/8 refrigeration fitting is the same as 3/4 plumbing copper, 5/8=1/2" (od vs id)

Product features

DEWALT Air Compressor, 135-PSI Max

Low Maintenance, High Performance

The DEWALT Air Compressor D55140's high-performance operation makes is made to simplify jobs by powering your air tools, for construction jobs as well as for household applications. The compressor features a one-gallon tank and a 2.6 amp motor to deliver 0.75 SCFM at 135 PSI max. These features results in high-surge performance. The compressor’s high flow regulator provides maximum air pressure that enhances the performance of the machine. All of this and more at just 69 dBA, that makes it so quiet that you wouldn’t notice the compressor unless you see it.

The Oil-free operation of the Air Compression makes it easy to maintain as you will not have to worry about filling in the compressor with oil or changing the pump regularly.

Long-lasting construction

The Air Compressor’s is constructed with heavy-duty cast iron that is surrounded by a roll cage along with a full-protection frame that protects the machine from any damage. Additionally, a wrap-around Control Panel guards the unit an shields the key parts.

Lightweight and Portable

The DEWALT Air Compressor D55140 is sturdy but not bulky. The unit weighs about 24 pounds and is just nine inches in size making it extremely easy-to-carry around when in need. It is easy to connect and saves time.

Product description

This is an O.E.M. authorized part. Fits various DEWALT models. OEM Part Number 14709709. The product is manufactured in United States. .

• This is an O.E.M. authorized part
• Fits various BLACK AND DECKER models
• OEM Part Number 14709709
• This is a DEWALT replacement part
• Part Number 14709709
• This is an O.E.M. part

User questions & answers

Question:	can I use this gun for polyurathane
Answer:	Yes it really works. The material is very soft. My baby sweats a lot and this protector prevents the crib mattress from staining.
Question:	Can replacement parts be purchased, also will this work for cerakote
Answer:	It's actually a fairly soft waterproof fabric all around with a handy zipper that my triplet boys have yet to figure out how to open (which I'm obviously most excited about). I digress, the material is great, sturdy and not cheap. Hope this helps!
Question:	what kind of compressor should i get? i want to use this for chocolate spray with my pastry
Answer:	Yes. Its very easy to use. Just put the mattress in the cover and zip it up and put a zip tie on the zipper so the kids cant unzip it
Question:	Is this gun hvlp? Can I adjust the fluid and spray pattern
Answer:	No! Most pediatricians tell you to lay the baby on his or her back. Most SIDS victims do not smother from mattress pads, but their brain not sending the signal for them to breathe. You may want to check with your doctor to be sure. Some areas don't recommend blankets or bumper pads due to the smothering risk. Thanks! Dan

Product description

DeWALT DCK302P2 20V MAX XR Brushless Cordless Automotive 3 Tool Combo Kit

• Includes full manufacturer warranty