14 best bit sets

• ULTIMATE SET: 208 Pieces including Nut Drivers, Security Bits, Torx, Slotted, Phillips, and other Specialty Bits in commonly used sizes.
• BUILT FOR WORK: Made of high grade carbon steel (50BV30 & 6150 Grade), sand blasted bits that are made to last.
• PRACTICAL: Comes in a hard plastic case and includes multiples of the most common bit sizes so you can keep working. Labeled slots to keep bits organized.
• QUICK CHANGE: adapter included to allow fast changes between sizes.
• GUARANTEED: Try our Jackson Palmer Driver Bit Set with NO RISK and 100% Money Back - No Questions Asked.

User questions & answers

Question:	Why no triangle bits. worthless. i dont need 100 flat and phillips fml
Answer:	It does list all of the included bits.
Question:	Will it work with impact driver
Answer:	This is designed to work with any version of drills. Is does not come with an adapter for a impact driver.
Question:	Does it work with an ikea fixa screwdriver
Answer:	Very likley
Question:	Are the bits magnetic
Answer:	The bits themselves are not. Nor should they be. Use a magnetic bit holder and you're in business.

Product features

Jackson Palmer 208 Piece Ultimate Screwdriver Bit Set

Made of sand-blasted high grade carbon steel, these bits are built to stand up to any project. Quick change adapter is included for fast switching between sizes. Each set includes:

Product description

DEWALT DWA2T40IR 40 Piece Impact Ready Screw driving Set is part of the DEWALT Flexor line of power tool accessories. Flexor allows bits to flex up to 15 degrees which equals increased durability and reduced breakage for longer bit life. This set allows you to maximize you Impact ready system. It features a 10x Magnetic Screw Lock System for strong fastener retention and is preferred by professionals everywhere. The bits are placed directly in the impact driver; No run out and allows for access areas. It also minimizes drops and reduces wobbling. This set features a full range of sizes, from 2 inch to 6 inch screw driving bits and are removable to be used across a full bit set. These bits are durable and jobsite tough. Set includes: 3/8" Untested, 1/4" Untested, 5/16" Untested, Impact Ready Sleeve, 3" Impact Ready Screw Lock Holder, 2" PH2 Impact Ready Bits, 2" SQ2 Impact Ready Bit, 2" T25 Impact Ready Bit, 2" SL8 Impact Ready Bit, 1" PH2 Bits, 1" SL8 Impact Ready Bits, 1" SL6 Impact Ready Bit, 1" PH1 Impact Ready Bit, 1" PH3 Impact Ready Bit, 1" SL10 Impact Ready Bit, 1" PH2, 1" T15 Impact Ready Bit, 1" T20 Impact Ready Bit, 1" T25 Impact Ready Bit, 1" T30 Impact Ready Bit, 1" SQ2 Impact Ready Bits, 1" SQ3 Impact Ready Bit, 1" SQ1 Impact Ready Bit, 3.5" PH2 Impact Ready Bit.

• Minimizes drops
• Reduces wobbles & breakage
• FlexTorq allows bits to flex up to 15 degrees
• 10x magnetic screw lock system
• Minimizes drops and reduces wobbling
• Reduces breakage and longer life

User questions & answers

Question:	Can I use this with regular drill (not an impact driver
Answer:	YEP! In fact, I use the speed loader to make using my regular drill/driver faster. The Magnet holds the different bits I'm going between.
Question:	are the individual bits magnetic
Answer:	The individual bits are not magnetic. The 1/4' and 5/16" adapters, the bit extender, and of course the magnetic screw holder are. If you use any of these (except the 5/16" adapter) with the bits, then the bits will exhibit magnetic characteristics as well.
Question:	where is made
Answer:	Holder and socket adapter made in Taiwan. The rest is made in Vietnam.
Question:	This may sound really dumb, but how does one remove a bit from the magnetic holder that was in its own bubble, the "magnetic screw lock sleeve
Answer:	I just got mine today. That bit pulls out from the back. I had to wiggle it around quite a bit, and then it came out. It gets easier after you do it a few times. It took me a minute to figure out how to use it. The bits push in from the back, you only use the long bits. It only made sense once I put it in my screw gun. The sleeve slides back on the bit enough to expose the tip. Then you can put a screw on it, and the magnet/sleeve holds the screw in place. That's their theory at least lol. I haven't tried it yet. It seems a little awkward, but I guess you could get used to it if you're putting in a bunch of screws.

Product features

DEWALT DWA2T40IR Impact Ready FlexTorq Screw Driving Set, 40-Piece

Designed for tough jobsite duties, the Impact Ready bits deliver the power, precision and dependability required to handle even the toughest jobs. Complete with an assortment of various bit tips and sizes commonly used on the jobsite, this bit set is the ultimate resource for any handyman, professional or DIYer.

• S2 Material Forging：The drill bit is made of high quality S2 alloy steel ,with sturdy hardened & tempered construction.
• 10 piece sae hex bits size include 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 6mm, 7mm, 8mm.
• 10 piece metric hex bits sizes include 5/64 inch, 3/32 inch, 7/64 inch, 1/8 inch, 9/64 inch, 5/32 inch, 3/16 inch, 7/32 inch, 1/4 inch, 5/16 inch.
• 1/4 inch hex handle can be used with screwdriver and is widely used for household tool repairs.
• Wide Range of Uses: Used in automobiles, repairs, trucks, automobiles, engines, motorcycles, interiors, dashboards, computers, cable boxes, toys, appliances and consumer electronics, drill bits can also be used in many other protected parts.

User questions & answers

Question:	Where are these manufactured
Answer:	Yes, very well -- I've used this blade on stone veneer, concrete block, brick, pavers, natural rock, and mf'd tile.
Question:	What is the length of the bits
Answer:	Like any blade, there is an arrow pointing in the direction of spin. But the easiest way to remember is that the lettering will always face out towards you.
Question:	are these bits made of impact ready alloy
Answer:	5/8" arbor
Question:	Where are these manufactured
Answer:	It’s aggressive on glass and can cause some chipping. For professional results you might consider a glass cutting diamond blade:

Product features

LASER MARK

Clear laser typing makes it easier to find the size you want,The drill bit is made of high quality S2 alloy steel and is phosphatized to improve paint adhesion and corrosion resistance.

INDUSTRIAL GRADE QUALITY

The hex drill bits are made from S2 steel material in a shiny rust-resistant finish

USAGE VERSATILITY

1/4 inch quick release hex shank driver bits fit for electric screwdriver, hand screwdriver, electric drills & air drills.

Product description

The DEWALT DW2166 45-piece screw-driving set with tough case includes the most commonly used screwdriver accessories. It has Philips, square, slotted and double-ended screwdriver bits. The industrial-strength case they come in is durable and provides organization, portability and protection of the bits. The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. The industrial-strength case is strong and durable. The set includes Phillips, square, slotted, and double-ended bits.

From the Manufacturer

The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. The industrial-strength case is strong and durable. The set includes Phillips, square, slotted, and double-ended bits.

• Value: Dollar 40 value vs. purchasing separately
• Bit retention: Tough case container bit retention system keeps bits secure
• Magnetic drive guide: Magnetic drive guide reduces stripping and wobbling
• Bit fit: Includes 12 double ended bits
• Bit tip count: 54 total tips. Clip latch for secure closing
• Steel bits: Hardened steel screwdriver bits
• Durable case: Comes in a strong and durable case

User questions & answers

Question:	Are these strong enough to not strip after being used multiple times? I feel mine always do with just a few uses
Answer:	They are hardened steel. I've used mine on some screws with stripped heads (which would have chewed up the bit if it hadn't been hardened steel). They are hardened and they don't get chewed up. I've had no issues with mine.
Question:	Do u have to have a drill
Answer:	You could probably put it in a Yankee but the drill would be much more up to date.
Question:	Will the bits fit your standard electric drill? My drill is nit a DeWalt brand. Thank you
Answer:	Yes, they will BUT, these aren't really designed for use in an electric drill, these are designed for use in 1/4" hex bit screwdrivers primarily.
Question:	What's the trick in getting these bits back into their plastic holding place? It seems to only bend the plastic
Answer:	Contrary to some answers, the case is very well designed and there is a very simple way of getting the bits back into the case. All you have to do is turn the bit with the flat sides to either side (pointy side to the front , back) then slide it down into the empty slotted area; there should be no resistance if done correctly. The simply push the bits back down seating it into the holder. It's as simple as that.

Product features

DEWALT DW2166 45-Piece Screwdriving Set With Tough Case

The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. It has Philips, square, slotted and double-ended bits. The industrial-strength case they come in is durable and provides organization, portability and protection of the bits.

Product description

IMPACT READY accessories deliver exceptional performance for extreme torque applications. FlexTorq bits feature an Extended FlexTorq Zone to transfer optimal torque in hard joint applications, providing durability & longer life. The bit tip is CNC machined for a precise fit, reducing cam-out under torque.

• Connectable accessory storage system to optimize storage space
• Clear lid allows you to easily see contents at glance
• Small Bulk Storage size fits inside the Small and Medium ToughCase+ (sold separately) - Ideal for organizing loose bits
• Extended FlexTorq Zone* transfers optimal torque
• Patented bit-bar design allows easy removal of bits and customizable placement

Product description

Neiko 10048A

From the Manufacturer

100-Piece Security Bits Set Security bits set contains many of the most common tamper proof type security bit sizes, including tri-wing bits, torx bits, spanner bits, and hex bits. Security bits set contains: 1 - wing nut driver. 1 - magnetic bit holder. 1 - socket bit holder. 1 - 1/4-Inch sq. x 1/4-Inch hex x 1-Inch extension. 1 - 1/4-Inch sq. x 1/4-Inch hex x 2-Inch extension. 3 - clutch bits (No. 1, 2 and 3). 3 - torque bits (No. 6, 8 and 10). 3 - spline bits (M-5, 6 and 8). 4 - tri-wing bits (No. 1, 2, 3 and 4). 4 - square recess bits (No. 0, 1, 2 and 3). 4 - spanner bits (No. 4, 6, 8 and 10). 6 - metric hex tamper proof bits (2, 2.5, 3, 4, 5 and 6). 6 - SAE hex tamper proof bits (5/64, 3/32, 7/64, 1/8, 9/64 and 5/32). 8 - Phillips bits (0, 1, 2{5} and 3). 8 - pozi drive bits (0, 1, 2{5} and 3). 9 - slotted bits (3, 4, 4.5, 5, 5.5, 6, 6.5, 7 and 8). 9 - metric hex bits (1.5, 2, 2.5, 3, 4, 5, 5.5, 6 and 8). 9 - torx bits (T-8, 10, 15, 20, 25, 27, 30, 35 and 40). 9 - torx tamper proof bits (T-8, 10, 15, 20, 25, 27, 30, 35 and 40). 10 - SAE hex bits (1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 and 1/4). Set includes plastic storage / carry case.

• DURABILITY: bits made of high quality chrome vanadium steel for strong hardness that reduce wear-outs and insure longevity,
• PRECISION BITS: precisely and automatically machined bit tips to ensure accurate size, chamfered bit ends insert smoothly into fasteners and protect both bits and fasteners from damaged edges
• CORROSION RESISTANT: each bit has sandblasted finish for corrosion resistant
• ORGANIZED STORAGE: set includes a sturdy plastic organizing case for secure storage and easy carrying
• 100-Piece Tamper proof security type bit set includes: 8-pc Phillips: PH#0, PH#1, PH#2 x 5, PH#3; 8-pc Pozi drive: PZ#0, PZ#1, PZ#2 x 5, PZ#3; 9-pc Slotted: 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8mm; 9-pc Torx Star: T8, T10, T15, T20, T25, T27, T30, T40, T45; 9-pc tamper proof Torx Star: T8, T10, T15, T20, T25, T27, T30, T35, T40; 9-pc Metric Hex: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8mm; 6-pc tamper proof Metric Hex: 2, 2.5, 3, 4, 5, 6mm; 10-pc SAE Hex: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4"; 6-pc tamper proof SAE Hex: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32”; 4-pc Square: S0, S1, S2, S3; 4-pc Spanner: 4, 6, 8, 10; 3-pc Torq: 6, 8, 10; 4-pc Tri-Wing: 1, 2, 3, 4; 3-pc Clutch: 1, 2, 3; 3-pc Spline: 5, 6, 8mm; 1-pc Wing nut driver; 1-pc Magnetic bit holder; 1-pc 1/4" Hex to 1/4" Drive socket adaptor (1” long); 1-pc 1/4" Hex to 1/4" Drive socket adaptor (2” long); 1-pc 1/4” Drive to 1/4” Hex bit adaptor

User questions & answers

Question:	I am fed up with cheap tools that strip out from normal use. Are these hard enough to not deform when turning a screw
Answer:	Yes,1" arbor with 22.23 mm bushing
Question:	I'd like to know whether these can fit a quick change
Answer:	sorry,it can't cut glass tiles.
Question:	What is the "y" shaped adapter used for? i've never seen one of these before. thanx, tom
Answer:	the 7/8" is a knock out from the 5/8".. must have been knocked out.
Question:	Are these bits stainless
Answer:	hello,segment dimension is segment height.the Max speed of this blade is 8730 RPM,it can be use in this saw

Product features

Toolbox Necessity

Our bits are made from a premium, high quality chrome vanadium steel to ensure the best durability in a small bit. This reduces any wear outs and lasts through multiple uses.

Crafted with Quality

Working with dirt, oil, and grease can take a toll on your tools. However, our security bit set has a sandblasted finish that prevents any corrosion or rust from forming so your tools look as good as they did from the first day of use.

Versatile for Household Use

Avoid buying multiple screwdrivers for your different fastening applications. Our 100 piece set is sure to get your job done by saying you a trip to the hardware store to look for the right size bit. Comes with attachments for easy drill usage that's great for DIY projects or garage/home improvement projects.

Precisely Machined Bits

The machined bits are highly accurate in size including the tamper-proof holes, which are perfectly center aligned. The chamfered bit ends also provides smooth insertion into fasteners and prevents any damaged edges from forming.

Stay Organized

Comes with a blow molded case that tightly snaps shut for a safe and convenient way of holding your bits. Easily put it in your work bench or bring along with you on the go. Each slot is labeled with the corresponding size for easy identification.

Product description

The DEWALT 14-Piece twist drill bit set has a black Oxide coated finish for greater wear resistance. The helix is 31° which minimizes the over aggressiveness of a true parabolic flute. The parabolic flute design improves chip Ejection in metal and wood drilling applications.

• 135° split-point drills on contact and prevents walking
• Parabolic flute design improves chip ejection in metal and wood drilling applications
• Black oxide coated for greater wear resistance
• Helix is 31° which minimizes the over aggressiveness of a true parabolic flute

User questions & answers

Question:	Do these bits fit the dewalt impact driver
Answer:	No they only fit in regular drills not impact driver
Question:	Is this good for dry wall
Answer:	Yes, it will easily make a hole through dry wall.
Question:	What is the shank or shaft size? my drill has 3/8" chuck
Answer:	The largest bit is 1/2” so it will fit.
Question:	will they fit 3/8 chuck
Answer:	It is a 1/2 in drill bit set. They will not fit a 3/8th chuck.

• 【208 Piece Screwdriver Bit Set 】ncludes Phillips, Slotted flat, Square, Pozi drive, Nut driver, Spanner, Torq, Tri-wing, Torx star, Hex Head, Tamper proof Torx star, and other Specialty Bits in commonly used sizes.
• 【Quality Material】The drill is made of chrome vanadium steel（CR-V）, which has high strength and durability. Size and dimensions are marked on the drill surface for easy identification
• 【Scope of Application】Includes magnetic extension drill holder and quick release. Can be used for electric screwdrivers, screwdrivers, hand drills and pneumatic tools.
• 【Convenient Storage】Equipped with a special storage tool box, easy to carry. Each drill slot is engraved with the correct dimensions for quick identification and avoids clutter.
• 【Gift】We design beautiful boxes and it is a nice gift. You can give it to your husband, father, lover, family. A set of essential household tools

User questions & answers

Question:	where are these made
Answer:	Yes it would.I have a 14volt hammer drill and have not broken one tip yet.
Question:	Are these bits impact rated
Answer:	nope! metal/plastic/wood use only. use lubrication on metals for bit preservation.
Question:	Does this kit work on a drill master 18 volt cordless 3/8 in. drill/driver
Answer:	All depends on your drill ,I used them on high powered drills and did not break.
Question:	Everything about this set appears identical to the Craftsman set except the price. Is there any difference
Answer:	Good day. Yes, they are compatible.

• Specification:Phillips:0,1,2,3;Square: 1,2,3; Spanner: 4, 6, 8;Temper Proof Metric Hex: 2.0,2.5,3.0,4.0,5.0,6.0; Temper Proof SAE Hex: 1/4",3/16",7/32",1/8",9/64",5/32”;Torx Star:T5,T6;(10)Temper Proof Torx Star: T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 ;Clutch: 1/8", 5/32",3/16"Spline: M4, M5, M6;Tri wing: 0,1,2,3,4,5; TORQ SET: 1, 2, 3,4, 5, 6, 8,10; Torx ttap: TTAP T10, TTAP T15, TTAP T20, TTAP T25, TTAP T30, TTAP T40; H1/4” magnetic bit holder.
• High Grade Steel: Made from heavy duty, high grade S2steel, which will withstand extremely high torque output and provide maximum durability.
• Superior Fitment: Obtained 9 screwdriving system technology licenses for PHILLIPS SQUARE DRIVE, PHILLIP II Anti-Cam-Out, POZIDRIV, TORQ-SET, TRI-WING, MORTORQ Super, TORX, TORX Plus, ttap ensure each bit a precision-machined tip for ideal fit in screw head recesses.
• Durable Molded ABS Resin Case: All these bits are housed in a molded ABS resin case, with easily in/out storage and a full-length metal pin in the hinge for added durability and life.
• This security bit set with color box is a perfect gift for your loved ones.

Product features

About Protorq:

Protorq is specialized in R&D, manufacturing, sales of screwdriver bits, power tool accessories, hand tools, tool accessory sets .

In setting the bar high to ensure quality products, Protorq successfully obtained 9 screwdriving system technology licenses for PHILLIPS SQUARE DRIVE, PHILLIP II Anti-Cam-Out, POZIDRIV, TORQ-SET, TRI-WING, MORTORQ Super, TORX, TORX Plus, ttap.

Product Contents:

60pc 1 inch insert bit (s2 steel):

PH: #0, #1, #2, #3 ;SQ: #1, #2, #3 ; TORX: T5, T6; Spanner: #4, #6, #8;

HEX Temper: H2.0, H2.5, H3.0, H4.0, H 5.0, H6.0, H1/4", H3/16", H7/32", H1/8", H9/64", H5/32”

TORX Temper: T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 ;

Clutch: 1/8", 5/32",3/16"; Triple Square: M4, M5, M6

TRI WING: TW0, TW1, TW2, TW3, TW4, TW5

TORQ SET: Ts1, Ts2, Ts3, Ts 4, Ts 5, Ts 6, Ts 8, Ts 10

TORX ttap: TTAP T10, TTAP T15, TTAP T20, TTAP T25, TTAP T30, TTAP T40

1pc 2 3/8 -inch length magnetic bit holder

Include All uncommon Security Patterns

This bit set includes almost all uncommon drive type bits that will loosen tamper-proof security bits that cannot be unscrewed by regular screwdrivers, which are respectively used on German vehicles (for example Audi, BMW, Opel, Mercedes, Porsche, Volkswagen), home electronics, elevator, military, aerospace applications.

Stainless Steel Magnetic Bit Holder

• Special hardened stainless steel ensures the hardness and strength needed during the job.
• Powerful magnets allows for secure grip of screws.

Prefect Gift

This security bit set with color box is a perfect gift for your loved ones.

Product description

Get one convenient set of bits and sockets for drilling, driving and fastening in one convenient carrying case with the Makita 75-piece metric drill and screw bit set (B-49373). The set includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications. Fastening applications are covered with an assortment of Phillips, Pozidriv, Torx, slotted and hex insert bits. The set also includes titanium nitride coated high-speed steel (HSS-tin) metal and wood drill bits, brad point wood drill bits, and masonry hammer drill bits with straight shank for use with most 3/8” and ½” drills. The kit also includes a center punch, ¼” hex countersink, ¼” hex Nut drivers, and a ¼” hex magnetic bit holder.

• Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
• Includes Phillips, Pozidriv, Torx and slotted insert bits
• Includes Phillips, Pozidriv, Torx, slotted, and hex power bits
• Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre)
• Includes Brad point wood drill bits with size range of (4 - 8 millimetre)

User questions & answers

Question:	Hello, can you ship to Israel
Answer:	I'm traveling to Israel in February. I'll bring one with me. Meet me at the airport.
Question:	will this product work the makita TD090D impact drill
Answer:	no it,s made for drill,no impact drill
Question:	Is there an imperial unit version of this kit
Answer:	If there is I wish I'd bought that one.
Question:	where is it made
Answer:	The set is all made in China. The screwdriver bits are tempered to be very hard and tough. They’re outlasting many of my industrial brand bits and are among the best for finish quality of any bit’s I own. They’re very well made and the quality control is great. The twist drill bits are very good and though not quite as well made as expensive industrial quality drill bits, they’re a good value in my opinion and are holding up well to mild steel drilling.

Product features

Makita B-49373 75 PC Metric Drill and Screw Bit Set

Makita B-49373 is so convenient that it will solve all your maintenance queries in a jiffy. The wide range of 75 Pc. comprises Drill set for drilling into every possible materials such as metal, wood, cement walls etc. It also includes Inserted Bits and Power Bits for fixing and fastening.

Less time, more job done

With the Makita tool kit by your side, you are sure to get your work done. As the kit comes with an option of different tools, it saves you the effort of having multiple tool kits for different maintenance jobs. As all your drill and screw bits are organized in one place, you just have to focus on the job in hand without worrying about searching for the correct screw bit. It is built to endure any kind of tough task.

Easy to Carry and Use

As the multi-bit set comes with a portable case you can carry it anywhere you go. As it offers a wide range of insert bits and power bits that is compactly packed in an easy to carry box, it is just the perfect companion in your emergencies.

Perfect gift for new homeowner

Setting up a new home is never easy. With so many setting up jobs at hand, one needs that one kit that is compact, easy to carry yet utilitarian. The Metric Drill And Screw Bit Set is one such gift that is going to come handy while running errands of the initial setup.

Product description

The Bosch custom case system works with impact tough bit clips, providing the best case for the best bits. Impact tough insert bits have been upgraded to deliver 10x life over standard impact bits. They have an xtended torsion zone to absorb torque peaks to reduce stress at the bit tips, which is important for today's high torque impact drivers. The clips come loaded with eight bits, which snap in/snap out of the case easily, allowing for easy access to carry only the bits needed. The clips provide easy removal of bits with tilt in/tilt out convenience. This customizable organization system features a durable, well designed case to help users increase productivity by reducing time searching for the right bit.

• Impact tough bit design : provides 10x life over standard impact bits
• Xtended torsion zone : helps bit absorb high torque of new impact drivers
• Tilt in/Tilt Out case mechanism : allows easier access to bits
• Customizable, convenient bit clip : allows users to snap in/snap out precisely the bits that they need
• Precision engineered bit tips : deliver a tighter fit and less cam out

User questions & answers

Question:	Does anyone make a t20/t25 torx bit in one piece? Both sizes on the same bit
Answer:	Assuming you're referring to the "Freak" impact, it's because of the 1/2" socket drive. It makes the bit holder longer by just enough not to accept a standard quick-change bit holder. That's why Bosch impact quick-change bit holders have a longer shank.
Question:	Can I use this with a 1/4 or 3/8 inch ratchet driver
Answer:	Hi! For your question on the DDMS40, it would depend on the screw head being used. However, it doesn't come with any. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Could I use this with double end screwdriver bit
Answer:	I don't think you can buy the clips separately
Question:	Where are these bits manufactured
Answer:	Thank you for your question. Yes, the DDMS40 Impact bits are all magnetic. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Easily Accessible

The Custom Case System is designed to be the most straightforward approach to bit organization. The tilt-in/tilt-out mechanism makes it easier to get the bits in and out of the clip.

Durable and Secure

The case features rubber bumpers to make it more durable. It features a secure latch clip to ensure that the case is closed. It's built to stand up tot he toughest job site conditions.

Customizable Convenience

This innovative bit system allows you to customize configurations providing flexibility, efficiency and quick access. Take only the bits needed for a job instead of the whole tackle box.

Best Case for the Best Bits

The Impact Tough driver bits include an Xtended Torsion Zone, which absorbs torque peaks to reduce breakage. The Impact Tough drill bits provide impact-rated shanks and tough construction.

• Cobalt high speed steel along with the titanium coating ensures extreme durability, will stay new and shiny for years to come.
• Different sized shanks ensure compatibility with 1/4, 3/8 and 1/2 in. chuck sizes.
• Non-walking drill tip provides fast and smooth drills on steel sheets, aluminum sheets, wood board, plastic board etc. (the board must be smaller in thickness than the height of step drill bits).
• Please mark the spot that you are to drill for easier drilling and improved drill bits life.
• All the bits come in a well-organized case for easy transport and storage.

User questions & answers

Question:	How good is the quality
Answer:	This is a set of 5 drill bits. You can use either 3/8 or 1/2 drill with the drill bits included.
Question:	Is this for a 3/8 drill or
Answer:	You don't "need" any of these bits. Both, my...another family member and I purchased these as the touting of cobalt, titanium, and High Speed Steel bits made us both believe they were a steal of a steel deal. Boy we couldn't have been more wrong! Destroyed 1st use at slow speed off the speed chart and using tapping fluid to lubricate. These are absolute garbage. AGAIN THESE ARE ABSOLUTE GARBAGE BITS. I've got a free pocket knife from a gas station that drills better. Shavings from the first time we used these bits were put in the MassSpec at his showed NO cobalt at all present. For those that don't know a mass spectrometer gives you a breakdown of the molecules and elements present in a sample. Upon my complaining to the seller, I was told well.... "They're only cobalt colored and aren't intended for use on steel or hard metal alloys." You buy a cobalt %containing bits to handle the higher frictional heats encounters when cutting/drilling tougher steel alloys, stainless, or even just wanting your High Speed Steel bits to last longer. It's so your bit doesn't take damage and be destroyed or worse yet damage the piece you're drilling (especially when you're using tapping fluid too to lubricate the cutting edges reducing that friction and subsequent damaging heat) and M42 is the highest grade of cobalt bits I have & that I know of / have used. You buy titanium bits from M7 (high molybdenum for toughness) to M35 (HSS with a 5% titanium component) or the king of titanium bits and heat dissipation (HSS with 8% titanium) so your bits won't be damaged to the point they're unable to be used again. These high end bits you pay for ones made right. There are proper recipies the boundaries mix up molten of all the components from the iron and nickel of base steel, to adding molybdenum for toughness, cobalt for thermal resilience, titanium coatings to reduce friction, and many many more components in a bakery for steel. These bits are beyond poorly made and are NOT good moreless decent bits. So I'll reiterate fro my own and others experience, THESE ARE JUNK AND YOU DONT "NEED" THEM.....well unless you need to drill holes in pure Gallium at ambient temperatures above 30°C. And just a FYI I have 1/8" M42 aircraft legnth bits that'll drill through a 10" hardened steel block and a 1.0" M42 bit that could just about drill aluminum foil without tearing it. Size has nothing to do with quality. Small bits for small sheets and big bits for big sheets is a cop out answer to make the customer think they're the problem in how they're using the bits. The bits are crap and the Seller sends different answers to different people. They're garbage bits from cheap garbage metal (I hesitate to even call them true steel) see less
Question:	Are these bits titanium or cobalt? The product description shows both titanium & cobalt
Answer:	You don't "need" any of these bits. Both, my...another family member and I purchased these as the touting of cobalt, titanium, and High Speed Steel bits made us both believe they were a steal of a steel deal. Boy we couldn't have been more wrong! These are absolute garbage. AGAIN THESE ARE ABSOLUTE GARBAGE BITS. I've got a free pocket knife from a gas station that drills better. Shavings from the first time we used these bits were put in the MassSpec at his showed NO cobalt at all present. For those that don't know a mass spectrometer gives you a breakdown of the molecules and elements present in a sample. Upon my complaining to the seller, I was told well.... "They're only cobalt colored and aren't intended for use on steel or hard metal alloys." You buy a cobalt %containing bits to handle the higher frictional heats encounters when cutting/drilling tougher steel alloys, stainless, or even just wanting your High Speed Steel bits to last longer. It's so your bit doesn't take damage and be destroyed or worse yet damage the piece you're drilling (especially when you're using tapping fluid too to lubricate the cutting edges reducing that friction and subsequent damaging heat) and M42 is the highest grade of cobalt bits I have & that I know of / have used. You buy titanium bits from M7 (high molybdenum for toughness) to M35 (HSS with a 5% titanium component) or the king of titanium bits and heat dissipation (HSS with 8% titanium) so your bits won't be damaged to the point they're unable to be used again. These high end bits you pay for ones made right. There are proper recipies the boundaries mix up molten of all the components from the iron and nickel of base steel, to adding molybdenum for toughness, cobalt for thermal resilience, titanium coatings to reduce friction, and many many more components in a bakery for steel. These bits are beyond poorly made and are NOT good moreless decent bits. So I'll reiterate fro my own and others experience, THESE ARE JUNK AND YOU DONT "NEED" THEM.....well unless you need to drill holes in pure Gallium at ambient temperatures above 30°C. And just a FYI I have 1/8" M42 aircraft legnth bits that'll drill through a 10" hardened steel block and a 1.0" M42 bit that could just about drill aluminum foil without tearing it. Size has nothing to do with quality. Small bits for small sheets and big bits for big sheets is a cop out answer to make the customer think they're the problem in how they're using the bits. The bits are crap and the Seller sends different answers to different people. They're garbage bits from cheap garbage metal (I hesitate to even call them true steel)
Question:	Noob question, but why do I need five of these bits? It seems like you could get all the increments with one or two
Answer:	It will definitely cut aluminum...its I deal for porting a cylinder head...

Product features

Advantages of HSS Step Drill Bits

Product description

SHOCKWAVE DRILL & DRIVE SET 40PC . Milwaukee Electric Tool 48-32-4006 40PC Shockwave Bit Set features a Geometric design that Provides Shock absorption, Proprietary Steel and Heat Treat Process For Maximum Strength and Durability, Forged Tips For Maximum Grip, Set Includes: 1 Insert 1/2" Socket adapter, One 1/4" Magnetic Nut Driver, One 1/4" Shockwave Hex Drive Bit, One 1/8" Drill Bit, One 3/16" Shockwave Hex Drive Bit, One 3/8" Magnetic Nut Driver, One 3/8" Socket adapter, One 5/16" Magnetic Nut Driver, 1 Shockwave Compact Magnetic Bit Holder, 1 Hex Bit 1" 1/4", 1 Hex Bit 1" 1/8", 1 Hex Bit 1" 3/16", 1 Hex Bit 1" 5/32", 1 Phillips Bit 1" P1, 2 Phillips Bit 1" P2, 1 Phillips Bit 1" P3, 4 Phillips Bit 2" P2, 1 Phillips Bit 2" P3, 1 Phillips Reduced 1" PR2 Bit, 1 Slotted 1" #10 Bit, 1 Slotted 1" #8 Bit, 1 Slotted 2" #10 Bit, 1 Square Bit 1"SQ1, 2 Square Bit 1" SQ2, 1 Square Bit 1" SQ3, 1 Square Bit 2" SQ2, 1 Square Bit 2" SQ3, 1 Torx Bit 1"T15, 1 Torx Bit 1" T20, 2 Torx Bit 1" T25, 1 Torx Bit 2" T20 and 2 Torx Bit 2" T25. Product Description

• Geometric design provides the shock absorption
• Forged tips for maximum grip
• Proprietary steel and heat treated process for maximum strength and durability

User questions & answers

Question:	Will these work on my M18 fuel hammer drill
Answer:	This is probably the best blade on the retail market. It's made to cut porcelain (which is much harder than marble) and will handle marble or granite no problem.
Question:	Can I use the drill bit with hammer drill for drilling into concrete
Answer:	5/8”. Standard arbor. Haven’t seen any other size advertised.
Question:	what are the torque ratings for the 3/8 and 1/2 inch adapters
Answer:	Yes I have, Cuts like butter. Brick pavers are not as dense as a material like porcelain just thicker. You won't win any speed races but it gets the job done very well. Still needs to be on a wet saw though.
Question:	Are these accessories compatible with M12 tools
Answer:	It will with a glass blade on it.

• ✒ 208 Piece Screwdriver Bit Set - includes Phillips, Slotted flat, Square, Pozi drive, Nut driver, Spanner, Torq, Tri-wing, Torx star, Hex Head, Tamper proof Torx star, in a variety of sizes for total coverage. And extension bits, quick release and storage box.
• ✒ Superior Quality - Security bits made of high-grade carbon alloy steel (CR-V) for ultimate strength and longevity. Each bits has size and model for quick identification.
• ✒ Applicable With Various Tools - Includes magnetic extension bit holder and quick release. Can be used for manual electric screwdriver, screwdriver, drill, air and other tools.
• ✒ Professional Packaging - Come with Heavy-duty 9.05 x 1.59 x 11.61 inch plastic blow-molded Box, easily for you to store the screwdriver bits set , Labeled bit slots help keep your tools organized.
• ✒ Perfect Gift - Professional 208pcs Precision Screwdriver Set is family essential tools. Great gift for Father's Day, a new house, apartment, dorm, workshop or for the practical people on your list.

User questions & answers

Question:	Work with a 1/4" socket wrench
Answer:	The length is two inches>
Question:	Never received the package
Answer:	No. But I use them on impact. Have not broke any yet. Very strong
Question:	Will these fit a wheeler fat torque screwdriver
Answer:	Nowhere on the package or bits is a country of manufacture. Highly unlikely they are American made, probably Chinese at the best.
Question:	What are the dimensions of the box when it is open
Answer:	Yes, it will work with any 3/8 or 1/2 drill chuck....

Product features

Multi Bit - 47PCS

2.5in:

H2.5-3-4-5-6, T10-15-20-25-27-30-40, PZ1-2-3,PH1-2-3

1.97in:

H2-3-4-5-6, T10-15-20-25-27-30-40, PH1-2-3, PZ1-2-3, Triwing1-2-3-4, Torq_set6-8-10, Spanner4-6-8-10

Multi Bit - 20PCS

20PC 38MM Nut driver

4-5-6-7-8-9-10-11-12-13CM,

5/32,3/16,1/4,9/32,5/16,11/32,3/8,7/16,15/32,1/2

Multi Bit - 141PCS

PH0*3,PH1*3,PH2*6,PH3*3, PZ0*3,PZ1*3,PZ2*6,PZ3*3, T8*2,T10*2,T15*2,T20*2,T25*2,T27*2,T30*2,T35*2,T40*2,

SL2*3,SL2.5*3,SL3*6,SL4*6,SL4.5*2,SL5*5,SL5.5*1,SL6*4,SL6.5*2,SL7*3,

T8,T10,T15,T20*3,T25*3,T27*2,T30*3,T35*3,T40, H2,2.5,H3*2,H4*3,H5*3,H5.5*1,H6*1, S0-1-2-3, Triwing1-2-3-4,Spanner 4-6-8-10,C1,C2, H5/64*2, H3/32*2, H5/32*2, H7/64*2, H1/8*2, H9/64*2

1PC 65MM extension bits

1PC quick release