14 best bit set with cases

Product description

The DEWALT DW2166 45-piece screw-driving set with tough case includes the most commonly used screwdriver accessories. It has Philips, square, slotted and double-ended screwdriver bits. The industrial-strength case they come in is durable and provides organization, portability and protection of the bits. The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. The industrial-strength case is strong and durable. The set includes Phillips, square, slotted, and double-ended bits.

From the Manufacturer

The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. The industrial-strength case is strong and durable. The set includes Phillips, square, slotted, and double-ended bits.

• Value: Dollar 40 value vs. purchasing separately
• Bit retention: Tough case container bit retention system keeps bits secure
• Magnetic drive guide: Magnetic drive guide reduces stripping and wobbling
• Bit fit: Includes 12 double ended bits
• Bit tip count: 54 total tips. Clip latch for secure closing
• Steel bits: Hardened steel screwdriver bits
• Durable case: Comes in a strong and durable case

User questions & answers

Question:	Are these strong enough to not strip after being used multiple times? I feel mine always do with just a few uses
Answer:	They are hardened steel. I've used mine on some screws with stripped heads (which would have chewed up the bit if it hadn't been hardened steel). They are hardened and they don't get chewed up. I've had no issues with mine.
Question:	Do u have to have a drill
Answer:	You could probably put it in a Yankee but the drill would be much more up to date.
Question:	Will the bits fit your standard electric drill? My drill is nit a DeWalt brand. Thank you
Answer:	Yes, they will BUT, these aren't really designed for use in an electric drill, these are designed for use in 1/4" hex bit screwdrivers primarily.
Question:	What's the trick in getting these bits back into their plastic holding place? It seems to only bend the plastic
Answer:	Contrary to some answers, the case is very well designed and there is a very simple way of getting the bits back into the case. All you have to do is turn the bit with the flat sides to either side (pointy side to the front , back) then slide it down into the empty slotted area; there should be no resistance if done correctly. The simply push the bits back down seating it into the holder. It's as simple as that.

Product features

DEWALT DW2166 45-Piece Screwdriving Set With Tough Case

The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. It has Philips, square, slotted and double-ended bits. The industrial-strength case they come in is durable and provides organization, portability and protection of the bits.

Product description

Daredevil spade bits are designed for professional users seeking speed, ease of use and hole quality. A full-cone threaded tip pulls the bit through the material with less effort and vibration than other spade bits. The contoured paddle delivers faster chip removal; hex shank with power groove reduces slippage. Up to 10X faster than conventional spade bits.

• Features a Full-Cone Threaded Tip for Fast and Effortless Drilling
• Contoured paddle for fast chip removal
• Hex shank power groove to reduce slippage
• Spur and reamer tips for cleaner holes
• Provides a cleaner hole quality with reduced breakout
• Features a full cone-threaded tip for fast and effortless drilling
• Contoured paddle for fast chip removal

User questions & answers

Question:	Can these drill through a 2x4 against a 4x4 (through 5" of wood
Answer:	Yes, I've used them to drill 6x6 (5-1/2") just clear chips couple times or bit may jam chips stuck behind bit.
Question:	Will these work to drill holes in tree stumps, prior to filling with KNO
Answer:	Thank you for your question. The DSB5013P will work great for drilling into wood. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	Are these drills considered "stubby". How long are the shanks
Answer:	Thank you for your question. The DSB5013P has a 6" overall length for each bit. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	How do these do in live trees
Answer:	Thank you for your question. The Daredevil spade bits will work in a live tree, the tip is aggressive to pull the bit into the wood. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)

Product features

Powerful, Effortless Drilling

The threaded tips of the Bits of the Daredevil Spade Bit Set ensures a faster drill. What makes the drilling even smoother is the Speedwave Paddle Design of the Bit that simultaneously removes the chip to prevent jamming.

Spur and Reamer tips ensure clean work

The Paddle Body of the Bit is embedded with a Spur and Reamer tip on the top edge that makes clean holes. This is made possible by an obstructed, smooth entry into the surface of the wood. Additionally, the angled cutting edges also minimizes blow-outs.

Perfect for Professionals, compatible with various drills

The Bits from Bosch Daredevil Spade Bit Set features a 1/4 in. hex shank that fits a wide range of drills. If you are a professional and have different kinds of impact drivers as well as drill/drivers, you don’t have to invest on different kinds of Bits, if you have this as it. It also features a power groove to improve bit grip and reduce slippage.

Works on variety of materials

The Bosch Daredevil Bits are made to easily drill through various surfaces such as Wood and treated Lumber.

Product description

DEWALT's titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications. Includes sizes from 1/6 inch to 1/2 inch in a plastic tough case.

• Titanium pilot point for longer bit life
• Starts on contact for cleaner holes
• No spin shanks. Clip latch for secure closing
• Tapered web provides greater durability to reduce breaking
• Includes sizes from 1/16 inch to 1/2 inch in a plastic tough case

User questions & answers

Question:	can the bits be used on metal and wood
Answer:	Yes they can be used on both metal and wood, but depends on what kind of metal. The description says that they provide longer life when used with "non-ferrous" (non-magnetic) metals (such as aluminum). The bits would wear out fairly quickly if used on other types of metals.
Question:	Can these be used to drill in concrete
Answer:	Not a concrete drill. Not much of a drill at all from the couple of times I have used these. Drill one hole and the tip is GONE! Terrible product.
Question:	would using cutting fluid for drilling into
Answer:	When drilling into metal especially thick metal. Cutting oil is always recommended. Unless you have several drill bits to ruin laying around.
Question:	are these hex shank bits
Answer:	Of the 4 sets in this kit, 3 sets are hex shank. DEWALT DWA2FTS100 Screwdriving and Drilling Set, 100 Piece AMZN reuses questions and answers on similar items.

Product description

COMOWARE Screwdriver Bits Set with Titanium Drill Bits - S2 Alloy Steel with Tough Case, 35 Piece 

Material: Industrial S2 Alloy Steel

Drill Bits: Titanium Coating

Shank Type: 1/4 Hex Shank

Size: 

25mm Screwdriver Bit: T10, T15, T20, T25, SL4, SL5, SL6, S2*7, PH2*7.

50mm Screwdriver Bit: PH1, PH2*2, PH3, S1, S2, S3.

Titanium Drill Bit: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16.

Package: Tough Index Plastic Box

• 【Industrial Grade S2 Alloy Steel】 - Our drill bits are made of high quality S2 Alloy Steel in sand blasted finish, with high hardness, high hardness, good wear resistance, which is also resistant to rust. Drill Bits are classic HSS construction with titanium coating for capability and durability. 
• 【Hex Shank & Quick Change】: Hex shank fit quick-change and lock firmly in standard chucks, suitable for any drill, driver, screw-gun, etc. Great for the DIY, household maintenance, and most general repairs.
• 【Complete Specifications】A complete set of screwdriver bits and titanium drill bits which is most commonly used. Anytime ready to satisfy your different needs.
• 【Wide Applications】Our drill bits set can be widely used on electric screwdrivers, hand screwdrivers, cordless drills, electric drills, air drills and so on. The bits are also impact-rated and for use in ¼” hex impact drivers (sold separately).
• 【HSS-Ground Titanium Coating】Classic HSS construction with titanium coating to sustain long life. The cutting edge is hardened and honed for drilling accurate and clean holes in metal, wood and plastic, Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel.

User questions & answers

Question:	Are these bits magnetic
Answer:	These bits themselves are not magnetic. But the extension bits holder is made of Neodymium magnet, has very strong magnetism (2 times more than others) that will deliver it to bits, the screws will be held tightly, invoid a sudden drop during use.
Question:	Are all the bits in this kit of a 1/4 hex shank? I am looking to use them with an electric screwdriver
Answer:	yes they are. I have used with my electric and battery powered screwdriver I can change bits any time fast.
Question:	Is it compatible with worx wx176l switchdriver
Answer:	Not familiar with the drive size of a Worx but would strongly suspect it is compatible since I have never experienced any tool that uses a different drive size. I believe 99% of driver inserts are this same size. That said, this is a great product that covers all types of screws.
Question:	Is there a holder for all the short bits , as in the pictures
Answer:	The case is the holder. You pop out the bit and put it back in when you finish. An extender from an unrelated kit is helpful for the short bits but quite useable as they are. I was impressed by this kit as the drill bits look really solid. Also the price I paid was quite reasonable.

Product features

COMOWARE Drill Bit Set and Screwdriver Bit Set

The set including：

50mm Screwdriver:

PH1, PH2*2, PH3, S1, S2, S3; 25mm

Screwdriver:

S2*7 , PH2*7, T10, T15, T20, T25, SL4, SL5, SL6;

Hex shank drill bit:

7pcs(5/64，5/32，3/16，9/64，1/8，7/64，3/32); total 35 pieces.

Product description

• Set of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
• Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials
• Gold oxide finish lubricates the drill bit and provides wear resistance
• Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
• Meets ANSI specifications

User questions & answers

Question:	What is the overall length of the longest bit
Answer:	The 1/2" bit I got was 6 1/16" long. 3/8" was 5 1/16" long, 1/4" was 4 1/16" long, 1/8" was 2 3/4" long. 1/16" was 1 3/4" long.
Question:	Where are these bits made
Answer:	I peeled off the applied foil stickers and took the plastic case apart, but could not find any clue as to the manufacturing country. However, they have been completely satisfactory in use.
Question:	Are these bits made in the USA
Answer:	For all who are asking , Drill America is a USA manufacturer. These bits are AMERICAN made.
Question:	Are these made in the USA??? or China
Answer:	No indication anywhere on the case. I looked at every bit and nearly all only had HSS CO and the bit size. The 31/64 has USA.

Product features

All The Bits You Need

29 Piece Sets includes fractional sizes from 1/16" to 1/2" by 1/64" increments.

Hang for Quick Access

When all hands are on deck, hang the drill index on your belt whether you're in the shop or field.

Easy to Handle Plastic Case

Unique round drill index combines form and function into one beautifully designed, easy to carry drill set.

Fits Anywhere You Need It

Effortlessly grip the set in one hand as you would a travel coffee mug or leave it in the cup holder of your truck while on the way to a job.

135 Degree Split Point Tip

Drill America Cobalt Drill Bits have a 135 degree split point tip for self-centering and reducing thrust. Compared to a conventional 118 degree tip, these drills wont go "walking" on you.

• Cobalt high speed steel along with the titanium coating ensures extreme durability, will stay new and shiny for years to come.
• Different sized shanks ensure compatibility with 1/4, 3/8 and 1/2 in. chuck sizes.
• Non-walking drill tip provides fast and smooth drills on steel sheets, aluminum sheets, wood board, plastic board etc. (the board must be smaller in thickness than the height of step drill bits).
• Please mark the spot that you are to drill for easier drilling and improved drill bits life.
• All the bits come in a well-organized case for easy transport and storage.

User questions & answers

Question:	How good is the quality
Answer:	This is a set of 5 drill bits. You can use either 3/8 or 1/2 drill with the drill bits included.
Question:	Is this for a 3/8 drill or
Answer:	You don't "need" any of these bits. Both, my...another family member and I purchased these as the touting of cobalt, titanium, and High Speed Steel bits made us both believe they were a steal of a steel deal. Boy we couldn't have been more wrong! Destroyed 1st use at slow speed off the speed chart and using tapping fluid to lubricate. These are absolute garbage. AGAIN THESE ARE ABSOLUTE GARBAGE BITS. I've got a free pocket knife from a gas station that drills better. Shavings from the first time we used these bits were put in the MassSpec at his showed NO cobalt at all present. For those that don't know a mass spectrometer gives you a breakdown of the molecules and elements present in a sample. Upon my complaining to the seller, I was told well.... "They're only cobalt colored and aren't intended for use on steel or hard metal alloys." You buy a cobalt %containing bits to handle the higher frictional heats encounters when cutting/drilling tougher steel alloys, stainless, or even just wanting your High Speed Steel bits to last longer. It's so your bit doesn't take damage and be destroyed or worse yet damage the piece you're drilling (especially when you're using tapping fluid too to lubricate the cutting edges reducing that friction and subsequent damaging heat) and M42 is the highest grade of cobalt bits I have & that I know of / have used. You buy titanium bits from M7 (high molybdenum for toughness) to M35 (HSS with a 5% titanium component) or the king of titanium bits and heat dissipation (HSS with 8% titanium) so your bits won't be damaged to the point they're unable to be used again. These high end bits you pay for ones made right. There are proper recipies the boundaries mix up molten of all the components from the iron and nickel of base steel, to adding molybdenum for toughness, cobalt for thermal resilience, titanium coatings to reduce friction, and many many more components in a bakery for steel. These bits are beyond poorly made and are NOT good moreless decent bits. So I'll reiterate fro my own and others experience, THESE ARE JUNK AND YOU DONT "NEED" THEM.....well unless you need to drill holes in pure Gallium at ambient temperatures above 30°C. And just a FYI I have 1/8" M42 aircraft legnth bits that'll drill through a 10" hardened steel block and a 1.0" M42 bit that could just about drill aluminum foil without tearing it. Size has nothing to do with quality. Small bits for small sheets and big bits for big sheets is a cop out answer to make the customer think they're the problem in how they're using the bits. The bits are crap and the Seller sends different answers to different people. They're garbage bits from cheap garbage metal (I hesitate to even call them true steel) see less
Question:	Are these bits titanium or cobalt? The product description shows both titanium & cobalt
Answer:	You don't "need" any of these bits. Both, my...another family member and I purchased these as the touting of cobalt, titanium, and High Speed Steel bits made us both believe they were a steal of a steel deal. Boy we couldn't have been more wrong! These are absolute garbage. AGAIN THESE ARE ABSOLUTE GARBAGE BITS. I've got a free pocket knife from a gas station that drills better. Shavings from the first time we used these bits were put in the MassSpec at his showed NO cobalt at all present. For those that don't know a mass spectrometer gives you a breakdown of the molecules and elements present in a sample. Upon my complaining to the seller, I was told well.... "They're only cobalt colored and aren't intended for use on steel or hard metal alloys." You buy a cobalt %containing bits to handle the higher frictional heats encounters when cutting/drilling tougher steel alloys, stainless, or even just wanting your High Speed Steel bits to last longer. It's so your bit doesn't take damage and be destroyed or worse yet damage the piece you're drilling (especially when you're using tapping fluid too to lubricate the cutting edges reducing that friction and subsequent damaging heat) and M42 is the highest grade of cobalt bits I have & that I know of / have used. You buy titanium bits from M7 (high molybdenum for toughness) to M35 (HSS with a 5% titanium component) or the king of titanium bits and heat dissipation (HSS with 8% titanium) so your bits won't be damaged to the point they're unable to be used again. These high end bits you pay for ones made right. There are proper recipies the boundaries mix up molten of all the components from the iron and nickel of base steel, to adding molybdenum for toughness, cobalt for thermal resilience, titanium coatings to reduce friction, and many many more components in a bakery for steel. These bits are beyond poorly made and are NOT good moreless decent bits. So I'll reiterate fro my own and others experience, THESE ARE JUNK AND YOU DONT "NEED" THEM.....well unless you need to drill holes in pure Gallium at ambient temperatures above 30°C. And just a FYI I have 1/8" M42 aircraft legnth bits that'll drill through a 10" hardened steel block and a 1.0" M42 bit that could just about drill aluminum foil without tearing it. Size has nothing to do with quality. Small bits for small sheets and big bits for big sheets is a cop out answer to make the customer think they're the problem in how they're using the bits. The bits are crap and the Seller sends different answers to different people. They're garbage bits from cheap garbage metal (I hesitate to even call them true steel)
Question:	Noob question, but why do I need five of these bits? It seems like you could get all the increments with one or two
Answer:	It will definitely cut aluminum...its I deal for porting a cylinder head...

Product features

Advantages of HSS Step Drill Bits

Product description

The BLACK & DECKER BDA91109 109pc Combination Accessory Set contains the ideal sizes of components for frequent use projects and installation. It offers a variety of drill bits for the most common uses with wood, metal, plastic and masonry. Along with the drill bits, it also contains a variety of 2-Inch and 1-Inch screwdriving bits for household projects. This convenient kit also comes with a durable, portable hard case with extra storage.

• Variety of Drill Bits for wood, metal, plastic and masonry
• Variety of 1-Inch and 2-Inch screw driving bits
• Portable hard storage case
• Ideal size of components for all types of projects
• Variety of Drill Bits for wood, metal, plastic and masonry
• Variety of 1-Inch and 2-Inch screwdriving bits
• Portable hard storage case
• Ideal size of components for all types of projects

User questions & answers

Question:	does it have 3/8 inch drill bit
Answer:	Yes, as well as 5/16, 1/4, 3/16 and 1/8 + 26 other drill bits all the way down to 1/16. Fantastic set.
Question:	Does this fit makita drill
Answer:	These bits (etc.) will fit any screw/drill driver.
Question:	does this fit the Black & Decker BDCD220IA 20-volt Max Drill/Driver and Impact Driver with 2-Battery
Answer:	These fit any standard interchangeable Bit drills. Most all drills have a bit holder capable of being adjusted to fit bits and these are all standardized universal.
Question:	do these bits have the hex base, to go in a drill/driver
Answer:	I concur with Informed Buyer. The drill bits are smooth cylinder base and the screw bits are hex base. There are customer pictures you can view to verify this. Please advise. (Side note) I bought this in 2013 for 24$, it's on sale as of right now for 18$.

Product features

Features + Benefits

• Variety of drill bits for use in wood, metal, plastic and masonry
• Ideal sizes of components for frequent use projects and installation
• Variety of 2" and 1" screwdriving bits for household projects
• Durable, portable hard case with extra storage

Product description

DEWALT's titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications. The speed tip design reduces walking on start, and the no spin keeps the bit secure in the drill. Includes 14 bits sized from 1/16 to 1/2-Inch in a plastic tough case.

• Speed Tip Reduces Walking
• Ideal for drilling in metal, wood, and plastics
• No spin shanks
• Includes tough case container to keep bits organized
• Titanium Coating for Longer Life

User questions & answers

Question:	will it work for cement or brick
Answer:	No they are not specified for concrete.
Question:	where are these made
Answer:	Was going to purchase these until I found out they were made in China. Just searched, “made in USA drill bits” and I found some awesome ones! If these companies won’t make their products here, its up to us consumers to buy American. Haven’t we learned by now? Always add made in usa to any search.
Question:	is there a 1/4 inch drill bit included in this set
Answer:	Yes, this set includes a 1/4" bit.
Question:	This 3 flat sides design, is it compatible with hex type of attachment? I am assuming yes, but wanted to make sure
Answer:	Yes, the drill bits are 1/4" Hex shank

Product description

DEWALT's titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications. The speed tip design reduces walking on start, and the no spin keeps the bit secure in the drill. Includes 21 bits sized from 1/16 to 1/2-Inch in a plastic tough case.

• Speed Tip Reduces Walking
• Ideal for drilling in metal, wood, and plastics
• No spin shanks
• Includes tough case container to keep bits organized
• Titanium Coating for Longer Life
• Bit case may differ from what is shown

User questions & answers

Question:	My drill has a hard time clamping down on the small diameter of the drill bits. What do I use to fix
Answer:	I have a drill with a chuck key and you can get a good grip. The hand tightening chucks don’t work as well
Question:	Can you drill into concrete slab with these bits
Answer:	No you need concrete bits
Question:	Do these work on Black and Decker impact driver as well
Answer:	Any drill chuck it does not work on impact driver but they do make them I have both.
Question:	whats the difference with these and the black oxide set? which is better
Answer:	Titanium bits will work for metal drilling whereas Black Oxide sets are recommend for only wood or plastic.

Product features

DEWALT DW1342

Speed Tip Reduces Walking

Ideal for drilling in metal, wood, and plastics

No spin shanks

Includes tough case container to keep bits organized

Titanium Coating for Longer Life

Product description

Specifications:

Material: HSS M35 Cobalt 5%

Angle Point: 135 Degree

Flute Type: Spiral

Shank Type: Straight Shank

 

All woodworkers need this set. 115 pieces are included for you to choose the most appropriate one, and it comes in a portable case. And all drills can be used for cutting metal, plastic, wood, etc. HSS M35 with 5% Cobalt provides ultimate higher heat and abrasive resistance which ensures a longer service life. 

• 115 PIECES INCLUDED: 29pcs Fractional Size:1/16” to 1/2” in 1/64th increments; 26pcs Letter Size: A To Z; 60pcs Numbered Size: #1 To #60.
• HSS WITH 5% COBALT: Durable, Higher Heat & Abrasion Resistance.
• PRECISE 135° SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster.
• PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
• ORGANIZED HOLDER: Set includes the drill bit holder with size index for easy storage and organizing.

User questions & answers

Question:	if these are not really meant for, let's say hanging blinds on a steel/metal door, what should I use
Answer:	You can, but you would need cutting oil!
Question:	What is the warranty on this Comoware cobalt 15pc drillbit set
Answer:	“Satisfaction guaranteed” or contact company, the company most likely will give you the run around
Question:	Does it work for stripped hex screws
Answer:	Have not tried on Hex heads, but should work fine. Should not have to use the drilling action, just the extraction.
Question:	How well do these cut through stainless steel. More specifically 3/8 inch thick stainless steel support beams
Answer:	Use a little lubricant and it'll drill like butter. I used these to drill a bunch of holes in 1/4 stainless with no problem whatsoever. Great bits

Product features

COMOWARE Cobalt Twist Drill Bit Set-115 Pcs

Specifications:

Material: HSS M35 Cobalt 5%

Angle Point: 135 Degree

Flute Type: Spiral

Shank Type: Straight Shank

Size Included:

29pcs Fractional Size:1/16” to 1/2” in 1/64th increments; 26pcs Letter Size: A To Z; 60pcs Numbered Size: #1 To #60.

M35 Cobalt HSS:

It is more suitable for hardened material,such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.

Product description

The 32-piece set work with the home, mechanics, DIY projects, garage and more. With extra long 6-inch bits, it's easier to get into deep hard-to-reach places. Each security bit is heat-treated and made from durable S2 steel. Set includes: Torx Tamper: TT8, TT10, TT15, TT20, TT25, TT27, TT30, TT35, TT40, Hex Tamper: 2, 2. 5, 3, 4, 5, 6mm; Tri-Wing: #1, #2, #3, #4; Spanner: 4, 6, 8, 10 mm; Torx bit: 6, 8, 10mm; Pozidriv: PZ1, PZ2, PZ3; Philips: #1, #2; Slot: 6mm. Comes complete with blow mold case.

• Includes uncommon bits that will loosen tamper-proof security bits that cannot be unscrewed by regular screwdrivers
• All security bits are made to last with S2 Steel construction; suitable for industrial use and with hand, air, or power tools
• 6-inch length is ideal for working with electronic appliances
• Comes organized in a compact hard plastic storage case for easy transportation
• Fits universal 1/4 inch hex shanks and set includes: 9 Torx Tamper: T8, T10, T15, T20, T25, T27, T30, T35, T40, 6 Hex Tamper: 2, 2.5, 3, 4, 5, 6 mm, 4 Tri-Wing: #1, #2, #3, #4, 4 Spanner: 4, 6, 8, 10 mm, 3 Torque Bit: 6, 8, 10 mm, 3 Pozi Drive: PZ1, PZ2, PZ3, 2 Philips: #1, #2, 1 Slotted: 6 mm

User questions & answers

Question:	Where are they made
Answer:	According to Reference.com - https://www.reference.com/world-view/neiko-tools-527eca2371b4a409 "Neiko tools are made by Neiko Tools in Taiwan and China. The brand Neiko Tools USA is manufactured by the same company in Taiwan and China. However, the Neiko Tools USA brand is only available in the United States."
Question:	Can someone please list all the sizes
Answer:	From the description on Amazon's page - perhaps the sizes were not specified 4 YEARS ago and perhaps the question needs to be removed … Jerry? Fits universal 1/4 inch hex shanks and set includes: 9 Torx Tamper: T8, T10, T15, T20, T25, T27, T30, T35, T40, 6 Hex Tamper: 2, 2.5, 3, 4, 5, 6 mm, 4 Tri-Wing: #1, #2, #3, #4, 4 Spanner: 4, 6, 8, 10 mm, 3 Torque Bit: 6, 8, 10 mm, 3 Pozi Drive: PZ1, PZ2, PZ3, 2 Philips: #1, #2, 1 Slotted: 6 mm
Question:	How are these with impact drill drivers such as the Milwaukee
Answer:	I use them all the time with a 10.2v makita 1/4 inch impact and no problems
Question:	Do these have quick release shanks
Answer:	Yes, quick release 1/4 inch hex. Nice product.

Product features

Quality You Can Trust

Includes uncommon bits and tamper proof security bits with perfectly centered holes for extreme accuracy.

Heavy Duty Construction

Bits are made with S2 steel for ultimate durability that withstand throughout multiple uses in regular and even industrial settings.

Extra Length

Each bit measures in at 6 inches long and is ideal to be used with electronic appliances.

Stay Organized

All bits come neatly organized in a stand up organizer. Discreet design allows you to store it away with minimal space while not in use.

Great for Power Tools

Not only can you use the bits on hand tools, you can easily insert them to any 1/4" hex shank power drill to use.

Product description

Quick Change 5 Piece Countersink Drill Bit Set by Snappy. Combination countersink and/or counter bore for standard wood plugs with standard hex shank will fit all power bit quick change chucks. Made of alloy steel & thru hardened with a 82 degree countersink angle. The drill bits are adjustable for different length screws with a 3/8" or 1/2" diameter counter bore. Your drill will not slip when using large 1/4" socket head screws. Made in USA by Snappy.

• In one step, you can drill, countersink and counter bore the perfect sized hole for #4, #6, #8, #10, or #12 screws.
• Snappy Tools Countersinks will drill the pilot hole and countersink or counter-bore for screws in one step. Countersink to drive the head of the screw flush with or slightly below the surface
• Ideal for plugs or dowel buttons. The 1/4" hex shank can be used with power drills and quick-change chucks.
• Experience the higher quality of Snappy Tools. Combining higher quality materials and patented technology, Snappy delivers industrial quality tools to the tradesman and do-it-yourself markets at an affordable price.
• Made in USA by Snappy; Includes 5 Gold Screw Countersinks: 5/64x3/8, 3/32x3/8, 7/64x3/8, 1/8x3/8 & 9/64x1/2 and a belt clip pouch

User questions & answers

Question:	What is the best way to sharpen the countersinks? Could they be sharpened with the Drill Doctor
Answer:	I have never tried to sharpen them, but if I needed to I would remove the drill bit and use a very fine metal file or a honing stone.
Question:	How good is the stop collar at drilling a flush hole? One reviewer (oct 29, 2016) indicated that the collar was more for boring and not flush
Answer:	I see what you're saying now. No problem, you can set the collar so that you have a shallow v-shaped countersink with none of the vertical walled boring you'd want for a bung, so the top of a flat head screw willl sit perfectly flush with the surface.
Question:	Can you use these with an impact driver
Answer:	yes, I use them with an impact drive as well as a driver drill.
Question:	What angle do the countersinks cut
Answer:	The same with common countersunk screw i.e 82° countersink angle cut

Product description

DEWALT Masonry drill bit set, Percussion, 7-Piece (Dw5207)

An excellent accessory for your cordless hammer drill, this DEWALT seven piece drill bit set provides function and durability for all your rugged drilling needs. Applications include drilling nice, neat holes into masonry, concrete, rock, and artificial stone. Crafted for the average 3/8-inch and 1/2-inch sized chuck, the bits in this set are intended to make holes for mechanical anchors. The set includes the following pieces: 3/16-inch by 3, 1/4-inch by 4, 5/16-inch by 6, 3/8-inch by 6, 1/2-inch by 6 and two 1/4-inch by 6s.

• The product is 7PC MAS Drill Bit Set
• Easy to use
• The product is manufactured in Germany
• Rock carbide tip maximizes carbide surface contact for longer bit life
• Four-flute design cleans debris out for fast, efficient drilling
• Three flats on shank eliminate bit slipping in chuck
• For use with electric or cordless hammerdrills
• Ideal for drilling holes in brick, block, concrete, and masonry

User questions & answers

Question:	I have a Dewalt set, one 1/4" high impact. Looking for Masonry bites that will fit my 1/4" high impact drill, Would this set do the job
Answer:	I dont know, however I think it is best used with a drill with a normal chuck....like a hammer drill...from my experience.
Question:	duh! how do i remove them without tearing pouch
Answer:	If you look closely at the top 1 inch, , you will notice there appears to be a second layer of plastic. From that point upwards towards the top, the yellow backing can be separated from the front clear packaging. Its very sticky but can be separated without tearing the pouch. I found it best to hold the top next to a corner with one hand and with the other hand hold the side at the same corner. Then wiggle the package back and forth and you'll see the separation start at the corner.
Question:	Has anyone used these to drill through ceramic tile? If so how did they work
Answer:	Use rotary motion only, no percussion! make a clay dam around the drill on the ceramic surface and fill it with water before drilling
Question:	work with regular drill
Answer:	Yes , drill down holding drill steady , pulling drill up to clear bit of cement powder from hole. Do several time until desired depth is achieved. Make sure tokeep drill steady so not to wobble hole out, so anchor will hold tight.

Product description

DEWALT DWA2T40IR 40 Piece Impact Ready Screw driving Set is part of the DEWALT Flexor line of power tool accessories. Flexor allows bits to flex up to 15 degrees which equals increased durability and reduced breakage for longer bit life. This set allows you to maximize you Impact ready system. It features a 10x Magnetic Screw Lock System for strong fastener retention and is preferred by professionals everywhere. The bits are placed directly in the impact driver; No run out and allows for access areas. It also minimizes drops and reduces wobbling. This set features a full range of sizes, from 2 inch to 6 inch screw driving bits and are removable to be used across a full bit set. These bits are durable and jobsite tough. Set includes: 3/8" Untested, 1/4" Untested, 5/16" Untested, Impact Ready Sleeve, 3" Impact Ready Screw Lock Holder, 2" PH2 Impact Ready Bits, 2" SQ2 Impact Ready Bit, 2" T25 Impact Ready Bit, 2" SL8 Impact Ready Bit, 1" PH2 Bits, 1" SL8 Impact Ready Bits, 1" SL6 Impact Ready Bit, 1" PH1 Impact Ready Bit, 1" PH3 Impact Ready Bit, 1" SL10 Impact Ready Bit, 1" PH2, 1" T15 Impact Ready Bit, 1" T20 Impact Ready Bit, 1" T25 Impact Ready Bit, 1" T30 Impact Ready Bit, 1" SQ2 Impact Ready Bits, 1" SQ3 Impact Ready Bit, 1" SQ1 Impact Ready Bit, 3.5" PH2 Impact Ready Bit.

• Minimizes drops
• Reduces wobbles & breakage
• FlexTorq allows bits to flex up to 15 degrees
• 10x magnetic screw lock system
• Minimizes drops and reduces wobbling
• Reduces breakage and longer life

User questions & answers

Question:	Can I use this with regular drill (not an impact driver
Answer:	YEP! In fact, I use the speed loader to make using my regular drill/driver faster. The Magnet holds the different bits I'm going between.
Question:	are the individual bits magnetic
Answer:	The individual bits are not magnetic. The 1/4' and 5/16" adapters, the bit extender, and of course the magnetic screw holder are. If you use any of these (except the 5/16" adapter) with the bits, then the bits will exhibit magnetic characteristics as well.
Question:	where is made
Answer:	Holder and socket adapter made in Taiwan. The rest is made in Vietnam.
Question:	This may sound really dumb, but how does one remove a bit from the magnetic holder that was in its own bubble, the "magnetic screw lock sleeve
Answer:	I just got mine today. That bit pulls out from the back. I had to wiggle it around quite a bit, and then it came out. It gets easier after you do it a few times. It took me a minute to figure out how to use it. The bits push in from the back, you only use the long bits. It only made sense once I put it in my screw gun. The sleeve slides back on the bit enough to expose the tip. Then you can put a screw on it, and the magnet/sleeve holds the screw in place. That's their theory at least lol. I haven't tried it yet. It seems a little awkward, but I guess you could get used to it if you're putting in a bunch of screws.

Product features

DEWALT DWA2T40IR Impact Ready FlexTorq Screw Driving Set, 40-Piece

Designed for tough jobsite duties, the Impact Ready bits deliver the power, precision and dependability required to handle even the toughest jobs. Complete with an assortment of various bit tips and sizes commonly used on the jobsite, this bit set is the ultimate resource for any handyman, professional or DIYer.