12 best saw blade for plasters

Product description

Makita 723060-A-5 6-Inch 6-TPI Drywall and Plaster Reciprocating Saw Blade

• Drywall, plaster , plastic from 5/16-to-4-Inch

User questions & answers

Question:	Is this a single blade or a pack of blades
Answer:	This toy nerf water has a water tank capacity of 20 ounces. it can shoot at a distance of 38 feet. I hope that helps

• Up to 30x longer lifetime with carbide teeth design
• A 'MUST HAVE' blade for tough cutting jobs on hard material
• Super endurance for hardened materials, e.g. hardened nails, metal cube, stainless steel and fiber glass
• Carbide teeth for high performance in metal and other materials
• Multi-Fit interface fits on most popular oscillating multi tools, two extra adapters in the package cover more tools than any other competitors on the market.

User questions & answers

Question:	will these fit correctly on a Sonicrafter f80 without an adapter
Answer:	Very thin kerf of .055
Question:	would this blade be good for cutting off rusted bolts on a car sway bar
Answer:	Yes it will fit your dewalt wet tile saw. The only thing I would check is the arbor size. The cyclone has a 5/8” arbor and I believe the dewalt is 5/8” too. If that’s the case your good to go.
Question:	will this fit black and decker
Answer:	It should. This fit on my 4” Ridgid grinder with no issues.
Question:	Is this product made in USA
Answer:	I cut 10mm tiles with it no problem should cut 20mm also.

Product features

EZARC Professional Carbide Oscillating Saw Blade Heavy Duty for Hard Materials

User Insight

Traditional HCS and Bi-Metal flush cut blade can only cut soft materials, teeth are easy to wear out when cutting hard material such as Hardened Nails, screw or reinforced fiberglass. Users are always complain the terrible lifetime of bi-metal blades on metal applications.

EZARC Solution

EZARC Carbide blade lasts 30 times longer versus a conventional bi-metal option in metal, the high performance carbide teeth allows you to cut through concrete nails, stainless steel, cement board, fiber glass, sheet metal, hardwood with ease.

Specification:

Teeth Material: Tungsten Carbide

Cutting Width: 1-3/8" (34mm)

Cutting Depth: 1-3/5" (40mm)

Accessories: B-Brand and D-Brand adapters

Up to 30x Longer Life Than Bi-Metal Blades

Thanks to the carbide technology, EZARC oscillating saw blades with carbide teeth can easily handle the toughest metal applications with 30 × life comparing with Bi-Metal blades.

Strong Teeth For Hardened Material

• Cutting hardened bolts, screws and nails;
• Cutting stainless steel, e.g. kitchen front cover;
• Cutting severely abrasive materials, e.g. fiberglass, plasterboard, cement board;
• Cutting small metal pipes or steel profiles;

Fits More Brands Oscillating Multitools

Universal quick release saw blades can be used on numerous oscillating tools .

2 extra adapters are included in the package to fit more multitools than any other brands on the market.

How to Choose the Right Oscillating Tool Blade for Your Job ?

Oscillating tools work by fast and brisk side-to-side movement. Given that there are multiple types of jobs and different teeth material, one might be at lost as to which blade to select. upper image shows how to choose oscillating tool blades for your different cutting demands.

Please Note:

Carbide blade is very great for hardened nails and bolts cutting, but it is not great for wood and soft metal cutting because of the flat teeth geometry design.

How to install the adapter for D-brand quick change oscillating multitools?

Important: Make sure the adapter inner edge locks on the side of the hold pin, don't put the adapter under the pin

How to install the adapter for D-brand quick change oscillating multitools?

Step1. Release the tool holder and insert the adapter between the holder and blade, make sure the adapter and holder center to center

How to install the adapter for D-brand quick change oscillating multitools?

Step 2: Turn the direction of the adapter to the revise side

How to install the adapter for D-brand quick change oscillating multitools?

Step3: Lock the holder, check the adapter position, make sure the adapter lock on the side of the holder

• EZARC oscillating saw blade with carbide teeth can easily handle the toughest metal applications with 30 × life vs Bi-Metal blades.
• Upgrade carbide laser welding technology with a slim body makes the blades extremely strong and durable for heavy duty nails cutting.
• Super endurance for hardened materials, e.g. stainless steel, hardened screws and nails, fiberglass and plasterboard boards, etc.
• The 'MUST HAVE' caribe oscillating multi tool blades are designed for tough cutting jobs on hard material.
• Our universal oscillating tool is suitable for professionals and DIYers. Two extra adapters fit most of the conventional oscillating tools on the market.

User questions & answers

Question:	do they fit Walmart Hyper Tough
Answer:	For removing grout you really need a blade specifically for grout - yes this will work for a short time, but will wear out very quickly, For grout, I recommend this one fron Bosch (you get what you pay for). https://smile.amazon.com/Bosch-OSL234HG-Starlock-Oscillating-Hybrid/dp/B01DDA81TK
Question:	would this blade be good for cutting off rusted bolts on a car sway bar
Answer:	EZARC oscillating multitool saw blades can fit all Dewalt Multi Tools include 20v cordless tool. Beside Dewalt, it can direct compatible with Makita, Milwaukee, Fein, Genesis, Ridgid, Craftsman, Rockwell, Black & Decker, Porter Cable, Worx, AEG, Ryobi, Bosch non-starlock(GOP 200 CE, GOP250 CE, GOP2000 CE, MX25E, GOP10.8V-Li, PS50, GMF10.8V-Li)
Question:	Would these work to remove grout
Answer:	The Rockwell 50 is a 4 amp motor the 30 is a 3.5 amp
Question:	Will this blade fit the 20v cordless Dewalt multi tool
Answer:	Use handle to tighten blade in whatever angle you need. If yo can pull blade out it is not seated correctly

Product features

EZARC Carbide Oscillating Tool Blades

As a leading supplier of oscillating tool blades, EZARC puts its faith in excellent quality and customer benefit, which is why it always visit end-users and develop new tools based on the user voice. The appropriate accessory is therefore avail- able for every application – be it sawing, routing, rasping, cutting, scraping, sanding or polishing, even in hard-to-reach areas.

Specification

Teeth Material: Carbide

Cutting Width: 1-3/8"(34mm)

Cutting Depth: 1-3/5"(40mm)

Strong teeth for hardened material

Thanks to the carbide technology, the EZARC oscillating saw blades with carbide teeth can easily handle the toughest metal applications with 30 × life comparing with Bi-Metal blades.

Up to 30x lifetime for hard material

Cutting hardened screws and nails

Cutting stainless steel (e.g. kitchen front cover)

Cutting severely abrasive materials, e.g. fiberglass, plasterboard

Fits more brands oscillating tools than any competitors on the market

EZARC universal oscillating tool is suitable for professionals and DIYers. Two extra adapters fit most of the conventional oscillating tools on the market.

How to install the adapter for D-brand quick change oscillating multitools?

Important: Make sure the adapter inner edge locks on the side of the hold pin, don't put the adapter under the pin.

How to install the adapter for D-brand quick change oscillating multitools?

Step1. Release the tool holder and insert the adapter between the holder and blade, make sure the adapter and holder center to center.

How to install the adapter for D-brand quick change oscillating multitools?

Step 2: Turn the direction of the adapter to the revise side.

How to install the adapter for D-brand quick change oscillating multitools?

Step3: Lock the holder, check the adapter position, make sure the adapter lock on the side of the holder.

Product description

Combination of 6 different types of saw blades can meet daily use needs, which will help you to accomplish your work better.

Made of excellent manufacturing technique and high quality material , Vtopmart saw blades can give you efficient cutting experience. A great selection of oscillating saw blades for cutting wood,plastics, soft metals ,bi metals and other materials. Universal quick release saw blades can be used on numerous oscillating tools. Package Includes: 3 Pack --- 1-3/4-Inch Wood/Plastic/Soft Metal saw blades 3 Pack --- 1-3/4-Inch Precision Wood and Plastic saw blades 3 Pack --- 1-3/4-Inch Bi-Metal saw blades 3 Pack --- 1-3/8-Inch Bi-Metal saw blades 4 Pack --- 1-3/8-Inch Wood/Plastic/Soft Metal saw blades 4 Pack --- 1-3/8-Inch Precision Wood and Plastic saw blades Fitment note: Blades in this listing are compatible with the following brands and models of oscillating multi-tools:Bosch Multi-X, Bosch (except MX30) , Craftsman Nextec Multi Tool, Craftsman Nextec 17438, Craftsman Nextec 61199, Craftsman Nextec 5910, Craftsman 2702 2.0 Amp, Chicago 67256, Chicago 67537, Chicago 67538, Chicago 67707, Chicago 68303, Cougar, DeWalt , Dremel Multi-Max (will not fit MM40 & MM45 models), Driving Force, EINHELL, Falke Tool Mate, Fein Multimaster Tools, Fein Multimaster AFMM 14, Fein Multimaster FMM 250 Q,Fein MultiMaster FMM 250 Q-MS, Fein MultiMaster MOX 6-25 Pneumatic, Ferm Zwolle Holland, Genesis Multi-Purpose, HARDIN AZ318-2 250W, Haussmann 5-in-1 Multi-Purpose Tool, Ideenshop, IIT, King Canada, LongActive, Mastercraft, Master Mechanic, Matrix, MEEC Tools, Millarco prof, Milwaukee, Ozito, Power Craft, Power Duro, Pro-Line, Ridgid Jobmax, Rockwell Sonicrafter Hyperlock.  

• Notice----Do not fit Fein Starlock，Bosch MX30(Bosch MX30EC-31), Bosch Quick Release tools ; Do not fit Fein Supercut
• Superior Value Oscillating Saw Blades kit--20 Pcs contain 6 different kinds of saw blades, for cutting wood, metal plastic and other materials, each type of saw blade is specific for a particular purpose. Our oscillating saw blades can meet a variety of needs, which could be used for workshop ,household or other place.
• Tougher and Thicker Than Most--Made of alloy steel and high carbon steel , our oscillating multitool blades are manufactured with special techniques and thick gauge metals due to which it becomes durable for a long period.
• Special Design for Precision cutting--Built-in length markers on two sides, one side is inch and other is centimeter, ensure you can get accurate cuts easy and fast while you working with it. 2 kinds of special design precision saw blades have longer wavy tooth that is specifically designed to provide faster, cleaner cuts in wood and plastic.
• Universal Compatible System--Our quick release saw blades are compatible with many oscillating tools in the market, such as Fein Multimaster, Ryobi, Milwaukee, Hitachi, Black & Decker, Chicago, Craftsman and More.

Product features

Package Includes: 20 Pcs Oscillating saw blades

3 Pack --- 1-3/8-Inch Bi-Metal saw blades

3 Pack --- 1-3/4-Inch Bi-Metal saw blades

3 Pack --- 1-3/4-Inch Precision Wood and Plastic saw blades

4 Pack --- 1-3/8-Inch Precision Wood and Plastic saw blades

3 Pack --- 1-3/4-Inch Wood/Plastic/Soft Metal saw blades

4 Pack --- 1-3/8-Inch Wood/Plastic/Soft Metal saw blades

Include 6 different types of saw blades

Combinatin of 6 different types of saw blades can meet daily use needs, which will help you to accomplish your work better.

Made of high quality material

Made of excellent manufacturing technique and high quality material, Vtopmart saw blades can give you efficient cutting experience.

Multifunctional

A great selection of oscillating saw blades for cutting wood,plastics, soft metals ,bi metals and other materials.

Universal quick release system

Universal quick release saw blades can be used on numerous oscillating tools.

Compatible with following oscillating tools:

Bosch Multi-X, Bosch (except MX30) , Craftsman Nextec Multi Tool, Craftsman Nextec 17438, Craftsman Nextec 61199, Craftsman Nextec 5910, Craftsman 2702 2.0 Amp, Chicago 67256, Chicago 67537, Chicago 67538, Chicago 67707, Chicago 68303, Cougar, Driving Force, EINHELL, Falke Tool Mate, Fein Multimaster Tools, Fein Multimaster AFMM 14, Fein Multimaster FMM 250 Q,Fein MultiMaster FMM 250 Q-MS, Fein MultiMaster MOX 6-25 Pneumatic, Ferm Zwolle Holland, Genesis Multi-Purpose, HARDIN AZ318-2 250W, Haussmann 5-in-1 Multi-Purpose Tool, Ideenshop, IIT, King Canada, LongActive, Mastercraft, Master Mechanic, Matrix, MEEC Tools, Millarco prof, Milwaukee, Ozito, Power Craft, Power Duro, Pro-Line, Ridgid Jobmax, Rockwell Sonicrafter Hyperlock.

NOTICE

Do not fit Fein Starlock，Bosch MX30

Do not fit Bosch Quick Release tools

Do not fit Fein Supercut

Product description

Diablo’s carbide teeth jig saw blades deliver extreme durability and superior cutting life in abrasive materials such as fiber cement and plaster. High-performance carbide teeth provide an unmatched up to 50X longer cutting life versus standard jig saw blades. The optimized blade design and Perma-SHIELD non-stick coating reduces heat and pitch build up for fast and effortless cuts. T-shank design fits all combo and most U-shank cordless and corded jig saws.

• Aggressive carbide tooth geometry delivers fast and effortless cuts
• Enhanced carbide tip to blade connection for extreme impact resistance
• T-shank design fits all combo and most U-shank jig saws
• Maximum performance in cordless and corded jig saws

Product description

HOLE SAW ONLY



Does NOT INCLUDE Pilot Bit, Arbor or Shield or Hole Pro X-230+



Blue Boar Tungsten Carbide Grit Recessed Lighting Hole Saw 6-3/8” is perfect for installing most 6-inch recessed light cans in ceilings and sofits.



CONFIRM the actual cutout size of your recessed lights as all 6" lights can vary by manufacturer. -- The hole saw has a hard tungsten Carbide grit that provides longer life in tough, abrasive materials.



Continuous cutting edge provides a smooth cut and does not catch on wood or metal lath and plaster. The open back design makes it fast and easy to remove the cut plug and start the next cutting the next hole.



This hole saw works perfectly with recessed lights (incandescent, halogen, and LED) made by Capri, Halo, Juno, Marco, Lithonia, Progress, Lightolier, Pathway & Thomas, and others light cans requiring a 6-3/8” opening.



The 1-inch cutting depth will cut through the thickest drywall, and plaster, and provides clearance so the carbide grit



Hole saw can also be used with Hole Pro HP1156 Large Shield and Arbor kit or Hole Pro X-230+ hole cutters for 100% dust containment of the drywall dust or when dealing with lead paint or asbestos and needing to use a HEPA vacuum.



Attaches to standard 5/8"-18 thread hole saw arbor adapters made for 1-3/8” and larger hole saws including the Blue Boar Heavy Duty 7/16” shank dual arbor and mandrel kit HP1597

• 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials
• Continuous cutting edge for smooth cutting even in wood lath and plaster
• Cuts through drywall, plaster, CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile
• Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit
• Open back design for faster cut plug removal

User questions & answers

Question:	What type of drill would you use this with to cut holes in drywall ceilings
Answer:	Hahahaha
Question:	Will this work on usg glacier drop ceiling tiles? Has anyone used on a drop ceiling
Answer:	It is a manual pull soaker.
Question:	I own a 1920 home, and its walls are made of lath and plaster. Does it cut through plaster
Answer:	I suppose it is a question of how far away the bird is. Some of the supersoakers will shoot a stream of water 25 or 30 feet and that would probably startle the woodpecker if you hit it with the water. I am a little doubtful because I would expect the woodpecker to fly away before you got close enough to shoot it. Why not use a garden hose with a spray nozzle.
Question:	Will this work for thin tin corrugated siding
Answer:	It holds enough water to soak your clothes from top to bottom. Like a syringe, you may hit with all water in one major push or in 3-5 small pushes. In case you like hitting with more water in a single push, you will have to fill it often.

Product description

ADJUSTABLE TWIN BLADE hole cutter kit



with infinite adjustment 1-7/8” to 9-1/4” for faster cutting for recessed lights, ceiling speakers, ducts with perfect balance



One hole saw kit replaces dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed.



Uses 7mm pilot bit, Hole Pro SKU HP1197.



Tough 11-1/4" OD ABS Shield - Needs 1/2" drill chuck – Take a quarter the power of hole saws so bigger holes easily cut



High Speed Steel and Tungsten Carbide Blades with 1-1/8” cutting depth replaced in seconds



Cutting depth 1-1/8” from a side, 2-1/4” if can be cut from two sides



NO NEED for BALANCE BARS as with SINGLE BLADE models that can break off



INCLUDES

-Pro grade adjustable hole cutter

-Ball bearing mounted ABS shield with soft silicon rubber gasket to trap all dust and shavings

-Sturdy Carry Case

-Replaceable blades and Pilot Bit

- narrow kerf High Speed Steel for wood, plastics, acoustic tile, tongue & groove, laminates, rubber and Tungsten Carbide blades for drywall, plaster, Hardi board, fiberglass, chipboard, OSB, plywood, MDF

-hex wrenches



The depth control knob helps to avoid accidental cutting of wires or pipes in walls or ceilings.



Vacuum adapter (HP1174 -- NOT INCLUDED) available for connecting shop vac where asbestos or lead paint exists



Cut holes in plywood and Engineered woods such as OSB up to 8” in diameter with 18 volt cordless drill



INCLUDES NEW 5/8” threaded shaft end for using the hole cutter with standard carbide grit holes saws up to 1-1/4 inch cutting depth with the same dust and depth control as the adjustable hole cutter



Do NOT USE with STUD DRILLS



NOT MADE FOR USE WITHOUT PILOT BIT



Recommend testing in scrap material to get used to tool and confirm cut hole size

• SHIPS WITHIN ONE BUSINESS DAY from our NV warehouse
• TWIN blades for faster/smoother cutting, strong shield traps dust; tensioning knob controls cutting depth
• 11" OD - Adjusts infinitely for holes 2" to 9-1/4", Shield turns drill into portable drill press to use anywhere
• UNIQUE 5/8” threaded shaft tip to QUICKLY MOUNT CARBIDE GRIT holes saws
• Sturdy Carry Case and replaceable blades: Cut plywood, sheetrock, plaster, veneers, cement board, ceiling tiles, T&G

User questions & answers

Question:	Is this tool capable of cutting a nice clean hole through 3/4 inch furniture grade plywood. the edges need to be pretty clean, not all chewed up
Answer:	There are two basic types of drop ceiling tiles, the type found commonly in commercial buildings that are a soft and fragile foam material and for these the adjustable hole cutters are best, and the type that is hard like sheetrock and for this type the carbide grit fixed size hole cutters will work well.
Question:	Is the xl arbor adapter included with this set
Answer:	Yes, it does. I used it on my 1910 home to cut in approximately 18–20 holes. One thing you need to consider is the thickness of the plaster and lathe to make sure the depth of the holesaw is appropriate. Good luck
Question:	How to clean after use
Answer:	The teeth are carbide coated, it should work on thin metal.
Question:	Can this cut cement board
Answer:	This is for 5pcs.

Product description

The Bosch Carbide Edge Jig Saw Blade provides 10X life versus standard bi-metal blades, featuring a carbide-tipped edge designed for cutting abrasive building materials. So this one jig saw blade really provides the confidence to make clean cuts in hard material. A thin blade kerf reduces material extraction, reduces heat and adds to performance. This jig saw blade helps provide the best solution for making scroll cuts across hard or specialty materials. It also helps make straight and curved bevel cuts.

From the Manufacturer

Bosch is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use. Whether for miter, straight or curved cuts, Bosch sells the right saw blade designed for high performance in all major brand jig saws.

• For fast, coarse cuts in plaster, cement board 1-1/4 In. to 2 3/8 In. thick, fiberglass and plasterboard 1/4 In. to 3/4 In. thick
• 6 TPI carbide tipped teeth for fast cutting and durability
• Perfect for construction, renovation, and remodeling
• 1 piece pack

User questions & answers

Question:	will this blade work on solid surface material for countertops
Answer:	CLEANING TIPS FOR HOLE PRO DUST SHIELDS 1) To clean the inside of the shield use a damp cloth and NO WATER near the center bearing race, or they will cease up *** CLEANING WITH WATER CAN CAUSE THE BALL BEARING RACE TO FREEZE AND MAKE THE DUST SHIELD UNUSABLE*** 2) To clean the yellow gasket, leave it in the shield and take a damp sponge with a little dish soap and wipe away any residue picked up from the ceilings and then wipe the gasket dry.
Question:	Will this blade cut 1/4 inch copper bus bar
Answer:	The Tungsten Carbide blades are for cutting sheetrock, MDF, plaster, plywood, fiberglass, Hardi fiber-cement board, & similar materials and are installed in the hole cutter when you get it. The HSS blades (in the upper right hand corner of the carry case) are for cutting wood, melamine, acrylic sheet, soft acoustic tile and most plastics. Both types of blades are replaceable.
Question:	Can this blade be used as bimetel blade for example for 2x4 wood with nails
Answer:	Any drill will work! It does require a shank if you don’t have one. I used the Dewalt DW1803. Good set up and worked well. Tip: run the drill in reverse and the drill bit won’t wind up in your vapor barrier. This is one of the only hole saws you can do this with because it doesn’t use directional teeth to cut with.

Product features

Specialty

Bosch specialty jig saw blades are built for precision cuts in wood, hardwood and light metals. These blades apply an aggressive tooth pattern to turn out great cuts in thick, tough materials used in deck building or general construction. These are non-traditional applications where the superior control of the jig saw can offer efficiency and greater accuracy. Typical applications include straight cuts, notching and work arounds.

Side Set & Ground

Side set and ground teeth offer clean, fast cuts in wood and plastics. In the design of jig saw blade teeth, side set means teeth are designed to be offset and are used for cuts that are fast. These blades tend to have fewer teeth per inch (TPI) and are used in thicker material applications.

Wavy Set & Milled

Wavy teeth sets are used for cuts in metal, non-ferrous metal, aluminum and plastics. For wavy teeth sets in jig saw blades, teeth are aligned in a wave design and can be used for straight, fine cuts. These blades tend to have a higher teeth per inch (TPI) count and are used in thinner material applications.

Side Set & Milled

Side set and milled teeth offer fast, rough cuts in wood and plastics. Teeth that are side set are offset in design and are used for faster, rough cuts. These blades tend to have fewer teeth per inch (TPI) and are used in thicker material applications where a rough cut is acceptable.

Ground & Taper Ground

Ground and tapered ground jig saw blades offer a precise, fine and clean cut in wood. Taper set teeth have a straight alignment and are used for slower, very fine cutting. These blades tend to have higher teeth per inch (TPI) and are used in wood applications requiring a slow, smooth cut or when cutting thinner materials.

Product description

Package Includes: 50 Pack --- 1-3/8-Inch Wood/Plastic/Soft Metal Saw Blades

UNIVERSAL COMPATIBILITY

The saw blades is designed with quick release blade mechanism,which is suitable for most quick change Oscillating tools as well as those with old hex screw system

Compatible with following oscillating tools:

Dewalt, Black&Decker, Portcable

Rockwell, WORX

Milwaukee, Ridgid

Bosch Multi-X 

Dremel 

Fein Multimaster Tools: AFMM 14, FMM 250 Q, FMM 250 Q-MS, MOX 6-25 Pneumatic (except Fein Starlock)

Craftsman: Craftsman Nextec Multi Tool, Craftsman Nextec 17438, Craftsman Nextec 61199, Craftsman Nextec 5910, Craftsman 2702 2.0 Amp

Chicago

Hitachi: CV350V

Kobalt

Grizzly PRO T30296

Wen

Genesis Multi-Purpose

NOTICE:

The following model devices need to be used with the C-clip adapter:

Dremel MM40 / MM45, Bosch MX30E / MXH180B

• Tougher and Thicker: Made of high speed steel and high carbon steel. Thick gauge metal and special manufacturing technology ensure excellent wear resistance and durability.
• Oscillating Saw Blades Kit: Contains 50 pack oscillating tool blades, for cutting wood, soft metal and plastic. These oscillating saw blades can meet a variety of needs, which could be used professionally for workshop ,household or other place.
• Universal Compatible System: Our quick release saw blades are compatible with many oscillating tools in the market, such as Black&Decker, Craftsman, Chicago Electric, Fein Multimaster, Milwaukee, Hitachi, Dewalt and More.
• Special Design for Precision cutting: Built-in length markers on two sides, one side is Inch and other is Millimeter, ensure you can get accurate cuts easy and fast while you working with it. Manufactured with a durable cutting edge that resists wear and cuts quickly.

User questions & answers

Question:	Does it fit rigid r
Answer:	Hi! The T141HM1 is designed to be used for fiberglass and plaster board 1/4"-2-3/8". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Do these blades come in a storage box or are they just loosely packed in a cardboard box
Answer:	Ive used this place primarily for G-10, which is really challenging to cut anything other than a straight line. Might be better off with the Bosch carbide all purpose for demolition blade. Depends on what and how much metal is in the wood you are cutting. The Bosch demolition saw and blades will let you take out an entire wall in a few minutes.
Question:	Does it work with porter cable
Answer:	Thanks for your help everyone. I need to cut a CLEAN 8-9 inch hole in 3/4 in 13 ply baltic birch. Since there are no hole saws that big this looks like the tool I need. Dear seller, thanks for the tip about the HSS blades!
Question:	I have a Fein multimaster and can't figure out how these are supposed to work. Sounds like maybe there a 'c' clip I'm supposed to have? a link pls
Answer:	The X-230+ has 5/8"-18 threaded shaft end for attaching a 1-1/4" deep carbide grit hole saw and providing dust and cut depth control.Using a hole saw deeper than 1-1/4" with the X-230+ shield would use the XL-Arbor Adapter, HP1168.

Product description

The DEWALT DWA4242 Diamond Flush Cut Oscillating Blade features Diamond Grit, a synthetic diamond coating for long life in tough applications. This blade is a purpose blade commonly used for grout removal - flush cut design. The DEWALT Diamond Flush Cut blade offers UNIVERSAL FITMENT which allows for use in most oscillating tools.

• Designed as a multi purpose blade for grinding applications; commonly used for grout removal
• Diamond Grit; a synthetic diamond coating for long life in tough applications
• UNIVERSAL FITMENT which allows for use in most oscillating tools

User questions & answers

Question:	do ocelating blades come in a pack for different use loke metal plastic and wood cuyying
Answer:	They come in a nice little pouch
Question:	Will this blade fit a dremel multi-max mm45 quick change tool
Answer:	It says Universal, we use it them on a Milwaukee tool, they work great.
Question:	Can you cut a granite/ marble tile with this
Answer:	From the question I am gathering the blades dont fit your too properly. If thats the case you might have to get a adapter. These blades are supposed to fit all multitools but you know that goes. If thats the case just Google adapter for the tool you have.
Question:	How wide is the blade? Will it work for 1/16" grout lines in the corner of a shower
Answer:	Thank you for your question. The T141HM1 Jigsaw Blade is designed for fiber glass and plaster board 1/4"-2-3/8" materials. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product description

One Set of Saw Blades 3PCS for Medical Electric Plaster Saw Cast Cutter Orthopedic Sports Medicine



Specifications:

Diameter of round saw blade 43mm

Diameter of round saw blade: 64mm

Diameter of sector saw blade: 52mm



Features:

High quality, light weight, perfect performace

3PCS Saw Blades for Medical Electric Plaster Saw



Includes:

1 x 43mm Round Saw Blade

1 x 64mm Round Saw Blade

1 x 52mm Sector Saw Blade

• Diameter of round saw blade: 43mm
• Diameter of round saw blade: 64mm
• Diameter of sector saw blade: 52mm
• High quality, light weight, perfect performace
• 3PCS Saw Blades for Medical Electric Plaster Saw

User questions & answers

Question:	El producto tambien tiene con alimentación 220v
Answer:	Our Grout Removal blade is equipped with UNIVERSAL FITMENT™, please consult your tool specifications to ensure compatibility.
Question:	El artículo se encuentra ubicado en USA
Answer:	I have cut porcelain tile and not very neatly, you could get away with a small cut here or there with granite or marble tile. I use it for grout with someone squirting water on the cutting edge.
Question:	Can this saw be used to remove fiberglass casts
Answer:	I don't think it will fit in that space. It will be close. If I recall correctly, the cutting edge has like a coating of diamond making it thicker than the metal on the rest of the blade. I don't have mine anymore to measure for you.
Question:	Can you attach a vacuum to this
Answer:	Rigid R2850 - It looks the same, so I believe they will Look at the open end. If that is the same design, it should fit. Most are universal in size. However, these are low end blades. They go dual fast and become hot quickly. So consider them as throwaways. For long life or detail work, suggest you you need to buy a name brand if you want them to last.

• 9-inch reciprocating blade for masonry application - use to cut through brick, mortar, stone, cinder block, and more
• High carbon steel construction with tungsten carbide teeth
• Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch, Hitachi

User questions & answers

Question:	Will this blade cut through stucco and the chicken wire backing
Answer:	I have never tried to cut stucco with chicken wire backing. I think my primary concern would be the teeth of the saw blade possibly catching on the wire and causing the saw to jerk with the risk of you dropping it. Knowing that and being prepared for such a situation it would not cost much to try the blade.
Question:	Will this fit a Erebus reciprocating saw
Answer:	They fit a Milwaukee sawsal not sure for yours though
Question:	What is the maximum width of the blade
Answer:	Width is 31/32's" and thickness is 1/8"
Question:	Does masonry blade come in 12 length
Answer:	I don't know. Mine are all 9".

Product features

Use to cut through brick, mortar, stone, cinder block, and more

Caliastro's 9-Inch Masonry Reciprocating Sawzall Saw Blade has been specifically designed and tested to cleanly and quickly cut through brick, mortar, stone, cinder block, and more.

High carbon steel construction with tungsten carbide teeth

A high carbon steel blade with tungsten carbide tipped teeth for aggressive cutting capability. Re-engineered design in the summer of 2019 offers improved teeth durability and blade life.

Fits all brands of reciprocating saws/sawzalls

Works with all reciprocating/sawzall saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch and Hitachi.

Caliastro LLC

Caliastro LLC is a small independent company based out of Chicago, Illinois. We value our customers and strive to make sure every customer is completely satisfied with our products.