11 best freud hand saws

Product description

What is “SUIZAN“?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools.

With a history of over 100 years, all of the processes are completed in one of Japan’s towns known for their craftsmanship: Sanjō in Niigata prefecture.

That’s why our products are highly appreciated by many woodworkers.



One of the Japanese Tools

There are a couple of differences between Western tools and Japanese tools.

In many cases, Japanese tools are lighter and simpler than Western ones because Japanese tools are minimally designed and there is no unnecessary waste.

Nowadays, the Japanese tools has become a popular tool in woodcrafting around the world due to its high quality.



Do you know about a “Pull Saw“?

This product is a pull saw.

Japanese saws cut materials via pulling and thus are called “pull saws.”

It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean.

And particularly this saw's blade is sharper and thinner (0.02 inch), and has a greater number of teeth per inch (9 & 15 TPI) than comparable saws of its size.



This is a Ryoba Saw

A remarkable point of this Ryoba (Double Edge) Saw is that there are two blades in one saw - Cross-Cut and Rip-Cut.

Therefore you don’t have to change your tools: you only have to use it!

It is for time-saving and space-saving in your tool box.



If you have some difficulty using Western saws, once get to use a Japanese saw.

You will never go back to a conventional saw!

• JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.
• JAPANESE STEEL: All SUIZAN Japanese saws are consisted of top quality japanese steel. It uses high quality Japanese steel, which makes cuts to be sharp.
• MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen.With a history of over 100 years in making japanese hand tools, all of the process gone into making tools were completed in one of Japan’s towns known for their craft making tradition: Sanjō in Niigata
• DIVERSIFY YOUR WOODWORKING LIFE: No matter you are a master or a beginner in using saws, it gives you brand new experience from using traditional Japanese style saws and enables you to make a wider variety of woodworking products, thus change your life!

User questions & answers

Question:	Does the blade come with a cover to protect the teeth when not using it
Answer:	I have cut 4X4 pine post to shape legs..it works perfectly fine. Be slow and it does its own work with super finish
Question:	id like to buy all the suizan product line are the blades replaceable ? if so where can i order the Blades
Answer:	Japanese saws are normally much too thin to track in a western mitre box .Also western saws you can alter the cut but japanese saws you can not .so if you go off course with a japanese saw it is better to start a different cut line.
Question:	Hope long do blades last
Answer:	It says 22 crosscut and 9 rip in the description.
Question:	What other saws should i buy for a started set in addition to this saw
Answer:	I don't believe there are any manufacturer's instructions in English. I own 3 Gyokucho Japanese Saws (including this one), and I found the best info regarding the proper use of this saw on that popular video site. Just do a search for "Using Japanese Pull Saws", and you will find a plethora of instructional videos. These saws do require a certain technique that is vastly different from their western counterparts, but once you see it done, you'll be able to start practicing it. And once you get the hang of it (mostly just a light touch and the proper cutting angle), you will really enjoy using this saw.

Product features

Do you know about a “Japanese Pull Saw“?

Japanese saws cut materials via pulling and thus are called “pull saws.” It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean. And particularly this saw's blade is sharper and thinner, and has a greater number of teeth per inch than comparable saws of its size.

MADE IN JAPAN BY JAPANESE CRAFTSMEN

All SUIZAN products are manufactured in Japan by Japanese master craftsmen. While many other makers in Japan have shifted to creating products outside of Japan, we continues to plan, create trial products, and carry out product tests in our factory and are able to incorporate the fresh and new opinions of craftsmen. This allows us to ensure our high quality in our products.

Easy to interchange

The blades are easily removable and interchangeable. Links of blades are in all product links so you can easy to find them.

Over Fifty Thousand woodworkers Have Switched to SUIZAN

Over fifty thousand woodworkers, from executive woodworkers like professional carpenter, furniture maker, musical instrument makers to home carpentry and everyone in between, have switched to SUIZAN for our superior quality, unconditional support, and loyal community, and SUIZAN users are treated like family.

What is SUIZAN?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools. With a history of over 100 years, all of the processes are completed in one of Japan’s towns known for their craftsmanship: Sanjō in Niigata prefecture. That’s why our products are highly appreciated by many woodworkers.

A Brand Ambassador of SUIZAN

Jonathan Katz-Moses is an entrepreneur, inventor, and content creator with a lust for teaching only surpassed by his love for coming up with unique solutions to everyday problems. His love for making things has been a life long addiction and in 2014 he decided he needed to chase that dream. Jonathan shares his love for woodworking on his self titled YouTube Channel and has invented several woodworking tools that can be found in 157 countries around the world. He is the inventor of The Katz-Moses Magnetic Dovetail Jig and The Katz-Moses No Deflection Stop Block. Jonathan produces a segment on his YouTube Channel called "Joint of the Week" where he showcases different joinery techniques using SUIZAN Saws.

Product description

For use with Black & Decker Navigator Saw # SC500G (2581-1407). Use to cut wood, metal, and plastic. 3 piece set includes curve cutting, metal cutting, and general purpose. Carded. Length: 11.75. Width: 2. Height: 6.5

From the Manufacturer

Black & Decker 74-598 Navigator combo set comes with 3 replacement blades for your Black & Decker navigator powered handsaw.

• For use with Black & Decker Navigator Saw # SC500G (2581-1407)
• Use to cut wood, metal, and plastic
• 3 piece set includes curve cutting, metal cutting, and general purpose
• Carded
• Length: 11.75

User questions & answers

Question:	I was looking for a small saw that would be great for making small doll furniture. Would this saw be good for that type of woodwork
Answer:	No, this is not compatible with JS200.
Question:	can someone tell me how long is the longest blade
Answer:	No, this does not come with the attachment screws.
Question:	This can use with Black & Decker BDCMTRS Matrix Reciprocating Saw Attachment
Answer:	Yes, the clamp is compatible with JS600 You may view all compatible models at https://servicenet.dewalt.com/Parts/Search?searchedNumber=582593-00
Question:	Does anyone know if this will fit the bdphs180g
Answer:	Yes. These are "universal" fit. Work with any handyman jig saw - any brand. I'd buy again. Nice assortment of blade types for wood, plastic, metal.

Product description

LENOX Tools Bi-Metal Self-Feed Bit Kit, 16 Piece (1787506), EXTREME DURABILITY, High speed steel cutting edge for superior durability in nail-embedded wood, LONGER LIFE, High speed steel screw tip increases wear resistance for extended life, FAST, EASY DRILLING, Unique parabolic screw tip pulls the bit through material quickly and effortlessly, RESHARPENABLE, Resharpenable with LENOX Diamond File (product no. 25312DIAF1).

• EXTREME DURABILITY, High speed steel cutting edge for superior durability in nail-embedded wood
• LONGER LIFE, High speed steel screw tip increases wear resistance for extended life
• FAST, EASY DRILLING, Unique parabolic screw tip pulls the bit through material quickly and effortlessly
• RESHARPENABLE, Resharpenable with LENOX Diamond File (product no. 25312DIAF1)

User questions & answers

Question:	What is the size of the set screws on the extensions, lost mine
Answer:	(5) 12-Inch lead screws
Question:	What are the sizes
Answer:	16 Piece LENOX Bi-metal Self-feed Bit Kit 1-1/8", 1-1/2", 1-3/4", 2-1/8", 2-9/16"1-1/4", 1-3/8", 1-1/2", 1-3/4", 2-1/8, 2-9/16" 5-1/2" Extension Five lead screws Hex Wrench Set
Question:	what is the shank size
Answer:	7/16" hex is the shank size.
Question:	Is this set manufactured in USA
Answer:	This bit kit is manufactured in China.

Product description

8 X 1/8 X 5/8 CHIPPER S. DADO

• 8 X 1/8 X 5/8 CHIPPER S. DADO
• 8 X 1/8 X 5/8 CHIPPER S. DADO
• 8 X 1/8 X 5/8 CHIPPER S. DADO
• 8 X 1/8 X 5/8 CHIPPER S. DADO
• 8 X 1/8 X 5/8 CHIPPER S. DADO

• 9-inch reciprocating blade for masonry application - use to cut through brick, mortar, stone, cinder block, and more
• High carbon steel construction with tungsten carbide teeth
• Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch, Hitachi

User questions & answers

Question:	Will this blade cut through stucco and the chicken wire backing
Answer:	I have never tried to cut stucco with chicken wire backing. I think my primary concern would be the teeth of the saw blade possibly catching on the wire and causing the saw to jerk with the risk of you dropping it. Knowing that and being prepared for such a situation it would not cost much to try the blade.
Question:	Will this fit a Erebus reciprocating saw
Answer:	They fit a Milwaukee sawsal not sure for yours though
Question:	What is the maximum width of the blade
Answer:	Width is 31/32's" and thickness is 1/8"
Question:	Does masonry blade come in 12 length
Answer:	I don't know. Mine are all 9".

Product features

Use to cut through brick, mortar, stone, cinder block, and more

Caliastro's 9-Inch Masonry Reciprocating Sawzall Saw Blade has been specifically designed and tested to cleanly and quickly cut through brick, mortar, stone, cinder block, and more.

High carbon steel construction with tungsten carbide teeth

A high carbon steel blade with tungsten carbide tipped teeth for aggressive cutting capability. Re-engineered design in the summer of 2019 offers improved teeth durability and blade life.

Fits all brands of reciprocating saws/sawzalls

Works with all reciprocating/sawzall saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch and Hitachi.

Caliastro LLC

Caliastro LLC is a small independent company based out of Chicago, Illinois. We value our customers and strive to make sure every customer is completely satisfied with our products.

Product description

The LENOX Tools Bi-Metal Speed Slot Hole Saw Kit with T3 Technology (26 Piece) features hole saws with enhanced tooth geometry to cut 50% faster than previous LENOX hole saws. Twice as durable as our previous generation when cutting through metal, these bi-metal hole saws feature thicker walls to minimize tooth loss and improve durability. Staircase SPEED SLOTS have wide slots placed low on each hole saw and multiple leverage points to make it easy to work plugs out with a screwdriver. This design effectively removes sawdust and chips and helps prevent plugs from becoming stuck in each saw. This hole saw set is 10% taller than previous models, they deliver cleaner cuts through two-by lumber.

From the Manufacturer

The Lenox Tools 308042000G 26 Piece Big Daddy Speed Slot Bi-Metal Hole Saw Set features the new Speed Slot Hole Saws by Lenox. The new Speed Slot hole saw outperforms all competitors in wood cutting, plug removal, and metal cutting applications. The patent pending Speed Slot features a staircase design for easy plug removal. The slot is wider than most and is placed lower on the hole saw with multiple leverage points to easily eject the plug with a standard screwdriver. The hole saw is 10-percent taller than the previous model to deliver cleaner cuts through two-by lumber. The Speed Slot efficiently removes saw dust and chips while producing a fast cut and preventing the plug from getting stuck in the saw. The new hole saw also features up to twice the life of the previous model when cutting metal. An enhanced tooth geometry, a thin kerf design and an advanced coating contribute to the efficiency of the cutting process by removing material faster, therefore generating less heat while cutting. Kit contains 3/4", 7/8", 1", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/4", 2-1/2", 2-11/16", 3", 3-1/4", 3-3/8", 3-5/8", 3-3/4", 4-1/8", 4-1/2", 4-3/4" hole saws; 2L 1/2", 5L 3/8", 1L 1/2" standard arbors, and three pilot drills.

• 2X DURABILITY AND LONGER LIFE: 2X more durable with 50% longer life than previous LENOX hole saws
• HOLE SAW SIZES: Includes the most commonly used hole saw sizes
• INCREASED WALL THICKNESS BENEFITS: Increased wall thickness improves durability and minimizes tooth loss
• TOOTH DESIGN PENETRATES EASILY: Optimized tooth design penetrates metal with ease
• EASY PLUG EJECTION: Larger, sharper teeth for faster cutting and SPEED SLOT staircase design for easy plug ejection
• EASY PLUG REMOVAL: Speed Slot features a staircase design for easy plug removal
• 2X BLADE LIFE: Up to 2X the life in metal cutting

User questions & answers

Question:	Will it drill through stainless steel
Answer:	listing says bi-metal this means (for cutting metal)!!!!!!!!!!!!!!!!!!!!
Question:	Does this, or does this not come with a 2 1/8" hole saw? kind of need that. i see in the comments that it does include the 2 1/8inch bit
Answer:	yes I used it to cut through 3/4" plywood
Question:	Will these fit a ¼ inches impact driver
Answer:	A Milwaukee 28v drill
Question:	sorry camt find sizes , can u help me plz? they are not shown .. i want the sizes of the individual cutters plz
Answer:	The saw does not come with a pilot drill. The pilot drill is part of the arbor required to be purchased separately.
Question:	will this cut through 1/4" steel
Answer:	Includes: (1) 3/4-in hole saw; (1) 7/8-in hole saw; (1) 1-1/8-in hole saw (1) 1-1/2-in Hole saw; (1) 1-3/4-in hole saw (1) 2-in Hole saw; (1) 2-1/4-in hole saw; (1) 2-1/2-in hole saw (2) Pilot bit; (1) arbor 1-1/4 - 6-in sizes (1) Arbor 9/16 - 1-3/16-in sizes; (1) case.
Question:	Will this dewalt dwa1880 5-inch hole saw cut through plywood
Answer:	The set does include the Case along with 1) 3/4-in. Hole Saw, (1) 7/8-in. Hole Saw, (1) 1 1/8-in. Hole Saw, (1) 1 1/2-in. Hole Saw, (1) 1 3/4-in. Hole Saw, (1) 2-in. Hole Saw, (1) 2 1/4-in. Hole Saw, (1) 2 1/2-in. Hole Saw, (2) Pilot Bit, (1) Arbor 9/16 - 1 3/16-in. sizes
Question:	What drills are you guys using? Ive been using my 18 volt ryobi on 1/2 inch birch plywood and my drill overheats after a couple holes
Answer:	with most hole saw sets you spin the hole saw onto the arborand use it when its time to remove it you have to sometimes pry it off from the arbor. This can be done two ways. Sketchy Way Keep the arbor on the drill and hold the drill between your legs and use a large flat head screwdriver and slide it into the side holes and then you can either wack the screwdriver with a hammer or another tool be sure you are wacking it the right direction. you could also help it with some lubricant(wd40) Proper Way Use a pair of adjustable pliers, locking pliers or a vise and hold the arbor at the base. Then use a flat head screwdriver or another pair of adjustable pliers to spin the hole saw off the arbor.
Question:	Does this include a pilot drill bit
Answer:	If you count only what comes in the kit, no you cannot use it without the drill bit, the rotating saw is locked with a nut to the drill bit. However, if you were creative, you could make or get something so that it went through the middle, but still let you lock it to the rotating saw. I suppose you could even take the bit and cut it down to nothing, just leaving the locking area.
Question:	What sizes
Answer:	what do you mean ?don't understand the queston
Question:	Does this come with a case description says yes answered question says no & does the larger arbor have the pins to keep the saw from becoming to tight
Answer:	The LENOX T3 has a 0.070 kerf width of cut.
Question:	Can anyone tell me where to find instructions??? I've used one blade and can't figure out how to remove the auger
Answer:	This set is not for 6 inch holes. Set is awesome for the price
Question:	can this be used without the drill bit
Answer:	Use a diamond coated hole saw for traditional stucco, which is much like stone. I squirt water from a spray bottle onto the cutting surface for lubrication and to reduce airborne dust. Use a hammer drill if possible because stucco is tough.

Product features

Twice as Durable

With teeth that cut 50% faster than our previous hole saws, the new LENOX Bi-Metal Hole Saws with T3 technology last twice as long even when cutting through metal for unbeatable performance and unmatched efficiency. These hole saws feature the innovative Speed Slot design to make plug ejection fast and easy.

2X More Durable

LENOX Hole Saws with T3 technology easily cut through metal and still last twice as long as previous generation hole saws.

Thicker Walls

These hole saws are constructed with thicker walls to maintain integrity longer and lose fewer teeth on tough materials than traditional hole saws.

Built to Last

LENOX Hole Saws with T3 Technology are 50% more durable than previous generations for long-lasting performance.

Product description

The PORTER-CABLE PCE345 6 amp Orbital Jig Saw is designed with a 7 position speed dial (0-3200 rpm) integrated into the trigger which provides multiple speed settings for optimal cutting results. The 6 Amp motor delivers more power in demanding applications, and the 4 orbital settings provide best cutting performance in a variety of materials. It offers a lock-on button that provides easier control during prolonged use, and help to diminish user fatique, along with an oversized front and handle overmold that provide greater control and comfort during use. This jig saw also offers tool-free blade change to make blade replacements fast and easy and minimize down time.

• 7 position speed dial integrated in the trigger
• 6 amp motor for more power
• 4 orbital settings for a variety of materials
• Lock-on button for prolonged use
• Tool free blade change

User questions & answers

Question:	Is it 110V only
Answer:	I don't know without digging it out of the garage, but I don't remember mine having a laser on it. Maybe you have another model than mine
Question:	Does the saw take U-shank or T-shank blades
Answer:	Yes
Question:	Dose this tool have a case , if so how much will it cost & and where can I buy it
Answer:	That might depend on the thickness and type of plastic. Very thick, dense plastics with a low melting point might melt a bit. Most wouldn't melt. Glass, is not really suited to this kind of cutting tool, besides it is usually scored and cracked apart. If you need curves in glass, score the curve once and make radial scores away from the curve and break it off in smaller sections.
Question:	Im cutting inch thick trim thats in place can i set the blade cutting depth
Answer:	It does not come with a case.

Product description

An extremely handy tool. Keep a saw folded up in your pocket and when a trim job or small cut of piece needs to be done, the saw to do it is in your pocket. Precision cuts for all finish work and more 18 TPI saw blade Super flexible thin blade (.015 inch) Made in USA Similar to Japanese Saw

• 18 TPI saw blade
• Super flexible thin blade (.015 inch)
• Protective handles to save on hands and pocket
• Made in USA

User questions & answers

Question:	Is each side the same? i.e., both same kind of saw teeth, at 18 tpi
Answer:	As far as I can tell, both sides are the same. This is a flush cut saw, so there's no set on the teeth and therefore is best used just as a flush cut saw with the occasional exception. Really great tool that protects the blade when folded so it can stay sharp when thrown in a toolbox. I'm a big fan
Question:	will it cut through bone, like the rib cage of a deer or the pelvic bone, looks perfect to put in a back pack
Answer:	Not sure, I use it for custom cabinetry. I suppose it's inexpensive enough to give it a try. The teeth are designed for a flush cut and the blade is pretty flexible so I would think it might bind up.

Product description

This LENOX TIGHT SPACES tubing Cutter Kit includes tube cutters that have shock-resistant steel with optimized blade geometry to provide less burr and more cuts. Each tube cutter features a non-slip grooved cast body that only needs 1/2-inch clearance to cut. Their stainless-steel rollers protect them from rust and corrosion.

• Less Burr. More Cuts - Optimized blade geometry of shock-resistant steel
• Compact Design for Tight Spots - Non-slip grooved cast aluminum body only needs 1/2" clearance to cut
• No Rusting - Stainless steel rollers protect the cutter from corrosion
• Quick Identification - Color coding for easy tool recognition and cutting direction
• Kit Includes 1/2", 3/4" and 1" Tight Space Tubing Cutters

User questions & answers

Question:	Country of Origin
Answer:	It cut plastic tube ... I couldn't said that works well on fiber glass... I don't know how the finish will look because of the fiber...
Question:	Is this.like.the general auto cutter
Answer:	Yes, it can cut most pipes. BW2
Question:	Which replacement Cutting wheel are for this unit
Answer:	Yes, it will cut up to 1-1/8"
Question:	Does this come in 7/8 and 3/8 sizes
Answer:	Its maximum opening ability is 1 and 1/8 inch so although it will cut copper it does not sound like it will open wide enough.

Product description

Jab saws can rip or tear your tool bag. With Klein Tools Folding Jab Saw, there’s no need for taped-up, homemade sheaths or big holes in your tool pouch. The fast cutting carbon steel blade is as sturdy as a fixed blade saw, but folds smartly into the comfort-grip handle. The lockback mechanism secures the blade at a full 180-degrees and also at a 125-degrees for those hard to reach spots. Folded drywall hole saw stores conveniently and easily. Hand Saw Blade locks securely open at both 180 and 125 degrees. Folding saw is as sturdy as a fixed blade jab saw. Comfortable, non-slip grip handle. Lanyard hole for tethering. Designed to cut through drywall, wallboard, plywood, plastic, and other construction materials. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Folding saw with durable carbon steel blade is as sturdy as fixed blade jab saws
• Hand saw has faster cutting blade with triple ground teeth and ability to cut in both directions
• Lockback mechanism secures the blade open at 125-degree and fully open at 180-degree
• Folded saw keeps the blade from piercing through tool pouches and bags
• Cushioned handle-end for easier palming of the saw

User questions & answers

Question:	Se pueden reemplazar la naranja
Answer:	Yes, I have used it on moulding many times and have had good results. The speed of the feed, in my opinion, is the most important thing to a successful and clean cut.
Question:	Where is this made
Answer:	1/8 or less
Question:	Can you put a sawzall blade in it
Answer:	absolutely, very well.
Question:	Are blades replaceable? I run through about a saw a month. With heavy use and cuttimg plaster as opposed to drywall destroys a blade very quickly
Answer:	This tool is not designed for concrete cutting; an occasional rock or pebble might be O.K. but not a steady diet.

Product features

Folding Jab Saw

Carrying a jab saw can rip or tear your tool bag. With Klein Tools Folding Jab Saw, there’s no need for taped-up, homemade sheaths or big holes in your tool pouch. The fast cutting carbon steel blade is as sturdy as a fixed blade saw, but folds smartly into the comfort-grip handle.

Product description

Bosch Edge Reciprocating Saw Blades start sharp, stay sharp, and with Turbo-Teeth technology last up to 3X longer than standard reciprocating saw blades. Designed for extreme cuts for tough construction uses, these blades deliver the best performance for pro cutting applications. The Edge's exclusive Turbo-Teeth design, performance-optimized blade geometry and Swiss-made reliability add up to a line of blades that deliver results.

From the Manufacturer

Bosch RP125 12-Inch 5 TPI Wood Cutting reciprocating Saw Blades (5 Pack) are from a new line of recip blades. By incorporating key design features, materials and patented tooth technologies, Bosch optimizes blade cutting efficiency for the fastest cutting and longest lasting blades available. Choose from blades suited for occasional, standard, heavy or demolition use in a variety of materials such as wood with nails, metal, stainless steel, cinder block, cement board or fiberglass. Flexible blades, thick kerf and tall body blades and carbide blades for abrasive materials are available and blade selection is made even easier with application color-coding and callouts on the blades. Bosch is the worldwide leading manufacturer of linear edge, topping the market through engineering expertise, manufacturing capabilities and world reknowned quality.

• TOUGH: Designed for pruning and wood cutting, the 5-piece RP125 saw blade set delivers fast, long lasting performance
• LONGEVITY: The Bosch RP125 Reciprocating Saw Blade Set features Turbo-Teeth technology so the blades last up to 3X longer than standard reciprocating saw blades
• PRECISION: The blades are designed for extreme cuts for tough applications and deliver the best performance for pro-cutting applications
• CONVENIENT: The five blades of the set are color-coded grey for easy identification
• VERSATILITY: With this set users can choose from blades suited for occasional, standard, heavy or demolition use in a variety of materials such as wood with nails, metal, stainless steel, cinder block, cement board or fiberglass

User questions & answers

Question:	Will this blade cut through 4" x 8" lanscaping ties
Answer:	Thank you for your question. The RP125 blade will not work with landscaping ties. For that we would recommend a big circular saw. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7A-7P CST.
Question:	Is it 1/2 inch universal shank
Answer:	By now pretty much every recip saw blade sold has the shank shown in the picture. If you've got a recip saw made in the last 10 or 15 years, you should be be fine. Did you look at the picture? Look at the shank in the picture, look at the blades you're using now, they should be the same.
Question:	would this cut through english ivy roots. Home depot blade didn't do anything to them
Answer:	Thank you for your question. The RP125 will work to cut the English ivy roots. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Are these blades really 12 inches? SKIL 94100-05 are listed as 12 inch on Amazon and Home Depot, but some people complained they are 9 inches
Answer:	Yes, but. The actual blade is 12 inches from end to end, however that includes the portion of the blade that is held in the blade clamp. Subtracting the approximate 1 inch that gets locked in blade clamp and a little additional loss depending on position of the tool shoe and considering the minimum stroke position, the usable exposed portion of the blade yields a maximum cutting depth of 9 to 10 inches for a 12 inch blade. The use of end to end measurement seems to be an industry standard and is consistent for blades of all sizes. So yes this is a 12 inch blade.

Product features

Turbo-Teeth Technology

The Bosch-exclusive tooth design helps blades last up to 3x longer. Combined with superior manufacturing, these high-performance blades are ideal for meal and other demanding materials.

Engineering for Extreme Cuts

Edge recip blades are designed for extreme cuts in tough construction applications. Made with premium materials, they provide durability and dependability.

Precision Ground Blade

Bosch delivers a performance-optimized blade and geometry with reinforced teeth that stays sharper longer and clears material efficiently.

Swiss-Made Blade

Using the best technology in the industry, Bosch features meticulously crafted Swiss-made accessories that are optimized for specific materials and applications.