13 best carbide reciprocating

Product description

Diablo by Freud DS005SC Carbide Reciprocating Saw Blade Set (5 Piece) (1 per pack)

• 50x longer cutting life versus standard bi-metal reciprocating saw blades
• High-performance Carbide for greater durability and cutting performance
• Includes: 6-inch 5/7 TPI nail-embedded wood blades, 6-inch 8 TPI metal cutting (3/16 in.-1/2 in.) reciprocating blade
• Includes: 9-inch 8 TPI metal cutting (3/16 in.-1/2 in.) blade and 9-inch 5/7 TPI nail-embedded blade
• Quantity: 1 set per pack

User questions & answers

Question:	Will this fit an air saw
Answer:	Dear Customer， Thank you so much for your inquiry and it’s my pleasure to answer it. 1, Make sure all the connectors are connected. The one inside the Right Column is offen missed, and there are 2 connectors on the right side under the console (direction: when you are on the running deck). 2, If all the connectors are well-connected already, contact us by email. Our service email address is [email protected] Hope this resolves your concern. We appreciate your attention & interest in our products! Thanks a lot. Best regards, ADVENOR fitness Michael
Question:	Will the long one's cut cast iron pipe
Answer:	The walk is sound and comfortable. No problem with absorption and very steady!
Question:	How much longer do these blades last compared to the prior generation
Answer:	Hello Emma, Thank you for your inquiry and I am glad to answer your questions. Yes, you will have to lubricate the running belt after some time. Please rest assured that lubricant is in the package that came with the product and that we have the steps to apply for lubrication in our assembly instructions. We suggest that after the first 25 hours of use (or 2-3 months), please apply some lubricant, and repeat for every following 50 hours of use (or 5-8 months). How to check running belt for proper lubrication Lift one side of the running belt and feel the top surface of the running deck. If the surface is slick to the touch, then no further lubrication is required. If the surface is dry to the touch, apply some lubricant. How to apply lubricant Lift one side of running belt. Pour some lubricant under the center of the running belt on the top surface of the running deck. Run on the treadmill at a slow speed for 3 to 5 minutes to even distribute lubricant. NOTE: DO NOT over lubricate running deck. Any excess lubricant that comes out should be wiped off. Thank you for your interest in our products and we are looking forward to your purchase! Have a wonderful day. Best Regards, ADVENOR Fitness Dean
Question:	Does this fit a makita rj03 ? Thanks
Answer:	Hello Customer, Thank you for your inquiry. For this item, please kindly pull out the safety pin, and continue to click P + M simultaneously for about 5 seconds, the number on the lower right will change to 0.6 and you are at the miles mode. If you click again, it will change to 1.0 and this is km. Hope this resolves your concern. Have a wonderful day! Best Regards, ADVENOR Fitness Eric

Product description

Recap Bled 6" 8TPI

• Sold on

User questions & answers

Question:	How many teeth per inch
Answer:	No
Question:	Will it be able to cut through 3 inch square tube 1/4in wall
Answer:	Thank you for your question. Our treadmill is specially customized for American guests, so the voltage is in line with the American voltage requirements.
Question:	Will it cut through painted metal well or will paint gunk it up so that it won't cut
Answer:	I oiled it when I got it and oil it after 30 hours of use.
Question:	Can this cut 1/2 rebar at grade on a 6 x 6 tie and stay sharp with some dirt? The rebar is between ground and 1st course and spikes on the second
Answer:	Thanks for your question. The width of our treadmill is 22.44", and the width of your table legs is larger than 22.44".

Product description

Freud DS0908CF Steel Demon Carbide-Tipped Reciprocating Blades for Thick Metal Cutting, 9"

• High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16" to 9/16"
• Enhanced carbide tip to blade connection for extreme impact resistance
• 1 in. oversized blade body for straighter cuts with less vibration
• Single Blade
• Imported

User questions & answers

Question:	How long will the blade take to cut 4" hub cast iron pipe? the extra heavy variety
Answer:	I'm not sure as I don't have a pneumatic reciprocating saw. The connecting ends do fit all tool less blade connectors on traditional electric saws. Sorry I don't have the specifics for pneumatic tools.
Question:	Is this strong enough to through the steel cables in a car tire
Answer:	Yes, it cuts through that type of metal.
Question:	anyone used this to cut cement backer board? looking to cut some holes for the faucets in a shower
Answer:	Compared to other brands these are the best I! I don’t know how to put it but I’ve never seen any other blade manufacturers make a blade then make another that wud b better ! But I can say there regular blades tell you there 5 times better than a regular one and the carbide ones tell you there 50 times better . Wow that’s crazy good ! Ive had nothing but a great experience with these blades they bend a still keep on cutting. I curantly keep my old ones and make knife blades outta them the metal is just to good to throw away ! The steel comes from Sweden there one of the leading manufacturers of high quality steel , id say all in all what the sa they are in life is close to right but it cud b off one way or the other a little bit . The thing I can tell you is the dag gone things are tuffer than any other blade I’ve used and last longer break less ! I can’t see any other reason to buy other blades they won’t let you down !
Question:	Does this blade have the ability to do a bit of side flexing to cut up under a floor plate secured to concrete floor to get to and cut off a nail
Answer:	These blades usually fit any standard battery driven reciprecating saw. Does your makita fit any other branded blades if so it would fit diablo

Product description

Freud DS0909CGP3 Diablo 9" Carbide Tipped General Purpose Reciprocating Blade 9-6 TPI (3/32"-1/4") (3 Pack)

• Carbide tooth design for up to 50X cutting life in wood and metal applications
• Patented variable tooth technology provides faster cuts with less vibration
• Unique plunge tip design that enables faster and easier plunging in wood
• Perma-shield Non-Stick coated for less gumming and friction
• Quantity: 3 per pack

User questions & answers

Question:	Can you cut tiers with these blades
Answer:	8 teeth per inch,it is for steel 3/16 to 1/2 inch thick
Question:	Will it work on porter cable sawzall
Answer:	If you are talking about regular steel (not case hardened or something like that), my best guess would be yes. I was cutting through 4" cast iron sewer pipe in my mothers 75 yr old house with ease!
Question:	Where are they made
Answer:	In my experience the heat from cutting burned the paint off and it didn't stop it from cutting.
Question:	What does the protection plan cover exactly
Answer:	I would think so I cut through 1 1/4" hardened steel automotive drive axle in about 3 minutes and it's still sharp. I doubt the dirt would hurt unless it is made from really hard rock. It is truly a nice blade, pricey though.

Product description

Diablo's new steel Demon carbide reciprocating blades feature 10 TPI and are designed specifically for cutting medium metals and high strength alloys.

• High performance Carbide for greater durability and 50x cutting performance in medium metal applications
• Enhanced Carbide to blade connection for extreme impact resistance
• 10 TPI tooth geometry for clean/smooth finishes on medium metal applications
• Perma-shield Non-Stick coating for less heat and friction
• Quantity: 3 per pack

User questions & answers

Question:	will these blades cut wood
Answer:	It will do it but not the ideal blade for that purpose. I would choose the Freud DS1214AFC5 Flush Reciprocating Blade, 12". These are made to flex and are thinner.

• [Carbide Technology] Up to 50x longer life than bi-metal reciprocating saw blades
• [Cut All Woods] 3 teeth per inch and state-of-the art carbide technology ensures effective cutting of all wooden materials, regardless of density and hardness
• [Ultimate cutting performance] Productivity, robustness and long life, ideal solution for toughest jobs on the construction site.
• [Design for Toughest Materials] Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength needed for heavy duty demolition work
• [Blade Dimension] 12-inch 3 TPI all woods cutting , 1/2 universal shank fits all major sawzall saws such as Bosch, Milwaukee, Black&Decker, Hitachi, Makita, Metabo, Dewalt, Porter Cable, Skil, Rockwell etc.

User questions & answers

Question:	Does it stay sharp when cutting roots in dirt
Answer:	I don't know of any protection plan. It's an inside job. Someone at the Amazon distribution center is emptying packages and sending to customers. Check the reviews of the center, multiple people receive empty envelopes. Amazon should do something.
Question:	Does the blade fit Milwaukee saws
Answer:	2 minutes! Used it today on xtra heavy 4” wye, like butter, and of course it cuts cast even shows a picture of cast iron pipe on the blade!🤣
Question:	Will these cut bone
Answer:	I tried cutting the steel belts on a large motorcycle tire with a blade similar to this one by Milwaukee and it wouldn't cut the belts in the bead. I ended up having to use a large gold cutter. Once the cable in the bead was cut with the bolt cutter, the blade did cut throught he steel belts quite well. I would assume that you should experience about the same thing with this blade. Cutting those bead cables is really difficult without a bolt cutter or similar tool. Even an cut-off wheel didn't work.
Question:	Why do you say it has 10x the life of a Bi-metal blade, and also 50x
Answer:	I think this blade would have no problem cutting your backer board. Mine have cut through nails, buried sandstone pebbles, all kinds of wood, tree roots and hard soil and ther’re Still in usable condition.

Product features

Cover more Applications

Thick soft and hard wood

Thick exotic wood

Thick green wood and branches

Thick firewood Thick wooden roots

Carbide Blade for Wood Application

Ultimate cutting performance, greater durability & superior life in both wood and metal cutting applications allowing you to cut more on the jobsite.

Extra-Long Life Reciprocating Blade

High quality carbide teeth supplies up to 50x longer life than bi-metal reciprocating saw blades on hard materials.

Suitable Application

3 teeth per inch and state-of-the art carbide technology ensures effective cutting of all wooden materials, regardless of density and hardness.

Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength needed for heavy duty demolition work.

Product description

Freud DS0609CGP3 Diablo 6" Carbide Tipped General Purpose Reciprocating Blade 9-6 TPI (3/32"-1/4") (3 Pack)

• Carbide tooth design for up to 50X cutting life in wood and metal applications
• Patented variable tooth technology provides faster cuts with less vibration
• Unique plunge tip design that enables faster and easier plunging in wood
• Perma-shield Non-Stick coated for less gumming and friction
• Quantity: 3 per pack

User questions & answers

Question:	do the blades work for fiber cement siding
Answer:	My packet of 3 blades says, on the back at the bottom, "Made in USA".

• [Carbide Technology] Up to 50x longer life than bi-metal reciprocating saw blades
• [Heavy Metal Application] 8 teeth per inch teeth design is ideal for cutting all kinds of metal in demolition applications, e.g. high-alloy construction steels, stainless steels, rebar and car beams
• [Ultimate cutting performance] Easy to cut advanced materials where bi-metal blades fail quickly, such as stainless steels, high-alloy steels or hardened steels.
• [Design for Toughest Materials] Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength needed for heavy duty demolition work
• [Blade Dimension] 6-inch 8 TPI metal cutting (3/16 in. -1/2 in. ), 1/2inch universal shank fits all major sawzall saws such as Bosch, Milwaukee, Black&Decker, Hitachi, Makita, Metabo, Dewalt, Porter Cable, Skil, Rockwell etc.

Product features

Suitable for Various Brand Tools

Blade Material: carbide Teeth Per Inch: 8TPI Total Length: 150mm/6'' Cutting Length: 100mm Shank fits: Bosch , Dewalt , Milwaukee , Makita , Hitachi , etc.

Carbide Blade for Every Application

Ultimate cutting performance, greater durability & superior life in both wood and metal cutting applications allowing you to cut more on the jobsite.

Extra-Long Life Reciprocating Blade

High quality carbide teeth supplies up to 50x longer life than bi-metal reciprocating saw blades on hard materials.

Product description

Diablo's new steel Demon carbide reciprocating blades feature 10 TPI and are designed specifically for cutting medium metals and high strength alloys.

• High performance Carbide for greater durability and 50x cutting performance in medium metal applications
• Enhanced Carbide to blade connection for extreme impact resistance
• 10 TPI tooth geometry for clean/smooth finishes on medium metal applications
• Perma-shield Non-Stick coating for less heat and friction
• Quantity: 3 per pack

Product description

Freud DS0903CP3 Diablo 9" Carbide Tipped Pruning Reciprocating Blade 3 TPI-Fast Wood (3 Pack)

• Carbide tipped cutting edge for up to 50X cutting life versus standard pruning blades
• Ultimate cutting performance in clean wood and pruning applications
• Aggressive Carbide tooth geometry delivers fast and effortless cuts
• Large blade gullets between teeth provide fast chip removal
• Quantity: 3 per pack

User questions & answers

Question:	can you please tell me if the blades loose or are they in a plastic
Answer:	Don't know how they compare to other blades. However, I notched and trimmed 26 poles and cut several lambeams building my garage and haven't worn out that blade yet.
Question:	Are these better than the other Diablo pruning blades that are fleam ground teeths
Answer:	They can , I tried it . But it would be a waste to do so , it's not their primary use and they cut mild steel like butter. Why dull them in wood ?
Question:	Are these blades made in the usa
Answer:	I am sure you can
Question:	would this work better than a "general purpose" blade for cutting dried hard wood (such as oak or bay
Answer:	Ya they will fit any Sawzall mine is a skill sawzall with with a quick attach these are demolishen blades they will go through anything from steel to sheet rock one of the best blades I've used Dewalt makes one similar but it doesn't hold up like these blades

Product description

Diablo's pruning and fast clean wood blades have an aggressive carbide tooth geometry for increased productivity in pruning and clean wood cutting.

• Carbide tipped cutting edge for up to 50X cutting life versus standard pruning blades
• Ultimate cutting performance in clean wood and pruning applications
• Aggressive Carbide tooth geometry delivers fast and effortless cuts
• Large blade gullets between teeth provide fast chip removal
• Quantity: 3 per pack

User questions & answers

Question:	How many teeth per inch
Answer:	Yes
Question:	what is the thickness of this? I will be cutting roots trail buildi and trying to find the best length and thickness. Is 12" too long and will bend
Answer:	I didn’t use glue or tape. It is fairly heavy and the rubber does not slide on the cement of the garage floor.

Product description

DB CARBIDE 4 8TPI 3PK SENS

• DB CARBIDE 4 8TPI 3PK SENS
• DB CARBIDE 4 8TPI 3PK SENS
• DB CARBIDE 4 8TPI 3PK SENS
• DB CARBIDE 4 8TPI 3PK SENS
• DB CARBIDE 4 8TPI 3PK SENS

User questions & answers

Question:	Will this work with Dewalt reciporcation saw
Answer:	Saw Type: Reciprocating Saw Use: Metal, Plastic, Wood
Question:	inch Carbide-Grit for cutting brick
Answer:	Yes, no problem but rocks/ stones will dull blade.
Question:	Will this cut hardie siding, both straight and curves
Answer:	Yes,this blades will fit all sawzalls with standard connectors. 1/2 universal shank fits all major sawzall saws such as Bosch, Milwaukee, Black&Decker, Hitachi, Makita, Metabo, Dewalt, Porter Cable, Skil, Rockwell etc.
Question:	Can this cut carbon fiber cleanly
Answer:	Cuts through metal and wood. Have not had a reason to cut through bone. So many jokes there.

Product description

LENOX LAZER CT carbide tipped reciprocating saw blades deliver up to 50X life for the highest performance in metal cutting applications.

• Carbide Tipped for the Highest Performance in Metal Cutting Applications
• UP TO 50X LIFE: High performance carbide is welded to the cutting edge for durability and to help prevent tooth loss
• FAST CUTS IN DEMANDING METAL CUTTING  APPLICATIONS: Titanium coating makes teeth more wear resistant so they stay sharp for quicker cuts
• STRAIGHT CUTS IN LARGE DIAMETER MATERIALS: Tall, thick blade profile designed to help deliver straight cuts and long life
• ENGINEERED FOR PERFORMANCE: Each tooth is precision ground to cut through a wide range of metals including steel pipe, cast iron and stainless steel