3 best jigsaw blade for metal

Jigsaw blades for metal are specialized cutting tools designed to be used with a jigsaw, a power tool commonly used for making curved or intricate cuts in various materials, including metal. These blades are essential for tasks that require precision and versatility when working with metal sheets, pipes, or other metalwork.

Here is what you need to know about jigsaw blades for metal:

Material Compatibility: Jigsaw blades for metal are constructed with materials that can withstand the rigors of cutting through metal. They are typically made from high-speed steel (HSS) or bi-metal. Bi-metal blades have a toothed edge made of high-speed steel attached to a flexible and durable body, providing a combination of sharpness and resilience.
Tooth Design: Metal-cutting jigsaw blades feature specific tooth designs optimized for cutting through metal.These teeth are typically smaller and finer compared to blades designed for wood or other materials. Some blades may have additional features like T-shank profiles for easy and secure attachment to the jigsaw.
TPI (Teeth Per Inch): The TPI of a jigsaw blade refers to the number of teeth per inch along the cutting edge. Blades for metal cutting often have a higher TPI count, which allows for smoother and more precise cuts in metal. A higher TPI count also helps reduce the risk of blade binding during the cutting process.
Cutting Thickness: Jigsaw blades for metal come in various thicknesses to accommodate different metal thicknesses and types. It's essential to select the appropriate blade thickness for the specific metal you intend to cut. Thicker metals may require heavier-duty blades.
Cutting Speed: When using a jigsaw blade for metal, it's important to control the cutting speed. Slower speeds are often recommended for cutting metal to ensure accuracy and prevent overheating of the blade.
Safety Precautions: When working with jigsaw blades for metal, wear appropriate safety gear, including safety glasses and gloves, to protect yourself from metal shards and sparks. Additionally, ensure that the workpiece is securely clamped or held in place to prevent it from moving during cutting.
Maintenance: Proper maintenance of your jigsaw blades is crucial to ensure their longevity and performance. Clean the blades after use to remove any metal debris and store them in a dry place to prevent corrosion.

Jigsaw blades for metal are valuable tools for metalworkers, DIY enthusiasts, and professionals who need to make precise and intricate cuts in metal materials. Choosing the right blade for your specific metal-cutting needs and using it correctly will help you achieve clean and accurate results in your metalworking projects.

Below you can find our editor's choice of the best jigsaw blade for metal on the market

Bosch T-Shank Multi-Purpose Jigsaw Blades, 10 Piece, Assorted, Jig Saw Blade Set for Cutting Wood and Metal (T5002)

BOSCH

Based on 4 reviews Check latest price

Product description

Assortment includes blades for general-purpose wood cutting, and varied thicknesses of metal (ferrous and non-ferrous) and plastics. Set includes T101B clean for wood, T144D speed for wood, T119BO basic for wood, T118A basic for metal, and T118B basic for metal blades. Includes durable plastic case for blade storage. T-shank design for maximum grip and stability which fits over 90% of current jigsaw makes and models.

From the Manufacturer

This assortment of blades adds function and affordability to your jigsaw blade needs. Compatible with most competitor's jig saws. These blades eliminate the need to set the screw in a mounting hole to reduce breakage. They are crafted to the durable Bosch standard The set includes two each of T101B, T119BO, T144D, T118A, and T118B jig saw blades.

COMPATIBLE: Compatible with over 90 percentage of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter cable, and craftsman jigsaws, the T5002 is a versatile addition to any tool set
COMPATIBLE: Compatible with over 90% of current jigsaws including Bosch, Dewalt, Hitachi, Makita, Milwaukee, Metabo, Porter-Cable, and Craftsman jigsaws, the T5002 is a versatile addition to any tool set
COMPLETE: The blade set includes two each of T101B clean for wood (4'', 10 TPI), T119BO basic for wood (3-1/4'', 12 TPI), T144D speed for wood (4'', 6 TPI), T118A basic for metal (3-5/8'', 17-24 TPI), and T118B basic for metal (3-5/8'', 11-14 TPI) jig saw blades. The T5002 is the ideal set for or general-purpose woodworking and thick or thin metals (ferrous and non-ferrous)
CONVENIENT: The t-shank design of these blades provides maximum grip and stability and eliminates the need to set the screw in a mounting hole to reduce breakage
DURABLE: Crafted to the durable Bosch standard, the T5002 also comes complete with a durable plastic case for blade storage
This assortment of blades adds function and affordability to your jigsaw blade needs
Eliminates the need to set the screw in a mounting hole to reduce breakage
Crafted to the durable Bosch standard

User questions & answers

Question:	Can these blades be used for plunge cuts
Answer:	Hello Pete A. I've had good luck with this blade. I haven't tried Fence Pipe. However if it's 3/16 in. thich it should be no problem. What you need to realize is this saw blade turns at low speed upon the saw it was made for. with few teeth and the slow speed, it becomes imperative to have the work very securely held.if it moves it can cause the blade to hang up momentarily and break off several of the teeth. Your $100 blade is then History. I did this and had to replace it. Also use no lube and try to hold the saw feed arm very solidly in your grip. Feed it slowly, you'll be able to feel the vibration, especially as it starts cutting. Pay attention to the instructions as to holding the work. If used properly it'll last a long time, but don't force it as one would do with a chop saw. I've cut 1/2 x 3 angle with no problem. It's not intended for non ferrous metals, such as aluminum---------Good Luck ! Al
Question:	I have the ryobi cordless jigsaw that uses t shank, will this work
Answer:	I have been in tool repair for many years and the answer to you question is that you really shouldn't. There is typically a 3 to 600 rpm difference in a traditional chop saw vs a cold cut metal saw. As well as the difference in the size and strength of the gears and bearings internally. A number of things can very likely go wrong. The simplest being breaking gear or premature bearing failure. They could be as bad as a tooth on the blade catching your work piece and bucking hard enough to seriously hurt someone. That's my two cents
Question:	Others have bought these blades for the B&D Piranha, so I assume they're compatible? Does this set include wood, metal & plastic (PVC) blades
Answer:	Yes you can. We cut .20-.25" wall pipe every day with this blade. 2-3/8" to 3-1/2" OD pipe.
Question:	Are these bimetal blades
Answer:	If the arbor is the same . it will cut pipe, and by rights , should cut a lot more than the 10 cuts you need, now if you are asking if, it will make that cut in one stroke. you would have to measure the amount of exposed blade expected that is not encumbered by saw parts.

LENOX Tools 1991563 U-Shank Thick Metal Cutting Jig Saw Blade, 3 5/8" x 3/8" 14 TPI, 3 Pack

Lenox Tools

Based on 115 reviews Check latest price

Product description

LENOX Tools 1991563 U-Shank thick metal cutting jig saw blade, 3 5/8-inch X 3/8-inch 14 TPI, 3-pack provides users with improved blade durability and long life in thick metal. Power blast technology® strengthens the blade to reduce breaks and increase durability. Patented T2™ technology provides fast, efficient cutting in a range of metal cutting applications. Bi-metal technology flexes to resist breaking and extend blade life.

Power blast technology increases durability. High speed blasting strengthens the blade to reduce breaks and increase durability.
Long blade life. Patented T2 technology provides fast, efficient cutting in a range of metal cutting applications
Shatter resistant. Bi-metal technology flexes to resist breaking and extend blade life
Item Package Dimension: 6.875" L x 2.313" W x 0.23" H

User questions & answers

Question:	Will these fit a black n decker js660 type2 5a
Answer:	no

Skil 94907 Jig Saw Blade Set for Fast and Smooth Cutting in Metal, 5 Piece

Skil

Based on 186 reviews Check latest price

Product description

SKIL general multi-purpose 5-piece set includes blades for various metal cutting applications. Ideal for straight-line and fast cuts. Efficient and economical for DIY users. U-shank design.

5-piece metal cutting set
For fast and smooth cuts in aluminum and other non-ferrous metals
Includes 2 blades for fast cuts in metal, 2 blades for smooth cuts in metal and 1 blade for smooth cuts in thin metal
High speed steel construction for maximum life in metal cutting

User questions & answers

Question:	will it work on skil 4232 jig saw
Answer:	Yes, the 94907 SKIL jigsaw blade set is compatible with the SKIL 4232-01. The 4232-01 only accepts U-Shank style blades.
Question:	Will these fit a black n decker js660 type2 5a
Answer:	Thanks for the question! These blades are compatible with any jigsaw that accepts T/U or U shank blades.
Question:	Is this compatible with the 4290-02? Can these blades cut nails/screws
Answer:	The blades in this kit are suitable for cutting both nails and screws. These blades are compatible with the SKIL 4290-02 jig saw since it accepts both T and U shank blades. Thank you for the question!
Question:	How many Teeth Per Inch
Answer:	Hello, As this is a multi-pack of different blade there are 3 different blade with their own TPI. For further information regarding the blade specs please contact our Customer Support line at 1-877-754-5999. Thank you for your inquiry!