14 best bosch high chairs

Product description

Bosch state-of-the-art turbine fuel pumps offer many advantages when compared to older roller-cell and inner-gear pump designs. Not only do these pumps offer near silent operation and improved drivability, the core components of this turbine design significantly reduce wear and deliver a longer service life. That's an important consideration when choosing a replacement fuel pump. You can install Bosch Turbine Fuel Pumps with complete confidence. They're nearly identical in dimension and appearance to the units they replace for a precise fit every time. Plus, application-specific, illustrated step-by-step instructions are included with all Bosch Turbine Fuel Pumps for safe and easy installation.

• Responsible for compressing the fuel supplied by the electric fuel pump to the pressure required for high-pressure injection up to 20 MPa (200 bar)
• Integrated pressure limiter valve
• Compact, light-weight design
• Integrated pressure damper capable of variable feed pressure

Product description

Bosch 1617EVS wood router tool kit 12 amp 2 1/4 Horse power fixed base hand router with 1/4 inch and 1/2 inch collets. Case type: Hard plastic. Double insulated.

Handle a broad range of routing applications with the versatile Bosch 1617EVS Variable-Speed Router. This router kit includes a powerful motor with advanced speed-control technology, a fixed base for upright use or use in a router table, and plenty of high-performance features to help you get a variety of jobs done quickly and accurately.

• 12 Amp router motor - Combines ample power with adjustable speed settings, allowing users to glide along cutlines
• Adjustable speed dial (8000-25,000 RPM). 2 inch sub-base opening
• Fixed base has threaded holes for mounting to router table positioned in common 3-hole pattern
• Now includes RA1161 fixed-base with system for adjusting bit height from above a router table
• Compatible with optional RA1129 template guide adapter set – For easy change of Bosch quick-release template guides and common threaded template guides; Includes RA1126 template guide adapter and RA1100 interface for threaded template guides

User questions & answers

Question:	I have a porter cable 4216 dove tail jig does this work with it or do i need to purchase optional bases with it
Answer:	I am not sure about that but with enough duct tape, screws, epoxy, and good old American ingenuity, anything is possible! Seriously though, i know there are multiple screw holes in the base plate, but whether or not they will line up to your Porter cable jig, i am not entirely sure. I do know this is a great router, its the first one I have owned, but not the first I have used. Plenty of power for bigger bits and smooth precise adjustments, easy to handle and manipulate. Quieter than alot of others I have used.
Question:	Is this router available in Europe in 220 Volt
Answer:	We have just purchased a (GOF 1600 CE) router from Bosch. This router is 220 volts and came with two bases. This router will not operate in a conventional router lift, as the power switch is on the handle and not on the motor. The unit was supplied with two bases, one plunge base and one non plunge base. The non plunge base may be used to mount the router to a table. Is what Bosch needs, is a kit to make the router work in a proper router lift.
Question:	Is it made in USA
Answer:	Thank you for your question. The Bosch 1617EVS router is manufactured in Mexico. Robert Bosch Tool Corporation utilizes a global manufacturing strategy, which incorporates a global network of suppliers with our worldwide manufacturing locations in countries such as Germany, Mexico, Switzerland, China and the United States. Our manufacturing facilities around the globe are all owned and operated by the Bosch Group and maintain the highest quality standards. You can be assured that whatever country your Bosch product was made in, it will be made with the quality you would expect from Bosch.
Question:	With ra1181 table, do you need ra1165 under table base for over table adjustment if buying 1617evs router? description implies it is not needed
Answer:	You do not - need - to buy it. However, you may still want to buy it if you plan to use the router above table. To eliminate the hassle of installing the router’s base which comes with the router (with the two handles) under the router table, and later having to convert it back for non-table use, Bosch offers the optional RA1165 under table Router Base. The RA1165 base (that is sold separately) is designed to be permanently attached your router table, leaving the router base that comes with the router ready for non-table use. Wish other router manufactures got smart and did this too.
Question:	Will this router run on 220-240V power, or only
Answer:	The router requires 110V
Question:	is it made in usa or china
Answer:	No.....Mexico
Question:	What kind of router bits are good for this router ? Or are any compatible
Answer:	This router has both a 1/4" and 1/2" collet so it will accept both size shank bits. I prefer the buy 1/2" shank myself especially in larger bits, they are a little more expensive but seem to run better and last longer. When it comes to brands of router bit Freud is always the first place I shop. I have also had really good success with CMT and Bosch because my local big box store doesn't carry Freud. One thing I will saw about router bits is its always better to buy quality bits they will last for years and produce better results. Amazon has some nice bits sets that come with a lot of common bits that are nice for a person new to the router.
Question:	Can anyone explain the difference between this kit DW618PKB and the DW618PK kit? Are the routers / bases the same
Answer:	They are both the same tools. The only difference is that DW618PK includes a hard plastic case. Whereas, the DW618PKB includes a cloth carrying bag.

Product features

Accuracy

This versatile kit provides all the components necessary for fixed-depth routing.

Top Tier Power

Among the most powerful routers for woodworking at 12-amps, 2.25-horsepower, and 8,000-25,000 RPM.

Versatility

The hand router’s variable speed dial allows you to set the optimal speed

One Button Operation

The power switch is completely dust-sealed for added durability.

Product description

The Bosch RA1181 bench top router table provides a large work surface for woodworking and routing. Designed to fit a variety of routers, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. Its 2 1/2 inch dust collection port offers better dust collection for a cleaner work environment. The large aluminum top makes the table both durable and portable. This bench top router table includes mounting hardware, features a tall aluminum fence with adjustable MDF face plates, two out feed shims, and an aluminum router mounting plate. The starter pin and guard for router curved work pieces is also included, in addition to the built in cord wrap for convenient storage and portability.



Works with:



Bosch: 1613-Series and 1619EVS Plunge Routers; 1617-Series and MRF-Series Routers (in fixed base only)

Craftsman: Most Craftsman 1/2"-Collet Routers

DeWalt: DW616 and DW618 Routers (in fixed base only) Hitachi: M12VC Routers Makita: RF1100 and RF1101 Routers Milwaukee: 5615 and 5616 Routers Porter-Cable: 690-Series and 892-895-Series Routers (in fixed bases only) and 7529 Plunge Router Ryobi: R161, R162, R163, RE170 and RE180 PL Routers Skil: 1810, 1815, 1820 and 1825 Routers Template Guides: The RA1181 does not accept any template guides. Vacuum Hoses: Common 2-1/2" Vacuum Hoses attach directly to the RA1181. Vacuum Hose Adapter for 35 mm Hoses, such as Bosch 35 Hoses: VAC004.

• Benchtop router table design – Features a large aluminum top for extended work area, durability and precision
• Rigid aluminum mounting plate – Pre-drilled for compatibility with a variety of routers and for above-table height adjustment
• Extra tall aluminum fence – Has adjustable faceplates and feather boards to maximize precision and versatility
• Dedicated standard dust-collection port – Fits standard 2-1/2 inch vacuum hoses for debris-free operation to help keep your work area clean
• Easy-to-use adjustable feather boards – Attach to fence and table, providing additional guidance and kickback protection
• Accessory slot – Accepts feather boards and 3/4 inch optional accessories such as a miter gauge
• Storage pocket – Allows storage of router accessories
• Cord-wrap storage – Stores 6 foot power cord

User questions & answers

Question:	can a router lift be attached
Answer:	As far as I can tell, the bundle includes everything, but the kit does not include the ring set. However, the ring set is available for $19.11, which makes adding it on to the kit cheaper than the bundle right now.
Question:	Would this work with a milwaukee 5616 router
Answer:	Yes you can buy the pre drilled router plate for that router
Question:	Can I mount this table to a different base? I want a router table that mounts on a taller stand, rather than a bench top unit
Answer:	quick look at the woodpecker top looks like the t tracks are to close together, and the jessum track size is proprietary.
Question:	can you provide list of routers that fit without modifications
Answer:	If the table width is 32 than yes.

Product features

Bosch RA1181 Benchtop Router Table

The Bosch RA1181 benchtop router table provides a large work surface for precision and versatility. The large aluminum top makes the table both durable and portable. Designed to fit a variety of routers, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. Its rigid aluminum router mounting plate is pre-drilled for compatibility with a variety of routers and for above table height adjustment with many common routers. Its 2-1/2 In. dust-collection port offers better dust collection for a cleaner work environment. This benchtop router table includes mounting hardware, features a tall aluminum fence with adjustable MDF faceplates, two outfeed shims, and an aluminum router mounting plate. The starter pin and guard for routing curved workpieces is also included, in addition to the built-in cord wrap for convenient storage and portability.

Large Aluminum Top

For extended work area, durability, and precision.

Aluminum Mounting Plate

Pre-drilled for compatibility with a variety of routers and for above table height adjustment with some routers

Extra Tall Aluminum Fence

With adjustable MDF faceplates and featherboards to maximize precision and versatility.

Dust Collection Port

To help keep your work area clean.

Product description

The Bosch RA1054 Deluxe Router Guide greatly expands the versatility of Bosch routers. It makes it possible to do edge forming using non piloted bits, and guides cuts along the work-piece edge or up to 8 inches from the edge. Standard equipment includes dust extraction hood and vacuum hose adapter that allows connection to 1 1/4 inch, 1 1/2 inch and 35mm hoses.

From the Manufacturer

The Bosch RA1054 Deluxe Router Guide greatly expands the versatility of Bosch routers. It makes it possible to do edge-forming using non-piloted bits, and guides cuts along the work piece edge or up to 8 inches from the edge. Standard equipment includes dust extraction hood and vacuum hose adapter that allows connection to 1-1/4-inch, 1-1/2-inch and 35mm hoses. The RA1054 also includes a pivot plate and can be easily converted into a circle guide for making circles and arcs up to 32 inches in diameter.

• Adjustable: Features precision fine adjustment control works with following products: MRF01, VAC006, MRF23EVS, VAC021, 1618EVS, 1617, 1617EVSTB, 1617EVSPK, MRP23EVS, 1619EVS
• Versatile: The Bosch RA1054 Router Guide adds to the versatility of Bosch routers as the guides cut along the work piece or up to 8 inches in from edge; You’ll also have the freedom to do edge forming using non piloted bits
• Convertible: The router guide quickly and easily converts into circle guide for making arcs and circles up to 32 inch in diameter
• All in 1: Includes router guide, pivot plate, dust extraction hood, vacuum hose adapter, attachment hardware
• Guaranteed: You can feel secure with your purchase with Bosch’s 1 year limited warranty

User questions & answers

Question:	I'm wondering if this will work on a makita rp2301fc
Answer:	Thank you for your question. The RA1054 is manufactured to fit our Bosch routers, we have not tested any other manufactures to know compatibility. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Has anyone used this with a Porter Cable 7518 fixed router? Compatible
Answer:	I cannot answer for the PC 7518, but have adjusted to work with the PC 890 Series plunge base. Adjustments included use of the Bosch 1/4-IN rod sleeve guides, purchased 1/4x36-IN steel rod (halved), shape filed rod ends to fit PC 1/4-IN anchor holes, set screws and prepared1/8-IN thick Lexan base plate to fit (rod anchor height need). BTW, no rod adjustments needed with use of 3/16-IN steel rod though stayed with 1/4-IN rod as Bosch edge guide had 1/4-IN rod capacity. Note: As stated by Bosch, comparability not tested. This works well.
Question:	Will this work with MRC23EVSK
Answer:	Whoa! Edward B. Blackman puts the "tired" into retired. Again. Nice work.
Question:	Length of guide rods? I would like to fit 2 of the edge guides on the same rods to sandwich a narrow piece of stock between to create a mortise
Answer:	I bought a 4' length of 3/8" rod from Home Depot and cut it in half, so each of the 2 rods is 24" which works perfectly.

Product features

Deluxe Router Guide

Easily converts into circle guide for making arcs and circles up to 32 In. in diameter. Unit includes pivot plate, dust extraction hood, vacuum hose adapter and attachment hardware. Fits models 1613, 1617, 1618, 1619 and MR23EVS series routers and bases plus PR011 palm router plunge base.

Product description

The Bosch BC1880 18-Volt Fast Charger gets the user power ready in a hurry. It can fully charge a spent 18-Volt 6.0 Ah battery in 55 minutes and 18-Volt 2.0 Ah SlimPack battery in 25 minutes. It has fast-charging, so that it can charge the 6.0 Ah battery to 80 percent in only 35 minutes and the 2.0 Ah battery to 80 percent in just 15 minutes. This charger was designed with battery-protection systems. One is the regulated dual-mode charge – the first 80 percent of the charging is very fast, while the remaining 20 percent is in long-life mode. Another is a cooling fan to preclude cell overheating while charging. Compatible with all Bosch 18-Volt SlimPack and FatPack Lithium-Ion batteries, this charger allows users of the Bosch Flexible Power System to use (with little downtime) a wide variety of powerful tools – drill drivers, impactors, reciprocating saws, circular saws, oscillating tools and more. The BC1880 provides a charging status indicator. Includes: BC1880 18-Volt Charger

• Fast-charging to 80 percent – will fast-charge an 18 V 6.0 Ah FatPack battery in only 35 minutes, and a 2.0 Ah SlimPack in only 15
• Works with high-amp batteries – fully charges a spent 18 V 6.0 Ah FatPack battery in about 55 minutes
• Fast charging with standard cells – fully charges a spent 18 V 2.0 Ah SlimPack battery in 30 minutes
• Cooling fan – protects batteries from overheating while charging
• Regulated dual-mode charge for cell protection – fast charge to 80 percent, remaining 20 percent is long-life mode

User questions & answers

Question:	Is this also charge the 36v batteries? like Bosch BC
Answer:	Not sure, but would suggest that if she has very narrow feet stick to the men 8 1/2.
Question:	How many watts is the battery charger? I ask because I need to buy a 240v to 120v power converter, and the power converter come in all different sizes
Answer:	our experience is with soccer specific shoes and we find that of the major vendors that underarmour cleats tend to run narrowest, so you may wish to search on that basis.
Question:	Is this compatiable with gba18v63? is there 220v model for this
Answer:	Yes, these are typically used for indoor soccer. However, I use them for boxing training. The bottom of the shoe is completely flat which helps with my somewhat flat feet. They will slip and slide on certain surfaces, though.
Question:	is this 220 volts
Answer:	Yes it’s incorrect. They are women’s cleats! And they’re a great deal. My daughter loved them.

Product features

BC1880 18-Volt Fast Charger

The Bosch BC1880 18-Volt Fast Charger can charge a spent 18-Volt 6.0 Ah Lithium-Ion battery in approximately 55 minutes, and it is compatible with all Bosch 18-Volt SlimPack and FatPack batteries. This means that users of the Bosch Flexible Power System can, with little downtime, use a wide variety of powerful tools – such as drill drivers, impactors, reciprocating saws and more. The charger was engineered with battery-protection systems to power the cells safely, including regulated dual-mode charge for two-stage charging and a cooling fan. This charger provides a charging status indicator.

Includes

BC1880 18-Volt Charger

Works with high-amp batteries

Fully charges a spent 18-Volt 6.0 Ah FatPack battery in about 55 minutes.

Flexible charging solution

Compatible with all 18-volt Bosch lithium-Ion batteries.

Battery-charge indicator

Provides charging status and mode indication.

Regulated dual-mode charge for cell protection

Fast charge to 80 percent, remaining 20 percent is long-life mode.

Product description

The Bosch 2.25 HP plunge and fixed-base router kit is a versatile kit for a broad range of applications, including precise bit plunging, edge forming, slot cutting, laminate trimming and dovetail cutting. You can also use it with a router table. The kit features a 25, 000 RPM, 12 amp motor that delivers the power needed for smooth routing. Case type: Hard plastic.

Handle a broad range of routing applications with the versatile Bosch 1617EVSPK Plunge and Fixed-Base Variable-Speed Router Kit. This router kit includes a powerful motor with advanced speed control technology, precision bases, and plenty of advanced features to help get a variety of jobs done quickly and accurately.

• Versatile: This versatile kit can be used for a broad range of applications, including precise bit plunging, edge forming, slot cutting, laminate trimming and dovetail cutting; Making it one of the most widely used routers for wood working
• Durability: Aluminum construction makes this one of our most durable wood routers yet with wooden handles on a fixed base and a soft grip handle on a plunge base
• Ease of use: Rounded hardwood handles maximize user control
• Convenient: With the built in constant response circuitry, our 1617EVSPK wood router will maintain a constant speed throughout the cut, so you get cleaner, more accurate results
• Kit contents: Includes a plunge base, fixed base, 1/4 inch and 1/2 inch collet chucks, shaft wrench, collet nut wrench, chip shields and carrying case

User questions & answers

Question:	Why buy this one over the Dewalt 2.25hp kit? The Dewalt is $40 more, and usually Bosch is more expensive than Dewalt
Answer:	Hi, Peter. Thank you for your question about GoodSense Tussin DM. This product does not contain alcohol. If you would like additional information, please let us know and we would be happy to further assist you.
Question:	I read in one of the reviews, (current review) this router comes with a kit including carrying case, circle jig and an edge guide. Is this correct
Answer:	Yes, it can be shipped anywhere -- I think.
Question:	Is this product compatible with the bosch router table
Answer:	It is a two pack
Question:	if i were to mount this to a table, does this router provide a height adjustment from above the router table
Answer:	it depends what your description of natural is. None the less its tastes like any typical cold syrup medicine although i would recommend to go with the cherry or berry flavor they work just as well with out the bad taste. The original flavor can be harsh especially for kids and young adults.

Product features

Bosch 12 Amp 2-1/4 Combination Horsepower Plunge and Fixed Base Variable Speed Router Kit 1617EVSPK with 1/4-Inch and 1/2-Inch Collets

Variable speed dial, soft-start, maintains constant speed under load, quick clamp system on both bases, includes fixed base with system for adjusting bit height from above a router table, precision centering makes it easy to keep bit on intended cutline when using jigs, templates, dovetail fixtures and similar guidance devices, fixed base has threaded holes for mounting to router table positioned in Bosch 4-hole pattern and common 3-hole pattern, microfine, bit, depth adjustment system on both bases, wide base openings and 2" sub-base openings and provides better visibility, right or left.

Top tier Power

Among the most powerful routers for woodworking at 12-amps, 2.25-horsepower, and 8,000-25,000 RPM. The wood router’s advanced speed-control technology monitors and maintains desired RPM for consistent performance.

Flexibility

The hand router’s variable speed dial allows you to set the optimal speed for the routing task and material. Base Diameter: 6 inches Fixed/ 6-11/16 inches. Rounded hardwood handles maximize user control.

Durable and Comfortable

The motor housing and bases are made of aluminum, and the power switch is completely dust-sealed for added durability. This router is backed by a one-year limited warranty, 30-day money-back guarantee, and one-year service protection plan.

Accurate

This versatile kit provides all the components necessary for fixed-depth routing. Microfine bit-depth adjustment on the base, with an overall range of one inch and accuracy to 1/64 inch, allows for accurate and fast changes.

Product description

The cabinet style functionality, expanded and precise material support and a dual outlet switch make this the perfect solution for woodworkers in search of a quality benchtop router table for the shop.

The Bosch RA1171 Cabinet-Style Router Table provides a premium work surface for woodworking and routing. Designed to fit a variety of routers and able to mount on any workbench, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. And with its cabinet-style construction, it offers better dust collection and noise reduction for a more efficient work environment.

Designed for Versatility and Precision

Thanks to its versatile design, the RA1171 lets you work with a variety of materials while ensuring precision with every cut. With a tall aluminum fence measuring 4-7/8 x 25-1/8 inches (HxL), the table handles tall stock with ease. The fence also features adjustable MDF face plates for better support and smoother operation.

The rigid aluminum router mounting plate stays flat and true for precise, accurate cuts, and for added versatility, it's pre-drilled to fit a variety of routers.

The easy-to-use featherboards attach to the fence and table and are fully adjustable to fit a variety of workpieces. They provide additional support and control while feeding stock across the routing table.

Dust Collection Ports and Accessory Slot

The RA1171's cabinet-style design excels at dust removal. It features two dust collection ports for removing dust and debris, and they both fit standard-sized 2-1/2 inch vacuum hoses.

Use the accessory slot to add additional featherboards, as well as 3/4-inch optional accessories, such as any miter gauge measuring 3/4 x 3/8 inches deep.

The RA1171 Cabinet-Style Router Table measures 25-1/2 x 14-1/2 x 15-7/8 inches (WxHxD) and weighs 42 pounds. It has a maximum fence opening of 3-3/16 inches and a maximum throat opening of 3-5/8 inches. It is backed by Bosch's one-year limited warranty, 30-day money back guarantee, and one-year service protection plan.

What's in the Box

RA1171 Cabinet-Style Benchtop Router Table, set of three mounting-plate insert rings, mounting hardware, two adjustable featherboards, adjustable clear guard, starter pin and guard, and two 1/16-inch thick outfeed fence shims.

From the Manufacturer

The cabinet-style functionality, expanded and precise material support and a dual outlet switch make this the perfect solution for woodworkers in search of a quality benchtop router table for the shop.

• Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease; The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing
• Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy; For added versatility, it’s pre drilled to fit a variety of routers
• Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback; They’re fully adjustable to fit a variety of work pieces; Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge
• Clean up: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris; The dust collections ports fit standard 2 1/2 inch vacuum hoses
• Convenience: Featuring a dual outlet switch with 6 feet power cord; Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims

User questions & answers

Question:	compatible with Skil router
Answer:	Thank you for your question. Yes, the RA1171 is compatible with Skil routers. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	How much does it weight
Answer:	It's built with particle board. Very similar to melamine. I couldn't tell you the precise weight, but I would judge it (sans router) to weigh about the same as a case of whiskey. Six 1.75 mL plastic bottles.
Question:	Will my ridged r24012 fit
Answer:	Thank you for your question. The Bosch RA1171 router table will work with several manufacturers routers. We have not tested with any Rigid routers, however if your model does not match up with any of the holes in the mounting plate you can mark off and drill the needed holes to match up with your router. Most plunge routers are not designed to be used in a router table. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Is there an important difference between this table, and the Bosch RA
Answer:	The main difference is the cabinet which helps cut the dust down. The table top of this unit is laminated MDF which is not as durable as the metal top of the RA1181, however the plastic legs on the RA1181 are certainly not going to be as durable as the cabinet on this unit. I should also point out that while the table is made of MDF, the router plate is made of metal. Since that is where all the action is taking place, I fully expect this unit to last many many years. This unit has 2 dust ports, one behind the router bit and another in the cabinet itself. This really helps keep the dust down. the RA1181 will likely make a much bigger mess as all the stuff flies out of the bottom. The cabinet also serves as a handy place to store all the little goodies like feather boards, knobs, and whatnot. I have this unit and considered the RA1181 for a little while. I am 100% happy with the cabinet design and would certainly get it again. The only problem I have is that neither table comes with a miter guage. I added the POWERTEC 71005 guage to my table and it's awesome! It has a sturdy all-metal design and is a perfect fit for the miter slot in the table. Whichever table you get, I strongly suggest adding a miter guage

Product features

Bosch RA1171 Cabinet Style Router Table

The Bosch RA1171 Router Table features a cabinet-style design with a smooth laminated work surface for precision woodworking, making it an ideal benchtop solution for any workshop. The cabinet-style construction is ideal for stability, storage and dust collection. Its rigid aluminum router mounting plate is pre-drilled for compatibility with a variety of routers and for above table height adjustment with many common routers. The tall fence handles taller stock, and adjustable MDF faceplates and featherboards maximize precision and versatility. It also features a dust-collection port at the fence and one at the cabinet, for maximum dust management.

Cabinet Style Design

Ideal for stability, storage, and dust containment.

Aluminum Mounting Plate

Pre-drilled for compatibility with a variety of routers and for above table height adjustment with some routers.

Extra Tall Aluminum Fence

With adjustable MDF faceplates and featherboards to maximize precision and versatility.

Two Dedicated Dust Ports

One at the fence and one at the cabinet – for maximum dust reduction.

Product description

Projects 90 degree lines for squaring, with laser lines positioned in front of laser base for easy centering over point and precise adjustment. Bright, highly visible laser lines raise from the surface to project over uneven surfaces and are clear, sharp and very precise for all tile and wall/floor cover surfaces. Water and dust proof to ensure years of dependable operation (certified at IP54). Strong magnets on bottom of tool provide secure attachment on positioning plate and other ferrous metal surfaces. Class IIa laser product, <1mW power output.

From the Manufacturer

Wall and floor-covering laser.

• PRECISION: Accurately projects 90° lines for squaring tile, flooring layout, and walls. This laser square features lines that are positioned in front of laser base for easy centering over point and precise adjustment
• VISIBILTY: Bright, sharp, highly visible laser lines raise from the surface to project over and travel past uneven surfaces or obstructions; Exclusive switchable 45° line helps verify proper positioning of square tiles between 0° and 90°
• DURABLE: This robust layout laser able to withstand tough jobsite conditions; the rugged tool comes complete with soft carrying pouch
• SECURE: Features strong magnets on the bottom of laser tool that help fasten to the surface, to provide secure fixed attachment on included positioning plate and other ferrous metal surfaces
• EFFECTIVE: The GTL 3’s Bosch laser technology allows users to be more productive with greater job site accuracy and precision. Get the kitchen tile or bathroom tile layout done right.
• Laser Diode: Class II 635 nm, =1 mW

User questions & answers

Question:	Has anyone tried using this to install hardwood flooring? Can it draw a line half inch away from the wall
Answer:	Nope. Just shoes.
Question:	whats the distance the lazer runs
Answer:	Hi, The seam is diagonal.
Question:	is this ITEM MADE IN GERMANY
Answer:	size 7 in men
Question:	Are there any levels on the product (or mounting plate) to ensure a level line when using on walls? Or do I have to set a level on the laser line
Answer:	They arrived as black. Hope this helps.

Product features

GTL3 Tile and Square Layout Laser

Bosch GTL3 professional tile laser.

Includes: GTL3 Tile and Square Layout Laser, Laser Target, Belt Pouch, Versatile Steel Positioning Plate, AA 1.5V Batteries

Perfect Layouts

0° and 90° lines plus optional 45° layout line provides 0°, 45°, 90° and 135° layout from a single setup.

Versatile Positioning Plate

Steel positioning plate for versatile positioning of tool.

Magnet Attachment

Strong magnets on bottom of tool provide secure and adjustable attachment on positioning plate and other ferrous-metal surfaces.

Get It Right

Laser lines raise from the surface to project over and travel past uneven surfaces or obstructions.

The Job Just Got Easier

With Bosch laser technology, users are able to be more productive and more profitable – with greater accuracy and precision on the job site. By offering an extensive range of line lasers, laser measures, rotary lasers, point lasers, digital levels, optical levels and measuring tool accessories, Bosch is able to provide solutions for a wide variety of applications. With Bosch measuring tools, users are able to work smarter, not harder.

Product description

Bosch BS5618-15S 56-1/8-Inch by 1/8-Inch by 15TPI Wood Bandsaw Blade

From the Manufacturer

Bosch brand band saw blades are made from premium grade steel that resists heat buildup which provides long life for the blade. The unique tooth geometry is optimized for the best performance during cutting. A variety of sizes and types are offered to cover wood and metal applications. Bosch band saw blades are designed to fit most popular brand band saws, including 9-Inch and 10-Inch band saws.

• Made from premium grade steel
• Resists heat build up for longer life
• Optimized tooth geometry for best cutting performance

User questions & answers

Question:	What is the blade thickness
Answer:	If the point you're missing is the rod Between the Wheels, double-check and make sure it's not taped to the styrofoam.
Question:	Will this fit a Dela 3 wheel bandsaw
Answer:	exactly 60" (5') from floor to top of popper.
Question:	Need a scroll blade for WEN. 72”1/8” x
Answer:	I need parts too. The entire popping basket will not turn. Can’t get out popcorn that was in it. After about 7 months of use it doesn’t work and you can’t fix it. I even had a maintenance man try to fix it.
Question:	will this fit a 56 7/8" band saw
Answer:	Exactly 5 feet

Product features

Bosch Stationary Band Saw Blades

Bosch band saw blades offer precision-sharpened teeth for easy cutting of fine, intricate shapes. Available with different blade features and tooth designs for use in a variety of different applications.

Compatibility

Lengths to fit the most common band saw sizes.

Premium Materials

Resists heat build up for smoother operation and longer life.

Optimized Tooth Geometry

Provides the best performance in a variety of materials.

Precise Operation

Delivers clean and accurate cuts for fine woodworking applications.

Product description

The Bosch PS60-102 12-Volt Lithium-Ion Max Reciprocating Saw Kit with 1.5Ah High Capacity Battery, features a powerful 3,000 (SPM) motor. Fast Cutting- Significantly faster than a hand saw, as fast or faster than our competition. Compact- Small enough to reach into tight areas and corners. Fuel Gauge- Easier battery management for continued work. Comfortable Soft-Grip Top and Body- Multiple grip positions to prevent hand fatigue.

• COMPACT: The Bosch PS60-102 Reciprocating Saw is compact and lightweight making it ideal for working in tight spaces. Its superior ergonomics allow for both one-handed use and overhead use.
• ROBUST: The PS60-102 reciprocating saw is tough enough to cut different types of materials including hard materials like copper and conduit. The tool also featured a fast motor brake for more safe and accurate cutting.
• PROTECTION: The PS60-102 features a complete protection system including protection from overheating and overloading as well as under voltage protection. Electronic Cell Protection offers linger tool life and run time.
• DURABLE: With a durable design and a front rubber wrap, the reciprocating saw provides protection for internal parts from dust, debris, and water. Its bumper design minimizes vibration.
• CONVENIENT: The PS60-102 reciprocating saw comes complete with an LED light to effectively illuminate dark work spaces as well as a battery fuel gauge to indicate capacity level.Speed:0-3,600

User questions & answers

Question:	is there a safety switch that has to to be pressed in each time of use or can it be used by pressing it in once and using it. and then locking it out
Answer:	Hi! The BC1880 18V Lithium-Ion Battery Charger is not compatible with batteries that have a different voltage. To charge a 36V Battery, you would need a 36V Lithium-Ion Battery Charger, like the BC3680. You may check on the item through this link https://www.amazon.com/Bosch-BC3680-Lithium-Ion-Battery-Charger/dp/B01CG974GU. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	I will be using this to cut nails that are holding pallets together is it powerful enough
Answer:	Thank you for your question. Chargers need a minimum of 200 watts to be used with an inverter. If you are using a generator be sure to use full sine wave not modified wave. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST.
Question:	Hi, what are the charger model# and battery model# included in this ps60-102 package
Answer:	It should be compatable with the gba18v63. On Amazon it says backward and forward compatable with all Bosch 18V tools, so it should fit this charger. This is a 120-V charger, not for 220V. The Bosch 2607225423 Li-Ion 220V Charger may be what you're looking for, but definitely contact Bosch before buying to make sure it will fit your battery. You would have to contact Bosch to see if they even make such an 18-V charger.
Question:	Where is it made
Answer:	Thank you for your question. The BC1880 has a 120 volt rating. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).

Product features

Efficient and Easy Operation

The Bosch 12-Volt Max Pocket Reciprocating Saw Kit PS60-102 works for the most demanding applications in wood, masonry and metal. The super-efficient and powerful 1.5Ah high capacity battery and a powerful 3,000 (SPM) motor provides ample power to increased productivity and enhanced power.

Heavy Duty

With various functions of this tool include a fuel gauge, making battery management easier for continued work and a comfortable soft-grip top and body allow multiple grip positions to prevent hand fatigue. Change the blades with ease and experience added durability and sturdiness with the Bosch 12-Volt Max Pocket Reciprocating Saw Kit PS60-102.

Added Stability

The Bosch 12-Volt Max Pocket Reciprocating Saw Kit PS60-102 also includes a pivoting foot that gives you added stability when you are working on wood and other materials. Ideal for cutting, trimming, carving and other applications, this hand tool by Bosch is ideal completing small projects around the house

Product description

3-1/4 In. , 24TPI, TC Shank Jigsaw Blade, PK3, Primary Saw Application Specialty, Package Quantity 3 BOSCH is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use. Whether for miter, straight or curved cuts, BOSCH sells the right saw blade designed for high performance in all major brand jig saws.

From the Manufacturer

Bosch is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use. Whether for miter, straight or curved cuts, Bosch sells the right saw blade designed for high performance in all major brand jig saws.

• Power Tools and Accessories
• Country of manufacture: Switzerland
• Manufacturer: Bosch

User questions & answers

Question:	Will this blade work with a Ryobi orbital jig saw? The blades that came with it have a "T" shank but also have a hole in the end
Answer:	It can project a line approx. 3/4" from and parallel to the wall. However, the 45 & 90 deg. lines will be aimed at the wall. Therefore, it will only be useful to project a straight line, not using the squaring function.
Question:	would this blade be good for cutting a small piece off of a low profile galvanized steel unistrut channel
Answer:	Thank you for your question. The GTL3 Tile Laser range starts at 6" up to 65ft. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST.
Question:	How are these blades for cutting MDF
Answer:	Just looked at box and lazer . Sorry they both say china. Still great tool !!
Question:	Bosch offers this blade is 24 and 14 TPI. Which would be better for cutting/coping 3/16 thk AL angle
Answer:	Thank you for your question. The Bosch GTL3 comes with a leveling plate to allow positioning of the measuring tool flat on an uneven or unstable floor. The plate can also be used as a wall bracket for the measuring tool and use a level to fix the leveling plate flat on the surface. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).

Product features

Metal

When the job requires cutting metal, Bosch jig saw blades deliver dynamic speed and longer life versus other jig saw blades. Patented Bosch tooth geometries incorporate both aggressive and reinforced teeth to increase performance. Applications for Bosch metal-cutting jig saw blades include thin- and thick-gauge metals, plus thick-wall pipes and profiles.

Side Set & Ground

Side set and ground teeth offer clean, fast cuts in wood and plastics. In the design of jig saw blade teeth, side set means teeth are designed to be offset and are used for cuts that are fast. These blades tend to have fewer teeth per inch (TPI) and are used in thicker material applications.

Wavy Set & Milled

Wavy teeth sets are used for cuts in metal, non-ferrous metal, aluminum and plastics. For wavy teeth sets in jig saw blades, teeth are aligned in a wave design and can be used for straight, fine cuts. These blades tend to have a higher teeth per inch (TPI) count and are used in thinner material applications.

Side Set & Milled

Side set and milled teeth offer fast, rough cuts in wood and plastics. Teeth that are side set are offset in design and are used for faster, rough cuts. These blades tend to have fewer teeth per inch (TPI) and are used in thicker material applications where a rough cut is acceptable.

Ground & Taper Ground

Ground and tapered ground jig saw blades offer a precise, fine and clean cut in wood. Taper set teeth have a straight alignment and are used for slower, very fine cutting. These blades tend to have higher teeth per inch (TPI) and are used in wood applications requiring a slow, smooth cut or when cutting thinner materials.

Product description

The Bosch GAX1218V-30 dual-bay charger can charge Bosch 18V, Bosch 12V max and Mobile phone batteries through the 2. 1 amp USB port. This one charger provides the ultimate convenience to users who need to charge both Bosch 12V max batteries and Bosch 18V batteries. It also provides a 2. 1 amp Max USB port to power up a Cell phone (and other devices). It quickly charges batteries and it provides LED indicators so users can monitor the charging while they work. It charges a spent Bosch 18V 4. 0 Ah battery in 85 minutes and a spent Bosch 12V max 2. 0 Ah battery in 45 minutes.

• Dual-charging convenience – allows users to charge a Bosch 18V or a Bosch 12V max battery with one charger
• Usb port – Provides a way to charge a mobile phone (and other devices) with a 2. 1 amp max port
• Efficient 18V charging – charges a spent Bosch 18V 4. 0 Ah battery in 85 minutes
• Fast 12V max charging – charges a spent Bosch 12V max 2. 0 Ah battery in 45 minutes
• Battery-charge indicator – provides charging status

User questions & answers

Question:	Hello. This one works with 220v input
Answer:	Thank you for your question. The BS5618-15S are designed for 56 1/8" bandsaws only, it will not work with a 56 7/8" bandsaw. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)

Product description

Bosch HEPA cabin air filters provide ultimate protection in trapping allergens, dust, and other particulates that can enter your vehicle in order to provide the cleanest ambient air possible for you and your family. Designed and tested to meet high efficiency particulate air (HEPA) standards based on test standard ASTM D2986, Bosch cabin air filters provide filtration efficiency of 99.97% at 0.3 microns. Per test Astmd2986 on part numbers 6003C, 6026C, 6029C, 6055C, 6056.

• High Efficiency Particulate Cabin Air Filters are designed to trap microscopic pollutants including pollen, mold and common allergens
• Without adding formulated chemical odor neutralizer, Bosch HEPA cabin filters provide true clean air to enhance respiratory health
• Melt-blown electrostatic layer and very dense media provides greater trapping capabilities; Additional static cotton layer added to HEPA Media to provide high capacity in holding small particulates
• Structural ribs added to provide increase stability of filter; product comes with multi colors (blue and white)
• Cabin air filters should be replaced at least once every 12 months (or every 12K miles)
• Fits 2011-2019 Ford Explorer, 2010-2019 Ford Flex, 2013-2019 Ford Police Interceptor Sedan, 2013-2019 Ford Police Interceptor Utility, 2014-2018 Ford Special Service Police Sedan, 2010-2019 Ford Taurus, 2010-2016 Lincoln MKS, 2010-2019 Lincoln MKT

User questions & answers

Question:	Will this fit 2004 audi a6 4.2l quattro
Answer:	Thank you for your question. The PS60 is manufactured in China. Robert Bosch Tool Corporation utilizes a global manufacturing strategy, which incorporates a global network of suppliers with our worldwide manufacturing locations in countries such as Germany, Mexico, Switzerland, China and the United States. Our manufacturing facilities around the globe are all owned and operated by the Bosch Group and maintain the highest quality standards. You can be assured that whatever country your Bosch product was made in, it will be made with the quality you would expect from Bosch.
Question:	I need a cabin filter for the car that takes out smoke - forest fire- does this do that
Answer:	Thank you for your question. The BS5618-15S have a 0.012 blade thickness. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Exact dimensions of bosch 6055c and other bosch hepa filters
Answer:	It fits my Delta 3 wheel. If you use 56 1/8" blades!!
Question:	What size or model fits the 2008 prius. it should be per toyota 9.2 8.3 1.7 but bosch website not helpful and not here either. is it a secret
Answer:	For a saw blade 72", you must mean a band saw blade. I would Google for a WEN 72 1/8" X 1/8" and see your choices are.

Product features

Keep your family breathing clean air

Bosch recommends replacing your Cabin Air filter every 12,000 miles or per your vehicle owners manual. Cabin air filters are designed to clean the air that enters a vehicle through the heating, ventilation, and air conditioning (HVAC) system. Cabin air filters absorb fumes, pollen, dust and pollutants from entering a vehicle and protects passengers from being exposed to these elements, especially those affected by allergies and other respiratory problems. Bosch HEPA Premium Cabin Air Filters are designed and tested to meet High Efficiency Particulate Air (HEPA) standards based on test standard ASTM D2986, and provide filtration efficiency of 99.97% at 0.3 microns*. This efficiency provides ultimate protection in trapping allergens, dust and other particulates that can enter your vehicle and provides the cleanest air possible for you and your family.

For your health

Protection against fine dusts, allergens, harmful gases and bacteria.

For your comfort

Noticeably more pleasant and cleaner air inside the vehicle.

For your vehicle

Fewer deposits on fans and air conditioning ensure optimum performance and reduce the risk of repairs.

For your safety

Fewer allergic reactions reduce the risk in dangerous situations; prevents fogged‑up windows thus ensuring optimum sight.

Benefits of Bosch HEPA Premium Cabin Air Filters

Provides the cleanest air possible with efficiency of 99.97% at 0.3 microns*.

Has a Melt-blown Electrostatic layer that provides greater trapping capabilities than non‑HEPA media

Ultimate protection in trapping allergens, dust, and other particulates. Competitor cabin air filters are often made with only two layers.

Structural ribs provide additional stability and durability for a stronger cabin air filter

Most cabin air filters take less than 15-20 minutes to change. Instructions for changing a cabin air filter are unique to each car and instructions are included in the box.

HEPA Media

- Magnified at 300x.

- Three Layers.

What is a micron?

The average size of the openings between pieces of the filter media are represented in microns. A micron compares the size of common allergens. As a general rule, the smaller micron rating is for a filter, the better the filter is. For example, a 20-micron filter has larger openings than a 5-micron filter. Consequently, the 20-micron filter element will let larger particles pass through the filter than the 5-micron media would. Bosch HEPA Premium Cabin Air Filters provide filtration efficiency of 99.97% at 0.3 microns*.

Non-HEPA Media

- Magnified at 300x.

- Two Layers.

Product description

Basic for metal blades are the economical choice for cutting sheet metal and thin metals (ferrous and non-ferrous). Ideal for straight-line and fast cuts. U-shank design. BOSCH is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use. Whether for miter, straight or curved cuts, BOSCH sells the right saw blade designed for high performance in all major brand jig saws.

From the Manufacturer

Bosch is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use. Whether for miter, straight or curved cuts, Bosch sells the right saw blade designed for high performance in all major brand jig saws.

• For sheet metal 10-16 gauge, thin metals 1/16 In. to 1/8 In. thick (ferrous and non-ferrous)
• 17-24 TPI progressive tooth design for smooth cuts in various thicknesses
• High-speed steel construction for maximum life in straight cuts
• 3-1/8 In. overall length, 2-1/2 In. working length
• Proper lubricant is recommended when cutting metal

User questions & answers

Question:	Will the bosch bosch u118a fite a craftsman jigsaw
Answer:	Thank you for your interest. If you are cutting a few pallets the Bosch PS60 is powerful enough as long as you use the proper blade designed for cutting wood with nails. If you plan to cut several pallets we would recommend our 18v reciprocating saw model CRS180 as it will cut through the material faster and easier. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	Will these fit a black n decker js660 type2 5a
Answer:	Thank you for your question. The PS60-102 will include a BC330 charger. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)

Product features

Metal

When the job requires cutting metal, Bosch jig saw blades deliver dynamic speed and longer life versus other jig saw blades. Patented Bosch tooth geometries incorporate both aggressive and reinforced teeth to increase performance. Applications for Bosch metal-cutting jig saw blades include thin- and thick-gauge metals, plus thick-wall pipes and profiles.

Side Set & Ground

Side set and ground teeth offer clean, fast cuts in wood and plastics. In the design of jig saw blade teeth, side set means teeth are designed to be offset and are used for cuts that are fast. These blades tend to have fewer teeth per inch (TPI) and are used in thicker material applications.

Wavy Set & Milled

Wavy teeth sets are used for cuts in metal, non-ferrous metal, aluminum and plastics. For wavy teeth sets in jig saw blades, teeth are aligned in a wave design and can be used for straight, fine cuts. These blades tend to have a higher teeth per inch (TPI) count and are used in thinner material applications.

Side Set & Milled

Side set and milled teeth offer fast, rough cuts in wood and plastics. Teeth that are side set are offset in design and are used for faster, rough cuts. These blades tend to have fewer teeth per inch (TPI) and are used in thicker material applications where a rough cut is acceptable.

Ground & Taper Ground

Ground and tapered ground jig saw blades offer a precise, fine and clean cut in wood. Taper set teeth have a straight alignment and are used for slower, very fine cutting. These blades tend to have higher teeth per inch (TPI) and are used in wood applications requiring a slow, smooth cut or when cutting thinner materials.