12 best diamond blade for wet tiles

Product description

The QEP Black Widow Diamond Blade is a premier blade with micro-segments for speedy, chip- and wobble-free cutting of porcelain, marble, granite and ceramic tile. The diamond-shaped, micro-segmented laser cutouts around the perimeter keep the blade cool for superior performance and a longer life. Independent lab test results have proven Black Widow Blades continuously outperform the competition in durability.

From the Manufacturer

The Black Widow Diamond blades are designed for quick cutting of hard tile including porcelain, ceramic, granite and marble, without wobble or chipping. Independent lab test results have proven that Black Widow specialty blades continuously out perform the competition in durability for a longer life and speed of cut, reducing project time.

• Porcelain certified diamond blade cuts porcelain, marble, granite and ceramic tile
• High quality steel with 7 mm, diamond-coated high-rim for less chipping and a cleaner cut
• 5/8 in. Arbor fits most brands of wet tile saws
• 6, 115 Maximum RPM
• Micro segments help cool the blade and prevent wobbling and chipping
• Ideal for high speed cutting of Hard masonry tile

User questions & answers

Question:	Will this fit all saws that require 10" x 5/8"? These are the specs for my ryobi miter saw, but is there some other spec
Answer:	I am unsure of the arbor size on your saw, but the blade should fit any circular or miter saw that has a 5/8 inch arbor. I have a rigid tile saw and no problems. They lasted longer than any other blade a tried and were well balanced
Question:	Does this blade need to be installed a certain direction
Answer:	It has been quite awhile since I installed this blade, but I do not recall any directional markings, as with any continuos rim diamond blades. I installed it label out and it has worked flawlessly since!
Question:	Max RPM
Answer:	I bought to use on a three horse power wet saw, 3000 to 4000 rpm. It cuts very smoothly.
Question:	will this blade work well for cutting agate and other hard stones
Answer:	It cuts granite, so it should work for agate. I'm not sure what you mean by "other hard stones." Diamond will cut every stone on earth (including other diamonds). However, this isn't a lapidary blade. For one, it's thicker than most lapidary blades and you will waste a lot of material in the cutting. Second, there aren't as many diamonds on this as on a lapidary blade so the blade won't last nearly as long. What do you want to cut?

Product description

Enjoy accurate cuts with the QEP 7 in. Glass tile diamond blade for wet tile saws. This blade features a 7 mm continuous rim with a diamond-coated cutting edge for clean cuts in glass tile with minimal chipping. This blade is specifically engineered for cutting glass tile, but it may also be used for cutting tile flooring materials such as ceramic, porcelain, mosaic and most natural Stone products.

From the Manufacturer

Premium blade for the wet cutting of glass tile

• Designed for use with a wet tile saw
• For wet cutting at speeds up to 8,730 RPM
• 5/8 in. arbor fits most brands of wet tile saws
• Steel blade
• 7mm diamond-coated cutting edge
• 7mm continuous hi-rim
• Cuts glass tile

User questions & answers

Question:	Can this be used on glass tile in a dry application or do you need to use as a wet blade
Answer:	I did, it worked fine, just kept a trickel of water on it, not hammer drill mode. Had to break the center out with hammer and chisel to get all the way through it.
Question:	Can this be used on a circular saw
Answer:	Thank you for your question. The HDG11 hole saws are designed for granite, ceramic and porcelain tiles, we do not recommend using for concrete. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	can this use to cut carbon fiber tube
Answer:	This is a very specific sized diamond tip. They come in various sizes. Is this what you are asking? This is not a set. This is for only one
Question:	Will this blade fit on a Skil saw #3450 (wet saw
Answer:	3/4 inch on flats measurement. you do need the mandrel.

Product description

Cut through porcelain and old tile quickly and effectively with the durable DW4762 10-Inch Wet Cutting Continuous Rim Saw Blade. Featuring an optimized cutting matrix and consistent diamond concentration and distribution that results in reliable performance, this blade is a job-specific tool designed for wet applications. Crafted to ensure a the longest possible life and safe, predictable performance, this blade also features a high concentration of diamonds for improved speed, higher quality diamonds for better blade durability, and a high-quality steel core that minimizes distortion for more precision and minimizes vibration to save wear and tear on your body. The tensioned blade core also resists wobbling to give you complete control over your tools.

From the Manufacturer

DeWalt DW4762 10-Inch Wet Cutting Continuous Rim Saw Blade with 5/8-Inch Arbor for Porcelain or Tile

• Extended performance diamond matrix provides long life and enhanced material cutting
• Continuous rim design provides chip free cutting in all types of tile
• XP2 and XP4 blades designed specifically for high power tile saws, allowing quick, free, low heat, and straight cutting
• XP2 and XP3 blades with laser cut expansion slots eliminate blade warping due to heat build-up
• Premium XP2 and XP4 cutting matrix means XP2 gives 2 x's the life of standard blades, XP4 gives 4x's the life of standard blades

User questions & answers

Question:	What kind of bond does this blade have
Answer:	I'm not sure because I didn't do that, but I drilled through solid stone with no problems at all, so I'm guessing you can.
Question:	The question about using this blade to cut glass was not answered. What blade will I need to cut glass
Answer:	Mine burn out after two holes in ceramic tile lol
Question:	Can this blade be used in the DeWalt saw with the UK voltage? I think I read somewhere the arbor sizes are different. Many thanks
Answer:	I would save these bits for drilling porcelain tiles; and you'll need to keep spraying water on the bit to cool it off. If you just want to drill holes in concrete, get standard masonry bits and use a hammer drill. Spend an extra $50 and get a good one. The best bit in the world won't drill concrete with a standard drill. You need a hammer drill.
Question:	My saw is 4000 RPM, what is this blade rated to
Answer:	A regular drill works great- no hammer drill needed.

Product description

Piranha 7-inch (7") continuous rim wet/dry diamond blades are made with GE Superabrasive diamonds and are used for cutting a wide range of materials including ceramic tile, porcelain tile, stone or anything similar. Specs are 7" diameter X .060 thick with a diamond-7/8"-5/8" universal arbor for all tile saws, circular saws and hand-held grinders. The thin (.060) cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut! The diamond rim is also 10mm tall which maximizes cutting life and achieves a low cost per cut. Recommended operating speed is 5,100 RPM. Expected blade life is approximately 600 linear feet.

• This general purpose diamond blade is used for cutting a wide range of materials including ceramic tile, porcelain tile, granite, marble, slate, terrazzo or anything similar.
• Specs are 7" diameter X .060 thick with a diamond-7/8"-5/8" universal arbor for all tile saws, circular saws and hand-held grinders.
• The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting.
• The thin (.060) cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut! It is also 10mm tall which maximizes cutting life and offers a low cost per cut. Recommended operating speed is 5,100 RPM.
• This top-quality product is made in USA and backed with a 100% lifetime warranty plus free return shipping! If it ever breaks, warps, cracks or shows any indication of a material defect (being used for its intended use), or if the bond between the diamond rim and the steel core becomes separated at any time, it will be replaced free of charge!

User questions & answers

Question:	Can this blade be used to cut concrete
Answer:	I tried it dry just to try it, and I think, aside from the amazing amount of dust, it would over heat very quickly if you did anything other than the world's slowest movement. I would not use it dry. But wet, cuts glass smooth as silk and fairly quickly too.
Question:	Is this blade good for cutting quartz and other rocks
Answer:	i haven't done that but i can't see why not, just make sure you have the rotation correct.....
Question:	Can I use this on a 10” miter saw to cut a couple of marble chair rails
Answer:	Hi Our 6-70006GLQ is designed to be use with glass only and hasn't been tested for your application Thank you
Question:	What is the minimum rpm for this blade? we can not use slower than 3,600 rpm
Answer:	Good day, This blade will work on saws that fit the 5/8" arbor that the blade has. Thank you for choosing QEP. Customer Service

Product description

Quality industrial grade diamonds and easy-to-use color coding system. Applications include cutting in ceramic, slate. For use in tile saw.

• 5/8-Inch arbor
• Designed for clean cuts in most tile materials
• Tensioned steel core for stability
• Consistent diamond content and even distribution

User questions & answers

Question:	Has anyone used this blade to sharpen carbide tipped combination blades
Answer:	What do you mean by bond
Question:	can this blade cut metal
Answer:	It will work fine for cutting wine bottle and the like (thicker glass). If you feed into the blade slowly you will get a smooth chip free cut. The thinner the glass being cut, the more prone to chipping and cracking it will be.
Question:	can I use this to cut agates and other stones
Answer:	The blade does not impact the voltage. It is the arbor (the hole in the center) that matters.
Question:	How does this do with porcelain tile? I see that they mention "slate and ceramic on the blade itself. All of my work it with porcelain
Answer:	The label on the blade says it's good to 6000 RPM. But you wouldn't be able to read the label until you buy the blade and you wouldn't buy it until you knew what it's RPM limit is. Glad to help!

Product features

Bosch Diamond Blades

All Bosch diamond blades start with a formulation that emphasizes consistent diamond content and even distribution. A hardened and tensioned steel core provides rigidity and stability during cutting; and blades are designed to extend the life and enhance user comfort. Bosch engineers develop custom combinations of metals and industrial-grade diamonds to produce blades for specific concrete- and masonry-cutting applications.

Segmented Rim

For the fastest cuts in concrete, block, brick and stone.

Turbo Rim

For fast, smooth cuts in concrete, masonry and stone.

Continuous Rim

The cleanest cuts, best for tile and stone.

Go the Distance

Bosch diamond blades are designed for tough professional applications.

Superior Performance

Delivers clean, accurate cuts in a variety of different abrasive materials.

Tuckpointing

Standard and sandwich tuckpointing blades provide quick and consistent grout and mortar removal.

Concrete Surfacing

Segmented and turbo diamond cup wheels are optimized for material removal and fine finishing applications.

Product description

The QEP 6-7003Q 7 in. Continuous rim diamond blade provides accurate cutting with minimal chipping. The blade is specifically engineered for cutting ceramic tile, as well as granite, marble, Pavers and many other materials. Designed for wet cutting and long lasting performance.

From the Manufacturer

The QEP 6-7003CR 7-Inch Continuous Rim Diamond Blade provides accurate cutting with minimal chipping. The blade is specifically engineered for cutting ceramic tile, as well as granite, marble, pavers and many other materials. Designed for wet cutting and long lasting performance.

• Engineered to cut: tile, marble, Porcelain
• Continuous rim-Inchwet-Inch minimizes chipping
• Arbor size of 0.625-Inch
• 8730 Maximum RPM

User questions & answers

Question:	where is made
Answer:	Not sure, You're best bet would be to purchase a concrete cutting saw blade . There are several available on the market. Be sure to purchase a wet cutting saw blade and wear protective gear-goggles, gloves, mask. Concrete dust is toxic and there may be pieces of concrete flying thru the air. Be safe!
Question:	how thick is the blade
Answer:	I'd try it. It works great on porcelain tile and that's very hard.
Question:	Will this work in a regular portable circular saw or must one use a specialized wet saw? Am cutting some travatine tiles
Answer:	I used it on a wet tile saw to cut marble backsplash tiles, 1/2 inch thick. Worked great, lasted a long time. Not sure about the dry cutting, might be prone to chipping. Would spray it with water/spray bottle while you are trying to cut it maybe
Question:	Will this cut glass tile
Answer:	The saw we used turns at least that fast if not faster. We used a hand held angle grinder to cut out tile. Hope this helps.

• Dry or wet cutting,with 1"-20mm-5/8" arbor
• Designed for cutting porcelain tile ceramic granite marble brick ect
• Our delivery time is about 7-15 days from China
• Super Thin X Turbo Segments provide chip free cutting
• Reinforced ring core on both side of blade, make cutting more stable and get better finishing

User questions & answers

Question:	Does the 10inch blade include a 5/8th arbor washer? The images only show a 1 and a 7/8th arbor option
Answer:	This blade was meant for stone/tile type materials, but if you have a light gauge metal (wire mesh/alum siding) it will probably do in a bind. But I would not recommend it for heavy gauge metals (steel door/iron bars etc; you will need a metal cutting blade instead).
Question:	Can it be used to cut wine bottles
Answer:	You sure can, granite is no problem and that's about as hard as stone's get. Cuting thick stuff make sure you use it wet, dry cuts on thick stuff will wear it out a lot quicker but it'll last a long time cutting with water.
Question:	does this blade come in with a 1 inch arbor
Answer:	I have used it with both ceramic and porcelain tile and it worked well with both.

Product features

Suitable for Dry/Wet Cuts

• Blades are made of high hardness turbo diamond Segment and high-strength steel with multi-hole design,
• which could enhance heat dissipation, chip removal and reduce noise,
• You could use them in Dry/Wet Condition

Super Thin X Turbo Teeth Design

• Super Thin X Teeth Turbo design not only provides faster and smooth cuts, but also ensures chip fee cuts with less dust and longer working life,
• which can bring higher work efficiency and economic benefits

Reinforced Ring Core

• Both sides of Blades contain Reinforced Ring Core, which could make cutting more stable and get better finishing
• With the bore of 1"-20mm-5/8", suitable for most tile saws with 1"-20mm-5/8" arbor

Wide Application

• Designed for cutting Porcelain/Tile/Ceramics/Brick/Granite/Marble/Rock/Masonry/Quartz/Stones/Slate/Cement/All Similar Materials.

• Suitable for tile installer and general home made DIYers, Please wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).

Product description

The QEP 6-7001Q 7 in. Continuous rim diamond blade provides accurate cutting with minimal chipping. The blade is specifically engineered for cutting ceramic tile. Designed for wet cutting and long lasting performance.

• Exact specifications assuring the user a wobble-free blade that produces smooth and precise cuts
• General purpose blade for wet/dry cutting of ceramic
• Diamond blade for long-lasting performance with minimal chipping
• 8730 maximum RPM, arbor size of 0.625 in.

User questions & answers

Question:	will this blade cut glass? i need to cut a bunch of 1/2" thick glass
Answer:	Blade width: 0.06"
Question:	Will this fit in an MK 7 inch tile saw
Answer:	Good day, This blade 6-7003Q will cut travertine when used on a wet saw that accepts this blade size and arbor. Thank you, Customer Service
Question:	Does this a 7/8 arbor
Answer:	Hello, I am sorry. not suitible for glass cutting.
Question:	Can i use this blade for skil 3550-02 7-inch wet tile saw
Answer:	Thank you for your question. We do not recommend using the DB1043S to sharpen blades, this blade is designed for ceramic and slate material. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)

Product description

MK Diamond 156651 MK-215GL 7 by .050 by 5/8 inch is a glass cutting blade. Premium grade metal bond blade for glass. Metal bond glass blades provide smooth chip free cutting and are ideal for production type applications.

156651 Blade Size: 7" Features: -Wet Cutting Continuous Rim Diamond Blade MK-215GL. -Supreme grade, metal bond blades for chip - free, production glass cutting. Usage: -Tile/Glass. This metal bonded diamond blade from MK Diamond is excellent for use on a wet cutting tile saw for cutting glass tile, glass block and fused glass.

From the Manufacturer

MK Diamond MK-215GL 7 inch diameter by .060 width by 5/8 inch arbor supreme grade metal bond diamond blade for cutting glass. Metal bond formulation and diamond chip mix provide for chip free production glass cutting. Also provides for the elimination of breakout when cutting glass tubing.

• 7 by .050 by 5/8 inch
• Glass cutting blade
• Premium grade metal bond blade for glass
• Metal bond glass blades provide smooth chip free cutting
• Ideal for production type applications
• Metal bond formulation and diamond chip mix provide for chip free cutting of glass tiles, glass block and fused glass
• Metal bond formulation and diamond chip mix also provides for the minimization or elimination of breakout
• Supreme grade metal bond diamond blade for cutting glass

User questions & answers

Question:	What is the max RPM gir the 7 inch blade
Answer:	Yes, our 10" tile blade include 5/8" arbor washer. We know most of our friends need 5/8" arbor and we have added a new bushing to this blade which could change the arbor from 20mm to 15.875mm(5/8"). Now our 10" diamond blade could be fit on the machine which arbosr are 25.4mm(1"), 20mm and 15.875mm(5/8").
Question:	I need it with 7/8 Arbor, is this
Answer:	No, we don't recommend you use our this balde for cutting glass, we specially design this blade for cutting tile porcelain marble brick granite and all similar stone materials
Question:	Do you need to dress this blade immediately before using
Answer:	Yes, our 10 inch diamond blade has 25.4mm(1 Inch) arbor. If you machine need the blade which arbor is 1-Inch, you could remove the rings or bushings of this blade.
Question:	How long will this blade last
Answer:	Thailand.....vender out of Boca Raton,Fl.

Product description

Piranha 4.5-inch (4 1/2") dry/wet diamond blades are made with GE Superabrasive diamonds and can be used on a wide range of materials including ceramic tile, porcelain tile, stone or anything similar. Specs are 4 1/2" diameter X .060 thick with a 7/8" arbor hole and 20mm-5/8" bushing for all hand-held grinders and trim saws. The thin (.060) cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut! The diamond rim is also 8.5mm tall which maximizes cutting life and offers a low cost per cut. Recommended operating speed is 8,000 RPM. Expected blade life is 500 linear feet.

• Premium diamond blade for use on a wide range of materials including ceramic tile, porcelain tile, granite, marble, slate, terrazzo or anything similar.
• Specs are 4 1/2" diameter X .060 thick with a 7/8" arbor hole and 20mm-5/8" bushing for all hand-held grinders and trim saws. The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting.
• The thin (.060) cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut!
• The diamond rim is also 8.5mm tall which maximizes cutting life and offers a low cost per cut. Recommended operating speed is 8,000 RPM.
• This top-quality product is backed with a 100% lifetime warranty plus free return shipping! If it ever breaks, warps, cracks or shows any indication of a material defect (being used for its intended use), or if the bond between the diamond rim and the steel core becomes separated at any time, it will be replaced free of charge!

User questions & answers

Question:	Can this cut through tile motar with chicken wire
Answer:	No this will only cut porcelin and ceramic tile.
Question:	Can i use this blade on a black and decker 4.5 inch angle grinder
Answer:	if the arbor is the same size as the ID of the blade bore , otherwize You need ither a spacer or a bigger hole in the blade. Nick
Question:	Is it good for cutting sheet metal roofing
Answer:	no it is 5/8" arbor
Question:	Can you inform the diameter of the internal hole
Answer:	it should work the blade is a standard 7" inch blade with an adapter.

Product description

Our most popular diamond blade for wet cutting of glass tile, glass mosaic and large sheets of glass up to 3 cm. Made with a very fine and uniform diamond grit, Piranha Glass blades perform excellent cuts and nearly eliminate chipping on both the surface of the glass tile and its painted side. Make chip-free cuts that result in a first-class job. Not recommended for ceramic tile, porcelain tile or stone material. We also encourage using a dressing stone as needed. Because this is a top-quality US made product it is backed with a 100% lifetime warranty that also includes free return shipping. If it ever breaks, warps, cracks or shows any sign of a material defect (being used for its intended purpose), or if the bond between the diamond segment and the steel core becomes separated at any time, it will be replaced free of charge!

• Our most popular diamond blade for wet cutting of glass tile, glass mosaic and large sheets of glass up to 3 cm.
• Made with a very fine and uniform diamond grit, Piranha Glass blades perform excellent cuts and nearly eliminate chipping on both the surface of the glass tile and its painted side.
• Size: 7" X .060 X 5/8" Arbor. Make chip-free cuts that result in a first-class job. Designed for use with a wet tile saw and similar.
• Not recommended for ceramic tile, porcelain tile or stone material. We also encourage using a dressing stone as needed.
• Because this is a top-quality US made product it is backed with a 100% lifetime warranty that also includes free return shipping. If it ever breaks, warps, cracks or shows any sign of a material defect (being used for its intended purpose), or if the bond between the diamond segment and the steel core becomes separated at any time, it will be replaced free of charge!

Product description

WHAT KIND OF DIAMOND BLADE DO I NEED?

Selecting the size of the diamond blade is all dependent on what tool you are using, as well as the material you are trying to cut. Every application will vary on the task at hand, as well as the bore size and segment height of the blade.

DECIDE WHICH IS MOST IMPORTANT►

The initial price of the tool or the cost per cut. For smaller jobs or occasional use, a low priced tool may be preferable. For larger jobs or regular use, a higher priced tool will actually be less expensive to use because it will deliver the lowest cost per cut.

KNOW THE TYPE AND POWER OF YOUR EQUIPMENT►

Will you be using a 5-hp power cutter or a 70-hp flat saw? The answer will dramatically impact blade choice. The diamond blade size, whether you can use a wet or dry blade and the rpms needed to spin the blade all depend on the equipment.

CORRECTLY IDENTIFY WHAT YOU ARE CUTTING►

Correctly identifying the material to be cut is the most important factor in choosing a diamond blade. It directly affects the cutting speed and the life of the blade. When you know the material our diamond tool specification sheet help you find the most suitable tool. As a general rule,determine the material which will be cut most often, or the material for which top blade performance is most important.

CHOOSE WET OR DRY CUTTING►

Choosing wet or dry may be a matter of user preference or job requirement. Wet cutting is usually preferred because you can cut deeper when using water as a coolant. For tile and masonry saws, either wet or dry cutting blades can be used. For power cutters, dry blades are more popular, but they are often used wet to control dust. Wet blades MUST be used with water. Dry blades may be used either dry or wet, depending on the job and the equipment.

• Arbor: 7/8"-5/8" bushing, Rim height .395"(10mm). Size is 7"x.070"x.395"/10mm.
• Hot-pressed sintered blade: Ideal for high speed cutting of hard masonry tile
• Please use wet cutting to prevent the cutting edge from being damaged and not smooth.
• Designed for: Ceramic tiles and porcelain.
• Applicable models: Angle grinder, Circular saw, Hand-held power saw, Masonry saw, Wet cutting.

User questions & answers

Question:	Does this blade have a 1" arbor size
Answer:	I am using it on a MK660 with 3500 RPM, but I also have a friend using it on a MK 377 exp with 5500 RPM without any problem. Most important is enough with cooling water and that you sharpen the disc now and then. Another interesting disc is also the new BOSCH diamond disc for glass....
Question:	Will it cut glass tiles
Answer:	5/8" ARBOR IS STANDARD. wHAT SAW IS IT?
Question:	Why did I receive an 7/8" arbor when the description said
Answer:	No...using a wet saw - no need to dress blade.
Question:	what do you mean by segment dimension? Also, I am using a 1.5 hp saw. Will this blade work with this horse power
Answer:	It is depends of the material. I am using it for cutting fused glass 6-8 mm with layers of dichroic glass between, a very tuff material for the blade. We are using the saw twice a week for 3-4 hours nonstop cutting every time and change the blade every 2 month to avoid splitter from the glass. So it means at least 60-80 hours hard work for the blade. We have plenty of other blades, but are always coming back to this. Important is house a sharpening stone for diamond blades regular keep the water in the saw clean and let the saw make the job without pushing.