13 best metal cutting blade for chopsaw

Product description

Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts with no sparks and cool, burr-free edges. These blades feature Cerment II blend Teeth to deliver up to 3X the life of standard metal cutting carbide blades. With specialized unique features such as Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, and Triple Chip Grind Tooth Design, Diablo's Steel Demon blade series provide unparalleled performance and superior quality cuts.

• Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide.
• Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications.
• Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications
• Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability
• Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws)

User questions & answers

Question:	Has anyone cut a section of r.r. track with this blade
Answer:	I have not and would not recommend it. You wouldn't get an inch into the r.r. track before you burned up the carbide teeth. A bandsaw would be more suited for that task, or even and abrasive cutoff saw.
Question:	Will this blade replace an abrasive chop saw blade
Answer:	This blade cannot be used on a chop saw. The RPM on a chop saw is too high for this blade. The maximum RPM this blade can be used with is 1800. A chop saw would use 3800 RPM.
Question:	What revolutions neede to cut metals
Answer:	You could go as slow as around200 rpm and the "slow speed" metal cutting saws, made for carbide toothed blades work fine but don't install this on a saw meant for an abrasive blade. The RPMs are too high and will destroy the blade in short time, unless you only cut wood or aluminum but not steel. Also be aware that small stuff, like1/8" round stock bundled, will catch the teeth and not work well. But for angle iron, tubing, etc, it works great.
Question:	Will this work for exhaust tubing
Answer:	This is a metal cutting blade for tube steel, angle iron, flat bar, structural steel, unistrut, EMT, steel studs and other ferrous metals.

Product description

Designed for cutting mild steel, Evolution metal cutting blades use dry cut technology, cutting with very little heat and few burrs.

• Evolution saw blades are designed to deliver maximum performance by using the highest grade Carbide, Hardened blade Bodies, and ultra high-grade brazing techniques
• All offer premium quality
• Designed to increase performance..-Note: Designed for use with Evolution saws or other low RPM saws.
• 1600 RPM
• 66 Carbide Teeth, .094-Inch Kerf
• 1-Inch Arbor Size

User questions & answers

Question:	For cutting mild steel, what is the advantage of using this blade over the evolution multi-material blade (rage355blade
Answer:	Look at the menu or on the page of Amazon's these file before you buying it.
Question:	I've read reviews on repl. blades for my Dewalt DW872 multi cutter & I'm leaning toward purchasing this blade. Anyone have experience w the combo
Answer:	Metal, for metal. Such knives, drill bit, axes,etc.
Question:	Can these blades be used in my dewalt chop saw or evolution saw only
Answer:	Yes, only for small file on mosaic softly.
Question:	will it cut 1/4 thk mild steel angle
Answer:	Yes. You will destroy the very weak, fragile and smooth of aluminum stucturally physically.

Product description

The construction features double reinforced wheel with two full sheets of fiberglass for safety and performance. Material composition of the wheel consists of a premium grain for added wheel life and speed. The chop saw wheel includes enhanced formulations which provide longer life and optimal performance. DEWALTÂ inspects the high quality resin bonds for 100-percent quality before sale for product consistency and quality.

From the Manufacturer

DeWalt offers a full range of Type 1 cutting wheels for low power chop saws, high power stationary machines, high speed portable saws, grinders, and circular saws. These wheels are designed to offer a long service life and fast cutting. Performance is optimized through double reinforcement with two sheets of fiberglass, premium grains, enhanced formulations, and high quality resin bonds that are 100-percent inspected. Satisfaction guaranteed.

• Equipped with heavy-duty Carbide teeth for long life and ejection springs for easy plug removal
• A raised shoulder helps to prevent breakthroughs
• An optimized tooth design delivers fast drilling speeds for helps to increased efficiency

User questions & answers

Question:	Will this cut stainless steel tube
Answer:	Yes, they are, BUT Crescent is one of the better importers. I would compare these favorably to any of the domestic brands, especially for 15% of the price.
Question:	Can this be used to cut 12 ga unistrut
Answer:	Made in China
Question:	Hi friends can I use this wheel for miter saw ??? Thanks for the help and time
Answer:	Exactly on this because I do not have my set in front of me but I believe it's 3/8 inch and an eighth really nice versatile set gives you everything you need pretty much
Question:	Can I use this on a table saw
Answer:	Dear friend, this mechanics tool set is made from excellent manufacturer in China.

Product description

DEWALT DW8001B4 Heavy Duty 4 Pack 14-Inch by 7/64-Inch by 1-Inch General Purpose Chop Saw Wheel

• High performance aluminum oxide grain for long life and fast cutting
• High grain concentration for agressive cutting action and smoother running wheels
• Proprietary material mix ensures durable long life wheels
• 2 full sheets of fiberglass for durability and safety

User questions & answers

Question:	can this fit in a compound miter saw
Answer:	It's definitely not cheaper to buy them separately.
Question:	Will it work on demo saw
Answer:	The majority of their tools are made in Taiwan but the plastic holders are made in the USA (which is why some people dishonestly advertise as Made in USA). According to their website, about 25% of their product is made in USA, but they do not clarify if they are including stuff like the holders. Check their website, every tool will breakdown where it is made.
Question:	Will this work on aluminum
Answer:	They're regular size that's all I can say 1/4-1-11/4 6-32m 6-32-mm
Question:	What is the max rpm needed to run this blade on metal
Answer:	This set does not come with any storage provisions.
Question:	Will this work on my dewalt (14") chop saw? or is rpm too high
Answer:	This is Nate from Tekton. These combination wrenches are made from chrome vanadium steel.
Question:	I am looking to cut solid bars around 40 to 45 hrc. will this blade work
Answer:	This is Nate from Tekton. We make these wrenches in Taiwan.
Question:	I cut a lot of 2 7/8 production tubing with .25 wall thickness and 1 inch sucker rod. Would you recommend this blade for that heavy use
Answer:	i dont own 18792 but from my understanding, the difference is the pouch or the plastic rack.The roll up pouch is a very useful feature if you need to travel with your tools. When you are back in your workshop, you can just hang it up with 2 nails.

Product features

Specification - Diameter: 14"(355mm) - Teeth: 66-Tooth - RPM: up to 1500 - Arbor: 1 Inch

Product description

Benchmark Abrasives saw blades are made for accuracy and precision. They produce very few sparks and little heat, allowing the cut material to be handled quickly. Our steel/ferrous metal cutting blades suitable for cutting pipe, rebar, channel, conduit, steel studs, angle iron and more.

• Benchmark Abrasives blades have been designed to maximize performance on thin/mild steel and other ferrous metals.
• Material applications include square tube, angle iron, thin steel plate, pipe, tube, rebar, flat stock and other ferrous metals.
• Do not exceed an RPM of 5,200.
• Arbor - 1" with 5/8" bushing
• 52 Carbide Teeth

User questions & answers

Question:	I’m wanting to cut 1/4 x 1/4” slots in a piece of 1/2 x 1/2” x 18 ga square tubing. Can I do th at with this blade on a job site table saw
Answer:	It is about an eight of an inch, but it will cut a swath about 3/16" wide
Question:	What is the max thickness this blade can cut
Answer:	it has a knockout bushing in case you need 7/8. I don't know about fts-50 & have never had need for 7/8 size.
Question:	I am needing 14" saw blade to rolls of plastic (vinyl). I am told the higher number the better smoother cut and finish will result
Answer:	Product details says it will. I used it for ceramic tile and it worked great in a wet tile saw. I have no experience with cutting glass. Hope that helps.
Question:	can i cut aluminum
Answer:	NO

Product features

Maximized Performance

Blades have been designed to maximize performance on aluminum and other non-ferrous metals. They produce very few sparks and little heat, allowing the cut material to be handled quickly.

Works on Many Metals

The specially formulated carbide lasts longer and leaves clean, burr-free cuts in all types of non-ferrous metals such as aluminum, copper, brass, bronze, and even some plastics.

Reduced Noise & Vibration

Our non-ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The 10-inch and larger also feature copper plugged expansion slots for reduced noise and vibration while it features heat vents for cooler operation.

Product description

IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. IVY Classic Swift Cut Metal Cut-Off Blades are constructed out of resin bonded aluminum-oxide grain which enables faster cutting of steel, angle iron, sheet metal and other ferrous metal products. The blades feature double reinforced fiberglass mesh for durability and safety and metal reinforced arbors for extra strength. IVY Classic products: 40088, 40106 and 40108 are designed for use with chop saws.

• Designed to cut steel, angle iron, sheet metal and other ferrous metal products, Do not use on High Speed Saws, Swift Cut (Registered Trademark)
• Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only
• Blade double reinforced with fiberglass mesh for durability and safety
• Arbor reinforced with metal for extra strength
• Diameter: 10-inch, Width: 3/32-inch, Arbor: 5/8-inch, Max RPM: 6, 100

User questions & answers

Question:	Will this work on a 10 inch miter saw to cut 40 weight 2 3/8 galvanized pipe? Approximately 10 cuts total
Answer:	Yes, I have cut 1" bars of Manganal steel (similar to AR500) and it works fine. Use an aggressive, even feed and make sure the work is well clamped.
Question:	Does this fit on a mitre saw? Or chop saw
Answer:	1. We had tested 14x66T by cutting 2 inch ( diameter 50mm ) steel bar, test result is ok. So we think it's ok for cutting 2 7/8 tubing with 0.25 wall thickness and 1 inch sucker rod. 2. This blade is suitable for mild steel and iron, not for stainless steel and high strength quenching steel. 3. We are willing to share any feedback from your side. If testing result is not good enough, we will provide other items depending on your feedback.
Question:	Would this blade be suitable for cutting ceramic tile
Answer:	i dont own 18792 but from my understanding, the difference is the pouch or the plastic rack.The roll up pouch is a very useful feature if you need to travel with your tools. When you are back in your workshop, you can just hang it up with 2 nails.
Question:	can i use this on a 10" table saw turning 5000 rpm
Answer:	About 12" x 5"

Product description

Cuts mild steel pipe, angle iron, tubing, conduit and channels. Use with LC1230, [461.6215].

From the Manufacturer

Fits Makita model LC1230 metal cutting saw.

• Package Dimensions: 1.778 cms (L) x 32.004 cms (W) x 32.004 cms (H)
• Package Quantity: 1
• Product Type: Saw Blade
• Country Of Origin: China

User questions & answers

Question:	can I use this blade to cut aluminum with my Makita dry cut saw
Answer:	The DW8001B4 is a General Purpose Chop Saw wheel with a 1" arbor.
Question:	could i tickle through light gauge pipe, 1 5/8 fence stock really. if i go real real slow just sort of kissing my way across, maybe lubing along
Answer:	Yes, like butter!
Question:	Can this blade be used in a traditional chop saw? I have a Bosch
Answer:	MAX RPM is 1500 when cutting metal.
Question:	Can i use this with a 12" miter saw? i will be cutting ferrous 1/6" and 1/8" generic steel
Answer:	This 14 inch 66T recommond Max rpm 1500, it's suitable for Dewalt Multi-Cutter Saw , DW872. Not Dewalt 14 inch chop saw.

Product description

Package List:

10 x 14-Inch Cutting Wheel

• 14-Inch diameter by 1/8-Inch thick,1-Inch arbor Cut-off Wheel,10PCS
• Use on Stationary Chop Saws,Cuts Ferrous metals,Steel,angle iron,brass,bronze,carbon steel,and other metals
• High performance aluminum oxide grain for long life and fast cutting

Product description

Remember when you had a smooth and powerful cut? The WEN 14-Inch Metal Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through mild steel, making easy work out of pipes, square tubes, angle iron, and other ferrous metals. The 1-inch arbor allows for compatibility with 14-inch miter saws, chop saws, and other metal saws. Our unique dry-cut-capable design limits the heat and burrs created by the competition. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf of a mere 1/10 of an inch wide (2.4 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

• Featuring a 14-inch diameter (355 mm), a 1-inch arbor (25.4 mm), and a rating of up to 1450 RPM
• Perfect for dry-cutting through steel and metal, including pipes, tubes, angle iron, and other ferrous metals
• Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
• Designed with 66 carbide-tipped teeth for general-purpose mild steel cutting
• Compatible with 14-inch dry-cut metal saws, chop saws and circular saws

Product description

High performance aluminum oxide grain for long life and fast cutting. High grain concentration for agressive cutting action and smoother running wheels. Proprietary material mix ensures durable long life wheels. 2 full sheets of fiberglass for durability and safety

From the Manufacturer

DEWALT DW8001 14-Inch x 3/32-Inch General Purpose Chop Saw Wheel

• High performance aluminum oxide grain for long life and fast cutting
• High grain concentration for agressive cutting action and smoother running wheels
• Proprietary material mix ensures durable long life wheels

User questions & answers

Question:	Does this cut 5/8 Rebar
Answer:	yes
Question:	Is this blade good for making a clean cut through laminate wood flooring
Answer:	I’m not sure. You should be able to use a tile cutting saw. I think ceramics need to have water running on your piece while you cut it.
Question:	Can this blade cut 6" non-pressure pvc pipes
Answer:	I do not know, if the label on the blade says it is good for that many rpm, then it will likely be fine, but if the label says something less this blade will or could blow apart sending shrapnel every where
Question:	How thick is this wheel
Answer:	Read this before you decide to buy this item: https://www.smarthomekeeping.com/miter-saw-cut-metal/

Product description

The Makita 14" X 1" X 3/32" Abrasive cut-off wheel, 5/PK. (B-57598-5) is double reinforced for longer life, less burr and less vibration. Designed for cutting heavier gauge metal such as pipe or angle iron, The abrasive cut-off wheel is ideal for use with 14” Cut-Off saws. A special bond improves cutting speed and wheel life.

• Double reinforced for longer life, less burr and less vibration
• Up to 2 times the life of a 7/64" Thick abrasive wheel
• Up to 20% faster than a 7/64" Thick abrasive wheel
• Designed for cutting heavier gauge metal such as pipe or angle iron
• Special bond improves cutting speed and wheel life

Product description

Specification

- Diameter: 10"(254mm)

- Teeth: 80-Tooth TCG

- RPM: up to 5500

- Arbor: 5/8 Inch

From the Manufacturer

TOMAX is a fully integrated enterprise, incorporating technology, research and development, manufacturing and marketing functions. We have over 10 years production experience in circular saw blades, abrasives and diamond tools.

• Ideal for cutting Plastic, Aluminum and Non-Ferrous Metals
• Construction grade carbide teeth provide maximum resistance for longer life
• Electrophoretic Coating reduces the rusting and corrosion
• TCG Grind for a durable and smooth cut on non-ferrous metals, aluminum, and plastic items
• Quality Guarantee, Limited Lifetime Warranty by TOMAX

User questions & answers

Question:	Will this blade work on a Delta mitre saw
Answer:	If the staples will not go all the way down in the chamber than obviously you have the wrong type and/or size staples. When I bought my air locker staple gun I bought my staples at the same time. The staples I bought for my air locker U630E are Air locker make type 7106 22 gauge upholstery staples. their dimensions are metric not standard, 9.10 mm crown by 6 mm length. I have never had a problem with them fitting in or working with my Air Locker U630E upholstery stapler.I recommend you try again and this time be sure you're getting the right staples with the right dimensions. Just search the site for "Air Locker 22 gauge upholstery staples MKS-7106. give them a try and let me know if they solve your problem you may reach me by E-Mail at [email protected].
Question:	Will this cut wood? If so how well
Answer:	nO THIS STAPLER IS A PEICE OF CRAP, I CANNOT RECOMEND BUYING IT.
Question:	Does it cut mild steel
Answer:	Hi Deb, I bough this gun last year and never used it. It was not fit for my work, all I know it would fit staples sizes 3/8" and 1/2" only. I could not see how it could be used up to 5" staples neither any sizes of brad nails.I still have the gun, never used. Am willing to give it away if I do not have to pay for shipping.Thanks,Chin.
Question:	Can I cut acrylic with this blade
Answer:	No. Only batteries

Product features

Aluminum and Non-Ferrous Metal Saw Blade

Diameter: 10"(254mm)

Teeth: 80-Tooth TCG

RPM: up to 5500

Arbor: 5/8 Inch

Maximum Performance

Requires less power

Faster feed rate

Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up

Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish

Table Saw

TOMAX saw blades are carefully crafted using the best materials, the most innovative designs, and the industry's most sophisticated manufacturing processes. Every blade is specifically designed for superior performance and maximum life.

Portable Table Saw

Carbide size is extremely important when it comes to sharpness as well as the rate at which an edge wears. The larger the carbide grain, the faster an edge will wear. Select the TOMAX blade for your application from a wide variety of designs and sizes.

Radial Arm Saw

Suitable for different tools. Laser-cut anti-vibration Technology reduces noise and extends cutting life, Laser Cut steel blade body for smoother cuts and flatness, and Non-stick Perma-Shield Coating that reduces gumming, rusting, and corrosion for longer life with less wear.

Product description

Outfit your DW872 Multi-Cutter Saw for tough metal work applications with this heavy-gauge DeWalt DW7747 14-Inch Ferrous Saw Blade featuring a 1-inch arbor.This 70-tooth blade is capable of making an average of 1,200 cuts in most materials rotating at 1800 rpm, and it is designed to let you resharpen the teeth for improved cutting and a longer life. It is crafted with 12-percent titanium carbide and features expansion slots that dissipate heat. Plus it offers a tri-foil braze that increases the strength of each tooth's tip for exceptional durability, while a modified triple chip tooth grind helps ensure clean, burr-free cuts for beautiful finished projects.

From the Manufacturer

DeWalt DW7747 14-Inch 70 Tooth Heavy Gauge Ferrous Metal Cutting Saw Blade with 1-Inch Arbor.Manufacturer location:USA.

• 12% titanium carbide provides long life in metal cutting
• Modified ATB tooth geometry provides clean, burr-free cuts
• Tri-foil braze absorbs stress, making the tip stronger
• Expansion slots dissipate heat which extends blade life
• Backed by a 1-year warranty

User questions & answers

Question:	este disco se puede usar en una maquina D
Answer:	No, esto no sería compatible.
Question:	What is the maximum thickness of iron rod this will cut? i need to cut 1" square rod
Answer:	It will cut 1 inch square solid Rod no problem. The secret to success with this blade is to feed it very very gently especially at the start of the cut. Then gentle pressure and it will cut the metal perfectly.
Question:	Can i use this on a dewalt chop saw that comes with a fiber disk ???? size and rpms match
Answer:	No, this would not be compatible; Use only TYPE 1 cutting wheels with Chop Saw: https://www.dewalt.com/products/accessories/abrasives/bonded-abrasives?Facet2=Diameter%253b%253b14-s-in%253b%253b14%7C&pageNum=1
Question:	This blade says to use it no faster than 1800 RPM, my Porter Cable saw is 3800 RPM. So does everybody ignore that detail
Answer:	NO! Do not ignore that detail! If blade lifespan is important to you then use the 1300 RPM saw that it is designed for. They will last many months and I make thousands of cuts into multiple pieces at a time. If you use the ordinary chop saws intended for high RPM abrasive discs you can count the number of days it will last on your fingers...kind of a shame when they are $125 each and a disc is $10.

Product features

About DEWALT

DEWALT is a leading manufacturer of industrial power tools and accessories, including corded and cordless drills, saws, hammers, grinders, routers, planers, plate joiners, sanders, lasers, generators, compressors, nailers, saw blades, metal and masonry drill bits, abrasives, screw driving accessories and more. DEWALT tools can be found nationally and internationally wherever tools are sold. With more than 1,000 factory-owned and authorized locations, DEWALT has one of the most extensive service and repair networks in North America.

Made in the USA

In a commitment to build America, DEWALT, a leading manufacturer of high-quality professional power tools, is proud to expand its product offerings made in the USA using global materials to include more than 600 different cordless power tools, hand tools and accessories. DEWALT began production of its American-built cordless power tools in its 75,000-square-foot Charlotte Manufacturing Operations facility in early October of 2013, using global materials. Those same tools built prior to the opening of the factory were manufactured internationally and imported.

DEWALT cannot guarantee the tool you receive to be made in the USA, some retailers may have items that were built prior to October 2013. Only tools manufactured after October 2013 are made in the USA with global materials.