12 best masonry circular saw blades

Product description

DEWALT DW4712 High performance 7-inch dry/wet cutting continuous rim diamond saw blade for block and brick

From the Manufacturer

DW4712 High Performance 7-Inch Dry/Wet Cutting Continuous Rim Diamond Saw Blade for Block and Brick

• The product is 7", high performance masonry blade
• Easy to use
• The product is manufactured in China
• High performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust

User questions & answers

Question:	Will it fit a dewalt angle grinder tool, 7-inch, 13-amp (dw
Answer:	I'm not sure, It depends on the arbor size on your grinder. The package I have says 5/8 7/8. It has an insert you can remove for the 7/8 arbor. I run mine on a 7.25 skill saw. Works well, it might be a handful on an angle grinder. Good luck
Question:	Does it work on wood
Answer:	DW4712 is ideal for cutting block, masonry siding products, and other masonry materials.
Question:	would this fit on a circular saw. I usually use a 7 1/4 blade
Answer:	It is an abrasive wheel meant to be used with a grinder. It is not intended, recommended, or tested by the manufacturer for use with a circular saw.
Question:	Whats the difference between the dw4712 and the dw 4712b? same pics
Answer:	The b stands for bulk. So no different just the way we buy them

Product description

The DeWALT DW4712B 7", high performance masonry blade is a high quality blade intended for cutting brick & masonry material. It features a 5/8" diamond knock out arbor for a faster cut rate at constant depth which minimizes dust with thinner kerf. It lasts up to 30 times longer than abrasive blades and is for use o n 7" & 7-1/4" circular saws.

• The product is 7", high performance masonry blade, 5/8" Diamond knock out arbor
• Easy to use
• The product is manufactured in China
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust

User questions & answers

Question:	Does this work for cutting slate pieces
Answer:	It will a variety of masonry pieces including slate.
Question:	can I use this 7 inch blade in a 71/4 inch circular saw
Answer:	It will work as normal however the depth will be 1\4 inch less.
Question:	Do you need to cut concrete wet or can it be cut dried? My only concern is electrical shock with a circular saw
Answer:	I cut 32' of concrete with a circular saw to a depth of 2-1/2" with this blade and did it without water. The blade shows little wear.
Question:	will this blade work on an asphalt driveway
Answer:	I cut out a section of asphalt with this. Cut through easily. Also cut 2 inch pavers and old kiln fired brick. Pavers cut easily, brick was tough but got through that too. Helps to squirt the blade with water while cutting to reduce heat and dust.

Product description

Diamond masonry blade - high performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal. Thinner kerf to increase speed of cut while minimizing dust. Applications dry cutting Block, masonry Siding products and other masonry materials. Faster cut rate at a constant depth. Ideally used on thinner and softer masonry materials.

DeWalt's 4-1/2-Inch High Performance Masonry Diamond Blade provides long life and enhanced material removal. It has a thinner kerf to increase speed of cut while minimizing dust, and achieves 30 times longer life than bonded abrasives. This blade is best for cutting block, masonry siding products, and other masonry materials. It offers a faster cut rate at a constant depth, which is ideal for thinner and softer masonry materials.

From the Manufacturer

DeWalt DW4725 High Performance 4-1/2-Inch Dry Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor for Masonry

• The product is 4-1/2" HiPerf MAS Blade
• Easy to use
• The product is manufactured in China
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust

User questions & answers

Question:	Will this fit the cordless dewalt 4 1/2 dcg412? thanks
Answer:	It will fit any 4 1/2". Cord or no cord is irrelevant.
Question:	Will this grid carbide bits
Answer:	This a Diamond Saw Blade, its used to cut tile, brick, concrete, Masonry type work. Not intended for cutting metal. I cut tile and concrete with mine.
Question:	Will this fit a DeWalt model D28402W
Answer:	Yes, you can use this with the DW402 but you need to get the DW4706 Backing Flange. Amazon sells it for $2.99 as an add-on item. You need this flange for any type 1 cutting wheel used on a type 72 grinder (cupped surface disks). BTW, the arbor is 7/8" for disks that don't screw on, and 5/8" threads for those that do screw on. Hence you need cutting disks, like this one, with a 7/8" arbor. This applies for all grinders, not just Dewalt.
Question:	Will this blade cut cast iron pipe
Answer:	it will cut steel but it will wear it out very fast . i am a mason and cut rebar with these blades all the time . not sure about cast iron but softer steel they will cut although they are not intended to be used for that

Product features

Diamond Saw Blade

High Performance diamond matrix provides longer life and enhanced material removal with a thinner kerf to increase speed of cut while minimizing dust. Used in applications such as cutting block, masonry siding products, and other masonry materials.

• High Performance diamond matrix provides more life of conventional abrasives and enhanced material removal.
• Thinner kerf to increase speed of cut while minimizing dust.

Product description

WHAT KIND OF DIAMOND BLADE DO I NEED?

Selecting the size of the diamond blade is all dependent on what tool you are using, as well as the material you are trying to cut. Every application will vary on the task at hand, as well as the bore size and segment height of the blade.

DECIDE WHICH IS MOST IMPORTANT►

The initial price of the tool or the cost per cut. For smaller jobs or occasional use, a low priced tool may be preferable. For larger jobs or regular use, a higher priced tool will actually be less expensive to use because it will deliver the lowest cost per cut.

KNOW THE TYPE AND POWER OF YOUR EQUIPMENT►

Will you be using a 5-hp power cutter or a 70-hp flat saw? The answer will dramatically impact blade choice. The diamond blade size, whether you can use a wet or dry blade and the rpms needed to spin the blade all depend on the equipment.

CORRECTLY IDENTIFY WHAT YOU ARE CUTTING►

Correctly identifying the material to be cut is the most important factor in choosing a diamond blade. It directly affects the cutting speed and the life of the blade. When you know the material our diamond tool specification sheet help you find the most suitable tool. As a general rule,determine the material which will be cut most often, or the material for which top blade performance is most important.

CHOOSE WET OR DRY CUTTING►

Choosing wet or dry may be a matter of user preference or job requirement. Wet cutting is usually preferred because you can cut deeper when using water as a coolant. For tile and masonry saws, either wet or dry cutting blades can be used. For power cutters, dry blades are more popular, but they are often used wet to control dust. Wet blades MUST be used with water. Dry blades may be used either dry or wet, depending on the job and the equipment.

• Arbor: 7/8"-5/8" bushing, Segment height .395"(10mm). Size is 7"x.090"x.395"/10mm.
• Hot-pressed sintered blade: The grain of diamond will not become larger, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high.
• Main features: The product is 7" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal.
• Designed for: Brick, block, concrete, masonry, stone etc.
• Applicable models: Angle grinder, Circular saw, Hand-held power saw, Masonry saw, etc.

User questions & answers

Question:	How wide is the cut
Answer:	Yes, 5/8" blade adapter is included
Question:	can this blade be used to cut thin metal
Answer:	It depends on the arbor size of your grinder, this is a 5/8" arbor with a diamond knockout so if those fit, then yes
Question:	Can i use it for skil 3550-02 7-inch wet tile saw
Answer:	Hi, No sure , these blades are for Masonry.
Question:	Will this blade fit a EK8100 makita concrete saw
Answer:	No. Although the blade will theoretically cut through a glass sheet, the heat generated by a high speed grinder will make the glass crack. If you have a variable speed grinder and use it on the lowest speed and perform the cut intermittently, you might be able to make a cut without cracking.

Product description

DEWALT High Performance Masonry Cutting Abrasive Saw Blades have premium silicon carbide grain for long life and fast cutting. The proprietary material mix ensures durable long life wheels. They have 2 full sheets of fiberglass for durability and user safety. They have 5/8-Inch arbor with a diamond knockout arbor for use with worm drive saws. Each wheel has a cutting edge 1/8-Inch think and can be operated at up to 8700rpm.

From the Manufacturer

DEWALT High Performance Masonry Cutting Abrasive Saw Blades have premium silicon carbide grain for long life and fast cutting. The proprietary material mix ensures durable long life wheels. They have 2 full sheets of fiberglass for durability and user safety. They have 5/8-Inch arbor with a diamond knockout arbor for use with worm drive saws. Each wheel has a cutting edge 1/8-Inch think and can be operated at up to 8700rpm.

• Premium silicon carbide grain for long life and fast cutting
• Proprietary material mix ensures durable long life wheels
• 2 full sheets of fiberglass for durability and safety
• Diamond knockout arbor for use with worm drive saws
• Heavy duty cutting of concrete and other masonry materials

User questions & answers

Question:	Will these work for my hand grinder with a 5/8 -11 TPI shank
Answer:	Good Day We have only have a 5 inch blade on amazon which would be your closest option https://www.amazon.com/Toolgal-Segmented-Concrete-Circular-Grinders/dp/B0819YLTTS?ref_=ast_sto_dp Hope this helps you
Question:	Does this cut wet or dry
Answer:	All the 9" battery powered cutters, such as Makita, Milwaukee, DeWalt, use 7/8" arbor 9" blades.
Question:	will this blade work with my dewalt 20v circular saw
Answer:	Yes it will as it has a cut depth of 7/8" and your cutting 3/4". Good luck and I recommend a spray bottle to keep the blade cool unless your using a bench table saw with auto watering.
Question:	Can you cut Corrugated fiber glass roofing panels with these blades
Answer:	Not sure, but if it's designed for a 7" saw blade then it should work. Contact the manufacturer to have the exact answer you're requesting!

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 7/8-Inch - 5/8-Inch. Size is 6"x.095"x.395"/10mm.
• This diamond blade belongs to Whirlwind USA Lighting Series - Lighting General (Segmented Lighting)

User questions & answers

Question:	I have a 5 1/2" circular saw. Should I get a 5" or 6" blade
Answer:	When you say "base", do you mean the tablet stand in the picture? No, this product is the cable lock with keys and anchor plates. Not the tablet stand.
Question:	what's the cutting depth of the 14" blade
Answer:	Ok
Question:	Will this fit on worm drive
Answer:	This will work with any device with a USB port and compatible OS. As long as you're running one of the major operating systems (windows/mac os/linux), this will work for that.
Question:	Planning on cutting petrified wood with this blade. any experience? also is it compatible with the bosch go14 polisher? i know its rpm goes up to
Answer:	If you want to use this USB ethernet adapter you would need to connect it to the cable that goes in to your modem. This means that you can go as far away from your modem as the length of the ethernet cable that you have. In terms of using in your car it probably would not work, especially if you were actually going somewhere in your car!

Product features

Whirlwind USA LSS General Diamond Saw Blade

• Whirlwind USA LSS gold, economical segmented blades that can be used for general purposes. The LSS series is designed to provide fast and smooth cutting of bricks, concrete and marble in a variety of materials. It can match a variety of models such as paver, angle grinder and marble machine. Can be used wet or dry.
• Whirlwind is currently the largest diamond saw blade production base in China, aiming to provide American customers with the highest quality saw blades

Strong and Lasting

The cutter head adopts higher grade diamond, which is sharp and can be used for a long time

Faster and Simpler

Turbine segmented tooth design ensures easy and smooth cutting

Stable Cutting

Hot pressing process combined with high-quality raw materials, stable and safe cutting

Product description

Optimize your concrete, block, and brick cutting work with this Makita 2 Pack Premium 4-1/2” Diamond Turbo Blades. Working at a 90-degree angle, perpendicular to the work surface, applying the proper amount of pressure to allow the cutting blade to do the work. For best results, consider not pushing too hard on the blade, which can cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage and premature wear. Applying light to moderate pressure and consistent movement will provide the most efficient cut and minimize heat build-up causing warpage of the blade. Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause blade warpage and reduced wheel life. For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts.

• ✅ 2 Makita 4-1/2” Premium Diamond Turbo Blades For FAST Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor
• ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry
• ✅ QUICKLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds with Makita’s proprietary bond that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class
• ✅ AVOID BLADEWEAR & Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear
• ✅ DESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication, general maintenance, brick layers & general industrial applications, these blades are Quality tested and laser welded for unsurpassed blade integrity, planned to outperform other blades in its class | Each blade is engineered to work at 13,800 RPM and a maximum cutting depth of 1" to 1-1/4 inch

User questions & answers

Question:	Does it come with adapter for 5/8 arbor
Answer:	the wide of the segment is 2.3 mm
Question:	do you need to use water
Answer:	Hello, buyer. This saw blade can't be used to cut metal. This saw blade is specially used to cut concrete, Brick, block, masonry and stone.
Question:	Can this cut fiber cement siding
Answer:	Yes you can
Question:	Will this cut quartz countertops
Answer:	if EK8100 could accept the 16 inch blade.it could be use on it.

Product description

Cutting Pro 10 inch Dry or Wet Cutting General Purpose Power Saw Segmented Diamond Blades for Concrete Stone Brick Masonry (10")

• Segment height 10mm. Arbor 7/8"-5/8". Size is 10"x.070"x.395"/10mm.
• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Sintered diffusion bonded.
• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• This diamond blade belongs to Cutting Pro Diamond General Purpose Segment Series

Product description

Optimize your concrete, block, and brick cutting work with this Makita 2 Pack Premium 4-1/2” Diamond Segmented Blades. Working at a 90-degree angle, perpendicular to the work surface, applying the proper amount of pressure to allow the cutting blade to do the work. For best results, consider not pushing too hard on the blade, which can cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage and premature wear. Applying light to moderate pressure and consistent movement will provide the most efficient cut and minimize heat build-up causing warpage of the blade. Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause blade warpage and reduced wheel life. For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts.

• ✅ 2 Makita 4-1/2” Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor
• ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry
• ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class
• ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flow cooling technology, allowing for safe, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear
• ✅ DESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication, general maintenance, brick layers & general industrial applications, these blades are Quality tested and laser welded for unsurpassed blade integrity, planned to outperform other blades in its class | Each blade is engineered to work at 13,800 RPM and a maximum cutting depth of 1" to 1-1/4 inch

User questions & answers

Question:	Can this blade be used on the 6 1/2 inch makita 18v lxt model bss
Answer:	The diameter is 4cm(about 1.5inch).
Question:	Will this cut granite
Answer:	Yes
Question:	Can this be used to cut flagstone
Answer:	It can be used on any tablets and cell phones and is not specific to apple products.
Question:	Can this blade be used on the cxt 12volt circular saw makita makes
Answer:	The footprint of the anchor plate is 1.5" x 0.6". And the keys are unique to the lock purchased in each package. A key from different package cannot unlock the lock from another package.

Product description

2 BRAND NEW DIAMOND BLADES 1pc 7" Wet/Dry Turbo Diamond Blade 1pc 7-1/4" Dry Segmented Diamond Blade Fits all 7" And 7-1/4" Circular Saws And 7" Angle Grinders Each Blade Has A 5/8" Arbor Hole With A Diamond Knockout Max RPM 8600 Great For All Your Concrete Or Tile Cutting Needs

User questions & answers

Question:	What is the max cutting depth if I use the blade on circular saw
Answer:	This blade is for cutting concrete, wet or dry.
Question:	Will these blades cut Asphalt
Answer:	I doubt a 12 inch blade will work on a 4.5 inch saw
Question:	Would this blade fit dewalt dwe575sb 7 1/4" circular saw
Answer:	Really well.... used it on veneer river rock... smooth finish but don’t force the cut let it glide natural with minimal pressure.... this prevents chipping & cracks
Question:	Do you think it will cut concrete
Answer:	Yes it will.

• SPECIFICATIONS: TOOLGAL Diamond Saw Blade Made of Premium Metal Components and High Quality Diamond Grits - Diameter size 7 inches (180mm) / Thickness .102" x Height .395" – For Wet and Dry Cutting - 7/8” Arbor size. Suitable for Angle Grinders, Circular Saws, Masonry Saws, Tilesaw and Gas Cutoff Cutters.
• FAST AND SMOOTH CUTTING – With Max 10,000 RPM, this diamond circular disc are produced specifically for use with general masonry materials such as concrete, roof tiles, stones, bricks and rocks.
• FOR THE PERFECT JOB EVERY TIME - High quality and high performance, this segmented circular saw blade perform better and longer than other diamond saw blades. Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or work at your home studio, this cutting tool is the perfect blade for you.
• MINIMUM CHIPPING AND CLEAR CUT due to the super thin segmented diamond tip. Engineered to use across various construction applications.
• TOOLGAL, A NAME YOU CAN TRUST For over 50 years TOOLGAL has been the global leader in high-performance diamond tools manufacturing. When you buy this blade or any other masonry tool from TOOLGAL, you are purchasing this directly from the factory.

User questions & answers

Question:	Need 5and a half "blade
Answer:	Chelan, WA
Question:	so it can only be used on saw with 7/8 bore? I don''t see USA has such saw
Answer:	Im not sure, I guess about 12 or so but they are so delicious.
Question:	Does anyone know how this would work on 3/4" marble
Answer:	Yes! They vary in size. But most of them are much smaller. They look more like those that are grown on trees at home. They’re delicious.
Question:	Will this fit Milwaukee cut off saw
Answer:	Washington

Product features

FEATURES

• Product: Segmented diamond blade
• Blade Diameter: 7" / 180mm
• Segment measurement: Thickness 0.102" x Height .395"
• Suitable for: wet and dry cutting
• Arbor Diameter: ⅞”
• MAX RPM: 10,000
• Package include: 1 x 180mm(7 inch ) diamond disc

FOR YOUR HARDEST CONSTRUCTION PROJECTS

This diamond blade is suitable for use with common Dewalt , Makita , Dremel , Avanti , Skil , Norton , Ishii , Ridgid , Husqvarna angle grinder / circular saw / tilesaw / cutoff machines with 7/8" arbor.

Engineered and designed for wet cutting only for strenuous, extended and continuous use by professionals in the masonry and construction profession.

Designed for general masonry materials, concrete, roof tiles and stone cutting.

INNOVATIVE DESIGN FOR SMOOTH CUTTING

The TOOLGAL 7 inch masonry general purpose diamond blade spesification allow it is fast, long-lasting and will provide you with the smoothest cut possible.

We operate with a STANDARD OF EXCELLENCE that goes above and beyond what has been traditionally acceptable.

Product description

Diameter: 4/1/2" (115mm)" Arbor: (9.5mm)

• Pack of 1 4-/1/2" 60 Grits Diamond Circular Saw Blade for Rockwell, Worx
• Use for Stone , masonry , tile
• Material HSS High Speed Steel
• Fits with Rockwell/ Worx 4/1/2"
• Arbor size: 3/8"

User questions & answers

Question:	Will this cut through glass mosaic tile already installed? I have one that slipped and sticks out a little farther then the others
Answer:	Hello,Don't worry one lock is compatible with only one key.Other people can't unlock your lock.
Question:	is the arbor
Answer:	yes it is, and stick very well.
Question:	Will this blade work for rough cutting lapidary use? Jade, Tiger's Eye, petrified wood. etc
Answer:	It might be a little bit big for a Roku or fire stick. I used it on the back of an iPod touch and there is about 1/2" on either side of the metal plate. The picture is pretty accurate for size. I think the iPod is about 2.5" across.