10 best masonry blade for chopsaw

Product description

ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage. The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone. Can be used wet or dry. For light or medium duty cutters.

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 10"x.070"x.395"/10mm.
• This diamond blade belongs to Alskar Diamond Segmented Lighting Series

User questions & answers

Question:	Can this cut SPC flooring
Answer:	It worked very poorly on bricks/concrete. It's not a very good blade in general, and I would not try it on nails. Get a blade specifically designed for metal.
Question:	Will this blade work on a worx wx427l 4.5" circualr saw
Answer:	It’s meant for cutting bricks, which it does okay with. Its a bit duller than a wood cutting blade.
Question:	I wonder how well this cuts hard thin veneer stone
Answer:	You can mount pretty much any direction. I just wouldn’t face them up, water would collect and ruin.
Question:	Some of the blades have a secondary hole, is this a guide pin? Will this work on arbor w/o this pin
Answer:	Doesn’t say it is. But hey, if you need a loud horn to save your butt. Go for for it. What’s the worse thing could happen. You get a fix it ticket? Just don’t use it for fun. Use to get out of harms way. Good Luck

Product features

Alskar Diamond Saw Blades

Alskar Diamond 4-1/2 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 4.5"x.070"x.395"/10mm.

Alskar Diamond 5 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 5"x.070"x.395"/10mm.

Alskar Diamond 6 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 6"x.070"x.395"/10mm.

Alskar Diamond 7 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor DM 7/8"-5/8". Size is 7"x.070"x.395"/10mm.

Alskar Diamond 8 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 8"x.070"x.395"/10mm.

Alskar Diamond 9 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor DM 7/8"-5/8". Size is 9"x.070"x.395"/10mm.

Alskar Diamond 10 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 10"x.070"x.395"/10mm.

10 Pack) Alskar Diamond 10 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 10"x.070"x.395"/10mm.

Alskar Diamond 12 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 1". Size is 12"x.125"x.395"/10mm. Includes 20mm heavy duty bushing.

Alskar Diamond 14 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 1". Size is 14"x.125"x.395"/10mm. Includes 20mm heavy duty bushing.

10 Pack) Alskar Diamond 14 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 1". Size is 14"x.125"x.395"/10mm. Includes 20mm heavy duty bushing.

Alskar Diamond 16 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 12mm. Arbor 1". Size is 16"x.125"x.395"/12mm. Includes 20mm heavy duty bushing.

• LSS diamond blades increase the density of diamonds and use higher-grade diamonds, which have high strength and are not easily deformed
• LSS granite saw blade adopts hot pressing process, combined with high-quality raw materials, to ensure the low amplitude and low noise of the product during high-speed operation
• Segment height 10mm. . Arbor DM-5/8"-7/8". size is 10 inch 100"x.395"/10mm
• LSS diamond blades can be used for both dry and wet, improving the diamond cutting speed and there are more sizes for selection
• LSS concrete blade adopts the design of turbine teeth and widens the cutter head, so that the cutting speed is faster and the performance is stable.
• LSS angle grinder saw blades are ideal for continuous use by professionals in industrial applications such as construction, concrete manufacturing and decoration

User questions & answers

Question:	I have a 5 1/2" circular saw. Should I get a 5" or 6" blade
Answer:	I can only say i was cutting 1 1/2 " limestone with no problem.
Question:	what's the cutting depth of the 14" blade
Answer:	These blades are quite robust. I used them to cut cinderblock without difficulty. Asphalt is made up of a lot of oil, the heat from the blades may melt the asphalt and possibly 'gum up' the works. I cannot say from experience. Give it a try, you'll have your answer fairly quickly. Good luck.
Question:	Will this fit on worm drive
Answer:	Yes. It fits any 7.25" saw. I used it to cut 2" thick limestone in a single pass.
Question:	Planning on cutting petrified wood with this blade. any experience? also is it compatible with the bosch go14 polisher? i know its rpm goes up to
Answer:	I guess it would depend on how thick the concrete is. One blade cut through 1.5 inch granite for 6 ft with no problem. Never tried on concrete.

Product features

Whirlwind USA LSS General Diamond Saw Blade

• Whirlwind USA LSS gold, economical segmented blades that can be used for general purposes. The LSS series is designed to provide fast and smooth cutting of bricks, concrete and marble in a variety of materials. It can match a variety of models such as paver, angle grinder and marble machine. Can be used wet or dry.
• Whirlwind is currently the largest diamond saw blade production base in China, aiming to provide American customers with the highest quality saw blades

Strong and Lasting

The cutter head adopts higher grade diamond, which is sharp and can be used for a long time

Faster and Simpler

Turbine segmented tooth design ensures easy and smooth cutting

Stable Cutting

Hot pressing process combined with high-quality raw materials, stable and safe cutting

• Made with GE Superabrasive diamond and Excellent for cutting through pre-stressed concrete. Use for all ferrous and non-ferrous metals. It is guaranteed to deliver a better combination of cutting speed and tool life, with a lower cost per cut than any other blade on the market.
• It will last over 100X longer than abrasive wheels while generating fewer sparks and alot less dust. It also cuts with a constant cutting depth and saves huge amounts of down time due to fewer blade changes.
• Dimensions are 12" diameter X .135 thick with a 1" arbor hole for hand-held power cutters, cut-off machines and masonry saws. Also included is a 20mm bushing for Stihl power saws.
• The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting. The maximum safe operating speed is 6,300 RPM.
• Because this is a top-quality US made product it is backed with a 100% lifetime warranty that also includes free return shipping. If it ever breaks, warps, cracks or shows any sign of a material defect (being used for its intended purpose) it will be replaced free of charge!

User questions & answers

Question:	Is this blade designed to be used with a Husqvarna K760 demo saw that spins at 4000 rpm
Answer:	Look at another working remote or find the receiver that the remote is supposed to operate and copy that code into your remote.
Question:	will it cut rebar and up to what diameter
Answer:	NO, this remote will not replace the 61LM. What you need to order is a 390LMD21V or if you want something smaller choose the 390 LMD21K
Question:	Will it work with dewalt sliding compound miter saw, 12-inch (dws
Answer:	I just got this and it worked perfectly with our 9 digit gate opener. Didn't have to change anything at all.
Question:	Is this blade designed to be used with a Husqvarna K760 demo saw that spins at 4000 rpm
Answer:	It is referring to 12V when hardwire go to this link for operational manual -- http://www.keystoneheddolf.com/instruction.html --- Once there click on M330-1KA (1-08-2015) --- Thank you from gate openers and more
Question:	How many Pins
Answer:	It would depend on the brand of radio receiver your opener has installed. If it is a Multi-Code Brand name or compatible radio control system that is on the 300MHz frequency and has 10 on/off code switches then this keypad would work. If you are not sure let us know the make and model number from the back of a working remote.
Question:	Does this have 12 dip
Answer:	Remove the 4 small screws on the faceplate and remove unit from housing. the batteries are on the back side of the unit.
Question:	What type battery does this remote use
Answer:	The unit is perhaps not "fully" waterproof but is very weather resistant. We have had no issues with our fully exposed installation with normal (heavy rain) exposure.

Product features

Diamond Extreme Heavy Duty 12-Inch Metal Cutting Diamond Blade with Side Coating

Delta Diamond Product's Diamond Extreme Metal Cutoff blade is the new standard for metal cutting and grinding with many advantages over typical abrasive discs. Use for cutting through all ferrous and non-ferrous metals including sheet metal, pipe, metal plate, steel bar, angle iron, ductile iron and rebar. They last many times longer than abrasive wheels with constant cutting depth. The high quality superabrasive diamonds are vacuum brazed to a steel core creating the strongest possible bond.

Product description

The Forney 71889 10-Inch Type 1 Masonry Asphalt Cutting Wheel is silicon carbide and dual fiberglass reinforced. Used primarily on ceramic, masonry, plastic and other non-ferrous materials. Quality made to provide fast, safe, dependable service. Designed to be used on stationary saw machines only. 10-Inch (254 mm) by 1/8-Inch (3. 18 mm) with 5/8-Inch (15. 88 mm) arbor. C20R-BF with Max 6, 110 RPM. Typical Spec Example A24R-BF: A=Used for Steel, 24=Grit (Coarse), R=Medium to Hard Bond. The First series of letters indicates Grain Type; A=Aluminum Oxide (Used in Metal Applications) C=Silicon Carbide (Used for Masonry Applications) ZA= Alumina Zirconium used for (Stainless Steel and Ferrous Metal Applications) TA=Ceramic Treated Aluminum Oxide (Used for Metal Applications) The Second series of letters indicates Grain Size or Grit; 8-24=Coarse, 30-60=Medium, 70-180=Fine and 220-Up=Hard. The Third series of letters indicates Bond Hardness; A-N=Soft, O-S=Medium and T-Z=Hard. The Fourth series of letters indicates type of Bond; BF=Retinoid Fiberglass Reinforced (Double Bonded), E=Shellac, R=Rubber and V=Vitrified. Wheel Types; Type 1=Flat Wheel for Cutting, Type 27=Depressed Center Wheel, Type 28=Hat Shaped for Grinding and Type 29=Flap Disc for Grinding and Finishing. Note: Harder Wheel have a longer life where a softer wheel will cut faster. Fine Grain=Long Life=Slower Cutting and Grinding. Coarse Grain=Short Life=Fast Cutting or Grinding. Claims for must be made within 90 days of the date of purchase. Proof of purchase required. This does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

• Silicon carbide and dual fiberglass reinforced for strength with masonry applications
• Used primarily on ceramic, masonry, plastic and other non-ferrous materials
• Quality made to provide fast, safe, dependable service
• Designed to be used on stationary saw machines only

Product features

Aluminum Oxide

Fused aluminum oxide (AO) is the most common abrasive grain in use today. AO is extremely tough and durable but has no clearly defined crystal structure; when the grain wears it produces rounded edges.

Suggested applications:

Aluminum and ferrous metals.

Zirconia Alumina

During manufacturing aluminum oxide and zirconia are quenched from molten form which gives the grain a crystalline structure. This gives the grain a longer cutting life and is especially suited to coarser stock removal applications.

Suggested applications:

Heavy-duty grinding on all ferrous and non- ferrous metals.

Silicon Carbide

Silicon carbide is the hardest of all common abrasive materials. It is very sharp, but friable, leaving new sharp edges for cutting. It is initially fast-cutting but has a short life span. It is ideal for use on non-ferrous metals like aluminum, brass, bronze, magnesium and titanium.

Suggested applications:

Non-ferrous metals, non-metallics.

Product description

VORTEX DIAMOND INC. has a very extensive standard selection of economically priced segmented blades for general contractor usage. The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone. Can be used wet or dry. For light or medium duty cutters.

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 1"-20mm. Size is 12"x.110"x.395"/10mm.
• This diamond blade belongs to Vortex Diamond General Purpose Segment Series

User questions & answers

Question:	Would this be good for cutting cement backer boards
Answer:	9 pins
Question:	How big is the center hole
Answer:	It has 9 switches.
Question:	Can this be used to make 1/2” grooves in hardwood like Ipe
Answer:	A23/23A. 12v Battery
Question:	Can I cut concrete paver stones with this blade
Answer:	mine does.. There are little switches in side.. 9 that you push up, down or in the middle.. you have to know what the code is that has been set for the gate.. I didn't do that part.. just was told the sequence to use.. and it worked..

Product description

IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. IVY Classic Swift Cut Masonry Cut-Off Blades are constructed out of resin bonded silicon-carbide grain which enables faster cutting of brick, concrete block, slate, tile and other masonry products. The blades feature double reinforced fiberglass mesh for durability and safety and metal reinforced arbors for extra strength. IVY Classic products: 41024, 41030 and 41032 are intended for use with chop saws.

• Designed to cut brick, concrete block, slate, tile and other masonry products, Do not use on High Speed Saws, Swift Cut (Registered Trademark)
• Resin bonded Silicon-Carbide grain for faster cutting, Type 1 blade - for cutting only
• Blade double reinforced with fiberglass mesh for durability and safety
• Arbor reinforced with metal for extra strength
• Diameter: 12-inch, Width: 1/8-inch, Arbor: 1-inch, Max RPM: 5,100

Product description

10" General Purpose Blade, 10mm rim, standard segmented, laser welded, polished with 5/8" bushing. 10-inch General Purpose diamond blade for cutting brick, block, concrete and pavers. Dry or wet use with high speed power saws, masonry saws, angle grinders and circular saws.

• Block, Brick, Concrete, General Purpose, Pavers
• Dry/Wet Use, Polished, Sintered
• 10 Inch Segmented Rim
• 5/8" Arbor
• laser welded

User questions & answers

Question:	Will this work on my Ryobi cordless circular saw
Answer:	Below is the answer the person I bought the blade for had provided: I did not purchase the 12" one, I purchased the 4.5" one. As for your 4,000 RPM question, if you zoom in on the image, you can see that your blade is good for 5,500 RPM. I did buy a cheaper 10" steel cutting blade (Lenox) for a cutoff saw. It was not even in my top 3 after reading opinions and price, because amazon does not give max RPMs for all of their different brands. I had to dig around the internet to find the blade speeds and wound up selecting the Lenox, because my top 3 were not rated at the higher RPMs. Also, I had to eliminate some of those favorites due to arbor size. That is also an important factor. As for the make and model of your saw (I am not familiar with the Husqvarna K760), I would not dwell on that as much as arbor size and max RPM (IMO). I hope that it helps.
Question:	Will this work for a chop saw
Answer:	Yes, it will cut any size rebar but be prepared for lots of sparks. My advice if you have a bunch of rebar to cut, rent a rebar cutter.
Question:	When cutting brick, is the cut smooth or fine, no chipping
Answer:	I am sorry I can not answer the question just never had an opportunity
Question:	Will this fit the skilsaw spt70wm-01 15 amp 10-1/4" magnesium sawsquatch worm drive circular saw? are all diamond shaped arbors the same
Answer:	Hello, Yes, the 12" and 14" blade will work with the Husqvarna K760 saw. The MAX rpm is 5,500. Thank you, Customer Service Team Delta Diamond Products, Inc.

Product description

The Forney 72358 14-Inch Type 1 Masonry Asphalt Cutting Wheel is silicon carbide and dual fiberglass reinforced. Used primarily on ceramic, masonry, plastic and other non-ferrous materials. Quality made to provide fast, safe, dependable service. Designed to be used on stationary saw machines only. 14-Inch (355. 6 mm) by 5/32-Inch (3. 96 mm) with 1-Inch (25. 4 mm) arbor. C24R-BF with Max 5, 400 RPM. Typical Spec Example A24R-BF: A=Used for Steel, 24=Grit (Coarse), R=Medium to Hard Bond. The First series of letters indicates Grain Type; A=Aluminum Oxide (Used in Metal Applications) C=Silicon Carbide (Used for Masonry Applications) ZA= Alumina Zirconium used for (Stainless Steel and Ferrous Metal Applications) TA=Ceramic Treated Aluminum Oxide (Used for Metal Applications) The Second series of letters indicates Grain Size or Grit; 8-24=Coarse, 30-60=Medium, 70-180=Fine and 220-Up=Hard. The Third series of letters indicates Bond Hardness; A-N=Soft, O-S=Medium and T-Z=Hard. The Fourth series of letters indicates type of Bond; BF=Retinoid Fiberglass Reinforced (Double Bonded), E=Shellac, R=Rubber and V=Vitrified. Wheel Types; Type 1=Flat Wheel for Cutting, Type 27=Depressed Center Wheel, Type 28=Hat Shaped for Grinding and Type 29=Flap Disc for Grinding and Finishing. Note: Harder Wheel have a longer life where a softer wheel will cut faster. Fine Grain=Long Life=Slower Cutting and Grinding. Coarse Grain=Short Life=Fast Cutting or Grinding. Claims for must be made within 90 days of the date of purchase. Proof of purchase required. This does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

• Silicon carbide and dual fiberglass reinforced for strength with masonry applications
• Used primarily on ceramic, masonry, plastic and other non-ferrous materials
• Quality made to provide fast, safe, dependable service
• Designed to be used on stationary saw machines only

Product features

Aluminum Oxide

Fused aluminum oxide (AO) is the most common abrasive grain in use today. AO is extremely tough and durable but has no clearly defined crystal structure; when the grain wears it produces rounded edges.

Suggested applications:

Aluminum and ferrous metals.

Zirconia Alumina

During manufacturing aluminum oxide and zirconia are quenched from molten form which gives the grain a crystalline structure. This gives the grain a longer cutting life and is especially suited to coarser stock removal applications.

Suggested applications:

Heavy-duty grinding on all ferrous and non- ferrous metals.

Silicon Carbide

Silicon carbide is the hardest of all common abrasive materials. It is very sharp, but friable, leaving new sharp edges for cutting. It is initially fast-cutting but has a short life span. It is ideal for use on non-ferrous metals like aluminum, brass, bronze, magnesium and titanium.

Suggested applications:

Non-ferrous metals, non-metallics.

Product description

We has a very extensive standard selection of economically priced segmented blades for general contractor usage.

The Concrete Saw LSS series is designed to provide fast, smooth cutting in a variety of materials, including brick,block,paves,concrete and stone.



offers industrial diamond tools, power tools, and wide range of tools accessories.

wet dry polishing pads, diamond hand polishing pads, diamond hole saw core drill bits, cup wheels, diamond profile wheels, router bits, tuck point blades,

diamond saw blades etc are durable, aggressive and used in many natural stone fabrication shops, artificial stone manufacturing shops worldwide.



gives you the best shopping experience,Order Now Risk-Free!



THE SIZE AND USE OF DIAMOND SAW BLADES：

concrete saw diamond saw blades 14 blades concrete saw blade saw concrete saw 14 inch chop saw blade 14 diamond blade concrete

saw blades bricks for garden concrete diamond blade granite cutting tools granite saw rock saw for cutting rocks concrete block

concrete paver granite block long garden hose 200 feet stone cutter garden saw concrete cutter 18 x 18 concrete pavers concret real rock 14

• ❁Our concrete saw Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• ❁Concrete saw blade Can be used wet or dry. For light or medium duty cutters.Thinner kerf to increase speed of cut while minimizing dust
• ❁Sintered diffusion bonded.High Performance diamond matrix provides 150x's the life of conventional abrasives and enhanced material removal
• Segment height 10mm. Arbor 1 inch -20mm . Size is 14"x.125"x.395"/10mm.
• ❁This diamond blade belongs to WHIRLWIND USA Diamond Segmented Lighting Series,Factory direct Sale & Fast shipment,Quality is guaranteed。

Product description

12" Wood Cutting Saw Blade

Pack Item: 1 PCS

Remark:

1.Please conform rotate direction before using

2.Only for woody material cutting, don't use for metal and masonry

• Production Name: 12" Wood Cutting Saw Blade, Teeth: 80T Carbide Tip, Diameter: 12" / 300mm,Plate Thickness: 0.09"/2.2mm , Arbor: 1"(25.4mm)
• Max RPM: 6000,Kerf: 0.1"/2.54mm,, Hook Angle: 10-15 Degree;Tooth design: ATB,Fast and Smoothly Wood Cutting
• For purpose combination blade, fits for ripping and crosscutting on soft/hardwood, polywood, chipboard,Good on Laminate,not for metal cutting
• Fine Finishes,Well-Balanceed, Anti-Vibration,Hard and High quality carbide tip provide the best in precision, durability and performance
• Widely use for Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws,save your time and energy

User questions & answers

Question:	Busco algo q corte concreto y metal al mismo tiempo
Answer:	Arbor size is 1" without ring; 20mm using ring.
Question:	Is there a Bushing for the 5/8 and 7/8 Arbor
Answer:	Yes
Question:	Is 3.2mm the kerf dimension
Answer:	Yes. We used it to cut retaining wall blocks.