10 best freud band saws

Product description

Freud 8" x 24T Super Dado Sets (SD508)



Chip Free Dadoes in Veneered Plywoods and Laminates The SD500 Series dadoes were the first dadoes to include a 3/32 inch thick chipper. This allows the cut width to be adjusted in 1/32-inch increments and doubles the number of slot widths available. Many plywoods are being manufactured 1/32-inch undersized from the nominal size and this allows you to cut dadoes that will fit these materials with less shimming. We have also included a shim set with the dado for fine adjustments. Freud's new Square Tooth(tm) design utilizes a shorter and thicker tooth which reduces drag in the cut and reduces the materials guiding effect. The Square Tooth(tm) design also increases the number of sharpenings you can obtain. The SD500's use an extra thick and stiff outside plate, eliminating the hub. The gullet design provides maximum chip ejection. Both of these features prevent chip buildup within the stack. Application: Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood, or hardwood. Caution Carbide tips should never come into contact with each other. Always use both outside blades and never use chippers alone or with just one outside blade.



The SD500 Series of dado sets cuts everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super smooth, flat bottom. The SD500 Series dado sets were the first to include a 3/32" thick chipper and has the flexibility of an adjustable dado to handle today's undersized plywood. This allows the cut width to be adjusted in 1/32" increments and doubles the number of slot widths available. A shim set is also included with the dado set for fine adjustments. Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood or hardwood.



GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

GRR-RIPPER 3D Push Block is a must-have for any table saw user. A true MICROJIG Innovation. Essential Protection It's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip with surgical precision. Extreme Control The powerful green grr-rip gives you a commanding hold over the work piece for total control. GRR-RIPPER has three legs to give you three-directions of control on the keeper and off-cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning. Unmatched Precision Stabilize your cut with the built-in Balance Support to square your cut and safely handle the smallest parts of wood when cutting on the table saw or router table. Rip as accurate as a 1/4" Standard without readjusting the fence. Fully Adjustable The adjustable Center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. GRR-RIPPER handle can be angled and adjusted for your comfort and control. Total Versatility GRR-RIPPER videos feature over 30 unique uses on the table saw, router table, jointer, and band saws. The powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents. Trusted Everywhere Over 400, 000 GRR-RIPPERs sold worldwide. Join the smartest woodworkers worldwide. MICROJIG is a true innovator and founded by woodworker, Henry Wang, in his home garage. MICROJIG has now sold over 1 Million Products in over 20 Countries! GRR-RIPPER - Don’t Use a Table Saw Without It. Work Safer. Work Smarter. Made in the USA. 100% Satisfaction. Extended 3-Year . Watch the action video and add to your cart today! Using two GRR-RIPPERs allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing.

• Product 1: 8" Dado Set, 5/8" Arbor
• Product 1: Set includes 2 blades, 6 chippers, shim set and carrying case.
• Product 1: Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
• Product 1: Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
• Product 2: Protect hands and prevent kickback like never before
• Product 2: Powerful high-friction durable grip for extreme hold
• Product 2: Precision cutting and control down to 1/4" Ripping
• Product 2: Fully adjustable for easy handling

User questions & answers

Question:	if blade won't fit on some saws due to short arbor when dado set at max and still allow nut to fasten, what arbor length is needed
Answer:	Email me with the length of your Arbor and I will go to my shop and measure the Dado set. I have the grizzly 2 Hp hybrid saw and it is a bit quickly to get on, but one on it rocks. My email is [email protected]
Question:	Has any owner of this dado set had the blades resharpened
Answer:	The dado set can be sharpened. They need to be re-sharpened as a set. Visit www.freudtools.com and locate a sharpener near you.
Question:	I notice most sets are around $100. Is this set worth the extra money compared to the other sets
Answer:	If you only have one dado to make and the $100.00 set is the right size then buy that one. You can do this three more times and save money. If you have to make more than four dados you will save money with the Freud kit.
Question:	I also have a Bosch 4100 10 inch work saw and can't determine if this dado will work on that saw. anyone
Answer:	Ok there is some confusion here. The site above shows all the Freud blade sizes from the 10 inch with the 1 inch arbor hole to the six inch with a 5/8 arbor hole. The 10 inch is WAY too big for the Bosch 4100 or any portable saw. So is the 8 inch. I think these saws would struggle even with the six inch is pushing it. These saws just don't have the power and then there is a question of safety. Think about it, this is a lot of rapidly spinning metal.

Product description

Freud 6" x 10T Pro Dado Set (SD206)

Freud's quality and craftsmanship in a stacked dado set, but at a wobble dado price. The negative hook angles make flat botom grooves and virtually splinter-free cuts. It has two outer blades with five two wing chippers. This makes it ideal for underpowered saws because it requires less power to feed. All blades come with Freud's anti-kickback design. This set will produce grooves from 1/4" to 13/16" in 1/16" increments. This set comes with shim set and carrying case as well as instructions on how to make basic dado sizes. Feature Freud's Tico Hi-Density carbide.

Freud's quality and craftsmanship in a stacked dado set, but at a wobble dado price! The negative hook angles make flat bottom grooves and virtually splinter-free cuts. It has two outside blades and three 2-wing chippers. This makes it ideal for underpowered saws because it requires less power to feed. All blades ande chippers come with Freud's anti-kickback design. This resharpenable set will produce grooves from 1/4" to 7/8" in 1/16" increments. This dado set comes with a shim set and carrying case as well as instructions on how to make basic dado sizes.



GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

GRR-RIPPER 3D Push Block is a must-have for any table saw user. A true MICROJIG Innovation. Essential Protection It's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip with surgical precision. Extreme Control The powerful green grr-rip gives you a commanding hold over the work piece for total control. GRR-RIPPER has three legs to give you three-directions of control on the keeper and off-cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning. Unmatched Precision Stabilize your cut with the built-in Balance Support to square your cut and safely handle the smallest parts of wood when cutting on the table saw or router table. Rip as accurate as a 1/4" Standard without readjusting the fence. Fully Adjustable The adjustable Center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. GRR-RIPPER handle can be angled and adjusted for your comfort and control. Total Versatility GRR-RIPPER videos feature over 30 unique uses on the table saw, router table, jointer, and band saws. The powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents. Trusted Everywhere Over 400, 000 GRR-RIPPERs sold worldwide. Join the smartest woodworkers worldwide. MICROJIG is a true innovator and founded by woodworker, Henry Wang, in his home garage. MICROJIG has now sold over 1 Million Products in over 20 Countries! GRR-RIPPER - Don’t Use a Table Saw Without It. Work Safer. Work Smarter. Made in the USA. 100% Satisfaction. Extended 3-Year . Watch the action video and add to your cart today! Using two GRR-RIPPERs allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing.

• Product 1: 6" Dado Set, 5/8" Arbor
• Product 1: Set includes 2 blades, 3 chippers, spacers, shim set and carrying case.
• Product 1: Negative hook angles
• Product 1: Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
• Product 2: Protect hands and prevent kickback like never before
• Product 2: Powerful high-friction durable grip for extreme hold
• Product 2: Precision cutting and control down to 1/4" Ripping
• Product 2: Fully adjustable for easy handling

User questions & answers

Question:	what is the depth this blade will cut
Answer:	I have to revise my answer. The blade will only raise to about an inch and a quarter (1-1/4 inch) above the table on my Powermatic 10-inch table saw, so max depth is about 1-1/4 inch, not 3-11/16.
Question:	How many RPMs is this rated for
Answer:	Per what it says on the blade - 11,000 RPM.
Question:	How do you open the case to remove the dado set
Answer:	Unscrew the black knobs in the center of the dado
Question:	What is the criteria for deciding between a 6" and 8" blade on a 10" table saw
Answer:	There are several factors. First is the power of your saw motor. For 1.5HP and less you should use a 6" dado blade. If you have more than 2HP go with the 8. Another factor is the depth you want to cut. If you are not going deeper than 1.25" you only need a 6". Third, most 6" simply weigh less an put less wear and tear on your motor.

Product description

Freud D0724DA 7-1/4-Inch Diablo Demo Circular Saw Blade

• Specially formulated to deliver superior cutting life and durability
• The blade is designed to provide exceptional performance and impact resistance through its radical new lock-tooth design
• A high-performance three-tooth grind sequence
• Item Package Dimension: 8.0" L x 9.0" W x 1.0" H

User questions & answers

Question:	Guys, makita 5806b circular saw has a bore (middle hole) of 20 mm, how can i male a freud diablo blade fit in it
Answer:	The Diablo blade has an imperial measurement of 5/8" (0.625"), and your Makita circular saw is 20mm which in imperial measurement is 0.7874", it means your circular saw shaft is 0.1624" bigger than the hole in the saw blade. You will have to look up the internet to find a saw blade with a 20mm bore. The only other way is to drill out the mounting hole to 49/64" and use a 20mm Reamer.
Question:	How will this blade do to cut sheet metal roofing
Answer:	Not very well. It’s made for wood. You need a metal cutting blade for that
Question:	The inner circle thing popped out, any idea how I can make it work in my saw still
Answer:	I've never had one with an inner circle piece like the ones on grinder blades. If the diamond part came out its mainly only for worm drive saws if I remember correctly
Question:	What is the kerf for this blade
Answer:	Well, it's probably less than 1/4 in. But...........why does it matter? I bought this blade to take down 3 old sheds and it did a fantastic job! It cut thru nails and wires and tin etc............ It did the job perfectly. That is probably why they call it a DEMO blade! Demo=Demolition!!!!!!!!!!!!!!! It is NOT a finesse cutting tool.

Product description

DIABLO PRUNING 9 5TPI 5 PK

• 5 Pack of blades
• 9-inch blade length
• Fleam Gind blade
• A one-of-a-kind tip design enables faster and easier plunging
• Hardened cutting edge for long and durable cutting life, Imported

User questions & answers

Question:	Just wondering why the picture of the 5 splayed like a fan display broken teeth but the vertical one in its sheath shows all teeth
Answer:	I'm not sure why the picture shows them like that, but I will say these things are awesome I flew through trimming my queen palm tree. I was shocked how good they performed.
Question:	What is TPI on these blades
Answer:	Teeth Per Inch
Question:	The description says 5 blades, but in the "compare to similar items" it says number of items "1". Does amazon mean one 5-pack
Answer:	I received 1ea. 5-pack.
Question:	Is this a 5-pack or 1-pack? Description says "5-pack" but Tech Details say "pack of
Answer:	I got this last year and it's a pack of 5 blades

Product description

"The Diablo 10in. 50 Tooth Combination Circular Saw Blade is ideal for ripping and crosscutting wood and wood composites, while leaving a smooth finish. This blade is the best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo's large gullet provides the chip removal space required while ripping, and the close grouping of teeth with the set provides the smaller bit size required when crosscutting. Features a super-thin laser cut kerf, Perma-SHIELD nonstick coating, tri-metal shock-resistant brazing and more. For use on miter saws and table saws. Arbor Knockout No, Arbor Size in. 5/8, Corrosion Resistant Yes, Teeth qty. 50, Blade Diameter in. 10, Blade Speed RPM 7,000, Blades qty. 1, Tip Type Carbide, Tooth Grind Combination, Anti Stick Rim Yes, Blade Use Wood, wood composite. Super-thin laser cut kerf for fast, durable and clean cuts TiCo hi-density carbide provides a controlled carbide wear that stays sharper longer Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body for longer life and a sharper cutting edge For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips. Model # D1050X Diameter 10" Machine Use Miter Saw, Table Saw Application Combination Teeth 50 ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15 Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time. The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping. Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF). Produces Smooth, Quiet Cuts with Laser-Cut Kerf The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time. An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life. Features Shock-Resistant Carbide for Long-Lasting Precision So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion. Fits Miter and Table Saws The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws. This product is covered by Freud's Limited Lifetime Warranty. What's in the Box Freud D1050X Diablo 10-Inch Combination Saw Blade. "

For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips.

Model # D1050X Diameter 10" Machine Use Miter Saw, Table Saw Application Combination Teeth 50 ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15°

Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites

Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time.

The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF).

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1050X Diablo 10-Inch Combination Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the best choice for a table saw when one blade is needed for ripping and crosscutting.

• The product is 10x50T Diablo Blade
• Easy to use
• The product is manufactured in China
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Imported

User questions & answers

Question:	Are these really made in China
Answer:	From what I have read, the Diablo series is made in Italy but who knows what really goes on these days? I am happy with the blade and at the price it is a good value. Could they have been made in Italy at one time and then sourced/made in another country later on? I can't say.
Question:	Why are the vents just printed on
Answer:	The vents are actually through-cut, then filled with a rubbery material. They really do work. These blades are far quieter than the stock blades that come on most saws.
Question:	Would you recommend this blade for ripping finished hardwood? I am looking for a good blade for ripping cabinet fillers, etc
Answer:	It depends on what the cabinets are made out of. If they're solid wood, yes absolutely this blade will do great, it leaves almost sanded smooth edges if your saw is setup right. If its plywood, or particle board, or mdf, I'd use a diablo blade meant for that kind of wood like the freud d1090x 90 tooth blade, that will leave sanded smooth edges on a plywood board, and wont tear up your veneer like the 50 tooth blade might.
Question:	Would this blade cut a flat bottom dado
Answer:	No - The better version, if you want to make smooth multiple passes for a dado is the more expensive, Freud LU84R011 which has a flat bottom edge on the first tooth after each gullet.

Product description

Diablo's new steel Demon carbide reciprocating blades feature 10 TPI and are designed specifically for cutting medium metals and high strength alloys.

• High performance Carbide for greater durability and 50x cutting performance in medium metal applications
• Enhanced Carbide to blade connection for extreme impact resistance
• 10 TPI tooth geometry for clean/smooth finishes on medium metal applications
• Perma-shield Non-Stick coating for less heat and friction
• Quantity: 3 per pack

User questions & answers

Question:	will these blades cut wood
Answer:	It will do it but not the ideal blade for that purpose. I would choose the Freud DS1214AFC5 Flush Reciprocating Blade, 12". These are made to flex and are thinner.

Product description

10 X 50 X 1 FERROUS CERMET CSB

• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB

User questions & answers

Question:	What is the required rotational speed for the 10" steel demon
Answer:	I've cut 0.125" wall 1.5" steel tubing. Works pretty well but won't last for more than about 15 cuts in this rather strong steel. My band saw is better but I always keep one of these blades on hand for precision cuts. On thinner metal, like butter.
Question:	So confusing max rpm is 5800 or 1800 ? why I saw it in my local homedepot it says 5800 rpm on its package
Answer:	That is the limit of its abilities. The key is to set your saw depth deep, so each tooth is in contact with the steel very briefly. If you set the blade shallow, as if you were cutting 1/4" plywood, you will overheat the teeth and be lucky to cut 12" before the blade is destroyed.
Question:	I want to ask if this blade will work with evolution mitre saw
Answer:	Lol....I operate On or Off...I prefer the full ON position to get the job done and move on!!
Question:	Was gonna try this on my hitachi compound miter saw. It is 5,000 rpm has anyone used this blade running at this rate
Answer:	12 Pt., SAE Wrenches: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4"

Product description

The Diablo Steel Demon is designed for cutting ferrous metals mild steel only, such as steel studs, angle iron, flat bar, EMT conduit, all threaded rod and more. High-performance blade features super thin laser cut kerf for effortless cutting performance. Tico Hi-density carbide provides a controlled carbide wear that stays sharper longer. Perma-Shield nonstick coating shields the blade against heat, gumming and corrosion. Laser cut stabilizer vents trap noise and vibration and stabilize the blade. Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact. Laser cut heat expansion slots allow blade to expand due to heat build-up, keeping the cut true and straight. Arbor Knockout No, Arbor Size in. 5/8, Blade Diameter in. 6 1/2, Blade Speed RPM 11,000, Blades qty. 1, Corrosion Resistant Yes, Engineered Venting Yes, For Cordless Saws Yes, Teeth qty. 48, Tip Type Carbide, Tooth Grind TCG, Blade Use Steel cutting. Super-thin laser cut kerf for easy cutting Tico high-density carbide stays sharper longer Perma-Shield nonstick coating protects blade Laser cut stabilizer vents Tri-metal shock resistant brazing Laser cut heat expansion slots

From the Manufacturer

Steel Demon. Ideal for cutting steel studs, steel pipe, and steel sheet. For most mild steels under 1/8". Triple Chip Design for longer cutting life in metal. Perma-Shield coating shields blade against heat, gumming, and corrosion. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri-metal shock-resistant brazing for stronger carbide teeth.Features Freud's TiCo Hi-Density Carbide. Cuts up to 40x longer than abrasive discs. 6-1/2" diameter, 48t TCG, 5/8" arbor.

• Efficiently cut through ferrous metals quickly and accurately, leaving clean, burr free cuts
• Ideal for cutting steel studs, steel pipe, and steel sheet
• Ideal for most mild steels under 1/8 in. Thickness
• Features Freud's TiCo Hi-Density Carbide with titanium for long life and a flawless finish
• Triple chip design for longer cutting life in metal
• Laser cut Stabilizer vents trap noise and vibration and stabilize blade
• Tri-metal shock-resistant brazing for stronger Carbide teeth.

User questions & answers

Question:	Would this cut 20 gauge steel
Answer:	Per the packaging, "Recommended cutting limits; Steel stud, channel pipe tubing Max 1/4" wall thickness Min 1/16" wall thickness. Plate, bar stock Max 1/4" thickness Min 1/16" thickness." 1/16" ≫ 20ga
Question:	Will this work for cutting Hard Wood
Answer:	it should work with no problem
Question:	How does this blade compare to the new abrasive diamond blade for circular saws
Answer:	I don't know for sure. Have not seen one used. I use mine to cut top rail and posts for chainlink fence and it works fine.
Question:	made in china
Answer:	The blade doesn't say made in China and doesn't feel like it when you use it either

Product description

This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3/4" thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.

Designed for serious woodworkers, the 10-inch Freud LM72R010 Heavy-Duty Rip Saw Blade features an ultra-tough Perma-SHIELD coating that reduces heat and friction. It delivers smooth, fast cuts through hard- and softwood. Thanks to a rigid blade body and 24 oversized, flat-top teeth with TiCo high-density carbide tips, this is one dependable, long-lasting blade. Plus, its well-balanced, anti-vibration design means there's no need to use stabilizers with it.

Professional-Grade Design for Accurate Glue Line Cuts

Offering fast, "glue line" precision cuts and an anti-kickback design, this heavy-duty rip saw blade handles tough industrial ripping tasks without requiring you to add any stabilizers to your setup. It's ideal for working with hard- or softwoods that are 3/4 to 2-3/4 inches thick, and it can be used in gang-rip operations. This versatile blade handles crosscuts with chipboard, plywood, or laminate, and can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.126 kerf.

The extra-large, flat teeth featured on this blade leave a smooth, splinter-free finish that eliminates the need for sanding and jointing. This large-tooth design also allows the blade to be safely sharpened more times, prolonging the life of the blade and saving you money. And the large gullets between these teeth ensure easy chip removal.

Well-Balanced, Anti-Vibration Design

This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.

High-Density Carbide for Maximum Cutting Performance

This heavy-duty rip saw blade's 24 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "ripping blend." This blend offers a mix of improved density, hardness, corrosion resistance, heat resistance, and impact resistance that's ideally matched to the demands of ripping large quantities of thick, hard wood.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--once again, saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup

Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing

An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box

Freud LM72R010 Heavy-Duty Rip Saw Blade with Perma-SHIELD--10-inch diameter, 5/8-inch arbor, 24-tooth design.

From the Manufacturer

This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut.These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3/4" thick. Freud's Tico Hi-Density Carbide, Non-Stick Perma-Shield Coating, Laser cut anti-vibration slots, Anti-kickback design, and Tri-Metal brazing.With this ultimate heavy duty ripping blade there is no need for a stabilizer.

• 10" Blade Diameter, 24 Teeth, FLAT Grind, 5/8" Arbor, .126" Kerf, 20° Hook Angle
• Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
• Extra Large, Flat Tooth Design leaves a smooth finish without the need for sanding or jointing
• Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
• Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

User questions & answers

Question:	Will this blade work in my g0524 straight line ripnsaw at 4500 rpm
Answer:	I thought it was self-subricated
Question:	What is the proper blade height for ripping
Answer:	Yes friend. Our 3018 Pro engraving machinebe can engraved plastic, wood, acrylic, pvc, pcb, wood or the like material.
Question:	Is it a flat top blade
Answer:	yes
Question:	Is this full kerf blade ok for using in a DeWalt contractor saw, or should I use a thin kerf
Answer:	There is more to this answer. I have the unit that will move the router in and out. The accuracy can degrade toward the edges. So a better questions is, "What is the maximum area this will engrave accurately?". The answer to that is. It depends. The magic is in the software control. You run a test pattern, and make measurements, that tell the program how to change everything, to maintain accuracy, even at the ends. You will want to calibrate this for parts that are going to cover the board. My frame is also setup for a full 4x8foot sheet. So, short answer is 4' x 8'.

Product description

8 INCH STACKED DADO SET

• 8" Dado Set, 5/8" Arbor
• The set includes 2 blades, 3 chippers, 3 spacers and a shim set for micro adjustability
• Negative hook angles
• Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
• Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner

User questions & answers

Question:	Can I use the 6" or 8" set on my Kobalt 10" table saw (model kt
Answer:	If it is designed to use dado blades it should work. You may need a wider insert around the blade due to the extra width of the blades. Your saw manufacturer should have these if the saw is in fact made for dado blades.
Question:	Can i use to portable dewalt table saw
Answer:	Not if your saw is a DWE7480 or the DW745. The arbor is too short to hold a dado stack.
Question:	I have a ‘Dewalt table saw for jobsite, compact, 8-1/4-inch (dwe7485). Has anyone used this dado set in this model
Answer:	I don’t know the answer to your specific question, but it is generally recommended to use a 6” dado stack with portable saws. The good thing is that 6” stacks are generally cheaper than their equivalent 8” stack.
Question:	In the tech. details it states, "measurement system, metric",but in the description it states "makes flat bottom grooves from 1/4" to 13/16" in
Answer:	I have been using the Freud 8" SD2085 for 6 months on several projects using my DeWalt DWE7491 Table Saw. The projects have ranged from Pine to Teak and Ipe. When stacked in-accordance-with the supplied chart, you can cut any Dado from 1/4" to 13/16" in 1/32" steps, 19 settings. These dados are spot-on in inches. I highly recommend this Dado set.!