10 best diablo table saws

Product description

"The Diablo 10in. 50 Tooth Combination Circular Saw Blade is ideal for ripping and crosscutting wood and wood composites, while leaving a smooth finish. This blade is the best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo's large gullet provides the chip removal space required while ripping, and the close grouping of teeth with the set provides the smaller bit size required when crosscutting. Features a super-thin laser cut kerf, Perma-SHIELD nonstick coating, tri-metal shock-resistant brazing and more. For use on miter saws and table saws. Arbor Knockout No, Arbor Size in. 5/8, Corrosion Resistant Yes, Teeth qty. 50, Blade Diameter in. 10, Blade Speed RPM 7,000, Blades qty. 1, Tip Type Carbide, Tooth Grind Combination, Anti Stick Rim Yes, Blade Use Wood, wood composite. Super-thin laser cut kerf for fast, durable and clean cuts TiCo hi-density carbide provides a controlled carbide wear that stays sharper longer Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body for longer life and a sharper cutting edge For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips. Model # D1050X Diameter 10" Machine Use Miter Saw, Table Saw Application Combination Teeth 50 ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15 Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time. The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping. Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF). Produces Smooth, Quiet Cuts with Laser-Cut Kerf The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time. An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life. Features Shock-Resistant Carbide for Long-Lasting Precision So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion. Fits Miter and Table Saws The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws. This product is covered by Freud's Limited Lifetime Warranty. What's in the Box Freud D1050X Diablo 10-Inch Combination Saw Blade. "

For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips.

Model # D1050X Diameter 10" Machine Use Miter Saw, Table Saw Application Combination Teeth 50 ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15°

Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites

Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time.

The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF).

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1050X Diablo 10-Inch Combination Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the best choice for a table saw when one blade is needed for ripping and crosscutting.

• The product is 10x50T Diablo Blade
• Easy to use
• The product is manufactured in China
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Imported

User questions & answers

Question:	Are these really made in China
Answer:	From what I have read, the Diablo series is made in Italy but who knows what really goes on these days? I am happy with the blade and at the price it is a good value. Could they have been made in Italy at one time and then sourced/made in another country later on? I can't say.
Question:	Why are the vents just printed on
Answer:	The vents are actually through-cut, then filled with a rubbery material. They really do work. These blades are far quieter than the stock blades that come on most saws.
Question:	Would you recommend this blade for ripping finished hardwood? I am looking for a good blade for ripping cabinet fillers, etc
Answer:	It depends on what the cabinets are made out of. If they're solid wood, yes absolutely this blade will do great, it leaves almost sanded smooth edges if your saw is setup right. If its plywood, or particle board, or mdf, I'd use a diablo blade meant for that kind of wood like the freud d1090x 90 tooth blade, that will leave sanded smooth edges on a plywood board, and wont tear up your veneer like the 50 tooth blade might.
Question:	Would this blade cut a flat bottom dado
Answer:	No - The better version, if you want to make smooth multiple passes for a dado is the more expensive, Freud LU84R011 which has a flat bottom edge on the first tooth after each gullet.

Product description

Fine finish blades let trim crews get the most out of sliding or “chop” style Miter saws, as well as jobsite or workshop Table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, Pine, melamine, plywood, and Moulding. 1" Diameter, 6T ATB, 5/8" Arbor, 15 degree hook angle. Tico Hi-Density carbide specifically designed for each application to increase performance Parma-Shield Non-Stick coating protects from heat, gumming, & corrosion super thin laser cut kerf for fast, durable, and clean cuts tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body – warrants a longer life and sharper cutting edge. Ideal for: high quality crosscuts and rip cuts in wood, plywood & melamine suggested projects: trim, remodeling/demolition

For a clean-cutting blade that creates smooth finish cuts in material such as veneer plywood and delicate hardwood, look no further than the D1060X Diablo 10-Inch Fine-Finish Saw Blade. This is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. This blade's high tooth count minimizes grabbing of the workpiece, producing cuts that require little to no sanding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Makes Clean Finish Cuts in Wood and Delicate Molding

Achieving attractive results when working with fine finish material is all about clean, accurate cuts. The Freud D1060X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.

Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making smooth crosscuts in fine finish work. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1060X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 60 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1060X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1060X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1060X Diablo 10-Inch Fine-Finish Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. Features Freud's TicoHi-Density Carbide , a Perma-Shield coating keeps this blade free from gumming and corrosion, Laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life, and tri-metal brazing. This particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.10" diameter, 60t ATB, 5/8" arbor, 15 Degree hook angle.

• TiCo Hi-Density carbide specifically designed for each application to increase performance
• Perma-SHIELD Non-stick Coating protects from heat, gumming, & corrosion
• Super thin laser cut kerf for fast, durable, and clean cuts
• Made in Italy

User questions & answers

Question:	I just want to one blade for my compound bevel miter saw would you recommend this? Thanks
Answer:	I have no complaints with the D12100x. I’m a trim carpenter and impressed with the blade. I’ve always had either 60 or 80 tooth blades and as long as they were sharp, I really couldn’t tell the difference in cuts.
Question:	Will this cut exotic wood tha tis 4" that is at the top of the Janka scale? Or would it be better to buy a higher tooth count? Thanks
Answer:	I can’t answer about this specific blade, but I have a Forrest table saw blade and it’s really worth the extra money. I use the Freud on my chop saw and am very happy with the performance. I probably wouldn’t go with Forrest for my chop saw unless the price was very close.
Question:	Is this American made
Answer:	The hook angle is 7 degrees. I wanted to know the correct answer and found it from manufacturer's product page: http://www.diablotools.com/products/product/D12100X
Question:	how thin is the actual cut kerf
Answer:	It is the standard 1/8" thickness.

Product description

10 X 80 ULTRA FINISH

For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Makes Clean, Chip-Free Cuts in Delicate Finish Work

Achieving premium results when creating finish crosscuts in ultra-fine materials is all about clean, accurate cuts. The Freud D1080X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.

Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making ultra-fine finish crosscuts in delicate pieces. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1080X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 80 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1080X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1080X is a great addition to your workshop because it's designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.

• The product is 10x80T Diablo Blade
• Easy to use
• The product is manufactured in China
• 10-inch 80T ultra fine finish cut-off blade with a laser-cut 5/8-inch arbor
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp, Imported

User questions & answers

Question:	what is the hook angle on this blade
Answer:	Clean windows then use water to apply. Should come off plastic.
Question:	How are cuts with this blade on base boards and trim? Don't have answer if you haven't done so
Answer:	You can not. Once you put this on something it has adhesive on it so you will only be able to use it once.
Question:	Will this blade fit my crafstman table saw
Answer:	White
Question:	I bought this blade and wasn't sure if it only does crosscuts or is it designed to rip also? I know it has more teeth so I take it will go slower
Answer:	It is not intended to stick to fabric, only clean, hard surfaces.

Product features

Freud D1080X Diablo 10" 80-tooth ATB Saw Blade w/5/8" Arbor&PermaShield Coating

Ultra Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Flawless crosscuts in wood with minimal rework. Flawless finish in melamine & veneered plywood.

• TiCo Hi-Density carbide specifically designed for each application to increase performance
• Perma-SHIELD Non-stick Coating protects from heat, gumming, & corrosion
• Super thin laser cut kerf for fast, durable, and clean cuts
• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
• Hardened Steel Body – provides a longer life and sharper cutting edge.

Product description

2582-1448 features: -circular saw blade. -Ideal for wet lumber. -Super thin laser cut kerf. -Perms-shield Non-Stick coating. Product type: -circular. Dimensions: overall length - end to end: -7 inches. Overall height - top to bottom: -7 inches. Overall product weight: -0. 42 pounds.

• 7-1/4" diameter 5/8" arbor with diamond knockout 0. 059"
• 7-1/4" 60T Diablo Ultra Finish Work Table Saw Blade The Diablo Ultra Finish
• Used in miter saws or table saws,
• 7-1/4" Diameter 5/8" Arbor with Diamond Knockout 0. 059"
• 7-1/4" 60T Diablo Ultra Finish Work Table Saw Blade The Diablo Ultra Finish
• Used in miter saws or table saws,
• 7-1/4" Diameter 5/8" Arbor with Diamond Knockout 0.059"

User questions & answers

Question:	Is this blade appropriate for cutting plywood shelves? They have another one noted for plywood but it's twice the price
Answer:	The Kreg Crosscut Station can be used on circulars saws with a blade size of 5 1/2" to 7 1/4".
Question:	is this blade good for cutting counter tops
Answer:	The Kreg Crosscut Station is designed to only make 90 degree cuts.
Question:	Why is one of these the same price of a two pack(no sale) at Home Depot? There’s literally no reason to buy from here
Answer:	The Kreg Crosscut Station will work with saws that have a 5 1/2" to 7 1/4" blade.
Question:	Can I use this for plywood, soft and hard wood
Answer:	My miter saw has a clamp that can be placed on either side of the blade and screws forward to press the wood against the back fence, I used that to secure the jig

Product description

The Diablo 10in. 24 Tooth Ripping Circular Saw Blade cuts rough framing lumber, high-quality finish lumber, plywood, OSB and hardwood siding with a smooth, fast and accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo's unique design, extra-tough steel plate and proprietary carbide tips deliver longer life and has a reputation for being a world class house framing tool. Ideal for general construction applications, including fast, efficient ripping and crosscutting. Blade Speed RPM 7,000, Arbor Knockout No, Arbor Size in. 5/8, Blade Diameter in. 10, Tip Type Carbide, Tooth Grind ATB, Blades qty. 1, Corrosion Resistant Yes, Engineered Venting Yes, Teeth qty. 24, Blade Use Framing w/wood, wood composites, Anti Stick Rim Yes. Super-thin laser cut kerf for fast, durable and clean cuts TiCo hi-density carbide provides a controlled carbide wear that stays sharper longer Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion Laser-cut stabilizer vents trap noise and vibration, and stabilizes the blade Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Laser-cut heat expansion slots allow blade to expand due to heat buildup, keeping the cut true and straight Hardened steel body for longer life and a sharper cutting edge For a fast-acting blade that produces clean rip-cuts in a variety of framing material, look no further than the Freud D1024X Diablo 10-Inch Ripping Saw Blade. Ideal for most general-construction applications, this is your go-to blade for slicing through rough framing lumber, high-quality finish lumber, plywood, OSB (oriented strand board), and hardboard siding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips. Makes Fast, Accurate Rips in Framing Lumber and More Achieving premium results when creating frames for houses and other building structures is all about clean, razor-sharp cuts. The Freud D1024X makes this process easy, fast, and precise. This blade features versatile capabilities and quick performance, making it ideal for general-construction jobs.Housing contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for ripping or crosscutting framing lumber. Appropriate application materials include plywood, OSB (oriented strand board), hardboard siding, and both rough and finish lumber. Produces Smooth, Quiet Cuts with Laser-Cut Kerf The Freud D1024X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 24 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time. An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction to the blade, helping extend its cutting life. Features Shock-Resistant Carbide for Long-Lasting Precision So you can count on it over the long term, the Freud D1024X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion. Fits Table Saws The Freud D1024X is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws. This product is covered by Freud's Limited Lifetime Warranty. What's in the Box Freud D1024X Diablo 10-Inch Ripping Saw Blade.

For a fast-acting blade that produces clean rip-cuts in a variety of framing material, look no further than the Freud D1024X Diablo 10-Inch Ripping Saw Blade. Ideal for most general-construction applications, this is your go-to blade for slicing through rough framing lumber, high-quality finish lumber, plywood, OSB (oriented strand board), and hardboard siding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Makes Fast, Accurate Rips in Framing Lumber and More

Achieving premium results when creating frames for houses and other building structures is all about clean, razor-sharp cuts. The Freud D1024X makes this process easy, fast, and precise. This blade features versatile capabilities and quick performance, making it ideal for general-construction jobs.

Housing contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for ripping or crosscutting framing lumber. Appropriate application materials include plywood, OSB (oriented strand board), hardboard siding, and both rough and finish lumber.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1024X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 24 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction to the blade, helping extend its cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1024X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Table Saws

The Freud D1024X is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1024X Diablo 10-Inch Ripping Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This blade is the top choice for contractors who want a smooth finish when ripping. Ideal for ripping oak, pine, pressure treated lumber and plywood.

• TiCo high-density Carbide for increased performance and maximum cutting life
• Perma-shield Non-Stick coating for protection against heat, gumming and corrosion
• Super-thin kerf design for fast and effortless cuts
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life, Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability, Laser cut arbor for accurate blade rotation reducing vibration and premature wear, Imported

User questions & answers

Question:	Looking for a 10"-3/8" circular saw (miter saw) to cut nail embeded pallet wood. don´t know which blade to choose. obviously, not for professional use
Answer:	Although probably not correct, I have cut nails and thin metal pipe, with carbide-tipped blades.
Question:	Good morning, can someone tell me with certainty, what's the origin for these ripping saw blades? (in which country are they manufactured). thank you
Answer:	Good Morning, possibly Hell hence the Brand name "Diablo"...oooh spooky huh?
Question:	Can i use this on a Ridgid portable table saw
Answer:	If your saw accepts 10 inch blades and has a 5/8" arbor, this blade is great for ripping lumber. Check the specifications for your particular saw model. You can also measure the arbor diameter on your saw. Specifications can be found online by searching for "Ridgid" + the model number.
Question:	I hope they mean 0.098" kerf
Answer:	Yes it is 0.098", 2.49mm in metric!
Question:	Can this blade be used for a table saw
Answer:	Yes, it is rated for 3450 rpm which is perfect for a table saw. With 80 teeth it would work best for very fine cuts.
Question:	Can this blade fit in dewalt dwe 7492 table saw
Answer:	If it is a 10" table saw then yes, i have it in mine it is a great blade
Question:	Being Tungsten Carbide tipped can these cut steel
Answer:	No

Product features

Enjoy your cutting travel with OVERPEAK

OVERPEAK is a powerful company foucs on diamond tool products. After years of hard work and accumulation, our company has developed into a Large standardization Enterprises integrating design, production and sales.

OVERPEAK is a gold supplier to global traders and consumers. The company produces more than 10 million circular saw blades every year. Over the years, we have exported our products to many countries and regions all the world and accumulated a large number of customers worldwide.

Business philosophy: "rigorous, focused, professional"

Designer Tom: Innovation to provide the next generation of circular saw blades is at the core of our survival

Quality control: OVERPEAK manages the production workshop and process strictly.Each pair of saw blade must undergo two strict quality checks, including surface finish and Wire fluidity after completion

Why choose OVERPEAK circular saw blades?

OVERPEAK high performance wood saw blade cuts wood like a hot knife through butter, smooth, fast and perfect.

Our saw blades help maximize cutting accuracy and productivity, so you enjoy a great job and be able to complete more tasks in less time.

Key Features:

• Sharp blades: OVERPEAK saw blades are made of harder tungsten carbide, 4 sided grinded blades cut wood like butter
• More durable than others: Our saw blades are made of harder tungsten carbide and have a cutting life 5 times longer than others, professional designed for durability
• Smooth cut: The cut it leaves is so smooth that you may think it has been sanded by 600 grit sandpaper
• No chipping: The blade can be cut straight and realistically, it won't chip in soft wood, and the cutting edge looks like someone has polished it.

What can a good circular saw blade do for you?

Just like the old saying goes: 'A workman must sharpen his tools if he is to do his work well'. A sharp and durable saw blade can improve your work efficiency. If you make a living by cutting wood, or if you do some home building and handmade work, then the first step in your enjoyable cutting journey is to buy a satisfied circular saw in your hand.

If your old blade has a variety of undesirable conditions: it starts to become dull, the blade rolls up, or the cut is not smooth, then it is time for you to start a new attempt. Complaining all day can not help anything, this is where the Overpeak comes in.

Sharp teeth

The unique cemented carbide teeth can pierce wood like butter, helping to improve cutting accuracy and working efficiency.

Durable material

The OVERPEAK blade is made of harder tungsten carbide, which has a cutting life 5 times longer than others. Even after several repeated cutting tests, it will not become dull and warp its blade.

Smooth cut surface

The blade can be cut straightly and realistically, and will never crack in soft wood. The smooth cut it leaves will make you think it has been sanded

Product description

The Diablo 12in. 100 tooth ultra fine circular saw blade is a high-performance blade designed for cutting wood and wood composites. It cuts like a hot knife through butter. Features a super-thin laser cut kerf, Parma-Shield nonstick coating, laser-cut Stabilizer vents, tri-metal shock-resistant brazing and more. For use on 12in. Miter saws and slide Miter saws. Arbor Knockout No, tooth grind Hi-ATB, Arbor size in. 1, tip type carbide, blade diameter in. 12, blade use Wood, wood composites, teeth Qty. 100, blade speed RPM 6, 000, Engineered venting Yes, blades Qty. 1, corrosion resistant Yes. Super-thin laser cut kerf for effortless cutting performance Tic Hi-Density carbide provides a controlled carbide wear that stays sharper longer Parma-Shield nonstick coating shields the blade against heat, gumming and corrosion laser-cut Stabilizer vents trap noise and vibration and stabilizes the blade tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact laser-cut heat expansion slots allow blade to expand due to heat build-up, keeping the cut true and straight

• Iten Package Weight:1.157 Kilograms
• Product Type:Saw Blade
• Item Package Dimensions:1.016 Cm L X33.782 Cm W X38.608 Cmh
• Country Of Origin: China

User questions & answers

Question:	I build furniture using various hardwoods and need a really clean crosscut. would the d12100x or the d1280x produce the cleaner cut
Answer:	Yes, these blade will work with model DC385K.
Question:	Anyone with experience, how does this blade compare with the forrest chopmaster 12-inch x 90t blade, cm12905115 at nearly 4 times the price
Answer:	It should take any sawzall blades.
Question:	What is the hook angle of this blade
Answer:	The blades are 0.35". thick.
Question:	What is the thickness (in mm or inch) of this blade
Answer:	To open the case, you will want to flip the black top up.. The top of the case should open and swing backwards.

Product description

High-performance Diablo steel Demon Circular saw blade with TiCo titanium Cobalt high-density carbide is specifically designed for cutting nonferrous metals such as copper pipe, aluminum and brass, plus plastics and laminates. Thin kerf blade features a triple chip grind tooth design for long life and a clean, burr-free finish. Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability. Perm-shield nonstick coating shields the blade against heat, gumming and corrosion. Blade diameter in. 10, blade speed RPM 7, 000, Arbor Knockout No, Arbor size in. 5/8, teeth Qty. 80, tip type carbide, blades Qty. 1, corrosion resistant Yes, engineered venting Yes, tooth grind TCG, anti stick rim Yes, blade use nonferrous metal, plastic, laminate. 10in. X 80T Circular saw blade for cutting nonferrous metals copper pipe, aluminum, brass and plastics and laminates thin kerf blade with triple chip grind TCG tooth design for long life and clean, burr-free finish carbide tips feature tri-metal shock-resistant brazing to withstand extreme impact for extra durability Perm-Shield nonstick coating shields the blade against heat, gumming and corrosion

For a high-impact blade that makes clean cuts in plastics and non-ferrous metals, look no further than the Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade. Thanks to its proprietary TCG (triple-chip grind) teeth, this is your go-to blade for slicing through plastic structures and non-ferrous metals such as copper pipes, aluminum extrusions, and brass plates.

Model # D1080N Diameter 10" Machine Use Miter/Slide Miter Saw, Table Saw Application Non-Ferrous Metals/Plastics Teeth 80 TCG (Triple-Chip Grind) Arbor 5/8" Kerf .094" Hook Angle -5°

Makes Clean, Razor-Sharp Cuts in Plastic and Non-Ferrous Metals

Achieving premium results when working with plastics and non-ferrous metals is all about clean, accurate cuts. The Freud D1080N makes this process easy, fast, and precise. Constructed for making flawless crosscuts, this blade's proprietary TCG (triple-chip grind) teeth leave a clean, burr-free finish.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for slicing through plastic structures and non-ferrous metal pipes, extrusions, and plates. Appropriate application materials include copper, aluminum, brass, and plastic.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1080N's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.094-inch kerf between the blade's 80 TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1080N is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1080N is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This blade is ideal for on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate, etc.

• Laser Cut Stabilizer Vents Trap Noise And Vibration Keeping It Cool And Reducing Blade Warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
• Durable micro grain titanium carbide for extreme durability, razor-sharp cuts, and long life
• Package height:14.0"

User questions & answers

Question:	Will this blade cut 1/2" hdpe well
Answer:	Absolutely NOT. It's the complete opposite of that kind of blade. The teeth are like mini-razor blades that slightly criss-cross each other. You're looking for the opposite- a blade that has flat, chisel-like scooping teeth. Totally opposite.
Question:	Will this blade cut a flat bottom dado in wood
Answer:	I have not tried 1/4 aluminum but have cut plenty of 1/8 aluminum sheet and angle extrusions and I would have no problem using it for 1/4 inch material. This blade works well with aluminum sheets
Question:	Has anyone used this to cut 1/4" 3003 aluminum plate with success
Answer:	Look on the amazon site, part way down page on left. If by "1/8 thick" you mean the width of the removed material (called the "kerf") the kerf is 0.094"...so not 1/8"...thinner.By the way, I love the blade for cutting aluminum plate and extrusions (as well as the occasional plastic...and even wood if I am too lazy to change to a wood blade.
Question:	what is the thickness of the blade? I am looking for one that is 1/8" thick
Answer:	Thank you so much for your interest in SPEEDYORDERS "Two Way Acrylic Mirror". Yes, you can use "double-sided mirror adhesive tape". Make sure the surface is free from dust, dirt and grease before using the tape. It comes with protective masking which should not be removed until mirror is installed. Thanks for your inquiry. Please contact us directly for more information. We look forward to doing business with you.

Product description

The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no need for stabilizers.

The 10-inch Freud LU83R010 Thin Kerf Combination Saw Blade offers a configuration that pairs flat teeth and alternating-top-bevel teeth to ensure strong performance both when ripping and when crosscutting. Also offering TiCo high-density carbide tips, laser-cut, anti-vibration slots that eliminate the need for stabilizers, and Freud's insulating, Perma-SHIELD coating, this multi-purpose blade is built for lasting convenience.

LU83R010 Thin Kerf Combination Saw Blade At a Glance: Ideal for crosscutting materials 3/4 to 3-1/2 inches thick, and ripping materials 3/8 to 1-1/2 inches thick Heavy-duty plate with laser-cut, anti-vibration slots Tough Perma-Shield coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 10" Teeth 50 COMB Arbor 5/8" Kerf (K) .091 Plate (P) .071

Thin Kerf requires less power and allows for faster feed rate Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life, and giving a crisp, flawless finish

Combination Tooth Design for Versatility and Accuracy

This thin-kerf blade's 50 teeth are arranged in groups of five, each of which includes one flat-top raker tooth for fast, accurate ripping. Each flat tooth is followed by four alternating-top-bevel (ATB) teeth that are particularly well suited to crosscutting, and large gullets between the teeth ensure effective chip clearance.

This blade is designed for optimal performance when crosscutting materials that are 3/4 to 3-1/2 inches thick, or ripping materials that are 3/8 to 1-1/2 inches thick. It makes quick work of hard- and softwood, plywood, and chipboard. It can also handle laminates or tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a .091 kerf.

And because thin-kerf blades remove less material than standard carbide blades, they allow for faster feed times, and they require less horsepower to produce smooth, accurate results when cutting.

Well-Balanced, Anti-Vibration Design

This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade.

High-Density Carbide for Maximum Cutting Performance

This thin-kerf saw blade's 50 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "combination blend." Formulated to help the blade maintain a sharp cutting edge for longer when faced with a variety of applications, this blend includes just a little bit more high-density tungsten carbide than other TiCo blends. And it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup

Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing

An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box

Freud LU83R010 Thin Kerf Combination Saw Blade--10-inch diameter, 5/8-inch arbor, 50-tooth COMBO design.

From the Manufacturer

Freud's 10" Combination Blade Features a 50-tooth configuration designed for ripping or crosscutting through a variety of materials. Anti-Vibration Reeds eliminate vibration for clean, fast cuts. A Perma-SHIELD coating keeps the blade running cool and reduces pitch build up. Micro-Grain Carbide ensures superior cutting and maximum blade life. A thin kerf design enhances the performance and extends the life of saws under 3HP.

FEATURES

• Combination tooth design for ripping or crosscutting
• Anti-Vibration Reeds for reduced vibration
• Perma-SHIELD coating for a cool blade and reduce pitch build up
• Micro Grain Carbide for superior cutting performance and extended blade life
• Thin kerf design for enhanced performance in saws under 3HP

SPECIFICATIONS

• Blade style: thin kerf
• Blade size: 10"
• Tooth count: 50

• 10" Blade Diameter, 50 Teeth, COMB Grind, 5/8" Arbor, .091" Kerf, 10° Hook Angle
• Premium TiCo HI-Density Carbide Combination Blend for Maximum Performance
• Thin Kerf requires less power and allows for faster feed rate
• Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
• Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

User questions & answers

Question:	Why is the mini cross cut thickness only 3/4 inch and rip cut
Answer:	Yes. This is a outdoor rated decal. It can withstand tentative and moisture.
Question:	I have a skil table saw with a 10" blade 5/8 can I use This blade to replace old blade
Answer:	The sticker it’s self is 4”x31/2”. The decal is what you see no other sticky background.
Question:	How does this blade compare to the freud d1050x? they look the same but there is a difference in price. can anybody tell me the difference
Answer:	Yes, you can place it on a window, or any other hard, clean surface.
Question:	Any thoughts on using this blade on a radial arm saw
Answer:	Yes, as long as it is applied to a smooth, clean, and dry surface.

Product description

Diablo finish 8 1/4in. , 40 tooth Circular saw blades are ideal for smooth finish crosscuts in hardwood, softwood or plywood. They are a perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. A great choice for jobsite finish cuts in 1x, decking, fencing, fascia and plywood. Blade diameter in. 8 - 8 1/4, blade speed RPM 9, 000, Arbor Knockout Yes, Arbor size in. 5/8, teeth Qty. 40, tip type carbide, tooth grind ATB, blades Qty. 1, corrosion resistant Yes, engineered venting Yes, blade use finish. Tico Hi-Density carbide is specifically designed for each application to improve performance Perma-Shield nonstick coating shields the blade against heat, gumming and corrosion super-thin laser cut kerf for fast, durable and clean cuts tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body for a longer life and sharper cutting edge laser-cut Stabilizer vents trap noise and vibration and stabilizes the blade laser-cut heat expansion slots allow blade to expand due to heat build-up, keeping the cut true and straight

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade leaves a smooth finish when ripping and crosscutting 1x stock, decking, fencing, and plywood. This is the ideal plywood blade for your circular saw.

• The product is 8x40T Diablo Blade
• Easy to use
• The product is manufactured in Italy
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
• Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
• Laser cut arbor for accurate blade rotation reducing vibration and premature wear

User questions & answers

Question:	Powermatic panel saw? Mine says 8" only but description says 8 and 8 1/4 depending on where you read
Answer:	Die cut decal
Question:	Diablo blade by freud? i other diablo blades by diablo, what's the difference
Answer:	Sticker
Question:	Can i knock out the arbor to make it a diamond arbor for a skilsaw spt78w-01 15-amp 8-1/4-inch aluminum worm drive circular saw
Answer:	Yes i put them on a hardhat
Question:	Is this good for a cordless table saw? Cant find kerf width anywhere not sure what to get
Answer:	I'm not sure why it is in the title. The decal is as shown.

Product description

Diablo new ultra thin kerf combination saw blade. The ATB grind + raker tooth design allows for straighter rips and improved performance. The deep Gullet design allows for cutting thicker stock while maximizing number of teeth. Blade features Freud's TiCo Hi-Density carbide for extreme durability and cutting life up to 4 times longer than standard carbide, Perma-Shield coating for less drag, gumming and corrosion, laser cut Stabilizer vents for less vibration and quieter cleaner cuts, tri-metal shock resistant brazing to withstand extreme impact and you have a saw blade that "cuts like a hot knife through butter". 12-Inch diameter, 60T ATB/r, and 1-inch arbor.

• The ATB Grind + Rakes tooth Design Allows For Straighter Rips And Improved Performance
• Freud's Tic Hi-Density Carbide For Extreme Durability And Cutting Life Up to 4 Times Longer Than Standard Carbide
• Cuts Like A Hot Knife Through Butter
• Parma-Shield Coating For Less Drag, Gumming And Corrosion

User questions & answers

Question:	does this blade remove
Answer:	I get very little to next to nothing tearout with various species of wood but this is in conjunction with a home made zero clearance insert on my DeWalt DWS780 compound saw. I do a lot of crosscutting and this combination works really well for me. I have pretty much standardized on using Freud blades for my tables saws and track saw etc, the main thing is to find a good sharpening service to keep them performing well.
Question:	Hole diameter
Answer:	The official answer to the kerf width for this Diablo D1280x blade is .118”, slightly wider than 3/32. It has a 15 degree forward tooth angle and is a full 12” in diameter. I carefully compared this blade to the Freud Industrial equivalent which is 11 3/4 in diameter, 15 degree tooth angle and a slightly narrower kerf at .094”.
Question:	Does it cut alluminum
Answer:	This blade will cut laminate but it is not made for it.
Question:	is this good for miter angle cuts
Answer:	YesI use on a slide miter saw as well as a fixed miter boxGood blades been using for years