11 best diablo miter saws

Product description

High-performance Diablo steel Demon Circular saw blade with TiCo titanium Cobalt high-density carbide is specifically designed for cutting nonferrous metals such as copper pipe, aluminum and brass, plus plastics and laminates. Thin kerf blade features a triple chip grind tooth design for long life and a clean, burr-free finish. Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability. Perm-shield nonstick coating shields the blade against heat, gumming and corrosion. Blade diameter in. 10, blade speed RPM 7, 000, Arbor Knockout No, Arbor size in. 5/8, teeth Qty. 80, tip type carbide, blades Qty. 1, corrosion resistant Yes, engineered venting Yes, tooth grind TCG, anti stick rim Yes, blade use nonferrous metal, plastic, laminate. 10in. X 80T Circular saw blade for cutting nonferrous metals copper pipe, aluminum, brass and plastics and laminates thin kerf blade with triple chip grind TCG tooth design for long life and clean, burr-free finish carbide tips feature tri-metal shock-resistant brazing to withstand extreme impact for extra durability Perm-Shield nonstick coating shields the blade against heat, gumming and corrosion

For a high-impact blade that makes clean cuts in plastics and non-ferrous metals, look no further than the Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade. Thanks to its proprietary TCG (triple-chip grind) teeth, this is your go-to blade for slicing through plastic structures and non-ferrous metals such as copper pipes, aluminum extrusions, and brass plates.

Model # D1080N Diameter 10" Machine Use Miter/Slide Miter Saw, Table Saw Application Non-Ferrous Metals/Plastics Teeth 80 TCG (Triple-Chip Grind) Arbor 5/8" Kerf .094" Hook Angle -5°

Makes Clean, Razor-Sharp Cuts in Plastic and Non-Ferrous Metals

Achieving premium results when working with plastics and non-ferrous metals is all about clean, accurate cuts. The Freud D1080N makes this process easy, fast, and precise. Constructed for making flawless crosscuts, this blade's proprietary TCG (triple-chip grind) teeth leave a clean, burr-free finish.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for slicing through plastic structures and non-ferrous metal pipes, extrusions, and plates. Appropriate application materials include copper, aluminum, brass, and plastic.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1080N's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.094-inch kerf between the blade's 80 TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1080N is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1080N is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1080N Diablo 10-Inch Non-Ferrous Metals and Plastics Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This blade is ideal for on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate, etc.

• Laser Cut Stabilizer Vents Trap Noise And Vibration Keeping It Cool And Reducing Blade Warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
• Durable micro grain titanium carbide for extreme durability, razor-sharp cuts, and long life
• Package height:14.0"

User questions & answers

Question:	Will this blade cut 1/2" hdpe well
Answer:	Absolutely NOT. It's the complete opposite of that kind of blade. The teeth are like mini-razor blades that slightly criss-cross each other. You're looking for the opposite- a blade that has flat, chisel-like scooping teeth. Totally opposite.
Question:	Will this blade cut a flat bottom dado in wood
Answer:	I have not tried 1/4 aluminum but have cut plenty of 1/8 aluminum sheet and angle extrusions and I would have no problem using it for 1/4 inch material. This blade works well with aluminum sheets
Question:	Has anyone used this to cut 1/4" 3003 aluminum plate with success
Answer:	Look on the amazon site, part way down page on left. If by "1/8 thick" you mean the width of the removed material (called the "kerf") the kerf is 0.094"...so not 1/8"...thinner.By the way, I love the blade for cutting aluminum plate and extrusions (as well as the occasional plastic...and even wood if I am too lazy to change to a wood blade.
Question:	what is the thickness of the blade? I am looking for one that is 1/8" thick
Answer:	Thank you so much for your interest in SPEEDYORDERS "Two Way Acrylic Mirror". Yes, you can use "double-sided mirror adhesive tape". Make sure the surface is free from dust, dirt and grease before using the tape. It comes with protective masking which should not be removed until mirror is installed. Thanks for your inquiry. Please contact us directly for more information. We look forward to doing business with you.

Product description

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This Advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-Shield coating keeps this blade free from gumming and corrosion, and laser-cut Stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life.

For a highly versatile blade that makes clean cuts in a broad variety of wood types, look no further than the Freud D1244X Diablo 12-Inch General Purpose Saw Blade. This is your go-to blade for slicing through oak, pine, plywood, pressure-treated lumber, and beams. Ideal for a wide variety of applications, this blade reduces the need to change blades between tasks. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips.

Makes Clean Cuts in a Wide Variety of Wood

Achieving premium results when performing any kind of woodworking is all about clean, accurate cuts. The Freud D1244X makes this process easy, fast, and precise. An added time-saving feature, its general-purpose versatility will let you employ it job after job. This blade is even suited to making rip cuts, often achieving a smoother finish than dedicated ripping blades.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for varying jobs that call for making rips and crosscuts in both hardwoods and softwoods. Appropriate application materials include oak, pine, plywood, pressure-treated lumber, and beams.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1244X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 40 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1244X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter Saws

The Freud D1244X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1244X Diablo 12-Inch General Purpose Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the best choice for your miter saw as it leaves a smooth cut in a variety of applications. Ideal for cutting oak, pine, plywood, pressure treated lumber, and beams.

• The product is 12x44T Diablo Blade
• Easy to use
• The product is manufactured in Italy
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life, Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability, Laser cut arbor for accurate blade rotation reducing vibration and premature wear, Imported

User questions & answers

Question:	Is this blade only for miter saws or could it be used with a table saw
Answer:	The blade pictured is the LU85R010 - 10" x 80t- The LU85R012 is 12" x 96t
Question:	Does freud make a 5/8 in arbor 12in blade? i just bought a craftsman vintage table saw and want to replace the blade. mfg
Answer:	Try MACH-B-ABRASIVES in MN Phone:800-533-8010
Question:	Could this be used for finish work
Answer:	If you mean re-sharpened then Yes. I own several Freud LU series blades and they can be re-sharpened many times.
Question:	Has anyone tried cutting aluminum rails and/or pvc pipe with this blade? i intend to use 99% cuts on wood with 1% occasional aluminu/pvc
Answer:	Yes it should

Product description

The Diablo 12in. 80 Tooth Fine Finish Circular Saw Blade is a high-performance blade designed for fine crosscuts in hardwoods and softwoods. Provides chip-free cuts in veneered plywood, melamine and MDF and cabinets and furniture work. Special cutting geometry and high tooth count produce extremely smooth cuts while minimizing grabbing or blowout. Provides flawless crosscuts in wood with minimal rework. Features a super-thin laser cut kerf, Perma-SHIELD nonstick coating, laser-cut stabilizer vents, tri-metal shock-resistant brazing and more. For use on sliding or chop-style miter saws and table saws. Blade Diameter in. 12, Blade Speed RPM 6,000, Anti Stick Rim Yes, Arbor Knockout No, Arbor Size in. 1, Teeth qty. 80, Tip Type Carbide, Blades qty. 1, Corrosion Resistant Yes, Engineered Venting Yes, Tooth Grind ATB, Blade Use Hardwood, softwood. Super-thin laser cut kerf for fast, durable and clean cuts TiCo hi-density carbide provides a controlled carbide wear that stays sharper longer Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion Laser-cut stabilizer vents trap noise and vibration and stabilizes the blade Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Laser-cut heat expansion slots allow blade to expand due to heat build-up, keeping the cut true and straight Hardened steel body for longer life and a sharper cutting edge

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. Features Freud's TicoHi-Density Carbide , a Perma-Shield coating keeps this blade free from gumming and corrosion, Laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life, and tri-metal brazing. This particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.12" diameter, 80t ATB, 1" arbor, 7 Degree hook angle.

• The product is 12x80T Diablo Blade
• Easy to use
• The product is manufactured in Italy
• Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
• Super thin laser cut kerf gives extremely fast, durable, and clean cuts
• Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
• Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
• Tri-Metal Brazing for impact-resistant tips

User questions & answers

Question:	How is tearout on hardwoods like mahogany or maple
Answer:	Yes. Wiring is extra long to allow for this option.
Question:	What is the kerf one place amozon says it is .2 thick I am thinking this is the packing another place says .118 others say some blades are
Answer:	Nope
Question:	can it be used on laminate floors
Answer:	Simulated wood on one side and silver/light grey on the other to match the chrome base
Question:	Can this blade be used on 12" Radial Arm Saw
Answer:	13"

Product description

12 X 96 NON FERROUS/PLASTIC

For a high-impact blade that makes clean cuts in plastics and non-ferrous metals, look no further than the Freud D1296N Diablo 12-Inch Non-Ferrous Metals and Plastics Saw Blade. Thanks to its proprietary TCG (triple-chip grind) teeth, this is your go-to blade for slicing through plastic structures and non-ferrous metals such as copper pipes, aluminum extrusions, and brass plates.

Model # D1296N Diameter 12" Machine Use Miter & Slide Miter Saw Application Non-Ferrous Metals/Plastics Teeth 96 TCG (Triple-Chip Grind) Arbor 1" Kerf .091" Hook Angle -5°

Makes Clean, Razor-Sharp Cuts in Plastic and Non-Ferrous Metals

Achieving premium results when working with plastics and non-ferrous metals is all about clean, accurate cuts. The Freud D1296N makes this process easy, fast, and precise. Constructed for making flawless crosscuts, this blade's proprietary TCG (triple-chip grind) teeth leave a clean, burr-free finish.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for slicing through plastic structures and non-ferrous metal pipes, extrusions, and plates. Appropriate application materials include copper, aluminum, brass, and plastic.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1296N's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.091-inch kerf between the blade's 96 TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1296N is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter Saws

The Freud D1296N is a great addition to your workshop because it's designed with the versatility to fit a variety of miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1296N Diablo 12-Inch Non-Ferrous Metals and Plastics Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This blade is ideal for on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate, etc.

• The product is 12x96T Diablo Blade
• Easy to use
• The product is manufactured in Italy
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life, Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability, Laser cut arbor for accurate blade rotation reducing vibration and premature wear, Imported

User questions & answers

Question:	Want to use this blade to cut 2" thick brass, Will this worl
Answer:	This is listed as used on slide saws, though it has a +10 degree kerf. I use this on my slide saw and works fine. Not as good as a forrest chopmaster but a thinner kerf, which is supposed to be easier on your saw. This blade does leave some burn marks mitering hard woods.
Question:	Looking for an easy, fast, clean means of cutting aluminum window screen frames would this be the best option
Answer:	With the carbide inserts on each tooth, it will cut aluminum so plastic should be a snap.
Question:	Can these cut iron , steel , and stainless steel
Answer:	I would avoid this blade for anything other than wood. I recommend the LU84R011. It's a combination blade that I use on my table saw for a myriad of things and I get super smooth cuts from it without excessive heat and paint transfer.
Question:	I need to confirm this item is for non ferrous metal..the item pictured is not, it doen't match the description...please confirm. Thank you
Answer:	Hook Angle is a positive 5-Degrees. Freud designed the LU74R010 Industrial Thin Kerf Crosscut blade as a 80 tooth 10" fine crosscut blade that features 80 alternating top bevel teeth set at a 5 degree positive hook angle, which is a configuration that lends itself to very clean crosscuts in a variety of materials, and is condusive for use in a table saw, radial arm saw, compound miter saw, or sliding compound miter saw. The body uses a laser cut expansion slots for low noise and vibration, and has an "Permashield" non-stick coating said to reduce heat build up. The C4 carbide teeth large enough to withstand many resharpendings.

Product description

10 X 80 ULTRA FINISH

For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Makes Clean, Chip-Free Cuts in Delicate Finish Work

Achieving premium results when creating finish crosscuts in ultra-fine materials is all about clean, accurate cuts. The Freud D1080X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.

Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making ultra-fine finish crosscuts in delicate pieces. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1080X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 80 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1080X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1080X is a great addition to your workshop because it's designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.

• The product is 10x80T Diablo Blade
• Easy to use
• The product is manufactured in China
• 10-inch 80T ultra fine finish cut-off blade with a laser-cut 5/8-inch arbor
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp, Imported

User questions & answers

Question:	what is the hook angle on this blade
Answer:	Clean windows then use water to apply. Should come off plastic.
Question:	How are cuts with this blade on base boards and trim? Don't have answer if you haven't done so
Answer:	You can not. Once you put this on something it has adhesive on it so you will only be able to use it once.
Question:	Will this blade fit my crafstman table saw
Answer:	White
Question:	I bought this blade and wasn't sure if it only does crosscuts or is it designed to rip also? I know it has more teeth so I take it will go slower
Answer:	It is not intended to stick to fabric, only clean, hard surfaces.

Product features

Freud D1080X Diablo 10" 80-tooth ATB Saw Blade w/5/8" Arbor&PermaShield Coating

Ultra Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Flawless crosscuts in wood with minimal rework. Flawless finish in melamine & veneered plywood.

• TiCo Hi-Density carbide specifically designed for each application to increase performance
• Perma-SHIELD Non-stick Coating protects from heat, gumming, & corrosion
• Super thin laser cut kerf for fast, durable, and clean cuts
• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
• Hardened Steel Body – provides a longer life and sharper cutting edge.

Product description

"The Diablo 10in. 50 Tooth Combination Circular Saw Blade is ideal for ripping and crosscutting wood and wood composites, while leaving a smooth finish. This blade is the best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo's large gullet provides the chip removal space required while ripping, and the close grouping of teeth with the set provides the smaller bit size required when crosscutting. Features a super-thin laser cut kerf, Perma-SHIELD nonstick coating, tri-metal shock-resistant brazing and more. For use on miter saws and table saws. Arbor Knockout No, Arbor Size in. 5/8, Corrosion Resistant Yes, Teeth qty. 50, Blade Diameter in. 10, Blade Speed RPM 7,000, Blades qty. 1, Tip Type Carbide, Tooth Grind Combination, Anti Stick Rim Yes, Blade Use Wood, wood composite. Super-thin laser cut kerf for fast, durable and clean cuts TiCo hi-density carbide provides a controlled carbide wear that stays sharper longer Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body for longer life and a sharper cutting edge For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips. Model # D1050X Diameter 10" Machine Use Miter Saw, Table Saw Application Combination Teeth 50 ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15 Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time. The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping. Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF). Produces Smooth, Quiet Cuts with Laser-Cut Kerf The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time. An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life. Features Shock-Resistant Carbide for Long-Lasting Precision So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion. Fits Miter and Table Saws The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws. This product is covered by Freud's Limited Lifetime Warranty. What's in the Box Freud D1050X Diablo 10-Inch Combination Saw Blade. "

For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips.

Model # D1050X Diameter 10" Machine Use Miter Saw, Table Saw Application Combination Teeth 50 ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15°

Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites

Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time.

The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF).

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1050X Diablo 10-Inch Combination Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the best choice for a table saw when one blade is needed for ripping and crosscutting.

• The product is 10x50T Diablo Blade
• Easy to use
• The product is manufactured in China
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Imported

User questions & answers

Question:	Are these really made in China
Answer:	From what I have read, the Diablo series is made in Italy but who knows what really goes on these days? I am happy with the blade and at the price it is a good value. Could they have been made in Italy at one time and then sourced/made in another country later on? I can't say.
Question:	Why are the vents just printed on
Answer:	The vents are actually through-cut, then filled with a rubbery material. They really do work. These blades are far quieter than the stock blades that come on most saws.
Question:	Would you recommend this blade for ripping finished hardwood? I am looking for a good blade for ripping cabinet fillers, etc
Answer:	It depends on what the cabinets are made out of. If they're solid wood, yes absolutely this blade will do great, it leaves almost sanded smooth edges if your saw is setup right. If its plywood, or particle board, or mdf, I'd use a diablo blade meant for that kind of wood like the freud d1090x 90 tooth blade, that will leave sanded smooth edges on a plywood board, and wont tear up your veneer like the 50 tooth blade might.
Question:	Would this blade cut a flat bottom dado
Answer:	No - The better version, if you want to make smooth multiple passes for a dado is the more expensive, Freud LU84R011 which has a flat bottom edge on the first tooth after each gullet.

Product description

Diablo new ultra thin kerf combination saw blade. The ATB grind + raker tooth design allows for straighter rips and improved performance. The deep Gullet design allows for cutting thicker stock while maximizing number of teeth. Blade features Freud's TiCo Hi-Density carbide for extreme durability and cutting life up to 4 times longer than standard carbide, Perma-Shield coating for less drag, gumming and corrosion, laser cut Stabilizer vents for less vibration and quieter cleaner cuts, tri-metal shock resistant brazing to withstand extreme impact and you have a saw blade that "cuts like a hot knife through butter". 12-Inch diameter, 60T ATB/r, and 1-inch arbor.

• The ATB Grind + Rakes tooth Design Allows For Straighter Rips And Improved Performance
• Freud's Tic Hi-Density Carbide For Extreme Durability And Cutting Life Up to 4 Times Longer Than Standard Carbide
• Cuts Like A Hot Knife Through Butter
• Parma-Shield Coating For Less Drag, Gumming And Corrosion

User questions & answers

Question:	does this blade remove
Answer:	I get very little to next to nothing tearout with various species of wood but this is in conjunction with a home made zero clearance insert on my DeWalt DWS780 compound saw. I do a lot of crosscutting and this combination works really well for me. I have pretty much standardized on using Freud blades for my tables saws and track saw etc, the main thing is to find a good sharpening service to keep them performing well.
Question:	Hole diameter
Answer:	The official answer to the kerf width for this Diablo D1280x blade is .118”, slightly wider than 3/32. It has a 15 degree forward tooth angle and is a full 12” in diameter. I carefully compared this blade to the Freud Industrial equivalent which is 11 3/4 in diameter, 15 degree tooth angle and a slightly narrower kerf at .094”.
Question:	Does it cut alluminum
Answer:	This blade will cut laminate but it is not made for it.
Question:	is this good for miter angle cuts
Answer:	YesI use on a slide miter saw as well as a fixed miter boxGood blades been using for years

Product description

The only approved James Hardie Polycrystalline diamond ( PCD ) Tipped fiber cement saw blade. Developed by James hardy and Freud Diablo for all James Hardie fiber cement products and other fiber cement brand products. The PCD triple chip design offers up to 60 times longer cutting life than standard carbide blades. The laser cut thin kerf design gives fast and precise cuts with less dust and waste.

For a heavy-duty blade that powers through fiber cement with clean, low-dust crosscuts, look no further than the Freud D1208DH Diablo 12-Inch Fiber Cement Saw Blade. Featuring proprietary James Hardie polycrystalline diamond (PCD) tipped construction, this blade generates minimal dust, easily handles full-time use, and offers an extended cutting life.

Model # D1208DH Diameter 12" Machine Use Miter Saw Application Fiber Cement Teeth 8 TCG (Triple-Chip Grind) Arbor 1" Kerf .087" Hook Angle 10°

Makes Clean Cuts in Fiber Cement with Minimal Dust

Achieving premium results when working with fiber cement products is all about clean, accurate cuts. The Freud D1208DH makes this process easy, fast, and precise. Additionally, cuts made by this blade generate up to 50 percent less reparable dust, so your work environment is cleaner and healthier.

Contractors, construction workers, and avid do-it-yourself remodelers will want to keep this blade on hand for jobs that call for making cuts in fiber cement products such as paneling, siding, and backer-board.

Offers Maximum Life with PCD-Tipped Design

Expertly developed by James Hardie and Freud Diablo for tackling a variety of fiber cement products, the Freud D1208DH features a proprietary PCD (polycrystalline diamond) tipped design. This blade also boasts spark-eroded TCG (triple-chip grind) teeth, constructed to stand up to dense composites, along with a Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Together, these features give the blade a cutting life that lasts up to 60 percent longer than standard carbide blades.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1208DH's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.087-inch kerf between the blade's eight TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Fits Miter Saws

The Freud D1208DH is a great addition to your workshop because it's designed with the versatility to fit a variety of miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1208DH Diablo 12-Inch Fiber Cement Saw Blade.

From the Manufacturer

The only approved James Hardie Polycrystalline diamond ( PCD ) tipped fiber cement saw blade. Developed by James Hardi and Freud Diablo for all James Hardie fiber cement products and other fiber cement brand products. The PCD triple chip design offers up to 60 times longer cutting life than standard carbide blades.The laser cut thin kerf design gives fast and precise cuts with less dust and waste. Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat. 12 inch by 8 tooth PCD triple chip tooth with 1-inch arbor.

• Freud's limited lifetime
• 12X8 PCD FIBER CEMENT BLADE
• The PCD triple chip design offers up to 60 times longer cutting life than standard carbide blades
• Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Parma-Shield coating to reduce heat

User questions & answers

Question:	How many for this price? Homedepot sells them for $29 each, that is why I am asking
Answer:	That's for a 7 inch blade. The $100plus is for a 12 inch blade. There's only 1 blade, but no place sells it that's size for cheaper. It's great for a chop saw cutting 8.25 in hardie siding
Question:	Has anyone used this blade in a table saw to rip hardie siding
Answer:	I bought a10” diablo blade for my table saw but I haven’t used it yet. Sorry I couldn’t help you out. I do love the 7 1/4 “ for my skill saw, Jerry
Question:	Would this blade work for bamboo laminate flooring
Answer:	No. This blade was made for cement board siding ( Hardie ). Try Diablo D1216LF
Question:	will this fit a standard circular saw
Answer:	Well, "circular saw" usually means a portable saw, like a skill saw. A 12" blade is usually too big for most such. (I do have a Makita portable that takes something like a 16" blade, but those are less common and I wouldn't call it a "standard". This blade is meant for primarily miter saws, or "chop saws". They DO make basically the same blade in a smaller version, 7" or so for "standard portable circular saws. this blade is made for cutting cementitious materials like hardie board. This works pretty well, but I try to use a shear as much as possible to try to minimize airborne dust.

Product description

10 X 50 X 1 FERROUS CERMET CSB

• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB
• 10 X 50 X 1 FERROUS CERMET CSB

User questions & answers

Question:	What is the required rotational speed for the 10" steel demon
Answer:	I've cut 0.125" wall 1.5" steel tubing. Works pretty well but won't last for more than about 15 cuts in this rather strong steel. My band saw is better but I always keep one of these blades on hand for precision cuts. On thinner metal, like butter.
Question:	So confusing max rpm is 5800 or 1800 ? why I saw it in my local homedepot it says 5800 rpm on its package
Answer:	That is the limit of its abilities. The key is to set your saw depth deep, so each tooth is in contact with the steel very briefly. If you set the blade shallow, as if you were cutting 1/4" plywood, you will overheat the teeth and be lucky to cut 12" before the blade is destroyed.
Question:	I want to ask if this blade will work with evolution mitre saw
Answer:	Lol....I operate On or Off...I prefer the full ON position to get the job done and move on!!
Question:	Was gonna try this on my hitachi compound miter saw. It is 5,000 rpm has anyone used this blade running at this rate
Answer:	12 Pt., SAE Wrenches: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4"

Product description

8-1/2 X 60 X 5/8 SLIDE

The Freud Difference

Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud Saw Blades

A world leader in cutting tool technology, Freud has earned a reputation for quality woodworking tools and accessories. With several unique design features, Freud saw blades are among the longest lasting and best performing blades in the industry. Choose from a variety of blade designs, sizes and coatings to select the best blade to suit your project.

About this Miter Saw Blade

The Diablo 8-1/2-inch 60-tooth slide compound miter saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser-cut blade features a thin kerf, making it ideal for portable and low-powered saws on the jobsite. A permanent Perma-Shield coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the perfect choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. This Diablo saw blade has a 5/8-inch arbor with a fine finish, excellent for crosscutting oak, pine, melamine, plywood, and molding.

Warranty

This product is covered by Freud's limited lifetime warranty.

From the Manufacturer

The ideal choice for trim carpenters. This fine finishing blade leaves a smooth surface that requires little to no sanding. Blade features Freud's TicoHi-Density Carbide, Perma- Shield Coating, Laser-cut stabilizer vents, Super thin laser-cut kerf, and Tri-metal brazing. Ideal for crosscutting oak, pine, melamine, plywood and moulding. 8-1/2" diameter x 60 tooth ATB with 5/8" arbor.

• The product is 8-1/2x60T Diablo Blade
• Easy to use
• The product is manufactured in Italy
• Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
• Super thin laser cut kerf gives extremely fast, durable, and clean cuts
• Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
• Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
• Tri-Metal Brazing for impact-resistant tips

User questions & answers

Question:	This blade is used to cut aluminum
Answer:	This blade is for cutting wood
Question:	I have 8 1/4" blade now. Can I use 8 1/2" blade to replace it
Answer:	If you're running an 8 1/4" blade in your 8 1/2" saw, yes... If the saw itself is less than 8 1/2", then positively not!
Question:	why is there a dimond knock out around the arbor hole
Answer:	Some saw arbors use a diamond-shape to prevent blade slippage on the arbor. However, most saws I have seen use the 5/8" circular arbor. The knockout is there so you can use the blade on a saw that has the diamond-shaped arbor.
Question:	What is the hook on this 8 1/2" blade? Thanks
Answer:	Hook angle is 7 degrees.

Product description

Diablo's general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. Great for both sliding and “chop” style miter saws as well as table saws.

• TiCo Hi-Density carbide specifically designed for each application to increase performance
• Perma-SHIELD Non-stick Coating protects from heat, gumming, & corrosion
• Super thin laser cut kerf for fast, durable, and clean cuts
• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
• Hardened Steel Body warrants a longer life and sharper cutting edge.