13 best concord blades table saws

Product description

This industrial standard aluminum cutting carbide saw blade has construction grade titanium carbide teeth that allow you to easily cut through aluminum and non-ferrous metals such as copper, brass, bronze, etc. Can be used to cut other difficult materials such as plastic, PVC tubing and fiberglass. The negative hook angle, triple-chip grind and thick plate combine to produce a superior finish.

• TCG grind
• 3.2mm kerf
• -5 degree hook angle
• 5/8" arbor

• TCG Grind: Triple Chip Grind allows for smooth cut on non ferrous and plastic items
• Ultra sharp, hard titanium carbide
• Ideal for cutting non ferrous metals such as Aluminum, Brass, copper, bronze and more as well as plastics, plexiglass, PVC, Acrylics & Fiberglass
• Equipment use with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, etc.
• 3.2 mm kerf design, TCG Grind & -5Degree hook

User questions & answers

Question:	Does this blade have a diamond knockout
Answer:	It will chip the carbide in a hurry. Just used it this week and went through a blade in my miter and table saw. Buy the cheapest blade you can find for the project.
Question:	Will this cut laminate flooring
Answer:	The blade is 10" wide x 1/8" thick on a 5/8 bore hole
Question:	I need to cut aluminum gutters and other thin aluminum parts for a patio cover. Will this give me a clean edge without bending the parts
Answer:	Yes it will cut them. I had this On a radial arm saw for almost that exact purpose and it did fine.
Question:	Has anyone used this blade to cut vinyl siding succesfully? (tried to look thru all the previous questiions and i hope i am not repreating
Answer:	will burn and melt but will cut

Product description

Remember when you had a smooth cut with no tearout? The WEN 10-Inch Professional Fine-Finish Woodworking Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through woods of any kind, making easy work out of pine, oak, poplar, cherry, maple, walnut, and more. The 5/8-inch arbor allows for compatibility with the majority of 10-inch miter saws, jobsite saws, and table saws on the market. Heat expansion slots help the blade expand and contract as needed to provide maximum accuracy across a wide range of cutting conditions. Our unique protective coating fights off potential damage caused by heat, rust, corrosion, gumming, resin, and more. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 of an inch wide (2.4 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

• Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
• Perfect for slicing through both hard and softwoods of all kinds
• Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
• Designed with 60 carbide-tipped teeth for fine-finish wood cutting
• Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws

User questions & answers

Question:	Could this be used for a Craftman 10" radial arm saw
Answer:	I don’t see why it wouldn’t

Product description

Ideal for all cutting in softwood, hardwood, chip board, or plywood. Thin kerf for fast and smooth cutting action. Computer balanced plate reduces vibration for improved accuracy and better finish.

The DEWALT DW3106P5 saw blade combination pack contains a 10-inch DW3106 60-tooth fine-finish blade and a DW3103 32-tooth general purpose saw blade. Perfect for miter saw and slide miter saw jobs with softwood, hardwood, chipboard, and plywood, these slim-kerf blades offer quick and even incisions with minimum excess debris. A patent wedge shoulder places additional steel in back of every tip, maximizing strength and precision. Get the cutting action you need at the right price with this heavy-duty combination pack.

• Tougher tungsten carbide stays sharper longer
• Thin kerf for fast and smooth cutting action and The arbor size is 5/8”.
• Computer-balanced plate reduces vibration for improved accuracy and better finish
• Durable tungsten carbide maintains a true edge
• Best used for miter saw and slide miter saw jobs

User questions & answers

Question:	Does is work to cut laminate-flooring
Answer:	Hook Angle: 15 Degrees Teeth: 60 Grind Type: COMB Blade Type: Combination Diameter: 12-in Kerf: 0.118-in Arbor Size: 1-in
Question:	Can this blade be used on a Rigid cordless saw
Answer:	1"
Question:	Can I take this saw blade shaft (razor !) 1 3/16 not
Answer:	I can't speak on this blade in particular. But I run a lot of aluminum soffit/fascia and trim coil around windows and doors. Just about any sliding miter saw blade will cut aluminum just fine if you slide it backwards into the material to make the cut. Same goes for vinyl.
Question:	I need to cut both laminate flooring and wall paneling. will the blades do both and should i cut with the finished side up? signed: a lady woodworker
Answer:	The blade is thin and cuts very well at angles and straight. It is may favorite blade now.

Product description

8-1/4 in. Saw blades are ideal for ripping and cross-cutting applications. Patented body slots reduce vibration, which works with the blade's thin kerf design to deliver exceptional user feel. High-density tungsten carbide teeth are tough, wear-resistant, and provide long life. The reinforced shoulder is designed for strength and durability by providing impact resistance against nail-embedded wood. These blades come with tough coat Anti-stick coating to reduce friction and gumming and are optimized for use on both corded and cordless circular saws. See the chart below for available tooth count options that are right for your application.

• Made from high-density tungsten Carbide for toughness, wear-resistance, and long life
• Tough coat anti-stick coating reduces friction and gumming
• Thin kerf design for smooth cuts
• Reinforced shoulder for impact resistance in nail-embedded wood
• Optimized for use on both corded and cordless circular saws

User questions & answers

Question:	I´m from Uruguay, sorry for my english!, what can i do if my center is not 5/8?, my machine´s center ir 20mm
Answer:	I am not sure what 20MM is- but on most saws if your arbor is not 5/8" the diamond shaped " knock out" around the the 5/8 hole will come out and fit a matching diamond shape raised portion on your saw to lock in the blade. Not sure if that makes sense- if you had a picture of your saw, it could help.
Question:	Is this a flat tooth blade
Answer:	No, it is not a flat tooth blade.
Question:	Is this compatible with the riving knife included with the DWE
Answer:	probably. the riving knife should be the same. they are set up for the saw kerf. your manual should tell you what blades to use
Question:	Does dewalt sell an 8 - 1/4 "fine finishing" blade for the flexvolt 60 volt table saw
Answer:	Sorry I can not help I bought this for a circular saw not a table saw

Product description

Cement carbide teeth offer higher heat resistance and superior hardness; Longer life than standard metal cutting blades; Cuts ferrous metals including stainless steel, steel studs, angle iron, flat bar, channel, emt conduit and threaded rod; Triple chip tooth design extends the life of the blade.

• Cement carbide teeth offer higher heat resistance and superior hardness
• Longer life than standard metal cutting blades
• Cuts ferrous metals including stainless steel, steel studs, angle iron, flat bar, channel, EMT Conduit and threaded rod

User questions & answers

Question:	What is the arbor size
Answer:	Yes it is 0.094" width, = 3/32"
Question:	What is the blades rpm rating at
Answer:	Because the H. D. near me does not stock a 10" 3/32" blade.
Question:	So this is a ten (10) inch (od) around blade, with one inch (id) arbor hole? Y or N
Answer:	Hitachi 10" miter saw is the one I use this blade.

Product description

Fine finish blades let trim crews get the most out of sliding or “chop” style Miter saws, as well as jobsite or workshop Table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, Pine, melamine, plywood, and Moulding. 1" Diameter, 6T ATB, 5/8" Arbor, 15 degree hook angle. Tico Hi-Density carbide specifically designed for each application to increase performance Parma-Shield Non-Stick coating protects from heat, gumming, & corrosion super thin laser cut kerf for fast, durable, and clean cuts tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body – warrants a longer life and sharper cutting edge. Ideal for: high quality crosscuts and rip cuts in wood, plywood & melamine suggested projects: trim, remodeling/demolition

For a clean-cutting blade that creates smooth finish cuts in material such as veneer plywood and delicate hardwood, look no further than the D1060X Diablo 10-Inch Fine-Finish Saw Blade. This is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. This blade's high tooth count minimizes grabbing of the workpiece, producing cuts that require little to no sanding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Makes Clean Finish Cuts in Wood and Delicate Molding

Achieving attractive results when working with fine finish material is all about clean, accurate cuts. The Freud D1060X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.

Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making smooth crosscuts in fine finish work. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1060X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 60 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1060X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1060X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1060X Diablo 10-Inch Fine-Finish Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. Features Freud's TicoHi-Density Carbide , a Perma-Shield coating keeps this blade free from gumming and corrosion, Laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life, and tri-metal brazing. This particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.10" diameter, 60t ATB, 5/8" arbor, 15 Degree hook angle.

• TiCo Hi-Density carbide specifically designed for each application to increase performance
• Perma-SHIELD Non-stick Coating protects from heat, gumming, & corrosion
• Super thin laser cut kerf for fast, durable, and clean cuts
• Made in Italy

User questions & answers

Question:	I just want to one blade for my compound bevel miter saw would you recommend this? Thanks
Answer:	I have no complaints with the D12100x. I’m a trim carpenter and impressed with the blade. I’ve always had either 60 or 80 tooth blades and as long as they were sharp, I really couldn’t tell the difference in cuts.
Question:	Will this cut exotic wood tha tis 4" that is at the top of the Janka scale? Or would it be better to buy a higher tooth count? Thanks
Answer:	I can’t answer about this specific blade, but I have a Forrest table saw blade and it’s really worth the extra money. I use the Freud on my chop saw and am very happy with the performance. I probably wouldn’t go with Forrest for my chop saw unless the price was very close.
Question:	Is this American made
Answer:	The hook angle is 7 degrees. I wanted to know the correct answer and found it from manufacturer's product page: http://www.diablotools.com/products/product/D12100X
Question:	how thin is the actual cut kerf
Answer:	It is the standard 1/8" thickness.

Product description

"The Diablo 10in. 50 Tooth Combination Circular Saw Blade is ideal for ripping and crosscutting wood and wood composites, while leaving a smooth finish. This blade is the best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo's large gullet provides the chip removal space required while ripping, and the close grouping of teeth with the set provides the smaller bit size required when crosscutting. Features a super-thin laser cut kerf, Perma-SHIELD nonstick coating, tri-metal shock-resistant brazing and more. For use on miter saws and table saws. Arbor Knockout No, Arbor Size in. 5/8, Corrosion Resistant Yes, Teeth qty. 50, Blade Diameter in. 10, Blade Speed RPM 7,000, Blades qty. 1, Tip Type Carbide, Tooth Grind Combination, Anti Stick Rim Yes, Blade Use Wood, wood composite. Super-thin laser cut kerf for fast, durable and clean cuts TiCo hi-density carbide provides a controlled carbide wear that stays sharper longer Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body for longer life and a sharper cutting edge For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips. Model # D1050X Diameter 10" Machine Use Miter Saw, Table Saw Application Combination Teeth 50 ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15 Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time. The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping. Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF). Produces Smooth, Quiet Cuts with Laser-Cut Kerf The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time. An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life. Features Shock-Resistant Carbide for Long-Lasting Precision So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion. Fits Miter and Table Saws The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws. This product is covered by Freud's Limited Lifetime Warranty. What's in the Box Freud D1050X Diablo 10-Inch Combination Saw Blade. "

For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips.

Model # D1050X Diameter 10" Machine Use Miter Saw, Table Saw Application Combination Teeth 50 ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15°

Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites

Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time.

The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF).

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1050X Diablo 10-Inch Combination Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the best choice for a table saw when one blade is needed for ripping and crosscutting.

• The product is 10x50T Diablo Blade
• Easy to use
• The product is manufactured in China
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Imported

User questions & answers

Question:	Are these really made in China
Answer:	From what I have read, the Diablo series is made in Italy but who knows what really goes on these days? I am happy with the blade and at the price it is a good value. Could they have been made in Italy at one time and then sourced/made in another country later on? I can't say.
Question:	Why are the vents just printed on
Answer:	The vents are actually through-cut, then filled with a rubbery material. They really do work. These blades are far quieter than the stock blades that come on most saws.
Question:	Would you recommend this blade for ripping finished hardwood? I am looking for a good blade for ripping cabinet fillers, etc
Answer:	It depends on what the cabinets are made out of. If they're solid wood, yes absolutely this blade will do great, it leaves almost sanded smooth edges if your saw is setup right. If its plywood, or particle board, or mdf, I'd use a diablo blade meant for that kind of wood like the freud d1090x 90 tooth blade, that will leave sanded smooth edges on a plywood board, and wont tear up your veneer like the 50 tooth blade might.
Question:	Would this blade cut a flat bottom dado
Answer:	No - The better version, if you want to make smooth multiple passes for a dado is the more expensive, Freud LU84R011 which has a flat bottom edge on the first tooth after each gullet.

Product description

The Irwin Tools 1807368 Marples Laser Cut 10-Inch 50-Tooth Alternate Tooth Bevel with Racer Tooth Circular Saw Blade is part of a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry-leading laser-cut, thin kerf saw blades are produced in a highly-automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish professional woodworkers and finish carpenters demand. The blades are precision tensioned for flawless cuts. They also feature a heat resistant, non-stick coating that has an Aluminum Matrix added to it to dissipate heat for easy clean up and truer, cleaner cuts. The 10-Inch 50-Tooth blade features an alternate top bevel where the teeth alternate between a right and left bevel to form a knife like edge on either side for a cleaner cut along with a racer tooth to smooth out the cut. This blade is ideal for both cross cutting and ripping on a table saw or miter saw. The 10-Inch 50-Tooth blade is ideal for soft woods, hardwoods, composite materials, pressure treated lumber and plywood and does a great job cutting , melamine, veneered plywood, delicate molding and double sided laminates.

• Designed for General Purpose cutting on a Table Saw or Miter Saw
• Alternate Tooth Bevel with Racer Tooth for knife like cuts and racer tooth for smooth finish
• Extra Sharp oversized carbide teeth are re-sharp enable for long life
• Precision tensioned for flawless cuts
• Heat Resistant Non-stick coating reduces gumming for easy cleanup and truer, cleaner cuts

User questions & answers

Question:	inch, 80T (4935561) Max Rpm
Answer:	Max RPM: 6000
Question:	Can I use this on a table saw
Answer:	Yes, it works great. I have a portable craftsman professional table saw and these are the blades I run through them. Just make sure the arbor is the same size on your saw. Most are all the same unless you happen to have something different.
Question:	Hi, is this blade thin kerf or full kerf ? Thx
Answer:	No. If you look at the blade you will see the offset of the teeth with each tooth with a rake angle resulting in , if you look closely at the width of the kerf, a raised chevron.
Question:	Many people are having good luck cutting metal roofing panels. Anyone know what gauge steel that is? Can I cut 20 gauge sheet metal with this
Answer:	If you are referring to a hand-held 71/4" skillsaw, no it will not work. It will work on most any saw designed to accept 10" blades.

Product description

The Diablo 10in. 90 tooth ultra fine circular saw blade is a high-performance blade designed for cutting wood and wood composites. It cuts like a hot knife through butter. Features a super-thin laser cut kerf, Perm-Shield nonstick coating, laser-cut Stabilizer vents, tri-metal shock-resistant brazing and more. For use on 10in. Miter saws and table saws. Arbor size in. 5/8, corrosion resistant Yes, blades Qty. 1, blade use Wood, wood composites, Arbor Knockout No, blade diameter in. 10, tip type carbide, tooth grind Hi-ATB, engineered venting Yes, teeth Qty. 90, blade speed RPM 7, 000. Super-thin laser cut kerf for effortless cutting performance TiCo Hi-Density carbide provides a controlled carbide wear that stays sharper longer Perm-Shield nonstick coating shields the blade against heat, gumming and corrosion laser-cut Stabilizer vents trap noise and vibration and stabilizes the blade tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact laser-cut heat expansion slots allow blade to expand due to heat build-up, keeping the cut true and straight

• For use with miter or table saws
• Carbide construction
• Ultra-thin kerf design for easy cuts
• Shear-face grind design delivers effortless cuts with a reduced amp draw on tools for less material waste and to help maximize tool performance
• 10X90 ULTRA FINE FINISH DIABLO

User questions & answers

Question:	Does this fit Ryobi miter saw 10 in. Sliding compound? Will it good for cutting picture frame/molding
Answer:	It has a 5/8 hole arbor size. Which is very standard. Yes, works well on trim.
Question:	which is the measure of the shaft
Answer:	I think by "shaft" you mean "arbor". It is 5/8 inch.
Question:	works in melamine
Answer:	Works great on melamine.
Question:	What is the kerf of this blade
Answer:	The kerf is neither marked on the blade or the packaging. A search on the Freudtools.com website for a D1090X yields no result. Freud never heard of it. I emailed the company and was informed that the kerf on the Freud D1090X is .087 inch.

Product description

CRAFTSMAN saw blades are a great value for an economy blade. Induction-brazed carbide teeth provide durability and long life, while precision grinding makes for smooth accurate cuts. The steel plate is heat-treated to reduce warping and then a corrosion resistant coating is added to prevent rust.

• Induction-brazed Carbide tips for durability and long life
• Heat-treated plate eliminates warping
• Precision ground teeth for smooth, accurate cuts
• Corrosion resistant coating designed to prevent rust

User questions & answers

Question:	What size arbor do these fit
Answer:	5/8in
Question:	Are these flat kerf blades
Answer:	Pretty close. I was impressed. But they're not labeled as flat kerf, I believe.
Question:	Is the arbor size 1/2 inch
Answer:	Arbor Diameter = 5/8-in
Question:	Will these blades fit sears model number
Answer:	I think the saw number is 137.212410? If so, the blade should work fine as long as the arbor hole is 5/8" diameter. The blade should work for any saw requiring a 10" blade with 5/8" arbor.

• ▲Material - OVERPEAK saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades
• ▲Alternate-Top Bevel Teeth - The 10 inch saw blade with unique tooth design provides straight cuts and cutting smoother
• ▲Low Noise & Cutting Stable - 4 Laser cut expansion slots and 4 Laser-cut stabilizer vents trap noise and vibration, keeping it cool and reducing saw blade warp
• ▲Machine Use -The framing saw blade is great for circular saw, table saw, miter saw. RPM up to 6000
• ▲General Usage - The Overpeak 10 inch carbide blade is 60 tooth and suitable for ripping wood, crosscuts wood, plywood, and laminat

User questions & answers

Question:	What is width on blade
Answer:	kerf is the width of the blade
Question:	Will this blade cut 3/4" double sided melamine sheets
Answer:	No. It is a ATB grind. But cuts fairly fast and smooth.
Question:	Can i use this to cut PVC trim
Answer:	It should fit all modern 8/8.25 inch saws with a common arbor size. It does not fit a diamond arbor. Fits my old blue Ryobi 8 fine.
Question:	Good to cut 2" styrofoam insulation with
Answer:	1/16 Th of an inch.

Product features

Enjoy your cutting travel with OVERPEAK

OVERPEAK is a powerful company foucs on diamond tool products. After years of hard work and accumulation, our company has developed into a Large standardization Enterprises integrating design, production and sales.

OVERPEAK is a gold supplier to global traders and consumers. The company produces more than 10 million circular saw blades every year. Over the years, we have exported our products to many countries and regions all the world and accumulated a large number of customers worldwide.

Business philosophy: "rigorous, focused, professional"

Designer Tom: Innovation to provide the next generation of circular saw blades is at the core of our survival

Quality control: OVERPEAK manages the production workshop and process strictly.Each pair of saw blade must undergo two strict quality checks, including surface finish and Wire fluidity after completion

Why choose OVERPEAK circular saw blades?

OVERPEAK high performance wood saw blade cuts wood like a hot knife through butter, smooth, fast and perfect.

Our saw blades help maximize cutting accuracy and productivity, so you enjoy a great job and be able to complete more tasks in less time.

Key Features:

• Sharp blades: OVERPEAK saw blades are made of harder tungsten carbide, 4 sided grinded blades cut wood like butter
• More durable than others: Our saw blades are made of harder tungsten carbide and have a cutting life 5 times longer than others, professional designed for durability
• Smooth cut: The cut it leaves is so smooth that you may think it has been sanded by 600 grit sandpaper
• No chipping: The blade can be cut straight and realistically, it won't chip in soft wood, and the cutting edge looks like someone has polished it.

What can a good circular saw blade do for you?

Just like the old saying goes: 'A workman must sharpen his tools if he is to do his work well'. A sharp and durable saw blade can improve your work efficiency. If you make a living by cutting wood, or if you do some home building and handmade work, then the first step in your enjoyable cutting journey is to buy a satisfied circular saw in your hand.

If your old blade has a variety of undesirable conditions: it starts to become dull, the blade rolls up, or the cut is not smooth, then it is time for you to start a new attempt. Complaining all day can not help anything, this is where the Overpeak comes in.

Sharp teeth

The unique cemented carbide teeth can pierce wood like butter, helping to improve cutting accuracy and working efficiency.

Durable material

The OVERPEAK blade is made of harder tungsten carbide, which has a cutting life 5 times longer than others. Even after several repeated cutting tests, it will not become dull and warp its blade.

Smooth cut surface

The blade can be cut straightly and realistically, and will never crack in soft wood. The smooth cut it leaves will make you think it has been sanded

Product description

The DEWALT DW3106P5D0I Series 20 10-Inch 60T Fine Finish Saw Blade (2pk) is ideal for all cutting applications in softwood, hardwood, chip board or plywood using a table saw or miter saw. Professional quality thin kerf carbide saw blades produce a smooth finish with minimal material waste.

• Thin kerf for fast and smooth cutting action
• Computer balanced plate reduces vibration for improved accuracy and better finish
• Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy
• Includes:1Pack with 2 Blades.

User questions & answers

Question:	What is the kerf? My portable Dewalt table saw has a minimum or
Answer:	Plunge stroke is 2 11/64”.
Question:	Why is amazon charging $10 more than home depot?? what a joke so much for the savings you use to get through amazon
Answer:	110VAC
Question:	Does this universally? I have a 10 inch Hitachi miter saw? Thanks
Answer:	small
Question:	CAN THIS BLADE BE USED FOR
Answer:	Good router bits.

Product description

This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD™ coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick. 9" Blade Diameter, 5/8" Arbor, 22 ATB Teeth, ATB Grind, .094" Kerf (K), 20° Hook Angle, .071" Plate (P) Ideal For: Heavy-Duty Ripping Blades For Underpowered Saws. Depth of cut (3/4" to 2-3/4"). Application: Ripping. Made In Italy.

The 9-inch Freud LU87R009 Thin Kerf Rip Saw Blade makes quick work of ripping operations in hard- and softwood. It features 22 flat, oversized teeth with thick TiCo high-density carbide tips designed to last, in addition to Freud's Perma-SHIELD coating, which reduces friction to prevent heat buildup. Plus, since it's a thin-kerf blade, it wastes less material and continues to cut cleanly when used with underpowered saws.

Large-Tooth, Thin-Kerf Blade Ideal for Low-Horsepower Saws

This rip saw blade is ideally suited to ripping hard-and softwoods, and it also delivers strong results when crosscutting wood or working with plywood. Ideal for working with materials that are 3/4 to 2-3/4 inches thick, the blade can also handle thinner or thicker materials, and it can be used to cut chipboard or laminates. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.094 kerf.

In addition to offering faster cuts through tough materials, its large tooth design allows the blade to be safely sharpened more times, prolonging the life of the blade and saving you money. Plus, the large gullets between these teeth ensure easy chip removal.

Well-Balanced, Anti-Vibration Design

This Freud blade is pretensioned for truer cuts under heavy loads. It also features an anti-vibration design that reduces chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.

High-Density Carbide for Maximum Cutting Performance

This thin-kerf rip saw blade's 22 teeth are finished with tips made from an application-specific TiCo high-density carbide "ripping blend" that offers improved density, hardness, corrosion resistance, and heat resistance.

Ideal for the demands of ripping large quantities of thick, hard wood, this carbide blend includes extra cobalt for increased impact resistance. Plus it delivers increased sharpness and edge retention, which means the blade will hold up longer--saving you money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup

Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing

An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box

Freud LU87R009 Thin Kerf Rip Saw Blade--9-inch diameter, 5/8-inch arbor, 22-tooth design.

From the Manufacturer

The LU87R series blades are the blade to pick when you want clean, fast, glue line rip cuts with less drain on your saw and less material waste. Industrial Perma-SHIELD coating on the laser cut, hardened steel blade bodies keeps the blade cool and straight in t

• Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
• Thin Kerf allows for faster feed rate and reduced waste
• Positive Hook Angles for fast cutting and easy feeding in ripping applications
• Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

User questions & answers

Question:	How much difference between this blade and 1024x besides 10 bucks and ftg/atb
Answer:	I was using the blade to cut 3/8" 6061-T6 aluminum plate, and had no problems. Whether you can cut thin parts without bending will likely depend upon how well those parts are supported and the feed rate. Given the relatively-low cost of the blade, it would seem worth trying.
Question:	Is this blade compatible with a splinter guard that was registered using the standard 2.2 mm kerf blade that came with my TS55 REQ
Answer:	No, I didn’t try that and I seriously doubt if it would be successful. If I was you I’d try to find an old fashioned very fine (many many toothed steel blade. They used to call them a plywood blade sometimes. And to prevent the blade from grabbing because vinyl siding is very thin, run the blade backwards, yes turn it around so it’s spinning backwards and feed slowly and it will cut very nicely and will not grab or snatch and smash the plastic and most importantly, you will be safe. I’ve done this and I know it works. Even if you can only find an 8” or 9” very fine steel blade, that would still be ok because vinyl siding isn’t thick like a 2 X4, it’s less than 1” thick. A carbide blade has teeth that are too large, even this 80 tooth blade and the thin plastic will fit right between them and be dangerous, smashing through the material. What you want is a circular blade with teeth that aren’t much bigger than a hacksaw blade.
Question:	What's the difference with other same products
Answer:	I cut mainly hardwoods, but being carbide tipped I would not hesitate to use it on plastics. I love their blades and will buy them again.
Question:	What does FTG mean? Does this blade give a flat bottom cut? Thanks
Answer:	Not for me. Get 80 tooth of more