14 best bosch contractor table saws

Product description

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4. 0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The Smart Guard System features a three-position adjustable riving knife, anti-kickback pawls and non-obstructed-view barrier guard assembly. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

• Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Dimensions: 32.5" D x 27" L x 13" H | Product Weight: 94 lb
• Saves space: Large cast aluminum top provides increased work space and material support with a 25 inch. Ripping capacity to cover all typical job site rip cutting widths
• Portability: Works seamlessly with the included lighter GTA47W gravity rise wheeled stand for easy job site mobility, with single action setup and take down
• Protection: Smart guard system contains riving knife and Anti Kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Soft start circuitry: Manages the intensity of motor start up and minimizes the possibility of tripping a circuit breaker

User questions & answers

Question:	will this connect to the festool 27mm dust collector
Answer:	Don't know that item, but the exhaust/dust port on the Bosch mikes out @ 2.50" OD and 2.25" ID; so, w 27 mm close to 1.06"...likely not And FYI, bought the official Bosch dust collection bag which does a poor job...I use my VacMaster hose- the outer nozzle plugs snugly into the Bosch port's ID and picks up 80-90 % of the wood dust generated...as long as I remember to turn the vacuum on..which I sometimes don't ...love this table saw
Question:	Can a dado blade be used in this saw
Answer:	Yes, the 4100XC-10 table saw can dado cut by using TS1007 dado insert. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	is this saw equipped with the Reaxx system
Answer:	No
Question:	how tall is this saw/stand when folded / stored
Answer:	The table height from floor is 32.5". Its dimension is 27in x 32.5in x 13in. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4.0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

Features

• Powerful table saw – has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Large cast aluminum top – provides increased work space and material support with a 30 In. ripping capacity
• Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
• Constant Response circuitry – helps maintain speed under load
• Restart protection – helps to avoid accidental startup
• Portability – works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• SquareLock rip fence – engineered for enhanced clamping and trueness
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Onboard storage – allows for access to all included components

Product description

• Your purchase includes one Dewalt table saw, 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual
• Other Specs: Max rip to left of blade – 22” | Max rip to right of blade – 32-1/2” | Max width of Dado – 13/16” | Arbor size – 5/8” | Amps – 15 | Depth of cut at 45° – 2-1/4” | Depth of cut at 90° – 3-1/8” | No Load Speed: 4800 RPM
• Rolling stand designed for easy set up and breakdown with excellent stability
• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	Can't see why not. Look online for Garmin-compatible charts, whether from Garmin or not. (My hiking map, with contours and more trails than the USGS maps, was a free download! Look around.) The eTrex models are waterproof, which is a plus. Think seriously about the display size, though. The whole unit fits in the palm of your hand, and its display is only a couple inches high. (See the specs. I might be off a little.) We hikers and hunters can stop and consult the unit, then start walking again. Your boat might travel quite a distance while you peer at that tiny screen, even with the engine stopped. Just a thought.Garmin obviously had boaters in mind when they programmed this, regardless of its size. It even has a "Man Overboard" function that instantly records its current location, then displays the distance and direction back to there while you turn the boat around. It shows tides, too, at whatever tide stations are close to you. Bottom line: it will do everything you need (I think) and do it all day and on into the next morning on a pair of AA cells, but your eyes will ask you why you didn't buy something with a bigger screen.
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	The maps that come preloaded are: Worldwide DEM Basemap (NR), Digital Globe demo (Jnx) and USGS Quads - Grand Canyon National Park (Jnx). Unfortunately, you will have to get the topo maps separately.
Question:	Does this saw accept dado blade set
Answer:	yes on the compass (electronic) but turn on the WAAS depending on if you set the compass for a true north or magnetic north WAAS gets rid of the errors jumping from satellite to satellite
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	The Oregon and all the Garmin "state" models all have a touch screen, don't they? The eTrex series doesn't. For controls it has the Power/battery check button and "back button on the right, and on the left, the zoom-in and -out buttons, plus the Menu button. On the front, at top-right, is the main control, a little thumbstick. Use it for scrolling and selecting menu items and for moving the map beyond your location.You'll want to spend some time reading the manual; this thing has a LOT of functionality. Most important shortcut: no matter how deep you go in the menus, double-tapping the Menu button takes you back to the main screen, with Map highlighted.

Product features

10" Jobsite Table Saw 32 - 1/2" (82.5cm) Rip Capacity, and a Rolling Stand

The DWE7491RS 10" Jobsite Table Saw 32 - 1/2" Rip Capacity, and a Rolling Stand has a 15 Amp motor and 32-1/2" rip capacity to allow cutting of large and hardwood materials. Features tool-free guarding component adjustments and fast, accurate fence adjustments. Rolling stand designed for easy set up and breakdown with excellent stability.

• Material support, can be used for narrow rip cuts
• Onboard storage system provides easy access to the Blade Guard Assembly, fence, riving knife, miter gauge, wrenches, push stick, and cord wrap when not in use
• Telescoping fence rails retract to create a small, portable package
• 15 amp Motor quickly rips through hardwoods with ease

Features

• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• 32-1/2" rip capacity easily cuts a variety of larger shelving and trim materials
• Rolling stand designed for easy set up and breakdown with excellent stability
• Flip over ripping fence allows for narrow rip cuts
• 2-1/2" Dust Collection Port easily connects to a vacuum for efficient dust extraction
• 21-7/8" X 26 - 3/8" table provides superior material support

Product description

The Bosch 4100 10 10 In. Work site Table Saw with Gravity Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15 Amp saw delivers 4. 0 max HP for outstanding productivity. It also incorporates soft start circuitry for smooth but quick ramp up to the operating Speed to manage the intensity of motor start up and minimize the possibility of tripping a circuit breaker. It includes constant response circuitry to help maintain Speed under load, and overload protection. The square lock rip fence is engineered for maximum trueness and great ease of use, with the fence able to easily glide along the rail for one handed operation. The lighter GTA47W gravity rise wheeled stand has 8 In. treaded rubber composite tires and a single action design for easy set up and transport. It is job site ready with heavy duty construction. The smart guard system is the first modular table saw blade guard, featuring a three position adjustable riving knife, anti kickback pawls and non obstructed view barrier guard assembly. The table saw provides a 29 In. x 21 1/2 In. square tabletop with a 25 In. rip capacity for ripping 4 Ft. wide sheets goods in half. SquareLock rip fence – engineered for enhanced clamping and trueness.

Dimensions: Table saw & stand combination in working position = 30.25" Depth (front to back) x 47" Width (when extension is at in-most position) x 35.5" Height. Table-top dimensions = 21-1/2" Depth (front to back) x 29" Width (when extension is at in-most position). Weight: 58.0lb,Weight of Bare Saw - Lb: 63.0,Weight of Saw, Standard Equipment and Stand - Lb: 92.0,Width: 32.0. Works With: Vacuum Hoses-Common 2-1/2" Vacuum Hoses,Vacuum Hose Adapter for 35 mm Vacuum Cleaner Hoses-VAC004,Dust Bag-TS1004,Zero-Clearance Insert-TS1005,Dado Insert-TS1007,Molding Insert-TS1009,Outfeed Support-TS1016,Left-Side Support-TS1008.

• Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Dimensions: 37.7" D x 29.4" W x 19.4" H | Product Weight: 110 lb
• Large cast aluminum top – provides increased work space and material support with a 30 In. ripping capacity
• Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
• Constant Response circuitry – helps maintain speed under load
• Restart protection – helps to avoid accidental startup
• Portability – works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut

User questions & answers

Question:	Bosch 4100-10 lists two weights 60 lbs and 124.2 lbs...Why is there a difference
Answer:	The table saw itself weights about 60lbs, if you include the stand with the wheels added to the saw it weights more. I believe the d/c 4100-9 weights 124.2 with all the accessories. The 4100-10 is listed as weighting about 110lbs shipped, so 110lbs is the weight with everything attached. Does that help make more sense?
Question:	is there a schematic available for this table saw
Answer:	I don't know how detailed you want to get, but by downloading the owner's manual you get the parts breakdown schematic
Question:	I want to be able to cut a 4 by 4. can i replace the blade with od greater than
Answer:	NO you cannot. A greater diameter blade say 12" would bottom out on the framing below and would reduce the life of the motor as well.
Question:	Max blade height above table
Answer:	Hi! The maximum depth of a cut at 90 degrees for a blade on the 4100-10 Table Saw is 3-1/8". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Portability

Works seamlessly with the included Gravity-Rise Wheeled Stand.

Soft-Start Circuitry

Manages the intensity of motor start-up and minimizes the possibility of tripping a circuit breaker

SquareLock Rip Fence

Engineered for enhanced clamping and trueness

Smart Guard System

Riving knife and anti-kickback pawls provide protection.

Product description

For a cleaner home, ship and cleaner air; the Miles craft Dust Cutter cuts dust by over 90%

• Nylon
• Quick and easy installation
• Never needs removing to empty
• Fits many different table saws (having base dimensions up to 20" wide and 17" deep)
• Optional and easy vacuum connection
• Comes in 3 modes: collector, funnel and vacuum

User questions & answers

Question:	Will it fit a skil 3410-02 10-inch table saw with folding stand
Answer:	Go to a camping source like Campers World and search for black or grey water flush out valves for the holding tanks. Should find a solution there for somewhat low cost.
Question:	How tall is it? As in from the bottom where the opening is to the top where it attaches to the stand/saw
Answer:	I didn't hook them up to 4inch. I ran 2 3/4 flex and pvc. Btw...it clogs up with saw dust. I drilled a hole on side opposite the slide with a forsner bit to blow it out. I cover the hole with duct tape.
Question:	How does it attach to the table saw base? Velcro
Answer:	No, They are 3 11/16 id and 3 13/16 + 1/32 od. There is nothing 4" here.
Question:	Does it include the adapter to use with 2 1/2” dust collection
Answer:	I used 4" schedule 40 PVC and it fit snugly on the 4" blast gate. I also drilled and screwed two sheet metal screws per blast gate (along with silicon sealer)

Product features

Milescraft 1500 DustCutter

The Milescraft DustCutter will keep the air in your shop and home cleaner! Table saw dust collector cuts by over 90%. For a cleaner home, shop and cleaner air. Use your saw indoors or out. The DustCutter fits most table saws having base dimensions up to 20 in. W and 17 in. D and will connect to vacuum hoses of 1-1/4 in. and 2-1/2 in.

Collector Mode

After using the saw, empty dust into a receptacle by unzipping the bottom of the DustCutter. Bag capacity is 3 cubic feet.

Funnel Mode

Continuously empty dust by unzipping the bottom of the DustCutter, allowing dust to funnel into a receptacle

Vacuum Mode

Attach a 1-1/4″ or 2-1/2″ vacuum hose to the DustCutter and suck it out of the bag and air while operating the table saw

Product description

The DEWALT DW7451 compact table saw stand delivers the best of both worlds: solid construction for a safe work environment and a compact, folding design for easy transport and storage. Heavy-duty tube steel construction provides the strength you need for safe operation. Integrated support bar hardware holes for secure fastening of saw to the stand. This stand is lightweight; it folds flat for easy handling, storage, and transport. Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw. Backed by a 3-Year limited warranty.

• Heavy-Duty tube steel construction provides the strength you need for safe operation
• Upport bar hardware holes for secure fastening of saw to the stand
• Lightweight; folds flat for easy handling, storage, and transport
• Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw

User questions & answers

Question:	does anyone have instructions to put the saw on the stand? #dwe
Answer:	You can view or download instructions via https://servicenet.dewalt.com/Products/Detail?productNumber=DW7451
Question:	I have the dwe7490. what is the correct stand for that model
Answer:	You can order stand #N272401 online or via the following link: https://servicenet.dewalt.com/Parts/Detail/320318
Question:	Do the legs adjust for uneven ground
Answer:	No, the legs are not adjustable.
Question:	Do this stand is foldable pretty easy for transportation
Answer:	Yes, it folds up very easily. However, it is bolted to the table saw, and it will not fold when attached, (which is good thing when you are using it!). What I do, when I haul this table saw, is just lay it on its side (with the stand attached) in the bed of the truck. It saves me unbolting the stand to haul it, and bolting it together again to to use it at the job site. The table saw that fits this stand is very light, so moving or lifting it with the stand on is no problem.

Product features

DEWALT DW7451 Compact Table Saw Stand

The DEWALT DW7451 table saw stand delivers the best of both worlds: solid construction for a safe work environment and a compact, folding design for easy transport and storage. Featuring heavy-duty tube steel construction that can support the stress of tough saw jobs, this stand is designed for use with the DWE7480 (10" Compact table saw) DCS7485 (60V 8 1/4" Table Saw) and the DW7450 (10" Compact table saw). DEWALT DW745 10-inch compact job site table saw. Integrated support bar hardware holes make it easy to secure the saw to the stand for confident operation.

Product description

Makita’s 10” Compound Miter Saw (model LS1040) combines power, performance, and ease of use for most common miter cuts including a range of applications including woodworking, cabinetry, deck building, framing, and more. 15 AMP Motor for Improved Performance The LS1040 has a dynamically balanced 15 AMP direct drive motor with 4,600 RPM for improved performance. The direct drive motor with soft start delivers smoother start-ups and constant power, with no belts to slip or replace. Precise Miter and Bevel Cuts The LS1040 has a dual post compound pivot arm, with bevel cuts up to 45° to the left. Miter adjustments range from 0°-45° (left) and 0°-52° (right), with 9 positive miter stops at 15°, 22.5°, 30°, and 45° (left or right), and 0° (90° cuts). The precision-machined aluminum base ensures accurate cuts. Ease-of-use and comfort features include a fluorescent light that works independently of the blade rotation to clearly illuminate the work surface, and a compact size (weighs only 27.3 lbs.) for easy portability. Best in Class for a Range of Applications The LS1040 is engineered for a broad range of trades, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, decking and flooring applications, siding installers, general contractors seeking a best-in-class 10” compound miter saw for the jobsite or the benchtop.

Makita's LS1040 10-Inch Compund Miter Saw combines power, performance, and ease of use for common miter cuts, including a range of applications in woodworking, cabinetry, deck building, framing, and more.

View larger

LS1040 Features PERFORMANCE - Powerful 15 amp direct-drive motor and 4,600 rpm for improved performance CAPACITY - Miter cuts 0° - 45° left and 0° - 52° right; 9 positive stops for common miter cuts ACCURACY - Dual post compound pivot arm, bevel cuts up to 45° to the left PORTABILITY - Weighs only 27.3 pounds INCLUDES - C.T. blade, vertical vise, wrench, triangular ruler, and dust bag

Tool Specifications Blade Diameter 10" Arbor 5/8" Max. Cutting Capacity (Bevel/Miter) 90°/90° 2-3/4" x 5-1/8" Max. Cutting Capacity 45°/45° 1-3/8" x 3-5/8" No Load Speed 4,600 rpm AMPS (120V) 15 Dimensions (L x W x H) 20-7/8" x 18-3/4" x 21" Net Weight 27.3 lbs.

15 AMP Motor for Improved Performance

The LS1040 has a dynamically balanced 15 amp direct-drive motor with 4,600 rpm for improved performance and is engineered to never slip or bog down like belt-drive units. The electronic speed control maintains constant speed under load, and the soft-start technology is engineered for smooth start-ups.

Precise Miter and Bevel Cuts

The LS1040 has a dual post compound pivot arm with bevel cuts up to 45 degrees to the left. Miter adjustments range from 0 to 45 degrees left and 0 to 52 degrees right, with 9 positive miter stops at 15, 22.5, 30, and 45 degrees (left or right), and 0 degree (90-degree cuts). The engineered aluminum base ensures accurate cuts. Ease-of-use and comfort features include a fluorescent light that works independently of the blade rotation to clearly illuminate the work surface and a compact size (weighs only 27.3 pounds) for easy portability.

Best in Class for a Range of Applications

The LS1040 is engineered for a broad range of trades, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, decking and flooring applications, siding installers, and general contractors seeking a superior 10-inch compound miter saw for the jobsite or the benchtop. The LS1040 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Saws

Cut after cut, Makita saws deliver power, performance, and capacity with less weight and more ease-of-use features. Makita has a full range of corded and cordless saws and blades for cutting wood, metal, and masonry, including table saws, miter saws, reciprocating saws, circular saws, jig saws, metal cutting saws, plunge saws, and more, as well as a complete line of blades and accessories.

About Makita

Makita is a worldwide manufacturer of industrial-quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are compact and energy efficient, yet deliver industrial-strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best-in-Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box

Makita LS1040 10-Inch Compound Miter Saw, 10-inch C.T. blade, vertical vise, wrench, triangular ruler, and dust bag.

• Powerful 15 AMP direct drive motor for improved performance; 4,600 RPM
• Dual post compound pivoting arm
• Miter cuts 0-45 left and 0-52 right
• Positive miter stops at 9 settings: 15, 22.5, 30, 45, right or left and 0 (90 cuts)
• Bevel cuts up to 45° to the left
• Weighs only 27.3 lbs. for easy portability
• Precision machined aluminum base ensures accurate cuts

User questions & answers

Question:	in my country, we use 220v, can I plug this item to my current circuit
Answer:	No. 120 volts AC single phase
Question:	As of Mar 2018, Does it still cut an arc when sliding, as opposed to a straight line
Answer:	Mine does not. Be careful with damaged packaging and saw impact
Question:	Does the laser show both sides of the blade, that is is it a dual laser? Also does the laser have a separate switch or is it centrifical
Answer:	The laser is on one line only and it can be switched left or right of the blade. There is a separate ON/OFF switch for the laser
Question:	will it cut 4in x 4 in timber
Answer:	Yes, if you make 2 cuts. The only saw I know of that will do it in 1 cut is a Chop saw with a 12" blade. Or a Radial arm saw. But it needs a 12' blade too.

Product description

The Makita 7-1/4” magnesium hypoid saw features highly durable magnesium components and a powerful 15 amp Makita-built industrial motor with a hypoid gearing system for maximum power output. The 5377MG seamlessly balances weight, Power, durability, and ease of use for optimum cutting performance.

The Makita 7-1/4-Inch Magnesium Hypoid Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor and hypoid gearing system for maximum power output. The 5377MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market.

• Powerful 15.0 AMP motor delivers 4,500 RPM with compressed winding technology to keep the overall size more compact yet deliver jobsite durability
• Magnesium components create a lightweight saw (13.2 pounds) that is well balanced and jobsite tough
• Retractable hook allows tool to remain close by, but never in the way
• High quality, heat treated hypoid steel gears do not prematurely wear like traditional bronze-alloy worm drive gears
• Oil bath technology is created with a built-in fan and sealed gear housing to ensure 100% oil surface coating for less maintenance
• Make quick, one-handed adjustments using large, rubberized levers
• Better fit and more control with comfortable rubber grip on handle

User questions & answers

Question:	Why is this saw listed as having hyploid gears? It does not have them
Answer:	The major difference between hypoid saws and worm-drive gears is their power transmission. The worm-drive works like the steering gears on a car while the hypoid resembles the rear gears of a car i.e. bevel gears. They can be used together especially where long precision cuts are required.
Question:	Where is this product manufactured? Thank you
Answer:	Typically, the country of origin is China.
Question:	does this product come with a carring case
Answer:	No it does not. It comes in a cardboard box.
Question:	i want interest the saw made in japan , I'll pay more
Answer:	Get familiar with the following sentence, Most of the worm drive saws are" MADE IN CHINA "more money will not change that sentence....

Product features

Makita 5377MG 7-1/4" Magnesium Hypoid Saw

The Makita 7-1/4” Magnesium Hypoid Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor with a hypoid gearing system for maximum power output. The 5377MG seamlessly balances weight, power, durability, and ease of use for optimum cutting performance.

Saw features a Makita-built 15 AMP industrial motor that delivers 4,500 RPM, combined with well-balanced magnesium components for a lighter weight saw that delivers true power the professional user demands. Users will benefit from the precision-machined hypoid gears, which deliver more constant power than worm drive gears. Hypoid gears have greater surface contact so more power is transferred over a wider surface, providing increased power and durability. In addition, hypoid gears are in an oil bath for consistent oil coverage. The saw has a large cutting capacity (2-3/8” at 90°) with a maximum bevel capacity of 51.5° and positive stops at 22.5°, 45° and 51.5° for quick back-and-forth changes.

Ergonomic and Ease-of-Use Features

Magnesium components allowed Makita to engineer a saw with less weight (13.2 lbs.) that is well-balanced and jobsite tough. Additional design details include greater clearance between the rear handle and the blade case to provide a better grip for larger hands or for users with gloves, as well as a wider space between the blade and housing for a clearer view of the blade and measurement scale.

Engineered for a Range of Applications

The 5377MG is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; as well as ripping panels such as plywood, OSB, particle board, and dense structural panels. Other applications include plunge and bevel cutting.

Magnesium Innovation

Framers and carpenters need cutting solutions with power and performance -- not extra weight. Makita circular saws with Magnesium components are engineered for less weight with superior balance and durability. Magnesium circular saws deliver consistent performance with less weight for cutting sheet and dimensional lumber.

Product description

Miter Saw Stand, Length 51 In., Width 27-3/4 In., Height 33-1/2 In., For Use With Mfr. No. 5312, 4212, 4410, 5412, 4410L, 5412L, and 4212L, Features Supports up to 18 ft. of Material, Adjustable Telescoping Leveling Legs, Adjustable Height, Universal Mounting System, and Rubber Wheels, Includes Universal Rapid Release Tool Mounts

The Bosch TB4 gravity-rise miter saw stand features the patented gravity rise system, and rapid set up and breakdown. It has an 18-inch material capacity which is the highest capacity among fully portable units. It has 8-inch pneumatic wheels which facilitate ease of transport over jobsite terrain. It also features rapid release tool mounts, adjustable leveling feet for stability on uneven surfaces and it also fits most competitors' miter saws.

From the Manufacturer

Bosch expanded its patented and award-winning technology to develop and introduce the new Gravity-Rise T4B Portable Miter Saw Stand. Smart, durable and simple to use, professionals never need to worry about how to setup or carry their miter saw ever again. The T4B features the same Bosch-patented Gravity-Rise system as the industry's award winning TS2000 Gravity-Rise Table Saw Stand. Unlike other miter saw stands, the Bosch Gravity-Rise system is practically effortless and allows for rapid set-up and breakdown in seconds. With a simple turn of the release lever and the user's guidance, the weight and balance smoothly raises the heavy-gauge steel and aluminum constructed stand and saw into working position. Set the leveling-Feet for uneven terrain and professionals are ready to get to work. Turn the same release lever again and the entire stand folds into a push cart design, complete with 8-Inch pneumatic wheels, perfect for transporting the saw over rough terrain from one location to the next. The T4B utilizes an aluminum support rail and special Universal Rapid-Release Tool Mounts designed to attach to the base of all Bosch and most competitors' miter saws. These mounts allow any user to quickly attach or detach the saw to the stand. And rubber-Feet prevent scratches when placing the tool on a cabinet top or bench. The same support rails expand for 18-Feet total material support, the highest among fully portable units. For users cutting long pieces of molding or flooring, this kind of support is priceless. Adjustable repetitive stops and table supports also allow the stand to adapt to varying applications and saws.

• ADJUSTABLE: Featuring a Bosch-exclusive, patented Gravity Rise System designed for rapid set up and easy breakdown, taking the toughest jobs to the next level
• CAPACITY: The Bosch T4B Gravity-Rise Miter saw stand has up to 18 feet of material capacity, the highest capacity among fully portable units
• PORTABLE: Built with 8-Inch pneumatic wheels for ease of transport over jobsite terrain with even the heaviest miter saws attached
• UNIVERSAL: Featuring Rapid Release tool mounts - for use with most major competitors miter saws. Adjustable out feed -up to 12 inch in height
• DURABLE: Equipped with adjustable leveling feet for stability and durability on uneven surfaces. Material - Steel

User questions & answers

Question:	can it be wheeled though a standard size door with saw on
Answer:	Thank you for your question. The T4B will fit through a standard size door. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	Are extra mounting brackets available? If so, where? I would like to use this stand with multiple saws
Answer:	1609B02007 is the bosch part number for the brackets. Amazon has them if you search the number, however as of this posting they are on the order of $10 cheaper direct from bosch. Can't say how shipping/handling/tax compares.
Question:	Do the ends of the support arms flip up to act as a stop when I want to cut several pieces the same length
Answer:	The end pieces move up and they can be used as stops, but I find they are a bit "wiggly" and seem cheaply constructed. I do not rely totally on them for stops; I clamp a piece of wood to the arm and make it as firm as possible. Maybe the one I got is not as well built as the ones used by the authors of the other two answers.
Question:	Would the Hitachi C12RSH 15 Amp 12-Inch Sliding Compound Miter Saw with Laser fit this stand
Answer:	Trini, I would believe John Cottingham's review, since he has one. The mounting system is very accomodating. The saw only needs four bolt holes in its base. The mounting bars on the stand can be placed anywhere along the center rail to accomodate the width of the saw base and the length of the bars can handle most depths of the saw since the attachments are in slotted holes. The rear mounting holes also have some play sideways so the rails can handle a saw that has different spacings of the rear and front bolt holes. I have a 12" DeWalt saw and this stand makes hauling it around real sweet. Also, setup for operation is really quick. The laser guide should not be an issue.

Product features

Added Precision and Peformance for your Benchtop Tools

Bosch benchtop tools provide the precision and performance your projects require. Durable quality is not only in every tool, but the trust you have in Bosch benchtop tools. The integrated out feed and supports holds up to 18 ft of material. The universal mounting system allows for use with all major competitors' saws. Equipped with an adjustable telescoping levelling leg to provide stability on uneven surfaces.

Features

• Integrated out feed and supports — up to 18 Ft. of material support capacity
• Adjustable telescoping levelling leg — provides stability on uneven surfaces
• Adjustable height out feed
• Universal mounting system — for use with all major competitors' saws
• Integrated rubber wheels — easily move stand with saw attached from jobsite to jobsite
• Adjustable height out feed

Product description

The Miles craft model 1406 Feather board features a dual slide motion design for quick and easy setup as well as a unique pre-load design that allows the appropriate amount of tension to be set consistently. The Feather board includes 3/4-inch and 5/8-inch Miter bars as well as T-Slot bolts allowing it to be used in nearly any application on router tables and table saws.

From the Manufacturer

The Milescraft Model 1406 FeatherBoard features a dual slide motion design for quick and easy setup as well as a unique pre-load design that allows the appropriate amount of tension to be set consistently. The FeatherBoard includes 3/4-Inch and 5/8-Inch miter bars as well as T-Slot bolts allowing it to be used in nearly any application on router tables and table saws.

• This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
• Pre-load tension design maintains consistent pressure across face of the feather board
• 5/8" And 3/4" Metal miter bars fit all standard miter slots
• Dual Slide Motion-side to side and forward action for quick and easy setup
• All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
• Split rail miter bar construction-provides maximum hold
• Ergonomic knobs help prevent over-tightening and provides non-slip loosening

User questions & answers

Question:	I have a Tacklife 10 inch table saw and I put the feather board in the track on the left and it comes up a considerable amount short any advice
Answer:	Loosen wing nuts on featherboard and slide it toward the blade.
Question:	What holds this thing in the miter slots on the table
Answer:	The gray bar on the bottom in the picture fits in the miter slot and is expanded when when you tighten the red knobs on topscott vmtw
Question:	Can this can be flipped over to allow lhs or rhs mounting? my mitre track is on the rhs of the table
Answer:	best for older table saws to prevent kick back of wood when cutting with out a riding knife even new saw with riding knife could use extra protection
Question:	how many featherboards do I heed for a table saw, one or two? Thanks, Max
Answer:	Depends on the size of the saw. Just don't use one after the cut (i.e. beyond the blade), as it could cause binding and dangerous kickback.

Product features

Milescraft FeatherBoard

Reduce kickbacks by applying proper and consistent tension between a work piece and the fence of a power tool with the FeatherBoard. Versatile enough to be used in almost any table saw or router application. This handy safety device includes 5/8″ and 3/4″ miter bars and T-slot bolts to work in unison with your trusty power tool.

3/4″ and 5/8″ Miter Bars

Depending on the dowel size you are working with, you can center your work piece on the corresponding busing, by using the simple, easy to use self-centering posts.

Split Rail Construction and Knobs

Easily adjust to the depth of the board so that each hole will be precise from one to the next, when using 1/2″ to 1-1/2” thick lumber.

Unique Pre-Load Design

For durable and accurate location marking of dowel holes or in the second board being joined.

Includes 3 sizes – 1/4”, 5/16”, 3/8”

Product description

Take the back-ache out of setting up and breaking down your table saw with the revolutionary new Gravity-Rise wheeled saw stand from Bosch. Designed for general contractors, trim carpenters, woodworkers and remodeler, the Bosch TS2000 gravity-rise stand is a rugged, portable, and, best of all, easy-to-use. Setup is a snap! Simply turn the release lever, put your hand on the tabletop and the stand raises and lowers relative to your hand pressure so that you can find just the right height for your tired back. Constructed of heavy gauge tubular steel, the gravity-rise stand is built to withstand the toughest jobsites. 8-Inch treaded pneumatic wheels easily handle rough terrain and make tool transport nearly effortless. The gravity-rise is equipped with universal mounting slots, which are designed to accommodate most major manufacturers' portable table saws.

• 8-Inch treaded wheels - handles rough terrain
• Universally adaptable - mounting holes for competitors' table saws - DeWALT, Makita, Hitachi, Craftsman, Ridgid
• Gravity-Rise stand - Bosch exclusive design for easy table saw setup and table down
• Exceptional portability - quick and easy transport between job sites
• Heavy duty construction - withstands 250 lbs. of downward force

User questions & answers

Question:	What is the footprint of this stand when closed and upright
Answer:	The TS2100 Gravity Rise Stand dimensions are: 23W x 28L x 22H when folded and sitting on the ground. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	I have a Bosch 4000 series table saw. What would be the height, width, and depth of the saw mounted on the stand? I have limited space in my garage
Answer:	Thank you for your question. The TS2100 and 4000 mounted together are: 48" L x 28" W x 35" H. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	What is the height of this stand when open
Answer:	Thank you for your question. The TS2100 is 22" in height. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	How is this different from the Bosch TS2000 model
Answer:	Thank you for your question. The TS2100 is designed for use with our GTS1041A table saw. It sits 3 inches lower as the GTS1041A is taller than our 4100 and 4000 series table saws. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).

Product features

TS2100 Gravity-Rise Wheeled Low-Stance Table Saw Stan

The Bosch TS2100 Gravity-Rise Wheeled Low-Stance Table Saw Stand was engineered to help users find the ideal working height for their table saws. It provides a lower stance than the Bosch TS2000 but deliver the same great technology that makes setup and take down quicker than ever. The stand is compatible with the Bosch REAXX, 4100 and GTS1031 table saws, and it can accommodate many competitive saws from DeWALT, Makita, Hitachi, Craftsman, Ridgid and more. It's extremely portable: 8-Inch wheels with treaded, solid non-pneumatic tires can handle the toughest terrain with ease and never go flat, and it weighs 52 Lbs. The stand collapses into a dolly, making it easier to transport the saw and the stand together. Its collapsible design minimizes storage space requirements, so transporting this stand to, from, and around the jobsite is a breeze. The durable stand withstand up to 250 Lbs. of downward force, and it has a powder-coat finish for longevity.

Includes:

Table Saw Stand.

Easy on your back

The Bosch TS2100 helps to alleviate the backache out of setting up a table saw with the Gravity-Rise system. Simply turn the release lever, and the stand simply raises to the working height, which is optimized for working with portable table saws of varying heights.

Ready to Roll

The Bosch TS2100 collapses into a dolly, making it easier to transport the saw and the stand together. The 8-Inch wheels with treaded, solid nonpneumatic tires can absorb the shock of dirt, unfinished floors, concrete and more – and never go flat. The stand's collapsible design minimizes storage space requirements, and it weighs 52 Lbs. The TS2100 is designed so that the stand and saw can be easily be moved on and off of a pickup truck.

Heavy-Duty Construction

Fabricated from 1-1/2-Inch heavy gauge steel tubing, the Bosch TS2100 Gravity-Rise table saw stand can survive wear and tear from punishing professional use. The table saw stand can withstand up to 250 Lbs. of downward force. Built to last, the stand features a powder-coat finish for longevity.

Extremely Adaptable

The stand was engineered to be easily compatible with the Bosch REAXX, 4100 and GTS1031 table saws, and it is extremely adaptable. It includes adapter plates to accommodate competitor table saws, including DeWALT, Makita, Hitachi, Craftsman, Ridgid and more.

Product description

Leecraft model BH-2 fits 4100 & 4000 table saws. LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. Complete with instructions. Insert surface colors may vary.

• Installation instructions included
• Leecraft Model #BH-2
• Fits 4100/4000 series jobsite table saws 13-9/16" x 3-3/4" x 7/16" thick w/o riving knife slot
• Precision machined from melamine faced, high-density phenolic laminate

User questions & answers

Question:	The bh-2 does not fit my bosch 4100 - it seems to be too long. has anyone had this problem, and if so, how have you solved it
Answer:	The BH-2 that I purchased fits perfectly in my Bosch 4100. The tabs on one end slide in away from you first and then the end closest to you snaps in place. You may need to adjust the jacking screws for a perfect fit. I'm assuming that you've removed the riving knife first.
Question:	Can this insert also be used as a ZCI for a regular saw blade
Answer:	The short answer is yes. When you cut the blade slot in the insert, you are cutting it for whatever size blade you are using. You actually should have multiple inserts. one for each of the different sized blades you have.
Question:	will this fit a rigid table saw
Answer:	I believe it is specific to Bosch.
Question:	my freud 206 blades won't totally cut through this insert. it stalls 1/4 of the way up. new blade. new bosch 4100. any suggestions
Answer:	Even with the riving knife bottomed out, it will still make contact depending on the elevation you're attempting to achieve. I had this issue initially on a regular 10" blade since it would only rise about 1-1/2" above insert. I should have purchased the version with the slot for my application. Try raising/lowering the dado stack without the insert to see what impact the riving knife would have. Also clamp a sacrificial piece of wood on top of the insert when you're back to plunging further into the insert.

Product description

This Bosch TS1003 Left Side Support Extension increase the width of your table to 52-inches when used with the Bosch 4000 10-inch Worksite Table Saw.

• Table saw left-side support extension for Bosch 4000 10-inch worksite table saw
• Extends table additional 12-inches for working with wide and long-pieces; stores flush when not in use
• Aluminum construction; 5mm hex wrench and needle nose pliers needed for installation
• Includes 1 table extension; table saw not included
• 4.4-pounds; 1-year warranty

User questions & answers

Question:	Has anyone tried to mount this on a Porter Cable Job Site saw
Answer:	Thank you for your question. The TS1003 is designed for use with the Bosch 4000/4100 table saws only. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	How do you use it as a support if it is mounted lower than the table
Answer:	The mounting brackets attach to the bottom of the saw. The rods slide in the mounting brackets. Then, the rods attach to the bottom of the support - which makes the top edge of the support flush with the table top. It is somewhat adustable in height to make sure it is flush.
Question:	Will this work with Bosch GTS
Answer:	Thank you for your question. The TS1003 is designed for use with the Bosch 4000/4100 table saws only. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	will this work on a skil 3310 10" table saw
Answer:	One would have to modify the Skil table saw to accept the brackets that hold the extension in place. I wouldn't try it.

• If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
• The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
• To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.
• The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears branded items) are 3/4” x 3/8” with a 1/8” “T” slot (with slight variances from brand to brand) running the length on the bottom of the slot.
• The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.

Product description

Mamba Thin Kerf Laminate Flooring, Non-Ferrous, Plastic & PVC Contractor Series 10 and 12 Inch Saw Blades

• Carbide Tipped
• 5/8 Bore

Product features

MA10080 Carbide Tipped Thin Kerf Non-Ferrous, Plastic & PVC Mamba Contractor Series 10 Inch Dia x 80T, TCG, -6 Deg, 5/8 Bore Circular Saw Blade

Specifically designed for contractors. Non-Stick coating reduces friction which protects against rust and resin build-up, resulting in maximum performance. Carbide Tipped.

Mamba Saw Blade Features

- Laser cut plate, bore, expansion slots and stabilizer vents

- Thin kerf blades

- Electrostatic Non-Stick Coating

Excellent for:

- Aluminum, Brass, Copper and all other Non-Ferrous Metals

- Plastics

- Acrylic Sheets

- Coroplast

- Corrugated Polypropolyene

- Plastic Laminate Flooring

- Plexiglas

- Polycarbonate (Lexan)

- Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)

- Teflon

Carbide Tipped Saw Blades

The Industrial Carbide tipped Saw Blades are engineered for smooth cuts and extended blade life. Our saw blades feature copper plug technology to minimize noise and vibration during operation and large carbide teeth that can be sharpened several times. We offer an extensive line of quality general-use and application specific carbide-tipped saw blades to meet your industry or personal needs. These saw blades are used in factories, cabinet shops and by woodworkers.

About Amana Tool

For over 40 years Amana Tool is specializing in industrial quality solid carbide, insert carbide and carbide-tipped cutting tools for the woodworking, plastics, aluminum, composite and metal industry. We provide many solutions for manufacturers, fabricators, display and cabinet professionals as well as hobbyists. Amana Tool’s full line of industrial-quality cutting tools includes saw blades, router bits, shaper cutters, boring bits and much more.