14 best blade for table saws

Product description

"The Diablo 10in. 50 Tooth Combination Circular Saw Blade is ideal for ripping and crosscutting wood and wood composites, while leaving a smooth finish. This blade is the best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo's large gullet provides the chip removal space required while ripping, and the close grouping of teeth with the set provides the smaller bit size required when crosscutting. Features a super-thin laser cut kerf, Perma-SHIELD nonstick coating, tri-metal shock-resistant brazing and more. For use on miter saws and table saws. Arbor Knockout No, Arbor Size in. 5/8, Corrosion Resistant Yes, Teeth qty. 50, Blade Diameter in. 10, Blade Speed RPM 7,000, Blades qty. 1, Tip Type Carbide, Tooth Grind Combination, Anti Stick Rim Yes, Blade Use Wood, wood composite. Super-thin laser cut kerf for fast, durable and clean cuts TiCo hi-density carbide provides a controlled carbide wear that stays sharper longer Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body for longer life and a sharper cutting edge For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips. Model # D1050X Diameter 10" Machine Use Miter Saw, Table Saw Application Combination Teeth 50 ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15 Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time. The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping. Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF). Produces Smooth, Quiet Cuts with Laser-Cut Kerf The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time. An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life. Features Shock-Resistant Carbide for Long-Lasting Precision So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion. Fits Miter and Table Saws The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws. This product is covered by Freud's Limited Lifetime Warranty. What's in the Box Freud D1050X Diablo 10-Inch Combination Saw Blade. "

For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips.

Model # D1050X Diameter 10" Machine Use Miter Saw, Table Saw Application Combination Teeth 50 ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15°

Makes Clean, Razor-Sharp Cuts in Wood and Wood Composites

Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time.

The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF).

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1050X Diablo 10-Inch Combination Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the best choice for a table saw when one blade is needed for ripping and crosscutting.

• The product is 10x50T Diablo Blade
• Easy to use
• The product is manufactured in China
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Imported

User questions & answers

Question:	Are these really made in China
Answer:	From what I have read, the Diablo series is made in Italy but who knows what really goes on these days? I am happy with the blade and at the price it is a good value. Could they have been made in Italy at one time and then sourced/made in another country later on? I can't say.
Question:	Why are the vents just printed on
Answer:	The vents are actually through-cut, then filled with a rubbery material. They really do work. These blades are far quieter than the stock blades that come on most saws.
Question:	Would you recommend this blade for ripping finished hardwood? I am looking for a good blade for ripping cabinet fillers, etc
Answer:	It depends on what the cabinets are made out of. If they're solid wood, yes absolutely this blade will do great, it leaves almost sanded smooth edges if your saw is setup right. If its plywood, or particle board, or mdf, I'd use a diablo blade meant for that kind of wood like the freud d1090x 90 tooth blade, that will leave sanded smooth edges on a plywood board, and wont tear up your veneer like the 50 tooth blade might.
Question:	Would this blade cut a flat bottom dado
Answer:	No - The better version, if you want to make smooth multiple passes for a dado is the more expensive, Freud LU84R011 which has a flat bottom edge on the first tooth after each gullet.

Product description

Ideal for all cutting in softwood, hardwood, chip board, or plywood. Thin kerf for fast and smooth cutting action. Computer balanced plate reduces vibration for improved accuracy and better finish.

The DEWALT DW3106P5 saw blade combination pack contains a 10-inch DW3106 60-tooth fine-finish blade and a DW3103 32-tooth general purpose saw blade. Perfect for miter saw and slide miter saw jobs with softwood, hardwood, chipboard, and plywood, these slim-kerf blades offer quick and even incisions with minimum excess debris. A patent wedge shoulder places additional steel in back of every tip, maximizing strength and precision. Get the cutting action you need at the right price with this heavy-duty combination pack.

• Tougher tungsten carbide stays sharper longer
• Thin kerf for fast and smooth cutting action and The arbor size is 5/8”.
• Computer-balanced plate reduces vibration for improved accuracy and better finish
• Durable tungsten carbide maintains a true edge
• Best used for miter saw and slide miter saw jobs

User questions & answers

Question:	Does is work to cut laminate-flooring
Answer:	Hook Angle: 15 Degrees Teeth: 60 Grind Type: COMB Blade Type: Combination Diameter: 12-in Kerf: 0.118-in Arbor Size: 1-in
Question:	Can this blade be used on a Rigid cordless saw
Answer:	1"
Question:	Can I take this saw blade shaft (razor !) 1 3/16 not
Answer:	I can't speak on this blade in particular. But I run a lot of aluminum soffit/fascia and trim coil around windows and doors. Just about any sliding miter saw blade will cut aluminum just fine if you slide it backwards into the material to make the cut. Same goes for vinyl.
Question:	I need to cut both laminate flooring and wall paneling. will the blades do both and should i cut with the finished side up? signed: a lady woodworker
Answer:	The blade is thin and cuts very well at angles and straight. It is may favorite blade now.

Product description

The Diablo 10in. 24 Tooth Ripping Circular Saw Blade cuts rough framing lumber, high-quality finish lumber, plywood, OSB and hardwood siding with a smooth, fast and accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo's unique design, extra-tough steel plate and proprietary carbide tips deliver longer life and has a reputation for being a world class house framing tool. Ideal for general construction applications, including fast, efficient ripping and crosscutting. Blade Speed RPM 7,000, Arbor Knockout No, Arbor Size in. 5/8, Blade Diameter in. 10, Tip Type Carbide, Tooth Grind ATB, Blades qty. 1, Corrosion Resistant Yes, Engineered Venting Yes, Teeth qty. 24, Blade Use Framing w/wood, wood composites, Anti Stick Rim Yes. Super-thin laser cut kerf for fast, durable and clean cuts TiCo hi-density carbide provides a controlled carbide wear that stays sharper longer Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion Laser-cut stabilizer vents trap noise and vibration, and stabilizes the blade Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Laser-cut heat expansion slots allow blade to expand due to heat buildup, keeping the cut true and straight Hardened steel body for longer life and a sharper cutting edge For a fast-acting blade that produces clean rip-cuts in a variety of framing material, look no further than the Freud D1024X Diablo 10-Inch Ripping Saw Blade. Ideal for most general-construction applications, this is your go-to blade for slicing through rough framing lumber, high-quality finish lumber, plywood, OSB (oriented strand board), and hardboard siding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips. Makes Fast, Accurate Rips in Framing Lumber and More Achieving premium results when creating frames for houses and other building structures is all about clean, razor-sharp cuts. The Freud D1024X makes this process easy, fast, and precise. This blade features versatile capabilities and quick performance, making it ideal for general-construction jobs.Housing contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for ripping or crosscutting framing lumber. Appropriate application materials include plywood, OSB (oriented strand board), hardboard siding, and both rough and finish lumber. Produces Smooth, Quiet Cuts with Laser-Cut Kerf The Freud D1024X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 24 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time. An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction to the blade, helping extend its cutting life. Features Shock-Resistant Carbide for Long-Lasting Precision So you can count on it over the long term, the Freud D1024X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion. Fits Table Saws The Freud D1024X is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws. This product is covered by Freud's Limited Lifetime Warranty. What's in the Box Freud D1024X Diablo 10-Inch Ripping Saw Blade.

For a fast-acting blade that produces clean rip-cuts in a variety of framing material, look no further than the Freud D1024X Diablo 10-Inch Ripping Saw Blade. Ideal for most general-construction applications, this is your go-to blade for slicing through rough framing lumber, high-quality finish lumber, plywood, OSB (oriented strand board), and hardboard siding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Makes Fast, Accurate Rips in Framing Lumber and More

Achieving premium results when creating frames for houses and other building structures is all about clean, razor-sharp cuts. The Freud D1024X makes this process easy, fast, and precise. This blade features versatile capabilities and quick performance, making it ideal for general-construction jobs.

Housing contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for ripping or crosscutting framing lumber. Appropriate application materials include plywood, OSB (oriented strand board), hardboard siding, and both rough and finish lumber.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1024X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 24 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction to the blade, helping extend its cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1024X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Table Saws

The Freud D1024X is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1024X Diablo 10-Inch Ripping Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This blade is the top choice for contractors who want a smooth finish when ripping. Ideal for ripping oak, pine, pressure treated lumber and plywood.

• TiCo high-density Carbide for increased performance and maximum cutting life
• Perma-shield Non-Stick coating for protection against heat, gumming and corrosion
• Super-thin kerf design for fast and effortless cuts
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life, Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability, Laser cut arbor for accurate blade rotation reducing vibration and premature wear, Imported

User questions & answers

Question:	Looking for a 10"-3/8" circular saw (miter saw) to cut nail embeded pallet wood. don´t know which blade to choose. obviously, not for professional use
Answer:	Although probably not correct, I have cut nails and thin metal pipe, with carbide-tipped blades.
Question:	Good morning, can someone tell me with certainty, what's the origin for these ripping saw blades? (in which country are they manufactured). thank you
Answer:	Good Morning, possibly Hell hence the Brand name "Diablo"...oooh spooky huh?
Question:	Can i use this on a Ridgid portable table saw
Answer:	If your saw accepts 10 inch blades and has a 5/8" arbor, this blade is great for ripping lumber. Check the specifications for your particular saw model. You can also measure the arbor diameter on your saw. Specifications can be found online by searching for "Ridgid" + the model number.
Question:	I hope they mean 0.098" kerf
Answer:	Yes it is 0.098", 2.49mm in metric!
Question:	Can this blade be used for a table saw
Answer:	Yes, it is rated for 3450 rpm which is perfect for a table saw. With 80 teeth it would work best for very fine cuts.
Question:	Can this blade fit in dewalt dwe 7492 table saw
Answer:	If it is a 10" table saw then yes, i have it in mine it is a great blade
Question:	Being Tungsten Carbide tipped can these cut steel
Answer:	No

Product features

Enjoy your cutting travel with OVERPEAK

OVERPEAK is a powerful company foucs on diamond tool products. After years of hard work and accumulation, our company has developed into a Large standardization Enterprises integrating design, production and sales.

OVERPEAK is a gold supplier to global traders and consumers. The company produces more than 10 million circular saw blades every year. Over the years, we have exported our products to many countries and regions all the world and accumulated a large number of customers worldwide.

Business philosophy: "rigorous, focused, professional"

Designer Tom: Innovation to provide the next generation of circular saw blades is at the core of our survival

Quality control: OVERPEAK manages the production workshop and process strictly.Each pair of saw blade must undergo two strict quality checks, including surface finish and Wire fluidity after completion

Why choose OVERPEAK circular saw blades?

OVERPEAK high performance wood saw blade cuts wood like a hot knife through butter, smooth, fast and perfect.

Our saw blades help maximize cutting accuracy and productivity, so you enjoy a great job and be able to complete more tasks in less time.

Key Features:

• Sharp blades: OVERPEAK saw blades are made of harder tungsten carbide, 4 sided grinded blades cut wood like butter
• More durable than others: Our saw blades are made of harder tungsten carbide and have a cutting life 5 times longer than others, professional designed for durability
• Smooth cut: The cut it leaves is so smooth that you may think it has been sanded by 600 grit sandpaper
• No chipping: The blade can be cut straight and realistically, it won't chip in soft wood, and the cutting edge looks like someone has polished it.

What can a good circular saw blade do for you?

Just like the old saying goes: 'A workman must sharpen his tools if he is to do his work well'. A sharp and durable saw blade can improve your work efficiency. If you make a living by cutting wood, or if you do some home building and handmade work, then the first step in your enjoyable cutting journey is to buy a satisfied circular saw in your hand.

If your old blade has a variety of undesirable conditions: it starts to become dull, the blade rolls up, or the cut is not smooth, then it is time for you to start a new attempt. Complaining all day can not help anything, this is where the Overpeak comes in.

Sharp teeth

The unique cemented carbide teeth can pierce wood like butter, helping to improve cutting accuracy and working efficiency.

Durable material

The OVERPEAK blade is made of harder tungsten carbide, which has a cutting life 5 times longer than others. Even after several repeated cutting tests, it will not become dull and warp its blade.

Smooth cut surface

The blade can be cut straightly and realistically, and will never crack in soft wood. The smooth cut it leaves will make you think it has been sanded

Product description

Remember when you had a smooth cut with no tearout? The WEN 10-Inch Professional Fine-Finish Woodworking Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through woods of any kind, making easy work out of pine, oak, poplar, cherry, maple, walnut, and more. The 5/8-inch arbor allows for compatibility with the majority of 10-inch miter saws, jobsite saws, and table saws on the market. Heat expansion slots help the blade expand and contract as needed to provide maximum accuracy across a wide range of cutting conditions. Our unique protective coating fights off potential damage caused by heat, rust, corrosion, gumming, resin, and more. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 of an inch wide (2.4 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

• Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
• Perfect for slicing through both hard and softwoods of all kinds
• Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
• Designed with 60 carbide-tipped teeth for fine-finish wood cutting
• Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws

User questions & answers

Question:	Could this be used for a Craftman 10" radial arm saw
Answer:	I don’t see why it wouldn’t

Product description

Fine finish blades let trim crews get the most out of sliding or “chop” style Miter saws, as well as jobsite or workshop Table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, Pine, melamine, plywood, and Moulding. 1" Diameter, 6T ATB, 5/8" Arbor, 15 degree hook angle. Tico Hi-Density carbide specifically designed for each application to increase performance Parma-Shield Non-Stick coating protects from heat, gumming, & corrosion super thin laser cut kerf for fast, durable, and clean cuts tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body – warrants a longer life and sharper cutting edge. Ideal for: high quality crosscuts and rip cuts in wood, plywood & melamine suggested projects: trim, remodeling/demolition

For a clean-cutting blade that creates smooth finish cuts in material such as veneer plywood and delicate hardwood, look no further than the D1060X Diablo 10-Inch Fine-Finish Saw Blade. This is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. This blade's high tooth count minimizes grabbing of the workpiece, producing cuts that require little to no sanding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Makes Clean Finish Cuts in Wood and Delicate Molding

Achieving attractive results when working with fine finish material is all about clean, accurate cuts. The Freud D1060X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.

Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making smooth crosscuts in fine finish work. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1060X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 60 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1060X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws

The Freud D1060X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1060X Diablo 10-Inch Fine-Finish Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. Features Freud's TicoHi-Density Carbide , a Perma-Shield coating keeps this blade free from gumming and corrosion, Laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life, and tri-metal brazing. This particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.10" diameter, 60t ATB, 5/8" arbor, 15 Degree hook angle.

• TiCo Hi-Density carbide specifically designed for each application to increase performance
• Perma-SHIELD Non-stick Coating protects from heat, gumming, & corrosion
• Super thin laser cut kerf for fast, durable, and clean cuts
• Made in Italy

User questions & answers

Question:	I just want to one blade for my compound bevel miter saw would you recommend this? Thanks
Answer:	I have no complaints with the D12100x. I’m a trim carpenter and impressed with the blade. I’ve always had either 60 or 80 tooth blades and as long as they were sharp, I really couldn’t tell the difference in cuts.
Question:	Will this cut exotic wood tha tis 4" that is at the top of the Janka scale? Or would it be better to buy a higher tooth count? Thanks
Answer:	I can’t answer about this specific blade, but I have a Forrest table saw blade and it’s really worth the extra money. I use the Freud on my chop saw and am very happy with the performance. I probably wouldn’t go with Forrest for my chop saw unless the price was very close.
Question:	Is this American made
Answer:	The hook angle is 7 degrees. I wanted to know the correct answer and found it from manufacturer's product page: http://www.diablotools.com/products/product/D12100X
Question:	how thin is the actual cut kerf
Answer:	It is the standard 1/8" thickness.

Product description

Remember when you had a smooth cut with no tearout? The WEN 10-Inch Professional Woodworking Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through woods of any kind, making easy work out of pine, oak, poplar, cherry, maple, walnut, and more. The 5/8-inch arbor allows for compatibility with the majority of 10-inch miter saws, jobsite saws, and table saws on the market. Heat expansion slots help the blade expand and contract as needed to provide maximum accuracy across a wide range of cutting conditions. Our unique protective coating fights off potential damage caused by heat, rust, corrosion, gumming, resin, and more. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 of an inch wide (2.4 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

• Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
• Perfect for slicing through both hard and softwoods of all kinds
• Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
• Designed with 40 carbide-tipped teeth for general-purpose wood cutting
• Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws

Product description

8-1/4 in. Saw blades are ideal for ripping and cross-cutting applications. Patented body slots reduce vibration, which works with the blade's thin kerf design to deliver exceptional user feel. High-density tungsten carbide teeth are tough, wear-resistant, and provide long life. The reinforced shoulder is designed for strength and durability by providing impact resistance against nail-embedded wood. These blades come with tough coat Anti-stick coating to reduce friction and gumming and are optimized for use on both corded and cordless circular saws. See the chart below for available tooth count options that are right for your application.

• Made from high-density tungsten Carbide for toughness, wear-resistance, and long life
• Tough coat anti-stick coating reduces friction and gumming
• Thin kerf design for smooth cuts
• Reinforced shoulder for impact resistance in nail-embedded wood
• Optimized for use on both corded and cordless circular saws

User questions & answers

Question:	I´m from Uruguay, sorry for my english!, what can i do if my center is not 5/8?, my machine´s center ir 20mm
Answer:	I am not sure what 20MM is- but on most saws if your arbor is not 5/8" the diamond shaped " knock out" around the the 5/8 hole will come out and fit a matching diamond shape raised portion on your saw to lock in the blade. Not sure if that makes sense- if you had a picture of your saw, it could help.
Question:	Is this a flat tooth blade
Answer:	No, it is not a flat tooth blade.
Question:	Is this compatible with the riving knife included with the DWE
Answer:	probably. the riving knife should be the same. they are set up for the saw kerf. your manual should tell you what blades to use
Question:	Does dewalt sell an 8 - 1/4 "fine finishing" blade for the flexvolt 60 volt table saw
Answer:	Sorry I can not help I bought this for a circular saw not a table saw

Product description

This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3/4" thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.

Designed for serious woodworkers, the 10-inch Freud LM72R010 Heavy-Duty Rip Saw Blade features an ultra-tough Perma-SHIELD coating that reduces heat and friction. It delivers smooth, fast cuts through hard- and softwood. Thanks to a rigid blade body and 24 oversized, flat-top teeth with TiCo high-density carbide tips, this is one dependable, long-lasting blade. Plus, its well-balanced, anti-vibration design means there's no need to use stabilizers with it.

Professional-Grade Design for Accurate Glue Line Cuts

Offering fast, "glue line" precision cuts and an anti-kickback design, this heavy-duty rip saw blade handles tough industrial ripping tasks without requiring you to add any stabilizers to your setup. It's ideal for working with hard- or softwoods that are 3/4 to 2-3/4 inches thick, and it can be used in gang-rip operations. This versatile blade handles crosscuts with chipboard, plywood, or laminate, and can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.126 kerf.

The extra-large, flat teeth featured on this blade leave a smooth, splinter-free finish that eliminates the need for sanding and jointing. This large-tooth design also allows the blade to be safely sharpened more times, prolonging the life of the blade and saving you money. And the large gullets between these teeth ensure easy chip removal.

Well-Balanced, Anti-Vibration Design

This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.

High-Density Carbide for Maximum Cutting Performance

This heavy-duty rip saw blade's 24 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "ripping blend." This blend offers a mix of improved density, hardness, corrosion resistance, heat resistance, and impact resistance that's ideally matched to the demands of ripping large quantities of thick, hard wood.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--once again, saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup

Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing

An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box

Freud LM72R010 Heavy-Duty Rip Saw Blade with Perma-SHIELD--10-inch diameter, 5/8-inch arbor, 24-tooth design.

From the Manufacturer

This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut.These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3/4" thick. Freud's Tico Hi-Density Carbide, Non-Stick Perma-Shield Coating, Laser cut anti-vibration slots, Anti-kickback design, and Tri-Metal brazing.With this ultimate heavy duty ripping blade there is no need for a stabilizer.

• 10" Blade Diameter, 24 Teeth, FLAT Grind, 5/8" Arbor, .126" Kerf, 20° Hook Angle
• Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
• Extra Large, Flat Tooth Design leaves a smooth finish without the need for sanding or jointing
• Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
• Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

User questions & answers

Question:	Will this blade work in my g0524 straight line ripnsaw at 4500 rpm
Answer:	I thought it was self-subricated
Question:	What is the proper blade height for ripping
Answer:	Yes friend. Our 3018 Pro engraving machinebe can engraved plastic, wood, acrylic, pvc, pcb, wood or the like material.
Question:	Is it a flat top blade
Answer:	yes
Question:	Is this full kerf blade ok for using in a DeWalt contractor saw, or should I use a thin kerf
Answer:	There is more to this answer. I have the unit that will move the router in and out. The accuracy can degrade toward the edges. So a better questions is, "What is the maximum area this will engrave accurately?". The answer to that is. It depends. The magic is in the software control. You run a test pattern, and make measurements, that tell the program how to change everything, to maintain accuracy, even at the ends. You will want to calibrate this for parts that are going to cover the board. My frame is also setup for a full 4x8foot sheet. So, short answer is 4' x 8'.

Product description

Remember when you had a smooth cut with no tearout? The WEN 12-Inch Professional Fine-Finish Woodworking Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through woods of any kind, making easy work out of pine, oak, poplar, cherry, maple, walnut, and more. The 1-inch arbor allows for compatibility with the majority of 12-inch miter saws, jobsite saws, and table saws on the market. Heat expansion slots help the blade expand and contract as needed to provide maximum accuracy across a wide range of cutting conditions. Our unique protective coating fights off potential damage caused by heat, rust, corrosion, gumming, resin, and more. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 of an inch wide (2.6 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

• Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM
• Perfect for slicing through both hard and softwoods of all kinds
• Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts
• Designed with 80 carbide-tipped teeth for fine-finish wood cutting
• Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws

User questions & answers

Question:	Will this work with a dewalt dws
Answer:	I have a Dewalt 705 and works fine, as long as your arbor is the same

• ▲Material - OVERPEAK saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades
• ▲Low Noise & Cutting Stable - 6 Laser cut expansion slots and 4 Laser-cut stabilizer vents trap noise and vibration, keeping it cool and reducing blade warp
• ▲Alternate-Top Bevel Teeth - The 10 inch saw blade with unique tooth design provides straight cuts and cutting smoother
• ▲Machine Use - Framing saw blade is great for circular saw, table saw, miter saw. RPM up to 6000
• ▲General Usage - The Overpeak 10 inch carbide blade is 90 tooth and suitable for ripping wood, crosscuts wood, plywood, and laminate

User questions & answers

Question:	What is width on blade
Answer:	It should with appropriate jig.
Question:	Will this blade cut 3/4" double sided melamine sheets
Answer:	You can clamp/add additional pieces or support if you're doing edge-routing. also, be sure the keep the wider side of the base plate on the thickest part of the stock. I have not used them yet, but there was also a couple of edge guides provided that may help.
Question:	Can i use this to cut PVC trim
Answer:	YES IT DOES
Question:	Good to cut 2" styrofoam insulation with
Answer:	Works great with easel

Product features

Enjoy your cutting travel with OVERPEAK

OVERPEAK is a powerful company foucs on diamond tool products. After years of hard work and accumulation, our company has developed into a Large standardization Enterprises integrating design, production and sales.

OVERPEAK is a gold supplier to global traders and consumers. The company produces more than 10 million circular saw blades every year. Over the years, we have exported our products to many countries and regions all the world and accumulated a large number of customers worldwide.

Business philosophy: "rigorous, focused, professional"

Designer Tom: Innovation to provide the next generation of circular saw blades is at the core of our survival

Quality control: OVERPEAK manages the production workshop and process strictly.Each pair of saw blade must undergo two strict quality checks, including surface finish and Wire fluidity after completion

Why choose OVERPEAK circular saw blades?

OVERPEAK high performance wood saw blade cuts wood like a hot knife through butter, smooth, fast and perfect.

Our saw blades help maximize cutting accuracy and productivity, so you enjoy a great job and be able to complete more tasks in less time.

Key Features:

• Sharp blades: OVERPEAK saw blades are made of harder tungsten carbide, 4 sided grinded blades cut wood like butter
• More durable than others: Our saw blades are made of harder tungsten carbide and have a cutting life 5 times longer than others, professional designed for durability
• Smooth cut: The cut it leaves is so smooth that you may think it has been sanded by 600 grit sandpaper
• No chipping: The blade can be cut straight and realistically, it won't chip in soft wood, and the cutting edge looks like someone has polished it.

What can a good circular saw blade do for you?

Just like the old saying goes: 'A workman must sharpen his tools if he is to do his work well'. A sharp and durable saw blade can improve your work efficiency. If you make a living by cutting wood, or if you do some home building and handmade work, then the first step in your enjoyable cutting journey is to buy a satisfied circular saw in your hand.

If your old blade has a variety of undesirable conditions: it starts to become dull, the blade rolls up, or the cut is not smooth, then it is time for you to start a new attempt. Complaining all day can not help anything, this is where the Overpeak comes in.

Sharp teeth

The unique cemented carbide teeth can pierce wood like butter, helping to improve cutting accuracy and working efficiency.

Durable material

The OVERPEAK blade is made of harder tungsten carbide, which has a cutting life 5 times longer than others. Even after several repeated cutting tests, it will not become dull and warp its blade.

Smooth cut surface

The blade can be cut straightly and realistically, and will never crack in soft wood. The smooth cut it leaves will make you think it has been sanded

Product description

The DEWALT DW3106P5D0I Series 20 10-Inch 60T Fine Finish Saw Blade (2pk) is ideal for all cutting applications in softwood, hardwood, chip board or plywood using a table saw or miter saw. Professional quality thin kerf carbide saw blades produce a smooth finish with minimal material waste.

• Thin kerf for fast and smooth cutting action
• Computer balanced plate reduces vibration for improved accuracy and better finish
• Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy
• Includes:1Pack with 2 Blades.

User questions & answers

Question:	What is the kerf? My portable Dewalt table saw has a minimum or
Answer:	Plunge stroke is 2 11/64”.
Question:	Why is amazon charging $10 more than home depot?? what a joke so much for the savings you use to get through amazon
Answer:	110VAC
Question:	Does this universally? I have a 10 inch Hitachi miter saw? Thanks
Answer:	small
Question:	CAN THIS BLADE BE USED FOR
Answer:	Good router bits.

Product description

The product is 10" 40T Thin Kerf Blade. Easy to use. The product is manufactured in United States.

The DEWALT DW3114 Series 20 10-Inch 40 tooth ATB thin kerf saw blade with 5/8-inch arbor takes care of even the toughest jobs with ease. The thin kerf design ensures a smooth, fast cutting action, and DEWALT's computer-balanced plate reduces vibration for a more precise and accurate cut. This 40-tooth general purpose blade will handle hardwood, softwood, plywood, and molding with exceptional accuracy thanks to its exclusive wedge shoulder design that puts more steel behind each tip.

From the Manufacturer

SERIES 20 Construction Designed to deliver the cut quality, speed and durability to stand up to the toughest jobsite use. Thin-kerf fast, smooth cuts. Exclusive wedge shoulder for increased durability. Patented ribbed heat vents eliminate blade flexing and binding for long lasting performance. Designed for general purpose use. 10 inch 40 tooth ATB, with 5/8 inch arbor.

• The product is 10" 40T Thin Kerf Blade
• Easy to use
• The product is manufactured in United States
• Thin kerf for fast and smooth cutting action
• Computer balanced plate reduces vibration for improved accuracy and better finish
• Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy
• 10-inch diameter; 5/8-inch arbor; .095-inch kerf; .069-inch thickness
• Includes one 10-inch saw blade

User questions & answers

Question:	How many rpm is it recommended for
Answer:	Hello, dear friend, Thank you for your interest for our product,very sorry, it's used on wood, so it can not used on 3/4 plywood on edges, thank you for your understanding! Have a good day! Best Regards!
Question:	will it work with craftsman saws
Answer:	don't know It came with missing parts
Question:	Does this make a flat bottomed cut
Answer:	Yes this will cut but you have to cut slowly with it, if you do it too fast it could chip the laminate.
Question:	Will it work with skilsaw
Answer:	About 1.5hp. 10A x 110V = 1100W / 745= 1.4765.

Product description

Our general purpose and framing blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting of all types of hardwood, softwood, particle board and plywood. The aggressive hook angle and super thin kerf make for fast and easy cutting. Other features include an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cut.

From the Manufacturer

Our general purpose and framing blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting of all types of hardwood, softwood, particle board and plywood. The aggressive hook angle and super thin kerf make for fast and easy cutting. Other features include an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cut.

• Super Thin Kerf for Fast Cuts
• Professional Grade Carbide
• Heat Vents for Cooler Operation
• Anti-Kickback Tooth Design
• Expansion Slots to Prevent Warping

User questions & answers

Question:	Will this blade fit a Craftsman 8" miter saw
Answer:	Yes it can be used, but it will depend on what you will be using it for as to how well it will work for you. I use mine for cutting small box joints because it has flat and square 1/8" teeth. I also use it for ripping solid hardwoods, but I use it on a 3 hp table saw. A DeWalt saw has about 1/2 as much power, so using a thin kerf blade will remove less wood and require less power for the cut. For general cutting use, I think you will be better off using a good thin kerf combination blade. If trying to cut small box joints like I am, this blade will do a fine job on your saw. Again, you can use it, but it may not be your best choice. It will depend on what you will be cutting.
Question:	What is the kerf
Answer:	You would need to email the manufacture for that information.

Product features

Oshlun SBW-080024 8-Inch 24 Tooth ATB General Purpose and Framing Saw Blade with 5/8-Inch Arbor (Diamond Knockout)

Our general purpose and framing blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting of all types of hardwood, softwood, particle board and plywood. The aggressive hook angle and super thin kerf make for fast and easy cutting. Other features include an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cut.

• Real industry quality level with elegant and simple design, C4 construction grade tungsten carbide teeth provide maximum resistance for 3X longer life
• Ideal for ripping & crosscutiing in softwood, hardwood, chip board and plywood with fine finishing
• For use on Circular Saws, Miter Saws and Table Saws, Max RPM 7,000
• 2.0mm thin kerf design for fast cut and smooth cutting action allows extremely durable with minimal material waste
• Laser cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp

User questions & answers

Question:	Does this blade cleanly cut plastic
Answer:	I’d definitely use it if I needed to. I’ve cut it with a skill saw and worked great so don’t know why not.
Question:	Will this blade fot a model 5400 skilsaw
Answer:	If your saw accepts a 12" blade with a 1" arbor hole, it should fit. It is printed on the blade that there is a maximum RPM of 8000 RPM's. So you should be good to go at 4500 RPM's
Question:	what is the kerf
Answer:	On my Delta Unisaw, I typically set my blade so that the gullet's clear the top of the wood. It has worked well for me over the years. This allows the blade to get rid of some of the cut material so that it does not cause as much friction and heat the blade up dragging the wood chips/strands through the wood on the way back down. I find it leaves fewer burn marks on the wood if I need to slow down the feed when I reposition my hands on longer pieces of wood. Some people like to keep the blade lower as a safety precaution in case their hand wanders over it.
Question:	Is this a flat tooth blade
Answer:	Flat on top and sides also. Really cheap to have resharpened!

Product features

Specification - Diameter: 8-1/4"(210mm) - Teeth: 60-Tooth ATB - RPM: up to 7000 - Arbor: 5/8 Inch DMK