10 best tool with power switches
Tools with power switches are a common category of power tools and equipment used in various applications across the home improvement and construction industries. These power switches play a crucial role in controlling the operation of the tools, allowing users to start, stop, and regulate the tool's functionality. Here's what you should know about tools with power switches:
Functionality Control: Power switches on tools serve as the primary means of controlling the tool's operation. They allow users to turn the tool on or off, adjust speed settings (if applicable), and activate various features or functions depending on the tool's design.
Types of Power Switches:
- Toggle Switch: A simple on/off switch that can be flipped or toggled to start or stop the tool's operation.
- Variable Speed Dial: Some power tools, like drills or routers, have variable speed control knobs that function as power switches, allowing users to adjust the tool's speed.
- Trigger Switch: Common on handheld power tools, the trigger switch is a lever or button that is squeezed or pressed to activate the tool. Releasing the trigger stops the tool.
- Paddle Switch: Typically found on angle grinders, a paddle switch is a large, flat switch that can be pressed or released with the palm of the hand to control the tool.
Safety Features: Many power tools with power switches incorporate safety features to prevent accidental starts. These may include lockout switches, safety locks, or two-step activation processes to reduce the risk of injury.
Ergonomics: The placement and design of the power switch are often considered for ergonomic reasons. The switch should be easily accessible and comfortable to use during extended periods of tool operation.
Corded vs.Cordless Tools: Both corded and cordless power tools can have power switches. Cordless tools typically have a trigger-style switch for portability and convenience, while corded tools may have additional switches for locking the tool in the "on" position during continuous use.
Compatibility: Power switches on tools are designed to work with specific tool models and brands. It's essential to ensure that replacement switches or parts are compatible with your tool to maintain safe and proper functionality.
Maintenance: Power switches can wear out or become damaged over time due to heavy use. Regular maintenance and occasional replacement of switches may be necessary to keep the tool in working order.
Repair and Replacement: If a power switch on a tool fails or malfunctions, it may be possible to replace it with a compatible switch or seek professional repair services to restore the tool's functionality.
Tools with power switches are integral to various DIY and professional tasks, from woodworking and metalworking to construction and automotive repair. Proper use and care of these switches are essential for both safety and the effective operation of power tools.
Below you can find our editor's choice of the best tool with power switches on the market
Safety Power Tool Switch
Product description
No need to panic with our hands-free panic button. Just bump the "Stop Paddle" to quickly shut off power. Large, bright paddle is easy to find when you're in a tight spot. Locate it near your hip or knee and you'll never have to take your hands off the workpiece. Great for use with router tables or any workbench where you use a stationary power tool.
Includes 7 foot grounded cord to outlet and 2 foot female cord to power tool for quick plug-in and use. Mounts to Rockler steel shop stands or any other surface with screws. Heavy-duty 15 amp switch. Sturdy construction takes the hits and keeps on ticking.
- Heavy-duty 15 amp safety switch.
- 7 foot grounded cord to outlet.
- 2 foor female cord to power tool.
- Mounts with screws.
User questions & answers
| Question: | What are the dimensions as I have limited room |
| Answer: | I am running it on a 2 1/4 HP DeWalt router rated at 12 amps, no problems. I don't see any rating on the switch itself, HP or amps although the website says 15 amps which should square with your router's maximum draw. I know there are some really funny HP ratings on portable power tools. A table saw with a normal 2.5 HP motor would probably require 15 amps at 220 volts. I run my Unisaw on a dedicated 20 amp 220v circuit. Not much specific help on your question, but I think I would wing it! |
| Question: | Most switches declare for use with 1/2 horse power tools. what is the hp rating for this switch ? i am operating a freud ft2200 vce 3.25hp 15 amps |
| Answer: | It can be used on any tool with a 3 prong plug. |
| Question: | Could this be used on a band saw |
| Answer: | Whether or not, when you lose power to this switch, I would say ALWAYS hit the STOP button before restarting anything controlled by the switch. SAFETY first!!!!!. |
| Question: | if the power goes off does the switch reset or do you have to press the start button again |
| Answer: | The rockler website says 2.5”. I don’t own it but was looking for this info. Another question here indicates it works on a 2x4 so I guess they mean the narrow side... |
Automatic Vacuum Switch for Power Tools, Etoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Eliminating Circuit Breaker Tripping
Product description
Retaining the proven reliability of our Etoolcity technology, the automatic dust controller switch is the latest Version of the Etoolcity Vacuum Autoswitch-an essential device in workshops and on job sites for more than a decade.
THE NEW ETOOLCITY AUTOSWITCH FEATURES
★New Current Sensing Technology and Actuation Threshold
★Supports a Wide Range of Cutting Tools from Rotary Handheld Devices to Large Shop Saws
★Prevents Circuit Overload with an Auto Turn-On Vacuum Delay
★Runs the Vacuum Only While You’re Using Your Tool So You Save Time and Electricity
★Automatically Delays Vacuum Turn-Off by 7 Seconds to Continue to Clear the Air While the Motor Spins Down
★Helps to Comply with OSHA Requirements for Dust Control
Highlights of the Etoolcity Autoswitch:
▲STARTUP DELAY.Controls in-rush current to help avoid circuit overload
▲AUTO MODE.Turns the vacuum on automatically with the power tool
▲SHUTOFF DELAY.Allows time for the vacuum to clear the hose of debris
Focus On Your Work:
★Save time
★Minimize airborne dust Reduce
★Cleanup
Product guarantee: Full money back guarantee without reason, 2-year warranty and 24-hour support for customer service.
3 easy steps to install:
1: Plug the switch into wall
2: Plug vacuum into 'B' port outlet and switch on the vacuum
3: Plug tool into 'A' port outlet and use your tool as normal
ELECTRICAL SPECIFICATIONS Outlet Required:
1.Standard 120V/15A or 220V/10A,50/60Hz Outlet
2.Input Connection: 3prong(grounded)male
3.'A' Port Power Rating: 120V/15A or 220V/10A,50/60Hz
4.'B' Port Power Rating: 120V/15A or 220V/10A,50/60Hz
5.Actuation Threshold: ~0.25 Amps(about 30W at 120V)
Package Included:
●1x Automatic vacuum switch with 15'' power cord
●2x Mounting screws
●1x Installation instruction
●1x Strong nano-markless hook sticker
- Unique Current Sensing Technology. If the tool motor connected to the 'A' port exceeds 30W, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time
- Make the Work More Effective. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems
- Suitable for Most Medium Duty Workloads. Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum
- More Safety. Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W. The switch's shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work
- Two Installation Methods. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Both ways are very strong
User questions & answers
| Question: | What is the Warranty period |
| Answer: | 2 Years! |
| Question: | What do you do when you want to use thr vacumn stanalone to vac the floor |
| Answer: | You unplug the vacuum and plug it in to a regular outlet. If you want to do this frequently, you might consider one that has a switch, such as https://www.amazon.com/Automated-Vacuum-Switch/dp/B0035YGLZG/ref=cm_wl_huc_item |
| Question: | Will a palm sander kick the shop vac on? I am using a bosch 5" sander |
| Answer: | it should be no problem, it works with my 5" sander |
| Question: | can you plug it into multi outlet and then use for more than tool |
| Answer: | Hi, dear! You can plug a multi outlet into our vacuum switch 'A' outle, and then use for more than tool! But please note that the total power of our 'A' outlet cannot exceed 1800W. |
Table Saw Switch Replacement Compatible with Ryobi and Craftsman, Safety Power Tool Switch,Paddle On/Off Switch for Table Saw 120V/250V
- ✅ 【 TABLE SAW SWITCH】: The Paddle Switch for Table Saw,compatible with most Craftsman and Ryobi Table Saws. Note,it's not created or sold by Craftsman/Ryobi.
- ✅ 【VOLTAGE】: Emergency stop switch rated current: 20 Amps at 125V, 12 Amps at 250V.
- ✅ 【 FUNCTION】:Removalbe safety key to lock the switch prevents from accidental operations.Large paddle for emergency stop.
- ✅ 【 PREMIUM QUALITY】: This safety locking switch is made of high quality durable plastic.They are approved by UL, TUV, CSA, CE, ETL standards and they fit most of the power tools on the market.
User questions & answers
| Question: | Will this fit ryobi rts10g |
| Answer: | Yes. |
| Question: | Will this fit a ryobi bts |
| Answer: | If your old switch looks the same as the new one, it will fit |
| Question: | Will this work for an older craftsmen 10” part number 62442 Model number 11329805i |
| Answer: | From what I can tell, it doesn't look anything like the one on that Craftsman model. That does not mean you couldn't get it to work, you might have to do some modification to the mounting of it. |
| Question: | Will this work on a craftsman table saw model number |
| Answer: | Yes |
Copocn 120V/250V Table saw switch replaced with Ryobi and Craftsman compatible, Safety power tool switch, table saw paddle switch
- ✅ 【 TABLE SAW SWITCH】: The Replacement Paddle Switch for Table Saw,compatible with Ryobi Table Saws. Note,it's not created or sold by Ryobi.
- ✅ 【VOLTAGE】: Emergency stop switch replaces part #: 16102010G, 889110109712 ,452080007 , 984407003 and 984406001. Rated current: 20 Amps at 125V, 12 Amps at 250V.
- ✅ 【 FUNCTION 】 can remove the safety key lock switch, to prevent accidental operation. Large blades for emergency stop.
- ✅ 【 COMPATIBLE WITH】: Compatible with DP120 12" Drill Press, OSS500 Osclillating Spindle Sander,BTS16 10" Table Saw, RTS30 10" Portable Table Saw, RTS20 Portable Table Saw with Quick Stand, RTS10 10" Table Saw, BTS211 10" Table Saw, RTS21 10 in. Table Saw, RTS21G RTS21G 10-In. Table Saw
- ✅ 【 QUALITY】 : the safety lock switch is made of high quality and durable plastic. Certified to UL, TUV, CSA, CE, ETL standards, they are suitable for most power tools on the market.
i-Socket Workshop Automated Vacuum Switch - Power Tool Activated Sensor and Automatic Shutoff - Workshop Safety Device - for Contractors and Woodworkers
Product description
i-socket Workshop Automatic Dust Control Switch
Tired of safety feeling like a waste of time-I Want an easier, more efficient way to manage your shop that will protect you against harmful airborne debris?
Then look no further than the i-socket Workshop Automatic Dust Control Switch! Over 10 years of proven reliability, i-Socket by DGC Products is the gold-standard in workshop safety devices. The new Workshop i-Socket is an updated, improved design allowing you more flexibility and control than ever before.
Workshop Automatic Dust Control Switch Features & Benefits:
Technical Specs:
About DGC Products
. DGC launched the original i-Socket Autoswitch in 2006. Today, products based on i-Socket Technology can be found at a number of large retail hardware chains, woodworking and lumber supply chains throughout North America.
- ESSENTIAL: Auto on off & means less dust! i-Socket supports OSHA compliance, a safety and convenience must-have in the workshop or indoor jobsite.
- EFFICIENT: Saves time, minimizes hazardous airborne dust, reduces cleanup and noise so you can focus on your work.
- INTUITIVE: Using i-Socket is an easy 3 step process. With Workshop you just plug-in and get to work.
- NEW UPDATED DESIGN: i-Socket Workshop features two accessory outlets, a durable enclosed casing, Mode switch and LED safety indicators.
- FLEXIBILITY The Mode switch allows the Workshop to function in Auto and Manual Mode for when you want to control use of the vacuum and accessory.
User questions & answers
| Question: | When im using this with my bosch glide miter saw and harbor freight dust collector, its taking 2 to 3 seconds to get full power on the saw. Remedy |
| Answer: | You may be overloading the circuit depending on what you have plugged into the device. If you remove the device and just plug the saw and the dust collector directly into the same outlet, do you still have the same problem? If you do, then the circuit is not heavy enough to support both power tools. |
| Question: | Will this handle a harbor freight dust collector, its their 2hp unit and my Delta 36-725 table saw, thanks |
| Answer: | You have to be able to plug the dust collector and the table saw into this device. They both must be 110 volts. They both must not pull more than 15 amps. |
| Question: | Can I daisy chain multiple tools? I would only be using one tool at a time |
| Answer: | The unit has a Mfg power rating of 15amps. If you attach multiple tools using a single multi-outlet power strip with a 15amp internal breaker and then plug the strip into the i-Socket unit. Provided you only use one tool at a time, the auxiliary tool ( shop vac for example) will activate as each tool is powered on and off. |
| Question: | will this product work with a 6.5 peak hp shop vac |
| Answer: | Yes. Its really about the amperage. i-Socket Workshops are UL tested to 15a, we test the device to 20a. It really depends on the combined amperage needed by both your cutting tool plugged into the Tool outlet, the vacuum and any addition tool you may have plugged in to the Accessory outlets. Tools state their max or peak power draw but under normal use the tool seldom gets close to pulling the max. Say you had a miter saw 15a rated and your 6.5 HP 11a vacuum plugged in to a standard outlet on a 15a or 20a circuit. Does running the tools at the same time trip the breaker? likely not unless the saw was binding while cutting extremely dense material. The Workshop will not impact the outcome. Because motors pull a bit more power at startup, i-Socket technology slightly delays by milliseconds energizing the Accessory outlets after the cutting tool comes on to reduce the likelihood of tripping a circuit breaker . Thanks DGC Customer Service. |
O'skool Automatic Vacuum Switch Allows Power Tool to Turn Vacuum/Accessory on and Off Automatically
O'skool
Product description
Automatic turn on the vacuum when you start your tool , and delays 10 seconds to turn off the vacuum to clean the pipe when you complete your work. Saving time and electricity, reducing airboin toxin and noise that may lead the health problem.
Max. motor rating should not exceed 120V, 15A,60Hz, 1875W.
How to use
1.Connect the power of Automatic Vacuum Switch.
2.Insert the electrical tool to the socket labelled TOOL.
3.Insert the vacuum cleaner or work lamp to connect to the VAC socket.
4.The electrical appliance inserted in the VAC socket must be kept at the ON status.
5.When the electrical tool is switched on, the vacuum cleaner or electrical appliance connected to VAC will switch on immediately.
6.When the electrical appliance inserted in the TOOL socket is switched OFF, the electrical appliance connected to the VAC socket will continue to operate for 10 seconds and then stop.
Package Included:
●1x vacuum switch with 15'' power cord
●1x Installation instruction
- When turn on the tool connected to the "TOOL" port exceeds 30W, the vacuum connected to the "VAC" port will automatically delay 1 second to turn on, which prevents circuit overloaded by large current when tool and vacuum power-on at the same time.
- Automatic turn on the vacuum when you start your tool , and delays 10 seconds to turn off the vacuum to clean the pipe when you complete your work. Saving time and electricity, reducing airboin toxin and noise that may lead the health problem.
- Suitable for most medium duty workloads. Our automatic vacuum switch has a starting threshold of approximately 0.25 amps,perfectly suited for medium-sized work loads such as most Miter Saws,Table Saws,Power Sanders and Routers, and extend the life of your vacuum.
- Package Included: ●1x vacuum switch with 15'' power cord ●1x Installation instruction
- Pleasw note: The total current of all electrical appliances used with this device must not exceed 15A when operating, and the electrical cutting tool can only be used at the TOOL socket and cannot be used by inserting it in the VAC socket.
User questions & answers
| Question: | What if I just want to use the vacuum |
| Answer: | Just the vacuum, you don’t need the device. With the device the vacuum only works at the same time of other electric tool associated. |
| Question: | Vacs are 12a, some are 15a, so if you can't exceede a total of 15a, how do you use any tool with this? did you mean without the vac |
| Answer: | I run my 6" jet planer to a 3hp Harbor freight dust collector. And my 3 horse Delta Table saw. To same rig.. works fine. If that helps. I'm unsure of each units amperage draw without looking it up. Of course, not at same time. Hope that helps. |
| Question: | There are some reviews mentioning that there is no delay - is there a 1 second delay from tool power on to the vac power on |
| Answer: | There is a short delay and in my opinion I like my dust collector to fully be running so to achieve full dust collection capabilities. |
| Question: | Could i plug several tools into a power strip then plug the power strip into the tool outlet so that any of the tools would turn the vacuum on |
| Answer: | Delay to the dust collector. Power strip to the tool outlet. I dont see why not. It triggers on amperage draw. My only concern would be open piping to numerous tools would hamper airflow. But with enough gates to limit airflow to specific tools. I can't see why not. |
Table Saw Switch Compatible with Ryobi 089110109712, Replacement Parts Compatible with Ryobi 10 inch Table Saw, Power Tool Switch 120V/250V
Product description
A switch handles all on/off and variable speed functions.
They also have a role in electric breaking; they can momentarily reverse electrical polarity.
If your table saw is showing any of these symptoms; replacing the switch could solve your problem:
1) Saw won’t turn on when switch is activated
2) Saw dies intermittently
This part is compatible with the following machines:
Compatible with Ryobi
BS1001SV 10" Band Saw
BS902 9" Band Saw
BS903 9" Band Saw
BTS15 10" Table Saw
BTS20 10" Portable Table Saw
BTS20R 10" Table Saw
BTS20R-1 10" Table Saw
BTS21 10" Table Saw
DP120 12" Drill Press
OSS500 Osclillating Spindle Sander
BTS16 10" Table Saw
RTS30 10" Portable Table Saw
RTS20 Portable Table Saw with Quick Stand
RTS10 10" Table Saw
BTS211 10" Table Saw
RTS21 10 in. Table Saw
RTS21G RTS21G 10-In. Table Saw
- ✅ 【 TABLE SAW SWITCH】: The Replacement Paddle Switch for Table Saw,compatible with Ryobi Table Saws. Note,it's not created or sold by Ryobi.
- ✅ 【VOLTAGE】: Emergency stop switch replaces part #: 16102010G, 889110109712 ,452080007 , 984407003 and 984406001. Rated current: 20 Amps at 125V, 12 Amps at 250V.
- ✅ 【 PREMIUM QUALITY】: This safety locking switch is made of high quality durable plastic.They are approved by UL, TUV, CSA, CE, ETL standards and they fit most of the power tools on the market.
- ✅ 【 COMPATIBLE WITH】: Table saw switch is compatible with Ryobi BS1001SV 10" Band Saw, BS902 9" Band Saw, BS903 9" Band Saw,BTS15 10" Table Saw, BTS20 10" Portable Table Saw, BTS20R 10" Table Saw, BTS20R-1 10" Table Saw, BTS21 10" Table Saw
- ✅ 【 COMPATIBLE WITH】: Compatible with DP120 12" Drill Press, OSS500 Osclillating Spindle Sander,BTS16 10" Table Saw, RTS30 10" Portable Table Saw, RTS20 Portable Table Saw with Quick Stand, RTS10 10" Table Saw, BTS211 10" Table Saw, RTS21 10 in. Table Saw, RTS21G RTS21G 10-In. Table Saw
User questions & answers
| Question: | Does this switch short-out the motor when 'Stop' is pressed |
| Answer: | yes |
| Question: | Is there a circuit diagram for this switch? Which prongs are hot in/out |
| Answer: | Doesn't fit my homecraft delta 3/4 inch |
| Question: | Does this include the switch key |
| Answer: | not sure,remove the old switch and check the back |
[New Generation] Automatic Vacuum Switch for Power Tools, Etoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Eliminating Circuit Breaker Tripping
Product description
Retaining the proven reliability of our Etoolcity technology, the automatic dust controller switch is The Latest Version of the Etoolcity Vacuum Autoswitch - an essential device in workshops and on job sites for more than a decade.
Highlights of the New Generation Etoolcity Autoswitch:
▲Three Vacuum Run Modes
Auto Mode - Turns the vacuum on/off automatically with the power tool on/off
Off Mode - Always turn off the vacuum when you dont need vacuum on
On Mode - Always turn on the vacuum when you need to start vacuum manually
▲Adjustable Startup Delay
Controls in-rush current to help avoid circuit overload
▲Adjustable Shutoff Delay
Allows time for the vacuum to clear the hose of debris
▲Indicator LED
Red Led → Controller working state
Yellow Led → Tool outlet working state
Green Led → Vacuum outlet working state
▲New Components and Actuation Threshold
▲Helps to comply with OSHA requirements for dust control
Focus On Your Work:
★Save time
★Minimize airborne dust Reduce
★Cleanup
Product guarantee: Full money back guarantee without reason, 2-year warranty and 24-hour support for customer service.
3 Easy Steps to Install:
Step 1:
Plug the switch into wall
Step 2:
Plug vacuum into vacuum outlet and switch on the vacuum
Step 3:
Plug tool into tool outlet and use your tool as normal
Electrical Specifications Outlet Required:
●Standard 120V/15A or 220V/10A,50/60Hz Outlet
●Input Connection: 3prong(grounded)male
●Tool/Vacuum outlet Power Rating: 120V/15A or 220V/10A,50/60Hz
●Actuation Threshold: ~0.25 Amps (about 30W at 120V)
Package Included:
●1x Automatic vacuum switch with 15'' power cord
●2x Mounting screws
●1x Installation instruction
●1x Strong nano-markless hook
- New Generation. LED digital tube display; 3 vacuum run modes; Adjustable vacuum startup time and shutdown time in vacuum auto mode; Controller, tool and vacuum run Led indicator. All Our controller designs make your work more intelligent, convenient and safe
- Unique Current Sensing Technology. In vacuum auto mode, the vacuum will automatically delay turn on after the tools on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time; Vacuum will automatically delay turn off after the tools off, which reducing airborne toxin and work area noise that can lead many health problems
- Suitable for most medium duty workloads. Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum
- Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W. The switch's shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work
- Two Installation Methods. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Both ways are very strong
User questions & answers
| Question: | Will this work with LED lamps instead of the vacuum |
| Answer: | Yes, it will! |
| Question: | Is it UL- certified ? Thanks |
| Answer: | Yes! |
| Question: | What is max current for the vacuum port and the tool port? your spec says 15a for both, combined |
| Answer: | I would imagine it's 15A for both, given that the "feed" is terminated with a standard (US) 15A three-prong plug? I have mine connected to the largest shop-vac I could find, and a variety of power tools (large router, table saw, planer, etc.) and have had no problems. The programmable delays, particular on power-up, defend the thing against paired start-up surges, which probably helps. I've had it a few months so far, and it's way better than I'd imagined when purchasing it. |
| Question: | Will this work with a ridgid hd1402 (6.0-peak hp shop vacuum) and a dewalt dwe7941rs (15 amp table saw |
| Answer: | Yes, it should! |
DEWALT 20V MAX XR Angle Grinder, Trigger Switch, Power Detect Tool Technology Kit, 4-1/2-Inch to 5-Inch (DCG415W1)
DEWALT
Product description
This 20V MAX* XR small cordless angle grinder features POWERDETECT technology to maximize your performance with high-capacity XR batteries. The brushless motor delivers 1350 max watts out and up to 9000 RPM. This DEWALT cordless grinder is part of the PERFORM & PROTECT prdouct line with Kickback Brake and E-CLUTCH system.
- Power Detect tools maximize your performance with high-capacity XR batteries of the angle grinder
- DEWALT grinder has up to 40% more power**
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the metal grinder and shut the grinder off.
- E-Clutch System activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
- E-Switch Protection requires the trigger switch to be cycled (turned off and then on) in the event of a power outage or other unexpected shut down) to restart tool.
User questions & answers
| Question: | Does it come with a 5ah or 8ah battery |
| Answer: | The DCG415W1 includes (1)DCG415 20V MAX* XR® Brushless 4-1/2 - 5 in. Grinder With POWER DETECT™; (1) DCB208 20V MAX* Lithium Ion 8.0Ah Battery; (1) Charger; (1) 5 in. Type 27 Guard; (1) Side Handle; (1) Wrench; (1) Inner and Outer Flange; (1) Kit Bag |
| Question: | Can this grinder (dcg415) use 7/8" arbor wheels also? if you do not own it, if you don't know or if you are guessing please don't answer |
| Answer: | The arbor size is 5/8-in. There is not an adapter that has been tested by the manufacturer or recommended for use with this device for 7/8-in. |
| Question: | Is the dewalt dcg415 power detect grinder variable speed |
| Answer: | No, the DCG415 will feature an Electronic Soft Start. This feature limits the initial start up momentum, allowing the speed to build up gradually over a 1 second period. |
| Question: | will this work with the flex volt/60volt max batteries |
| Answer: | This model is compatible with Dewalt Flexvolt batteries. |
WEN WA0392 120V 15-Amp Momentary Power Foot Pedal Switch for Woodworking
WEN
Product description
Remember when you had hands-free operation for your favorite power tool? Put the pedal to the metal with the WEN Foot-Operated Power Switch. Simply press down on the pedal to start your machine, and lift up to stop. It’s that simple. Our straightforward design installs easily and is compatible with 120V machines up to 15 amps. This foot pedal switch also features a 6-foot power cord and a textured surface to prevent slipping during operation. Perfect for woodworking tools of all kinds, including scroll saws, sanders, wood lathes, rotary tools, drill presses, and more. And because its a WEN product, your foot switch comes backed by a two-year warranty and a friendly customer help line, all to make sure you remember WEN.
- Provides hands-free operation to any woodworking tool
- Press down on the foot pedal to start your machine and release to stop
- Installs easily with textured surface to prevent slipping during operation
- Handles 120 volt machines up to 15 amps in size
- The perfect companion for scroll saws, sanders, wood lathes, rotary tools, drill presses, and more
User questions & answers
| Question: | Is there a way to mount this switch to a piece of wood |
| Answer: | "Where there's a will, there's a way". While it is "possible", this switch is not designed for that purpose. One way (I may try this) requires removing the rubber feet, held in with 4 small screws, transferring the screw hole pattern to your piece of wood, drilling appropriately sized holes in the wood, finding screws of the appropriate length for the wood plus threaded mounting holes, perhaps dding nuts to more securely hold, (requires disassembling the switch) and finally assembling it. Other foot switches have tabs with holes, designed to easily allow mounting to another surface, such as XURUI Momentary Foot Switch XF-3, Single Pedal, 10A . |
| Question: | Does it work with the wen 56207 6.5-ton electric log splitter |
| Answer: | check the amperage/wattage of the log splitter. If it's no more than 15A/ 1800 W you're safe. If you don't have the splitter yet, my recommendation would be: don't use it - it's for indoor use anyway. |
| Question: | What material is it made out of |
| Answer: | The pedal is made out of steel |
| Question: | do you have to push again to turn off |
| Answer: | No, you step on the pedal and the machine turns on.....when you release your foot off the pedal the machine turns off. |
Latest Reviews
View all
Kelty Internal Frame Backpacks
- Updated: 06.06.2023
- Read reviews
Ramps For Dogs To Get Into Trucks
- Updated: 13.02.2023
- Read reviews
Skylink Alarm Systems
- Updated: 27.05.2023
- Read reviews
Indoor Cat Doors
- Updated: 15.04.2023
- Read reviews
Bottles With Loop Caps
- Updated: 30.05.2023
- Read reviews