10 best power tool saw accessories

Product description

The BORA 6-pc NGX Deluxe Set makes it faster and simpler to break down sheet material and rip boards with clean, accurate cuts every time.

• Includes: 50-inch NGX clamp edge, 50-inch NGX Extension with connectors, Saw Plate, 2 rolls of non-chip strip, 2 Track Clamps, T-Square Accessory
• Clamping end on straight edge moves with handle for easy adjustability from one side
• Locking handle grabs work surfaces for secure grip that won’t budge
• Includes 50” Clamp Edge and 50” extension for 100” cutting capacity
• Made of heavy-gauge, rigid aluminum for extreme durability
• Saw Plate features fixed center molded channel helps reduce blade offset and guesswork
• 2 rolls of 55" self-adhesive Non-Chip Strip reduces top edge tear-out for a smooth finish

Product features

6pc NGX Premier Set

The NGX Clamp Edge System 6-piece Set makes it faster and simpler to break down sheet material and rip boards with clean, accurate cuts every time.

Secure Hold

The NGX clamp edge features a locking handle that firmly grabs your work surface for a secure hold.

Any Angle

Track clamps tightly attach to the clamp edge with non-marring rubber grips so you are able to confidently cut any angle needed.

T-Square Accessory

The T-Square accessory attaches to the NGX Clamp Edge and helps you to stay square to your material, just like a table saw would.

Saw Plate and 2 Rolls of NCS

Pro saw plate and non-chip strips increase accuracy and reduce tear out. The non-chip strips are adhesive and each roll is 55 inches long.

50-inch Clamp Edge and 50-inch Extension

Here’s why PTIA likes the NGX Clamp Edge System so much:

“Track saws are gaining popularity thanks to the number of cuts they can replace a table saw on. That trend isn’t lost on the Bora Tool crew and their new NGX Clamp Edge Saw Guide helps transform your current circular saw into an accurate-cutting track. While this isn’t a brand new idea for Bora Tool, they’ve made this update their easiest to use so far. Easier use means you’re more likely to use it and finish with higher-quality results.”

T-Square Attachment

The NGX T-Square makes it simple to check if your edges are square without having to measure or move to the other side of your material. By replicating the way a table saw fence works, this accessory helps your NGX Clamp Edge stay square to your material, adding a new level of precision to your work.

Pair of Track Clamps

When used with the clamp edge, track clamps will allow you to make any angle you need, quickly and accurately. Track clamps are compatible with BORA NGX and WTX clamp edge models.

Product description

Have a second, additional tool mounted and ready to attach to your workstation right when you need it with the STEELMAN 67111 Additional Tool and Accessory Mount Bracket. Attaching with a simple clamping motion and featuring a powder-coated steel body and 6-inch support handles, this durable accessory is designed to securely mount onto your STEELMAN work stand or any dual tube workstation that uses 1.75-inch tube rails with a 3.5-inch space between them for a maximum width of 7-inches. Compatible with any miter saw or other tool with mounting dimensions of 14.75-inches or less when measured front to back, this mounting bracket includes all the hardware necessary to securely attach your tool as well as offset brackets for tools with offset mounting points.

• Steel frame - durable steel tool mount frame that won't buckle under the weight of mounted saws or other tools
• Wide compatibility - fits any miter saw or other tool with mounting dimensions of 14.75-inches or less front to back
• Included offset mounts - includes a pair of offset mounts for tools and saws with offset mounting points
• 6-inch support handles - 6-inch support handles make it easy to move and attach the mount to your workstation
• Compatible workstations - fits steelman and dual tube workstations with 1.75-inch diameter, 3.5-inch spaced tubes

User questions & answers

Question:	Will this fit a Iowa Manufacturing Stablemate saw stand
Answer:	The Protocol Stand has 1-3/4" tubes, 6-13/16" apart measuring from outside of tube to outside of tube.
Question:	Do the kit include the bolts, washers and nuts needed to fasten the saw to the item
Answer:	Mounting holes are elongated slots. You should be able to adjust to any miter saw.
Question:	What are the dimensions of this product? My miter saw stand has 1-3/4" rail tubes that are 8-3/4" apart
Answer:	They are 31/2 X 3 1/2 . Will fit 4 x4 post
Question:	Does it fit hitachi uu240f heavy-duty portable miter saw stand
Answer:	This is the only style we carry. Support boards can be attached on the horizontal beams much like you would construct a deck platform so you can attach them at as many intervals as you wish. For added rock solid stability and support we cross brace the vertical legs as well.

Product description

Ultimate fence and stop system for your table saw miter gauge and miter saw. With the included stop block, it's perfect for repetitive cuts.

• Will improve work support close to the saw blade.
• Works on the left side or right side of your saw.
• Adjustable aluminum fence increases the face of your miter gauge or saw.
• Built in extension bar to increase the stop capacity to 36".
• Stop block with knobs and bolts included.

User questions & answers

Question:	Will this fit a Fulton miter gauge
Answer:	I haven't had mine all too long but it seems very sturdy still flexible at 15 degrees Fahrenheit it doesn't seem as though it would tear easy I am very happy with it. Much better than others I have used
Question:	I'll try again. Why is there two different types of extensions shown
Answer:	I am using this cut into pieces from a main pvc pipe I would say it would have to be stretched to a full 20 but its quite flexible

Product description

Features:

The wedge-lock miter bars fit standard 3/4 Inch miter slots and T-bolts fit 3/8 Inch T-slot

Fit most table and band saws, router tables, and fences, split rail miter bar construction that provides maximum hold

Mounting Hardware Included for nearly any dual or tandem application, comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more

The featherboard are made from a high-tech polymer and each one has 13 angled fingers that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting

The featherboard works to keep workpiece press up against the fence whole time when you are cutting,giving a nice and clean cut on that edge. Make sure the Mortise and Tenons fit together.

The feather loc board for tablesaw can firmly fix the wood and prevent bounce, not only protects your hands, but also helps prevent recoil, restraint and bending of the blade.

Smooth curved lines and comfortable texture make your wood work more convenient and quicker.



Size:

Thickness: approx. 0.63" / 16mm

Width: approx. 6.49" / 165mm

Total length: approx. 8.26" / 210mm



Package includes:

2 x Feather Board

1 x Screw Set

1 x Slip Strip Set

• [4 Metal Miter] The wedge-lock miter bars fit standard 3/4 Inch miter slots and T-bolts fit 3/8 Inch T-slot. Fit most table and band saws, router tables, and fences, split rail miter bar construction that provides maximum hold
• [Wide Application] Mounting Hardware Included for nearly any dual or tandem application, comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more
• [Innovative Design] The featherboard are made from a high-tech polymer and each one has 13 angled fingers that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting
• [Quickly & Easily Connected] The featherboard works to keep workpiece press up against the fence whole time when you are cutting,giving a nice and clean cut on that edge. Make sure the Mortise and Tenons fit together.
• [Safe] : The feather loc board for tablesaw can firmly fix the wood and prevent bounce, not only protects your hands, but also helps prevent recoil, restraint and bending of the blade. Smooth curved lines and comfortable texture make your wood work more convenient and quicker.

Product description

This miter saw stand is a fantastic addition to Evolution’s product range. Perfectly complementing Evolution’s miter saws, as well as most other brands of miter saw. Setup and take down of the miter stand is quick and easy. This miter saw stand is both lightweight and robust. The stand weighs just 34lb and can support long workpieces, up to 118in, in length and can support up to 330lb. It is equipped with quick release mounting brackets for fast saw removal and height adjustable arms, with rollers and end stops. The folding legs and support arms that slide into the stand, allow for simple storage and transportation. Fits all Evolution Power Tool's Miter Saws, as well as most other brands of miter saws.

• Quick & easy set up: the folding legs, quick release mounting brackets and support arms that slide into the stand, allow for simple set up, storage and transport
• Sturdy & Robust: this miter saw stand can support long workpieces up to 118 inches in length and has a maximum work load of 330lbs
• Quick release brackets: quick release mounting brackets allow for fast miter saw removal
• Repeat cuts: height adjustable arms with rollers and end stops make quick work of repeat cuts
• Fits all Evolution power tool's miter saws, as well as most other brands of miter saws
• NOTE: Excludes Skilsaw 12 In. Worm Drive Dual Bevel Sliding Miter Saw

User questions & answers

Question:	Can extra quick release mounting brackets be purchased for evolution power tools evoms1 compact folding miter saw stand
Answer:	Yes, it will cut 1/2" square hardwood easily and very accurately.
Question:	My Bosch seems to tip back slightly. Its 10" sliding mitre. Do i just tighten the clamping strength as far as possible
Answer:	excellent for cutting dollhouse trim
Question:	Will a 10” makita miter saw fit
Answer:	No, it's only for cutting small things like wooden dowels, lots use it to make 300 blackout from .223 cases.
Question:	Would a 10" Delta mitre saw fit on this? It's an old saw, about 17 years old
Answer:	You are talking about a rifle round? Yes it will cut that, but if the shell case is tapered you may need to jig it or support the case by some method to get an accurate cut.

Product features

Quick & Easy Set-Up

Simply pull out the folded legs, mount your saw and you are ready to cut

Telescopic Arms

The extendable arms can support a workpiece up to 9.84ft long

Height Adjustable Rollers

Safely & securely adapts to your workpiece for precise, accurate cutting

Mounting Brackets

For saw attachment & removal, simply lift up or pull down the quick-release locking handles

End-Stops

Setting a stopping point for your workpiece is simple. Perfect for quick, repeat cutting

Lightweight & Portable

Weighing only 34lbs, it is easy to transport around site. All whilst not taking up much space

• ✅ This table saw switch is for Craftsman & Ryobi table saw
• ✅ Easy to install and give you a quick on/off and reversing
• ✅ Amperage: 12 Amps at 250V, 20 Amps at 125V.
• ✅ 2 position, 4 poles switch, with removable safety key for a quick power off
• ✅ This table saw switch is made of high quality durable plastic, solid to use.

User questions & answers

Question:	Will this fit a ryobi rts10g
Answer:	Yes you can replace the screen it is held on by Velcro. No you do not leave it out side...
Question:	Is the safety key included
Answer:	Yes I had projected both ways and In both resolutions in 4K and 1080 with great results
Question:	How many prongs does it have
Answer:	i'm using the GooDee Video Projector. It's fine. Especially for the money, around $60. I used it in conjunction with a fire stick - haven't tried Apple TV though.
Question:	Does this switch short-out the motor when 'Stop' is pressed
Answer:	No. One the screen is snapped onto the frame, the fold lines flatten out. The light from the projector hides these flaws anyhow.

Product description

Compatible with: DWE7490X Type 1, DWE7490X Type 2, DWE7491RS Type 1, DWE7491RS Type 2, DWE7499GD Type 1, DWE7499GD Type 2

• Genuine, OEM Dewalt Replacement Part
• Dewalt replacement miter gauge assembly, part number N272579
• Compatible with: DWE7490X Type 1, DWE7490X Type 2, DWE7491RS Type 1, DWE7491RS Type 2, DWE7499GD Type 1, DWE7499GD Type 2

User questions & answers

Question:	Will this bar fit a standard
Answer:	This outdoor movie screen comes with thin ropes and stakes so you can secure it. As long as you have it securely tied down and don’t have front facing wind, place the side into the wind will be ok. We had it up with 20 mile hr wind and had no issues. We are very happy with this screen. Hope that helps.
Question:	What size slot does this fit? 5/8 or
Answer:	It would depend on you projector

Product description

Table saw brake cartridge for 10" Blades. Compatible with all standard 10 in. blades. Compatible with all woods and other non-conductive materials.

From the Manufacturer

Standard cartridges for 10″ blades

• Compatible with SawStop saws that currently receive transparent BLUE cartridges.
• Compatible with all standard 10-inch blades
• Compatible with all woods and other non-conductive materials
• Designed for quick replacement when activated
• Revolutionary SawStop protection

User questions & answers

Question:	Will this work on a shopsmith
Answer:	Yes it can. You will want to use a teflon coated microfiber roller. We sell a roller kit for this product (ASIN B00THGS532) that is the ideal roller to use.
Question:	Will it work with deealt DW
Answer:	Yes, having the surface being primed will not cause any issues with this product.
Question:	Will this work on a jss-120a60 job site saw pro
Answer:	No it does not, the level 5 will actually make a brighter image than the level 2 with the same projector due to it's higher gain.
Question:	can there be paint on the saw blade
Answer:	You have to pair whatever Bluetooth device you want to use.

Product features

SawStop Standard Brake Cartridge

The Standard Brake Cartridge stops the spinning blade on contact with skin reducing the chances of a catastrophic injury. It is compatible with all standard 10" blades on SawStop saws. The locking key allows the user to quickly and easily switch between the Standard Brake Cartridge and Dado Brake Cartridge when making standard or dado cuts.

The Risk

According to the Consumer Products Safety Commission, there is a table saw injury every 9 minutes, and 10 amputations every day in the United States. Even the most safety-conscious woodworkers are at risk of an accident. And when that accident happens, the consequences are life-changing: extreme pain and trauma, loss of income-earning abilities, and loss of the ability to pursue hobbies. It's time to protect yourself. SawStop saws have saved thousands of fingers.

Microprocessor

The lightning fast microprocessor is always sensing for a drop in the voltage coming from the blade. It activates the safety system within 5 milliseconds once it detects contact with skin.

RS232 Port

The RS232 port plugs the brake cartridge into the saw sending the signal to the blade. It is the interface between the microprocessor and the saw.

Debris Shield

The mylar debris shield insulates the aluminum brake from metal particles. It helps avoid triggering an activation when cutting through nails, staples or screws.

Heavy-Duty Spring

As soon as that microprocessor senses the drop in voltage, it sends a surge of electricity through a fuse wire that holds the spring in place. The heavy-duty spring is held under 150 pounds of pressure, and it pushes the aluminum block into the path of the blade stopping it within 5 milliseconds.

Detect

The blade carries a small electrical signal.

When skin contacts the blade, the signal changes because the human body is conductive.

The change to the signal activates the safety system.

Stop

An aluminum brake springs into the path of the blade.

The blade comes to a complete stop and power to the motor is shut off.

Drop

After the blade comes to a stop, the blade's angular momentum drives it beneath the table, removing the risk of subsequent contact.

All of this happens in less than 5 milliseconds.

Reset

Resetting the saw yourself is easy. Simply inspect the blade for damage and replace the brake cartridge, and your saw is operational.

This entire process takes 90 seconds and you're back to work.

• Aligning your workshop machinery can be very frustrating. Sometimes a tape measure, ruler and a firm fist bump just won’t cut it. If you desire to have your machinery working at optimal levels then look no further than the A-LINE-IT DELUXE Machinery and Tool Alignment System. Get the precision you want out of your machinery without having to break the bank. After all, much like a car, your machinery is an investment that needs to be tuned up and maintained.
• One of the most common machines that need to be aligned and maintained is our table saws. As we use them, the fence and saw blade amongst other parts tend to slightly shift over time. The A-LINE-IT DELUXE has all the necessary pieces to the puzzle to help you identify what needs to be addressed in order to get your table saw in tip top shape again. You can easily identify, saw blade straightness, fence run-out, arbor run-out and flange run-out.
• One of the reasons you’ll appreciate this system is the self-adjusting “Smart Bar” that will stay tight in a miter slot that isn’t the same size along it’s slot length. You only need to adjust the spring plungers once, and after that, its a perfect fit in the miter slot. This makes the measuring process much more efficient since you don’t need to keep shimming or adjusting the miter bar for a snug fit.
• Another thing you will appreciate is that with the A-LINE-IT DELUXE, you get everything you’ll need to thoroughly check your machines in one package. The spring and nut assembly, as an example, makes the A-LINE-IT DELUXE the only tool in the US that will allow you to determine whether the run-out in the saw blade is caused by the blade, the arbor, or a combination of both. Being able to determine this is vitally important to achieve the best running table saw possible.
• The A-LINE-IT DELUXE includes the following: Dial Indicator in .001” increments, 22 assorted and interchangeable dial indicator tips, 11” long bar with 12 adjustment holes, smart miter bar with spring loaded adjustable plungers, threaded 1/2” diameter steel drill press chuck pin, the exclusive arbor nut run-out kit, planer bar (for checking run-out on planers with knife style cutter heads) and detailed instructions.

User questions & answers

Question:	Can I easily replace the dial test gauge with one of better quality
Answer:	The safety key is included.
Question:	Can someone please tell me the deminsions of the bars (LxWxH
Answer:	It has 4 terminals (prongs)
Question:	Can this be used to find the center of a rod/tube
Answer:	it works like the original switch
Question:	where is this made
Answer:	theater paint has silver in it to make it several orders brighter than white wall paint.

Product description

A switch handles all on/off and variable speed functions.

They also have a role in electric breaking; they can momentarily reverse electrical polarity.



If your table saw is showing any of these symptoms; replacing the switch could solve your problem:

1) Saw won’t turn on when switch is activated

2) Saw dies intermittently



This part is compatible with the following machines:



Compatible with Ryobi

BS1001SV 10" Band Saw

BS902 9" Band Saw

BS903 9" Band Saw

BTS15 10" Table Saw

BTS20 10" Portable Table Saw

BTS20R 10" Table Saw

BTS20R-1 10" Table Saw

BTS21 10" Table Saw

DP120 12" Drill Press

OSS500 Osclillating Spindle Sander

BTS16 10" Table Saw

RTS30 10" Portable Table Saw

RTS20 Portable Table Saw with Quick Stand

RTS10 10" Table Saw

BTS211 10" Table Saw

RTS21 10 in. Table Saw

RTS21G RTS21G 10-In. Table Saw

• ✅ 【 TABLE SAW SWITCH】: The Replacement Paddle Switch for Table Saw,compatible with Ryobi Table Saws. Note,it's not created or sold by Ryobi.
• ✅ 【VOLTAGE】: Emergency stop switch replaces part #: 16102010G, 889110109712 ,452080007 , 984407003 and 984406001. Rated current: 20 Amps at 125V, 12 Amps at 250V.
• ✅ 【 PREMIUM QUALITY】: This safety locking switch is made of high quality durable plastic.They are approved by UL, TUV, CSA, CE, ETL standards and they fit most of the power tools on the market.
• ✅ 【 COMPATIBLE WITH】: Table saw switch is compatible with Ryobi BS1001SV 10" Band Saw, BS902 9" Band Saw, BS903 9" Band Saw,BTS15 10" Table Saw, BTS20 10" Portable Table Saw, BTS20R 10" Table Saw, BTS20R-1 10" Table Saw, BTS21 10" Table Saw
• ✅ 【 COMPATIBLE WITH】: Compatible with DP120 12" Drill Press, OSS500 Osclillating Spindle Sander,BTS16 10" Table Saw, RTS30 10" Portable Table Saw, RTS20 Portable Table Saw with Quick Stand, RTS10 10" Table Saw, BTS211 10" Table Saw, RTS21 10 in. Table Saw, RTS21G RTS21G 10-In. Table Saw

User questions & answers

Question:	Does this switch short-out the motor when 'Stop' is pressed
Answer:	yes
Question:	Is there a circuit diagram for this switch? Which prongs are hot in/out
Answer:	Doesn't fit my homecraft delta 3/4 inch
Question:	Does this include the switch key
Answer:	not sure,remove the old switch and check the back