9 best portable bandsaw mill

Product description

CARMYRA MADE PORTABLE CHAINSAW MILL 36"

SUITABLE FOR CHAINSAW BAR 14INCH TO 36INCH

HIGH QUALITY,30 DAYS MONEY BACK WARRANTY

Fast & Easy Installation 7.5KGS Portable ChainSaw Mill



NOTE: The chainsaw and guide bar are not included

Fits: Chain saw with bar length from 14" to 36"

Material: Aluminum & Steel

Include: 1PC Chainsaw Mill + 1SET assembling Tool + 1PC USER MANUAL

Efficient & Versatile 36”Mill

Cuts lumber planks Height & Width Adjustable

Attaches directly to your chainsaw bar

• High Quality Steel and Aluminum Construction
• Cut Cedar, Walnut and Oak into High Quality Lumber
• High-Quality Mill Cuts Beams or Lumber from 0.5“ ”To 13“ Thick and 36” Wide
• Attaches to saw without drilling bar
• Lower price

User questions & answers

Question:	Can it cut 1in thickness
Answer:	Yes. That is what this does. You just need to cut once with another flat guide attached to the log (a board or 2x4 will work in place of the more expensive rails, just don't cut your screws) and then adjust the depth to desired thickness and follow the flat cut for all later cuts.
Question:	Simple question: Where is this made
Answer:	I worked in the "Pulpwood" business for several years. Pine is a very soft wood and you shouldn't have any problems milling it as long as you have a good chainsaw and keep it sharp.
Question:	I will be cutting wood slabs off tree's that are down will this work for that
Answer:	At the top the tool is about 10 inches, but I wouldn't attempt anything more than7-8 inches in diameter max. As far as being able to cut a slab with this device, maybe a 4 inch teeny weeny slab. Carter makes a device called the Accurate Log Mill, that you can purchase on this this site, that you might consider for cutting planks up to about 24 inches, or so.
Question:	Im new to milling so go easy on me. Is there a problem milling pine with this unit
Answer:	I use 12 ft 2x4’s

Product description

14 Inch - 36 Inch Saw Mill Portable Chain Sawmill Attachment Planking Milling Cutting Guide Bar Fits for Chainsaw Bars up to 14"-36" 36" x 12. 5" x 18" Mill machine 14" - 36" chainsaw bar 36" in width of lumber (log diameter 36") 1/2"-12" in thickness of planks of lumber Mount to chain bar with some turns of a wrench, suggest you to have a mill the same length as the chain saw bar Application: log milling attachment to cut lumber, provides a flat surface for the mill to ride on to get flat, even cuts Just attach this lightweight, portable sawmill with adjustable side bracket to your chainsaw and you're ready for the big or small jobs, cutting any log length How to use: Clamps onto the chainsaw bar with no drilling required; Tighten pressure bolts on to chain bar, adjust as you need; Features: Lightweight and portable, enables user to mill lumber where the tree falls No previous experience required, can be used very easily Ideal for making slabs, planks and beams Perfect for homeowners, woodworkers, arborists and sawyers

• Portable Sawmill Size: 36 x 12. 5 x 18 inch / 91. 4 x 31. 7 x 45. 7 CM
• Saw mill fits 14"-36" in length 36 inch in width Chainsaw Bars, NOT include Chainsaw
• This portable used to mill logs, works for 36" Diameter logs, adjustable thicknesses from 1/2" To 12"
• Constructed of durable aircraft aluminum and Stainless Steel to withstand heavy use and wear
• Works as log milling Attachment to cut lumber, lightweight and portable, MA tool, perfect for builders, woodworkers, & outdoor enthusiasts

User questions & answers

Question:	Where is this made
Answer:	Yes. After a thorough cleaning of the coop, I used it in the nest boxes, sprayed the entire coop, and sprayed the birds themselves. Then all new bedding was put in the coop and boxes. I sprayed that new bedding. I did not spray it around or on eggs, did not need to. Since cleaning and spraying, we have seen no red mites. I now use the spray in the coop a few times a month as preventative.
Question:	What is the smallest diameter. Log it will cut
Answer:	No. There is another spray for mosquitos that you can purchase that is safe for poultry. Vets Best is a good brand.
Question:	Is there any reason this couldn't be used with more than a 20 inch bar
Answer:	Yes
Question:	Does it come with rail guid
Answer:	I can only say what i know and use the liquid regularly but havnt used the powder. I suppose its the same but im not sure! I just go by the exp. Date and keep it in the temprature it should be in and have had no problems, let me tell you if you are planning on going into mass production an item like this is great (only from my experiences) i had lost 25 chicks out of 50 my first time around using other methods, but iv used this one a few times now and lost 0 chicks every time, so powder or liquid be prepared, and also prevent, keep the dirt or saw dust you use dry, dont put non stationary waterbowls in. They love to kick them aroung and that moistness plus urine and poo can really cause illnesses! Its important to keep every thing dry and loose and let the sun hit there cages at least an hour or two a day, they will like to baith in the sun and it will kill most of the bacteria that causes these illnesses, im no expert, just learned from experience! Hope i helped just a little

Product features

Chain Planking Milling

This rail chainsaws mill is used together with chainsaw cut boards from 1/2" to 13" thick.

Aluminum & Galvanized Steel

Featuring high quality aluminum and galvanized steel construction, these new brackets are more accurate, easier to adjust, create less vibration than the old die cast version and are virtually unbreakable.

14” to 36” Bar Length

Capable of handling chainsaws with bar sizes from 14" to 36" allowing a wide range of board sizes.

Height Adjustable

Chain planking milling height can be adjusted to fit the chain saw.

Easy To install

The package kit includes all necessary assembly and installation hardware. It is easy for you to install instantly.

For Various use

Cut cedar, walnut and oak into high quality lumber and converts rough logs into beautiful slabs. Ideal for homeowners, woodworkers, & carpenters, you can mill your own lumber at home or in the woods.

14” to 36” Chainsaw Mill

This 36" chainsaw mill are used together for log wood chip cutting. The versatile, heavy-duty chainsaw lumber mill suits up to a 36" (90cm) bar and accurately cuts planks and beams up to 1/2” to 13” deep. The chainsaw mill can be in combination with the saw mill, creates a straight and level first cut along a log. A perfect for homeowners, woodworkers, arborists and sawyers.

Product description

The EZ Rail System - in combination with the Alaskan saw mill - creates a straight and level first cut along a log. Connector kit #11882, sold separately, connects any combination of 9ft. or 5ft. guide systems together. Rail Material: Aircraft grade aluminum, Works With: Alaskan saw mill, Dimensions L x W x H (in.): 60 x 4 x 6, Application: Mill guide, Rails (in.): 60

• Includes rails and crossbar kits with leveling screws and log dogs

User questions & answers

Question:	Section of an extension ladder works well
Answer:	1.125 sq extruded .124/.1875 wall. Very stable.
Question:	I have a Stihl chainsaw with an 18" bar. Will this fit my saw
Answer:	36” but you need a 42” bar on your saw. Subtract 6” roughly from total bar length.
Question:	what is the thickness of the aluminum
Answer:	Yes, no problem. The jig will install to any chainsaw.
Question:	What is the greatest with this is capable of cutting I am looking to do wide slabs
Answer:	In terms of guide points, Alaskan jigs work something like a band saw and this is like a jigsaw. I have an Alaskan and it cuts 24 inch widths flat within 1/4 inch.

Product description

The DEWALT DCS374B 20v Max XR Deep Cut Band Saw features a 5'' cut capacity to cut strut, pipe, angle iron, pipe and various other materials. Cuts up to 4" SCH 40 pipe and double strut. This band saw has an LED Work Light with a 20 second delay that illuminates dark work surfaces for accurate cutting, and offers variable speed trigger and dial allow for versatility and control. The DEWALT Deep Cut Band Saw is capable of up to 149 cuts of 1-5/8" Strut with 14 TPI blade. There is an integrated hang hook which allows user to hang the saw without damaging the front handle or base, and the tool-less blade changing lever loosens blade tension for easy blade changes. This is a bare tool item - battery sold separately.

• 5'' cutting capacity
• LED Work Light with a 20 second delay
• Variable speed trigger and dial allow for versatility and control
• Integrated hanging hook
• Battery sold separately
• Battery & Charger Sold Separately

User questions & answers

Question:	Does it come with a battery
Answer:	I have a 6.0 AH 60v battery and it does fit. it's pretty big though. it is so tall that you can't use the handle to hold the saw with 2 hands. I dont know if the 9.0 AH or the 12.0 AH would fit or not since i do not have them but i would still recommend a smaller 20v battery since they weigh less and the tool is already sorta heavy.
Question:	does the trigger lock
Answer:	I would say it could and would it cuts thru unistrut and all-thread like butter, but if u don't have a fine too the blade like the (24TPI) (teeth per inch) then it might leave some burs on the wood but bone I know it will cut clean I've already used it for a deer antler to.make my dad a knife. As well like I said the bandsaw comes with a 14/18 tpi blade, might want to consider getting the finer tooth blade when u buy the saw, just a recommendation!
Question:	Does this cut stainless steel rods
Answer:	I recommend this tools is great
Question:	would this be useful for cutting wood? i'm looking to invest on either a stationary band saw or portable. i already have the dewalt 20v batteries
Answer:	We offer many different storage options with our TSTAK® and TOUGHSYSTEM®: https://www.dewalt.com/products/gear-and-equipment/tool-storage

Product description

Make your own small projects lumber from the dried wood you have on hand.

• CNC milled durable MDF table and adjustable miter bar
• Rigid steel fence with indexing material clamp
• Easy to assemble with complete hardware kit
• No saw modifications, installs and dismantles in minutes
• Supports heavy material up to 20" long and 8" wide

User questions & answers

Question:	What are the practical maximum log dimensions: diameter by length
Answer:	First off, it depends on the throat size of your band saw. I have a Rikon with a 14" throat, and I have pushed logs through the saw up to about 10". (Using the Carter Log Mill.) Secondly, it depends on the type of wood you may be milling and therefore the weight and density of the wood. Heavier woods will be more awkward to handle and one might wish to use a smaller size. Overall, set up properly and used in accordance with "Common sense" this mill works well for short pieces, up to 20" long or so.
Question:	Will this fit a porter-cable 13.625-in model # pcb330bs band saw
Answer:	Yes,it can cut 1in thickness,thanks
Question:	Max diameter of log you can fit on to use
Answer:	this is made in China.thanks

Product description

LOGOSOL is a Swedish based international company developing unique machines for wood processing and woodworking. With innovative and affordable solutions, we have visibly changed forestry and woodworking for more than 30 years. LOGOSOL products are known for simplicity of design, reliability, and efficiency. Cut your own logs quickly and accurately with the LOGOSOL Timberjig! With a few short steps, this equipment turns a standard chainsaw into a complete sawmill. Cut logs into finished planks or boards with unrivaled precision. With the height setting’s clear scales, this timberjig facilitates sawing and gives your timber accurate dimensions time and time again.

• SAWMILL - This portable Timberjig works as a sawmill, turning a standard chainsaw into a complete sawmill. Safe and convenient log sawing, cut logs into finished planks and boards in no time.
• FREEDOM TO CUT - Have timber that you want to cut but don’t have the space? This timber log accessory gives you great freedom to cut timber where and when you want.
• PRECISION - With stable rail holders made of steel, set up to 90-degree angles in four exact positions. Comes with a guide rail constructed from aluminum that gives you high precision while cutting.
• FITS MOST CHAINSAWS - If you already own a chainsaw with two guide bar bolts, this accessory can be easily attached and ready for use.
• EASY TO USE - Once you start using this big mill portable timberjig, you will notice the difference. It is easy to use and you start seeing results the first time using, with great accuracy.

User questions & answers

Question:	Will it fit a stihl ms
Answer:	Thank you for your interest in this product. This medicine cabinet is reversible, so that the door can open in either direction(from left to right, or from right to left). It is also a surface or recess mount cabinet; mounting hardware is not included. For appropriate mounting hardware information, please call the manufacturer's Customer Service Department at 800-892-3986.
Question:	will it fit stihl
Answer:	First, you need to define what you mean by “deep”. For me this is the distance from the frame that will sit against the wall and the back of the unit. In other word, how “deep” will it protrude into the wall. This is the essential question for someone replacing a unit of an old house who needs to know how “deep” the rough opening needs to be. The answer is just shy of 3” (2 15/16”), so you should be good if you have an opening with a 3” depth. I don’t know why manufactures can’t be clear about these critical dimensions.
Question:	will my stihl 260 work with this mill
Answer:	I dont know the concentration but i have been using this product for years in the winter time when my girls cant get in their dirt bath as much as they usually do in the warm weather. This works well and has a very pleasant scent. Its like cloves and rosemary. You dont need much of this spray per application.

Product description

The Alaskan small log chain saw milling attachment is perfect for the woodworker, homeowner or carpenter. Compact, lightweight design bolts directly to the chain saw's bar without any drilling required. Handles up to (in.): 1/2-13 Thick, 17 wide, application: log milling attachment to cut lumber, works with: chainsaw up to 20 in. Bar.

From the Manufacturer

Granberg Chain Saw Mill, Model# G777

• Lightweight mill can access nearly all timber
• High-quality mill cuts beams or lumber from 1/2in. To 13in. Thick and 17in. Wide
• Attaches to saw without drilling bar
• Designed to fit chain saws with 20in or less bars
• material type: Steal

User questions & answers

Question:	What is the largest diameter log you can mill with a 20" bar
Answer:	It could be used that way if you had it securely on the counter but it would be way better if you could attach it to something
Question:	I a saw chain b2ft-64dl .325" .058"/1.5. would it be good for the mill? are there any better choices for this job? where can i find them? thank you
Answer:	It is as pictured...the hinges are on the right so it swings to the right!
Question:	Will this work with a 24" or is there a better choice
Answer:	The beveled edge measures 1/4". For additional product information, please contact our Customer Service Department at 1-800-892-3986.
Question:	Sounds like the Stihl MS180C is too weak (32cc). Would it work just for a trial run? What 20" (but not too $$$) saw is recommended
Answer:	Thank you for your inquiry. This item does not have a frame, the edges are beveled. For additional product information, please contact our Customer Service Department at 1-800-892-3986.

Product features

About Granberg International

a young WWII veteran and contract logger named Elof Granberg determined that freehand chain saw sharpening was inaccurate, which unnecessarily increased sawing time. Rather than accepting the status quo, he invented the File-n-Joint in 1954. He also invented and introduced to the chain saw accessory market the first 12-volt portable chain saw sharpener; the first adjustable and portable saw chain breaker/mender and the first chain saw hedge trimmer attachment.

In the 1960s, Granberg acquired the rights to a bar-mounted chain saw mill, nicknamed the 'Alaskan'. Working under the credo 'smarter, not harder', Elof set about simplifying and streamlining the design. Today, the Alaskan MKIII is the industry standard and is sold all over the world. Over the years, the Mini Mill was added to Granberg’s saw mill line as well as the Small Log Mill.

Today, Granberg is still a family owned business and Elof’s descendents are still managing the business and continuing to improve and update the product line. We strive to continue Elof’s high standards and honor his belief that a product can - and must - be affordable, accurate and well designed.

Our American made and assembled products are always backed by top notch customer service, and our sales department is committed to ensuring you always get the right tool for the job.

Product Description

Small Log Mill clamping post assembly, clear polycarbonate safety guard, assembly hardware & instruction manual. Ready to mount with some assembly required. High-quality U.S. made aircraft aluminum and zinc-plated steel construction. Made In The Usa.

Use description:

Clamps onto your chainsaw bar with no drilling required. Tighten pressure bolts on to chain bar to make cuts up to 18” wide and 1/2” to 13” deep. Lightweight and portable, enables user to mill lumber where the tree falls. No previous experience required! Ideal for making slabs, planks and beams. New CNC-Machined billet end brackets! (See photo) These new end brackets are more accurate, easier to adjust, create less vibration than the old die cast version and are virtually unbreakable. Perfect for homeowners, woodworkers, arborists and sawyers. Optimal results will be had when used in conjunction with Granberg ripping chain.

Product description

SWAG portaband tables are designed to fit select models of DeWalt, Milwaukee, Makita, and Harbor Freight, and Grizzly portaband saws. Please make sure your model number is listed in the product details. Here at SWAG our Portaband tables are built for individuals looking for quality, 100% American made tools at an affordable price. Designed for those working with limited space and or those looking to maximize the full potential of their hand held band saws. Product evolution and expansion has led us to SWAG Portaband table V3.0 which features built in dual miter gauge slides, bolt on 1/8" thick steel legs to greatly reduce shipping cost, a removable steel center section and an improved blade slot with narrower window to reduce potential blade binding. The SWAG V3.0 is still compatible with all Milwaukee, Makita and Dewalt deep cut Portaband tables listed. To convert your saw into a vertical band saw installation could not be any easier, remove the factory foot guard two or three screws depending upon model and reinstall the removable center section with the provided fasteners. With the SWAG V3.0 there is a thumb knob included in the kit. Insert the saw into the stand and install the thumb knob into the threaded hole in the removable center section. You now have a saw that performs two functions, a portable band saw and a vertical band saw that does not require any tools to switch between the two functions Our V3.0 table is cut on a CNC laser out of 3/16" thick steel plate, formed on a CNC press brake and weighs in at ~ 14 pounds for ultimate durability. The Table dimensions are 9.75 tall, 11" deep & 13.5" wide. This kit contains all the necessary hardware to attach your DeWalt, Makita, or Milwaukee deep cut Portaband to the SWAG Portaband tables and Harbor Freight Deep cut model # 62800 Harbor Freight Bauer Deep cut model # 63444.

• Made in the USA!
• Milwaukee Deep Cut Model #'s 6230, 6230N, 6232, 6232-5, 6232.51 6232-55, 6232-6, 6232-6N, 6232-8N, 6236, 6236N, 6238, 6238-8, 6238N, 0729-20, 0729-21
• Dewalt Deep Cut Model #'s DWM120, DWM120K, D28770, D28770K, DCS374B, DCS374P2
• Harbor Freight Bauer Deep Cut #'s 63763, 63444, 62800, 1678E-B, Home Depot WEN Brand # 94396
• Makita Deep Cut Model #'s 2107F, 2107FK, 2107FZ, XPB02Z, BPB180Z-18VOLT, Bosch GCB10-5, Grizzly Tools Deep Cut Model # G8692

User questions & answers

Question:	can i use the table to make a true straight cut in 1/4 inch steel plate down a 12 inch length
Answer:	Average spacing for this type of cabinet, so although not accessible to me now, I do recall it being about an inch from the wall.
Question:	Great product - hope i can use it. i have the dewalt dsc374 p2 (i think the "p2" indicates that it's the kit.) will this table fit my saw? thanks
Answer:	Unfortunately, only 2 shelves are included even though the picture shows 3 and there would be room in the cabinet for three. I wrote a review a while back on this very issue, however the picture has not changed and to my knowledge you're still only going to get two shelves...
Question:	Can the V3.0 be clamped in a vise (w/o the legs) like V
Answer:	There are 14 philips screws in the back of the mirror so I would say It appears so.
Question:	Does this stand include miter guides for square or mitered cuts
Answer:	Cabinet measurements are in the details of the product. However, the cabinet is 27 in Long 22in wide and 5 in deep from the wall. Very nice looking cabinet on a budget.

Product description

The HADDON LUMBERMAKER is a chain saw accessory that allows you to make your own valuable lumber for a fraction of the regular cost! It attaches to any chain saw in minutes and guides your saw in a straight line using a guide board, 2x4 or 2x6, allowing you to cut any size lumber right where the tree falls.

• Cut any size lumber you need right where the tree falls, use for a cut off saw,
• Make boards, beams, planks, and more with your chain saw and this inexpensive tool!
• The HADDON LUMBERMAKER fits all chain saws, & attaches to the bar in seconds.
• MADE IN THE USA, includes 30 page "how to" owners manual, fits 2x4 or 2x6 guide board
• Works with regular chain, saw swivels for PLUNG cuts, has a LIFETIME GUARANTEE!!!

User questions & answers

Question:	will my stihl farm boss work with this mill
Answer:	I've used my Stihl 066 Magnum and Stihl 441C to halve BIG logs (36 and 20 inch bars respectively) to halve huge logs. You want POWER and very sharp chains. I use star drive wood screws to attach flat strap steel (I used free concrete form straps) to the plank guide, and to the trunk for alignment. Just bend the mild steel straps to get everything aligned, and go for it. Be sure not to hit dirt, you can always trim off an inch of rough stuff where it finally splits. That OR roll the log onto pallets or small trunk pieces to get it off the ground
Question:	Any recommendations on this vs a typical alaskan or granberg mill
Answer:	The hadden is designed to use your saw vertically along a 2x4 or 2x6, the Granberg uses your saw horizontally. This Hadden is a simple tool that is only accurate with extreme care by the user. It works mostly to flat cut a side of a log. It is not practical for cutting planks or slabs unless you have very large logs. If you use the hadden, you need to aquire a small level to attach to the top of the tool to keep your saw vertical or your cuts will wind back and forth. I also stongly suggest using the 2x6 and not the 2 x 4 which does not offer enough flat surface to stay level.
Question:	Is it possible to split the log down the middle
Answer:	I would (wood) say 20 inches.
Question:	What is the difference between this mill and Granberg? http://smile.amazon.com/dp/B002VA3G3A
Answer:	if your saw has a table with a standard slot, this will fit.