11 best router table fence systems

Product description

This deluxe router table fence will introduce a new level of accuracy and cleanliness to any shop. This deluxe router table fence is made from 3/8 inch thick precision extruded anodized aluminum that will stay straight and true when humidity changes. It measures a full 3-1/2 inches tall and 3-1/2 inches wide. Rear-mounted 4-1/2 inch tall adjustment knobs make it easy to adjust the fence back and forth. Spacing range for adjustment knobs is 18-1/2 to 22-1/4 inches. The fence faces are made from smooth melamine coated MDF. The fence opening can be adjusted by way of 4 rear mounted threaded knobs. The fence opening can accommodate bits up to 3-1/2 inches in diameter. The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face. T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop. Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening. Table and router not included.

• Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
• The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
• Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
• T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
• Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.

User questions & answers

Question:	I'm preparing to buy t-tracks for mounting the fence. What size are the bolts that slide into the t-tracks
Answer:	Should, used to plain rough uneven boards. It is fairly lightweight, but does the job.
Question:	What distance do u have to mount the T track? Does the rotor have to b centered
Answer:	Amazon look up 3.25 blades and it comes up under a number of makes
Question:	What router table will this mount on without modifying the table
Answer:	Hi, The Wen electric hand planer that I got from Amazon does give a super smooth shave on wood. Gerry provides a great answer and "how to" to a similar question for the Wen planer: http://smile.amazon.com/forum/-/Tx1BW3LRTKLZMXW/ref=ask_ql_ql_al_hza?asin=B00OW5AJTG I think you will find it very helpful for your leveling needs. It makes the projects that I have used it for so easy it made me laugh, because it was almost too easy. :) But, just so you know, the knob in the front is where you make the cut or shaving depth adjustments- but it is also where you hold the tool while moving it forward. Keep that in mind when using the tool so you do not accidentally turn your hand and shave off deeper (or less) than wanted. I am happy with it for my DIY projects, so I think it'll help you with yours.
Question:	What is the distance between the T-tracks that hold the fence down to the table? Is this distance fixed
Answer:	There are three overall tools in this line you have a need for 1 - Jointer (NOT "Joiner"). You should look up videos on what this is and how to use it, along with why it isn't just a planer. It IS not cheap, and certainly not a trivial purchase. It's for when you get serious about woodworking. I recommend you look at the CuTech 8" when you consider this. Again, not cheap. 2 - Planer -- This is the main tool for making wood consistent. It is moderately expensive part but makes the sides nominally equidistant (this works if the wood is not bowed, twisted, or otherwise uneven -- which is what the joiner helps with. 3 - one of these. It's an intermediate tool which can, with some care, do some of the work of the above two tools. Not all of it, but some. I'd say blow the extra money and get the 4" model, it's probably worth the extra bucks.

Product description

The Mast-R-Fence II is designed for any 32"x24" router table. The unique mounting track design allows for easy assembly and adjustability. The edge banded MDF fence faces are fully adjustable and easy to remove. The new and improved dust chute allows for quick, easy, and efficient dust removal. The fence has fully adjustable fence tracks that offers adjustable scales for precise setting and positive locking knobs. Innovative offset bars with built in on-board storage makes offsetting the fence fast and precise with preset offsets of 1/32" and 1/16".

• Heavy duty aluminum extruded fence frame
• Fully adjustable fence faces with quick locking knobs
• Side mounted fence tracks with built in scales
• Tool free fence adjustments
• 1/32" and 1/16" shimming/offset bars standard

User questions & answers

Question:	is there anyway to make it any higher, for doing stiles & rails
Answer:	Not sure but I would not recommend Wilton
Question:	I have a jet xactasaw with the short wing extension. i wanted to install a router plate and use my rip fence. after looking around i seen this fence
Answer:	It is safe for the freezer but not really intended for long-term freezer storage.
Question:	Does it include a feather board
Answer:	Outside dimensions are 14-1/2" long by 9-7/8" wide. Hope this helps.
Question:	My table is 1 3/4 thick can I mount this fence to it
Answer:	It is not made of aluminum, it is made of steel with a non-stick coating. I would doubt that it would rust with the non-stick coating but I have not had it long enough to know for sure. It does say it has a 5 year warranty, so if it rusts, they should be willing to let you return it.

Product description

DescriptionThe adjustable angle of the push handle is 0-60 degrees, and the angle of the section of the sheet can be made as required. The scale of the table saw is clear and accurate. The length or cross-section angle of the made sheet is accurate. The table saw has a stable backing, and it is safer to handle the push table.FeaturesMiter gauge-Color:Silver.-Material:Aluminum,stainless steel.-Size:450x178x60mm/17.7x7x2.36inch.Specifications:In addition to being suitable for table saw operation, it can also be applied to operation tables such as inverted engraving machines, with high efficiency.1 * Push aluminum handle1 * Tenoning1 * Limit

• STURDY:There are four sprung loaded ball bearings keep the bar snug in the track, and the fence operating without sideplay.
• MATERIAL:This woodworking tool is made of alluminium alloy, ensuring its durability and sturdy.
• VERSATILITY:The Miter Gauge System can be used for Table Saws, Band saws, Router Tables, Jointers, and More.
• SATFETY:The Miter Gauge Fence System is well designed to ensures safety whiling doing woodworking. Essential equipment for table saw.
• ACCURACY:The precision Miter Gauge pushing tool with adjustable components, making it more accurate.

Product description

The Deluxe Router Table fence kit is two MDF fence plates supported by a solid aluminum "L" fence with built in track will comfortably accommodate router bits up to 3-1/2 in diameter and comes with all the necessary parts for quick and simple assembly. The system is also equipped with a dust port that envelopes the opening between the two MDF fence sections. The mounting fence has a unique shim system; each side of the fence can be shimmed with an aluminum bar that is inserted into offset tracks of varying depth, which in turn nudges your fence forward to the desired depth. Tall adjustment knobs allow easy access for moving your fence forward and backward. This system is available in a 24" or 32" length. Table not included.

• 2 MDF fence plates supported by solid aluminum "L" fence
• Built in t-track
• Accommodates router bits up to 3 1/2" in diameter
• System equipped with a dust port the envelopes the opening between the 2 MDF fence sections
• Tall adjustment knobs allow easy access for moving your fence forward and backward.

User questions & answers

Question:	Where do the two aluminum bars go
Answer:	9in by 12 and 1/16in
Question:	How far from the edge is the mounting slots on the back of the fence? How wide are those slots
Answer:	31 1⁄2" x 24". There's documentation on Grizzly's web site as well.
Question:	Does this come with everything pictured
Answer:	Yes
Question:	Are the 2 mdf fence plates adjustable? meaning do they both slide right or left to increase or decrease the bit opening
Answer:	Not sure what that is, but I think it will work with most routers. You do have use your spacer plate as a template and drill your own holes in the polycarbonate piece in table. Only takes afew minutes to do.I did have to get longer screws to secure it. Hope this helps.

Product description

MATERIAL--This woodworking tool is made of alluminium alloy,ensuring its durability and sturdy.

Perfect for Wood Cutting Project--Improve safety and accuracy on the table saw and the router table.Can be used for Table Saws,Band saws,Router Tables,Jointers.Miter gauge fence system is currently a must-have for every family.

Feature--Our Aluminum Miter Fence is made from one,solid piece of extruded aluminum.On the back,there is an offset track for mounting the fence to a miter gauge.

Easy to Use--Both sides 60¡ãangle adjustable,loosen the knob to quickly adjust the angle,Ideal for cross-cutting wood at a specific angle.

Package Included--1 Pcs Miter Gauge Fence System,1 Pcs Ruler Sticker

• MATERIAL--This woodworking tool is made of alluminium alloy,ensuring its durability and sturdy.
• Perfect for Wood Cutting Project--Improve safety and accuracy on the table saw and the router table.Can be used for Table Saws,Band saws,Router Tables,Jointers.Miter gauge fence system is currently a must-have for every family.
• Feature--Our Aluminum Miter Fence is made from one,solid piece of extruded aluminum.On the back,there is an offset track for mounting the fence to a miter gauge.
• Easy to Use--Both sides 60¡ãangle adjustable,loosen the knob to quickly adjust the angle,Ideal for cross-cutting wood at a specific angle.
• Package Included--1 Pcs Miter Gauge Fence System,1 Pcs Ruler Sticker

Product description

This innovative, anodized-aluminum fence features a table saw-style T-Square adjustment system that ensures the fence will always stay parallel to the miter-gauge slot. Router Table fence.

• The fence adjusts easily with just one hand, and locks firmly in place with dual locks
• A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end
• Features a measuring scale that allows you to position the fence and make adjustments
• Precision measuring system with micro-adjust

User questions & answers

Question:	Can the insert plate on this bundle be specified so as to fit the bosch 1617 router? (predrilled for porter-cable & bosch
Answer:	110vac 20 amp.
Question:	Are the table stop and unnecessary micro adjuster inclded in this kit as pictured but not described anywhere
Answer:	Yes. The fence comes off.
Question:	what is the difference between the table fence kit($699) and table fence bundle
Answer:	Honestly, I wouldn’t waist your money on this. The wrenches that come with it have rounded and if you can get the chuck tight enough to hold a bit, you’ll never get it loose again. And trying to use open ended wrenches, they really don’t fit well. I would suggest spending a little more money and get a better table and router. You’ll save yourself a lot of aggravation. I used it twice before I upgraded to a different router and table. I hope this helps.
Question:	will this table fit the Bosch 1617evspk router
Answer:	I just got the router and had to change the adapter sleeve to the 1/4" bit size. The adapter sleeve does not tighten enough on the bit shaft therefore I cannot use my 1/4" bits. Very disappointed.

Product features

Kreg PRS1015 Router Table Fence

• T-square style self-squaring carriage
• Rugged anodized-aluminum fence
• Independent sliding fence faces
• Precision measuring system with micro-adjust
• Jointing feature with jointing rods

Unmatched Versatility, Incredible Adjustability - This innovative, anodized-aluminum fence features a table saw-style T-square adjustment system that ensures the fence will always stay parallel to the miter-gauge slot. The fence adjusts easily with just one hand, and locks firmly in place with dual locks: A large paddle lock on the infeed end, and a quarter-turn lock on the outfeed end that prevents fence deflection,

Product description

MATERIAL--This woodworking tool is made of alluminium alloy,ensuring its durability and sturdy.

Perfect for Wood Cutting Project--Improve safety and accuracy on the table saw and the router table.Can be used for Table Saws,Band saws,Router Tables,Jointers.Miter gauge fence system is currently a must-have for every family.

Feature--Our Aluminum Miter Fence is made from one,solid piece of extruded aluminum.On the back,there is an offset track for mounting the fence to a miter gauge.

Easy to Use--Both sides 60¡ãangle adjustable,loosen the knob to quickly adjust the angle,Ideal for cross-cutting wood at a specific angle.

Package Included--1 Pcs Miter Gauge Fence System,1 Pcs Ruler Sticker

• MATERIAL--This woodworking tool is made of alluminium alloy,ensuring its durability and sturdy.(Checking detailed size on the picture to make sure if it fit your table saw!!!)
• Perfect for Wood Cutting Project--Improve safety and accuracy on the table saw and the router table.Can be used for Table Saws,Band saws,Router Tables,Jointers.Miter gauge fence system is currently a must-have for every family.(Checking detailed size on the picture to make sure if it fit your table saw!!!)
• Feature--Our Aluminum Miter Fence is made from one,solid piece of extruded aluminum.On the back,there is an offset track for mounting the fence to a miter gauge.(Checking detailed size on the picture to make sure if it fit your table saw!!!)
• Easy to Use--Both sides 60 angle adjustable,loosen the knob to quickly adjust the angle,Ideal for cross-cutting wood at a specific angle.(Checking detailed size on the picture to make sure if it fit your table saw!!!)
• ATTENTION--Please check the detailed size on the picture to make sure if our miter gauge fence system fit your table saw.

Product description

Rockler 4-Piece Router Table Accessory Kit includes an easy-mount dust port, plus three featherboards for more consistent cut quality and to help prevent kickback. Two of the featherboards mount to the fence, exerting pressure down toward the table, while the third mounts to the table and keeps your work against the fence.

Features:

Dust port has a 2-1/2'' OD (2-1/4'' ID) hook-up

Table mounted featherboard which fits miter slot openings of 3/8” deep x 3/4" wide, can be secured anywhere along the miter track with the twist of the knob

Fence-mounted featherboards slip into the accessory T-track, and are easily adjustable without tools

• Rockler Fence Featherboards
• Rockler Table Featherboard
• Rockler Dust Port

User questions & answers

Question:	will a royobi router fit on it
Answer:	According to Mike Taylor (the Taylor in Taylor Toolworks): "The spacing range for the 24" is 18-1/4" to 22-1/4" and for the 32" is 18-1/2" to 22-1/4". Because of the way a router fence works, the router must be more or less centered with respect to the fence, but it doesn't have to be centered with respect to the router tabletop--just put the opening for the router place where you want it and install some t-tracks accordingly.
Question:	Does it come with the router mounting plate that is pictured
Answer:	Made my own router table
Question:	does it Include a double outlet power strip
Answer:	I have mine set up on a Husky portable router table, I measured it and center line to center line 17 11/16" is the distance and in my set up it is fixed. This fence is a 100% better than my old set one of my best buys.
Question:	Does come With the wood flat and fence or just the plastic parts
Answer:	Have only used it a few times but for me yes its worth it. Planer came without the spare blades mentioned in the owners manual. I contacted the seller and they sent a set of spare blades . It has a very nice cut and is much quieter than I was lead to believe it would be.

Product description

This 24" x 32" table has a 1"-thick MDF core that absorbs vibration and offers mass to help create a stable router table. A tough Easy-Slide surface, made from high-pressure laminate, helps work pieces glide easily. Underneath, steel-reinforcing struts ensure that the table will stay flat to provide years of dependable service.

• Router Table Top
• A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
• Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge

User questions & answers

Question:	Is this compatible with Bosch RA
Answer:	Yes. To fit in the shoot we recommend cutting it into the right pieces
Question:	What is the material this top is made from
Answer:	150 watts
Question:	Will this fit kreg krs1035 router table stand
Answer:	Slow Masticating Juicer have no stainless steel blades
Question:	Can you cut the sides to be a table saw extension
Answer:	The fraim work is aluminum, the rest is stainles sreel, the cutter head and guide that keeps the meat from rolling up around the cutter head.I have had my tenderiser about two years now and am amaized how good it works. Between my son and I we have cut up and run 5 or 6 deer through tenderising. I had planned to purchase the electric motor to put on it but it is so easy to use even tenderising deet a child can do it. It is well built and wish I had bought one 10 years ago! I give it 5 stars and heighly recemend it.

Product features

Kreg PRS1025 Router Table Top

This rugged MDF table top provides a solid, secure, and quiet routing solution for any workshop. A 1"-thick (25mm) MDF core provides a flat, solid top that absorbs vibrations, while steel reinforcing struts prevent sagging-even under the weight of heavy routers and lifts. Durable, high-pressure laminate skin offers a low-friction Easy-Slide surface, making it easy to slide workpieces across the surface. Thick edgebanding protects the top against bumps and abrasions. The top is predrilled for holes for Precision Insert-Plate Levelers. A heavy-duty 3/8" x 9 1/4" x 11 3/4" (9mm x 235mm x 298mm) insert plate handles large routers with ease. Versatile Level-Loc Reducing Rings lock in level and flush with the plate surface with the included ring wrench. A brass starter pin ensures controlled bit contact during freehand routing. The laser-engraved target pattern on the underside of the plate ensures simple, accurate router centering and mounting. Four included Precision Insert Plate Levelers keep plate and table top surfaces perfectly flush. This versatile table top works with standard (3/8" x 3/4") miter gauge guide bars. It also accepts Featherboards and other accessories, and is made from durable anodized aluminum. Create a custom router table system to meet all of your routing needs with the Kreg Precision Router Table Fence and Kreg Multi-Purpose Shop Stand. Or, create your own system with a shop-made fence and stand.

• 1" thick (25mm) MDF core with steel reinforcing struts
• Durable Easy-Slide low-friction surface
• Level-Loc reducing rings: 1", 1 3/16", 2 5/8" (25mm, 30mm, 66mm), and ring wrench
• Kreg Precision Insert Plate Levelers
• Anodized Combo Trak miter-gauge/T-slot track

Product description

Name:Featherboard

Material: HIGH-TECH POLYMER



Product Size:

Thickness: approx. 16mm

Width: approx.21.5cm

Total length: approx.26.5 cm

Weight: about 1.61 pounds.



Package included:

2pcs x Featherboards



Feature：

The product has simple structure, easy operation, strong clamping force, high precision and wide application range.

If you want more convenient and accurate DIY tools, feather board is your essential tool.

In the process of using as a plate cutting saw, fix the plate so that the plate does not recede, tilt, or slip. The feather plate baffle is inclined at the advancing direction of the board to ensure that the advancing direction of the board is unobstructed and increase the friction.



Assurance:If there is any product problem within 90 days, please contact us in time, we guarantee unconditional full refund!

• Widely used: 4 Miter Bars are suitable for all standard miter slots（3/8 x 3/4 Inch ). Easily connected to t-slots or miter slots on table saw,band saw,router table or any other woodworking machine with a gauge slot.
• Good quality: It is made of high-quality materials, it is strong and durable and can be used for a long time, ensuring that it maintains its original shape. And has special angled fingers, so they can provide stable pressure, resulting in a cleaner incision, without the opportunity for recoil, vibration or lifting.
• Safe: The feather loc board for tablesaw can firmly fix the wood and prevent bounce, not only protects your hands, but also helps prevent recoil, restraint and bending of the blade.
• Smooth use: Smooth curved lines and comfortable texture make your wood work more convenient and quicker.
• Quick and easy to use: The unique bevel gauge groove with an ergonomic knob, the woodworking Feather Loc Board can be quickly and easily connected to the bevel groove or T-slot, you can according to your needs DIY.

User questions & answers

Question:	Are the miter bars metal or plastic
Answer:	Sí, puedes encontrar un enrutador en la mesa.
Question:	Does it work with a standard 3/4" wide x 3/8" deep miter saw slot? I understand that it works with T - trac, but that is not my need
Answer:	Yes, the DWE6000 will have a micro adjustment scale.
Question:	What size slot is this designed for
Answer:	The model DWE6000 is 220V
Question:	Is it the same cheap MDF incra uses for this one also or is it real wood
Answer:	In my experience most cabinet sets cut the pieces laying down. You just need a good miter sledge on you table for cutting the ends of Stiles and Rails. Keep it square. Bedt wishes. Godspeed
Question:	How large are the MDF base panels? (individually
Answer:	It’s a nice fence. It does not have “easy” fine adjustment but it does hold a line well when secured. Check your dimensions on the specs to be sure this can be mounted on your table.
Question:	Does this kit supply everything to make a tapered cut on a table leg
Answer:	No, it does not include a feather board, but I do have them available
Question:	Does this kit supply everything to make a crosscut sled
Answer:	The Mast-Fence II fits all tabletops from 24" to 32" wide and from 1/2" to 1-1/2" thick.
Question:	Will this fit bench dog router table
Answer:	The JessEm plate that fits this top has the following quoted dimensions...."The Rout-R-Plate is a 9-1/4" x 11-3/4""So the answer is Yes. Your plate will fit.
Question:	length of the Fence
Answer:	No, one is all you need
Question:	Can the kreg prs1200 precision beaded face frame system be installed on the delta router/shaper table model number
Answer:	Yes it can
Question:	What size router collet do you need
Answer:	Yes it will work with the 4010 fence
Question:	Does it fit a delta
Answer:	It is "comfortable" . Like their table and fence, highly precise in the machining.
Question:	can this be mounted to a makita job site stlyle saw if im making it a permanent fixture
Answer:	Both the miter guide and the blade guard (they are separate) attach to the fence. The miter guide actually rides on top of the fence in a track; when adjusted properly it really glides smoothly and with play that I can detect. Both are removed very quickly by just riding them to the end of the fence and off, T-track style. The one thing I wish the miter fence had is a simple height-adjustable hold-down that attaches firmly to the moving fence itself. That would allow you to apply downward pressure with the same tall knob (that nice tall gold thing in the picture) that is used to advance the fence. Now it is necessary to use one hand (or push block for close stuff) to hold down the workpiece securely as it passes through the bit.
Question:	Will this fence fit a craftsman 113.298840 without any modifications
Answer:	No, the main router fence in the picture is NOT included. According to the JessEm website: "The Mite-R-Slide II will fit the following JessEm Router Fences, Mast-R-Fence II (Model # 04010) and our brand new TA Fence (Model # 04500)." Fences purchased separately.
Question:	what is the max width of cut
Answer:	My table did not have any defects. However, it was purchased over 10 years ago, so can’t comment on any recent changes. I just added castors to the table (off brand) so that I can move it within my garage more easily.

Product description

Introducing the Table Saw Precision Miter Gauge System by POWERTEC. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops and without calibrating. Set Contains the Following: High Precision Miter Gauge Multi Track Fence with Scale (24 inch long by x 3 inch tall) 3” T-Track Flip Stop (multi position) Miter Gauge Features 27 angle indexing stops Laser-cut aluminum construction A multi-functional 45 Degree setting 4 expansion discs that adjust to remove all side play A removable plates that can be used with t-track miter slots Works in standard ¾” x 3/8” miter slot, with or without t-slots The gauge can be used as is, with a sacrificial fence, or with the included 24” x 3” multi –track fence Fence Features Laser engraved 24” scale, right to left 24” x 3” tall multi-track (fence section) Made out of anodized extruded aluminum for strength and durability Universal t-track slots that accept 1/4"-20 hex bots, 1/4” t-bolts and 5/16” t- bolts Possesses optimal versatility as a miter gauge fence, router or shaper fence and table saw sub-fence, chop or radial arm saw fence Flip Stop Features Can work as a right or left stop Tongue firmly locks into track to clamp down and prevent unnecessary movement Anodized aluminum body and a move-able stop arm (measuring at 3” x ¾”x 5/16”) Puts the control in your hands, allowing you to set whether it works with the extruded fence face or you can set it to work with a sacrificial fence

• Includes: table saw miter gauge, multi-track miter fence, t-track flip stop
• Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results
• High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right
• Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts
• Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right

User questions & answers

Question:	Will this fit the 14” porter cable band saw
Answer:	Probably. If the 14 PC band saw gas a standard 0.75" wide slot, then this will fit.
Question:	How long is the bar
Answer:	17 inches overall length including where you adjust the angle
Question:	How long is the mitre slide
Answer:	If by miter slide, you mean the part that slides in the groove of whatever table you intend to use this with, the length is 17-3/4".
Question:	What is the exact width of the device? I would like to use it on my bandsaw
Answer:	7 inches at the widest point.

Product features

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” multi –track fence with 27 Angle Stops

Introducing the Table Saw Precision Miter Gauge System by POWERTEC. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops and without calibrating.

• Includes: table saw miter gauge, multi-track miter fence, t-track flip stop
• Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results
• High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right
• Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts
• Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right