9 best mlcs bit sets

Product description

This high-quality carbide tipped set includes a variety of bit sizes and styles: 4 straight bits (3/16-inch, 1/4-inch, 1/2-inch, 3/4-inch), 1 round over bit (3/8-inch), 1 cove bit (1/2-inch), 1 roman ogee bit (5/32-inch), 1 45-degree chamfer bit, 1 flushtrim bit (1/2-inch), 1 rabbeting bit (3/8-inch), 1 dovetail bit (1/2-inch x 14-degree), 1 V-groove bit (3/8-inch), 1 hinge mortising bit (1/2-inch), 1 panel pilot bit (1/4-inch), 1 round nose bit (1/4-inch), 1 allen wrench, and 1 bearing to convert round over bit into beading bit. It also comes with a sturdy wood storage box.

• Quality, carbide-tipped bits
• 15 different bits in set
• Wood storage box Included
• 1/2-inch shanks
• Economical, all-purpose starter set

User questions & answers

Question:	Does this, or does this not, have profile "pictures" for each bit? There is one yes and one no answer on here
Answer:	I have used other brands of bits and they seem to work good in it.
Question:	What's the max rpm these bits should run? thanks
Answer:	Muy buena compra.
Question:	How do I use the bearing bit snd allen wrench? There's no instructions, and as a novice, I'm totally lost
Answer:	Not sure but most likely yes. I think they are all copies of the original Ingersol Rand.
Question:	I have a router made by bosh 1617evspk, does 3/4" straight bit fit my router
Answer:	The shank diameter approx 0.39inch.
Question:	how much does it weigh and how long is it
Answer:	Sí, es adecuado para esta marca.
Question:	How long does it take to reach full charge for the batteries? Thanks
Answer:	Yes it does, just make sure the arbor fitting you use is for the 1/8" shaft.
Question:	The case that the drill cimes with. Is there room in it to store drills bits and small accessories
Answer:	Yes
Question:	does it have a metel transmission
Answer:	Better desription required ...ie. does 'drian' mean Drain ? If so ...what sort ? Hole in a Kitchen Sink ? Hole in the Ground for Rain water ??

Product features

DCD991P2 20V MAX LITHIUM-ION BRUSHLESS 3-SPEED DRILL/DRIVER KIT

DEWALT-built high power, high efficiency brushless motor delivers up to 57% more run time over brushed

Powerful

The 20V MAX Drill/Driver (DCD991) features a powerful brushless motor that supplies 820 Units Watts Out (UWO) for a faster application speed.

Durable

Featuring durable nitro-carburized metal ratcheting chucks and comfortable handle grips, these tools are GUARANTEED TOUGH for durability on the jobsite and include coated and sealed switches that help to resist moisture and dust contamination.

Product description

MLCS steel forstner bit extender is 5-Inch long. Extends bit approximately 3-Inch. For 3/8-Inch shank bits (MLCS forstner bits under 2-1/4-Inch cutting diameter, excluding metric sizes). Twin locking set screws hold bit straight and true. Can piggy back if needed for greater extension.

• Non Slip Hex Shank
• High Quality Steel
• Drill Flat Bottom Holes
• Item Package Dimension: 5.0" L x 1.0" W x 1.0" H

User questions & answers

Question:	What size are the set screws
Answer:	your hammer is suitable of the hex shank，no this one
Question:	Will this bit extender accomodate a hex shank bit or must the shank be round
Answer:	Will what fix the scaper
Question:	Would this work to extend Milwaukee 3/8” 3-flat step drill bit
Answer:	As the description says, it has variable speed.
Question:	What is the bit size of the shank and inner diameter size - 1/4, 3/8? If I have a rod smaller than a 1/4 bit (.20) will the allen screws hold it
Answer:	The only difference I can see is that 45355 is slightly more powerful at 1800 watts as opposed to 1180 watts fpr the 45356. I have been using the 1180 watts to do home renovations and have not found it lacking

Product description

The 10-piece set is an all-purpose set for the professional woodworker. It has a great variety of the most popular carbide-tipped Bits in an elegant storage case. High quality micrograin carbide tips that are precision ground provide superior wear resistance and sharp edges for the best finish. Improved hardness uniformity in shank and body resist breakage. 1/2 in.-Shank bits give greater stability and LEDs vibration during use, and 1/4 in.-Shank bits are more Ideal for the thin profiles.

• Most popular profiles for all routing job applications
• Micrograin Carbide tips provide superior wear resistance and long life
• Precision-ground Carbide tips for sharper edges and smoother finish
• Reusable storage case with a solid wood base and clear plastic top

User questions & answers

Question:	Are these router bits compatible with any Bosch router
Answer:	The bolts size: 10*35mm 12.9 M10

Product features

Description

The 10-piece set is an all-purpose set for the professional woodworker. It has a great variety of the most popular carbide-tipped bits in an elegant storage case. High quality Micrograin carbide tips that are precision ground provide superior wear resistance and sharp edges for the best finish. Improved hardness uniformity in shank and body resist breakage. 1/2 In.-shank bits give greater stability and LEDs vibration during use, and 1/4 In.-shank bits are more ideal for the thin profiles.

Benefits

• Most popular profiles for all routing job applications
• Micrograin carbide tips provide superior wear resistance and long life
• Precision-ground carbide tips for sharper edges and smoother finish
• Reusable storage case with a solid wood base and clear plastic top

Product description

The 3-piece door set is ideal for the professional woodworker in making elegant cabinetry. It includes the stile and rail bit as well as the panel raiser bit needed to make a complete door. The bits come in an elegant storage case. High quality Micrograin carbide tips that are precision ground provide superior wear resistance and sharp edges for the best finish. Improved hardness uniformity in shank and body resist breakage.

• This set allows the woodworker to build doors from 3/4 In. thick to 7/8 In. thick wood
• Close-tolerance manufacturing to ensure consistently smooth, tight-fitting joints
• Micrograin carbide tips provide superior wear resistance and long life
• Precision-ground carbide tips for sharper edges and smoother finish
• Reusable storage case with a solid wood base and clear plastic top

User questions & answers

Question:	can i use these bits with a 2 1/4 horse router
Answer:	yes, it is! the quality is pretty good

Product description

The 6-piece set is a multi-purpose set for the professional woodworker. It has a great variety of the most popular carbide-tipped Bits in an elegant storage case. High quality micrograin carbide tips that are precision ground provide superior wear resistance and sharp edges for the best finish. Improved hardness uniformity in shank and body resist breakage.

• Most popular profiles for straight, trimming, decorative edging, and dovetail joinery job applications
• Premium-quality micrograin Carbide tips provide superior wear resistance, sharper edges, excellent smoothness and long life
• Balanced and controlled cut design helps minimize kickback and allows smooth cuts with minimal vibration
• Compact ball-bearing pilot guides bit along edge of material
• Reusable storage case with a solid wood base and clear plastic top

User questions & answers

Question:	why this set costs 3 time more then any other set that has more bits
Answer:	No
Question:	Is this an oppropiate set for laminate trimming and beginning woodworking
Answer:	Yes
Question:	What is the maximum recommended RPM for these router bits
Answer:	Yes
Question:	Made in usa
Answer:	Yes

Product description

Use the Up Spiral Bit Set for mortises, dado cuts, and deep blind holes where chips must be pulled out of the cut, and where speed of cut is the primary consideration. Set contains the following Up Spiral bits: 75-101 3/16" dia., 1/4" shank dia.; 75-102 1/4" dia., 1/4" shank dia.; 75-104 5/16" dia., 1/2" shank dia.; 75-108 1/2" dia., 1/2" shank dia.

• Set comes in Freud’s unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as hand-held and tablemounted portable routers.

User questions & answers

Question:	I just got these. They are stuck in the plastic inserts. Anybody else have that problem? I can't pull them out, even using leather gloves
Answer:	If you mean the clip that allows you to hang the drill on your belt it does.
Question:	What is the maximum depth of cut these will make
Answer:	I have the same question! Put NO my Visa card!
Question:	How long are these? Can I make a hole not a -groove- on 3/4" material
Answer:	Fits any air hammer
Question:	Are the 5 piece up cut set made of solid carbide or hss? none stated in description
Answer:	It all depends on the bit shank size/type your hammer drill is designed to accept. This particular chisel made by the American Hardware Company is a 0.401" straight shank which is the standard size for this type of bit. There are other types of shanks, however, and it is possible your electric hammer drill uses a type called SDS or SDS+. These bits have grooves cut in the shank and lock into the chuck using these grooves - a different method of attachment than the straight standard bit shaft. For this reason, even if the wrong type of bit will fit into the tool, it should never be used as it could come loose and cause injury and/or damage to the tool. Your instruction manual, or a google search, should clarify the correct bit type for your particular hammer drill. The American Hardware bits/chisels are quite well made and, if they make a line that works for your drill, I think they will serve you well.

Product description

All sets Feature Freud's NEW Premier Adjustable Rail & Stile Bits. Set includes 2 raised panel adjustable cabinet bits with backcutters, both have 1/2" shank diameter: Part 99-761 Ogee backcutter bit, 1-11/16" dia.; 13/64" large radius; Part #99-571 Ogee with backcutter, 3-1/2" dia., 1-3/16" large radius. Router Bit Set. Application: Combines our most popular rail and stile bit sets with one of our exclusive Quadra-Cut™ Raised Panel Bits. Made In Italy.

From the Manufacturer

This new 3-Piece Door Bit Set combines the New 99-761 Premier Adjustable Rail and Stile bits along with the 99-520 2+2 raised panel bit. This set allows the woodworker to build doors from 5/8 inch to 1-1/4 inch thickness and ANY length long tenon construction for rock-solid joints that last a lifetime. Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile for blind tenons, through tenons, or bridle joints. Imagine creating rattle free flat panel doors. Adjustable shims enable both a tight fit when using plywood panels and the ability to use thick panels ( from 5.5mm to 6.35mm ). The unique cutter geometry virtually eliminates tearout. This set features Freud's 99-520 2 + 2 raised panel bit. Two small wings that cut downward and two large wings that shear upward, produce an extremely smooth cut in hardwoods, softwoods and even plywoods. This revolutionary design is combined with a backcutter so that, in one step, you can create a flawless raised panel door that is flush with the frame on both sides. Bits feature Freud's Perma-Shield coating to resist heat and pitch build up along with rust, and Freud's TiCo Hi-Density Carbide to maximize bit life and material finish. This set is designed for use on table-mounted portable routers. Optional cutters are available for double sided profile doors (99-861) and glass panel doors (54-760) with variable thicknesses and long tenons for perfecting matching profiles on all doors because it's the same set of router bits. This set produces an Ogee profile on the rail and stile and panel bit. All bits are 1/2 inch with , plus set comes with an attractive wooden storage box with instructional poster.

• All bits have 1/2" shanks and are designed to be used on 5/8" to 1-1/4" stock.
• Includes attractive wooden storage box.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers with 1/2" shank.

User questions & answers

Question:	Will this bit be easily snap under pressure from been used to dig mortise in wood with a router
Answer:	Yes
Question:	Whats the longest length available for spiral router bits
Answer:	Yes, the lid for the tool case should be clear.
Question:	What size hole does the half inch shank make
Answer:	I got the two drills for my home use and I use them all the time. I'm a Great Grandma, Grandma, Mom and Self Employed. This set is fantastic and worth every penny.
Question:	the shanks look to be different sizes are they all
Answer:	No odea

Product description

All sets Feature Freud's NEW Premier Adjustable Rail & Stile Bits. Includes 2 adjustable raised panel cabinet bit sets with backcutters. Set contains Part #99-760 round over bit, 1-11/16" dia., 7/32" large radius, 1/2" shank; Part #99-569 cove with backcutter bit, 3-1/2" dia., 1-1/2" radius, 1/2" shank.

From the Manufacturer

This new 3-Piece Door Bit Set combines the New 99-760 Premier Adjustable Rail and Stile bits along with the 99-569 2+2 raised panel bit with backcutter. This set allows the woodworker to build doors from 5/8 inch to 1-1/4 inch thickness and ANY length long tenon construction for rock-solid joints that last a lifetime. Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile for blind tenons, through tenons, or bridle joints. Imagine creating rattle free flat panel doors. Adjustable shims enable both a tight fit when using plywood panels and the ability to use thick panels ( from 5.5mm to 6.35mm ). The unique cutter geometry virtually eliminates tearout. This set features Freud's 99-569 2 + 2 raised panel bit w/backcutter. Two small wings that cut downward and two large wings that shear upward, produce an extremely smooth cut in hardwoods, softwoods and even plywoods. This revolutionary design is combined with a backcutter so that, in one step, you can create a flawless raised panel door that is flush with the frame on both sides. Bits feature Freud's Perma-Shield coating to resist heat and pitch build up along with rust, and Freud's TiCo Hi-Density Carbide to maximize bit life and material finish. This set is designed for use on table-mounted portable routers. Optional cutters are available for double sided profile doors (99-860) and glass panel doors (54-760) with variable thicknesses and long tenons for perfecting matching profiles on all doors because it's the same set of router bits. This set produces an Quarter Round profile on the rail and stile and a cove profile on the panel bit. All bits are 1/2 inch with , plus set comes with an attractive wooden storage box with instructional poster.

• All bits have 1/2" shanks and are designed to be used on 5/8" to 1-1/4" stock.
• Includes attractive wooden storage box.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers with 1/2" shank.

User questions & answers

Question:	Can this set be used with a Shaper ... My shaper has both 3/4 and 1/2 spindle
Answer:	I am in Washington and had it sent to me here then I mailed it to Alaska which is considered international. Go figure. Because of the batteries it has to go by boat and cannot go by plane. You just have to tell the people at the post office. Ir was easy but does take time.
Question:	How well does this cut on mdf
Answer:	Add bare tool in cart and is credited at time of purchase
Question:	what does the CD that comes with the kit contain? I could not play mine
Answer:	Si con tarjeta de debito no tendrías problema
Question:	Description says 5/8-1-1/4 inch thick stock can be used. But the picture of the stile on the front of the box shows 5/8-1" thickness for the stile
Answer:	It's not "a 60 V battery in a 20 V drill". The battery switches voltage depending on the drill you are using. The amp hour rating applies to the 20 V setting, so the amp hour rating at 60 V will be 1/3 that. It's much bigger than the standard/nonFlex 20 V batteries, so it will run cooler. The reason the battery can switch between 20 and 60 V is so the new batteries will also run their new 60 V line of tools. I could go on. It's a long story.

Product description

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. As always, Whiteside Machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts; along with rigid quality control, vital customer feedback and extensive field testing. Whiteside Machine Company.

• Whiteside Router Bits are made with Premium Carbide
• Precision ground for proper balance at high RPM
• Industrial Quality

User questions & answers

Question:	What degree cut are blades at? Thank you
Answer:	Thank you for your question. The GTS10J table saw is not sold in North America and we do not have the specifications to know if the TS1008 is compatible. Sorry for the inconvenience. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	what size shank are these
Answer:	Thank you for your question. The TS1008 can be used with the TS1016 without interfering with each other. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	It seems that the male bit would leave very delicate edges of the plywood. Before and during glue up is this a problem for either edge or long grain
Answer:	Thank you for your question. The TS1008 Table Saw attachment is made up of metal and extend table additional 12" for working with wide long pieces of materials. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	What is the maximum width material that the 3400 bit set will accommodate
Answer:	I have the same saw, and I think the TS1003 is the right side extension, and the TS1016 is the rear extension. I have all 3 on my saw and they work great.