12 best dewalt planer dw735

Product description

13", heavy duty, portable 2 speed thickness planer.

The DEWALT DW735 features a three-knife cutterhead and a powerful 15 amp motor that delivers 10,000 rpm. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock.

Powerful 15 Amp Motor for Clean Cuts

Benchtop planers are a long-term investment that allow you to save money over time by buying rough stock and dimensioning it yourself. They also make creating custom materials easier, which, in turn, makes getting great results easier.

The DW735 13-Inch Planer's powerful 15 amp motor can handle deep cuts in tough hardwoods. Its three-knife cutterhead and two-speed gearbox deliver 96 or 179 cuts per inch (cpi). Use 96 cpi when dimensioning material and 179 cpi for a finer finish.

Reversible, Disposable Knives for Convenience

The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Large Capacity and Easy, Accurate Depth Adjustment

This planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

Fan-Assisted Chip Ejection for Dust Management

The DW735 features a Fan-Assisted Chip Ejection System with a motorized fan that breaks down debris as it leaves the cutterhead and blows it into one of the two dust shrouds (included). One shroud disperses the chips down onto the shop floor while the other provides a connection for a vacuum hose or dust-collector hose.

This sturdy planer weighs 92 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 13 inches.

The DW735 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DW735 DEWALT 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead, dust-hose adapter, and dust-ejection chute.

From the Manufacturer

The DW735 13-inch thickness planer from DeWalt provides best in class surface finish through a one of a kind three knife cutter-head--even in hard to plane figured woods. At 96 or 179 cuts per inch, the DW735 offers the finist finish via the most cuts per inch available on a benchtop thickness planer. A fan-assisted chip ejection system aids in the removal of debris and prevents excess chips from marring your material. The unique automatic carriage lock minimizes the movement that causes snipe without engaging a lever before and after each pass. A solid 19-3/4-inch cast aluminum base provides twice the rigidity of traditional material support systems that utilize folding tables. The DW735 is a must for the serious woodworker.

FEATURES

• Powerful 15.0 Amp, 10,000 rpm motor handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
• 19-3/4-inch cast aluminum base is 2X more rigid than a standard 10-inch base and folding tables
• Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user
• Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass
• Extra-large turret depth stop allows users to return to most frequently used thicknesses with ease

SPECIFICATIONS

• Amps: 15.0
• No Load Speed: 10,000 rpm
• Max. Depth of Cut: 1/8-inch
• Depth Capacity: 6-inch
• Width Capacity: 13-inch
• Tool Weight: 92 pounds
• Shipping Weight: 100 pounds

• Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine

User questions & answers

Question:	What is the table thickness (or height from the bottom to the table top
Answer:	from the bottom of the planer stand to the top of the planer intake is 2 1/2 inches. Our planer is also mounted on a plate to the stand so that adds additional height too. The table is 2 inches thick at the intake.
Question:	hello I wonder if they are including taxes and shipping to Mexico are included
Answer:	Currently we do not ship to Mexico.
Question:	What is snipe
Answer:	A snipe occurs within the first 2" on the infeed and outfeed of the wood. The blade may cut deeper when a snipe occurs.
Question:	Is this made in the USA
Answer:	Dewalt features a large “made in the USA” or “assembled in the USA” branding on most of not all their products that are manufactured or assembled stateside.

Product description

Designed to work with the DW735 planer, the DeWalt DW7351 folding tables are detachable and can be folded for convenience. With lightweight and tough aluminum construction, these 13-inch long tables add length to the planer surface. These tables measure 13 inches long and come with an easy-to-install hardware kit.

From the Manufacturer

DEWALT DW7351 Folding Table for DW735 Planer

• Productivity
• Performance
• Backed by a 3-year warranty
• Lightweight and tough aluminum construction
• Easy on/off

User questions & answers

Question:	are there two tables
Answer:	No it will not. Your DW733 is a 12.5 inch planer an this table is for a 13inch planer. Search for parts for your model, or : https://www.ereplacementparts.com/table-p-68017.html
Question:	sorry to be redundant. So ordering 1x DW7351 gets me both infeed and outfeed tables?Thanks
Answer:	They are definitely stainless !! a magnet sticks to them and a magnet will not stick to aluminum !! It says to keep them polished and or waxed to keep them protected and slick !
Question:	Will this folding table fit on a dw733 dewalt planer
Answer:	Not that I am aware of. From the feed side it discharged left.
Question:	Are these extension tables aluminum or stainless steel? Several reviews say stainless but Amazon description says aluminum
Answer:	not sure I use it on my jet planner

Product description

Disposable, reversible, M2 laminated high-speed steel blades stay sharper and last longer than conventional knife materials. Machined locator pins make alignment of new knives fast and easy. Manufactured in Taiwan.

A planer is necessary for all wood finishing jobs, but a quality planer needs quality knives. The DEWALT DW7352 replaceable knives for the DW735 Planer help your planer get the job done well. Crafted from M2 laminated tool steel, these blades outlast the industry standard and are double sided for continual performance. The machined locator holes make installation a snap by aligning with the cutter-head. Choose these blades as a better, more convenient and cost effective alternative to sharpening.

From the Manufacturer

DEWALT DW7352 Replaceable Knives for DW735 13 Inch Planer

• Disposable, Reversible, M2 laminated high-speed steel blades stay sharper and last longer than conventional knife materials
• Machined locator pins make alignment of new knives fast and easy
• Manufactured in Taiwan
• M2 laminated tool steel stays sharper and lasts longer than conventional knife materials
• Machined locator holes help users align knives on cutter-head during knife change
• Generates a snug fit around pins on cutter-head
• Double sided for continual performance
• Cost effective alternative to sharpening

User questions & answers

Question:	Will these fit a Craftsman
Answer:	No, the DEWALT DW7352 is not compatible with the CRAFTSMAN 351.217130.
Question:	Will these blades also fit a wen 13 in. Planer
Answer:	Yes. https://www.ebay.com/itm/Planer-Jointer-Blade-Sharpener-Kit-15-Made-In-USA-Hardwood-w-FREE-SHIPPING/163554087945 I have 2 sets I've sharpened multiple times.
Question:	Will these fit a Craftsman
Answer:	Yes, this includes the in-feed and out-feed tables
Question:	can these blades be sharpened
Answer:	Correct, DW7351 includes the infeed and outfeed tables.

• Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
• Disposable, Reversible, M2 laminated high-speed steel blades stay sharper and last longer than conventional knife materials
• Machined locator pins make alignment of new knives fast and easy

User questions & answers

Question:	Can i get the segmented cutter head as an option with ordering this planer, without having to buy the segmented cutter head separately
Answer:	No, you would have to look for an aftermarket head
Question:	What is the difference between the dw735 & dw735x
Answer:	The 735x comes with the infeed/outfeed extensions
Question:	Hi, is it 230V or 110V
Answer:	This particular model is 110V. Since it is also sold in the UK, I'm sure there is a 220v version.

Product features

DEWALT DW735 13-Inch Two Speed Thickness Planer

The DW735 13 in. Three Knife, Two Speed Thickness Planer is powered by a 15 Amp motor to easily managing large cuts in wider materials. Three-knife cutter head with 10,000 rpm and feed speed options for 96 or 179 CPI provide optimal performance.

Features

• Powerful 15 amp, 20,000 rpm motor handles larger cuts in wider materials with ease
• Three-knife cutter head with 10,000 rpm cutter-head speed delivers 30% longer knife life and makes knife change faster and easier
• Two-speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chip off of the cutter head and exhausts them out of the machine
• 19-3/4 in. cast aluminum base is 2X more rigid
• Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user
• Material removal gauge and extra large, thickness scale delivers accurate cuts with every pass
• Extra large, turret depth stop allows user to return to most frequently used thicknesses with ease

DEWALT DW7352 Replaceable Knives

The DW7352 13" Disposable, Reversible Thickness Planer Knives are made of M2 laminated tool steel for long-lasting sharpness. Machined locator holes provide easy alignment of knives on cutter-head during knife change.

• M2 laminated tool steel stays sharper and lasts longer
• Machined locator holes help users align knives on cutter head during knife change

Product description

Compatible with: DW734 Type 1, DW735 Type 1, DW735X Type 1

• Genuine, OEM Dewalt Replacement Part
• Dewalt replacement sprocket, part number 5140010-81
• Compatible with: DW734 Type 1, DW735 Type 1, DW735X Type 1

User questions & answers

Question:	Are these the two sprockets that drive the rubber rollers on my DW735 planer
Answer:	Metal
Question:	Would these work on a delta 22-540 planer
Answer:	~9/16
Question:	Is it made out of plastic or metal
Answer:	The DW7342 has 120V and the wattage is 1,800.
Question:	What's the inside diameter (without the notch
Answer:	One speed: Three-knife cutter head with 10,000 rpm cutter-head speed provides 96 cuts per inch, one of the finest finishes of any portable planer

Product description

Includes 5140010-73 WrenchNew, Bulk PackedGenuine OEM replacement partConsult owners manual for proper part number identification and proper installationPlease refer to list for compatibility Compatible with : DeWALT: DW734 Type 1 12-1/2 inch , DW735 Type 1 13 inch , DW735X (Type 1)

• Includes Wrench
• New, Bulk Packed
• Genuine Dewalt Replacement Part
• Consult owners manual for proper part number identification and proper installation
• Please refer to list for compatibility

User questions & answers

Question:	What size is this torx wrench
Answer:	No idea. Call DeWalt.

Product description

Includes 5140010-90 Indicators. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: DeWALT: DW735 Type 1 13 inch , DW735X Type 1 13" .

• Includes 5140010-90 Indicators
• New, Bulk Packed
• Genuine DeWalt Replacement Part
• Consult owners manual for proper part number identification and proper installation
• Please refer to list for compatibility

Product description

This is an O.E.M. authorized part. Fits various BLACK AND DECKER models. OEM Part Number 514001148.The product is manufactured in United States.

• This is an O.E.M. authorized part
• Fits various BLACK AND DECKER models
• OEM Part Number 514001148
• This is a DEWALT replacement part
• Part Number 514001148
• This is an O.E.M. part

User questions & answers

Question:	What hose size can you use with this
Answer:	No, this is used for the DW735 planer.
Question:	will this work with my DWS780 miter saw
Answer:	the chip exhaust on the D735 is more than adequate. i just hook up a 4"hose and shoot it outside thru 12' of hose. my problem is keeping it contained cause the exhaust is so powerful.
Question:	Will this work with the dwe7491 table saw
Answer:	I doubt it. It is my understanding that these are specific to the Dewalt 13-inch planer. Infinity Cutting Tools make high-quality blades for a lot of applications and may have something that fit the Craftsman if you can't find the Craftsman part.
Question:	When using with the D735, do you need suction or can you just daylight the 4" hose and just shoot the sawdust outside
Answer:	don't know for sure but I doubt it

Product description

The DEWALT DW7352-2 13-inch heat treated double sided replacement planer knives replace the blades in the DEWALT DW735X 13-inch planer. The M2 laminated tool steel stays sharper and lasts longer than conventional knife materials, while the vacuum heat treatment provides a longer blade life -- giving you more time before you need to stop work to flip to the second side. They're manufactured with an improved grinding process that provides a longer life with fewer nicks. The machined locator holes will also help you align knives on cutter-head during knife change. This package includes two sets of replacement planer knives. DW7352-2 13-inch heat treated double sided replacement planer knives, two pack DEWALT is a leading manufacturer of industrial power tools and accessories, including corded and cordless drills, saws, hammers, grinders, routers, planers, plate joiners, sanders, lasers, generators, compressors, nailers, saw blades, metal and masonry drill bits, abrasives, screw driving accessories and more. DEWALT tools can be found nationally and internationally wherever tools are sold. With more than 1,000 factory-owned and authorized locations, DEWALT has one of the most extensive service and repair networks in North America. M2 laminated tool steel stays sharper and lasts longer than conventional knife materials Vacuum heat treating provides longer blade life before you need to flip to the second side New grinding process provides longer life with fewer nicks Machined locator holes help users align knives on cutter-head during knife change

From the Manufacturer

The DEWALT DW7352-2 13-Inch Heat Treated Double Sided Replacement Planer Knives replaces the blades in the DEWALT DW735X 13-Inch, Three Knife, Two Speed Thickness Planer. The M2 laminated tool steel stays sharper and lasts longer than conventional knife materials. Vacuum Heat Treating Provides longer blade life before user needs to flip to the second side New Grinding Process provides longer life with fewer nicks. Machined locator holes help users align knives on cutter-head during knife change.

• Replaces the blades in the DEWALT DW735X 13-Inch, Three Knife, Two Speed Thickness Planer
• M2 laminated tool steel stays sharper and lasts longer than conventional knife materials
• Vacuum Heat Treating Provides longer blade life before user needs to flip to the second side
• New Grinding Process provides longer life with fewer nicks. Machined locator holes help users align knives on cutter head during knife change
• Great value with Two sets of knives in each Package

User questions & answers

Question:	can these blades be sharpened
Answer:	The description is confusing. There are a total of 6 blades in the package. The machine uses 3 blades on the cutter head. Therefore, there are two (2) sets of blades in the package.
Question:	It states "2-pack" is this 2 sets of 3 blades, or just two blades meaning i have to purchase 2 to get the three blades i need for my dw
Answer:	these blades do fit both 735's. the 735x is simply a pkg. deal with feed tables and an extra set of knives. same planer.
Question:	How many is there
Answer:	4 inch hose
Question:	IS there a difference between the 735 and the 735X ? do these blades also fit the
Answer:	No, this adapter is not compatible

Product features

DEWALT Planer Blades, Heat Treated, Double Sided, 13-Inch, 2-Pack (DW7352-2)

The DW7352-2 13" Vacuum Heat Treated Double Sided Two Pack Replacment Planer Knives are made of M2 laminated tool steel for long-lasting sharpness. Vacuum heat treating and our new grinding process provides long blade life with fewer knicks.

• M2 laminated tool steel stays sharper and lasts longer
• Vacuum heat treating provides longer blade life before user needs to flip to the second side
• New grinding process provides longer life with fewer nicks
• Great value with two sets of knives in each package
• Machined locator holes help users align knives on cutter head during knife change

Product description

Provide dependable support for your planer while keeping it mobile using the DeWalt DW7350 Planer Stand with Integrated Base. This set-up features strong, reliable, heavy-gauge steel brackets that are capable of supporting even the bulkiest bench top planers, and a medium-density fiberboard top that is predrilled for easy installation of any DeWalt planer. If your planer doesn't line up with the existing holes, it's easy to drill new holes to accommodate it. Perhaps the most innovative feature of this set-up is the wheel set, which can be engaged or disengaged using a foot pedal for instant portability or secure work.

From the Manufacturer

DEWALT DW7350 Planer Stand with Integrated Mobile Base

• Maximum versatility
• Durable and stable under heavy loads
• Easy movement and storage of planer and stand
• Comes in heavy duty size of 24-by-22-by-30-inches and weighs 59-pounds
• Includes mobile base, stand, hardware, MDF top, shelf

User questions & answers

Question:	When measurements are given, is it length x width x height
Answer:	Used both of mine in a tent and they did not damage the tent floor.
Question:	how tallis it
Answer:	I used a wet cloth to clean, so convenient
Question:	Would the stand height be appropriate, and is it sturdy enough for mounting a bench-top drill press
Answer:	Yes
Question:	What are the exact dimensions of the "foot print" of this stand
Answer:	No , but you can use inside a tent.

Product features

DEWALT Planer Stand with Integrated Mobile Base

The DW7350 Mobile Thickness Planer Stand is constructed for durability and stability under heavy loads. Ideal for easy movement and storage of planer and stand.

Features:

-Maximum versatility.

-Durable and stable under heavy loads.

-Easy movement and storage of planer and stand.

Product description

This is an O.E.M. authorized part. Fits various BLACK AND DECKER models. OEM Part Number 514001000.The product is manufactured in United States.

• This is an O.E.M. authorized part
• Fits various BLACK AND DECKER models
• OEM Part Number 514001000
• This is a DEWALT replacement part
• Part Number 514001000
• This is an O.E.M. part

User questions & answers

Question:	Dose this item also have the bottom of it connected
Answer:	The dimensions are one inch by one inch by one inch. It would not have been tested with the Ryobi planer and is not recommended for use with it.
Question:	Does this fit dw733 dewalt planer
Answer:	No this does not come any seals it comes as a picture shows just the shroud. no screws no seals no springs no nothing.
Question:	Can you tell me the dimensions of the unit please especially the length. Im hoping it fits my ryobi ap1300 planner
Answer:	Absolutely. I sharpen mine multiple times. Depends how bad they are now many times you can but check out the jig I have. https://www.ebay.com/itm/Planer-Jointer-Blade-Sharpener-Kit-15-Made-In-USA-Hardwood-w-FREE-SHIPPING/163554087945 perfect angle every time and doing it at home makes it worth the money.
Question:	does this come with the seals
Answer:	DW735 uses 3 blades this is 2 sets of 3 blades in each set, I got these because they are heat treated to last longeer

Product description

This is an O.E.M. authorized part. Fits various BLACK AND DECKER models. OEM Part Number 514000019.The product is manufactured in United States.

• This is an O.E.M. authorized part
• Fits various BLACK AND DECKER models
• OEM Part Number 514000019
• This is a DEWALT replacement part
• Part Number 514000019
• This is an O.E.M. part

User questions & answers

Question:	Does this work with the dewalt 733 planer
Answer:	This is the complete shroud
Question:	Is this compatible with the dw
Answer:	No, this only fits the dw735x planer. This is a direct replacement for the planer.