13 best 6 hole saws

Product description

Spyder Rapid Switch and Rapid Core Eject Hole Saw System is a faster, easier and smarter hole saw system  The New Spyder Hole Saws with patented, innovative Rapid Switch and Rapid Core Eject features make cutting holes a snap. Just push the button on the blade's integrated arbor to move the hole saw on or off the pilot drill. Push the button again and slide back the adapter to take out the plug. You can even cut holes at an angle and easily enlarge existing holes. No other system is so efficient. With Spyder Rapid Switch and Rapid Core Eject features, it's the most efficient hole saw system ever made. You can change diameter with one click and Quickly install or remove saw diameters. Just push the button to slide one hole saw off and slide another one on. To drop out the core you simply push the button and slide the blade back to remove the plug. No screwdriver required. You can even cut at an angle, just click and pull the hole saw back to extend the pilot drill's length enough to cut at an angle. Release to complete the hole. You can also enlarge holes that were drilled too small, just use your hole saw as a guide to turn a small diameter hole into a larger one by using a wider diameter saw.

• New Rapid Core eject holes saws allow you drop out the core at the touch of a button
• Made with tough bi-metal steel
• Variable tooth pitch guarantees a fast and clean cut through all thicknesses
• Cutting depth of up to 1-7/8"

User questions & answers

Question:	Will this cut through the plastic of an Igloo cooler
Answer:	I would think it would , you may need to put a piece of wood on the back side of cooler to keep the center drill bit in one place , (so it will not wonder) , hope this helps you.
Question:	Will the arbor from my existing 6” hole saw fit this
Answer:	I don't know what size arbor you have , but this fits my standard hole arbor just fine , they should be standard sizes , unless you buy a cheap small circle hole bit set-RJ.
Question:	Can it cut through stucco
Answer:	No. I bought this expecting to get a spyder tarantula hole saw bit. After 20 minutes of trying to cut through the stucco and concrete of the wall, all I ended up with was a very hot, dull hole saw bit.
Question:	What does this attach to? Not understanding how it works, sorry. Thanks for feedback
Answer:	It attaches to a Dewalt DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch – 6 –Inch) you need to use a ½-Inch drill with this size Mandrel. I use it to cut 6-Inch Holes through ½-Inch 5/8-Inch and 6-Inch Plywood. I find it best to run my drill at a very slow speed, first in reverse just to score the wood them run it forward at a very slow speed applying light downward pressure on the drill. This technique works great for cutting 6-inch holes in the cornhole boards that we build.

Product features

Spyder - Professional Bi-Metal Hole Saws

High-quality bi-metal band combines the flexibility of a spring steel backing with the enormous wear resistance of high-speed steel. Each tooth tip is made of hardened high-speed steel, so they're extremely durable and provide fast, clean cuts in the toughest materials.

Positive and aggressive tooth rake angle - Provides smooth chip clearing in a wide range of applications and materials, for maximum penetration and fast, deep cuts.

Variable Pitch and Set - Excellent chip clearing in deep-cutting applications and evenly distributed cutting load helps ensure smoother cutting and longer tooth life.

Spyder's Rapid Core Eject Hole Saw Arbor System - Sold Seperately

Cut up to 5X Faster with Spyder's patented Rapid Core Eject Hole Saw System! Designed to drop out the core at the push of a button, cut at and angle, and enlarge holes, this arbor system will make cutting holes effortless. All Rapid Core Eject arbors are universal so you can use with other hole saw brands that are already in your tool box.

SPYDER ITEM# 600634 - Hex 10 High Speed Steel Arbor (Wood, Metal, Plastics) - Use with Spyder Hole Saws 1-1/4" and Above. Fits 1/2" Rotary Drills. SPYDER ITEM #600634.

Spyder's Rapid Core Eject Hole Saw Arbor System - Sold Seperately

Cut up to 5X Faster with Spyder's patented Rapid Core Eject Hole Saw System! Designed to drop out the core at the push of a button, cut at and angle, and enlarge holes, this arbor system will make cutting holes effortless. All Rapid Core Eject arbors are universal so you can use with other hole saw brands that are already in your tool box.

Hex 8 High Speed Steel Arbor (Wood, Metal, Plastics) - Use with Spyder Hole Saws 3/4" up to 1-1/8". Fits 3/8" Rotary Drills. SPYDER ITEM #600637.

Product description

A must-have tool for pros and Dyers alike, the Milwaukee hole saw is designed specifically to install 6” recessed light fixtures that require a 6-3/8” hole. Equipped with carbide grit, the saw is ideal for cutting through abrasive materials, such as drywall, plaster, acoustical tile, wood, and stucco with mesh. Manufactured for superior performance, it’s made with a continual rim for clean cuts and won’t tear material, leaving a clean finish. Additional features include a solid, Welded construction to provide accurately sized holes and an open back design for easy Plug removal.

From the Manufacturer

Using a Tungsten Carbide Grit edge, Recessed Light Hole Saws cut through Drywall, plaster, acoustical tile, ceiling tile and stucco with wire mesh. All hole sizes are available for standard Recessed Lights, 4-3/8 inch through 6-7/8 inch. Recessed Light Hole Saws have a cutting depth of 1-3/4 inch. Select arbor with a 5/8-18 thread and a Compact Hole-Shooter with 1/2 inch capacity or larger. One per package

• 6-3/8” hole saw
• Use to install recessed light fixtures
• Able to cut through abrasive materials
• For best results, 600 RPM is recommended
• 6-3/8 in. diameter 1-3/4 in. depth of cut
• Carbide grit cutting surface
• For cutting through drywall, plaster, acoustical tile, ceiling tile and stucco with wire mesh backing

User questions & answers

Question:	Will this cut through wood cabinet
Answer:	No it is not a knock off brand. It is the real deal at a great price.
Question:	Will this cut thru hardyboard/concrete board
Answer:	3/4 in, 7/8 in, 1 in, 1-1/8 in, 1-1/4 in, 1-3/8 in, 1-1/2 in, 1-3/4 in, 2 in, 2-1/8 in, 2-1/4 in, 2-1/2 in, 2-5/8 in, 3 in, 3-1/4 in, 3-3/8 in, 3-5/8 in, 3-3/4 in, 4-1/8 in, 4-1/4 in, 4-1/2 in, 4-3/4-in
Question:	It doesnt come with an arbor
Answer:	No. Does not cut concrete. Cuts metal and steel.
Question:	Will it cut Fiberglass like on a boat
Answer:	Given the mixed answers, i feel the need to contribute. Seemingly, it is almost or barely capable of drilling through a 2x4 hot dog style (which is actually 3 1/2 inches). Even if it is unable, it is close.. so I would recommend loosening the hex screw and shifting the pilot bit up a quarter or half inch, then of course, tighten the set screw. This will penetrate the other side which you can then go to, and use that hole to center your drill to complete the cut. Very easy, very effective
Question:	Is this suitable for cutting through fiberglass or will it cause splitting/cracking
Answer:	I use our outdoor fan to blow air in it then when you roll the end up it gets tight. Or you can run in a circle to get the air in it and then when you roll the end up it gets tight. We love ours. We have had it for about 3 years now and it has been awesome to have with the kids.
Question:	What is the depth of the cut it’s capable of drilling in one pass
Answer:	Probably depends on the age of the kids. But they are simple to set up if you use a fan of some sort like a heater or air conditioner vent or something with a small flow. Kids could set them up and I don’t see any issues with kids using them. Burn I wouldn’t put an infant unsupervised in it for suffocation concerns
Question:	Does it cut through stucco with wire mesh backing
Answer:	Yes! These loungers are equipped with a pin that goes into the ground for sturdiness.
Question:	will it cut through 3/8" aluminum sheet metal
Answer:	Yes! All of our loungers come with a handy stake to hold your Chillbo Baggins Lounger down even in the windiest of conditions.

Product description

Fast and easy starts, even in the hardest materials like porcelain and granite. Quick Change universal hole saw system allows change to any size or type of hole saw in seconds. For use only with machines designed for wet sawing and on a GFCI-protected circuit.

The Bosch diamond grit hole saw is one of the latest additions to the Bosch hole saw product line. The hole saw features vacuum brazing technology for faster cutting and longer life than competitive products. As with Bosch's entire line of hole saws, these products are part of the patented Quick Change universal hole saw system, which lets you change hole saws in seconds. Bosch's new diamond grit hole saws start fast and simple, every time.

• Vacuum-brazed diamond grit cuts faster and lasts longer
• Segmented teeth reduce debris and heat
• AutoStart pilot bit is spring-loaded, retractable shaft allows walk-free cutting without a pilot hole
• Pilot bit offers unique grind that starts holes accurately every time
• Plastic case
• Set includes: mandrel, AutoStart pilot bit, hole saws: 1/4 inch, 5/16 inch, 3/8 inch, 5/8 inch, 1 inch, 1-3/8 inch, 2 inch, 2-1/4 inch, 2-1/2 inch

User questions & answers

Question:	Can I use this product on brick
Answer:	9/16" at the very top, 7/8" at the base.
Question:	Need to cut thru-holes in ceramic tile over 3/4" thick mortar bed - will same hole saw also cut thru the concrete
Answer:	Made in China
Question:	what are the sizes of the bits
Answer:	The specification listed is 57 mm.
Question:	You have to buy a separate mandrel to use this? What is the distance from flat hex shank side to side
Answer:	23/8" inches

Product features

Vacuum-brazed diamond

Cuts faster and lasts longer.

Segmented teeth

Reduce debris and heat build-up.

Fast and easy starts

Even in the hardest materials like porcelain and granite.

Integral Quick Change adapter

Changes hole saw sizes and types in seconds, easy material plug removal.

Product description

Southwire's Bi-Metal hole saws are optimized for cutting steel, 6-3/8" diameter. Heavy-duty construction provides precise, fast cutting of steel, aluminum, brass, wood, plastic, and drywall. Size recommended for most major brands of 6 inch (152 mm) recessed lighting fixtures.

• HEAVY DUTY: Bi-metal hole saw for heavy-duty, fast cutting of steel, aluminum, brass, wood, plastic, and drywall. 6-3/8" size ideal for recessed lights.
• USE WITH: for use with hole saw arbor (Southwire model number: ABS1/2)
• EASY EJECTION: large slots for easy slug ejection
• FAST CUTS: unique teeth configuration for fast removal of cutting material
• RECESSED LIGHTS: recommended for most major brands of 6-inch (152 mm) recessed lighting fixtures
• MULTI USE: for use in drywall, ceiling tile, steel, wood, plastic and stainless steel
• CUTTING DEPTH: This bi-metal hole saw cuts 38 mm/1.50 in

User questions & answers

Question:	What is the depth of cut
Answer:	I cut through our 3/4” pine board ceiling with no problem. I would think you could cut up to 1” thickness.
Question:	Will this fit a lenox or mill. Shank
Answer:	Yes
Question:	Can this hole saw be used with a Milwaukee 3/8 quick change arbor
Answer:	Don't buy this lol it ate all it's teeth off after a few uses. The dewalt 60volt bore saw is awesome. And Milwaukee big dawg. Or hole hawg* whatever it's called. Unless you're strictly using for sheet metal and drywall it won't last.
Question:	Will this cut 1/4 inch panelling
Answer:	Yes.!
Question:	Does this fit into a press drill without any other attachments
Answer:	I use it with my hand held dewalt hammer drill, but I assume it would fit
Question:	Does Starrett 4 1/4" hole saw bit, $69.82, include an arbor to fit drill. or is arbor to be a separate purchase
Answer:	separate, but this thing is worth every penny. I cut a 100 holes through 3/4 plaster and performs as new still. Cut through CBS block as well
Question:	Does it come with a pilot bit? How do you chuck it up
Answer:	Hello JJB,I am short on time at the moment or I would look this up for you. But, you need the guide bit and chuck for this. They have a new quick release that enables you to take it on and off with your hand. I think it was the Dewalt that I bought. It is a little stiff but, if kept well lubricated, it works good. You need a strong grip. I use these hole saws for cutting holes in marble and granit for faucet holes. I also use larger sizes up to 4" for the toilet hole and they all work well. Good luck.
Question:	What is the depth? i want to use this with a dust bowl to cut holes for recessed led
Answer:	I believe it was 2 inches...I used it to install a drain thru my approx 4 "sidewalk & I had to basically hammer out the bottom 2 "

Product features

Starrett Diamond Grit Holesaw

High performance hole saws for drilling small diameter holes in many non-metallics. These Diamond hole saws are the ideal solution for the toughest cutting situations.

Southwire Tools and Equipment: Built For Durability. Built For Reliability. Built For Work.

Southwire Tools & Equipment provides a comprehensive line of top-quality hand tools, meters, testers, lighting, extension cords, temporary power solutions and contractor equipment. Built for durability. Built for reliability. Built for work.

Product description

Klein's Bi-Metal Hole Saws are optimized for cutting steel. The blades provide the fastest, most consistent and longest lasting cutting on the market today. Heavy-duty construction includes thicker 5 mil back plates to stand up to abuse much better. For drywall, ceiling tile, steel, wood, plastic, stainless steel. Made of heavy-duty steel. Perfect for drilling holes to hold 6-Inch recessed light fixtures. Use with Klein Tools Arbor (Cat. No. 31906). Sold separately. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Cuts precise holes in drywall and ceiling tile
• Recommended for most major brands of 6-Inch (152 mm) recessed lighting fixtures
• For use in drywall, ceiling tile, steel, wood, plastic and stainless steel
• Heavy-duty steel construction
• Bores through 2x4s in a single pass

User questions & answers

Question:	Will a Lenox arbor work
Answer:	Yes, not sure if a quick release would work tho
Question:	Dewalt arbor work
Answer:	There is no reason why a 1/2” dewalt arbor shouldn’t work
Question:	Can this be used in boring stucco walls
Answer:	No, It would dull very quickly. I recommend one with carbide teeth.
Question:	Can I get
Answer:	Yes

Product description

LENOX Multi-Material carbide tipped hole saws deliver up to 6X Faster Drilling Speed for rough-in applications.

• UP TO 6X FASTER*: Large carbides and aggressive tooth design cuts through material faster for rough-in applications*
• RIPS THROUGH NAILS**: High performance carbides are brazed to the cutting edge for durability and to help prevent tooth loss when hitting nails or drilling through abrasive materials
• VERSATILE DESIGN: Carbide teeth are optimized to cut through a variety of materials including Nail Embedded Wood, Concrete Block, Fiber Cement, and Brick
• DRILLS THROUGH THICK MATERIALS IN ONE PASS: Tall body easily drills through 2X dimensional lumber with up to 3/4" sheathing attached
• FAST, EASY PLUG REMOVAL: Deep body slots allow for easy plug removal

Product description

Freud DHS6000 Diablo High Perf Hole Saw 6"x2-3/8"

• 6-inch sanding disc
• Arbor sold separately
• 60 millimeter (2-3/8-inch) cutting depth for deeper holes in one pass and increased productivity
• Snap-Lock mandrel system for a quick and easy change with no down time
• One-size fits all Snap-Lock mandrel fits all Diablo hole saws from 5/8-inch to 6-inches in diameter, Imported

User questions & answers

Question:	Is this available in
Answer:	Yes
Question:	does it need an additional parts or can this just be inserted to the chuck of the drill
Answer:	You need a mandrel that snaps or screws into the hole saw. This is what your drill will chuck to. Mandrels can be switched between hole saws.
Question:	I need to cut 38 holes 6 inches dia stucco on dense glass stucco board will this product do it ? 1/8 stucco to 1/4 stucco on green board sheet roc
Answer:	I'm guessing that it will. The stucco will probably dull it sooner then drilling wood, but there is not much stucco that you will actually de drilling. My tip: Do not use a cordless drill. There is a lot of torque in starting. Use a heavy 1/2" electric drill with a chuck key. The key is "going slow and steady". This is the only way to do this many holes. I just drilled 20 holes into plywood for corn holes games and going fast creates a wobbly start. Have fun using it. Get the 1/4" drill and the drill sleeve with it.
Question:	I need to remove 200 signs in a stadium that we’re installed in concrete with Drive Rivets. I’d like to drill the sign and leave the river alone
Answer:	That should work. However, you would need some way of preventing the hole saw from trying to cut into the concrete. Perhaps you could make a collar by drilling a hole in a block of aluminum and attaching it with a set screw. Curious why you don't just drill out the rivits. It would be much faster and make less mess.

Product description

Carbide cutting edge easily cuts through ceiling tile and drywall. And also drywall. Recessed lighting kits are available for 4-Inch, 5-Inch and 6-Inch lighting fixtures.

• Carbide cutting edge easily cuts through ceiling tile and drywall
• And also drywall
• Recessed lighting kits are available for 4-Inch, 5-Inch and 6-Inch lighting fixtures
• Package dimensions:12.6"L x 11.61"W x 16.34"H

User questions & answers

Question:	Is this hole saw 6 inches or
Answer:	It is 6 3/8” in diameter
Question:	Will this cut through aluminum soffit to install a bathroom exhaust vent
Answer:	Most likely.
Question:	will this cut through Hardi-Board (cementitious
Answer:	Yes it will. These are great for cutting hardi board.
Question:	What is the actual diameter as a 6 inch light can needs a 6-1/4 to 6-3/8 inch hole in the ceiling
Answer:	Hi,Actual hole size is 6 3/8". Thanks for checking. MC Distributors

• HIGH QUALITY, DURABLE Diamond Coated Hole Saw Tool True 6 inches Diameter
• STANDARD 3/8 inch Shank Use with and standard electric or cordless drill.
• PROFESSIONAL Quality Tool for Drilling True 6 Inch Holes in Plaster Ceilings Walls, Tiles, Glass, Marble, Granite, Quartz, Ceramic, Porcelain
• TRUE 6 Inch - Hard to Find Diamond Tool for DIY Kitchen, Bathroom, Shower, Ceiling Light Installation Projects
• Use water for quartz, tile, marble type of material to prolong the tool life, these tools do not need a center pilot drill. DRILAX Quality - We are here to help.
• You can make a guide out of a piece of 10 x 10 plywood.

User questions & answers

Question:	what is the hole actual diameter
Answer:	If you secure the jug and have a way to constrain the hole saw, yes this could work. Without a way to keep the hole saw on the spot, it would be very difficult. You could make a guide out of plywood.

Product features

Drilling Marble, Stones, Granite

Clean holes in Marble, Granite, Quartz, Stones without Cracks

High Quality Diamond Hole Saws

Drilax Diamond Hole Saw

Drilling Perfect Holes in Tiles

Drilax Diamond Hole Saw for Drilling Perfect Holes in Tiles - Toilet Installation on Floor or Faucet Valve Installation on Wall Tiles

Drilling Wall and Floor Tiles

Actual Bathroom Renovation with Drilax Diamond Drill Bits for Drilling Wall or Floor Tiles, installing Shower Doors, Faucets, Drain Holes

Drilax Diamond Hole Saw

Drills through tiles, porcelain, ceramic, glass, quartz, etc.

Great Tool for Renovation

DESIRED RESULTS in Granite, Ceramic & Porcelain Tiles, Glass, Marble, Slate, and many types of Stones.

High Quality Diamond Hole Saws

Special Design - Standard Drills

Perfect Holes in Tiles

Clean, Perfect Holes in Tiles for Bathroom and Kitchen Renovations

High Quality Diamond Hole Saws by DRILAX

Increased Depth of Cut - Over 1 inch

Drills Through Cement Boards

Drills perfect holes...

Product description

Starrett high performance triple chip tungsten carbide tipped hole saw. A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten carbide tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination and suitable for use in mains and battery operated tools. 1-5/8-inches cutting depth. 3 teeth per inch. Available in black color. A2/A10 Arbor.

• A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass
• Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster
• Tungsten carbide tipped teeth for outstanding cutting performance and product durability
• Will cut nail embedded wood or virtually and wood and metal combination and suitable for use in mains and battery operated tools
• 1-5/8-inches cutting depth

Product description

The Lenox Tools Bi-Metal speed slot hole saw with T3, 6"-152mm, has enhanced tooth geometry that cuts 50% faster than previous LENOX hole saws. Twice as durable as our previous generation when cutting through metal, this Bi-Metal hole saw features thicker walls to minimize tooth loss and improve durability. A staircase speed slot has a wide slot placed low on the hole saw and multiple leverage points to make it easy to work plugs out with a screwdriver. This design effectively removes sawdust and chips and helps prevent plugs from becoming stuck in the saw. 10% Taller than previous models, it delivers cleaner cuts through two-by lumber.

• 2x more durable with 50% longer life than previous Lenox hole saws
• Increased wall thickness improves durability and minimizes tooth loss
• Optimized tooth design penetrates metal with ease
• Larger, sharper teeth for faster cutting
• SPEED slot staircase design for easy plug ejection

Product features

Twice as Durable

With teeth that cut 50% faster than our previous hole saws, the new LENOX Bi-Metal Hole Saws with T3 technology last twice as long even when cutting through metal for unbeatable performance and unmatched efficiency. These hole saws feature the innovative Speed Slot design to make plug ejection fast and easy.

Note: For more information, please visit the official website or call the Customer Care Expert.

2X More Durable

LENOX Hole Saws with T3 technology easily cut through metal and still last twice as long as previous generation hole saws.

Note: For more information, please visit the official website or call the Customer Care Expert.

Thicker Walls

These hole saws are constructed with thicker walls to maintain integrity longer and lose fewer teeth on tough materials than traditional hole saws.

Built to Last

LENOX Hole Saws with T3 Technology are 50% more durable than previous generations for long-lasting performance.

Note: For more information, please visit the official website or call the Customer Care Expert.

Product description

Available in 19 sizes to get any number of jobs done fast! Aggressive carbide tipped teeth with deep self-cleaning gullets easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding (including popular James Hardie and CertainTeed fiber-cement products). Quick-change pilot drills with a built-in, tight gripping hex shank are available in both high speed steel and carbide tipped designs. The extra length of these pilot drills allows the drill point to extend 1" (25 mm) beyond the hole saw's teeth for cutting uneven surfaces like lap siding. Cutting a hole in the wall plate area of a house clad with fiber-cement siding is a breeze! A generous 2-1/4" (57 mm) hole saw cup depth is also versatile for cutting through a variety of other wall cross sections. A quick-connect/quick-release arbor design easily attaches or changes out the pilot drill or hole saw. The unique quick release feature ejects saw plugs with ease!

• Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding
• These carbide tipped hole saws feature a quick-connect/quick-release arbor design and quick change pilot drill
• Set up in 3 easy steps
• Easy cutting in uneven surfaces.
• Generous 2-1/4-inch (57 mm) hole saw depth

User questions & answers

Question:	Will it cut in concrete
Answer:	We use it to cut concrete siding, thicker than that I would say no.

Product description

Bushing; 1-1/4 to 1-9/16 inch hole saw used on item

From the Manufacturer

Faster easier slug removal. Drill pilot hole without saw, one. Eliminates the bit when saw crashes into the steel. Provides better ergonomics reduced stress on wrist arm and hand. Eliminates obstructed view from hole saw. Only one arbor required from 7/8 to 6 (7/16 shank recommended for hole saws above 2 1/2 ). Works with recessed light and carbide grit hole saw products as well. Adapters re usable to minimize costs. Universal works with any brand hole saw.

• Adapters re-useable to minimize costs
• Universal, works with any brand hole saw
• Faster, easier slug removal
• Only one arbor required from 7/8-inch to 6-inch
• Allows for rapid mounting or removing of hole saws

User questions & answers

Question:	I know what it is designed for but Is this 1/2" - 20 to
Answer:	The I.D. 1/2" 20 the O.D = 5/8-18.
Question:	does it come as pictured with two in the box
Answer:	Bennet, did you not see the photo of actual item with 5 in the picture? Description mentioned plural as in adapters. Then photo showed 5 bushings with text saying 5 items so no doesn't come with 1 or 2.
Question:	Is this 1/2" - 20 to
Answer:	This is designed to allow small arbors to accommodate hole saws larger than 7/8". Works well. Can be difficult to remove bushing if not snug when you start