12 best sigma tile saws

• Measurements are in inches
• Cuts up to a 14 inch tile
• Cuts a 10 inch tile on diagonal
• Features a rapid positioning button for angle cuts from 0-45°
• Weighs less than 5 pounds and is very light, practical and precise.

User questions & answers

Question:	What is the best rated tile cutter
Answer:	They are rubber - doubt they would last too long on rough surface. I use them in on turf only.

Product description

4" Porcelain saw Blade

Size:4inch

Arbor:22.23mm

Thickness:1.2mm

Segment Height:10mm

Blade Length:105mm

Application:Porcelain tile, Granite ,Marble,stone ,ceramic

• 5Pcs/Box
• Universal for dry or wet cutting
• X teeth offer fast and smooth cutting
• High temperature extraction diamond blade has a long service life.
• Super thin porcelain saw blade with free chips for cutting,Match with hand-held machine

User questions & answers

Question:	What is the RPM for this blade
Answer:	Hi the black widow is designed to cut Ceramic, porcelain marble and granite only you will need model 6-7006GLQ this blade is designed to cut glass thank you
Question:	What is the return policy
Answer:	Advance to about 11 minutes and watch from there: https://youtu.be/liZLJrFseyY
Question:	Hi i was trying to used this blade on my 7 inch chicago electric bridge tile saw the saw keeps cutting out once the blade ii on the saw (whats wrong
Answer:	Yes use plenty of water as usual
Question:	What is the return policy
Answer:	Back in the '70's a bottle cutter was the new hot arts and crafts item. It used a cheep class cutter attached to a pivot point. Once you scored the outside, you used a thick wire in a "S" curve to tap on the cut line until a crack stars and progressed all the way around. It made a nice sharp cut albeit too sharp. I think you can still find these tools on craft sites."

• Universal for dry or wet cutting.
• This product is a hot-pressed sintered saw blade, which has a longer life.
• Super thin X teeth offer fast and smooth cutting.
• Available for cutting porcelain, ceramic tiles, marble, granite and sandstone.
• It can be installed and used on various angle grinders, marble cutter and tile saw with a 7/8"or 5/8" arbor.

Product features

Super Thin Diamond Tile Saw Blade

Size: 4.5"x.048"x.395"/10mm

Arbor: 7/8"-5/8"

Segment height: .395"(10mm)

Thickness: 1.2mm

Application: Porcelain, Ceramic tiles, Granite, Marble, Stone

Applicable models: Angle grinders, Marble cutter and Tile saw with a 7/8"or 5/8" arbor

Product description

★Brand name:Stylish Y&I.

Our brand means that：You and I,everybody is a unique individual. All forces come together and it is a powerful group. You deserve to have all the best.

★Outer Diameter：105mm /4 inch

★Arbor:7/8",20mm,5/8" (22.23mm-20mm-15.88mm)

★Core Thickness:1.2mm; Base thickness:0.8mm

★Segment Height:10mm

★Rpm:14500

★Quality:A class

★Universal cutting:dry and wet cutting

★All our products are under strict quality control.

★Our tile saw blades offer a faster cut rate at a constant depth, which is ideal for Porcelain tile, ceramic,Granite ,Marble,Vetrified tiles and so on.

Guarantee：

★Friendly Customer Service.Any Questions,Please Feel Free to Contact us.We Will Respond to You Within 12 Hours and Give You a Good Solution.

• ★Size:105 x 10 x 1.2 x 22.23 mm; Outer Diameter:105mm /4 inch; With reducer washer for arbor:7/8",20mm,5/8" (22.23mm-20mm-15.88mm); Thickness：1.2mm
• ★Hot-pressing Blades Designed for cutting ceramic,porcelain tile,granite, marble,vetrified tiles,ect.
• ★Tile blades:outer edge is plenty strong.Well balanced well made. Smooth cutting and clean.Long-lasting performance and minimal chipping.
• ★Wet or Dry Cutting.Premium-grade,Super Thin Porcelain Saw Blade with Free Chips For Cutting,Match with Hand-held Machine.
• ★Friendly Customer Service.Any Questions,Please Feel Free to Contact us.We Will Respond to You Within 12 Hours and Give You a Good Solution.

• Universal for dry or wet cutting
• X teeth offer fast and smooth cutting
• Super thin porcelain saw blade with free chips for cutting,Match with hand-held machine
• Available for cutting porcelain,ceramic tile,granite, sandstone quartz ect
• Size:125 x 10 x 1.2 x 22.23 mm,Thickness:1.2mm,Outer Diameter:125mm / 5 inch (WHAT IF I DON’T LIKE-If you are not completely satisfied with your purchase for ANY reason, simple return Diamond Tile Blade to us and you will receive 100% refund OR RESEND, no questions asked.)

User questions & answers

Question:	How thin..what is the kerf..of the "super thin" goyonder 4.5 " tile blade
Answer:	I do not know for sure. If I had to guess, I would think it should work. I used for cutting both porcelain tile (pretty glass like), and masonary.
Question:	Will this work for 1-1/8" Travertine pavers
Answer:	I don't think that is what this is intended to do at all... it is the blade. I could be wrong, but I use it to cut brick and tile.
Question:	Is there an option for a thicker blade? My tile saw has a safety shield that is held by an .063 thick metal bracket and this blade is .055" thick
Answer:	No! Just at the wet saw!
Question:	Is the arbor 7/8 or
Answer:	It made for small jobs. Mine didn't last very long. The motor is slow and stalls out on long cuts.

Product features

Universal For Dry or Wet Cutting

Universal For Dry or Wet Cutting.Using water when cutting with GoYonder Diamond saw blades, which helps the blades longevity.The water cools down the blade from heating and decreases the friction in the cutting zone by flushing out all the debris of the materials cut; it also reduces the dust produced from the cutting.

X Teeth Turbo Mesh Rim Design

X teeth design provides fast smooth precise clean excellent cutting performance. less dust, less vibration.which can bring higher work efficiency and economic benefits.

Super Thin Diamond Saw Blade

1.2mm super thin turbo mesh rim design not only provides faster cutting, but also ensures a longer service life.

Wide Application

GoYonder super thin diamond blades are designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate and cement backer board.It will be perfect partner for tile installer and general home made DIYers.Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).

Product description

Outer Diameter(mm):115mm /4.5 inch

Segment Height:10mm

Core Thickness(mm):1.2mm

Rpm:8000-11000

Quality:A class

Arbor:7/8"-5/8" (22.23mm-20mm)

Cutting:dry and wet cutting

Application:Porcelain tile, Granite ,Marble,stone ,ceramic





Our main products are diamond segments, saw blades, wire saws,diamond abrasive, flexible diamond polishing pad, floor polishing pads, cup wheels, profiling wheels, CNC-profiling wheels, drill bits, finger router bits, brushes, abrasive blocks and electroplated tools, with various specifications.

All these products have reached internationally advanced standard and are widely used for cutting, grinding or polishing granite, marble, concrete, asphalt, refractory, porcelain and glass.

All of our products are under strict quality control.

• Universal for dry or wet cutting
• X teeth offer fast and smooth cutting
• Super thin porcelain saw blade with free chips for cutting,Match with hand-held machine
• Available for cutting porcelain,ceramic tile,granite, sandstone quartz ect
• Size:115 x 10 x 1.2 x 22.23 mm,Thickness:1.2mm,Outer Diameter:115mm /4.5 inch.Suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor.

User questions & answers

Question:	Can this cut through a concrete slab
Answer:	Yes, It can cut through the concrete slab easily.
Question:	Will this blade cut through roof tile that is approximately 1/2” thick
Answer:	Yes it will.like a hot knife cutting through butter. Get a hydro sponge same kind of sponge tile setters use.get some water on the sponge while your cutting let spong touch the side of the blade as your cutting.What this does is keeps the blade free of the fine dust and will also prevent small chipping of your roof tile..you will be impressed on how well these blades cut..make sure you use the sponge.if u don't what happens is the diamonds on the blade will get clogged up with fine dust and won't cut near as clean. Hope this info helps
Question:	will this cut glass
Answer:	This is not worth buying. The cutting edge is dangerous, as it separates when cutting
Question:	The Rubi blades of similar design are not designed to cut a radius according to the distributor I feel with. Are these
Answer:	The blue blades suck, the edge was chipping off after like4 or 5 cuts. Don’t waste your money. I bought 6 , still have 5. They are dangerous, not worth getting hurt. The red ones are awesome. Buy those Jerry

Product features

Universal For Dry or Wet Cutting

Universal For Dry or Wet Cutting

Using water when cutting with GoYonder Diamond saw blades, which helps the blades longevity.The water cools down the blade from heating and decreases the friction in the cutting zone by flushing out all the debris of the materials cut; it also reduces the dust produced from the cutting.

X Teeth Turbo Mesh Rim Design

X teeth design provides fast smooth precise clean excellent cutting performance. less dust, less vibration.which can bring higher work efficiency and economic benefits.

Super Thin Diamond Saw Blade

1.2mm super thin turbo mesh rim design not only provides faster cutting, but also ensures a longer service life.Suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor.

Wide Application

GoYonder super thin diamond blades are designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate and cement backer board.It will be perfect partner for tile installer and general home made DIYers.Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).

Product description

Sigma snap tile cutters are known as being in a league of their own for their quality. These Italian-made manual tile cutters are able to cut the hardest porcelain, snap 3/4″ glass mosaic tile into perfectly equal thirds, thick Pavers and Natural Stone, they also are more than capable when it comes to handling Marble and granite. The Sigma -45 to 45 degree locking angle mechanism allows you to lay Diagonal pattern tiles nearly as fast as you would lay down a square tile layout. A snap tile Cutter saves plenty of time on the job site when compared to the typical wet tile saw. Although wet tile saws have their distinct place in your overall arsenal of tiling tools. The lightweight Snap Cutter should be the tool of choice when it comes to all your straight cuts while the tile saw handles all your difficult, cutouts, and curve cuts.

• Weighs less than 5 pounds and is very light, practical and precise.
• It features a rapid positioning button for angle cuts from 0-45°
• Capacity Long:- 37 x 37 cm
• Diagonal capacity 25 x 25 cm
• All measurements are metric only

User questions & answers

Question:	How can I get this in inches
Answer:	Rim: Height 7mm Width: 0.60 Arbor Size: 5/8”-20mm-7/8”
Question:	Where can I get this with inches rule tape
Answer:	No!!! Strictly for use on porcelain tile and ceramic and good price point as well
Question:	I want receive it as soon as possible. Could you please let me know when does it shipping if I older
Answer:	Probably between a sixteenth and an eighth, can't measure for you exact because it's put away, good blade
Question:	Does this come metric or standard
Answer:	i have cut natural crystal with it. if you go very slowly you should be pretty happy with the smoothness of the cut. ive had some perfectly smooth ones,and 1or 2 rough,but by far,way many better than bad,its a descent blade.

Product description

Specifications:



1.Color: Silver

2.Material: High-speed Steel

3.Size(outside diameter): 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm. 25mm, 26mm, 28mm,30mm,40mm,50mm.

4.Height: About 50mm

5.Applicable Industry: Suitable for Stone, Tiles, Ceramics, Glass and Granite, etc Processing.



Advantages:



* Good Performance and long life.

* Excellent for making clean and accurate hole on glass and tile.

* Works better with a electric drill (Excluding in the item).



USE NOTE:



1.Start your hole diagonally, make a round trace and then hold drill straight.

2.Always use lubrication (water), otherwise the diamond core drill will bur.

3.Low drill pressure and increased use of water lubrication will extend drill bit life considerably.

4.Not for use on concrete or for depths beyond about 1/2"

• Tile Hole Saw have 15 SIZES - 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm, Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone (especially for glass AND tile)
• Tile Hole Saw BE MAKE OF HIGH QUALITY NATURAL DIAMOND SAND, which is solidified by special enhanced electroplating
• NICKEL-PLATED with a diamond dust coating offers superior performance and cutting strength
• OPENING NEAT-SMOOTH, no broken edge, no tremor phenomenon, incision resistance is small AND the hole speed is very fast, easy chip evacuation and so on
• OPERATION of the Tile Hole Saw - Start the hole diagonally, make a round braid and then hold drill straight. Water is required for lubrication when drilling

User questions & answers

Question:	Do they come In a case or just loose
Answer:	I've never had to return a blade, so I don't know - but I imagine it's probably like other Amazon items - easy!
Question:	Do these work in a dremel tool
Answer:	I guess if you want it to wobble. Mine was junk and out of round or true causing a bad vibration. Buy a different brand and you will be fine.

Product description

Specifications:

Material: Alloy

Color: Silver

Applicable Industry: Suitable for Stone, Tiles, Ceramics, Glass and Granite, etc Processing



Package Included:

1 x Diamond Coated Hole Saw Drill Bits

• This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite, cer
• Can be used with a standard electric drill(Excluding in this item)
• Easy to use, high quality,good performance, long life - Excellent for making clean and accurate hole
• Always use lubrication (water ), otherwise the diamond core drill will burn - Start your hole diagon

User questions & answers

Question:	Will this cut steel
Answer:	the 7inch blade I ordered came 5/8 with 7/8 knockout had to knock center ring out to fit on my tablesaw just smack it out with a socket or something
Question:	Can I use this to drill glass for light fixtures
Answer:	Not sure
Question:	I make a lot of holes in wood with a 4" hole saw. I'm looking for something that will last longer. Will this work on wood
Answer:	Looks simple
Question:	I just ordered this and i dont understand why it dont have a place to put the center drill bit
Answer:	1. Is the saw powerful enough to turn a blade that size when cutting? 2. If you have a hand held saw then you might be binding the blade 3. Is the blade on backwards....i e wrong rotation

Product description

Outer :85mm

Size: 3 inch

Segment Height: 10mm

Segment Thickness: 1.2mm

• Size: 85 mm, Quantity: 2 pcs.
• Universal for dry or wet cutting.
• X teeth offer fast and smooth cutting
• Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you.
• Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade.

User questions & answers

Question:	is this wet or dry
Answer:	This come metric
Question:	can i print this ad page
Answer:	It's about an eighth of an inch it's not as thin as you might think there's a little swirlies on the side of the cutting blade make it a little wider than most thin kerf blades that actually seems to cut very well I've cut porcelain and glass with it cuts glass well that's everything pretty well really definitely not a bad blade for the price you need to cut a couple pieces of something hard first to clean the blade up before you get actual use but other than that work great
Question:	What is the arbor size and does it come with adaptor rings
Answer:	I'm sure it would. but I would highly suggest you to use a wet saw to make your cuts on travertine pavers.
Question:	Can this be used to cut stone tile
Answer:	Lovit for mackira

Product description

Peakit super thin diamond blade circular saw blade turbo mesh blade， blue/silver reversible color

SIZE: Diameter 4", Segment Height 3/8", Inner hole 7/8" or 5/8".

FEATURE:

1. Professional quality for porcelain, ceramic, granite or natural stone tiles cutting. 

2. Unique mesh rim blade, X teeth offer fast and smooth cutting.  

3. Hot pressed tile cutting disc provide long life.

4. Fits most tile saw and angle grinders with a 7/8"or 5/8" arbor. 14,500 RPM Max, available for both dry and wet cutting work.

LIFETIME WARRANTY & FREE RETURN SHIPPING - All Peakit diamond tools like Diamond Blades, Coring Bits, polishing pad, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. 

• ✔ Peakit Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you. Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal.
• ✔ Our Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade.
• ✔ This 4in tile saw blade features a 3/8" diamond rim, can be used dry or wet, fits most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor.
• ✔ It is the ideal diamond saw blade for tile installer, general contractors, home made DIYers and tradesmen.
• ♥ What you will get: fast 4in diamond blade 1 pcs, lifetime warranty against warping, cracking and material defects, superior customer service.

User questions & answers

Question:	Will this work on a Makita 9557PB angle grinder
Answer:	The shaft is 1/4” in sized. Is your dremel big enough to hold the diamond holesaw?
Question:	what size spindle 5/8 in
Answer:	The listing from Contractors Direct is in inches.
Question:	What does it mean by "reversable
Answer:	Don't no
Question:	Will this cut screws or nails
Answer:	We ship same day if order is completed by 1 ET. We have this cutter in stock. Ships from our CT warehouse

Product description

Diamond Drill Bit Set, THINKWORK 10 PCS Glass Hole Saw for Tiles Glass Ceramic Marble, 6mm -- 50mm

Why do customers choose to buy our diamond hole saw set? 1. These diamond drill bits are made of industrial grade carbon steel and have a nickel-plated coating to prevent corrosion.

The thickened diamond coating on top provides excellent cutting strength.

2.10 different drills, can meet various needs: 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm

3.Adjustable hole saw drilling guide fixture with suction cup + exquisite screwdriver.

Hole saw guide: Material: rubber base + plastic shell + steel

Two fixed modes are available: Mode 1, reverse side of adjustable plate: You can fix the hole saw with 4 bearing balls, the maximum size is 3-1 / 4 inch.

Mode 2, Adjustable plate reverse side: Place the reverse rotation plate, and then move a bearing ball to the bearing hole.

You can fix the hole saw with 3 bearing balls, the maximum size is 1-3 / 4 inches.

NOTE: 1. If you smell a burning odor, step back! Either it is too fast or the pressure is too great.

The bit you are drilling must not be exposed to high temperatures or even heat.

2. Not suitable for concrete or deeper than 1/2 inch.

3. Lubricating water is needed when drilling, which will greatly extend the life of the drill.

The package includes: 1 PC hole saw rail clamp

10 PC diamond coated drill

1 screwdriver

1 instruction manual

• 【Superb craftsmanship】These diamond drill bits are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion. The thickened diamond coating on the top provides excellent cutting strength for high-precision, smooth cuts without hemming for maximum drilling results.
• 【Ergonomic design】The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling process easier. Small holes-When debris gets stuck in the hole saw. We can use our screwdriver to pull it out. To provide you with the perfect experience.
• 【Adjustable fixture】Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4 ", which is large enough to fit in all size hole saws. Movable ball bearings, two modes (fixing 3 or 4 bearings) are your choice, just flip the board.
• 【Various sizes】This diamond hole saw kit come with 10 different drill bits to meet various needs. Including the following diameters: 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver.
• 【Ideal select】This diamond-coated hole saw bit can be used to remove rings on glass, marble, tile, ceramic, PVC or other materials. When the diamond bit is working, please continue to add water to reduce the drilling speed, reduce the drilling pressure, and increase the water lubricity, which will greatly extend the life of the bit.

User questions & answers

Question:	Can I use them to punch a hole in granite counter
Answer:	I wouldn’t! And it wouldn’t even stick to the tiles I needed them for. Their cheap bits. I wouldn’t recommend for granite.
Question:	Do I need to add water during use
Answer:	Hello, I am the seller. Thank you for your question. Water needs to be added during use. Good cooling will greatly extend the service life of the drill.
Question:	I need to drill holes in the bottom of the glazed ceramic or ceramic pot. Will these bits work
Answer:	They do a great job, the key is to put a water bottle nearby and keep the things you want to get wet. You will be surprised at how well they perform.
Question:	Can it be used for thin wood boards
Answer:	I don’t know. These drill bits are specially designed for glass, maybe ceramic instead of wood.

Product features

Adjustable fixture

Precise positioning without offsetting. Movable ball bearings, two modes (fixed 3 or 4 bearings) are your choice, just flip the board.

Design concept

Side groove design helps the entry of cooling water and the drill bit can remove waste, thereby keeping the drill bit clean during work.

Special material

The diamond bit is made of carbon steel and has a nickel-plated coating, and the one-piece structure is sufficiently rigid.

Package includes

10PC diamond drill + 1PC adjustable hole saw guide fixture + 1PC screwdriver + 1 instruction manual.