12 best saw for drill

• ✔ Satisfied Size - 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 14mm/0.55", 16mm/0.62", 18mm/0.7", 22mm/0.86", 26mm/1.02", 32mm/1.26"
• ✔ Ideal Application - This diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or other.They are perfect for drill glass, tile bottles,blocks jars, fiberglass porcelain tile ceramic, slate Mable, granite light stone
• ✔ Super Material - These diamond drill bits made of high-speed steel that is durable and have a long sevice life,which are high quality and good performance that excellent for making clean and accurate hole.
• ✔ Sharp&Smooth Cut - Coated with high quality diamond, the diamond hole saw creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably
• ✔ Note - When you using the diamond drill bits, please use lubrication (water),otherwise the diamond core drill will burn.Not for use on Concrete or for depths beyond about 1/2".

User questions & answers

Question:	Drill though iron sink
Answer:	Hi，out wet tile saw included one piece of Diamond blade .The Arbor Size is 5/8'',outer size is 7''.
Question:	Can these be used on sterling silver sheet
Answer:	Hi，our tile cutter is used for cutting marble and tiles.
Question:	Can you use this to cut a hole in a glass wine bottle
Answer:	There is a bottle of clear included with the kit which is supposed to be used to seal the color. Mix the colors to get as close a color match as possible and then seal it.
Question:	Does this set come with a case
Answer:	I do not think it would work

Product features

Super Material

These diamond drill bits made of high-speed steel that is durable and have a long sevice life,which are high quality and good performance that excellent for making clean and accurate hole.

Specifications

Size: 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47",

14mm/0.55", 16mm/0.62", 18mm/0.7", 22mm/0.86",

26mm/1.02", 32mm/1.26"

 

Note

When you using the diamond drill bits, please use lubrication (water),otherwise the diamond core drill will burn.Not for use on Concrete or for depths beyond about 1/2".

What Materials Can I Use Diamond Drill Bits On?

Diamond drill bits are perfect for drilling holes through hard materials such as these:

• Glass, sea glass, beach glass, fused glass
• Stone, gemstones, rock, pebbles
• Ceramic, porcelain, tiles, glazed pottery, plates
• Shell, antler, bone, fossil
• Very hard wood

Diamond Drill Bits - Why should I Choose?

• Small Diamond Drill Bits have a solid end and therefore a larger surface area so they last longer than the small diamond core drills, but may take longer to drill a hole. They are more robust and therefore ideal for very tough, dense pieces of sea glass, very hard stone, precious stone, gemstones, hard shell, bone and antler.

 

• If you're a regular user of diamond drill bits it is worth having a combination of both small diamond drill bits in your tool box as sometimes you don't know if you have a very tough material until you start drilling!

Operation Note

• As with all diamond drill bits you should use water as a lubricant and coolant.
• Being hollow, allows the water to flow up inside and around the inner core of these drill bits as you are drilling, helping to keep the drill bit cool and removing the debris.
• Start your hole diagonally, make a round trace and then hold drill straight.

• ★ Widely Used: Set of 6 mini circular saw discs blades for DREMEL, FORDOM Drills Rotary Tools, electric power tools, for accurate, fast and precision cutting, which is a good DIY tool.
• ★ High-Level Material: Made of strong HSS high speed steel, following the unique advanced science cutting principle, so the defects of other blades can be effectively resolved.
• ★ Size：22（25.32.35.44.50）* 0.8 *6.35 diameter; mandrel shank 1/8".
• ★ Multipurpose: Fit for timber, plastic, fiberglass, aluminum & thin sheet metal etc. soft metal. An indispensable tool for carving work.
• ★ Note: Do not cut hard object, It is the best for cutting wood and PVC. The blades will vibrate when working so it must be handled carefully to prevent the blades from jumping out to hurt people.

User questions & answers

Question:	Does this cutting wheel work with the dremel
Answer:	Yes
Question:	Does it works with norma electric drill
Answer:	This model (the 2625) is perfect for my use, but you may want to do an internet search for model #2719, which is the same design as this only with the Powerstate brushless motor (FUEL), going for about $149 for the tool only. The 2719 model is not available on Amazon for some reason. The stroke is 7/8 inch, vs. 3/4 inch for this model, so probably cuts faster too. Both take any size of the M18 lithium batteries, but If you are concerned about using bigger batteries, the FUEL model #2719 may be more what you are looking for.
Question:	How thick are the blades? Top pictures nicely show different thicknesses 0.7mm, 0.4mm etc which is what I'm looking for, but description contradicts
Answer:	Yes, depending on what blade length you choose. Has plenty of power. Only draw back is that like any reciprocating saw, if the blade hangs up the tool bounces. Slower cut can solve this. Great tool and handy.
Question:	Does it work with regular 18 volts power drill
Answer:	I own both. They have nearly the same footprint size and no real weight difference. The 12v has a slightly bigger grip because the battery fits inside the handle. For light-duty or occasional cutting, the 12v is great. The new 12v - 4.0Ah batteries gives more power and longer run time. But it's definitely slower and less powerful than the 18v. The 18v will easily match or outperform any reciprocating saw (sawzall) because it's one-handed, more maneuverable, and can get into really tight spaces. Anybody that disagrees hasn't been standing on a ladder trying to install 2-inch pipe in a ceiling around sprinkler pipes and ductwork. Plus hot-swapping batteries between hackzall and hammer drill is pretty convenient. On 2-inch conduit pipe, I got 2 cuts using the 12v and a fully charged standard battery. Using the 18v, I got at least 12 cuts and I didn't swap battery during 10-hrs.

Product features

Rotary Tool Cutting Wheel:

1. Save Money ane Time: The cutting wheels set cuts down on the cost of operating on dremel rotary tool and is ideal for cutting, grooving and trimming wood, plastic, aluminium and DIY production. These cutting wheels are compatible with dremel rotary tools as good as original. We use original dremel rotary tools to test this accessory kit.
2. Easy to Install: These cutting wheel set for dremel rotary tool are easy to install and replace. These rotary tool accessories compatible dremel are suitable for DIY projects and the home hobbyist and also great gifts for those who are working on wood, aluminium, plastic ,DIY craft.
3. Multi-purpose Tool: The drill cutting wheel and mandrel set is ideal for fine precision cuts in aluminium, brass, copper, wood, plastic and more
4. Compatibility: 1/8" (3.175mm) shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools

wood cutting

Plastic Cutting

Aluminum Cutting

Size：

• Diameter/Thickness/Hole diameter
• 1x 22mm/1mm/6.35mm
• 1x 25mm/1mm/6.35mm
• 1x 32mm/1mm/6.35mm
• 1x 35mm/1mm/6.35mm
• 1x 44mm/1mm/6.35mm 1x 3.175mm (1/8'') mandrel

Note:

This is not an Dremel orig product and is not covered under any Dremel service. The Dremel brand name and logo are the registered brand of the respective owner. Any use of the Dremel brand name, model or part designation for this product is made solely for purposes of demonstrating compatibility.

• RESIN CUT OFF DISCS – With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc. They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting.
• HSS CIRCULAR SAW BLADES – The cut off saw blades are high speed steel and there are 5 kinds of outer diameters 22/25/32/35/44/50mm. They are suitable for cutting wood, plastic products, aluminum alloy, soft metal, etc.
• DIAMOND CUTTING WHEELS – The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable quality, etc., they are suitable for cutting gem, jade and glass.
• GREAT TOOL FOR DIY – Compatible with most power rotary tools. The cutting wheel set for rotary tool is suitable for cutting wood, plastic, gem, glass, aluminum alloy and jade. They are a great tool as well as perfect gift for DIY hobbyists.
• 100% SATISFACTION – If you have any problems, simply contact us and we promise an 100% satisfactory solution. You don't need to worry about returns and refunds.

User questions & answers

Question:	buenas ante de realizar la compra quiero saber si le queda a una maquina dreme de 100w
Answer:	Possible, but the best choice is more likely reciprocating saw, rather than circular.
Question:	Will these work on metal bolts
Answer:	Sure why not
Question:	Will this work with Dremel
Answer:	I have the dremel 3000, works great.
Question:	What dremel can use to attach the blades
Answer:	Hi, the Cutting edge diameter from 0.8mm to 3.175mm;1.5-3.175mm Set, 1/8” shank size. Commonly used in CNC router.

Product features

Product description

Specifications:

Material:HSS / Diamond / Resin

Dimension:

Resin cut off discs：

Outer diameter 32mm

Inner diameter 3mm

Thickness 1mm

HSS circular saw blades:

Outer diameter 22/25/32/35/44/50mm

Inner diameter 6.35mm

Diamond cutting wheels:

Outer diameter 22mm

Inner diameter 3mm

Weight: 145g

• ★ Widely Used: Set of 6 mini circular saw discs blades for DREMEL, FORDOM Drills Rotary Tools, electric power tools, for accurate, fast and precision cutting, which is a good DIY tool.
• ★ High-Level Material: Made of strong HSS high speed steel, following the unique advanced science cutting principle, so the defects of other blades can be effectively resolved.
• ★ Size：22（25.32.35.44.50）* 0.8 *6.35 diameter; mandrel shank 1/8".
• ★ Multipurpose: Fit for timber, plastic, fiberglass, aluminum & thin sheet metal etc. soft metal. An indispensable tool for carving work.
• ★ Note: Do not cut hard object, It is the best for cutting wood and PVC. The blades will vibrate when working so it must be handled carefully to prevent the blades from jumping out to hurt people.

User questions & answers

Question:	Are these compatible with the Drexel
Answer:	Any of the 20 volt batteries will work. I bought 2 5 amp batteries for it. But it will work with the 1.5 ones as well. Great sawzall. Any of the dewalt 20v chargers will work.
Question:	Is it compactable with dremel 8200-2/45 cordless multitool li-ion (7.2 v
Answer:	You can use either DCB200 (3.0 Ah) or DCB204 (4.0 Ah) Batteries with this saw. The batteries are between $99 to $119 for a 2-pack currently. If you do not already have the saw, a kit with battery/charger included with purchase may be your best option. Take a look at Models DCS380M1 or DCS380P1 for full kits.
Question:	Hi , What are the blade thickness's
Answer:	All those blades are compatible :) Thanks for asking.
Question:	Saw a review where the blade flew off while using. Said they didn't tighten up well. Has anyone else had this problem
Answer:	I get this saw onto places that I never thought I would ever get a recip saw. The places this saw goes and works I don't even notice any difference. I would trade off even more spm's if needed to get a saw like this. I've used others like this and they all have jammed up on me. I do work my tools extremely and I mean extremely hard and will probably burn this one out eventually but anything that can stay together under my use is a worthy tool.

Product features

Disc Drill Blades

• 【CUTTING DIAMETER】9 specifications:16-53mm,16mm(5/8"), 22mm(7/8"), 25mm(1"), 28mm(1-1/10") ,35mm(1-3/8"), 38mm(1-1/2"), 45mm(1.77"), 50mm(1-15/16"), 53mm(2-1/16").9 hex wrenches and 2 spare center drills in the package.
• 【MATERIAL】The cutting edge of the Tungsten Carbide Tipped Cutters(TCT hole saws) adopts K10 carbide,which can cut 5mm stainless steel plate, 20mm cast iron, 3mm aluminum alloy, and 4mm hot rolled section steel.（The depth is for reference, pay attention to the speed during use）
• 【FEATURES】TCT drill bit sets cut quick, precise holes in thick cast iron, stainless steel, aluminum alloy, non-standard metal, can also be used for wooden plates.
• 【TIPS】When processing stainless steel, please keep the drilling rig running evenly at a low speed, or punch the center hole in advance, which can better extend the service life of the product.
• 【APPLICATION】The hole saw kit is suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.

Product features

9 PCS 16-53mm Tungsten Carbide Tipped Hole Saw Drill Bit

Tungsten Carbide Tipped Hole Saw Drill Bit

• 16-53mm，16mm(5/8"), 22mm(7/8"), 25mm(1"), 28mm(1-1/10") ,35mm(1-3/8"), 38mm(1-1/2"), 45mm(1.77"), 50mm(1-15/16"), 53mm(2-1/16").
• Tungsten Carbide-tipped cutting edges last longer and can be run at higher speeds to create holes of exceptional quality and accuracy.
• The cutting edges of the TCT hole saws adopt K10 carbide,which can cut 5mm stainless steel plate, 20mm cast iron, 3mm aluminum alloy, and 4mm hot rolled section steel.

• 🔺HIGH-QUALITY - Made of premium heat-treated carbon steel, rust-proof and wear-resistant, very easy to put together the set with the drill, ultra sharp serrations for high-performance, faster and cleaner cutting. has the advantages of high performance, oil resistance, rust resistance, durability and long life.
• 🔺19PC ACCESSORIES - ▲13 hole saws with the size of 3/4" (19mm), 7/8" (22mm), 1-1/8" (28mm), 1-1/4" (32mm), 1-1/2" (38mm), 1-3/4" (44mm), 2" (51mm), 2-1/2" (64mm), 3" (76mm), 3-1/2" (89mm), 4" (102mm), 5" (127mm), 6"(152mm), ▲2 mandrels, ▲2 drill bits, ▲1 hex key, ▲1 installation plate.
• 🔺WIDE USE - Suitable for soft wood, plywood, thin PVC board, plastic, plasterboard but not for metal, hard wood and density board, great for tasks of cutting multiple hole sizes from small to large in desk surfaces, doors and furniture. The maximum size is 6" (152mm), the minimum is 3/4" (19mm), with 25mm cutting depth, meet various demand.
• 🔺EASY TO CARRY & STORE - SEDY hole saw kit comes with a nice hard red storage case to keep all saw blades and accessories organized and convenient to take. Designated slots in the case keep every piece in place, Improve work efficiency. You can put every used accessory back in place to prevent loss.
• 🔺BETTER THAN BEST - Whether you buy it for your own use or as a gift, this set of products will solve at least one of your worries, because we never carelessly make tools. Choose it and you can always trust it. If you have any question or advice, please write to us through Amazon. We will solve your problems in time.

User questions & answers

Question:	Would this cut through fiberglass looking to cut whole for speakers in my boat
Answer:	I used them to cut a 3.5” diameter piece of plexiglass which was 1/8” thick. It worked very well. If you went slowly I think it would do fine.

Product features

13 Sizes Blades:

3/4" (19mm), 7/8" (22mm), 1-1/8" (28mm), 1-1/4" (32mm), 1-1/2" (38mm), 1-3/4" (44mm), 2" (51mm), 2-1/2" (64mm), 3" (76mm), 3-1/2" (89mm), 4" (102mm), 5" (127mm), 6"(152mm)

Package Content:

13* Saw Blades

2* Mandrels

2* Drill Bits

1* Installation Plate

1* Hex Key

1* Package Case

Easy to set up:

All the tools are what you need to change the saw blade easily and quickly. A hex key, an installation plate, two mandrels, two drill bits are included for tool installation.

• PREMIUM QUALITY, LONG LASTING Diamond Hole Saw Drill Bit Tool Set in Elegant PU Zipper Storage Case.
• Diamond Hole Saw Guide INCLUDED - High Density Poly Insert. Diamond Drill Bit Tools 10 Piece Set 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2 inches
• BUY AS A SET and SAVE OVER 80 Percent on MOST POPULAR 10 Sizes. Having these sizes available will help you cover almost all of your applications.
• Our hole saws are taller than most competitors. You can drill through thicker materials with our tools. Shank size is 3/8 inch for common drills (corded electric, cordless rechargeable, upright, other rotary tools)
• EXCELLENT RESULTS with Included GUIDE in Granite, Ceramic & Porcelain Tiles, Glass, Marble, Slate, and many types of Stones. No need for pilot drill, use the insert us guide.

Product features

High Quality Drilax Diamond Drill Bit - Hole Saw Set - 10 Pieces

10 Diamond Hole Saws

Included Case and Poly Foam Insert - Can be used as a drill guide

Mini Water Pool Around the Hole Area

You can build a mini water dam around the hole with plumbers putty.

Starting Slanted Angle to Get the Hole Started

You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.

Simple Idea to Keep Diamond Hole Saw on Target

Simple Idea to Keep Diamond Hole Saw on Target

Taped Pieces of Scrap Wood

Wood Template Guide - Clamped

You can make your own guide out of plywood - plastic or even cardboard. All you need is to keep the drill bit in place until it makes the initial marks.

High-Quality Diamond Coating

Drilax High-Quality Diamond Hole Saw - Longer Tool Life

Drilling Holes in Glass Fish Tanks

Drilax Diamond Hole Saws for Drilling Holes in Glass Fish Tanks - Using Water Pool - Keeping Tool Wet and Cool

Marble, Granite, Quartz - Drilling Holes

Drilax Diamond Hole Saw Drill Bits for Drilling Holes in Marble, Granite, Quartz

Drilling Thick Outdoor Tiles

Drilax Diamond Drill Bits for Drilling Wall or Floor Tiles, installing Shower Doors, Faucets, Drain Holes.

Using Wood Template

You can use a wood template to locate the diamond hole saw.

Bathroom Renovations

Drilling holes for faucets or pipes for bathroom renovations.

Drilling Floor Tiles

Drilling Floor Tiles - Bathroom Renovation

Complete Bathroom - Shower Renovation

Complete Bathroom - Shower Renovation with DRILAX Diamond Tools

Product description

Note:

1.For your safety, wear gloves and goggles when using.

2.The screws must be fixed to the top before use to ensure that the screws are tightened. Prevent the saw blade from flying out during high-speed rotation.

3. When installed, the entire Mandrel Shank should be inserted to the end, as the electric grinding speed is pretty high, if you don’t, the shaft will get bent soon or the cutting angle will be off from center.

4. Do not cut the hard things, The cutting wheel is only cut along its edge, and the wheel is perpendicular to the material being cut when in use.

5.(1/8" / 3.2 mm) mandrel as much as possible for small size saw blades.

6. In the selection of saw blade, the smaller your electric mill, choosing a smaller saw blade will be much stabler.

7.Cutting plastics requires very slow speeds; wood requires low speed cutting. If jitter occurs, increase the speed.

8.The cutting wheel will break under large pressure. The test can first be carried out on the waste.



The mini rotary tool is suitable for DIY projects and the home hobbyist.



For cutting, grooving and trimming



Package Include:



10 × Diamond Cutting Discs with 2PCS (1/8'' /3mm) Mandrels

6 × HSS Circular Saw Blades with 1PCS (1/8'' /3.2mm) Mandrel

1 × For Circular Saw Blades (1/4'' /6mm) Mandrels

20 × Resin Cutting Wheels

2 × For Resin Cutting Wheels (1/8'' /3mm) Mandrel

• Mini Rotary Tool Kit: 20 resin cutting wheels, 10 diamond cutting wheels with 2pcs (1/8'' /3mm) Mandrel, 6 HSS Cutting Saw Blade Discs with 1pcs (1/8'' /3.2mm) Mandrel, 1pcs For Circular Saw Blades (1/4'' /6mm) Mandrels, 2pcs For Resin Cutting Wheels (1/8'' /3mm) Mandrel.
• Diamond circular saw blade size： 22mm (7/8'')，suitable for cutting gems, glass and ceramics.
• The wood cutting saw blade discs are made of high speed steel and are 22mm (7/8''), 25mm (1''), 32 mm (1-1/4 ''), 35mm (1-1/2 '' ), 44mm (1-3/4''), 50mm (2''), suitable for cutting wood, plastic, copper, laminate and aluminum.
• Resin cutting wheel ： 32mm (1.27''), suitable for cutting metal. Do not use too much force when installing the resin cutting piece.
• Suitable for most power rotary tools. The rotary cutting wheel set is suitable for cutting wood, plastic, gemstone, glass, ceramic, stone, aluminum and copper. The mini rotary tool is suitable for DIY projects and the home hobbyist.

User questions & answers

Question:	Will this work on micro dremel
Answer:	I have the Dremel 200 but I use it mostly for crafting and making jewelry. In my opinion the standard accessories cutters, grinders and so forth looks like they would fit the micro Dremel models. Everything in the Hamineler set fits my 200 model perfectly and works great. However, if you're still unsure you can call Dremel and double check.
Question:	Saw a review where the blade flew off while using. Said they didn't tighten up well. Has anyone else had this problem
Answer:	Mine have been tightened just fine no issues, plus I have another model using the same tools with no issue either. DP
Question:	Will this work on Marble wall tile/natural stone
Answer:	I think it would. These a small disks.
Question:	will hamineler cutting wheels fit the populo dremel
Answer:	Be careful when using the shanks for a long time, especially when you trying to cut metals, when mandrels heats too much it will bend, it's pretty scary

• [THE MOST COMPLETE HOLE SAW KIT] Our hole saw set includes 12 most common sizes of saw blades:3/4" (19mm), 7/8" (22mm), 1-1/8" (28mm), 1-1/4" (32mm), 1-1/2" (38mm), 1-3/4" (44mm), 2-1/8" (54mm), 2-1/2" (64mm), 3" (76mm), 3-1/2" (89mm), 4" (102mm), 5" (127mm), 2 mandrels with nut, 1 Hex Key, 1 Install Plate. These tools are there to satisfy all your needs.
• [DURABLE AND SAFETY] Carbon Steel, Heat Treated. High strength and hardness, design for increased durability and outstanding cutting performance. Our hole saw features a reinforced shoulder for added strength and longer life.
• [EFFICIENT AND ACCURATE] High precision, smooth cutting edge. Super sharp saw teeth have been designed to cut faster, no material get stuck makes work faster and better finished. 
• [EASY TO SET UP]  All the tools you need for quick and easy saw changing. A hex key and install plate are included for tool installation. Mandrels with 20mm nuts that can be adjusted by hand or using a spanner when greater tightness is required.
• [PERFECT FOR MULTI-PURPOSE] Suitable for soft wood, plywood, oak, thin PVC board, plastic,drywall but not metal, great for tasks including cutting holes in desk surfaces, doors, furniture and cabinets. Serve for fitting handles and locks for furniture.

User questions & answers

Question:	Is there a warranty on this product
Answer:	YES.There are 12 months of worry-free protection, return refunds. If there is any dissatisfaction, please contact the seller, we will try our best to solve your problem.
Question:	The Dia of the saws are all over the place, but where can I find the thickness. Anyone know
Answer:	Goes to 2 to 3 in thick
Question:	How can I extend to drill thru a wall
Answer:	I used mine to drill through a 6" wall with 1' plywood. It can be done. A nail contact will destroy them.
Question:	Is everything that is needed included besides the drill or is there anything i have to buy extra
Answer:	All you need is a drill.... and something that needs a hole.

• ✨【Material】The hole saw is made of HHS BI-metal.Non-binding clean edge design.
• ✨【Dimension】Total Length : 96mm / 3.77" ;Shank Diameter : 10mm / 0.4";Cutting Dia: 75mm/2.95" ;Cutting Depth : 25mm / 1"
• ✨【Application】 This Hole Saw Drill Bit is designed for wood / plastic cutting.Suits for corn hole board drilling and other home projects.
• ✨【Sharp Teeth】The teeth is sharp and vibarition is less, which enable more stable operation and make the hole can be cut with quick speed and balance.
• ✨【Clearance Hole】The hole saw drill bit is equipped with chip removal holes, which largely improve the speed to clean chips.

User questions & answers

Question:	How close to 3" is the 75mm saw
Answer:	On a ruler, 75MM = 3 inches . On Rannb,s information 75MM =2.95 inches.
Question:	Is this used with a normal household drill
Answer:	Hi. Thanks for your interests to our product. Yes, this hole saw can be used with normal household drill. The shank diameter of the hole saw is 10mm/0.393".
Question:	Can the depth of the drill bit be adjusted? there is very little room behind the hole I need to make and don't want to hit what's behind
Answer:	Once the hole is half way through you can remove the center drill bit entirely.

Product description

The Go Sports 6" hole saw is a premium construction grade tool that cuts perfect 6" diameter holes, no matter what your project. We were frustrated by the other cheap hole saw products that broke after only one use, so we designed our own that is built to last. The bits are perfect for a wide variety of projects, including corn hole boards, air ducts, ceiling lights, speakers and more. The bit universally attaches to any 3/8" drill & up and has a blade depth of 7/8" inch. The saw can cut through wood, drywall, plaster and soft metals. Adult use only and always wear appropriate safety gear when using.

• CONSTRUCTION GRADE: Heat treated carbon steel alloy 6 inch hole saw blade, non binding clean edge design
• PROFESSIONAL CUTTING: Hole saw cuts smooth and even 6 inch diameter holes through wood, drywall, plaster and thin metal; 7/8 inch saw blade depth
• PROJECT TOOL: Built tough for repeat use and handy for working on corn hole boards, air ducts, ceiling lights, speakers and more
• DIY READY: Includes everything you need to do it yourself, mandrel and drill bit work with any 3/8 inch drills & up

User questions & answers

Question:	Will this work on 3/4 in drywall for recessed lights
Answer:	Hello - Yes, our hole saw is designed to cut through wood, drywall, plaster and thin metal. Feel free to reach out to our customer service team with any questions.
Question:	What is the outside diameter of the hole saw
Answer:	Hi there, The diameter is 6". Thank you, -The GoSports Team
Question:	are there replacement arbors? the drill bit on mine snapped in half
Answer:	This is just a common 1/4 inch bit held in place by a set screw. You can use an allen wrench to remove the broken one and insert any 1/4 inch bit.
Question:	How would it do on Food Grade plastic 55 gal. drum
Answer:	Ate threw wood with ease, should work fine on plastic drums.

Product features

Build Your Own Cornhole Boards

Get the perfect woodworking tool for your DIY cornhole project. The GoSports Hole Saw makes regulation size 6 inch diameter holes for your homemade cornhole set.

Tackle Home Projects

In addition to cornhole projects, the GoSports Hole Saw comes in handy for home projects when working on air ducts, ceiling lights, speakers, and more!

Heavy Duty Steel Design

Cut clean 6 inch diameter holes through wood, drywall, plaster, and thin metal. Mandrel and drill bit work with any 3/8" and larger.

Product description

It is a premium construction grade tool that cuts perfect 6” diameter holes.

Built tough for repeat use.

The bit universally attaches to any 1/2" drill and has a blade depth of 7/8" inch.

 

Package Included:

1 * 6” hole saw

1 * mandrel and drill bit

• This Hole Saw Drill Bit is designed for wood / plastic cutting. Great for Making Cornhole Boards. Package included: 6” hole saw, mandrel and drill bit work with any 1/2" drills.
• It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic.
• 6” hole diameter - prefect size for Corn hole board Drilling and no matter what you project like cutting 6” diameter holes through wood and plaster; 7/8" saw blade depth. Pins lock the saw well and prevent Too tight or falling off.
• With the non-binding clean edge design, this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole.

User questions & answers

Question:	Where is it made
Answer:	By looking at the writing on the box I would guess China.
Question:	What is the diameter of the drill bit
Answer:	The drill bit is 15/64" (nearly 1/4"), the drive is 3/8". Be careful with this hole saw--you need to hold the drill with both hands. Also, I have two good cordless drills, but neither of them had the torque needed to cut with this saw. Use a corded drill, and hold it with both hands; it has a kick like a mule if you get the saw in any kind of a bind while sawing. On the plus side, it's very sharp and very heavy-duty, does a good job on repeated holes (I was cutting 1/2" plywood).
Question:	Is actual hole size 6" or is it slightly larger considering blade width
Answer:	Worked great for our cornhole game. Was 6 inches true!
Question:	Will this cut through sidings
Answer:	Assuming it’s vinyl or wood.... yes. Used mine for corn hole and it worked great. Just be very very careful as it is quite sharp. Be sure to use thick gloves so you don’t cut yo-self.