11 best drill bit for wood brad point

Product description

DeWalt brad point bits have precise cutting edges to reduce splintering and a brad point tip that reduces walking. They have engineered flutes for clean and effective chip removal. These bits are ideal for drilling precise holes in wood, and great for use in doweling. Set includes: 1/8, 3/16, 1/4, 5/16, 3/8, and 1/2-Inch bits

• Precise cutting edges to reduce splintering
• Brad point tip reduces walking
• Engineered flutes for clean effective chip removal

User questions & answers

Question:	What is the depth of cut for the 1/8” drill bit
Answer:	saw tooth
Question:	does the 1/2" bit specifically fit a 3/8" chuck? It looks to have a narrower shaft bottom but I'd like to be sure
Answer:	You probably could, but you would not get holes you would be proud to say I drilled them. you probably would be happy with the small bit up to about 3/8".
Question:	Why are you very expensive for shipping to Egypt
Answer:	All I know is that I bought it from the USA, but as to the manufacturer? No markings on case or bits, only Porter Cable.
Question:	In what country were these made
Answer:	All of the bits have a ⅜" diameter by 1⅛" long shank. The main part of the shank is determined by the size of the bit.

Product features

Brad Point Bit Set

DeWalt brad point bits have precise cutting edges to reduce splintering and a brad point tip that reduces walking. They have engineered flutes for clean and effective chip removal. These bits are ideal for drilling precise holes in wood, and great for use in doweling.

With precise cutting edges helps to reduce splintering and a brad point tip to decrease walking, the DEWALT features commonly used bits to power through wood with ease. A high-speed steel construction delivers extreme durability.

Product description

Steelex 25 pc. Deluxe Brad Point Set D1034

From the Manufacturer

Every woodworker needs this set. Twenty-five bits in sizes from 1/8-Inch to 1/2-Inch by 1/64-Inch increments. Comes in a steel index

• 1/8" to 1/2" by 1/64" increments, 1/4-Inch shank
• Bits larger than 23/64" have 3/8" shank
• Excellent for clean, flat bottom holes
• Steel Index Included
• High Speed Steel (HSS)

User questions & answers

Question:	what are the sizes of the bit
Answer:	It brings several burs and disks. I'm not sure if there is a actual metal cutting disk in the kit because the package is seal.
Question:	does this fit a 3/8 drill
Answer:	Yes and our you're able to get it to fit (since dremel is bigger) then it works. You also have to modify one of the collets a little to accept the square line running inside the flex shaft. I've been using mine with this for about a year. Expect a bit of drag since this isn't a powerful rotary tool. Best if used with variable speed tool. Use at your own risk though
Question:	are these suitable for plywood, the brad points I have used load-up at the tip and won't drill through
Answer:	Of course, sanding leather would be damaging! However, gently buffing leather with a soft attachment might give it luster. What effect did you want?
Question:	Does it have 25/64 bits included
Answer:	No... This is not a heavy duty item. It is OK for working on model airplanes and ships and such but for working on tile floors you need something a lot bigger. Also, this thing vibrates like all hell. I cannot use it for more than a minute or so at a time without your fingers going numb.

Product description

Fisch chrome vanadium Imperial 29 piece brad point drill bit set is great for normal drilling operations in soft and hard wood using cordless drills or drill press machines. Optimal drilling speeds vary from 2,000 to 3,000 RPM. This 29 piece set is the perfect place to start when you need a quality drill set that will get the job done and give you years of service. This handy set includes common Imperial (Inch/fractions) sizes from 1/16” to ½” in 1/64” increments. The drill bits have full diameter shanks on bits that are 3/8” diameter and smaller. The set is housed in a quality plastic stand case that protects your drills and puts them at arm’s reach when it is time to get to work.

• Chrome-vanadium steel lasts longer between sharpening
• Less tear-out in hardwood, softwood and laminated materials
• Optimized outer spurs insure fast and easy cutting of the wood, scoring the outer rim of the hole before the main part of the drill begins to do its work
• For use in soft, hard, exotic, veneered and laminated wood, as well as MDF and even acrylic Plexiglas
• Beveled cutting edge leads to clean drilling without any deviation while feeding the bit into the material

User questions & answers

Question:	what are the sizes of the bits
Answer:	Hello! Anywhere between 2.5 to 7 hours on batteries. The LED lights use less energy than standard bulbs, which helps in the longevityof the battery life.
Question:	Specs say these are metric stainless steel. Description says imperial chrome vanadium. So which are they? Why this discrepancy
Answer:	Thank you for your question. The image is just showing the available colors but it only includes one lamp.
Question:	Where are these bits manufactured
Answer:	Hello LEM5, thank you for your question. This lantern is 7.8 x 4.15 x 4.1
Question:	Can someone state exactly where these bits are made
Answer:	Hello Richard Gidmore, thank you for your question. The lumens are listed High 200, Med - 100, Low - 20

Product description

Fisch chrome vanadium metric 25 piece brad point drill bit set is great for normal drilling operations in soft and hard wood using cordless drills or drill press machines. Optimal drilling speeds vary from 2, 000 to 3, 000 RPM. This 25 piece set is the perfect place to start when you need a quality drill set that will get the job done and give you years of service. This handy set includes common metric sizes from 1mm to 13mm in 0. 5mm increments. The set is housed in a quality plastic stand case that protects your drills and puts them at arm’s reach when it is time to get to work.

• Chrome-vanadium steel lasts longer between sharpening
• Less tear-out in hardwood, softwood and laminated materials
• Optimized outer spurs insure fast and easy cutting of the wood, scoring the outer rim of the hole before the main part of the drill begins to do its work
• For use in soft, hard, exotic, veneered and laminated wood, as well as MDF and even acrylic Plexiglas
• Beveled cutting edge leads to clean drilling without any deviation while feeding The bit into the material

User questions & answers

Question:	I did not see what sizes thry are. Does anyone know
Answer:	Yes, uses regular AS batteries.
Question:	What is the size of thw shank on the large size drill bits
Answer:	Not sure. It was a gift.
Question:	Whete is it made
Answer:	Yes, it is plastic. My grandson loves his
Question:	Will the 3mm and 4mm fit in a dremel
Answer:	We use a lamp indoors to charge it since we don't have a sunny window and that works just fine!
Question:	What is the length of the drills please-TIA
Answer:	No. It’s a nice lantern and the slide works really well offering more control of light than others I’ve had. But no magnet.
Question:	where made
Answer:	Description is wrong, 3 AA’s is what it takes. Honestly surprised at the question.
Question:	does it fit dremel 395 with 1/8 inch shank
Answer:	It is battery operated, not chargeable. So there is no charge time. Simply put new batteries in it if the old ones die.

Product features

FISCH FSF-328094 8pce Chrome Vanadium Metric Brad Point Drill Set

For normal drilling operations in soft and hard wood using cordless or drill press speeds from 2,000 to 3,000 RPM. This 8 piece set is the perfect place to start when you need a quality drill set that will get the job done and give you years of service. This handy set includes common metric sizes from 3 to 10mm in 1mm increments. The set is housed in a quality plastic stand case that protects your drills and puts them at arms reach when you need them.

Precision Engineered

The optimized spiral design enables better guidance of the drill from start to finish.

Improved Performance

Precision ground center point allows correct placement and starting of drilling operations.

Innovative Cutting Design

Outer spur lips optimize cutting to ensure fast and easy drilling of holes in all types of wood.

Every bit you need

Includes one each of the following sizes of 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, & 10mm.

Product description

Wood Owl, located in Miki, Japan, has specialized in the production of drill bits for the woodworking industry since 1923. While the factory is highly mechanized, many of the operations are still performed by hand by skilled workers. This is a 6 pieces set with 1/2”, 5/8”, 3/4”, 7/8”, 1” and 1 1/4” fast boring bits. These bits are designed to be used in cordless drills and will extend battery life by as much as 35%. They can also be used in a drill press with excellent results. These bits are precision ground and sharpened for even and easy cutting of accurately sized holes. These bits have unique chamfered cutting edges to start on target, drill fast and clean holes with minimal blowout. They are made from high carbon steel that are fully induction hardened for long life. Bits are 6 1/2" long and have 1/4" quick release hex shanks.

• 6 Pieces set with 1/2”, 5/8”, 3/4”, 7/8”, 1” and 1 1/4”” bits, all 6 1/2” long
• Ultra-efficient drilling. Can extend battery life on cordless drills by as much as 35%.
• Brad point and unique chamfered lead-in edge for smooth starts, fast cuts and smooth holes
• Produces minimal blowout on exit holes
• Induction hardened steel construction and precision ground cutting edges for durability and accuracy.

Product description

Committed to Quality, Consistency, Service and Value QUALITY at Viking Drill and Tool begins with the finest tool steel we can buy and ends with the world class products in our catalog. Our cutting tools are designed, engineered and superbly crafted to provide long lasting durability. Our 74,000 square foot St. Paul, Minnesota manufacturing facility is specifically designed for the unique task of efficient high quality cutting tool manufacturing. CONSISTENCY is a natural by-product of our experience and dedication to quality. At Viking Drill and Tool, skilled machine operators working with the world's finest raw materials have the capability of providing you with consistent high quality products time after time, year after year. On our Ultra Bor Super Premium products, we routinely cut recognized tool tolerance standards by one half to insure that our customers receive drills manufactured to the tightest possible specification and utmost in consistency and accuracy. All materials used at Viking Drill and Tool meet the rigorous qualifications of National Aerospace Standard (NAS) 907. This standard, recognized as the most stringent in the industry precludes the use of lower quality steels which do not hold up under rigorous applications. The use of these extreme high quality materials insures that consistency is built in to every one of our U.S. manufactured products. Our extensive selection of U.S. manufactured tools is designed to give you the right tool at the right price for whatever tough job you come up against.

• 14 pc. Set Premium Jobber Burrout Brad Point
• Burrout Point cuts the circumference of the hole
• Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance
• Special Hi-Molybdenum tool steel
• Brad Point, 14 pc. Set

User questions & answers

Question:	Where are these drill bits made please
Answer:	St. Paul, Minnesota
Question:	The box shows spaces for 22 bits, but this set comes with 14. Is there a set that contains all 22 bits to complete the box
Answer:	It is a 14pc set. There are 14 bits just as photographed. The index has a max capacity of 21
Question:	Is there a protective padding inside the top of the case to prevent the tips from contacting during shipping
Answer:	No
Question:	Where are these manufactured? Thanks
Answer:	St. Paul, Minnesota.

Product description

Dremel accessories are truly among the finest products to maximize your woodworking experience. Built on a foundation of technology and innovation, Dremel accessories always deliver the most professional results.

• Compatible with all Dremel rotary tools.
• Titanium coated brad points stay on center and begin drilling immediately.
• High-speed drill bits ideal for drilling into wood.
• Now drill holes up to 1/4" diameter
• Includes bits for 1/8", 5/32", 3/16" and 1/4" (1/8" Shank on all bit sizes).

User questions & answers

Question:	Can I use these bits to make a hole in very thin tin containers or what dremel bit can I use? I would like 1/4 holes
Answer:	6.5 AñOS
Question:	How long are these bits ? I need to make a 1/4" hole 3/4" deep in a wood shelf using the dremel plung router or drill press
Answer:	These are not designed to be used for protection. This is a costume only.
Question:	can bit drill hardened steel
Answer:	No ring on the glove....
Question:	would these work with a heavy plastic (i.e. thicker guitar picks
Answer:	Manually

Product features

The Ultimate Solution

Build drawers, cabinets and other DIY projects around home with ease with the Dremel 631 Brad Point Bits as it can drill wood accurately. Compatible with all Dremel rotary tools, these point bits are titanium coated that stay on center and begin drilling immediately. Easy and simple to use, the Dremel 631 Brad Point Bits is your solution for home improvements.

Product description

Bosch offers a complete line of wood boring bits for heavy duty and fine woodworking applications. Brad Point bits from Bosch are made to deliver accurate, clean holes every time with faster boring action. Other wood boring bits offered include spade bits, self-feed bits, bell hanger bits, forstner bits, and hinge boring bits.

From the Manufacturer

Bosch's line of Brad Point bits are designed for drilling smooth clean holes in wood.

• Designed to drill smooth, clean holes in wood
• Tip provides easy positioning and accurate starts
• Extra-wide flutes deliver fast chip removal
• Designed for both portable drills and drill presses

Product features

Bosch Brad Point Wood Drilling Bits

Constructed from a heat treated chrome carbon steel alloy, Bosch Brad Point Bits are designed for durability and performance. Featuring a special spur tip, these bits provide easy positioning and fast starts while delivering clean, accurate holes in wood.

Professional Performance

Bosch fine woodworking accessories are ideal for for finish work, furniture building, and cabinetry

Fast, Accurate Starts

Center spur tip provides easy positioning and accurate starts.

Smooth, clean holes in wood

Cutting edges help to provide clean cuts without splintering.

Product description

Fisch Brad Point Drills are premium double flute wood twist drills are manufactured from high speed steel with center point, 2 cutters and 2 spurs. Designed for maximum performance, the optimized spurs insure fast and easy cutting of the wood fibers before the hole.

• Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled
• Beveled edge leads to a perfect drilling of the diameter without any deviation
• For use in soft, hard, exotic, veneered and laminated wood as well as MDF and even acrylic glass
• Made in Austria

User questions & answers

Question:	Will this bit fit inside a dremel
Answer:	Yes it will as long as that slim line pen kit requires a 7mm drill bit which most do.
Question:	Will this work on plastic
Answer:	I'm not sure which bit you are referring to. I ordered a bunch of single and set bits recently and 004158 isn't among them. However, if you send me the actual drill bit size that your curious abt, I'd be happy to help.
Question:	will the 7mm work for slim line pen blanks
Answer:	It works by penetrating deep into the wood. Coverage is dependent on just how porous the wood structure is. I had a 18’x18’ deck being resurfaced where the beams had split (too many nails and screws) and some of the ends were soft too. I used sister beams on the worst and followed up with the epoxy. I had some epoxy left at the end if that helps.
Question:	What is the overall lenghth
Answer:	I would use something else

Product features

Brad Point Drill Bit 5mm Dia x 86mm Oal

Chrome vanadium steel construction with ground center point to prevent drill bit from walking across material surface. Superior designed flute for improved chip extraction. Diameters and lengths available on request.

Soft Woods

These drill best are best used with a drill press for boring holes in soft woods.

Made in Austria

Fisch bits are made in Austria and these brad points are manufactured from chrome vanadium steel to ensure a long service life.

Product description

The Neiko Quick Change stubby drill bit set includes a plastic hex-shank holder and the following bit sizes: 3/32, 1/8, 3/16, 5/16 and 3/8-inch bits.

• [DURABLE]: The short bits are constructed of 4241 High Speed Steel for fast cutting against tough wood material.
• [PRECISE]: Brad Point Tip design delivers precise accuracy when drilling through surfaces.
• [VERSATILE]: 1/4-inch Hex Shanks are compatible with both standard and quick change Chuck Drivers, providing versatility in drilling needs.
• [CONVENIENT]: Each Stubby Bit measures at a length of 2. 3 inches for working in hard-to-reach tight spaces with Short and Right Angle Drills.
• [SIZES]: The 6pc drill bit set includes a Hex Shank Holder and the following bit sizes: 3/32”, 1/8”, 3/16”, 1/4”, 5/16” and 3/8” drill bits.

User questions & answers

Question:	Why are the sizes in the main pictures incorrect? The are reversed, is that how they arrive
Answer:	Very good Would buy it again Joe
Question:	I need to open a hole in hard-to-reach concrete to put in an anchor. Do you carry a stubby set for masonry (preferably impact) or will the set work
Answer:	Yes, mismarked. They are the standard 1/4 " hex.
Question:	Do you sell a complete 13 piece set of stubby drill bits from 1/16" to
Answer:	Yes. But at the rpm delivered by a screwdriver, it will take awhile to drill a hole.
Question:	How long are the bits
Answer:	Just the gloves.

Product features

Perfect for Home DIY Projects

Each drill bit is constructed with 4241 high speed steel for fast cutting against tough wood material. Drill bit stays sharp with each use without fail.

Quarter Inch Shank

Drill bits are equipped with a 1/4" hex shank making it easy to use on quick change drill chucks for fast and easy swapping or standard drills.

Ideal for Wood Materials

Stubby set is designed to be used on tough wood materials. Sharp edges drills out the perfect holes for all your project needs.

Short Length

Drill bits measures in at 2.3 inches, making it easy to reach awkward positions and works great with right angle drills.

Sharp Drilling Point

The brad drill bit point is great for penetration through wood surfaces and prevents slipping and walking.

Easy and Simple Organization

Set comes with bit holder that is labeled with each bit size for quick identification. Slim profile allows set to be stored in small toolboxes.

Product description

DeWALT DW1714 1/2" Brad Point Drill BitDEWALT is a leading manufacturer of industrial power tools with more than 300 power tool and equipment products as well as 800 power tool accessories. DEWALT tools can be found wherever tools are sold, nationally and internationally.DeWALT DW1714 1/2" Brad Point Drill Bit Features: 1/2" Brad Pt Bit Precise cutting edges to reduce splintering Brad Point tip reduces walking Engineered flutes for clean effective chip removal. Overall Length: 6 Flute Length: 4

From the Manufacturer

DeWALT DW1714 1/2" Brad Point Drill BitDEWALT is a leading manufacturer of industrial power tools with more than 300 power tool and equipment products as well as 800 power tool accessories. DEWALT tools can be found wherever tools are sold, nationally and internationally.DeWALT DW1714 1/2" Brad Point Drill Bit Features: 1/2" Brad Pt Bit Precise cutting edges to reduce splintering Brad Point tip reduces walking Engineered flutes for clean effective chip removal. Overall Length: 6 Flute Length: 4

• Precise cutting edges to reduce splintering
• Brad point tip reduces walking
• Engineered flutes for clean effective chip removal

User questions & answers

Question:	drill out 1/2 hole
Answer:	21 drill bits for cutting through hard metal, like stainless steel, aluminum alloy, and titanium alloy. These drill bits are made of high speed steel. They clearly are not titanium.
Question:	Will this work on a non DeWalt drill ? (Got a black and decker drill
Answer:	That’s what I ordered and received. Idk anything about the 1/8” shank pack