3 best pocket drilling jig

• Simple Operation. Thanks to its unique, magnetic quick- adjust base system, the design of the Massca Pocket Hole Jig provides rapid and simple operation to make it one of the fastest and easiest jigs available.
• Quality Design. No marking out is required when using this jig. It features an inbuilt workpiece thickness gauge, inbuilt drill depth setting gauge and inbuilt setup gauge for rapid checking of dimensions, fast operation and quick drilling of joints.
• Reliable Construction. The Massca features a hardened drill guide to supply a long life, along with a clamping magnet for use with steel clamps. As such, this Twin Pocket Hole Jig is designed to allow the accurate drilling of side- by - side pocket holes.
• Accurate Results.Use d for creating those perfect woodworking holes or to repair wood joints, the Pocket Joint involves cutting a slot and accurately pre- drilling a pilot hole at an angle between two boards before connecting the two with a screw.
• Complete Set. Perfect for joinery woodworking DIY carpentry projects, this set comes compete with a jig, drill bit, stop collar and hex key. The Pocket Hole Jig is designed for use with timber from ½"- 1½" in thickness (13mm- 38mm).

User questions & answers

Question:	Can someone compare and contrast this with the similar Kreg jig? Has anyone ever seen both and able to compare
Answer:	this is a real imperial dowel jig ,the hole is 1/4",not 6mm，don't worry ,please use your 1/4 drill bit!
Question:	Where is this made
Answer:	There is a small set screw on the collar. When you position the collar on the bit, make sure the set screw is positioned so that when you tighten it, it presses against the wide part of the spiral. You may need to rotate the collar around the bit to position it, then tighten the set screw until the collar is firmly held in place. If the collar that fits the bit you need doesn't have a set screw, remove one from one of the other collars and use it. (My set only had 2 set screws) The set screws are the same size.
Question:	does it include the clamp? If not how much extra is it
Answer:	This hose kit is a direct fit for the 2007-2011 model year Mini Cooper S, as noted in the Amazon description and the product page on Mishimoto.com. This hose kit should not require any additional modification for installation and normal functionality. If you have any other questions, please send an email to [email protected] and we would be happy to assist further. Thanks, Mishimoto
Question:	Have the thickness measures 1-1/4 and the drill bit set to length vs the markings and it dont even drill through? Something is off not sure what
Answer:	I installed the mishimoto hose kit on my 2010 mini cooper s, around 9 months ago. Since the install i have put about 10000 miles on the car. There has been no weep or leaking from any of the hoses, they are thick hoses aswell. You will have to trim the hoses to fit. When fitting the hoses make sure you have clearance for your transmission cables. If not then the cable might wear a hole in the hoses that run over the transmission.

Product features

Built-in Measurements

No marking out is required when using the Massca Jig. This pocket hole jig features a built-in workpiece thickness, drill depth setting, and set-up gauge for rapid checking of dimensions, fast operation, and quick drilling of joints.

Complete Set

Perfect for joinery carpentry and do-it-yourself woodworking projects. This set comes complete with a Massca Twin Jig, drill bit, stop collar, and hex key.

Magnetic Base

Thanks to its unique, magnetic quick-adjust base system, the design of the Massca Twin Pocket Hole Jig provides rapid and simple operation to make it one of the fastest and easiest jigs on the market. Magnetic base works great with any metal clamp.

Hardened Drill Guides & Wood Chip Relief

Our Massca Twin Pocket Hole Jig features a hardened steel center and wood chip opening to prevent blow out, reduce tear out, and ensure a long life.

Home Improvement Made Simple

The Massca Twin Pocket Hole Jig is the perfect tool for creating pocket holes with ease. Our tool was crafted for straightforward operation when creating STRONG and DURABLE pocket hole joints.

Clean Pocket Hole Cuts

The pocket joint involves accurately pre-drilling a pilot hole at an angle between two boards before connecting the two with a screw. Our Massca Pocket Hole Jig will make this process simple, keep measurements exact, and achieve beautiful looking pocket joints.

For New Projects Or Repairs

Use our pocket hole jig to create perfect pocket holes or to repair wood joints. it has a dual-setting to ensure accuracy for every type of project.

Massca Twin Pocket Hole Jig Set

Use the Massca Twin Jig to create custom carpentry build-ins or for any do-it-yourself projects. Our pocket hole jig is also a go-to tool for home improvements and repairs.

Bar Stools

Entry Way Benches

Night Stands & Head Boards

Desks

Decor Ladder

Bedroom Bench

Product description

"The Complete Pocket-Hole Kit for Building DIY Wood Projects The Kreg Pocket-Hole Jig 320 makes it easier than ever to build wood projects — whether you’re building your first DIY project, or you’ve been working with wood for years. The Pocket-Hole Jig 320 works with materials of any thickness between 1/2"" and 1 1/2"". It features two drill guides, a removable spacer, and stops for 1/2""- , 3/4""-, and 1 1/2""-thick material that give the versatility you need to build with boards and plywood. The included material thickness gauge and easy-set drill bit make setup simple, while the convenient clamp adapter and anti-slip base hold the jig precisely in position while you drill perfectly positioned pocket holes every time. The jig and its included components store in a durable, compact case that even has space to store Kreg Pocket-Hole Screws — with 40 sample screws included. Durable construction and hardened-steel guides with a lifetime ensure that the Kreg Pocket-Hole Jig 320 will deliver the years of project-building and home-repair satisfaction and value you expect from the #1 pocket-hole brand—Kreg. "

• Portable Jig for creating pocket-hole joints
• Secure positioning with anti-slip base and included clamp adapter
• Simple to set up and easy to use with material-thickness stops for common DIY materials: 1/2", 3/4", 1 1/2"
• Versatile design for building indoor and outdoor projects, and for making household repairs
• Convenient variable pocket-hole spacing with twist-apart drill guides and removable spacers
• Works with materials from 1⁄2" to 1 1⁄2" thick
• Secure positioning with anti-slip base and included clamp adapter
• Durable construction to last for years, with lifetime drill-guide

User questions & answers

Question:	hello . can i use this jig with metric (mm) wood ιn thikness? usually i work with 18mm and 25mm
Answer:	The Kreg Deck Screws are designed to only screw into wood and not into metal.
Question:	What is the difference between the 320 and the R
Answer:	It is their own bit. If you get the 525 count the bit comes with it
Question:	What size (diameter) is the drill bit
Answer:	I'm sorry to say we don't have stainless versions of the longer deck screws, only the standard-length 2" stainless deck screws for 1-1/4" material.
Question:	Do the screws to use to make pocket holes need to be a certain type? (I'm new but want to try). Does a jig use only a certain type of screw
Answer:	In My research prior to purchase, I recall reading that the coated screws work with all composite, hardwood and soft woods. The only thing different per material choice is the thickness of the decking determining the length of screw.

Product features

DIY Wood Projects Are Easier Than Ever

The all-new Kreg 300-Series Pocket-Hole Jigs are packed with features that make them easy for anyone to use – whether you’re building your first wood projects or you’ve been building for years. With two jig models plus a variety of accessories to choose from, the Kreg 300-Series provides the simplicity, versatility, and convenience you want, plus the durability and value you expect from Kreg – the #1 pocket-hole brand.

Simple To Use

Two hardened-steel drill guides, a removable spacer, and thickness stops for 1/2", 3/4", and 1 1/2" material, along with a material thickness gauge and easy-set drill bit make setup simple. A convenient clamp pad adapter and anti-slip base position the jig securely.

Easy-To-Use Material Thickness Gauge

The Material Thickness Gauge allows you to easily determine material thickness (½", ¾", 1½") and select the correct pocket-hole screw. It also has a built-in hex wrench for tightening the Easy-Set Stop Collar.

Easy-Set Drill Bit Design

The Drill Bit features etched markings for ½", ¾", and 1½" materials to match up with the Easy-Set Stop Collar. A ¼" hex shank fits all standard quick-change chucks. Compatible with all Kreg Pocket-Hole Jigs.

Store and Organize

The Pocket-Hole Jig and its included components all store in a durable, compact case that even has space to store Kreg Pocket-Hole Screws—with 20 1 1⁄4" zinc screws and 20 2 1⁄2" Blue-Kote screws included.

Product description

The Kreg jig® K4 is the perfect choice for do-it-yourselfers and anyone new to pocket-hole joinery. Whether you’re building your first set of garage storage shelves or making simple repairs around the house, The Kreg jig® K4 can help you finish the job in less time, and with FAR less effort than you ever thought possible. Its simple design gives you the confidence you need to get started, and you’ll have your project finished in no time with joints as easy as "drill. Drive. Done!"

From the Manufacturer

The Kreg Jig is the perfect choice for DIY'ers and anyone new to pocket-screw joinery. Whether you're building your first set of garage storage shelves or making simple repairs around the house, the Kreg Jig can help you finish the job in less time and with far less effort than you ever thought possible. Its simple design gives you the confidence to start the project and with joints as easy as "Drill. Drive. Done!" You'll actually want to finish it. The Kreg Jig makes every joint you build faster and stronger, but perhaps more importantly, it makes them easier. Simple two-step operation, combined with easy thickness adjustments, built-in depth-setting-gauges, a large clamping recess and our patented 3-hole drill guide, make this the most easy-to-use Kreg Jig we've ever made. Includes everything you need to get started with pocket-screw joinery, including Kreg Jig, stepped drill bit, 6-inch square driver, dust collection shroud, starter screw set, starter plug set, skill builder DVD and quick-start guide, all inside a compact and durable carrying case.

• 3-Hole drill guide for pocket holes, for use with materials from 12 to 38mm thick
• Removable drill guide block doubles as a repair tool; Drill Guide Spacings: 9/16", 7/8", 17/16"
• Large clamping recess to secure your jig; Removable Drill Guide for benchtop and portable use
• Requires no glue, no complicated math, and no small army of clamps.Clamping Method:Toggle clamp on benchtop base
• Includes Kreg Jig K4, stepped drill bit, 6 inch square driver, starter Kreg Screw set, pocket-hole plug set

User questions & answers

Question:	I am needing a jig for 4(in.)x4(in.)x10(ft.) wood post. i realize this wouldn't work, but can anyone recommend one that can? thanks in advance
Answer:	As it states in the description, deflects chips and connect 2 grippers for better control of large pieces. Check the video: https://d1y6jrbzotnyjg.cloudfront.net/V3MSA/cfd7863774ee4067ae4a3c816a4fd10e/V1/ad7607ded66c4f77898c5981786beb86/ShortForm-Generic-480p-16-9-1409173089793-rpcbe5.mp4?Expires=1552759553&Signature=TXTx0fF1p4Uzt68tNOVHzaO1K4UUbz1qJoX9WVsDe~ReJnbou3MLRqyMf2qM06MydXQMud4lf2zChbFp-YQbr7t731MJ2pn~tgK64bjXMcE1ko8UnnYlzgaBtLVGA4l4YXyBvhEk9ZREzLwvu0hXURT9-OHG-TkCcq1XN-stsmg_&Key-Pair-Id=APKAJ62XWKZ35EOVO4XA
Question:	Is it possible to use this kit with material thicker than 1-1/2 inches? I ask because the site offers spacer blocks for user with "thicker" material. It would be nice to use the kit on 2x4s for example
Answer:	The "deflector plate" is actually a gravity operated "heel" that simply drops down and hooks on the material you are pushing. There's considerable grip in the rubber pad portion of the push block, but when you reach the end of a board or similar, the heel drops down and catches on the edge of wood, permitting easy/secure push through of the wood.
Question:	how would i get a long piece of wood to position in the clamp, like an 8ft 2x4? I see short pieces stand up in the jig, would a long board be flimsy
Answer:	We have a video showing how to build a GRR-RIP BLOCK Stand that magnetically mounts to your jointer! Watch it on YouTube here: https://youtu.be/3qUBe90H-Q8
Question:	What country is this made in
Answer:	I don't have the Bench Dogs push pad but I do own 2 of these Gripper pads as well as several "plain" push pads. In my experience, the GRR-Rip Block is different in 2 ways. The Gripper has 4 "heel hooks" that hang over the edge of your work piece to get a better push on the end stock. And it can also be used on its edge (it have been formed with a 90 degree angle) so you can push stock on a router table or to stabilize wood while re-sawing on a band saw (and this is where those hooks really help). But the price of the Gripper is 2-1/2 times the Bench Dog, so the question would be: is the GRR-Rip Blockr twice as good as the Bench Dog. And I would probably say no to that. But the ultimate decision is of course yours. Hope this helped.

Product features

Kreg Jig K4