10 best kreg jig master system

Product description

"The Do-It-Yourself Kreg Jig with Bonus Accessories The Kreg Jig K4 Master System is a great choice for any woodworking enthusiast looking for a complete set to get started building with Kreg Joinery. With its solid clamp, large clamping recess, dust collection attachment, material support stop, and removable 3-hole drill guide, this jig truly has it all. The Master System includes a Kreg Jig K4, Bonus Kreg Accessories: the Kreg Face Clamp, Portable Base, and more. Large Clamping Recess The Large Clamping Recess makes it easy to secure your jig to your workbench using Kreg multi-purpose Face Clamps or any common bar clamp or C-clamp. Sturdy Toggle-Clamp The Kreg Jig K4's rear-mounted clamp design has been around since the first Kreg Jig. It's a proven design, offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the locknut and rotating to the correct setting. 3 Tools in 1 Thanks to its removable Drill Guide, the Kreg Jig K4 Master System can serve as many different tools: a sturdy benchtop jig that utilizes the benchtop base for high speed pocket holes, a contractor-grade jig for work on the road through the use of the portable base, and a high-quality repair jig when you add spacer blocks to the bottom of the drill guide. 3-Hole Drill Guide The 3-hole Drill Guide lets you drill pocket holes in a wide variety of material widths and thicknesses—from 1/2"" to 1 1/2"" in 1/8"" increments. Every Kreg Drill Guide features a hardened-steel core, which carries a lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean, pluggable pocket hole. Material Support Stop The Material Support Stop can be set at any distance from the jig to help you repeat the same pocket holes over and over again. The stop can also be swung out of the way to serve as a height support for larger panels. Glass-Reinforced Nylon Body The blue body of every Kreg Jig K4 is made from a heavy-duty, glass-reinforced nylon. This composite material offers the resiliency and flexibility you need without sacrificing the strength and durability Kreg customers have come to expect. Superior Angle Unlike competing jigs with a shallower angle of approach, the Kreg Jig K4 Master System features an optimized drilling angle, specifically designed to increase driving efficiency and minimize the overall size of the pocket hole. The result is a compact pocket hole, less than 1 1/2"" in size. Wood-Chip Relief The Kreg Jig K4 Master System includes one wood-chip relief hole for every Drill Guide hole, designed to keep the drill bit clear of excess wood chips, minimize drill torque, increase the longevity of your drill bits, and allow you to complete a perfect pocket hole in just one plunge. Featuring a removable drill guide for use with benchtop and portable bases, the Kreg Jig Master System is the ultimate pocket-hole jig, and a great choice for any woodworking enthusiast. For precision and accuracy, it offers 1/8-inch incremental settings for materials 1/2-inch to 1-1/2-inch thick and patented three drill guide fixed spacing on the drill guide. A dust collection shroud means no more woodchips, and the clamping recess allows you to use many different styles of clamps to secure your jig to the workbench. For peace of mind, the hardened steel drill guides are backed by a lifetime warranty."

Featuring a removable drill guide for use with benchtop and portable bases, the Kreg Jig Master System is the ultimate pocket-hole jig, and a great choice for any woodworking enthusiast. For precision and accuracy, it offers 1/8-inch incremental settings for materials 1/2-inch to 1-1/2-inch thick and patented three drill guide fixed spacing on the drill guide. A dust collection shroud means no more woodchips, and the clamping recess allows you to use many different styles of clamps to secure your jig to the workbench. For peace of mind, the hardened steel drill guides are backed by a lifetime warranty.

From the Manufacturer

The Kreg Jig Master System is the ultimate pocket-hole jig and a great choice for any woodworking enthusiast. Between its solid clamp, large clamping recess, dust-collection attachment, material support stop, removable 3-hole drill guide, and seemingly endless adjustability, this jig truly has it all! The large clamping recess makes it easy to secure your jig to your workbench using Kreg multi-purpose face clamps or any common bar clamp or c-clamp, and the rear-mounted clamp design is a proven design, offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the lock-nut, and rotating to the correct setting. Thanks to the innovative removable drill guide, the Kreg Jig Master can be many tools at once. First, a sturdy bench top jig utilizing the bench top base for high-speed production pocket-holes, then a contractor-grade jig for work on the road through the use of the portable base, and also a high quality repair jig with the addition of spacer blocks to the bottom of the drill guide. The patented 3-hole drill guide lets you make perfectly placed pocket-holes in a wide variety of material widths and thicknesses (from 1/2-Inch to 1-1/2-Inch, in 1/8-Inch increments). Every Kreg drill guide features a hardened steel core which carries a full lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean pluggable pocket-hole.

• Glass filled nylon
• Imported
• Removable Drill Guide for use with benchtop and portable bases
• Patented 3-hole drill guide allows you to make perfectly placed Pocket-Holes in a wide variety of material widths and thicknesses
• 1/8-Inch incremental settings for materials from 1/2-Inch to 1-1/2-Inch thick
• Dust Collection Shroud - Say goodbye to woodchips. The case is not included.
• Large clamping recess allows you to use many different styles of clamps to secure your jig to the workbench
• Kit contains: Kreg Jig K4, Stepped Drill bit and stop collar, 6" square-drive bit, Starter screw set and plug set, Face clamp, Portable base, Material support stop, Dust collection attachement

User questions & answers

Question:	Does this work on particle board
Answer:	For boards it will work well. If you are cutting sheet goods I would still recommend a cross cut sled, all depending on width and length of course. I isn't designed to hold board tight but its more of a stop for many cuts the same size. There is a little play in the stop, so it is not perfect, but it is workable.
Question:	Doing small - medium sized DIY projects, what is the best jig for me? This one, the Kreg R3 Jr. or
Answer:	It will work with any saw that has a 3/4*3/8" miter slot
Question:	NEVER MIND ** I can't find a way to remove the question, but if anyone else is curious I did some digging around on the Kreg site last night and came across a video of the "micro", basically yes this larger set can do a 1/2" however the micro produces smaller holes which is preferred with thinner stock. I hated spen
Answer:	The kit I purchased had the jig,a bit, two drawer box supports, two clamps , and handle /knob drilling guide. As I do custom install and have to modify in the field the entire kit has been helpful and accurate all while being easy to adjust and set up on the job . Would recommend highly!
Question:	What does this include that the regular kit ($99) does not include? Are those items essential or useful? Trying to decide which kit to get. Thanks
Answer:	Yes. I am a beginner, and was seeking a user friendly joining method. Kreg pocket-hole Jig is a handy tool. Practice a couple of holes on scrap wood to perfect your spacing and usage.

Product features

Kreg Jig K4 Master System

The Do-It-Yourself Kreg Jig with Bonus Accessories:

The Do-It-Yourself Kreg Jig with Bonus Accessories

The Kreg Jig K4 Master System is a great choice for any woodworking enthusiast looking for a complete set to get started building with Kreg Joinery. With its solid clamp, large clamping recess, dust collection attachment, material support stop, and removable three-hole drill guide, this jig truly has it all. The Master System includes a Kreg Jig K4, Bonus Kreg Accessories: the Kreg Face Clamp, Portable Base, and more.

Sturdy Toggle-Clamp

The Kreg Jig K4's rear-mounted clamp design has been around since the first Kreg Jig. It's a proven design, offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the locknut, and rotating to the correct setting.

Three-Hole Drill Guide

The 3-hole Drill Guide lets you drill pocket holes in a wide variety of material widths and thicknesses—from 1/2 to 11/2 inch in 1/8 inch increments. Every Kreg Drill Guide features a hardened-steel core, which carries a lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean, pluggable pocket hole.

Dust Collection

Superior Dust Collection to keep your shop/garage looking new

Product description

The Kreg Jig K5 Master System combines the Kreg Jig K5 with premium accessories to make it even easier to get started building with Kreg Joinery. Accessories include an Automaxx Face Clamp with 3 inch reach, a Portable Base for building on the go, and downloadable plans for six projects. The Automaxx Face Clamp features auto-adjust technology that simplifies project construction by allowing you to clamp workpieces of varying thicknesses without having to adjust the clamp. That makes it the perfect companion to the ratcheting, tool-free workpiece clamp on the K5. Adding the Portable Base gives you yet another use for your Kreg Jig K5—simplified setup for portable building and making repairs. Plus, the Kreg Jig K5 Master System includes downloadable plans for six great home projects so that you can get started building right away. Fast, Simple Setup When you’re ready to get started building, the Kreg Jig K5 makes it simple. Just select your screw based on the thickness of your wood, set the stop collar using the drill bit setup block, pull the spring-loaded pin to adjust the drill-guide block, and then set the workpiece clamp. Easy Thickness Adjustment The Kreg Jig offers our simplest workpiece-clamping system ever. The ratcheting clamp simply slides into place against your workpiece. Then, you lift the handle until you hear and feel two 'clicks' and that’s it. Now your clamp is set until you change to a different material thickness. Support with Built-In Storage Two large support wings can be attached to both sides of the K5 base. This way, long workpieces get solid support and won’t tip. Plus, there’s a large storage compartment under the lid in each wing where you can keep your drill bits, screws, and accessories close at hand, but out of the way.

• The Kreg Jig K5 Master System combines the Kreg Jig K5 with premium accessories to make it even easier to get started building with Kreg Joinery. Accessories include an Automaxx Face Clamp with 3 inch reach, a Portable Base for building on the go, and downloadable plans for six projects.
• The Automaxx Face Clamp features auto-adjust technology that simplifies project construction by allowing you to clamp workpieces of varying thicknesses without having to adjust the clamp. That makes it the perfect companion to the ratcheting, tool-free workpiece clamp on the K5.
• Adding the Portable Base gives you yet another use for your Kreg Jig K5—simplified setup for portable building and making repairs. Plus, the Kreg Jig K5 Master System includes downloadable plans for six great home projects so that you can get started building right away.
• Swiveling Dust Collection The Kreg Jig K5 comes with a removable dust port that swivels from side to side so that you can position it exactly where you want it, and then attach it to a standard vacuum house.
• Two large support wings can be attached to both sides of the K5 base. This way, long workpieces get solid support and won’t tip. Plus, there’s a large storage compartment under the lid in each wing where you can keep your drill bits, screws, and accessories close at hand, but out of the way.

User questions & answers

Question:	Have they resolved the issues with the ratcheting clamp
Answer:	The 520 jig will work on material between 1/2" and 1 1/2" thick. So yes, it can be used on a standard 2x4 (1.5" x 3.5").
Question:	What is thickness range on material
Answer:	You will be using the 3/4" settings and the 1-1/2" screw.
Question:	Is the master set worth the extra money versus the k5 alone? I have my own clamps, etc
Answer:	The Kreg 520PRO is designed to work with the Kreg Pocket-Hole Jig Clamp KPHA760.
Question:	Hi, Is this kreg jig in Imperial or metric units? Thanks
Answer:	The Kreg Jig 520 is designed to work with any material thickness from ½” to 1-1/2”. The 3 setting are a simplification of the Jig/Drill bit set up process that allow the user to work with different thickness of within each of the 3 size ranges.

Product features

Kreg Jig K5 Master System

The Kreg Jig K5 Master System combines the Kreg Jig K5 with premium accessories to make it even easier to get started building with Kreg Joinery.

Fast, Simple Setup

When you’re ready to get started building, the Kreg Jig K5 makes it simple. Just select your screw based on the thickness of your wood, set the stop collar using the drill bit setup block, pull the spring-loaded pin to adjust the drill-guide block, and then set the workpiece clamp.

Easy Thickness Adjustment

The Kreg Jig offers our simplest workpiece-clamping system ever. The ratcheting clamp simply slides into place against your workpiece. Then, you lift the handle until you hear and feel two 'clicks' and that’s it. Now your clamp is set until you change to a different material thickness.

Support with Built-In Storage

Two large support wings can be attached to both sides of the K5 base. This way, long workpieces get solid support and won’t tip. Plus, there’s a large storage compartment under the lid in each wing where you can keep your drill bits, screws, and accessories close at hand, but out of the way.

Swiveling Dust Collection

The Kreg Jig K5 comes with a removable dust port that swivels from side to side so that you can position it exactly where you want it, and then attach it to a standard vacuum house. This keeps your work area free of chips and debris, makes drilling easier, and prolongs drill bit life by reducing heat.

Classic Coffee Table

Garage Organizer

Modular Media Center

Coffee Table with Storage

Entryway Organizer

Glass-Door Media Center

Product description

The Kreg Jig K5 Master System combines the Kreg Jig K5 with premium accessories to make it even easier to get started building with Kreg Joinery. Accessories include an Automaxx Face Clamp with 3" reach, a Portable Base for building on the go, and step-by-step downloadable plans for six great projects. The new Automaxx Face Clamp features auto-adjust technology that simplifies project construction by allowing you to clamp work pieces of varying thicknesses without ever having to adjust the clamp. That makes it the perfect companion to the ratcheting, tool-free work piece clamp on the Kreg Jig K5. Adding the Portable Base gives you yet another use for your Kreg Jig K5-simplified setup for portable building and making repairs. The Kreg Jig offers our simplest work piece-clamping system ever. The ratcheting clamp simply slides into place against your work piece. Then, you lift the handle until you hear and feel two "clicks," and that's it. Now your clamp is set until you change to a different material thickness. Two large support wings can be attached quickly and easily to both sides of the K5 base. This way, long work pieces get solid support and won't tip. The Kreg Jig K5 comes with a removable dust port that swivels from side to side so that you can position it exactly where you want it, and then attach it to a standard vacuum house. Get started building with these step-by-step, downloadable project plans. You get three great plans, each with two design variations.

• Front-mounted handle makes clamping easy
• Ratcheting clamp mechanism adjusts without tools
• Storage wings provide built-in storage for bits and Accessories
• Swiveling dust collection port accepts any standard vacuum hose
• Adjustable work piece stop mounts on either side for easy repeat drilling

User questions & answers

Question:	Does this Master System kit come with a set of pocket-hole screws and pocket hole wood dowel fillers? If so, how many
Answer:	Yes, it comes with a stop collar.
Question:	Hi, I'd like to purchase the k5 master system with metric units. How can this be done
Answer:	You need the Kreg Custom Pocket-Hole Plug Cutter to use this bit
Question:	Hi, Is this kreg jig in Imperial or metric units? Thanks
Answer:	Hello, You will need to purchase the KPCS Kreg Custom Pocket-Hole Plug Cutter. That will come with the Standard 3/8" Plug Cutting Bit and Block that will slide into your K5 Jig. Thank You, Billy H Kreg Tech Support
Question:	Does purchasing from Amazon negate the Kreg warranty
Answer:	The kit i purchased only came with one clamp, but since the ad shows three clamps and the description uses the term "Clamp Bundle" I would assume that this kit comes with three clamps.

Product features

Kreg Jig K5 Master System

The Kreg Jig K5 Master System combines the Kreg Jig K5 with premium accessories to make it even easier to get started building with Kreg Joinery.

Fast, Simple Setup

When you’re ready to get started building, the Kreg Jig K5 makes it simple. Just select your screw based on the thickness of your wood, set the stop collar using the drill bit setup block, pull the spring-loaded pin to adjust the drill-guide block, and then set the workpiece clamp.

Easy Thickness Adjustment

The Kreg Jig offers our simplest workpiece-clamping system ever. The ratcheting clamp simply slides into place against your workpiece. Then, you lift the handle until you hear and feel two 'clicks' and that’s it. Now your clamp is set until you change to a different material thickness.

Support with Built-In Storage

Two large support wings can be attached to both sides of the K5 base. This way, long workpieces get solid support and won’t tip. Plus, there’s a large storage compartment under the lid in each wing where you can keep your drill bits, screws, and accessories close at hand, but out of the way.

Swiveling Dust Collection

The Kreg Jig K5 comes with a removable dust port that swivels from side to side so that you can position it exactly where you want it, and then attach it to a standard vacuum house. This keeps your work area free of chips and debris, makes drilling easier, and prolongs drill bit life by reducing heat.

Classic Coffee Table

Garage Organizer

Modular Media Center

Coffee Table with Storage

Entryway Organizer

Glass-Door Media Center

Product description

Front-mounted handle  Ratcheting clamp mechanism  Storage wings  Swiveling dust collection port Adjustable work piece stop mounts 

• K5MS with CLAMPS, SCREWS and CLAMP BUNDLE INCLUDES: The K5 Master System which comes with the K5 Jig, Portable Kreg Jig, Automaxx 3" Face Fram Clamp, Pocket Hole Drill Bit with Depth Stop, 6 inch driver and Drill Bt Setup Gauge.
• ALSO INCLUDED: SK03 assorted pocket hole screw kit (675 screws), KHCRA Kreg Right and Clamp and KHC6 6" Face Frame Clamp.
• This special bundle combines the most advanced Kreg Jig available with great accessories to make project building and assembly easier.
• It starts with the most advanced Kreg Jig yet, the K5 Master System. With the easy to setup and use jig, you'll be building and creating new projects with relative ease.
• This is the ideal bundle for beginners and professionals alike. As with all Kreg Jigs, the process is simple, the results are excellent and your satisfaction is our goal.

User questions & answers

Question:	Comes with the 3 clamps show in the picture
Answer:	If you mean fasten, then yes; but only if the timbers are sufficiently cured to avoid twisting and warping after installation. I recommend 3 on the long side and 2 on the short side. If using cedar, 2 and 2 may suffice. 4 inch GRKs, or longer, will hold better, but are harder to recess, although fewer will be required.
Question:	What is the difference between the two k5 master system with screws and clamps offered other than price? why is one more expensive than the other
Answer:	They are square drive screws.
Question:	Does the k5 master kit come with 1 clamp or three? The image used doesn't match the description
Answer:	Yes, they are. I just finished a project using these and 2X6s. You end up using three screws per joint rather than two per joint for 2x4s.
Question:	Where is this made
Answer:	I just measured one with a ruler. The shank of the screw is dead on 2 1/2 inches.

Product features

Kreg Jig K5 Master System

The Kreg Jig K5 Master System combines the Kreg Jig K5 with premium accessories to make it even easier to get started building with Kreg Joinery.

Fast, Simple Setup

When you’re ready to get started building, the Kreg Jig K5 makes it simple. Just select your screw based on the thickness of your wood, set the stop collar using the drill bit setup block, pull the spring-loaded pin to adjust the drill-guide block, and then set the workpiece clamp.

Easy Thickness Adjustment

The Kreg Jig offers our simplest workpiece-clamping system ever. The ratcheting clamp simply slides into place against your workpiece. Then, you lift the handle until you hear and feel two 'clicks' and that’s it. Now your clamp is set until you change to a different material thickness.

Support with Built-In Storage

Two large support wings can be attached to both sides of the K5 base. This way, long workpieces get solid support and won’t tip. Plus, there’s a large storage compartment under the lid in each wing where you can keep your drill bits, screws, and accessories close at hand, but out of the way.

Swiveling Dust Collection

The Kreg Jig K5 comes with a removable dust port that swivels from side to side so that you can position it exactly where you want it, and then attach it to a standard vacuum house. This keeps your work area free of chips and debris, makes drilling easier, and prolongs drill bit life by reducing heat.

Classic Coffee Table

Garage Organizer

Modular Media Center

Coffee Table with Storage

Entryway Organizer

Glass-Door Media Center

Product description

The Kreg jig® K4 is the perfect choice for do-it-yourselfers and anyone new to pocket-hole joinery. Whether you’re building your first set of garage storage shelves or making simple repairs around the house, The Kreg jig® K4 can help you finish the job in less time, and with FAR less effort than you ever thought possible. Its simple design gives you the confidence you need to get started, and you’ll have your project finished in no time with joints as easy as "drill. Drive. Done!"

From the Manufacturer

The Kreg Jig is the perfect choice for DIY'ers and anyone new to pocket-screw joinery. Whether you're building your first set of garage storage shelves or making simple repairs around the house, the Kreg Jig can help you finish the job in less time and with far less effort than you ever thought possible. Its simple design gives you the confidence to start the project and with joints as easy as "Drill. Drive. Done!" You'll actually want to finish it. The Kreg Jig makes every joint you build faster and stronger, but perhaps more importantly, it makes them easier. Simple two-step operation, combined with easy thickness adjustments, built-in depth-setting-gauges, a large clamping recess and our patented 3-hole drill guide, make this the most easy-to-use Kreg Jig we've ever made. Includes everything you need to get started with pocket-screw joinery, including Kreg Jig, stepped drill bit, 6-inch square driver, dust collection shroud, starter screw set, starter plug set, skill builder DVD and quick-start guide, all inside a compact and durable carrying case.

• 3-Hole drill guide for pocket holes, for use with materials from 12 to 38mm thick
• Removable drill guide block doubles as a repair tool; Drill Guide Spacings: 9/16", 7/8", 17/16"
• Large clamping recess to secure your jig; Removable Drill Guide for benchtop and portable use
• Requires no glue, no complicated math, and no small army of clamps.Clamping Method:Toggle clamp on benchtop base
• Includes Kreg Jig K4, stepped drill bit, 6 inch square driver, starter Kreg Screw set, pocket-hole plug set

User questions & answers

Question:	I am needing a jig for 4(in.)x4(in.)x10(ft.) wood post. i realize this wouldn't work, but can anyone recommend one that can? thanks in advance
Answer:	As it states in the description, deflects chips and connect 2 grippers for better control of large pieces. Check the video: https://d1y6jrbzotnyjg.cloudfront.net/V3MSA/cfd7863774ee4067ae4a3c816a4fd10e/V1/ad7607ded66c4f77898c5981786beb86/ShortForm-Generic-480p-16-9-1409173089793-rpcbe5.mp4?Expires=1552759553&Signature=TXTx0fF1p4Uzt68tNOVHzaO1K4UUbz1qJoX9WVsDe~ReJnbou3MLRqyMf2qM06MydXQMud4lf2zChbFp-YQbr7t731MJ2pn~tgK64bjXMcE1ko8UnnYlzgaBtLVGA4l4YXyBvhEk9ZREzLwvu0hXURT9-OHG-TkCcq1XN-stsmg_&Key-Pair-Id=APKAJ62XWKZ35EOVO4XA
Question:	Is it possible to use this kit with material thicker than 1-1/2 inches? I ask because the site offers spacer blocks for user with "thicker" material. It would be nice to use the kit on 2x4s for example
Answer:	The "deflector plate" is actually a gravity operated "heel" that simply drops down and hooks on the material you are pushing. There's considerable grip in the rubber pad portion of the push block, but when you reach the end of a board or similar, the heel drops down and catches on the edge of wood, permitting easy/secure push through of the wood.
Question:	how would i get a long piece of wood to position in the clamp, like an 8ft 2x4? I see short pieces stand up in the jig, would a long board be flimsy
Answer:	We have a video showing how to build a GRR-RIP BLOCK Stand that magnetically mounts to your jointer! Watch it on YouTube here: https://youtu.be/3qUBe90H-Q8
Question:	What country is this made in
Answer:	I don't have the Bench Dogs push pad but I do own 2 of these Gripper pads as well as several "plain" push pads. In my experience, the GRR-Rip Block is different in 2 ways. The Gripper has 4 "heel hooks" that hang over the edge of your work piece to get a better push on the end stock. And it can also be used on its edge (it have been formed with a 90 degree angle) so you can push stock on a router table or to stabilize wood while re-sawing on a band saw (and this is where those hooks really help). But the price of the Gripper is 2-1/2 times the Bench Dog, so the question would be: is the GRR-Rip Blockr twice as good as the Bench Dog. And I would probably say no to that. But the ultimate decision is of course yours. Hope this helped.

Product features

Kreg Jig K4

Product description

The Home Improver's Solution for Building with Wood What is a Kreg Jig? With the Kreg R3 Jr. Pocket Hole Jig, you can build bookcases, shelves, and storage projects for your home. It's also great for creating custom built-ins, and countless other home improvement projects. Plus, the Kreg Jig R3 can be used portably to make lasting repairs around your home. Clamp Pad Adapter The Kreg Jig R3 includes a Clamp Pad Adapter, which allows the R3 to be easily secured to your work piece using any standard bar clamp, C-clamp, or Kreg Face Clamp. For faster and more repeatable pocket holes, choose a Kreg Face Clamp. Material Thickness Setting Independent positioning sliders feature nine depth settings, allowing you to easily join materials from 1/2" to 1 1/2" thick in 1/8" increments. Dual Positioning Sliders Dual positioning sliders help you properly set your jig based on the thickness of the material you are working with. Simply depress the button on the side of the jig and move the sliders so your material thickness is aligned with the arrow on the jig body. Superior Angle Unlike competing jigs with a shallower angle of approach, the Kreg Jig Jr. features an optimized drilling angle specifically designed to increase driving efficiency and minimize the overall size of the pocket hole. Wood-Chip Relief The Kreg Jig R3 includes one wood-chip relief hole for every drill guide hole, designed to keep the drill bit clear of excess wood chips, minimizing drill-torque, increasing the longevity of your drill bits, and allowing you to complete a perfect pocket hole in just one plunge. Bundle Includes: Kreg Jig R3 Pocket Hole SK04 Pocket-Hole Screw Starter Classic 2" Face Clamp

• Home improvement helper: with the KREG R3 Jr. Pocket Hole Jig, you can build bookcases, shelves, and storage projects for your home. It's also great for creating custom built-ins, and countless other home improvement projects. Plus, the KREG jig R3 can be used portable to make lasting repairs around your home.
• Glass-reinforced nylon body: The blue body of every KREG jig is made from a heavy-duty, glass-reinforced nylon. This composite material offers The resiliency and flexibility you need without sacrificing the strength and durability KREG customers have come to expect.
• Hardened steel core: The core of every KREG jig R3 features hardened-steel, which carries a lifetime . The KREG jig R3 core shrouds the bit and supports the work piece through 100% of the drill-stroke. The end result is minimal bit deflection, reduced tear-out, and a clean,
• Compact case: a compact yet durable carrying case is included so that you'll always have a safe place to store your KREG jig R3 and organize all of the accessories It comes with. As a bonus, a depth Collar gauge has been molded into the case for handy reference.
• Bundle includes: KREG jig R3 pocket Hole system with KREG SK04 pocket-hole screw starter kit and KREG Classic 2" Face Clamp

User questions & answers

Question:	Is it normal to have blue shavings while drilling? everytime i drill i have blue shavings from it. is mine defective
Answer:	You can buy it on Amazon. Search for"pocket hole screw "and choose the model: 1-1 / 4 "# 8 coarse thread
Question:	Does this kit come with a box to store the Kreg
Answer:	This can be used for repairs and small project assembly.
Question:	What is the difference between the 1 Pack and the 2 Pack item
Answer:	You get 1" coarse , 1 1/4" fine , 1 1/4" coarse, 1 1/2" coarse, 2" coarse, 2 1/2" coarse unfortunately you only get 10 screws in each size with the set so be aware you are going to be needing more no matter what for any project but a nice set to start of with
Question:	isnt this the same as the r3 model with clamp. Just also comes with extra assorted screws? Thanks for help
Answer:	This product is designed in the USA and made in China.

Product description

The Kreg Jig K5 Master System (Item# K5MS) combines the popular Kreg Jig K5 with premium accessories. The Master System adds a 3" Automaxx auto-adjusting Face Clamp, as well as a Portable Base to the Kreg Jig K5. The Automaxx Face clamp offers auto-adjust technology that simplifies project construction by allowing customers to clamp pieces of varying thicknesses without having to adjust the clamp. That makes it the perfect companion to the ratcheting, tool-free workpiece. Includes portable base and downlodable plans. 2 The all-new System Organizer is the perfect place to store and organize all of your Kreg JoineryTM system parts - your Kreg Jig, Kreg Clamps, Kreg Screws, drill and driver bits, and more. A portion of the Organizer's tray can be removed for storage of other items such as the Kreg Shelf Pin Jig, compact drills and drivers, and more. It's easy to keep track of everything stored in the System Organizer thanks to a transparent lid. A pair of heavy-duty clasps ensure that lid stays shut, and a large handle makes the Organizer easier to carry and take your Kreg tools on the go. The System Organizer has a custom-fitted insert to hold the following items: 1 Kreg Jig (K5, K4, or K3 model) Kreg Jig K5 Storage Wings 4 Standard Stepped Drill Bits 7 Standard 6" or 3" Square-Drive Bits 3 Stop-Collar Hex Wrenches Micro-PocketTM Drill Guide Block 2 Micro-PocketTM Drill Bits Kreg Jig HD (Heavy-Duty) Kreg Jig HD Drill Bit Kreg Jig HD Square-Drive Bit Kreg Clamps Up to 6 Kreg Screw 100-count Containers In addition, a portion of the Organizer's tray can be removed for storage of other items such as: Up to 6 Kreg Screw 500-count Containers Additional Clamps Kreg Shelf-Pin Jig Compact Drills and Drivers It's easy to keep track of everything stored in the System Organizer, too, thanks to a transparent lid. A pair of heavy-duty clasps ensure that lid stays shut, and a large handle makes the Organizer easy to carry.

• The Most Advanced Kreg Jig Yet, Plus Premium Kreg Accessories
• Comes with Kreg Jig K5 and accessories: Automaxx Face Clamp with 3" reach, Portable Base, plans
• Durable Construction, Made in the USA Visible Case Contents
• Custom Tool Inserts, Versatile Storage Bays
• The Storage Solution for Kreg Jigs and Accessories

User questions & answers

Question:	There are a ton o kreg kits out there. i'm new to woodworking and have a few clamps. i'd like a pocket screw jig but what kit should i buy
Answer:	Hello, If the poplar is actually 1-1/2 inches thick, you can use the 2-1/2 inch coarse thread screws. Thanks!
Question:	Does this come with the five sizes of screws
Answer:	The blue kote screws are foroutside use also. There is no difference between the two. They are the best we have used.
Question:	Does this come with the micro insert
Answer:	YES

Product description

The Kreg Jig Master System is the ultimate pocket-hole jig and a great choice for any woodworking enthusiast. Between its solid clamp, large clamping recess, dust-collection attachment, material support stop, removable 3-hole drill guide, and seemingly endless adjustability, this jig truly has it all! The large clamping recess makes it easy to secure your jig to your workbench using Kreg multi-purpose face clamps or any common bar clamp or c-clamp, and the rear-mounted clamp design is a proven design, offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the lock-nut, and rotating to the correct setting. Thanks to the innovative removable drill guide, the Kreg Jig Master can be many tools at once. First, a sturdy bench top jig utilizing the bench top base for high-speed production pocket-holes, then a contractor-grade jig for work on the road through the use of the portable base, and also a high quality repair jig with the addition of spacer blocks to the bottom of the drill guide. The patented 3-hole drill guide lets you make perfectly placed pocket-holes in a wide variety of material widths and thicknesses (from 1/2-Inch to 1-1/2-Inch, in 1/8-Inch increments). Every Kreg drill guide features a hardened steel core which carries a full lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean pluggable pocket-hole.

• Drill Guide includes 3-hole fixed spacing and is removable for benchtop and portable use
• For use with materials 1/2" to 1 1/2" (12-38mm) thick in 1/8" (3mm) incremental settings
• Dust-Collection Shroud collects wood chips as you work. Material Support Stop for consistently repeating hole spacings
• Features a large clamping recess making it easy to secure your jig to your workbench. Rear-mounted sturdy toggle-clamp offers incredible rigidity and uncompromising workpiece hold-strength
• Includes: Pocket-Hole Jig K4, Stepped Drill Bit, 6" Square-Drive Bit, Screw and Plug Sample Pack, 3" Face Clamp, Portable Base, Drill-Guide Spacer, Material Support Stop, Dust-Collection Attachment, Kreg SML-C125 100-pack Pocket-Hole Screws

Product description

Kreg KJMICRODGB Jig Micro Drill Guide System

From the Manufacturer

The new Kreg micro pocket drill guide allows woodworkers to drill a pocket-hole which is 25-Percent smaller than our standard pocket-holes and is perfect for use with 1/2-Inch material. The smaller pocket-hole and shorter 3/4-Inch pan head screws work to secure thinner materials and still keep the head of the screw below your fi nished surface, while at the same time easing the drill stroke and creating smaller more low-profile pocket-holes for every day use.

• The new Kreg micro pocket drill guide allows woodworkers to drill a pocket-hole
• The smaller pocket-hole and shorter 3/4-Inch pan head screws work to secure thinner materials
• Fully compatible with the Kreg Jig and Kreg Jig Master System
• Smaller pocket-hole is less noticeable on exposed joints
• Features full compatibility with spacer blocks
• Drill guide works in the Kreg Jig or Kreg Jig master system
• Removable design is perfect for repairs and job-site joinery

User questions & answers

Question:	so if im building a desk out of 3/4 inch birch plywood should i buy this and use this instead of the master regular blue set i planned on getting
Answer:	I do a lot of wood working and This jig set will go 1/2 up. I have not seen the "micro" version but this jig set will save you a lot of time and make building a lot easier and faster. just make sure to practice with some scrap wood and don't rush your project. Make sure you get the proper screws for hard or soft wood and the proper depth for the wood you are working with. and above all enjoy and have fun
Question:	Descriptions says 1/2 stock. Do they mean 1/2 inch actual thickness or 3/8 inch actual
Answer:	I think it has the screw pack, and maybe the clamp. I'm not exactly sure. I will tell you that this is the coolest thing I've had in my years of tinkering. I'm not an expert at making joints/joinery. But this makes things very simple, and fast. You'll need the extra packs of screws that comes with this, because you can go through a lot of screws quickly. I really liked the clamp, and actually ordered another one (although messed up and didn't get one exactly like it). These clamps could hold both houses of congress together. I'm making my first work bench in the garage, trying to use only the tools I have, power saw, drill, router. This kit makes it really go together quickly, and it looks pretty decent (not furniture grade, but I'm just trying it). I'm a 5-star believer. I think I've had it about 3 or 4 months.
Question:	Hi, I am not understanding? My Kreg jig has a measurement for one half inch...so why do I need this
Answer:	Most slots are standard size: From Kreg miter guage site: The extremely straight 24-inch anodized aluminum bar is 3/8-inch tall by 3/4-inch wide and features five bar adjusters that eliminate "play" in the miter slot with the turn of a screw driver.
Question:	Will this work with all of the Kreg screws
Answer:	I have a Grizzly, cab. saw, it works well. Pretty much universal for the grove. As for your particular saw I can not tell you 100%. But Kreg is a great company and they build a fine product. I would think all of Grizzly tables are similar in the grove.

Product features

Micro-Pocket Drill Guide

Create More Compact Pocket Holes in the Same Kreg Joinery Applications

With a 25% smaller hole diameter, the Micro-Pocket Drill Guide lets you create compact, low-profile pocket holes in the same Kreg Joinery applications where you'd use standard Kreg pocket holes, and in a variety of other applications, too. You also have the ability to tackle smaller projects, thinner stock, and tighter repairs where standard pocket holes simply can’t go.

Choose Your Jig

Compatible with the Kreg Jig K3, K4, and K5. Features black color to differentiate from the standard Kreg Drill Guide.

Endless Applications

A 25% smaller pocket hole works great in virtually every application where you’d use standard Kreg pocket holes. And because it removes less material, drill strokes are faster and easier.

Perfect for 1/2" Stock

Screw heads seat well below the material surface in thin stock, making the Micro-Pocket Drill Guide perfect for creating fully-pluggable pocket holes in 1/2" (12mm) thick material like drawer boxes.

Perfect for Narrow Stock

Reduced width lets you drill two holes in extremely narrow stock, down to 1" wide, creating a much stronger joint in narrow pieces.

Product description

Keg R3 Jr. Pocket Hole Jig System The Keg Jig Jr. takes advantage of a technique called Keg Joinery. Unlike other techniques, Keg Joinery requires no glue, no complicated math, and no small army of clamps to make wood joints that will last. With Keg Joinery, you can finish projects in hours instead of days. You won' t spend any time clamping, waiting for glue to dry, or wading through complicated math. It essentially involves drilling a hole at an angle into one work piece, and connecting it to another work piece with a self-tapping screw. Keg Jig Jr: The Perfect Home-Repair Tool The Keg Jig Jr. is an amazing repair jig with a compact design that lets you work where you need to most. Thanks to its Clamp Pad Adapter, the Jr. can be secured to the work piece with any standard bar clamp or c-clamp. In addition, the adapter allows the jig to be attached directly to any Keg Face Clamp (sold separately) for faster and more repeatable pocket-holes. From thin drawer boxes and craft projects to stout 2x4' s, this jig can handle them all. Independent Easy-Press positioning sliders feature nine separate depth settings, allowing you to easily join materials from 1/2-inch to 1-1/2-inches thick in 1/8-inch increments. And to set the jig properly, you simply depress the button on the side of the jig and move the sliders so your material thickness is aligned with the arrow on the jig body. It could' t be any easier. The Keg Jig Jr. includes a compact, durable plastic carrying case that will ensure that you always have the tool, drill bit, and screws on hand to complete your next project. As a bonus, the case features a molded depth collar gauge for a handy reference. Bundle Includes Keg R3 Jr. Pocket Hole Jig System Keg Classic 2" Face Clamp

• ‼️ATTENTION‼️ THIS IS NOT A 2 PACK‼️The icon in the upper left hand corner is being displayed incorrectly due to an amazon software glitch.
• The Kreg Jig Jr(R3) is an amazing repair jig and an exceptionally handy addition to any tool collection
• Easy to use and install
• Whether you're crawling under a table to make a quick repair or taking Kreg Joinery on the road
• Pocket hole jig system for do-it-yourselfers
• Easy to adjust for materials 1/2-Inch to 1-1/2-Inch

User questions & answers

Question:	how many screws
Answer:	I had bought a medium for my husband and it absolutely fit true to size - not *over*-sized, though, like some Hawaiian shirts, so beware!
Question:	What is the primary difference between the R3, R4, & R5 units and which would be better for an advanced cabinet maker
Answer:	Too small
Question:	Do you have to use their screws with this tool or can you use regular wood screws you buy at any hardware store
Answer:	Try a larger size - where they make these, and Extra Large is for us just Large - so perhaps a bigger size than what he actually wears would fit - maybe a 5X?
Question:	If this is more expensive than the R3 and clamp separately and the clamp is smaller why get this kit
Answer:	I would go XL for you. My husband is 6'4"--all leg, 38 waist and weighs about 240 lbs. and the XL is perfect on him.