11 best goodyear rubber hose

Product description

Sturdy Goodyear 3/8in. dia. EPDM rubber hose is ideal for use with pneumatic tools, stapler guns, lawn sprayers and air compressors. Features a weather-, oil- and heat-resistant outer coating to survive tough conditions. U.S.A. Hose Fitting Size (in. NPT): 1/4, Hose Diameter (in.): 3/8, Hose Length (ft.): 100, Max. PSI: 250, Material Type: EPDM rubber, Hose Application: Air tools, Hose Temp Range (deg F): -40 to 190

• 250 PSI max. operating pressure
• 1070 PSI burst pressure
• Temperature range is -40deg F-190deg F
• Machined brass 1/4in. NPT fittings

User questions & answers

Question:	Can this be used to connect a BBQ grill to natural gas source
Answer:	I've been using one in my garage for years. Works great.
Question:	Is this hose flexible in cold weather
Answer:	The remaining room is as the picture shows. You might be able to get another 15 or 20' depending on the hose diameter.
Question:	Is this epdm rubber
Answer:	Many thanks for your question! Please be noted the difference for these two SKUs is that L815153G is single arm while L820153G is double arms, and the size for L815153G is a little smaller.
Question:	What is the i.d. And o.d. Of this hose
Answer:	My hose does not say Goodyear on it. But the hose it rated at 300psi. The hose is 3/8”id rubber.

Product description

Sturdy Goodyear 1/2in. dia. x 50ft. EPDM rubber hose is ideal for use with pneumatic tools, stapler guns, lawn sprayers and air compressors. Features a weather-, oil- and heat-resistant outer coating. U.S.A. Max. PSI: 250, Hose Diameter (in.): 1/2, Hose Fitting Size (in. NPT): 1/2, Hose Length (ft.): 50, Hose Temp Range (deg F): -40-190, Material Type: EPDM rubber, Hose Application: Air tools

• 250 PSI max. operating pressure
• 1070 PSI burst pressure
• Temperature range is -40deg F-190deg F
• Machined brass 1/2in. NPT fittings

User questions & answers

Question:	Is this hose 1/2 or 3/8 picture shows
Answer:	My truck came with 245 but a went with 275 since i wanted to them wider they will fit might want to check on some forums just to make sure they wont rub but you probably will be good
Question:	Is this hose 3/8 I.d
Answer:	This size with SKU# does not come in white letter sidewall. This is *Black serrated letters.
Question:	It appears that the fittings on the hose are 3/4” and not the 1/2” as stated. Did someone grab the wrong fittings on my hose when they crimped it
Answer:	None of the Manufacturer has in White Letters in your size,what we sell.
Question:	does the end swivel so I can tighten it to a fixed connection
Answer:	This can be a mistake, This tire does not have raised lettering at all. We can not change the descriptions that Amazon posts with our merchandise, they use a "database" of information that has been compiled by their "experts". Sorry for any confusion. For more information visit http://techexperience.net/go/tires/

Product description

Class C weather, oil, and solvent resistant outer coating. Solid brass 1/4" NPT end fittings. Spiral synthetic yarn reinforcement. Max operating pressure: 250 PSI. Max burst pressure: 1070 PSI.

• Class C oil resistant EPDM rubber cover.
• Solid brass 1/4" NPT end fittings.
• Spiral synthetic yarn reinforcement.
• Country Of Origin : United States

User questions & answers

Question:	What country is this made in
Answer:	Not absolutely positive but Goodyear is an American company and should have been made in the United States. But I know that's not always the case. I've always found these hoses to be top quality for my construction business.
Question:	Are both ends male
Answer:	This Goodyear red rubber air hose has 1/4 inch male threads for connection on both ends.
Question:	Is the hose very flexible and easy to roll up
Answer:	No it's not flexible for manual rolling up. Yes if you have a reel but I don't so every time I need to coil it back up it sucks majorly. Is it durable sure but it's not easy to roll it back up! :)
Question:	I am looking for a hose that will withstand being outdoors (exposure to the sun). Does anyone of experience with this hose resistance to UV exposure
Answer:	You're really talking about material choice more than a specific product. Avoid PVC hose, avoid so called hybrid hoses that also have PVC. If your hose is stationary, you can choose one of many ways to shield it from UV/sun. If your hose is in motion outdoors you will probably prefer a polyurethane hose for the lighter weight. You can decrease UV damage rate of rubber hoses by coating them in silicone, which helps to seal them from oxygen to reduce the degradation rate, and if moving them around, reduces the abrasion rate, but may tend to increase surface grime buildup.

Product description

Sturdy Goodyear 3/8in. dia. EPDM rubber hose is ideal for use with pneumatic tools, stapler guns, lawn sprayers and air compressors. Features a weather-, oil- and heat-resistant outer coating to survive tough conditions. U.S.A. Hose Fitting Size (in. NPT): 1/4, Hose Temp Range (deg F): -40-190, Material Type: EPDM rubber, Hose Application: Air tools, Hose Length (ft.): 25, Hose Diameter (in.): 3/8, Max. PSI: 250

• 250 PSI max. operating pressure
• 1070 PSI burst pressure
• Temperature range is -40deg F-190deg F
• Machined brass 1/4in. NPT fittings

User questions & answers

Question:	Where is this hose made....USA or China
Answer:	Yes
Question:	Does this product work
Answer:	the 7424XP Porter Cable we offer has a power cord of 11.5ft. Unfortunately, we do not offer the 25ft power cord on Amazon.Kind regards,AmandaAmazon / Auto GeekCustomer Service
Question:	Is this hose suitable for low pressure propane
Answer:	I have the 7424xp. It is easy to use and works great. I detailed my truck this morning. It is a fool proof system.
Question:	Is this Guaranteed to not crack or brake in Colorado
Answer:	No. The backing plate it comes with is fine. My husband loves this kit.

Product description

Class C weather, oil, and solvent resistant outer coating. Solid brass, 1/4" NPT end fittings. Spiral synthetic yarn reinforcement. Maximum operating pressure: 250 PSI. Maximum burst pressure: 1070 PSI. Temperature range: -40 to 190 degrees F.

• Class C weather, oil, and solvent resistant outer coating.
• Solid brass, 1/4" NPT end fittings.
• Spiral synthetic yarn reinforcement.
• Maximum operating pressure: 250 PSI.
• Made in USA

User questions & answers

Question:	I'm using bottled co2 and nitrogen, regulated of course. i'm concerned with leakage, mostly through fittings
Answer:	No. It's all stainless steel.
Question:	can this be used on porter cable pcf p02003 compressor
Answer:	The two options shows different handle shower head and overhead shower head.
Question:	Is this suitable for scuba applications (grade D
Answer:	35mm cartridge is the correct model. Thank you.
Question:	What’s the difference between the colors of all Goodyear’s hoses
Answer:	Please contact us by "Your Account"->"Your Orders"->"Problem with order" to require. We will solve your problem as soon as possible.

Product description

Class "C" Weather, Oil and Solvent Resistant Outer Coating. Solid Brass 1/4" NPT End Fittings. Spiral Synthetic Yarn Reinforcement. Max Operating Pressure: 250 PSI. Max Burst Pressure: 1070 PSI .

• Class "C" Weather, Oil and Solvent Resistant Outer Coating.
• Solid Brass 1/4" NPT End Fittings.
• Spiral Synthetic Yarn Reinforcement.
• Max Operating Pressure: 250 PSI.
• Max Burst Pressure: 1070 PSI.

User questions & answers

Question:	What is the actual OD of the rubber hose
Answer:	The hose is 3/8" inside diameter with 1/4" NPT fittings.
Question:	Does the hose you received actually say "made in usa" on the hose
Answer:	All air tools and fittings that I have ever used are universal. They are pipe thread fittings most are 1/4" npt and some are 3/8" and 1/2"npt

Product description

This item is no longer manufactured by Michigan Industrial Tools. Solid Brass End Fittings: 1/4-Inch NPT (M) Spiral Synthetic Yarn Reinforcement and Abrasion-Resistant Rubber Outer Jacket Hose Ends are Male / Male 100% Made and Assembled in the USA 10 Year Guarantee

• Solid Brass End Fittings: 1/4-Inch MNPT
• Spiral Synthetic Yarn Reinforcement
• Abrasion-Resistant Rubber Outer Jacket
• 100% Made and Assembled in the USA
• 10 Year Guarantee

User questions & answers

Question:	I thought I ordered 2 of the hose
Answer:	It's easy to check your order after signing in to your account. It would tell you how many you ordered
Question:	Do I order 1/4 or 1/2 inch when says 1/4 intake and fitting looks 1/2? What I am hooking it to that is
Answer:	I bought this to connect my compressor to a 50' goodyear 1/2 reel. My the output on the compressor is 1/4 inch female connector so I bought a 1/4 inch male connector for this hose. I bought the 1/2 by 6' hose so that I can put the reel high up on the wall out of the way. Most tools use 1/4 inch connectors. I has to use a reducer brass fitting to get from 1/2 hose to 1/4 inch connector.
Question:	Do the threaded fittings rotate in relation to the hose
Answer:	On on this particular hose the fittings do not rotate.
Question:	what's the meaning of mnpt
Answer:	Hi Joey, mnpt stands for Male National Pipe Thread Taper (MNPT), sometimes called NPT or MPT. It means the threads are on the outside of the connector. See the second picture. Hope this helped.

Product features

Abrasion-Resistant and Solid

The Goodyear 3' x 3/8" Rubber Whip Hose is flexible, durable and would not crack easily even after multiple uses as it is engineered with a spiral synthetic yarn reinforcement. It can also handle extreme temperatures making it fit to be used during any weather conditions as it has solid brass end fittings.

Product description

From do-it-yourself, to professional, to industrial applications, Goodyear delivers. 100% made and assembled in the USA, the Goodyear Rubber Air Hose is built to perform and backed by an industry-leading 10 year guarantee. Specially-formulated rubber construction meets RMA Class "C" oil resistance and exceeds RMA 4:1 safety factor (burst/working pressure ratio). With a broad -40 F to 190 F working temperature range, it works comfortably and remains flexible in the toughest environments. Protected by the abrasion-resistant outer jacket, the internal spiral synthetic yarn reinforces the hose wall, preventing splitting or bubbling at high pressures and temperatures. Only solid brass end fittings are used to ensure tight, leak-free connections. End caps prevent hose damage when not in use.

Specifications:

• Diameter: 3/8 in.
• Length: 50 ft.
• Fittings: 1/4 in. NPT (M)
• Max. Working Pressure: 250 PSI
• Working Temp. Range: -40 to 190 F

This item is no longer manufactured by Michigan Industrial Tools.

• Solid brass end fittings: 1/4-Inch MNPT
• Spiral synthetic yarn reinforcement
• Abrasion-resistant rubber outer jacket
• 100-percent made and assembled in the USA
• Bend Restrictors Prevent kinks near end Fittings

User questions & answers

Question:	Can this be used for a hooka diving set up
Answer:	You can get them installed at any tire shop that is in your area. You can always google tire shops near you and visit the closest one to have your tires installed.
Question:	What is the o.d. of the 3/8” hose? i plan on purchasing a reusable end connector at the same time i purchase the hose
Answer:	I bought mine months ago it is a 2017 tire.
Question:	what is the inner diameter? 3/8 or
Answer:	These will indeed fit. According to their website and also Tire Rack, approved rim width is 7.5-9.0 inches. The 2014 Mazda6 Touring and GT wheels are 7.5. You do not want to go any wider than 245. Keep in mind that not all 245 width tires are approved for 7.5 inch wide wheels though. It just so happens that this is approved.https://www.goodyear.com/en-US/tires/eagle-rs-a2/sizes-specsAlmost forgot, what I previously mentioned is regarding the fitment of the tire on the stock wheels. With regards to fitting under the wheel well of the car to prevent rubbing, you should also be good. According to the forums, like Mazda6 Club, members have done so with no issues. Good luck!
Question:	Will this fit in the california air tools cat-6310 ultra quiet and oil-free 1.0 hp 6.3-gallon steel tank air compressor
Answer:	If they are your factory wheels yes should fine. I have factory 19 x 8.5 no rubbing.

Product features

Solid Construction

Goodyear’s Rubber Air Hose’s specially formulated rubber construction makes it durable and rough and tough. It is designed to endure harsh conditions and the formulated rubber construction makes it oil resistant and also, the external body doesn’t get damaged with contact to water or dirt. Drag it, drop it and pull it, it made to withstand tough conditions with the abrasion-resistant outer jacket, the internal spiral synthetic yarn reinforces the hose wall, preventing splitting or bubbling at high pressures. With a broad -40 F to 190 F working temperature range, it can endure extreme temperature conditions.

Solid Fittings

The end fittings of the hose are made with solid brass that ensures tight, leak-free connections. End caps prevent hose damage when not in use.

Product description

Sturdy Goodyear 3/8in. Dia. Epdm rubber hose is ideal for use with pneumatic tools, stapler guns, Lawn Sprayers and air compressors. Features a weather-, Oil- and heat-resistant outer coating to survive tough conditions. U. S. A. Material type: EPDM rubber, hose diameter (in. ): 3/8, hose fitting size (in. Npt): 1/4, max. Psi: 250, hose application: Air tools, hose temp Range (deg F): -40-190, hose length (ft. ): 25

• Weather, oil, and solvent resistant outer coating
• Spiral synthetic yarn reinforcement
• Solid brass, 1/4” NPT end fittings
• Made in USA

User questions & answers

Question:	What is the OD of this hose
Answer:	Id
Question:	Does anyone know what size connectors fit this hose. 1/4 " do not
Answer:	Fittings are very good quality. You won't have any issues unless you're dumping the co2 too quickly and cooling your connections.
Question:	Will this hose fit a porter cable c2002 air compressor
Answer:	Can be used on most any compressor. Great hose.
Question:	I just bought this to use with the dewalt 6 gallon pancake compressor. Do I need to purchase anything else to attach this hose to the compressor
Answer:	Good morning. We are not the manufacturer and I don't know for sure if it would work for your application, but I would not use it for your application. This is not an air hose for breathable air. It is for air tool use. I would purchase the correct product for your application. Thank you.

Product description

Say goodbye to stubborn kinked-up hoses. The Fatmax professional grade water hose features advanced technologies to make your work outdoors easier. The PolyFusion technology is combines polyurethane & PVC, making it lightweight & easy to work with, while the antikink technology provides extreme elasticity, to keep kinking at a minimum. This 50'. Heavy duty hose is ideal for commercial use. It's also scratch & abrasion resistant, & will maintain its flexibility in -15° weather, for a lifetime.

• Male & female Swivel grip - easily connects to spigots and attachments. The swivel action ensures that either end can be easily attached and the hose extended without twisting, so sprinklers lie flat and your work is more efficient.
• Technology - combines Polyurethane and PVC, making the hose easy to maneuver around trees, bushes or other obstacles.
• Forged aluminum titanium coated couplings - lead free and crush proof!
• Anti-kink technology - won't kink under pressure and has zero memory.
• Unmatched quality - abrasion resistant outer cover and crush resistant titanium coated forged aluminum fittings, with a 500 psi Burst strength.

User questions & answers

Question:	How high temp rated for hot water
Answer:	I'm sorry I don't know the answer to your question. The only hot water our hose has had is the water the sun heats up.
Question:	Can you drink water out of the hose
Answer:	JoAnn, We generally advise that hoses with the aluminum couplings are safe to drink from after a little water goes through to clean out any bugs or random dirt, and to cool the water and end piece. (This has an aluminum coupling.) If you have any further questions, please reach us by email [email protected] or via Live Chat on our website, M-F 8am-4:30pm PST. Happy watering!
Question:	How does it stand up to cold weather
Answer:	It has done well so far for me, but we have not had a very cold winter this year in the south. However, beware, I ignored the reviews that warned about kinking and should have listened. This hose kinks terribly and I would not buy it again, even if it holds up in cold weather.
Question:	Is this truly a non kink hose
Answer:	It does come pretty close. It twists a lot, which ultimately leads to kinks. It’s not as bad as my past hoses. You just have to fight it a little sometimes.

Product features

Stanley Fatmax Professional Grade Water Hose

The FATMAX Professional Grade Water Hose is the first hose on the market to feature advanced technologies to make your work outdoors easier. The PolyFusion technology combines Polyurethane and PVC, making the hose lightweight and easy to work with, while the AntiKink technology provides extreme elasticity, to keep kinking at a minimum. This hose is scratch and abrasion resistant and will maintain its flexibility in -15 degree weather.

Product description

This Goodyear Oil Hose Reel is crafted of heavy duty industrial steel, heat treated w/ powder coating resisting against corrosion. Reinforced flanged edges, stiffening ribs, stamped steel dual guide arms & pedestal base all light weight & strong, ensuring optimal support. The Premium Commercial SAE.100R1AT Oil Hose is made of Nitrile, Neoprene & single high-tensile steel wire braid, w/a working pressure of 2320PSI/160BAR & 1/2" (12.7m) MNPT connections for large volume delivery.

,br>

Utilizing double adjustment enclosed multi-position release ratchet spring, locking the hose at any desired length. Ball bearing swivel joint inlet connection protecting against leaks, reducing swivel spool & body friction + an Adjustable Hose Stopper & Non-Snag Rollers. Premium SAE.100R1AT Hose is Resistant to: Oils, acids, puncture resistance, abrasion, weather & works in the toughest conditions of -40°F to 212°F (-40°C to 100°C), for the best advantage.

Goodyear Reels are OSHA, RoHS, ISO: 9001, 14001, CNAS, SQC, IAF, MSHA, Listed approved & certified, including cull quality tested. Our Reels are best suited for indoor/outdoor use, night or day, DIY or industrial applications allowing for extension to be up out of the way keeping the home/workplace safe. Includes bolts fitting the 1/2” (12.7mm) holes to mount, (lead-in hose not included). Oil Hose Reels are suitable for Petroleum & Water based hydraulic fluids (NOT AIR).

• SPECIFICATIONS - This Goodyear Oil Hose Reel is crafted of heavy duty industrial steel, heat treated w/ powder coating resisting against corrosion. Reinforced flanged edges, stiffening ribs, stamped steel dual guide arms & pedestal base all light weight & strong, ensuring optimal support. The Premium Commercial SAE.100R1AT Oil Hose is made of Nitrile, Neoprene & single high-tensile steel wire braid, w/a working pressure of 2320PSI/160BAR & 1/2" (12.7m) MNPT connections for large volume delivery.
• EFFICIENT DESIGN & CAPABILITIES - Utilizing double adjustment enclosed multi-position release ratchet spring, locking the hose at any desired length. Ball bearing swivel joint inlet connection protecting against leaks, reducing swivel spool & body friction + an Adjustable Hose Stopper & Non-Snag Rollers. Premium SAE.100R1AT Hose is Resistant to: Oils, acids, puncture resistance, abrasion, weather & works in the toughest conditions of -40°F to 212°F (-40°C to 100°C), for the best advantage.
• SAFETY & PROPER USE - Goodyear Reels are OSHA, RoHS, ISO: 9001, 14001, CNAS, SQC, IAF, MSHA, Listed approved & certified, including cull quality tested. Our Reels are best suited for indoor/outdoor use, night or day, DIY or industrial applications allowing for extension to be up out of the way keeping the home/workplace safe. Includes bolts fitting the 1/2” (12.7mm) holes to mount, (lead-in hose not included). Oil Hose Reels are suitable for Petroleum & Water based hydraulic fluids (NOT AIR).

Product features

Goodyear M820154G Steel Retractable Oil/Similar Fluid 1/2" x 50' SAE-100R1 Hose Reel

Thinking of opening an auto shop or already have one. When supplying equipment for your shop or home you need a brand that can be trusted & has been trusted throughout the ages.

Whether you need Air/Oil/Welding Retractable Reels, Retractable Extension Cord Reels, Oil Pump Meter Guns or 30 gal. Oil Drain Tank, Goodyear has chosen GreatCircleUSA to manufacture its top elite quality equipment.

Trusting Goodyear means trusting GreatCircleUSA to supply you with equipment you need.

Functionality

• Auto-guide rewind system, it will retract smoothly without any kinks.
• Improved ratcheting and double adjustment enclosed spring function locks the hose at any desired length or allows non-locking functioning.

Reinforced & Durable

The reel & 1-3/8" axle Dual Pedestal & Adjustable Guide Arms are:

• Crafted using powder coated heavy gauge steel, providing corrosion resistance.
• Stamped Steel Flanges for reinforced strength, reducing angular pull.
• Strong long lasting SAE-100R1 hose.

Protection & Endurance

This Goodyear Reel is designed with

• 4 direction non- snag rollers aid in reduced abrasion & wear on the hose.
• Including hose inlet connection seals to fight against leakage and keeping the workplace safe.
• The full flow solid shaft & swivel joint ensures smooth, uninterrupted fluid flow.

Easy Mounting

• This reel is designed with a Dual Pedestal Base that has four groove reinforcement ½ inch drilled holes to anchor the reel securely.
• Easy to mounted on walls, ceilings or floors, for the advantage to suit your Goodyear needs.