10 best nail for pneumatic nail gun

• Air Inlet: 1/4 inch NPT Thread
• Operating Pressure: 80-120 PSI
• Driver Diameter: 0.16 inch
• Removable Nails Range: 10-20 gauge

User questions & answers

Question:	How to change o rings
Answer:	Same battery. they are interchangeable, The charger too. same. I have had great luck with the two I own. I wish they made a framing nailer.
Question:	Will it countersink nails in a 2x6 wood deck. Need to prepare boards for sanding. thanx
Answer:	I have used 2".
Question:	Will this tool drive nails through unplaned 3/4" fir siding boards into studs (removing nails completely from the siding boards
Answer:	According to the Senco manual I received with my Cordless F-18 nail gun (manual lists units F-15, F-16A, F-16S, F-18), "Senco warrants that the Senco Cordless tool will be free from defects in materials and workmanship for two years after the purchase date. Senco warrants that the batteries and chargers used with Senco Cordless tools will be free from defects in materials and workmanship for one year after the purchase date"
Question:	Will it pull the nails out of thin pallette wood so that you can re-use that piece of wood? Easily? How does it work
Answer:	Good Morning, Thank you for emailing us about the Senco FramePro 701XP Clipped. This does not have a rafter hook. I hope you havea great day!

Product features

Product Description

Air Locker AP700 is a powerful tool designed to push out nails from a variety of soft and hard woods without affecting the quality. With a lightweight die cast Aluminum body.

AP700 isn't only highly durable but features an ergonomic rubberized grip so you can work for long hours without any fatigue.

The tool comes with a slim elongated nose that easily gets into cramped spaces while hardened hammer delivers a powerful blow to remove the nail. Now you can denail reclaimed wood like a pro. You'll need an air compressor for usage.

APPLICATIONS:

• Remove nails from floorboards, weatherboards, fiber sheets, skids, pallets, boards, barn lumber, sheathing and wooden decks.
• Works with different types of soft and hard woods including Pine, Poplar, Chestnut, Sycamore, Oak, Locust, Hickory, Osage orange, White Oak and Maple.

Rubberized comfort grip for fatigueless use

Often you need to work long hours when you have large project. AP700 comes with a rubberized ergonomic grip that doesn’t only feel great in your hand but keeps you going preventing fatigue and soreness.

Denail boards/pallets without any damage

Why spend hours removing nails manually when you can denail wood in a matter of minutes? This amazing nail puncher brings you exceptional portability that you'll appreciate. Removes or sinks nails between 10-20 gauge sizes.

Lightweight durable die cast Aluminum body

Quiet and precise operation saves effort and time. The die cast aluminum body makes the device durable but the overall unit still weighs just under 2 lbs. and feels great in your hands. Ideal for recycling wood while maintaining its quality.

Push variety of nails out of hard woods

The nail puncher provides enough power to push nails out of thick pallets. You can also use AP700 to sink nails into a variety of soft and hard woods including Pine, Poplar, Chestnut, Sycamore, Oak, Locust, Hickory, White Oak and Maple.

Rubberized Ring Prevents Slidage

The nail puncher has a rubberized ring around the rear end of the unit to prevent sliding when you are not using it.

Directional Exhaust adds Convenience

The rear end also features a directional exhaust which you can rotate 360 degrees to direct exhaust away from your face or work area.

Product description

The Freeman PMPN Pneumatic Mini Palm Nailer with Magnetic Tip is a small yet powerful air hammer to assist you in your hammering needs. There is no need to swing a hammer in tight spaces or hard to reach areas. This palm nailer is compatible with 6D-16D nails fron 2" to 3-1/2". A magnetic tip allows you to place the nail in the tip of the gun, place it where you want to drive the nail and apply light pressure, letting the nailer do the work for you. Other convenient features of this nail gun include a comfortable rubber grip design, an ergonomically engineered body great for extended use, and an internal air filter and anti-dust cap to keep debris out of the tool. The Pneumatic Mini Palm Nailer with Magnetic Tip is a lightweight, durable and easy to use tool to assist in your building needs.

• Nailed It: The Freeman PMPN Pneumatic Mini Palm Nailer with Magnetic Tip is a small but powerful hammer to assist you when working in tight spaces and hard to reach areas. It's lightweight with an ergonomically designed body and can handle nails from 6D to 16D, and up to 3-1/2".
• Pro Design: This powerful and durable palm nailer features high quality internal parts and a lightweight, ergonomic design weighing in at under two pounds. It comes with everything you need to hammer in hard to reach places, with air tool oil and adjustment tools included.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	Does it come with a sample supply of nails
Answer:	No Unfortunately does not come with a sample box of nails.
Question:	I see it's magnetic for holding nails but will this work with 1 1/4 inch aluminum nails (not magnetic) to install trim
Answer:	Yes you can, but the magnet wont hold the nail. You will have to hold the nail by hand or with pliers (1 1/4 is a little short) until you get it started and then you can remove your hand/pliers and finish driving it with the nailer. The nailer activates by holding pressure down on the nail top with the nailer.
Question:	Can this be used with 1-1/2" nails? Amazon says "up to 3-1/2 inch nails" but Freeman website says
Answer:	I think it should be ok for 1 1/2", but it's difficult for 4".
Question:	Dies it hold up pretty well? How about if pressure briefly gets high? - (accidentally ruined
Answer:	I'm not sure about the pressure problem. I only use mine for hanger nails or toe nails in tight spots. Sounds like you need a new pressure regulator more than a new tool.

Product description

The Freeman P5FRFNFWSCB Pneumatic Framing and Finishing Nailers and Staplers Combo Kit with Canvas Bag and Fasteners (5-Piece) is an essential collection of nail guns for construction contractors and DIYers. This assortment of air powered tools contains a 21 Degree 3-1/2" Full Round Head Framing Nailer (PFR2190), 16-Gauge 2-1/2" Straight Finish Nailer (PFN64), 18-Gauge 2" Brad Nailer (PBR50), 18-Gauge 1-5/8" Narrow Crown Stapler (PST9040), and 20-Gauge Fine Wire Stapler (PFWS). The framing nailer is designed for framing, sheathing, truss assembly, roof decking and subfloors. This durable nail gun features a one piece drive blade made of hardened steel. Put the finish nailer to work on door and window casing, moulding, trim, chair rails and cabinetry. A quick jam release increases productivity. The brad nailer is great for finish and trim, furniture and picture frame assembly. Easy to use for long stretches of time, this tool has an ergonomic design. The narrow crown stapler is perfect for decorative trim, cabinet backing, and hobbies and crafts. A no mar tip ensures professional results. The fine wire stapler is great for insulation, upholstery, screen work, and hobbies and crafts. A comfort grip handle reduces fatigue while increasing control. The pneumatic framing and finishing nailers and staplers Combo kit with canvas bag and fasteners (5-Piece) includes a canvas storage bag and fasteners for each tool so you can get right to work.

• Nailed It: This 5-piece framing and finish nail gun kit includes a 21 degree full round head framing nailer, 16-gauge straight finish nailer, 18-gauge brad nailer, 18-gauge narrow crown stapler, and fine wire stapler – plus a canvas bag and fasteners for each tool.
• Pro Design: This kit is the ultimate solution for both professional contractors and DIY builders, covering all your framing and finishing needs – including three nailers, two staplers and a range of accessories, all packed into a durable canvas carrying bag.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	What are the air requirements
Answer:	just nails
Question:	Do you have to use Freeman nails and Staples what can you use any brand that's the same size
Answer:	Includes... NT50AE2 Nailer Safety Glasses Air Fitting Carry Case No-Mar Tip
Question:	Are these rechargeable
Answer:	The size for the fitting is 1/4" Male NPT (National Pipe Thread). The fitting can be removed and replaced as needed. (remember teflon tape).
Question:	Can the framing gun take 3 1/2 inch nails
Answer:	Good morning, FedEx shipping prices are calculated by items, box size, shipping address and type of shipping chosen. Have a wonderful day.
Question:	can you also use round head nails? I have a combination of clipped and round left over from previous jobs
Answer:	The NT1850DE 18-Gauge Cordless Brad Nailer allows the user to move easily around the jobsite without hoses or compressors! Equipped with Brushless motor technology and powered by a Compact 3.0Ah Lithium Ion battery, it is capable of driving up to 1,650 nails per charge. It employs a unique air spring drive system (similar to Hitachi's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving-even at an angle, and easy maintenance if the need should arise due to fewer parts to manage. It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light. This 18-Gauge cordless nailer drives nails from 5/8" to 2" in length and can be used for a variety of applications including molding installation, cabinet and picture frame assembly, wainscoting, chair rail, window and door casing and decorative trim. For more specific details you will need to contact Hitachi directly. Have a great day.
Question:	Does the porter cable model FC350B (new) come with a case or not
Answer:	No
Question:	I c a rubber bump at the end does it stay on or off
Answer:	I think you are asking about FREE ECONOMY SHIPPING: We do not get the benefit from you subscribing to Amazon Prime. We are 3rd party suppliers to Amazon. Generally Amazon calculates the slowest method for shipping from 3rd party suppliers. Certainly if you are within 500 miles of our location (New England,) it probably is 1 day delivery. If you are asking a different question, then get back to me.
Question:	Will a porter cable cmb15 150psi compressor operate the fc350b nail gun
Answer:	Everything is plastic except mounting bolts. Brass inserts for plastic tightening nuts.

Product description

The Freeman PFR2190 pneumatic 21 degree 3-1/2" Full Round Head framing Nailer with case is ideal for projects such as framing, subfloors, roof decking, pallet and shipping crate assembly, and fencing. This versatile air powered tool is compatible with 10-12 gauge plastic collated 21 degree full Round Head framing nails from 2" To 3-1/2", and a dual mode trigger allows the option of either bump or sequential firing. This nail gun features a 360 degree adjustable exhaust to keep air out of your face, an anti-dry-fire design to extend the life of the tool, an anodized aluminum magazine and cylinder for increased durability, and a tool-free depth adjust for various applications. The body of this framing Nailer is constructed of magnesium to reduce weight, making it easier to use for long stretches of time. The removable no mar tip prevents damage to your working surface. A blow molded carrying case is included, along with safety Goggles, air tool oil, and adjustment tools. The pneumatic 21 degree 3-1/2" Full Round Head framing Nailer with case will increase productivity For Dyers at home as well as professional contractors at the job site.

• Nailed it: This 21 degree Pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional contractors and home DIY projects.
• Versatile and powerful: the framing nailer features tool-free finger depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, wall sheathing, siding installation, subfloors, pallet building, wood box assembly, and fencing.
• The right tool for the job: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.Operating Pressure: 70 – 115 PSI
• Tough and dependable: we make an array of durable construction Tools and Accessories, including staplers and nailers For siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, BOSTITCH, Senco, Paslode, and DEWALT.

User questions & answers

Question:	The listing states nail length, not diameter. IS the rack designed for .148" nails
Answer:	No, the range of nail diameter is .113-.131.
Question:	Does the Freeman 2190 have a spike tip for better toenailing
Answer:	Yes it does have the spike tip. The rubber protector just pops off when you remove the compression clamp.. I've used this gun for 5 months or so and am really happy with its performance so far..
Question:	Does nailer alone really weigh 14.5 lbs
Answer:	Hi Craig . . . the nailer weighs less than 10 lbs, the 14.5 must be the gross weight of the nailer within its' somewhat rugged plastic case. . . I can't say enough about the nailer, it's my 2nd Freeman product. . . they offer a great value!
Question:	will this work with a 6 gal pancake compressor with a cfm of 2.6, used lightly to build a shed
Answer:	The air compressor must be able to maintain a minimum of 70 psi during operation, with an operating range of 70-115 psi, not to exceed 120 psi.

Product features

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

The Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer is specifically designed for working on cedar shingles, roof and wall sheathing, siding, and fencing, and is compatible with 15 degree 13-14 gauge plastic or wire collated siding nails from 1-1/4" to 2-1/2". The nails load from the side fast and easy for efficiency. The body of the oil-free nail gun is made of lightweight and rugged die cast magnesium, creating a low maintenance tool great for use over extended periods of time. A one piece hardened steel drive blade and an anodized aluminum cylinder add to the durability. The siding nailer's bump fire trigger drives nails with precision and features a safety lock to prevent accidental firing. The convenient tool-free finger depth adjust provides fast and easy control of the depth of the nails, while the comfort grip handle helps reduce fatigue and increases accuracy. A no mar safety tip prevents damaging your working surfaces. This air powered nail gun also contains a 360 degree adjustable exhaust to direct air away from your face, and an air filter / anti-dust cap to keep internal components free from dust and debris. A belt hook, safety goggles, air connector, air tool oil, and adjustment tools are included. The Pneumatic 15 Degree 2-1/2" Coil Siding Nailer will allow you to tackle DIY projects as well as professional jobs. Operating Pressure - 70 – 110 psi. Fastener Diameter: 0.09" – 0.113"

• Nailed It: This pneumatic coil siding fencing nailer features a lightweight and durable magnesium body, ergonomic grip handle, no mar tip, and transparent side load magazine that holds up to 400 wire or plastic coated siding nails for hard-working efficiency.
• Many Applications: This nailer is ideal for cement siding, sheathing, fencing, fiber concrete siding, decking installation, plywood, and OSB. It features depth adjustment, allowing you to customize the firing depth for many different types of projects.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	What does this nail gun weigh, unloaded
Answer:	These can cut and strip Romex / NM-B
Question:	Does this shoot .090 nails
Answer:	yes they are
Question:	does anyone know how well does it shoot 11/4 nails into cedar shakes
Answer:	it works
Question:	Will this nailer feed and shoot 1 7/8 aluminum screw shank, plastic collated, Duo-Fast nails
Answer:	Yes, as long as the AWG is between 20 and 30. Most communication wire is AWG 24, 26, so it would work. But, it is up to you to know the AWG of the wire you are using. If you use a hole that is too small in the stripper, you could nick the conductor and that would not be good. It's critical the proper AWG hole is used for the AWG wire.

Product features

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

15 Degree Wire or Plastic Collated Siding Nails

The PCN65 is the ideal tool any project using 15 degree coil siding nails, including the installation of cement siding, sheathing, fencing, fiber concrete siding, decking, plywood, and OSB. The magazine has a multi-position tray that adjusts to hold plastic collated nails from 1-1/4” to 2-1/2” and wire collated nails from 1-3/4” to 2-1/2”, and the nose of the nailer has a magnet to keep the coil of nails in the correct position for firing. Using coil nails means you have more nails to work with before you need to reload, and a quick look through the transparent bucket makes it easy to check if your fasteners are running low. Whatever type of coil nails you need, we have them here for you!

Product description

The NR83A5 Full Round Head framing nailer with depth adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and Mobile home and modular home construction. The NR83A5 is like the original NR83A that you have Come To trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A.The NR83A5 relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power.Operating Pressure : 70-120psi

• Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT
• Cylinder valve drive system for rapid response and increased durability
• Selective actuation on trigger allows for either sequential or contact nailing
• Rafter hook is included for convenience on the jobsite
• Tool-less depth of drive adjustment for improved control and flexibility when fastening into various types of wood
• Equipped with an industrial 2-piece magazine that can withstand jobsite abuse
• Accepts two strips of nails at a time and locking feeder system makes replenishments quick and easy
• Open nose design for easy extraction of a jammed nail

User questions & answers

Question:	Is this unit easy to use
Answer:	Yes
Question:	this is a pneumatic nailer that is corded. the picture shows a air connection to put air to it. is the information you show as corded incorrect
Answer:	You may have mistaken the air hose for an electrical cord. In 40 years in this line of work, I've never seen both air hose and a power cord connected to any pneumatic tool.
Question:	Can. You shoot clipped head nail in it
Answer:	Hi there. This nailer only accepts full round head nails. Hope this helps!
Question:	Where is it made
Answer:	At Hitachi Factory

Product features

Depth Adjustment

Included for convenience on the jobsite

Selective Actuation

On the trigger allows for either sequential or contact nailing

Ergonomic Non-slip Rubber Grip

On the handle helps maintain a secure hold and comfort during use

Lightweight and Well-balanced

For easy maneuverability

Product description

The NR90AES1 framing nailer drives plastic collated nails from 2" up to 3-1/2" in length and features Metabo HPT's next generation "industrial design."



Weighing only 7. 5 lbs, this framing nailer is easy to use all day, while still providing the power similar to other bulkier and heavier framing nailers.



The NR90AES1 framing nailer is great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.



The redesigned head guard of the NR90AES1 framing nailer allows for a faster and easier disassembly process, saving valuable time during tool main10ance.

• NAILER: 21 degree plastic collated framing nailer
• APPLICATIONS: Great for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction
• LIGHTWEIGHT: At only 7. 5 lbs and well-balanced allowing for ease of maneuverability and less user fatigue
• SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch
• TOOL-LESS DEPTH ADJUSTMENT: Depth adjustment to countersink or flush drive into a variety of materials
• FASTENERS: Accepts 2-in up to 3-1/2-in plastic collated framing nails
• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine

User questions & answers

Question:	Aside from the name, is there any difference between this and the hitachi nr90aes
Answer:	Good morning, No difference at all. Same exact tool other than the name. Have a wonderful day :)
Question:	Can u use this gun to use on concrete wall faring strips
Answer:	This gun shoots a plastic collated nail with the angle of the nails at 21 degrees. It shoots up to a 3 1/2” nail. It will shoot nails into wood but not concrete. Hope this helps!
Question:	Can the air inlet fitting be changed to a different size? my compressor (craftsman cmec6150) has 1/4" npt. nailer has 3/8" inlet
Answer:	Absolutely, it will allow more air flow with less pressure.
Question:	Does this nailer take 22 degrees nails
Answer:	The variance on the 20-22 Degree Nailers is 19.5 to 22 Degrees. There is no separate difference between any of these tools that are designed for 20 Degree Plastic Collated FRH Nails. Anybody who makes a statement otherwise does not know what they are talking about, or has bought some bad nails in the past and it got blamed on the 1 Degree difference. First off, unlike Senco, Bostitch and Paslode, who manufacture most of their Nails or govern the quality of the spec, most manufacturers of pneumatics do not manufacture their own nails, they source to the lowest bidder, which means you can get some real junk. You get what you pay for. Most of the North American produced product is of good quality.

Product description

Remember when you could build whatever you wanted? Nail nails and fasten fasteners with the WEN 18-Gauge 2-Inch Pneumatic Brad Nailer. Fire 18-gauge brads anywhere from 3/8 to 2 inches in length. Our spring loaded magazine makes for quick and easy reloads with enough space to hold up to 106 nails. The lightweight body combined with the rubber-lined handle limit fatigue during long days on the job. Operating pressure ranges rom 60 to 115 PSI with the nailer consuming 0.028 CFM of air per nail at 88 PSI. The 1/4-inch NPT air inlet allows for quick connection to your favorite air compressor. Adjust the firing depth of the nailer with the simple turn of the depth adjustment wheel. Check the amount of remaining nails through the gauge window mounted on the side of the magazine. Unlatch the front nose to clear jams quickly and easily. Adjustable air exhaust lets users direct the pneumatic air output in any direction while the powder-coated finish prevents wear and tear to the nailer’s body. This package also includes lubricating oil, hex keys, 500 3/8-inch nails, 500 3/4-inch nails, 500 1-inch nails, and 500 2-inch nails. And, because its a WEN product, your nailer comes backed by a two-year warranty and a friendly customer help line all to make sure you remember WEN.

• Shoot 18-gauge brads ranging from 3/8 to 2 inches in length
• Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting
• Features a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine
• Hassle-free nose latch makes clearing jammed nails quick and easy
• Includes 500 18-gauge 3/8-inch nails, 500 18-gauge 3/4-inch nails, 500 18-gauge 1-inch nails, and 500 18-gauge 2-inch nails

User questions & answers

Question:	Can I use this to put on a board & batten wall? 3” strips, 1/2” thick
Answer:	Yes. It comes with various nail sizes to fit that job.
Question:	Does the one that comes with 500 nails include a case
Answer:	A case does NOT come with the WEN 61721 (with 500 nails option).
Question:	Es electrica o de compresora
Answer:	Con comprensión
Question:	Does this have a metal magazine? I have Hitachi that broke twice from light use due to magazine being plastic
Answer:	Yes the magazine is metal. This is a great tool

Product features

Hassle-free Nose Latch

The nose latch makes cleaning jammed nails quick and easy.

Adjustable Exhaust Port

Adjust the air exhaust to direct the pneumatic air output in any direction.

Depth Adjustment Wheel

Adjust firing depth of the nailer with a simple turn of the depth adjustment wheel.

Spring Loaded Magazine

The spring loaded magazine makes for quick and easy reloads and holds up to 106 nails.

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

The Freeman P4FNCB Pneumatic Finishing Stapler and Nailer 4-Piece Combo Kit with Canvas Bag and Fasteners is an incredible collection of tools for DIY home improvement and repair projects as well as professional contractor jobs. This kit covers all your finishing needs with four durable and rugged air powered tools that complete a wide span of applications. The 16-Gauge 2-1/2" Straight Finish Nailer (PFN64) is perfect for molding, chair rails, door casing, as well as cabinetry and furniture construction. Use the 18-Gauge 1-5/8" Narrow Crown Stapler with Quick Jam Release (PST9040Q) ideal for handling decorative trim, cabinet backing, and hobbies and crafts. The 18-Gauge 2" Brad Nailer with Quick Jam Release (PBR50Q) is ideal for interior and exterior finish and trim, furniture, cabinetry, and picture frame assembly. Top it off with the 23-Gauge 1" Micro Pinner (PP123), specifically designed for applications such as tacking decorative trim, glazing strips, jewelry cases, small picture frames, and cabinetry trim. Lubrication oil, adjustment wrenches, safety goggles, belt hooks, and 200 fasteners for each tool are included, along with a convenient canvas carry bag. The Pneumatic Finishing Stapler and Nailer 4-Piece Combo Kit with Canvas Bag and Fasteners will allow you to get right to work on finish jobs.

• Nailed It: The Freeman P4FNCB Pneumatic Finishing Stapler and Nailer 4-Piece Combo Kit with Canvas Bag and Fasteners comes with a 16-Gauge 2-1/2" Straight Finish Nailer, 18-Gauge 1-5/8" Narrow Crown Stapler, 18-Gauge 2" Brad Nailer, and 23-Gauge Micro Pin Nailer. This kit has everything you need for all your finishing needs.
• Pro Design: This kit comes with a canvas carrying bag that includes a starter pack with 200 fasteners for each gun, plus oil, wrenches, belt hooks, and safety glasses. It's got everything you need for finish work, from window casing to decorative trim.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	What brand brads and nails that are compatable
Answer:	It depends on the type of wheels. The ones I used pressed on the the end of the shaft so I was able to attach them after the gearbox was mounted.
Question:	Are the guns air hose "ready" or will I need fittings
Answer:	In theory, you could run the gearbox backwards to drive the small DC motors as a generator. I wouldn't expect to get a large amount of energy from the machine, or expect the machine to handle long term operation, but it could be used as a simple illustrative device.
Question:	Can you use any other nails with these? I have some nails I just ordered & really done want them to go to waste
Answer:	Yes, 5 round and 1 hex axle (3 7/8 inch long)
Question:	is the product american made
Answer:	with what I consider to be its minimum, base configuration, I'm getting 100mm wide, and 170mm long.this is working with the universal base plate kit and the duel motor drive. the unit can be shrunk or expanded as need be though.