14 best armstrong torque wrench

Product description

Made in the USA - quality and availability. Innovative linear ball bearing design mechanism for improved performance; 1) eliminates friction between spring and case for greater accuracy, 2) eliminates speed sensitivity errors, and 3) produces a. Twist detent locking ring allows easy setting of desired pre-set torque and prevents accidental Change of the torque setting while in use..

• Made in the USA - quality and availability
• Innovative linear ball bearing design mechanism for improved performance; 1) eliminates friction between spring and case for greater accuracy, 2) eliminates speed sensitivity errors, and 3) produces a
• Twist detent locking ring allows easy setting of desired pre-set torque and prevents accidental change of the torque setting while in use

Product description

64-720 Model Code: AA (part# 64-720) This item features: -Can be used on left and right-handed nuts and bolts. -Handle is pivoted to beam yoke for precise measurements. -Easy to read satin finish scale. -Dual scale. -Designed especially for use in mines. -Heavy, fabricated wire guard is mounted to case in addition to standard dial guard. -Fits all 1/2'' and 3/4'' drive dial torque wrenches, and is furnished standard on 64-452. -Price is for 1 Each. Testing and approvals: -FED SPEC. GGG-W-686c. -ANSI Spec. B107.14M. -ANSI B107.14M, ISO 6789. -Meets Federal Spec. GGG-W-686C. Len. = Overall Length Len. = Overall Length Model Code  Model Description AADrive Size:1/4 in, Drive Type:Male Square, Torque:60.00 in lb [Max], Torque Increment:2.500 in lb, Overall Length:11 in, Head Type:Round, Locking Type:Ball, Torque Setting:Beam, Material:Cold Formed Steel, Measuring System:Inch, Type:Torque Handle, Wt.:1/2 lb ABDrive Size:3/8 in, Drive Type:Male Square, Torque:600.00 in lb [Max], Torque Increment:25.000 in lb, Overall Length:15 in, Head Type:Round, Locking Type:Ball, Torque Setting:Beam, Material:Cold Formed Steel, Measuring System:Inch, Type:Torque Handle, Wt.:0.80 lb ACTorque:0.00 ft lb [Min], 150.00 ft lb [Max], Overall Length:18.300 in, Type:Deflecting Torque Wrench, Wt.:1 1/2 lb

• All of our products are Heavy Duty
• All of our products are for professional tool users
• All of our Products are new and in the box.
• We love all of our customers!

Product description

Assembled in the USA of us and global components - quality and availability. Memory indicator pointer remains at maximum torque for positive Verification – valuable to determine breakaway torque. Oversize dial permits easier reading.

• Assembled in the USA of US and global components - quality and availability
• Memory indicator pointer remains at maximum torque for positive verification – valuable to determine breakaway torque
• Oversize dial permits easier reading

Product description

It's not just STRONG. It's ARMSTRONG. That's the credo we live by for Armstrong Industrial Tools. The demanding industrial and commercial environments of today call for the highest quality, durable, and strongest tools we can provide. Armstrong got it's start in 1890 and created it's first line of drop forged wrenches in 1909. For over a century we have prided ourselves of manufacturing only the highest quality, Made in the USA, hand tools for the industrial end user. Whether working on transmission lines or repairing boilers, or building main reduction gears, Armstrong tools have the innovation and strength to get the task done safely and quickly. They are designed and manufactured for professional tool users and continue to be manufactured with uncompromising quality.

• Changes A 3/8" Square Drive Torque Wrench (Or Ratchet) Into A 12-Pt. Box End Wrench Configuration
• The Box End Wall Thickness is Specially Designed to Provide Strength While Still Allowing Ample Room for Access to Reach Restricted Fasteners.
• Measure Exactly 2 Inches From Center of Adapter Opening (Fastener) to the Center of Square Drive for Easy Torque Calculations
• {Desired Torque to Fastener Length of Torque Wrench} / {Length of Torque Wrench Adapter Center to Center Distance (2")}
• This Calculation Assumes That the Attachment is Aligned with Torque Wrench Handle When Torqueing Fastener

Product description

It's not just STRONG. It's ARMSTRONG. That's the credo we live by for Armstrong Industrial Tools. The demanding industrial and commercial environments of today call for the highest quality, durable, and strongest tools we can provide. Armstrong got it's start in 1890 and created it's first line of drop forged wrenches in 1909. For over a century we have prided ourselves of manufacturing only the highest quality, Made in the USA, hand tools for the industrial end user. Whether working on transmission lines or repairing boilers, or building main reduction gears, Armstrong tools have the innovation and strength to get the task done safely and quickly. They are designed and manufactured for professional tool users and continue to be manufactured with uncompromising quality.

• Changes A 3/8" Square Drive Torque Wrench (Or Ratchet) Into A Spline Box End Wrench Configuration
• The Box End Wall Thickness is Specially Designed to Provide Strength While Still Allowing Ample Room for Access to Reach Restricted Fasteners.
• Measure Exactly 2 Inches From Center of Adapter Opening (Fastener) to the Center of Square Drive for Easy Torque Calculations
• {Desired Torque to Fastener Length of Torque Wrench} / {Length of Torque Wrench Adapter Center to Center Distance (2")}
• This Calculation Assumes That the Attachment is Aligned with Torque Wrench Handle When Torqueing Fastener

Product description

Armstrong micrometer torque wrench, model CG275FDC-ARBH. This torque wrench is equipped with 3/8" drive and is rated for 5 to 75 ft.-lbs. It includes a certificate of calibration (dated 4/25/2014) confirming its accuracy of +/- 3% CW and also a durable plastic storage case. Torque is limited via with a reduced friction release mechanism Operates and ratchets in both right and left hand positions Lock ring prevents accidental change of torque setting Durable aluminum easy-grip diamond knurled handle Only ten degrees handle travel required for ratchet action May be used continually at maximum torque Wrench is made of highest quality heat treated steel Finished with tough, durable chromium nickel plating Mechanism protected from routine contamination

• Operates and ratchets in both right and left hand positions
• Only ten degrees handle travel required for ratchet action

• 3/8 in. Drive dual-direction torque wrench delivers 20 to 100ft.lb. of torque for daily long-term industrial use. The wrench head is made of hardened Chrome-Moly alloy, Stronger than CR-V. Excellent material extends the life of wrench. Meets ANSI standards and specifications.
• Laser engraving dual-range scale improves numeral clarity, even in low light. Reversible 72-tooth ratchet head drives in both directions and measures torque in clockwise direction, suitable for restricted spaces.
• Clicking sound in the handle alerts user when torque value is reached, preventing over-applying torque. Each tool is shipped pre-calibrated and tested for accuracy to industry standards (within +/- 4% High Accuracy).
• Spring loaded adjustment collar automatically locks in place at the desired torque setting, ensuring it will not accidentally slip when being used. Knurled handles are made of aluminum that are beautifully durable, maintaining firm grip, preventing slipping. Smooth and precise operation. Calibration certificate with individual serial number included.
• Wrench delivers a high level of accuracy and can help prevent overtorquing in equipment, vehicle maintenance and industrial uses. Includes Hex: H5, H6, H7, H8, H10; Torx: T40, T45, T50; Socket bits: 10mm, 14mm, 17mm. Please read the instruction carefully to avoid any damage.

User questions & answers

Question:	What country is this wrench made
Answer:	I use this for my beadlock wheels on my SxS. It is not marked with "Made in ?" Shipped from NC, USA. Seems accurate and durable.
Question:	How do you self-calibrate this torque wrench at home
Answer:	Dear Customer,　 1. Pre-setting the torque value　 a. Pull back the locking ring to unlock the Supplementary Graduation b. Turn the Supplementary Graduation to set a torque value. Example: To set torque value at 66lb.ft. Step 1: Turn Supplementary Graduation until 60lb.ft on Main Graduation close to Graduation Datum Line. Now, the torque is set at 60lb.ft. Step 2: Turn clockwise until 6 on the Supplementary Graduation is aligned with Center Line. Now Torque is set at 66lb.ft Any more issues, please feel free to contact us. Best Wishes, GEARDRIVE
Question:	How long is the handle in the 1/4 drive wrench
Answer:	Dear Customer, 1/4 torque wrench handle length is 3-1/8". Any more issues, please feel free to contact us. Best Wishes, GEARDRIVE

Product features

72-Tooth & Dual-Direction Click

• 72-Tooth ratchet head

More accurate. The calibration range is 4%, the 1/4-in. With professional calibration.

• Dual-Direction Click

Torque wrench can be used both clockwise and counterclockwise. Clicking sound in the handle alerts user when torque value is reached, preventing over-applying torque.

Quick Release Button & CR-MO High Quality Material

• Quick Release Button

The head of the wrench is equipped with a quick release button, quick fall-off structure,easy single hand operation.

• CR-MO High Quality Material

Excellent CR-MO material hardness is higher, make ratchet head more durable, extend the service life.

Dual-range Scale & Non-slip Handle

• Dual-range Scale

With dual-range (ft.lb/Nm) scale setting, it reaches a high contrast, easy to read even in low light conditions.

• Non-slip Handle

Non-slip knurled aluminum handle allows for a better grip while working.

• PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
• DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
• LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
• PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
• COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.

User questions & answers

Question:	how long is this wrench
Answer:	2.5 x 3 x 16 inches
Question:	How would this be set if I require 76ft-lbs torque
Answer:	Hello, Please turn knurled handle until its top edge is even with the horizontal “70” mark on main scale and the “0” mark on micrometer scale is centered on vertical line of main scale. The micrometer-scale divides the main scale markings into 10 divisions. Every micrometer-scale marking equals 1 ft.-lb. To increase torque from 70 to 76, turn the micrometer handle clockwise until the "6" mark is centered on the vertical line of the main scale. Regards,
Question:	many low torque wrench has little sound at low torque, does this one make click sound at 50inlbs below
Answer:	The click is audible, but only just. My first bolt I torque with this, I was expecting a "THUNK" like the ft-lb cousin, but considering the torque we're working with is extremely low, the less than audible "THUNK" should be expected. When using this one, go slow, and rely more on the feel than the sound, as you'll get a "THUNK" you can feel in your hands when you get to the required spec.
Question:	Where is torque wrench made
Answer:	Hello, The LX-184 Developed, Designed and Warranted by LEXIVON USA - Manufactured and Certified in Taiwan under our strict quality standards & supervision. Regards.

Product description

Stanley J6012C Proto 3/8-inch Drive Ratcheting Head Micrometer Torque Wrench 20-100 ft-lbs Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance.

• Calibrated to +/- 4% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale.
• Calibration is accomplished by manual loading the torque wrenches
• Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance
• Made in USA

User questions & answers

Question:	How long is this torque wrench
Answer:	17".
Question:	Does it come with a calibration certificate
Answer:	yes
Question:	Does it come with the storage case
Answer:	Yes
Question:	Is this wrench click style? and does it measue in foot pound or inch pound
Answer:	Very nice torque. it is a click style and measures foot pounds. I've been in the auto industry for many years and the quality is just as good as a MAC or MATCO wrench but without the heavy price tag.

Product description

This Diamond Series torque wrench by Capri Tools features a diamond contour grip design that combines an ergonomic sure-grip and a lightweight impact resistant construction. The diamond contour grip is designed for a comfortable and steady hold. The handle is made of premium impact resistant materials which is 30% lighter than traditional torque wrench handles. Our spring loaded pull down ring and specially engineered ultra smooth torque dialing help you switch torque settings on the fly: simply pull down the ring, turn the handle, and release the ring. The positive lock mechanism secures the torque setting in place while you work. The quick release button helps you easily switch between bits and sockets. The engraved Foot-Pound and Newton Meter dual scale provides a vivid and clear reading of the torque setting. Torque setting is available anywhere between 80-365 ft-lbs. or 119-485 Newton Meters, with torque tolerance at +/- 4%. Each one of our torque wrenches comes with a NIST traceable certificate of calibration, calibrated in accordance with ASME B107.300-2010 and ISO 6789:2003 standards. Comes with custom fitted high-impact case for storage.

• Torque with confidence with our diamond sure-grip, made of lightweight impact resistant materials and constructed for a steady ergonomic hold
• Ultra smooth torque dialing, quick torque change with spring loaded pull down ring, secure torque setting with positive lock mechanism
• Calibrated in accordance with ASME B107.300-2010 and ISO 6789:2003, calibration certificate included
• Dual torque range: 80-365 ft-lbs and 119-485 Nm, tolerance +/- 4%
• Custom fitted high-impact storage case included

User questions & answers

Question:	Does the capri 31100 torque wrench have nm from 3.7 to 27.4 stated in specifications or 2.8 to 16.4 nm in discription which is correct? Thanks
Answer:	3.7-27.4
Question:	How many teeth
Answer:	Hi Matthew, It has 24 teeth. Thank you for your question, I hope this was information was helpful.
Question:	Where is this made from
Answer:	The 31103 Torque Wrench is made in Taiwan.
Question:	Can this torque and click on a reverse thread
Answer:	This tool work great in forward thread. It clicks at setup limit. It's very accurate most especially for camshaft cap bolt where accuracy is tantamount for precision. Most especially the cylinder head is aluminum. Very to strip. I never tried it on reverse thread and I am not willing to use it on reverse since I don't have many application in reverse thread except for bmw vanos.

Product features

Ultra Smooth Torque Dialing

Quick torque change with spring loaded pull down ring, secure torque setting with positive lock mechanism.

Diamond Sure-Grip

Torque with confidence with our diamond sure-grip, made of lightweight impact resistant materials and constructed for a steady ergonomic hold.

Storage Case Included

Custom fitted high-impact storage case included.

Product description

Stanley J6062C Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 40-200 in-lbs Calibrated to +/- 3% clockwise direction (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance.

• Calibrated to +/- 3% clockwise direction (for J6060A, calibrated to +/- 4% clockwise direction)
• Calibration is accomplished by manually loading the torque wrench
• Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance
• Made in USA

User questions & answers

Question:	What is the NSN for this tool
Answer:	I don't know what NSN stands for, sorry.
Question:	where is this manufactured
Answer:	I looked closely and could not find any markings. It is only marked "USA Professional" with an engraved serial number. I can tell you this is a fine tool. It is chrome plated (no greenish tint as pictured) and comes with a certificate of calibration, dated and initialed by a technician. I also checked the instructions included with the wrench and could not find any origin for the maker. It is made for the Stanley Corporation and they have locations in the US, but not sure about the maker origin. I am sure you would be happy with this wrench as I have been.
Question:	does it have a Nm scale
Answer:	Yes. 5.6-23.7 Nm or 40-200 in-lbs.
Question:	Does this come with the hard plastic case
Answer:	Yes, it does Red hard plastic case.

Product description

This CDI Torque 3/8-Inch drive metal handle click type torque wrench offers the user a rugged, industrial strength torque wrench able to withstand the rigors of professional use. Handles are lightly knurled for a tough, non slip grip. It has a dual scale which is calibrated in dual direction. It has a positive lock with a spring loaded pull down lock ring. It features a fast, accurate and easy to set as well as easy to read laser marked scales. It also features a quick release buttons which provide good socket retention as well as easy socket removal. The torque range is 5 to 75 foot pounds.

• Torque range is 5 to 75 foot pounds
• Dual scale, calibrated dual direction
• Positive lock with spring loaded pull down lock ring
• Fast, accurate and easy to set
• Easy to read laser marked single scale

User questions & answers

Question:	Does dual scale mean both Ft/Lb and Nm scales are marked on the wrench
Answer:	I own this wrench and yes, both Ft/Lb and Nm are marked on the wrench.
Question:	Does it come with a case
Answer:	As of 01-10-2020 it does come with what appears to be a very nice and solid black poly case.
Question:	How accurate are they at 95 ft lbs or 15 ft lbs
Answer:	The CDI 1503MFRMH is no longer being calibrated at 20ftlbs, scale no longer starts at 10ftlbs, changed to 20ftlbs and calibration now starts at 30ftlbs, maybe to keep people from using the 10ftlbs setting that may have been to fare off, who knows?
Question:	where is this wrench made
Answer:	It looks similar to some of the ones found at Lowes but the feel and quality between the two wrenches are a huge difference. High quality wrench. Love it!

Product description

Armstrong Industrial Hand Tools have a heritage of Made in the USA since four brothers founded the company in 1890. Armstrong brand sockets feature precise geometry for an exacting fit and are designed to withstand the toughest conditions from our factory floors to the U.S. Military. All sockets have a lifetime warranty to back up our commitment to industrial grade tools. Product Name: 1/4-Inch Drive Standard Length Metric Socket Set, Product Name: 1/4DR Standard Length Metric Socket Set, Finish: Full Polish Chrome, Weight: 0.09, Length Format: Standard, Drive Tang Size: 1/4, Drive Type: 6 Point, SAE/Metric: Metric, Set Included Storage: Metal Socket Rail, Set Piece Count: 10, ASME Specification: B107.5m-2002, US Federal Specification: , Laser EYE-D: No.

• Thin wall design with precise fastener end dimensions meet industrial specifications
• Radius corner design provides 15-20-Percent more torque which extends fastener life and reduces slippage
• Proudly manufactured in the USA
• Lifetime Warranty

User questions & answers

Question:	What size range is this set
Answer:	Small: 13mm down to 4mm.

Product description

069-64-094 Features: -Ball bearing signal mechanism. -Compact, strong, and hard wearing tear-drop ratchet head. -Scale stamped on spring tube. -Detent-style locking collar. Use: -Ratcheting Wrench/Torque Wrench. Size: -1/2"/3/4"/3/8". Quantity: -Set. Measurement Type: -SAE. Product Type: -Wrenches. Dimensions: Overall Product Weight: -15.84 Pounds.

From the Manufacturer

Proudly made in the U.S.A. with a limited warranty. Accurate in the clockwise direction to +/-3 -percent between 20-percent and 100-percent of the tool's range for outstanding torquing consistency. Detent style locking collar prevents accidental change of torque setting during operation ensuring fasteners are installed properly. Tear drop ratchet head design is compact, strong, and extremely durable for a better, longer lasting tool. Anodized aluminum handle is slightly knurled for a comfortable, non-slip grip.

• 3/4 Torque Wrenches