11 best tekton gear head drive socket sets

Product description

Get awesome access with the TEKTON 1/4 in. Drive Swivel Head Ratchet. Made for tight spots, its round head swivels continously 270 degrees to find the perfect angle of attack and its 72-tooth ratchet needs only 5 degrees of swing arc to operate. Made from premium quality chrome molybdenum steel, it is protected from rust and corrosion by a tough, chrome plated finish. Sockets lock onto the quick-release drive tang so you don't have to worry about dropping them. Two-material molded handle has soft rubber grips for non-slip control, even with greasy hands. The ratchet meets or exceeds ANSI performance and dimensional standards.

• Round head swivels 270-Degree to any drive angle
• 72-tooth round head ratchet needs only 5-degree swing arc
• Lock-on, push-button, quick-release drive tang prevents dropped sockets
• Forged and heat treated chrome molybdenum steel construction with corrosion-resistant chrome plated finish
• Comfortable molded handle with soft, non-slip grip

User questions & answers

Product features

270° Swivel Head

Pivoting through a continuous 270-degree sweep, the round swivel head lets you approach your work from any angle. Since there are no preset positions, you can even move fluidly around obstructions encountered along the path of your handle swing.

Lock-On, Quick-Release Drive

Sockets are locked onto the ratchet tang by a detent ball and locking pin so that they can't fall or be pulled off. Pressing the release button allows the sockets to easily drop off the tang, making even one-handed socket changes possible.

Comfortable, Nonslip Handle

Two-material molded handle has soft grips for nonslip control, even with greasy hands.

Product description

TEKTON 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. The large, die-stamped markings are permanently impressed into the material and optimized for readability.

• Includes 12-pc. 3/8 in. drive 6-point sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm; Socket rail
• 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads
• Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
• Standard-length socket is relatively versatile and suitable for a wide range of applications
• Extra-large die-stamped size markings are easy to read and can’t wear off
• Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
• Four detent grooves provide a secure connection with the drive tool

User questions & answers

Product features

Large, Stamped Markings

Roll-stamped markings are permanently impressed into the material and are clear even in low light settings.

Prevent Fastener Round-Off

Radiused corners in the socket opening apply force to a fastener's flat sides, rather than its corners.

Secure Drive Tool Engagement

Four detent grooves in the socket drive end provide a secure connection with the retaining ball of a drive tool.

Socket Rail Storage

Patented twist-to-lock design securely holds sockets on the rail. Keyhole slot mounts to wall or workbench.

Product description

With a 90-tooth gear that produces a working swing arc of just 4 degrees, Tekton ratchets don't need much room to operate. Smaller than "low profile", their ultra-compact heads are reduced in every dimension—height, width, and length—allowing them to slip into tighter spaces than other ratchets. The polished exterior has a chrome plated finish that's corrosion-resistant and easy to wipe clean.

• Includes 1-pc. flex ratchet: 1/4 in. drive x 6 in.; 2-pc. long flex ratchets: 3/8 in. drive x 12 in., 1/2 in. drive x 14 in.; 1-pc. stubby ratchet: 3/8 in. drive x 4.5 in.
• 90-tooth gear produces a working swing arc of just 4 degrees
• 180-degree, 9-position flex head lets you approach your work from any angle
• Ultra-compact head is smaller than "low profile"—it's reduced in height, width, and length
• Classic pull-release drive tang retains sockets with a spring-actuated detent ball
• Biased drive direction switch ensures the ratchet gear is engaged at all times, preventing slips or free-wheeling
• Sleek and simple handle design offers comfort and control in a variety of hand positions

User questions & answers

Product features

90-Tooth Gear = 4° Swing Arc

Smooth and refined, the 90-tooth ratcheting system offers a concise 4° swing arc. Depending on the drive size, the single half-moon pawl maintains 6 to 9 teeth (more than most dual pawl designs) in contact with the gear at all times, ensuring it will never slip or skip under stress.

Ultra-Compact Head

Unlike conventional "low profile" designs that focus on controlling only the thickness of the head, we reduced the size in every dimension: height, width, and length. And most importantly, we did it without compromising strength.

Classic, Non-Quick-Release Drive

Sockets are held onto the ratchet tang by a spring-actuated detent ball. Simply push the sockets on and pull to remove them. This lean design gives the ratchet a flat back (where otherwise there would be a release button) for even better clearance.

Sleek, Comfortable Handle

The finger ring has pronounced interior edges for traction and control, and is useful for any finger placement. The pommel at the end of the handle keeps your hand from slipping off the end, but is also rounded so that it's comfortable for your hands.

Product description

TEKTON 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. The large, die-stamped markings are permanently impressed into the material and optimized for readability.

• Includes 15-pc. 1/2 in. drive 6-point sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm; Socket rail
• 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads
• Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
• Standard-length socket is relatively versatile and suitable for a wide range of applications
• Extra-large die-stamped size markings are easy to read and can’t wear off
• Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
• Four detent grooves provide a secure connection with the drive tool

User questions & answers

Product features

Large, Stamped Markings

Roll-stamped markings are permanently impressed into the material and are clear even in low light settings.

Prevent Fastener Round-Off

Radiused corners in the socket opening apply force to a fastener's flat sides, rather than its corners.

Secure Drive Tool Engagement

Four detent grooves in the socket drive end provide a secure connection with the retaining ball of a drive tool.

Socket Rail Storage

Patented twist-to-lock design securely holds sockets on the rail. Keyhole slot mounts to wall or workbench.

Product description

TEKTON 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. The large, die-stamped markings are permanently impressed into the material and optimized for readability.

• Includes 13-pc. 1/4 in. drive 6-point sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm; 13-pc. 1/4 in. drive deep 6-point sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm; 1-pc. universal joint: 1/4 in. drive; 2-pc. 1/4 in. drive extensions: 3, 6 in.; 1-pc. hex bit holder: 1/4 in. drive x 1/4 in.; 1-pc. spinner handle: 1/4 in. drive x 6 in.; 1-pc. 1/4 in. drive quick-release ratchet: 8 in.; 1-pc. storage case
• 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads
• Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
• Standard-length socket is relatively versatile and suitable for a wide range of applications
• Extra-large die-stamped size markings are easy to read and can’t wear off
• Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
• Four detent grooves provide a secure connection with the drive tool

User questions & answers

Product features

Large, Stamped Markings

Roll-stamped markings are permanently impressed into the material and are clear even in low light settings.

Prevent Fastener Round-Off

Radiused corners in the socket opening apply force to a fastener's flat sides, rather than its corners.

Fully Stepped Shoulders

Narrowed diameter on smaller sizes stretches to the base of the socket, providing reach into tight, recessed areas.

Product description

TEKTON 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. The large, die-stamped markings are permanently impressed into the material and optimized for readability.

• Includes 19-pc. 3/8 in. drive 6-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm; 19-pc. 3/8 in. drive deep 6-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm; 1-pc. universal joint: 3/8 in. drive; 2-pc. 3/8 in. drive extensions: 3, 6 in.; 1-pc. 3/8 in. drive quick-release ratchet: 8 in.; 1-pc. storage case
• 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads
• Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
• Standard-length socket is relatively versatile and suitable for a wide range of applications
• Extra-large die-stamped size markings are easy to read and can’t wear off
• Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
• Four detent grooves provide a secure connection with the drive tool

User questions & answers

Product features

Large, Stamped Markings

Roll-stamped markings are permanently impressed into the material and are clear even in low light settings.

Prevent Fastener Round-Off

Radiused corners in the socket opening apply force to a fastener's flat sides, rather than its corners.

Fully Stepped Shoulders

Narrowed diameter on smaller sizes stretches to the base of the socket, providing reach into tight, recessed areas.

Product description

TEKTON 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. Their extended length allows the deep socket to fit over long fasteners and reach into recessed areas. The large, die-stamped markings are permanently impressed into the material and optimized for readability.

• Includes 14-pc. 1/4 in. drive deep 6-point sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 mm; Socket rail
• 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads
• Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
• Deep-length sockets reach into wells and accommodate the excess threads of longer shafts
• Extra-large die-stamped size markings are easy to read and can’t wear off
• Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
• Four detent grooves provide a secure connection with the drive tool

User questions & answers

Product features

Large, Stamped Markings

Roll-stamped markings are permanently impressed into the material and are clear even in low light settings.

Prevent Fastener Round-Off

Radiused corners in the socket opening apply force to a fastener's flat sides, rather than its corners.

Fully Stepped Shoulders

Narrowed diameter stretches to the base of the socket on small, deep-length sizes. This provides greater reach into tight, recessed areas.

Socket Rail Storage

Patented twist-to-lock design securely holds sockets on the rail. Keyhole slot mounts to wall or workbench.

Product description

TEKTON 1/4 inch drive 12-point sockets are an exact fit for double hex fasteners and also work with hex and square shapes. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. Their extended length allows the deep socket to fit over long fasteners and reach into recessed areas. The large, die-stamped markings are permanently impressed into the material and optimized for readability.

• Includes 11-pc. 1/4 in. drive deep 12-point sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in.; Socket rail
• 12-point opening fits double hex (12-sided), hex, and square-shaped fasteners
• Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
• Deep-length sockets reach into wells and accommodate the excess threads of longer shafts
• Extra-large die-stamped size markings are easy to read and can’t wear off
• Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
• Four detent grooves provide a secure connection with the drive tool

Product features

Large, Stamped Markings

Roll-stamped markings are permanently impressed into the material and are clear even in low light settings.

Prevent Fastener Round-Off

Radiused corners in the socket opening apply force to a fastener's flat sides, rather than its corners.

Fully Stepped Shoulders

Narrowed diameter stretches to the base of the socket on small, deep-length sizes. This provides greater reach into tight, recessed areas.

Socket Rail Storage

Patented twist-to-lock design securely holds sockets on the rail. Keyhole slot mounts to wall or workbench.

• Includes: 8-pc. 3/8 in drive long hex bit sockets: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8 in and storage case
• S2 Steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
• 6-Sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners
• Extra-long bits allow you to reach deep into especially narrow, recessed areas
• Large, clear die-stamped size marking is easy to read and can’t wear off
• Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin

User questions & answers

Product description

Covering a range of sizes from 3/8 in. to 1-1/4 in., the 12-point TEKTON 1/2 in. Drive Impact Sockets are built for use with impact wrenches to loosen the most stubborn 12-point fasteners commonly found in European cars without stripping them.

From the Manufacturer

Covering a range of sizes from 3/8 in. to 1-1/4 in., the 12-point TEKTON 48161 1/2 in. Drive Shallow Chrome Vanadium Sockets are built for use with impact wrenches to loosen the most stubborn 12-point fasteners commonly found in European cars without stripping them.

• Includes 14-pc. 1/2 in. drive 12-pt. impact sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4 in.; Storage case
• High-torque, 12-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off
• Standard socket depth provides access to fasteners in tight spaces
• High-contrast permanent laser etched size markings are easy-to-read, even in low light
• Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish
• Meets or exceeds ANSI performance standards
• High-torque, 12-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off

Product features

TEKTON 1/2-Inch Drive Shallow Impact Socket Set, Inch, 3/8 - 1-1/4-Inch | 48161

Covering a range of sizes from 3/8 in. to 1-1/4 in., the 12-point TEKTON 1/2 in. Drive Shallow Sockets are built for use with impact wrenches to loosen the most stubborn 12-point fasteners commonly found in European cars without stripping them.

Product description

For a ratchet that won't freeze your hand in cold weather and won't scratch fine finishes, choose the TEKTON 1/2 in. Drive Composite Ratchet. At its core is a tough chrome vanadium steel handle and head, hardened and strengthened through a precise heat treating process. The high-impact poly shell is softer than metal parts so it is safe to use near chrome, aluminum and painted surfaces. Great in tight spaces, the 72-tooth oval head ratchet needs only a 5-degree swing arc. Large dual pawls grip without slipping, delivering more torque. Drive direction is easily changed with the thumb-operated reverse switch. Sockets lock onto the quick-release drive tang so you don't have to worry about dropping them. The offset handle provides extra finger clearance, preventing scraped knuckles. The ratchet meets or exceeds ANSI performance and dimensional standards.

• 72-tooth gear produces a working swing arc of just 5 degrees
• Quick-release drive tang locks securely on to sockets so they won't accidentally fall off
• Strong, one-piece chrome vanadium steel head and handle
• Tough poly shell stays comfortable in cold temperatures and prevents accidental contact damage to nearby surfaces
• Offset handle design with soft, nonslip grip gives fingers extra clearance

User questions & answers

Product features

72-Tooth Gear = 5° Swing Arc

Dual pawls maintain four teeth in contact with the gear at all times, ensuring that it won't slip or skip under stress.

Lock-On, Quick-Release Drive

Sockets are locked onto the ratchet tang by a detent ball and locking pin so that they can't fall or be pulled off. Pressing the release button allows the sockets to easily drop off the tang, making even one-handed socket changes possible.

Offset Handle

The offset handle creates extra working clearance for fingers, preventing scraped knuckles, and features a soft, contoured grip for nonslip control, even with greasy hands.