13 best lisle socket holders

Product description

Lisle magnetic socket holder has 28 compartments that allow you to keep 3/8" standard and deep sockets in one convenient holder. It holds sockets put 1" or 24mm. Powerful magnets securely hold sockets in tray and tray to any steel surface.

• Organizes 3/8" fractional and metric sockets for easy storage
• Features 28 socket compartments for both standard and deep sockets
• Made of ABS plastic for durability
• Open sign for easy identification of sockets
• Magnets hold sockets in tray and tray to steel surface

User questions & answers

Question:	Where is this tool made
Answer:	If mine stands vertical the large deep sockets fall out. If I shake it most of the deep sockets fall out and the larger standard sockets fall out.
Question:	Is there a difference between the different colored holders other than the colors
Answer:	Yes you can remove the clips and put them on one of the other rails
Question:	Are the slots big enough to hold impact sockets
Answer:	I think I would return it, mine was in good shape when I got it & it works good so far.
Question:	If you hold vertically/shake lightly, will big sockets fall out
Answer:	Just to have a view, other than the seller's, I was highly worried about this as well. I usually grab an entire cheapie rail and go. Normal 3/8" sockets are fine on my cheapies, but deep 3/8" would always fall off, or come off on my cheap rails. THESE rails, I can easily pick up the deep socket rail by grabbing a few of them, and lift the whole thing out np. I did some minor wiggle tests to make sure they wouldn't fall off while hanging, all good. I am super impressed with these holders for the price.

Product description

8 Piece, Tap Socket Set, For Use In Restricted Areas & Is Ideal For Use In Areas Where A T-Handle Won't Fit, Fits All Number & Fractional M.C.T.I. Standard Taps Thru 1/2", Also Fits 1/8" NPT Taps & Metric Taps Thru 12mm Manufactured To M.C.T.I. Standards, Sockets Contained On A Vinyl Holder, Made Of Heat Treated Alloy Steel. This product is highly durable. This product is made in USA.

• For Use in Restricted Areas. Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards. Sockets contained on a vinyl holder.
• Ideal for use in areas where a T handle won't fit.
• Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2".
• Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards.
• Sockets contained on a vinyl holder.
• Ideal for use in areas where a T handle won't fit
• Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2 inch

User questions & answers

Question:	Are these now made in China
Answer:	I've had a set for four yrs., which was made in the U.S., but more recent sets may be coming in from China. Lisle used to make everything here, but alas, things change. It would be best to contact Lisle directly for the current COO (Country Of Origin) for production details.
Question:	what size is the driver 3/8" or
Answer:	The first 4 sizes (smaller) are 1/4" drive, and the bigger 4 are 3/8"
Question:	Will any of these fit an M14x1.25 tap
Answer:	For the most part metric taps will have an American Standard shaft and drive square on the back. I just checked and I do not have a 14 mm but I have a 12. The shank is 3/8 (.375) and the square is 9/32's (.281) and it fits fine in my #6, I've bought the entire set through 11. A 14mm, guessing should fit in a #7 or 8 but the set your showing in #9-11. If your tap is American made they are made to accommodate American tools, my 2 Japanese made 12mm were smaller in these areas and of metric size. I will say this about these drivers, when you need them NOTHING else will do but 980% of the time a regular Tap handle will do.
Question:	In the details, it says made in china. It also say made in United States. where are they made
Answer:	The set I have says made in China. It is a really good set in spite of that.

Product features

Lisle 70500 Tap Socket Set

Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M.C.T.I. standards. Sockets contained on a vinyl holder.

In Use

In Use

In Use

• ★ HIGH CAPACITY - These Olsa Tools Magnetic Socket Organizer Set Kit (for SAE sockets) can store up to 68 of your 1/4", 3/8", and 1/2" drives SAE sockets. That's right all of your tools in one place, what you always wanted. Start enjoying the neatness and organization you deserve.
• ★ POWERFUL MAGNETIC BASE - These magnetic socket holders and tools organizers are engineered with a strong ferrite magnet base that securely holds your sockets in place. Have the peace of mind knowing that your sockets will only leave these socket trays when you need it for a job; never by accident.
• ★ SCRATCH-FREE MOUNTING - Everything in your garage or shop is an INVESTMENT for yourself, and should be treated as such. That's why we built these magnetic organizers for sockets with a RUBBERIZED magnetic base that will NEVER scratch any steel surface you mount it on. So go ahead and mount it on your toolbox or steel wall; we have your back.
• ★ WORKS WITH REGULAR SOCKETS - If you've been looking for a magnetic socket organizer tray that can hold both DEEP and SHALLOW sockets, then your search is over, now you have three. These holders for sockets are compatible with your deep and shallow 1/4", 3/8", and 1/2" drive SAE sockets (compatible sizes marked in images, impact sockets do not fit).
• ★ OLSA TOOLS TRUST - Our deep commitment to quality is the reason why tool fanatics like yourself keep coming back to us for more. All Olsa Tools products are backed by a limited lifetime warranty that protects your investment against any manufacturer's defects. All you need to do is get in touch with us and we'll make it right by you. Guaranteed.

User questions & answers

Question:	When will the 1/4 sae green be available again? thanks
Answer:	The 1/4 SAE Green will be back in stock around April 12th.
Question:	Can I buy one holder instead of
Answer:	Yes, you can buy 1 socket holder instead of 3 by selecting the intended size on the drop-down menu.
Question:	Will this fit in a 3” drawer
Answer:	3/8" drive socket holder with deep sockets is 2-3/4" high, should work fine in 3" drawer, fits in mine fine (Craftsman Box).
Question:	When will you have more in stock
Answer:	Unfortunately, the next restock date has moved to around May 29th for the Magnetic Socket Holder.

Product features

High Capacity

These Olsa Tools Magnetic Socket Organizer Set Kit (for SAE sockets) can store up to 68 of your 1/4", 3/8", and 1/2" drives SAE sockets. That's right all of your tools in one place, what you always wanted. Start enjoying the neatness and organization you deserve.

Works With Most Types Of Sockets

If you've been looking for a magnetic socket organizer tray that can hold both DEEP and SHALLOW sockets, then your search is over, now you have three. These holders for sockets are compatible with all your deep and shallow 1/4", 3/8", and 1/2" drive SAE sockets.

Powerful Magnetic Base

These magnetic socket holders and tools organizers are engineered with a strong ferrite magnet base that securely holds your sockets in place. Have the peace of mind knowing that your sockets will only leave these socket trays when you need it for a job; never by accident.

Scratch-Free Mounting

Everything in your garage or shop is an INVESTMENT for yourself, and should be treated as such. That's why we built these magnetic organizers for sockets with a RUBBERIZED magnetic base that will NEVER scratch any steel surface you mount it on. So go ahead and mount it on your toolbox or steel wall; we have your back.

SOCKET SYMMETRY

With the Olsa Tools Magnetic Socket Organizer, wasting your valuable time searching for the right socket is never an option.

Holds up to 68 sockets so that you will never lose sight of your sockets again.

STRONG MAGNETIC BASE

Securely hold your new Olsa Tools Magnetic Socket Organizer to any steel surface with its strong magnetic base.

QUALITY YOU CAN COUNT ON

Buying Olsa Tools means you are buying quality. Our deep commitment to quality is the reason that customers like yourself keep coming back to us for more.

The Olsa Tools Magnetic Socket Organizer is flawlessly compatible with most types of sockets.

Organize both your shallow AND your deep sockets with this socket organizer.

Try it out today — you will thank yourself late

Product description

Organize your tool box drawer. Pliers/Wrench Rack is constructed out of plastic and will hold up to 13 tools. There are two different size of slots to accommodate all sizes of tools. The front edge also has indentions to hold tools upright. See 40460 for black.

• The front edge also has indentions to hold tools upright
• There are two different sizes of slots to accommodate all sizes of tools
• Rack is constructed out of plastic and will hold up to 13 tools
• Country of Origin : United States

User questions & answers

Question:	Will this work fore vise grip storage
Answer:	The rack has two sizes of slots, more than half are pretty narrow, suitable for the end of a screwdriver or small pliers. I think there were only about 4 or 5 slots wide enough for larger pliers or a vice grip.
Question:	How wide are the slots
Answer:	The slot widths vary. The narrow slots hold needle nose pliers well. The wider slots will hold diagonal cutters and standard size slip joint pliers.

• ★ HOLDS UP TO 22 SOCKETS - This 1/2-Inch Drive magnetic socket tray can store up to 22 of your sockets. Finally, you can own a tool organizer where you can put all of your messy sockets into one easy to find place for yourself.
• ★ UNBELIEVABLE MAGNET - This socket magnetic organizer is equipped with ultra-strong rare earth (neodymium) magnets that store your sockets FIRMLY and SECURELY. Your sockets will stay inside of this magnetic socket tray no matter how hard you are on it.
• ★ COMPATIBLE WITH ALL SOCKET TYPES - This Olsa Tools organizer for sockets is designed as a socket holder that can hold both deep and shallow 1/4" drive SAE AND Metric sockets, adapters, and small extensions.
• ★ EASY PORTABILITY + MOUNTING - Cleverly designed with a handle that lets you carry this magnetic socket tray anywhere on the job. Need to get home to work on the truck? Easy, just unmount the socket holder and carry it with you on the way home. Wherever you are, you can mount this organizer for sockets on almost any steel surface.
• ★ SATISFACTION GUARANTEED - We are firmly committed to quality and giving the best experience to great people like you, all Olsa Tools products have a limited lifetime warranty. Buy with ease, and start using your new Magnetic Portable Socket Organizer today.

User questions & answers

Question:	Would this work in a tool backpack
Answer:	Yes, they will hold impact socket.
Question:	is there any versions that have deep well on both sides
Answer:	Okay I don't understand your question I don't have half inch drive I have quarter Drive
Question:	Are there additional magents in the back for holding the tray to steel surfaces
Answer:	Yes
Question:	Will they hold impact sockets
Answer:	Hi, Thank you for your interest in our products. Here is the schedule of availability of our products. 70237 - Should be back in stock on February 25th. 19pc 1/2" Metric Magnetic Socket Holder Thank you for your business. We really appreciate it. Regards, ARES Tool Customer Service Team

Product features

Holds Up To 22 Sockets

This 1/2-Inch Drive magnetic socket tray can store up to 22 of your sockets. Finally, you can own a tool organizer where you can put all of your messy sockets into one easy to find place for yourself.

Unbelievable Magnet

This socket magnetic organizer is equipped with ultra-strong rare earth (neodymium) magnets that store your sockets FIRMLY and SECURELY. Your sockets will stay inside of this magnetic socket tray no matter how hard you are on it.

Compatible With All Socket Types

This Olsa Tools organizer for sockets is designed as a socket holder that can hold both deep and shallow 1/2" drive SAE AND Metric sockets, adapters, and small extensions.

Easy Portability + Mounting

Cleverly designed with a handle that lets you carry this magnetic socket tray anywhere on the job. Need to get home to work on the truck? Easy, just unmount the socket holder and carry it with you on the way home. Wherever you are, you can mount this organizer for sockets on almost any steel surface.

Easy Socket Organizing

With Olsa Tools’ Portable Magnetic Socket Tray, wasting your valuable time searching for the right socket is never an option.

Quickly and easily organize all of your sockets so you can do your job better.

Goodbye, Messy Sockets

The Olsa Tools Portable Magnetic Socket Tray can hold up to 26 of your sockets.

You Are Past The Days Of Looking Through Your Pile Of Messy Sockets To Find The Right One

Put all of your deep and shallow SAE and Metric sockets in your new magnetic socket tray.

Quality You Can Count On

Buying Olsa Tools means you are buying quality. Our deep commitment to quality is the reason that customers like yourself keep coming back to us for more.

Here at Olsa Tools, we believe in providing you real value. That means we will never over-charge you for our professional, tool-truck quality tools. Almost every tool you buy comes straight out of the same factories as the biggest tool truck brands in the world.

Product description

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt.

• Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications
• Made with heat-treated, impact quality alloy steel; Use with 1/2" drive

User questions & answers

Question:	Will this work with my kobalt corded impact gun
Answer:	I am not sure of your impact gun’s torque rating, mine is rated at 650 ft pounds. I have seen videos of people using this socket with cordless impact guns and it worked for them. So I would think that it would, just can’t say for certain that it will. Hope this helps.
Question:	Will this socket fit through the center of the holding tool? Just in case I need to use both at once
Answer:	Don't know have never needed to use both. This socket will take off crank bolts on honda with almost any 1/2 air impact. This is a must have tool for Honda timing belts. Has never failed to remove bolt for me using my old beat up ingersoll 231c.
Question:	Engine turns clockwise (when looking at the nut.) It should never be turned counter-cw. This will drive engine counter-cw if bolt is too tight
Answer:	Usually this tool is used when replacing a Honda timing belt. Once you install the new belt (after aligning all the timing marks), you can ONLY turn the crankshaft counter-clockwise. Turning it by hand clockwise WILL result in the timing belt jumping teeth. Once you are sure timing is correct you tighten the pulley bolt to the required lb/ft.
Question:	Can this socket be used with a big breaker bar to get the job done? Or is impact wrench required
Answer:	The socket will fit the bolt and the breaker bar will fit the socket but there is no way you can hold the crankshaft from turning if you use this socket with the breaker bar. In order to use a breaker bar you must install the crankshaft holding tool that has a hole through the center to put a deep socket through to the crankshaft bolt. This socket is way too thick walled and will not go through the center of the holding tool. This socket on an impact gun, works without the using a crankshaft holding tool and it works real good.

Product features

Lisle 77080 19 mm Harmonic Balancer Socket for Honda

This Heavy-Duty Impact Socket is Designed with the Standard Socket Mass to Direct More Energy to Removing the Bolt.

Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Made with heat-treated, impact quality alloy steel. Use with 1/2" drive.

Product description

The OEMTOOLS 22413 6 Piece Socket Storage Trays are designed for professionals. This socket tool organizer set includes three metric socket tray organizers and three shallow SAE organizers. The largest tray is just over 20-1/4 inches long and 3-3/4 inches tall, which means the OEMTOOLS Socket Storage Organizer will fit within most mechanics' tool chests and work benches. This OEM tool chest socket organizer can store and organize 80 SAE and 90 Metric Sockets--40 deep-well and 40 shallow SAE sockets, and 45 deep-well and 45 shallow metric sockets. Our lightweight red and gray socket organizer for tool box storage is made of a rugged ABS plastic that is tough enough to stand up to a lifetime of use. This durable automotive socket holder is designed with mechanics in mind. The posts on each socket set tray make it easy to slip sockets on and keep them secure. And when you need a particular socket, it slides right off the socket rack organizer post. The wide bases on each socket set storage tray prevent them from tipping over, even when your tool box is jostled. We’ve designed our socket set organizer tray to work so well that you never have to think about your sockets again.

• TOOL BOX SOCKET ORGANIZER: Store and organize 1/4”, 3/8”, and 1/2” drive sockets; These socket organization trays store a wide array of the most popular SAE and Metric mechanic sockets; Sockets organizer stores shallow and deep-well sockets
• ORGANIZED WORKSPACE: Toolbox organizer tray posts are clearly labeled with measurements for easy identification; Never misplace another socket with this labeled socket organizer; Our plastic socket holder cleans up cluttered tool boxes and workspaces
• SECURE HOLD: Every shallow and deep socket holder features an extended base to keep sockets in place; Each socket set holder organizer is designed not to tip over, so sockets won’t come loose or dislodge; Sockets are not included
• LONG-LASTING SOCKET STORAGE: This lightweight socket organizer for toolboxes is made of a rugged ABS plastic that is strong enough to endure a lifetime of use; Durable socket organizer tray for toolbox storage is designed with professionals in mind
• COMPREHENSIVE SAE AND METRIC SOCKET HOLDER SET: 1/8” - 5/8”, 4mm - 15mm (1/4" drive socket organizers); 1/4” - 1”, 6mm - 20mm (3/8 socket organizer); 3/8" - 1-1/4", 10mm - 27mm (1/2" drive socket organizers)

User questions & answers

Question:	can you buy the kit in red and black? And buy the 1/2 in black and red individually? I don't see those options
Answer:	no together
Question:	Is there enough space for 1/2" drive 1.5" socket
Answer:	No, pegs stop at 1-1/4”
Question:	How do they mount
Answer:	They don’t necessarily “mount”. The sockets simply rest in their dedicated spot sitting upright. The trays are able to be fixed to a board, bench or wall via a screw or nail hole in the base. Although mounting vertically I imagine is not ideal because the sockets are not locked into place by any means. Hope this helps y’all
Question:	Since the 'product dimensions' in the description is useless... what is the maximum height of the tallest piece? This is what a buyer needs to know
Answer:	Tallest tray is 3.9" The dimensions are also listed in the image.

Product features

High Capacity

These OEMTOOLS Socket Trays hold up to 170 sockets letting you keep everything needed in one place! Designed for 1/2”, 3/8”, and 1/4” drive sockets, and measured to fit easily in your toolbox!

Colored for Convenience

The colored bases let you easily discern between metric or saw sockets. Plus, OEMTOOLS offers multiple options so you can decide what you want to see!

Sockets are not included.

Extended Bases Secure Sockets

The extended bases keep your sockets securely placed and the trays are designed not to tip!

Sockets are not included.

Store Deep and Shallow Sockets

Store both your deep and shallow sockets and identify the size quickly with these easy-to-read posts!

Sockets and toolbox are not included.

6 Piece Socket Tray Set is designed to fit in most workbenches and tool chests

3 Orange SAE socket organizers hold a total of 80 SAE sockets.

Product description

ELIMINATE TOOLBOX CLUTTER & SAVE TIME – This complete socket trays set is designed for eliminating your toolbox cutter and keeping it organized. Make it convenient for you to find the dedicated socket instantly







FAST TO RECOGNIZE – Each posts marked with clear socket sizes for instant identification to save your time. Red SAE and black Metric socket tray make it easy to distinguish when they mixed







SAFE STORAGE – Made from durable ABS that can keep your socket from oil and gas. Featuring extended base to hold your socket securely







COMPLETE SAE & METRIC RANGE – Fit for SAE size from 1/8” to 5/8” (1/4" drive), 1/4” to 1” (3/8" drive), 3/8" to 1-1/4"(1/2" drive). Metric size from 4mm to 15mm (1/4" drive), 6mm to 20mm (3/8" drive), 10mm to 27mm (1/2" drive)







AVAILABLE FOR BOTH DEEP & SHADOW – Dual rail design support storing both deep and shadow at the same time

• ELIMINATE TOOLBOX CLUTTER & SAVE TIME – This complete socket trays set is designed for eliminating your toolbox cutter and keeping it organized. Make it convenient for you to find the dedicated socket instantly
• FAST TO RECOGNIZE – Each posts marked with clear socket sizes for instant identification to save your time. Red SAE and black Metric socket tray make it easy to distinguish when they mixed
• SAFE STORAGE – Made from durable ABS that can keep your socket from oil and gas. Featuring extended base to hold your socket securely
• COMPLETE SAE & METRIC RANGE – Fit for SAE size from 1/8” to 5/8” (1/4" drive), 1/4” to 1” (3/8" drive), 3/8" to 1-1/4"(1/2" drive). Metric size from 4mm to 15mm (1/4" drive), 6mm to 20mm (3/8" drive), 10mm to 27mm (1/2" drive)
• AVAILABLE FOR BOTH DEEP & SHADOW – Dual rail design support storing both deep and shadow at the same time

User questions & answers

Question:	How tall are they? Particularly the 1/2 inch socket holder. I have about 3 1/2 height in my drawer
Answer:	The tallest rack is 3-1/2". They fit perfectly in my 3-1/2" deep Craftsman and Snap-On boxes.
Question:	Will these fit in a standard toolbox draw, or only in a deep draw
Answer:	They only fit in my deep drawers. Turn your deep week sockets up then add about 1/2” on top and you’ll get an idea where they will fit in your box.
Question:	Do the sockets clip on? I need to be mobile and throw them in a bag and go. Will these stay put
Answer:	They do not clip in, the socket goes over top.. if you stand them up straight you might be alright
Question:	Where is this made
Answer:	A place that doesn’t know how to properly measure the holders. Some sockets fit, some not so much

Product description

For External Torx Bolts.

• 26280 includes 10 sizes, E5 through E20
• The four smaller sizes are 1/4" drive; the next four sizes are 3/8" drive, the two largest sizes are 1/2" drive
• Made of heat-treated alloy steel
• Sockets are kept in a convenient vinyl holder
• Made in USA

User questions & answers

Question:	I'm going to show some ignorance here, please be patient. don't i need the male bit for these? and if so which do i purchase
Answer:	You need 1/4, 3/8, 1/2'' drive ratchets on these sockets, they fit Torx head bolts. otherwise you need 27200 Torx bit set for the female heads.
Question:	The product description says both made in united states and china. which is it
Answer:	My information states that the LIS26750 is made in the USA, as are 98% of the Lisle line.
Question:	What is the OD for the E8? Working in tight spot
Answer:	Ratchet end is 1/2" and the other end is 7/16"
Question:	what are the actual socket sizes, one at a time please
Answer:	The sizes are 5,6,7,8,10,12,14,16,18,20. And of course, those are NOT millimeters, just Torx numbers.

Product description

Mortorq Bit Set, 5pc. Is for removing & installing MORTORQ Fasteners found on Chrysler, GM, Jeep, & other models.

• The fasteners are used in a variety of applications including bell housings, interior components, door frames, body components and more
• Sockets are made of heat-treated alloy steel
• Includes sizes MTS-0, MTS-1, MTS-2, MTS-3 and MTS-4
• Use with 3/8" square drive
• Includes vinyl holder for storage

User questions & answers

Question:	Has anyone used these on a 4l60e bellhousing? i was told to buy the snap-on mts-4, but for how often i use it, it's hard to justify the price vs these
Answer:	We use the Mortorq bitts to remove Jeep, Chrysler seat bolts . These bolts are threadlocked and so far the Lisle bits haven't shattered. So i recommend them, especially at the price compared to one Snap on bit.
Question:	Are these made in the USA
Answer:	I know Lisle is an American Co. but I didn't pay attention to the packing, and the tools are not marked individually. I doubt they are made in the USA, but I can't say I know for certain, sorry.

Product description

Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.



Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel. On 4500 and 5500 trucks, remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place. Use 36mm 12 point socket with 3/4" square drive to remove harmonic balancer bolt and re-torque on installation. 36mm 12 point socket can also be used on axle nuts.

• Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions
• Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement
• Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation
• Package dimension is 4.5 inches width by 5 inches height by 2 inches depth

User questions & answers

Question:	Will this work on a Chevy express with a duramax that does not have an Allison
Answer:	There are two different locking mechanisms included. I only use the one for the Allison and don't know specifically about the other configurations.
Question:	Will this work on lmm’s? I don’t recall seeing a place to get the tool through to the fly wheel
Answer:	Worked on my 08. Inspection port should be easy to see. By the trans filter. Saved a ton of time doing water pump.
Question:	Will this work on a 2jzgte flywheel
Answer:	It fits a Duramax.
Question:	Does the locking tool work with duramax with 480le tranny
Answer:	I didnt know they offered a 4L80 transmission with the duramax. I believe it works o ly with duramax/allison combination.

Product features

Lisle 22100 Flywheel Locking Tool for 6.6L Duramax

Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel. On 4500 and 5500 trucks, remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place. Use 36mm 12 point socket with 3/4" square drive to remove harmonic balancer bolt and re-torque on installation. 36mm 12 point socket can also be used on axle nuts.

Lisle 22100 Flywheel Locking Tool for 6.6L Duramax

Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel. On 4500 and 5500 trucks, remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place. Use 36mm 12 point socket with 3/4" square drive to remove harmonic balancer bolt and re-torque on installation. 36mm 12 point socket can also be used on axle nuts.

Lisle 22100 Flywheel Locking Tool for 6.6L Duramax

Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel. On 4500 and 5500 trucks, remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place. Use 36mm 12 point socket with 3/4" square drive to remove harmonic balancer bolt and re-torque on installation. 36mm 12 point socket can also be used on axle nuts.

Product description

Lisle 7-piece 3/8" square drive hex bit set is made of high strength, heat-treated alloy steel. The bits are securely broached into chrome plated sockets.

• Metric, Hex Bit Set
• This product is highly durable
• This product is made in United States
• Heat-treated alloy steel bits for strength
• Chrome plated sockets for durability
• Easy to use without set screws to tighten
• Vinyl storage holder for easy storage

User questions & answers

Question:	Country of orgin? The information above says China... but I thought Lisle was mostly USA
Answer:	Mine were stamped "USA", on the bits at least. I would imagine the rubber holder is likely imported.
Question:	Is usa stamped on the bits? thanks
Answer:	Mine are stamped USA on the the socket part.
Question:	what is the drive size
Answer:	The dirve size is 3/8"
Question:	Might it be handy to know which sizes are in the set
Answer:	3mm 4mm 5mm 6mm 7mm 8mm 10mm the sizes are on the package, lower left. Good set for the home mechanic, not to be used with air tools.

Product description

For 2017 Ford F-250, F-350, and F-450 bed bolts. Socket is designed to quickly engage fasteners. Can also be used on other ep-24 Torx plus applications.

• Made of strong heat-treated alloy Steel
• For use with many Ford vehicles
• Package Dimensions: 3.2 L x 12.4 H x 4.2 W (centimeters)
• Country of Origin : Taiwan, Province Of China
• Fit type: Vehicle Specific

User questions & answers

Question:	Is this 1/2 inch drive
Answer:	Yes, the socket is 1/2 inch drive and it fits perfectly the bed bolts in my 2017 F250. The bolts have "loctite" on the upper shaft and required an extension to a breakover to free.