13 best screw extractors

Product description

◉ Stripped and Damaged Screw Extractor Set by Essential Tools

The must have tool for any handyman, car or boat mechanic, contractor, carpenter, woodworker, or anyone who constantly works with screws and bolts. You know how frustrating it can be to try to remove a broken or snapped screw head, stripped bolt, painted over deck screws and much more.

 

◉ 4 Piece Extractor Set with Storage Case Includes:

1) Removes screw size: 3-5mm

2) Removes screw size: 4-8mm

3) Removes screw size: 5-10mm

4) Removes screw size: 6-12mm

Easily removes screw and bolt head types from flat head, phillips, hex, allen, torx, square, round and any other type of stripped screw or bolt you encounter.

 

◉ Quick and Easy to Use:

◈ First you want ensure that you are using a bit that is SMALLER than the screw you are trying to remove. That way it has enough room to drill a proper sized hole to extract.

◈ Slowly start to drill a hole into the screw head or bolt with the cutting size. This creates a cone shaped hole that makes it easy for the extractor head to grab onto

◈ Flip the drill bit to the extractor side. Reverse your drill and start slow to allow the threads to catch. Continue to screw or drill until the bolt or screw is fully removed

◈ And that’s it! Within a matter of seconds you easily removed that broken screw without damaging any of your other tools or bits. The high strength steel bit does all the work for you

◉ Specs:

◈ High Speed Steel 4341#

◈ Hardness 63-65HRC

◈ 4 Piece Set with included storage case

 

The Essential Tools Screw Extractor is the easiest and most reliable way to remove all your stubborn screws and bolts with ease

• APPLY TO ALL DRILLS : 4 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
• POWERFUL : Striped screw extractor removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts
• EASY TO USE : Just two simple steps will get the job done - Use a suitable size screw remover to drill a hole with cutting size and it’s easy to extract the screw or bolt using extractor tool
• HARDNESS 63-65HRC : Higher hardness material and is more durable than most screw extractors in market, the hardness and the durability are better than others, Buy with confidence and complete peace of mind
• WARRANTY :Essential Tools stripped screw extractor is backed by our 3 Tier 100% Money Back Guarantee, If you are not satisfied with the product, you can return the product for a full refund without any hassle

User questions & answers

Question:	Would this bit fit a screwdriver? And do you think I can remove a laptop screw in this manner
Answer:	it depends on how crafty you are using similar tools. I used to replace a star screw on a thin RAZER 15" laptop. I placed some pads between the table and the laptop, I didn't push too hard to press the extractor in to the screw so I didn't break the screen. also I would recommend to use very low revolutions in your drill otherwise this thing will perforate the screw and the hole in no time. If you are careful I think you can use it almost anywhere.
Question:	What is the smallest size bolt that can be removed with this extractor
Answer:	It's made in China. I couldn't find one made in the US.
Question:	Does anyone know if these will work on the tiny screws holding an rmr optic baseplate on the slide of a handgun? thanks in advance
Answer:	You should choose a size smaller than the screw hole, or you can watch the tutorial with a YouTube video
Question:	Is it safe use on a laptop
Answer:	Yes. I followed the directions that either came with the remover -- or I looked up on youtube. I can't remember. You may have to experiment with which size you use. I know the first one didn't work, but the second one was right. They did work o.k. with my problem.

Product description

How to Use:



Step 1: Please ensure that the direction of rotation in the first step must be reversed.Select the right size and slowly start drilling a hole in the screw head or bolt. This will form a conical hole, making the extraction head easy to grasp

Step 2: Switch the bit to the extractor.When a constant downward pressure is applied to the screw and moving at a low speed, pulling out the tip will bite into the screw and pull out the damaged screw Features:



High Quality: This damaged screw removal tool kit is made of high hardness HSS 4341 (hardness 63hrc) alloy steel for durability.

Easy to Operate: In just two easy steps, only the drill bit is needed, no other tools are needed, choose a smaller than the damaged screw, you can easily remove the screw, please ensure that the hole is reversed during this process.



Specifications:

Color: silver

Material: HSS tungsten carbide tip

Packing: 6 Pcs

Length: 51mm/1.97in

Extractor specifications:

0#Remove diameter 2~4mm/0.08~0.16in

1#Remove diameter 3~5mm/0.12~0.2in

2# remove the diameter 4~8mm/0.16~0.31in

3#Remove diameter 5~10mm/0.2~0.39in

4# remove diameter 6~12mm/0.24~0.47in



List:

6*Double head screw

• 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws.
• HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.
• USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw.
• MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work.
• QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is backed by our Highest Quality Promise

User questions & answers

Question:	Where is set made
Answer:	They should be identical just different sizes
Question:	I've tried 3 different sizes, following the directions each time, and I can't get the extractor side to bite in. What am I doing wrong
Answer:	It has a flip up metal handle to carry it, so yes you could put a couple of hooks on the peg board and hang it.
Question:	Do you drill in reverse for both steps? that's what the diagram that came with the tool seems to show, but i can't get these to work
Answer:	The clips are removable or can be added on this portable socket holder; however, the rails are not removable. Please contact us at [email protected] for additional questions.
Question:	Should the 5th bit from the left be smooth all the way around
Answer:	The 18” is the length of the tray, excludinng the handle.

Product description

Screw Extractor Set of 6



Made of high-density and high-quality 4341 high-speed Steel with 63-65hrc hardness.



Instructions:



➭Step 1 - First, you must make sure that the screws used are smaller than the screws you want to remove. Make sure there is enough space to drill holes of appropriate size for the screw extraction.



➭Step 2 - Start with the drill tip and drill down to create a smooth hole. Make sure the drill rotation is “forward”.



➭Step 3 - Switch the drill bit to the extraction tip. Change the Drill rotation to “reverse”. Apply a slow and constant downward pressure on the screw and move it at a low speed. The extraction tip will bite into the screw and pull out the damaged screw. It can be easily removed in just a few seconds!



Note:



Metal shavings are produced during the drilling process, remove all shavings before extraction.

About the screw extractor:

Material: HSS steel with titanium plated surface

Color: Silver

Tool holder type: Hexagon tool holder



Recommended Screw Extractor for screws and bolts with diameter measuring:



Bit Imperial Metric



#0 smaller than 3/32” (smaller than 3mm)



#1 3/32” – 3/16” (3mm-5mm)



#2 5/32” – 5/16” (4mm-8mm)



#3 3/16” – 13/32” (5mm-10mm)



#4 1/4” – 15/32” (6mm-12mm)

• 🔧【EXTENSIVE APPLICABILITY】- The bolt extractor set (＃0 /＃1 /＃2 /＃2 /＃3 /＃4) works with any drill and any size screw or bolt. Suitable for hexagon socket bolts, square head screws, wood screws, hexagon head screws, mechanical screws, sheet metal screws and other screws.Complete size easy out bolt extractor set and can meet your unique needs.
• 🔧【BEST QUALITY】- This damaged screw remover tool kit is made from high hardness H.S.S. 4341 alloy steel, durable for extracting stripped, broken, stuck or damaged screws.We have carried out strict quality inspection and control on everyone of our screw adapters before they leave the factory.Your goods is backed by our Highest Quality Promise.
• 🔧【EASY OPERATION】- Two simple steps can remove all jammed screws/bolts in a few seconds. Only one drill bit is needed, no other tools are needed. Choose a drill bit smaller than the damaged screw to easily remove the screw. In this process, make sure to turn the damaged screw counterclockwise until it is loose! Bullet Point
• 🔧【EASY TO CARRY】- Our products are packaged in a storage tool box to ensure that you will not lose one ! You can take it with you and use it for home, telecommunications, car or mechanical maintenance work.
• 🔧【RISK FREE WITH THE MONEY-BACK GUARANTEE】- Not satisfied? Return your commodity within 30 days for a full refund, no questions asked. Warranty within one year! We believe that every purchase is the belief and trust of customers, and customer satisfaction is always the most important!Our goal is for you to be 100% satisfied!!!

Product description

First of all, our product hardness is 64 HRC-65 HRC, if the damaged screw hardness is higher than that, which will make the extractor bit shear off into bolt easily. Please contact Jellas first when you decided to purchase. We will tell if this product suits or not. Another important thing is that you should be careful of the working speed of the electric drill, and should keep the speed under 200 rpm, as the bit may break for high speed use. Also you can use a wrench to extractor. The lower speed, the better, which will also help you not make the frictional locking force out of control and protect the screw extractors not breaking.

• [Technology-Leading] - Jellas 22pcs damaged screw extractor set made by HSS material can create more extraction possibilities for broken screws or bolts of different sizes (2-12mm) and can work on irregular and jagged irregular cuts; Extra gift of 2 common sizes (#3 & #6) enhances the longer service life of the product
• [Most Cost-effective] - HSS material with maximum protection against rust and corrosion, hardness can reach 64.5 HRC for strength, flexibility and durability; The notches on the extractor bits produce greater force for bolts that are difficult to remove; Aluminum box packaging, delicate and durable, can be presented as gifts to friends and relatives
• [Switching Tips Freely] - With the support of extension tips and a socket adapter, the separately designed burnishing tips and extraction tips allow for switching at will without wasting time and energy
• [Meet Any Requirement] - The extension bit holder (6.35 mm) and the socket adapter (4 mm) of the screw removal set fit all electric drills of any brand; The magnetism inside the support and the adapter prevents the tips from falling
• [Simple to Use] - The manual is included, everybody knows how to use; Separated burnishing tips (for perforation) and extraction tips simplify the working process, it is not necessary to turn the extractor upside down and rotate the drill holder again to extract

Product features

JELLAS Damaged Screw Extractor

Designed Tools seed New Stories

If you forget the pilot hole or drive a screw too quickly, a power screwdriver can spin its bit fast enough to strip away the cross or other shape in a screw. Once that’s gone, the screw can’t be driven deeper or backed out. For screws where the stripped screw head rests flush with the wood (and you don’t want to risk damage to your project), then you may need a screw extractor.

Jellas 22 pieces extractor screws to extract screws made of advanced High Speed steel (H.S.S), twice tempered for extra hardness and is up to 64-65HRC; It can extract screws from 2 to 12 mm. Our screw extractor set works with any drill and any size of screw or bolt, great for those stubborn, broken, blocked or damaged and also for simple removal of screws, Jellas Screw extractors are designed to help you with that.

Attentions

The screw extractor is to keep the frictional locking force between the #drill/#extr bits and the damaged screws under control which will take a few more times if you are a new user.

First of all, our product hardness is 64 HRC-65 HRC, if the damaged screw hardness is higher than that, which will make the extractor bit shear off into bolt easily. Please contact out seller center first when you decided to purchase. We will tell if this product suits or not. Another important thing is that you should be careful of the working speed of the electric drill, and should keep the speed under 200 rpm, as the bit may break for high speed use. Also you can use a wrench to extractor. The lower speed, the better, which will also help you not make the frictional locking force out of control and protect the screw extractors not breaking.

Instructions for Use

Drilling the Screw

Step1, It is better to use a drill rather than a screwdriver.

Step2, Please press the reverse button on the drill to prepare the electric drill for use.(Don’t need to reset the reverse button the whole process.)

Step3, Select a drill bit slightly smaller than the screw. Hold the drill bits up to the screw or fastener you need to remove. The right one will be slightly less wide than the screw head. When you find the right one, attach it to your drill.

Step 4, Line the drill bit up with the center of the screw. Place the drill bit in the divot you created earlier. Move slowly as you begin to drill. Too much force will damage the screw. Focus on holding the drill bit steady so it drills straight down into the screw head.

Step5, Drill a hole for the extractor. You will need to drill somewhere between 1⁄8 inch (3.2 mm) and 1⁄4 inch (6.4 mm) into the screw head. The depth depends on the screw extractor you have. Hold up the extractor to compare it to the hole you drilled. If the extractor doesn’t fit, keep drilling to widen the hole.

Pulling out the Screw

Step1, Insert the extractor into the drilled hole. The spiral end of the extractor goes into the hole. You can tap it with a hammer to make sure it’s in there, but don’t force it. The loose end should have a tap handle, which looks like a T, for you to hold onto. Twist the extractor counterclockwise until you can’t turn it anymore.

Step2, Twist the extractor with a wrench or drill. Grip the top of the extractor with a wrench. Continue to twist it counterclockwise until the screw pops free. Many extractors are designed to work with drills. Attach the free end of the extractor to the drill and turn on the drill to turn the screw counterclockwise. It’ll come out without much resistance.

Product description

Screw Extractor Sizes:



1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2",17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8".

• ◇ Made of heat-treated high-quality high-carbon steel (chromium-molybdenum steel)，is the ideal tool for removing broken screws, bolts, studs, fittings, threaded pipes and pins
• ◇ Size From 1/8" to 7/8" and Can be used with any hand socket or wrench
• ◇ Each surface is precision machined and resistant to corrosion. Internal left-handed spiral design for extra grip and faster tapping
• ◇ Each size with an eye-catching size mark, which quickly selects the right drill bit and meets almost all your needs
• ◇ The extractor set can be used to remove broken studs, bolts, hexagon socket screws and fittings, or it can be used with a hexagonal drill bit for a wider range of applications

• ✅【Easily Remove Broken & Stripped Screws】- This 22pcs professional screw extractor tool is made from H.S.S. 4341#, which is durable and stronger enough to covers a wide range of broken bolt heads, such as Cross, Phillips, Slot, Torx, Square, Hex, Torx.
• ✅【Premium Quality】- Titanium coating can prevent the Screw Remover from rusting effectively and we offer 4 Extra sizes (#3 #4 #5 #6)to prolong its service life. The magnetism design can prevents the tips from falling.
• ✅【Wide Compatibility】- Works with almost all drill, bolt and screw (2-12mm). Ideal for stripped screws, machine screws,lag bolts,wood screws,hex bolts,sheet metal screws. Also suitable for drill holes on SOFT materials like wood,plastic.
• ✅【Safty Comes to First】- 1.drill a pilot hole first in the stripped screw. 2.go one size up on the extractor and let the extractor to bite into. 3.use the extractor remove the screw from the hole. (please keep REVERSE drill mode, LOW speed RPM<200).
• ✅【Jellas Sincerely Service】- An essential part of every tool box and comes with a Lifetime guarantee. Superior carrry packge could be a perfect gifts for dad, husband and friends.

Product features

Everything in 1 box

Jellas 22 pieces extractor remover set can extract screws from 2 to 12 mm,works with almost all drill and any size of screw or bolt.

Premium Hardness

This updated stripped screw extractor set made of advanced High Speed steel (H.S.S), twice tempered for extra hardness and is up to 64-65 HRC.

Switching Tips Freely

The separately designed burnishing tips and extraction tips allow for switching at will without wasting time and energy.

Product description

Bosch spiral screw extractor sets feature extractors that are ideal for removing stripped screws, bolts and other fasteners. The left-hand flutes grip the metal firmly. Spiral flutes are used to remove stripped screws from harder materials (straight flutes are for removing stripped screws from softer material). made from heat-treated carbon steel, they are rust- and tarnish-resistant tools. The rolled threads are more accurate and cleaner than machined threads. They are tooled to the most exacting specifications. Laser-etched marking ensures size identification and won't wear off. They feature a precise flute design to ensure the flutes grip firmly.

• Screw extractors – used for removing stripped screws, bolts and other fasteners
• Left-hand flutes – grip the metal firmly
• Heat-treated carbon steel – provides superior durability
• Rolled threads – deliver more accuracy and are cleaner than machined threads
• Rust- and tarnish-resistant design – provides greater durability and accuracy

User questions & answers

Question:	Will this work for bolts where the heads snapped off trying to remove them? Remaining pieces are a few mm below the surface
Answer:	The BSPE6D Spiral Flute country of origin is China. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Will this work for a bolt as small as 10 mm
Answer:	I don’t believe so. I thinks it’s designed for Phillips, torx, Allen screws, etc.
Question:	Are the drill bits and extractors both left-hand? I think that is the way it is supposed to work. Double checking before purchasing
Answer:	The extractors come in different sizes and are designed to "bite" into the screw head so you can then undo the screw using the reverse action of your power drill. So if you choose the correct size extractor to fit into the head of the security screw it should have no trouble removing the screw.
Question:	Where is it made
Answer:	There is a drill end to cut the pilot hole then revers to us the tapered threaded end to extract the screw

Product features

Bosch BSPE6D 12Piece Steel Spiral Flute Screw Extractor Set

Bosch Spiral Screw Extractor Sets feature extractors that are ideal for removing stripped screws, bolts and other fasteners. The left-hand flutes grip the metal firmly. Spiral flutes are used to remove stripped screws from harder materials (straight flutes are for removing stripped screws from softer material). Made from heat-treated carbon steel, they are rust- and tarnish-resistant tools. The rolled threads are more accurate and cleaner than machined threads. They are tooled to the most exacting specifications. Laser-etched marking ensures size identification and won't wear off. They feature a precise flute design to ensure the flutes grip firmly.

Product description

Remove broken and damaged screws and bolts in two easy steps. Each of the four dual ended bits in this set feature a burnishing tip to prepare the screw or bolt for removal and a threaded tip to grip and extract them when powered with a 3/8" drill. Removes many types of screws up to 4" in length including hex, Phillips, and square drive and bolts up to 3/8". Each of the four bits are different widths to handle a different range of screw and bolt sizes. Additional Features: Bit #1 handles No. 4-No. 7 screws and No. 10 bolts (5mm) Bit #2 handles No. 8-No. 10 screws and 1/4" bolts (6mm)Bit #3 handles No. 11-No. 14 screws and 5/16" bolts (8mm)Bit #4 handles No. 16-No. 24 screws and 3/8" bolts (10mm)

Everybody knows the frustration of removing stripped screws and bolts. With the Alden 4-Piece Grabit Broken Bolt and Damaged Screw Extractors Set, you can finally get rid of that headache. It is industrial strenghth and is made from high quality tool steel. It is designed to be used in a variable reversible drill but is also effective using a 1/4 inch hex screwdriver and extracts many type fasteners including: Phillips, Slotted, Hex, Trox, Tri-Wing,Pozidriv, Fearson, most tamper resistant screws and many more.

From the Manufacturer

Pro Grabit 4 piece kit works on damaged screws and broken bolts from as small as No. 4 screw to as large as 3/8 in. bolt. Quickly and easily removes most damaged screws such as Hex, Phillips, Torx, Square Drive; sizes No.4 - 24 from wood, plastic or metal up to 3 inches in length. Two-step drill bit and extractor in one tool extracts broken bolts and damaged screws fast; use in reverse only when drilling and extracting with reversible hand held power drill. Can drill up to grade 8 or 10.9 class fasteners; extracts bolt sizes No. 10 - 3/8 in. (5mm - 10mm). Serrated extracting end of tool results in greater torque for hard to remove bolts and screws. No bolt preparation required. Professional grade multi-purpose extractors compatible with "quick-connect" chuck systems or chucked directly into drill. Good for multiple extractions with single tool.

• Two-step drill bit and extractor in one tool. Multiple tools not required.
• Self centering drill tip; no walking or wandering. No grinding, center punching required.
• Can be used in quick change chucks. Easy to use.
• Tempered twice for extra hardness. Results in multiple extractions per tool.
• Made from M2 HSS. Highest quality steel used and made in the USA.

User questions & answers

Question:	Will this be able to remove a 4mm diameter screw which the head has broken off of
Answer:	You might also want to check out the Grabit Micro kit http://www.amazon.com/Alden-4507P-Grabit-Broken-Extractor/dp/B000Q60UOO/ref=sr_1_1?ie=UTF8&qid=1403282910&sr=8-1&keywords=grabit+micro as it has the smallest screw removers made.
Question:	Need this to take the bolts out from my fender. Is this strong enough
Answer:	size of the bolt matters, pre soak with wd-40 to break down rust , try loosening first with wrench if screw under 1/4 inch these will work just fine, pre-drill and use remover head on electric drill, air drill is too strong and will strip out.
Question:	I can't figure out what grade bolts are for license plates. I have 4 of them with broken heads. Is this kit strong enough
Answer:	license plate bolts should not be any heavier than grade 4These extractors are the greatest, I removed broken steel bolts that the head had stripped out-follow the instructionsthey are amazing!!!!
Question:	will these work on 1/4" corroded stainless steel screws
Answer:	I just tried to use them to remove some 1/4-20 stainless flat head screws that were corroded into a piece of aluminum. The #2 tool, which is spec'd for 1/4" fasteners, broke with very little effort. Since the heads were big enough, I then tried to use the #4 tool, which is supposedly strong enough to remove 3/8" fasteners, and it broke too. I don't expect miracles from these tools but I do expect that they would strip the fastener head before breaking themselves. I consider this a design flaw and would not recommend them for really tough jobs.

Product description

Nothing is more frustrating than when work is brought to a halt when a screw or bolt breaks on the job. We now have a solution for you with the Rennsteig double-edged bolt extractors, which represent a new generation of tools to easily remove damaged screws and bolts. With the German quality, reusable double-edged bolt extractors that make 8 points of contact and can be used for both left and right handed threads, you can now save the day and get back to work in just 5 easy steps. First, mark the center point for your drill hole using the tip on the extractor. Second, drill a hole in the bolt. Third, drive the bolt extractor into the bore hole until the cutting edges are in full contact with the bolt. Fourth, use a wrench, pliers or socket to remove the bolt out of the thread hole. Lastly, after unscrewing, remove the damaged screw or bolt from the extractor. With multiple sizes available these screw extractors are ideal to have on hand in order to be prepared for the unexpected broken bolt or screw.

• Precision Grade Performance Tools
• The Number 1 Choice Of Tradesman Worldwide
• Comfortable In Use And Quality Assured Design
• Fit To Match The Needs In The Shop, At Home Or In The Service Field
• Each Tool Is Proven And Tested For Durability And Function In Real World Use And Conditions

User questions & answers

Question:	Will this work on 3mm screw
Answer:	Don't think so - even the #1 would have trouble with anything under about 5mm. For 3mm I would go with the Alden micro.
Question:	What size drill bit does this need to work according to description
Answer:	1/8 inch - might get away with 3/32
Question:	What is the smallest screw this extractor will remove. Also what is the smallest and largest pilot that this easy out will lock into please
Answer:	This is the information that we have available from Rennsteig on this this Screw Extractor: Fits bolts and screws sized from 3/16-inch to 1/4-inch. Drill diameter 1/8-inch to 3/16-inch, driving hex head size 1/4-inch.

Product description

Color: Silver

Screw Extractor Set of 6



Made of high-density and high-quality 4341 high-speed Steel with 63-65hrc hardness. Instructions:



➭Step 1 - First, you must make sure that the screws used are smaller than the screws you want to remove. Make sure there is enough space to drill holes of appropriate size for the screw extraction.



➭Step 2 - Start with the drill tip and drill down to create a smooth hole. Make sure the drill rotation is “forward”.



➭Step 3 - Switch the drill bit to the extraction tip. Change the Drill rotation to “reverse”. Apply a slow and constant downward pressure on the screw and move it at a low speed. The extraction tip will bite into the screw and pull out the damaged screw. It can be easily removed in just a few seconds!



Note:



Metal shavings are produced during the drilling process, remove all shavings before extraction.

About the screw extractor:

Material: HSS steel with titanium plated surface

Color: Silver

Tool holder type: Hexagon tool holder



Recommended Screw Extractor for screws and bolts with diameter measuring:



Bit Imperial Metric



#0 smaller than 3/32” (smaller than 3mm)



#1 3/32” – 3/16” (3mm-5mm)



#2 5/32” – 5/16” (4mm-8mm)



#3 3/16” – 13/32” (5mm-10mm)



#4 1/4” – 15/32” (6mm-12mm)

• 6-PIECE SCREW EXTRACTOR SET: The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws.
• HIGH QUALITY: This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.
• USER FRIENDLY: Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw.
• MODERN TOOL: Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work.
• WIDELY APPLICATION: 6 stripped screw extractors come with individual box, covers most of the screw sizes you will encounter during use, highly suitable for

Product description

With the screw extractor, you can easily remove any peeling screw in 10 seconds or less. You'll never slow down or get frustrated when a screw falls off or a bolt breaks.



With the screw extractor, you can easily remove any peeling screw in 10 seconds or less. You never slow down or get upset when a screw falls or a bolt breaks.







First, you have to make sure that the screws you use are smaller than the ones you want to remove.

The size of 6 - 10 needs to be installed in the socket adapter first, and then connected to the expansion bit bracket (other sizes can be directly connected to the expansion bit bracket)

Start slowly and drill a hole in the screw head or bolt to fit the cut size. It forms a conical hole for easy extraction.

Change to use extracted (Ex) bits of the same size.

Reverse the use of the drill bit, take out the broken drill bit, you can easily take out in a few seconds!





Specifications:

Material: high speed steel

Color: Silver



Packing list:

 20*Damaged screw extractor(Ex1 - 10, Dr1 - 10)

 1*Magnetic Extension Bit Holder

 1*Socket Adapter

• Only one drill bit is needed, no other tools are needed. Just select a smaller extractor than the damaged screw and insert the drill turnover tool - make sure to turn the damaged screw counterclockwise until it is loose!
• Our products are packaged in a storage toolbox. The damaged screw extraction device is made of high-quality high-speed steel alloy material, which is more durable for damaged screws made of steel, iron or aluminum alloy materials.
• Five sizes are used for different tools. Choose a bit smaller than the damaged screw, drill a clean hole, and rotate the thread end counter clockwise. You will take the screw off quickly.
• These screw extractors are packed in boxes, which are easy to carry and store. All the stuck screws / bolts can be removed in seconds in two simple steps.
• Screw removal tool is an ideal tool to remove peeling, damaged, embedded and rusted screws. It is suitable for hexagon socket bolts, machine screws, tension bolts, wood screws, hexagon bolts, sheet metal screws and other screws.

Product description

Ontel SpeedOut Damaged Screw Extractor & Bolt Extractor Set

• 100% Carbon Steel
• Imported
• Made of good quality products
• Product is manufactured in United States
• Select propellants that deliver consistent accuracy and performance
• Included components: Concrete Screws and Bolt

User questions & answers

Question:	Does this include the case
Answer:	Yes, it does have a case.
Question:	I have a stripped screw down inside a metal hole about an inch. Will this get that out? No idea of the size
Answer:	Maybe, but only if both sets of threads are not damaged and you can use a drill press with a vise. With damaged threads you may not be able to penetrate deeply enough into the stripped screw to be effective, which also maybe true with good threads if you are on the far side of an inch.
Question:	Will this work on #4 machine screw with no head
Answer:	yes- you do have to drill into the middle of your stripped screw - the use your speedout with a pair of pliers or a rachet handle
Question:	is there any warranty on this ? I used it once and broke off in bolt the first thing, like it was made out off glass
Answer:	CAVEAT EMPTOR. SpeedOut does ***NOT*** honor their lifetime warranty when it is not ordered directly from their website, and instead requires you to contact the Amazon.com seller for a replacement. (The Amazon seller sent me a new SpeedOut for free, at their own loss-and to their credit-without me shipping mine back to them.) Here's a transcript of my emails with SpeedOut:--------------------------------------------------------------------------------Sent: Wednesday, August 06, 2014Subject: Replacement #1 bit.Hello! My #1 bit broke. May I please receive a replacement under your lifetime warranty to the address below? I've included a copy of my receipt, below, as well as a photo, attached. Thank you! Cheers,Jonathan--------------------------------------------------------------------------------Dear Customer,Thank you for your message, Unfortunately you did not order it off this website you order it through Amazon.com. You will need to through Amazon returns process. My apologies for any inconveniences. Thank you and Have a Great Day!! Kind Regards,Redacted--------------------------------------------------------------------------------Hi Redacted,I found your contact information from SpeedOut's official website at https://www.buyspeedout.com/iispout/12.0000/SpeedOut-Customer-Service.dtm .This is unfortunate. I'll be noting this disappointing customer service experience in a public Amazon review for others to be aware of. Most companies honor their warranties regardless.Am I mistaken in that I'm dealing with SpeedOut directly? Do they not have a website? If so, this still seems misleading, as I'm not sure how to have SpeedOut honor their lifetime warranty?Thanks,Jonathan--------------------------------------------------------------------------------Dear Customer,Thank you for your message, Yes we have a lifetime warranty. You did not order directly from our website www.buyspeedout.com and instead ordered through Amazon you will have to contact Amazon to get a replacement. Thank you and Have a Great Day!! Kind Regards,Redacted

Product description

Wyvern USA Pro E-Z Out is a 5-piece, titanium plated, 4341 High-Speed Steel broken screw extractor set in a black case.



WHY TITANIUM PLATING?



4341 High-Speed Steel is already a hard metal (typically 62-63 HRC) and used in many common tools. However, screws come in a wide range of materials and hardnesses. Titanium plating increases the hardness of the steel to help the bits penetrate tough metals, stay sharper longer and resist rust and corrosion.



WHY A 5-PIECE SET?



The 5 different size bits are designed to remove all common screw sizes.



BIT SIZE     SCREW SIZE

#0             smaller than 3/32” / 3mm

#1             3/32” – 5/32” / 3-5mm

#2             5/32” – 7/32” / 4-8mm

#3             7/32” – 9/32” / 5-10mm

#4             9/32” – 3/8” / 6-14mm



HOW DO I USE IT?



Step 1: Set drill to reverse and use a slow speed at all times

Step 2: Start with the drill bit/burnishing tip and drill down 1/16th inch to create a smooth hole

Step 3: Switch the bit to the extraction tip. Using constant downward pressure on the screw and a slow speed the extraction tip will bite into the screw and extract the damaged screw.



TIPS:

*Metal shavings are created during burnishing-remove any debris before extraction

*If extractor threads don’t bite into the screw head switch back to the burnisher and

clean out more of the screw head or switch to the next largest bit size and start again with Step 2

• ✅ 5-PIECE SCREW EXTRACTOR SET - This kit includes a screw extractor bit to remove all common sizes of damaged, stripped or broken screws.
• ✅ MODERN TOOL - typically called an easy out or “EZ out”, this titanium-plated screw remover and extractor kit improves upon the traditional design with a total of 5 bit sizes and full titanium plating.
• ✅ TITANIUM PLATING - increases the hardness of each bit to help them penetrate tough metals, stay sharp longer and resist rust and corrosion.
• ✅ EASY TO USE - set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole. Switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw.
• ✅ MUST-HAVE TOOL - whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the damaged screw out and your project back on track.

User questions & answers

Question:	Does this work for star titan screw
Answer:	Yes,works well. I have used these to remove screws and studs in masonry and locks. They are adequate to do the job.
Question:	what is the length of the extractor
Answer:	They should if you extract slowly. I used my set to machine screw stripped out of door frame that worked fine ,and I loaned them to a carpenter friend, he said they were the best extractor even made.
Question:	Where is the product manufactured
Answer:	These screw extractor bits can be used on all kinds of screws with following diameters: 1# for Diameter 3~5mm 2# for Diameter 4~8mm 3# for Diameter 5~10mm 4# for Diameter 6~12mm