10 best tekton socket sets

Product description

The TEKTON 3/8 Inch Drive 6-Point Socket & Ratchet Set includes every socket from 5/16 to 3/4 inch and 8 to 19 mm with no skipped sizes. The set comes equipped with a 90-Tooth quick-release ratchet as well as a universal joint and extension, which aren’t often found in most sets. All of the tools come stored in a sturdy carrying case.

• Complete set has every size from 5/16 to 3/4 inch and 8 to 19 mm in both deep and standard lengths
• 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off
• Extra large die-stamped size marking is easy to read and can’t wear off
• Polished, chrome-plated finish is easy to clean and highly resistant to corrosion
• Finely geared 90-tooth ratchet needs only a 4-degree working swing arc
• Includes tools not found in most sets like a universal joint and extensions
• Strong, resilient storage case with built-in parts tray keeps everything organized
• Includes 3/8 in. drive 6-pt. inch sockets: 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in., 3/8 in. drive deep 6-pt. inch sockets: 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in., (12) 3/8 in. drive 6-pt. metric sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm, (12) 3/8 in. drive deep 6-pt. metric sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm, 3/8 in. drive 90-tooth quick-release ratchet: 8 in., 3/8 in. drive extension bars: 3, 6 in., universal joint: 3/8 in. drive, and storage case

Product features

Large, Stamped Markings

Roll-stamped markings are permanently impressed into the material and are clear even in low light settings.

Prevent Fastener Round-Off

Radiused corners in the socket opening apply force to a fastener's flat sides, rather than its corners.

Fully Stepped Shoulders

Narrowed diameter on smaller sizes stretches to the base of the socket, providing reach into tight, recessed areas.

Product description

From the Manufacturer

Covering a continuous range from 7 to 19mm, the 6-point TEKTON 47925 3/8 in. Drive Deep Chrome Vanadium Sockets are built for use with impact wrenches to loosen the most stubborn fasteners without stripping them.

• High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off
• Extra-deep broach accommodates longer fasteners
• High-contrast permanent laser etched size markings are easy-to-read, even in low light
• Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish
• Meets or exceeds ANSI performance standards

User questions & answers

Question:	Is this set available with a storage pouch like some of your other items
Answer:	No. Mine did not come with a storage pouch but these pliers are well worth buying.

Product features

6.25" VAMPLIERS: VT-001

• Uniquely designed concave shaped jaws with vertical and horizontal serrations on the inside jaws which make it possible to grab on to a stripped/rusted/corroded screw or rounded nut for extraction
• Will even work on screws which have special, tamper-proof, or unique heads like a Torx screw, a single-side or security screw
• Made from treated high quality carbon steel from Kobe in Japan
• Smooth varnished finish with elastomer ergonomic handle grips

7.5" VAMPLIERS: VT-001-7LN

• VAMPLIERS Long Nose Screw Extraction Pliers, Side Cutting, Professional Grade Pliers
• Top teeth inter-meshed for non-slip grip, Ergonomic elastomer handles for unmatched comfort
• Serrations in between grips used as wire pullers, RoHS compliant, Made in Japan
• Remove stripped/rusted/corroded/stuck/one-side/Torx screws, nuts and bolts
• Wire cutters hardened to HRC60±2 (Rockwell standard) to handle tough screws

8" VAMPLIERS: VT-001-8

• Combination of concave surface and horizontal serrations to maximize contact on the fastener.
• Ideal for single-sided, tamper-proof, Torx, and other unique fasteners.
• Perfect nose for access to confined spaces.
• Inner jaw, including wire cutters hardened to HRC60+/-2.
• Ergonomic elastomer handles for unmatched comfort.
• Made in Japan with hardened Kobe steel.

6.25", 7.5", 8" VAMPLIERS: VT-001-S3F

• VAMPLIERS Best Made Pliers, Premium Gift Edition Makes the Perfect Tool Gift to last a Lifetime.
• 6.25" Screw Extraction Pliers, Multipurpose Pliers for removing Stuck, Rusted Security Screws with Side cutting and twisting.
• 8" PRO Screw Extraction and Lineman's Pliers Multipurpose Side Cutting wire and Twisting
• 7.5" Long Nose Pliers to Extract damage, rusted, security screws in the most confine spaces, with fine wire cutter

TEKTON 3/8-Inch Drive Deep Impact Socket Set, Metric, 7 mm - 19 mm | 47925

Covering a continuous range from 7 to 19 mm, the 6-point TEKTON 3/8 in. Drive Deep Sockets are built for use with impact wrenches to loosen the most stubborn fasteners without stripping them.

Product description

TEKTON 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. The large, die-stamped markings are permanently impressed into the material and optimized for readability.

• Includes 19-pc. 3/8 in. drive 6-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm; 19-pc. 3/8 in. drive deep 6-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm; 1-pc. universal joint: 3/8 in. drive; 2-pc. 3/8 in. drive extensions: 3, 6 in.; 1-pc. 3/8 in. drive quick-release ratchet: 8 in.; 1-pc. storage case
• 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads
• Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
• Standard-length socket is relatively versatile and suitable for a wide range of applications
• Extra-large die-stamped size markings are easy to read and can’t wear off
• Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
• Four detent grooves provide a secure connection with the drive tool

User questions & answers

Question:	how does these sockets work with an impact
Answer:	These are thin walled and not designed for an impact wrench. I have not tried it, use at your own risk.

Product features

Large, Stamped Markings

Roll-stamped markings are permanently impressed into the material and are clear even in low light settings.

Prevent Fastener Round-Off

Radiused corners in the socket opening apply force to a fastener's flat sides, rather than its corners.

Fully Stepped Shoulders

Narrowed diameter on smaller sizes stretches to the base of the socket, providing reach into tight, recessed areas.

Product description

TEKTON 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. The large, die-stamped markings are permanently impressed into the material and optimized for readability.

• Includes (15) 3/8 in. drive 6-point sockets: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in. (15) 3/8 in. drive deep 6-point sockets: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in. (19) 3/8 in. drive 6-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm (19) 3/8 in. drive deep 6-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm universal joint: 3/8 in. drive 3/8 in. drive extensions: 3, 6 in. 3/8 in. drive quick-release ratchet: 8 in. 3/8 in. drive breaker bar: 18 in., and storage case
• Complete set has every size from 1/4 to 1 inch and 6 to 24 mm in both deep and standard lengths
• 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off
• Extra large die-stamped size marking is easy to read and can’t wear off
• Polished, chrome-plated finish is easy to clean and highly resistant to corrosion
• Finely geared 90-tooth ratchet needs only a 4-degree working swing arc
• Includes tools not found in most sets like a universal joint, breaker bar, and extensions
• Strong, resilient storage case with built-in parts tray keeps everything organized

Product features

Large, Stamped Markings

Roll-stamped markings are permanently impressed into the material and are clear even in low light settings.

Prevent Fastener Round-Off

Radiused corners in the socket opening apply force to a fastener's flat sides, rather than its corners.

Fully Stepped Shoulders

Narrowed diameter on smaller sizes stretches to the base of the socket, providing reach into tight, recessed areas.

Product description

This 34 piece Socket Set is portable and can easily be transported between work areas. This set features a removable inner tray designed to fit in most tool chests with standard height drawers. This set is part of a full storage solution under the DEWALT brand that contains other interlocking stackable sets giving a user freedom to customize and carry their tools.

• DirectTorque Technology
• Polished chrome vanadium finish
• Knurled Control ring
• Hard stamped markings

User questions & answers

Question:	How long is the shaft of the driver
Answer:	If the light is red, you need new batteries. If it is green, you may want to contact Victor. The phone number is 1-855-5Victor
Question:	I need a good set of sockets for someone that works on his motorcycle, would this be a good set for that
Answer:	The expiration date is printed on the label. If your question is how fresh is the product that was shipped, I purchased in October 2017 and the expiration date on the label was December 2018, approximately one year.
Question:	Looks like no 1/4 inch socket? Is this a mistake
Answer:	I doubt storing it in a fridge would hurt it, but the box says storage at room temperature is optimal if I'm not mistaken.
Question:	whats below the top shelf
Answer:	My eye doctor recommended this as the best. He said he likes it because the preservatives are broken down by light so they dissipate.

Product description

TEKTON 1/4 inch drive 12-point sockets are an exact fit for double hex fasteners and also work with hex and square shapes. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. The large, die-stamped markings are permanently impressed into the material and optimized for readability.

• Includes 11-pc. 1/4 in. drive 12-point inch sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in.; 11-pc. 1/4 in. drive deep 12-point inch sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in.; 13-pc. 1/4 in. drive 12-point metric sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm; 13-pc. 1/4 in. drive deep 12-point metric sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm; 1-pc. universal joint: 1/4 in. drive; 2-pc. 1/4 in. drive extensions: 3, 6 in.; 1-pc. hex bit holder: 1/4 in. drive x 1/4 in.; 1-pc. spinner handle: 1/4 in. drive x 6 in.; 1-pc. 1/4 in. drive quick-release ratchet: 8 in.; 1-pc. storage case
• 12-point opening fits double hex (12-sided), hex, and square-shaped fasteners
• Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
• Extra-large die-stamped size markings are easy to read and can’t wear off
• Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
• Four detent grooves provide a secure connection with the drive tool
• Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
• Sockets come organized in a sturdy case that features strong latches and clear, molded markings for each tool.

User questions & answers

Question:	Is the bit adapter magnetic
Answer:	I own Southeastern Plumbing, we purchase most of our supplies from Ferguson Plumbing Supplies, they are a nation wide provider of plumbing goods. We mostly purchase pro-flo 1 1/4 pop up assemblies
Question:	How long is the ratchet
Answer:	The tail piece diameter is approx. 1 1/4"
Question:	What kind of warranty comes with this
Answer:	It should
Question:	fix description it is 1/4” drive not 3/4”????? hey
Answer:	Hello and thank you for your interest in Moen products. The Moen 140780 Lavatory Drain Assembly in Chrome can be used with your faucet and any sink without an overflow. If your sink has an overflow, you can use model 131553 Push Button Drain with Overflow. If you have additional questions, please feel free to call us at 800-289-6636. Our business hours are 8:00 am – 7:00 pm Monday through Friday (EST).

Product features

Large, Stamped Markings

Roll-stamped markings are permanently impressed into the material and are clear even in low light settings.

Prevent Fastener Round-Off

Radiused corners in the socket opening apply force to a fastener's flat sides, rather than its corners.

Fully Stepped Shoulders

Narrowed diameter on smaller sizes stretches to the base of the socket, providing reach into tight, recessed areas.

Product description

TEKTON Flex-Head Ratcheting Combination Wrenches offer the speed and ease of a ratcheting box end that stays continuously engaged with fasteners, eliminating the need to re-fit after each turn. Smoothly pivoting through 180 degrees, the box end head holds any angle to slide onto fasteners. It is free to move with each stroke, allowing the wrench to navigate around obstructions along the swing path. A 6-point opening provides a sure, snug fit on hex-shaped fasteners so you can apply maximum torque without slipping off, saving aggravation and your knuckles. To prevent round-off, the box end opening contacts and applies force to the flat sides of fastener heads rather than the corners. Equipped with a 72-tooth ratchet gear that needs just 5 degrees of swing arc to reach the next tooth position, it's fast and efficient when there's not much room to move. The open end is angled 15 degrees, allowing the wrench to be flipped over with each rotation to engage the fastener twice as often when you're working in tight spaces. The set includes a Store-and-Go Keeper. This compact organizer has a folding handle that saves drawer space and nonslip grippers that lock wrenches securely in place when you're on the move.

Set Includes:

• 8 mm (# WRN57108)
• 9 mm (# WRN57109)
• 10 mm (# WRN57110)
• 11 mm (# WRN57111)
• 12 mm (# WRN57112)
• 13 mm (# WRN57113)
• 14 mm (# WRN57114)
• 15 mm (# WRN57115)
• 16 mm (# WRN57116)
• 17 mm (# WRN57117)
• 18 mm (# WRN57118)
• 19 mm (# WRN57119)
• Store and Go Wrench Keeper, red

• Includes 12-pc. flex-head ratcheting combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm; Wrench holder
• Box end head pivots 180 degrees to easily get around obstructions
• 6-point box end snugly fits hex-shaped fastener heads, gripping the flat sides, not corners, to prevent round-off
• 72-tooth ratchet gear needs only a 5-degree working swing arc
• Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces
• Includes wrench holder with space-saving folding handle and nonslip grippers to lock in wrenches

User questions & answers

Question:	How strong is the detent for the flex head, like if I was using the ratchet will it switch to the different angles easily
Answer:	There is no detent for the flex head. The friction of the hinge holds the head in place. Sometimes I have to put a hand on the flex head to hold it in place while turning the bolt. I still think these are great wrenches.
Question:	do these work well
Answer:	Yes t hey do. I do a lot on cars, tractors and other type of projects and repairs and these works very well. They are heavy duty and reliable.
Question:	What kind of warranty do these have
Answer:	In the Product Information section under Warranty & Support there is a link to request warranty information.
Question:	where are these tools made
Answer:	From what I have read I believe the materials are sourced from Taiwan and assembled in the States. Tektons newer tools are of a much higher quality and build because they are trying to get out of the lower end of the tool market and into the higher end while still keeping prices affordable.

Product description

The Sunex 2568 1/2” Drive Master Impact Socket Set includes SAE sizes from 3/8” to 1-1/2” in standard and deep lengths. This set also includes 4 impact extension and a universal joint. Each socket has been forged from Cr-Mo alloy steel, designed with radius corners, made with chamfered openings, and marked by both laser etching and roll stamping to ensure permanent socket identification. All of this ensures our sockets’ professional-level performance--conveniently stored in one heavy duty storage case. Meets ANSI Standards.

• LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
• CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
• RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
• CHAMFERED OPENING: Quickly aligns fastener to socket.
• DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
• HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
• MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.

User questions & answers

Question:	Why are the extension for metric only $7 more but the extensions with SAE are $20 more
Answer:	1.5 feet x 1.5 feet approx.
Question:	Are these thin walled? Will need to use them to remove valves from manifolds
Answer:	Seem to be very strong sockets, I don't think you could ever break one if used manually. I use them manually and with an air wrench, highly recommend. Great set.
Question:	Where do I find the serial number for warranty info
Answer:	Yes it is the shallow set.
Question:	What are the dimensions of the carrying case when closed
Answer:	14.4 x 3.5 x 6.8 inches

Product description

Built for use with impact tools, the TEKTON 4-pc. 1/2 in. Drive Impact Flip Socket Set includes the six most common sizes for lug nuts. The six-point design offers a snug fit and sure contact with the broad, flat sides of a lug nut, not just the corners, preserving its geometry and preventing round-off. Thinner walls give sockets the clearance to slide into tight recessed wells where many other impact sockets can't go. Made of forged and hardened chrome molybdenum steel, each socket has a durable black electroplated finish. Color coding allows for quick size identification.

Set Includes:



1/2-inch drive 6-point impact flip sockets:

• 17 mm by 19 mm (red)
• 13/16 in. by 3/4 in. (blue)
• 21 mm by 7/8 in. (yellow)

3-inch by 1/2-inch drive extension bar

Storage case

From the Manufacturer

Covering 6 of the most common lugnut sizes, the TEKTON 4-Piece 1/2" Drive Impact Flip socket set features professional-grade quality.

• Includes 3-pc. 1/2 in. drive impact flip sockets: 17 mm x 19 mm, 3/4 in. x 13/16 in., 21 mm x 7/8 in.; 1-pc. 1/2 in. drive impact extension bar: 3 in.; Storage case
• Drop forged, heat treated chrome molybdenum steel
• Black oxide finished extension bar
• Black electro plated finished sockets
• Color coded sockets for quick size selection

User questions & answers

Question:	What is the usable depth of each socket ? Are they as deep as the TEKTON deep impact sockets? I need at least 1-1/2" deep, maybe
Answer:	1 1/2 inch from top to center
Question:	Can someone tell me the outside diameter of the 21mm socket? I have after market wheels with a clearance of 1.1" for the lug hole
Answer:	1.14 to 1.15 inches. The other who posted 1.225 inches measured the 7/8" side of the socket.Looks like this socket is 40-50 thou bigger than your clearance available.
Question:	I was curious. if these are the thin walled sockets ? i have noticed when i go to get my tires rotated the mechanic has to use a thin walled socket
Answer:	They are thin walled sockets. I have some very tight spaces between my lug nuts and rims on two trucks I own. Normal impact sockets won't work so I ordered this TEKTON set. They work great and fit nicely on the lug nuts.
Question:	What is the flip socket? It seems that both ends have 6 point (hex). How to use it with 1/2" (square) wrenches or the 1/2" drive extension bar
Answer:	Both ends have a hex of different sizes. Two sizes, one socket. In the middle of each flip socket is a 1/2" drive tang that you slip the extension that comes with the kit into the opposite end that you need for the lug nuts. Think of it working like any other socket except there's a an extra socket sticking out.

Product features

TEKTON 4950 1/2-Inch Drive Lug Nut Service Impact Flip Socket Set

Covering the most common lug nut sizes, the TEKTON 4950 1/2-inch Drive Impact Flip Socket Set can take on almost every lug nut service project.

Heavy-Duty Construction

Built for use with impact tools, the lug nut service flip impact sockets efficiently transfer torque from impact wrench to fastener, loosening the most stubborn lug nuts. Made from high-strength chrome molybdenum steel, these impact sockets are more resistant to drive end round out than standard impact sockets, resulting in a longer useable life.

Color-coded Sizes

Each flip socket has a black electro plated finish and color-coded for fast size selection.

Storage Case

The three flip impact sockets and extension bar fit snug in the blow-molded storage case. Keep the case stored in a tool chest or carried to your job site.

Product description

TEKTON impact sockets have both a high-visibility laser marking and a permanent stamped marking that won't wear off. They're designed for use with both friction ring anvils and detent pin anvils. Precise 6-point openings provide an exact fit for hex fasteners. Each socket size meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.

• Includes 4-pc. 1/2 inch drive deep 6-point inch impact sockets: 3/4, 13/16, 7/8, 15/16 in.; 4-pc. 1/2 inch drive deep 6-point metric impact sockets: 17, 19, 21, 22 mm; 1-pc. 1/2 inch drive impact extension: 3 in.; Storage case
• Sizes are marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off
• 6-point socket openings provide an exact fit for hex fasteners
• Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners
• Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque
• High-density polyethylene case withstands common lubricants, fuels, and solvents

User questions & answers

Question:	Can this lug nut set be used on a Torque wrench
Answer:	The adapter uses tension rather than a magnet to hold the bit.
Question:	Are these impact sockets made of Chrome Moly Steel
Answer:	It's 6.6" total length, or 6" from the end of the handle to the center of the square drive, which ever spec you want to go by. It's a nice long ratchet for a 1/4" drive and works very well.
Question:	Are these thin wall or thinner then a regular impact socket
Answer:	Life time
Question:	What country was it made in
Answer:	This is a 1/4” drive set

Product features

Two Size Markings

The size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking.

Full-Length Socket Well

Not only is the socket a deep length, but the interior well also extends far into the socket, which allows better fastener engagement in more situations.

Prevents Fastener Round-Off

Radiused corners prevent fastener round-off by applying force to a fastener’s flat sides, rather than its corners.