13 best bolt removal tools

Product description

Two punches, one simple solution to the difficult to access bolt catch retaining pin. The orientation of the pin, close proximity to the receiver, distance required to safely punch a pin and the difficulty in getting the pin started makes it a real pain with standard punches. Our simple solution, a one-two punch combo specially designed to fit flush against the receiver without damaging it and long enough to reach the pin. It features a roll pin punch for removing pins and a magnetized roll pin starter punch that eliminates the need for a third hand. Smart, simple, frustration free.

• Easy access to one hard to reach pin
• 3/32" extended roll pin punch allows easy access to roll pin
• Magnetic roll pin starter holds roll pin for easy replacement
• Flat side sits tight to receiver to give access to roll pin without fear of damaging your gun

User questions & answers

Question:	What is the actual length of this bolt catch punch set
Answer:	Yes, the tines are steel. It's a very nice little rake. I use it to pick up poop in my back yard.
Question:	Where made
Answer:	There is a small screw attached to one of the parts. You will need a screwdriver to tighten.

Product features

Real Avid Bolt Catch Punch Set

Two tools, one simple solution to install difficult to access pin.

Some situations, such as dealing with bolt catch retaining pin require non-standard, but specialized solution.

Longer Than Standard Punches

Purposefully designed to handle special applications. Long enough to extend along mil-spec receivers and to comfortably use tools, eliminating risk of damaging the finish

Magnetized Roll Pin Starter

Simple tool that eliminates the need for a third hand and makes it a breeze to position a small pin in the right place.

Flat Side

Intentionally shaped to fit flush against flat surfaces such as receiver - yet another feature that protects you from causing damage.

Optimized Size Roll Pin

Included 3/32" Roll Pin Punch has optimal size for commonly used pins.

About Real Avid

Real Avid is the leader in DYI for guns. We relentlessly invent superior problem-solving products that improve the experience of cleaning, maintaining, building, modifying and repairing guns.

Check out our other specialized, innovative tools and solutions.

Product description

grip tite sockets lug nut extractor rounded bolt remover impact bolt extractor metric bolt extractor set

• High Power and impact resistance - Bolt nut remover Processed from high hardness chrome molybdenum steel, Reverse spiral flutes are designed to bite down to provide Maximum gripping power.
• Tight grip and bit - The special internal thread design provides excellent torque and can be used to rotate fasteners with deep nails. The inner non-smooth concave wall helps to grasp the stubborn nut, and the more the rotation, the tighter the grip, the easier it will not break or slip
• Surface Painting Process -These broken bolt extractors have Black oxide surface provides greater strength and durability and prevents corrosion.
• Multi-functional - The twist socket set is suitable for removing rust and wear, as well as covering the paint coating of nuts, bolts. The size:1/4”,5/16”(8mm),3/8”,10mm,7/16”(11mm),12mm,1/2”,13mm,9/16”(14mm),5/8”(16mm),17mm,11/16”,3/4”(19mm), include the 3/8 "to 1/4"hex adapter
• Premium Service - If you have any problems during using our product. Contact our Professional after-service team via email. Topec Direct after-sale Team will get in touch with you and timely solve your problems

User questions & answers

Question:	The head broke off the bolt will it grip the threads and turn them
Answer:	Yes. This item is all one piece, very sturdy. Comes in a giant box.
Question:	they are made in usa
Answer:	Thanks so much for the question - the handle is designed to be straight and should not be bent. All of us at Corona take pride in the products we make and truly want our customers to have the best experience possible, so please return the tool for an exchange or feel free to contact us, Corona Tools USA, for assistance. I have linked our website below with our contact information page. Hope this helps! We appreciate your business and look forward to serving you in the future. Thank you for shopping Corona products! http://www.coronatoolsusa.com/contact/ 800-234-2547.
Question:	will this get a wheel stud lock off
Answer:	It was a little awkward to measure, but it is approximately 52 inches long from tip of handle to where the rake is attached
Question:	What size wrench does the outside of the extrtactor tool require. From the pictures it appears 2 or 3 sizes can be used. I dont care to use channelo
Answer:	On Amazon: Flexrake 3F Shrub Rake Head Only... about $10 for just the metal rake head which will connect to any wood or metal pole. If you do your bed cleaning on your hands and knees and need just a shorter 3 foot shrub rake, Lowes sells a "childrens" garden rake -- about $7-- which is a short version of the longer handle shrub rake.

Product description

Getting stripped headed nuts and bolts out the easy way with the Eapele impact bolt remover set !

Ideal for getting rounded off flange bolts out.

Material:

Black oxidation treatment prevents corrosion.

40Cr chrome vanadium steel provides greater strength and durability.

Chrome Vanadium which is used for many different types of tools because when heat-treated it has excellent properties such as strength, toughness, and resistance to wear and fatigue.The light weight vanadium metal retains its resistance to things such as salt water, hydrochloric acid and sulfuric acid that cause erosion and oxidation.

Sizes:

17mm     19mm     21mm     22mm    26mm 

Grips & removes:

Rounded off

Painted over

Rusted tight

Damaged nuts&bolts

Recommended tools:

Ratchet Wrench

Quick Release Ratchet Wrench

Hand ratchets

Impact wrenches

Air ratchets

Flat wrench

Pliers

Adjustable wrench

Sockets

 Warranty Tape:

18 MONTHS Limited Warranty.Full Refund for Any Dissatisfaction.

• Eapele lug remove set with Easy-Out technology and a left-hand spiral design for superior gripping power to remove broken bolts, screws, and studs.The 5 pieces in this bolt extractor set will remove a stripped bolt of numerous sizes (17mm, 19mm, 21mm, 22 mm, 26 mm) with minimal effort using a 1/2 inch drive.
• High-strength 40Cr--- Each socket is made of heat-treated 40Cr vanadium steel and coated in Manganese Phosphate for industrial or mechanical use and meets or exceeds ANSI/ASME standards.
• Handy to use---To remove the bolt, simply attach the extractor to a ratchet and place over the damaged head. You can tap it on using a hammer or wrench as well. Then, simply turn the wrench to unscrew your bolt.
• Center Punch Bar---A hex top on the extractor makes it easy to use a wrench instead of a ratchet. Once removed, use the center punch to knock the bolt out of the extractor.
• Portable Case---Each spline extractor has the size etched on for quick reference. A heavy-duty carrying case is included to help ensure a longer life for your extractors.

User questions & answers

Question:	Will these work on a bolt shaft the head is broken off
Answer:	Have no idea as I live in Montana. Have used in the past for raking pine needles/cones in Montana forest.
Question:	I need a 29mm or 1-1/8” nut extractor
Answer:	You would be better off finding a stainless steel frame to prevent any food contamination. Great idea for camping to cook for many people at once but I wouldn’t use this rake.
Question:	Is this a 1/2' driven socket set
Answer:	Nope! It comes all in one piece.
Question:	Does it work on left hand threads
Answer:	The tines are straight

• ABOUT THE TOOL: This damaged bolt and stud extractor tool is 3/8-inch drive and can be used with manual or pneumatic impact wrenches and ratchets. The hexagonal flat can also be used with flat wrenches, adjustable wrenches, sockets, and locking pliers. Manufactured with high-grade Heat-Treated Alloy Steel for maximum durability, this tool also features a chrome finish for additional rust protection.
• MULTIPLE USES: This bolt extractor will save hours of frustration on broken exhaust manifolds, oil filler plugs, rounded starter bolts, low grade bolts left in saltwater, painted-over bolts, rusted tight bolts and more.
• TRADITIONAL BOLT EXTRACTORS: Traditional bolt extractors force the user to guess which size the damaged stud is. They have a tendency to strip the screw even more and shave metal off without budging the screw, leaving you worse off than when you started. The design of this bolt extractor allows you to clamp down on the damaged stud, eliminating the guess work.
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Damaged Bolt and Stud Extractor Tool, simply contact customer service for troubleshooting help, parts, replacement, or refund. Need a manual? Download it for free on our website!
• ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.

User questions & answers

Question:	Says gets tigher the more pressure you put on it. which direction? clockwise or counter? cuz the thing i need to take out comes out clockwise
Answer:	Don't know the exact weight but it's definitely heavier than a run of the mill rake. It's worth the extra weight though because in my opinion it's an excellent rake. I've used it several times to de-thatch my lawn and it works great. But maybe too heavy and firm if for just leaf raking.
Question:	will it work on a left hand thread
Answer:	Yes they are and a very good rake. Thanks, Jackie
Question:	Is there a version that can attach to smaller studs
Answer:	It's a little of both. The bar that separates the tines is steel, and the mounting plate and screws for the locking mechanism are also metal. The handle lock and the barrel that mounts it to the main handle are both hard plastic. I have a small to medium sized yard, so it suits my needs perfectly. If you have a huge yard, you might want to go with something a little larger. But in my opinion, for the size and the price this is a very well-made rake.
Question:	Can this be used with an impact wrench
Answer:	Yes, it is! I found that if I adjust it to a smaller "footprint" it handles the grass clippings very well. I leave it wider to get the tree sticks, small branches, and dog "gifts" and then make it smaller for the finer things like grass clippings and leaves.

Product features

The Right Fit for a Wide Variety of Applications

You can use this versatile 3/8-inch drive damaged bolt and stud extractor with manual or pneumatic impact wrenches and ratchets. You can also use the hexagonal flat with flat wrenches, adjustable wrenches, sockets, and locking pliers. Its compact design will help you access tight spaces where studs may be hard to reach. Whether you're working on broken exhaust manifolds, oil filler plugs, rounded starter bolts, low grade bolts left in saltwater, painted-over bolts, or rusted tight bolts, this handy tool will be the right fit every time.

Quality You Need

This damaged bolt and stud extractor is made of high-grade Heat-Treated Alloy Steel for maximum durability with a chrome finish for additional rust protection. Thanks to its universal design, this bolt extractor allows you to clamp down on the damaged studs and bolts, without having to guess the size. You'll be able to depend on this tool to work where and when you need it.

Product description

Specification:

Size:

1# Remove Diameter:4mm-6mm

2# Remove Diameter:6mm-8mm

3# Remove Diameter:8mm-11mm

4# Remove Diameter:11mm-14mm

4# Remove Diameter:14mm-18mm

6# Remove Diameter:18mm-25mm

7# Remove Diameter:25mm-35mm

8# Remove Diameter:35mm-45mm

Material:Carbon steel



How to Use:

1.First drill a hole with a power drill on the broken screw.

2.Gently tap the screw extractor into the drilled hole with a hammer.

3.Use a wrench to rotate counterclockwise to remove the broken screw.

4.Check if the broken screws are all removed.



Feature:

1. Use the electric drill with the speed changeable in the opposite direction.

2. First make sure that the workpiece is safe and will not be moved when using the extractor.

3. Select a screw extractor that is thinner than the damaged screw head. Drill a deep enough hole in the middle of the screw head with one end of the drill head.

4. Reverse the screw extractor and turn it counterclockwise into the damaged screw until the damaged screw is released.



Package Included:

8 x Damaged Screw Extractor Set

• Screw extractor size includes #1 for 1/8"-5/32" , #2 for 5/32"-3/16", #3 for 3/16"-1/4", #4 for 1/4"-5/16", #5 for 5/16"-7/16", #6 for 7/16"-9/16", 7# for9/16"-3/4", 8# for 3/4"-1" .
• Made from carbon steel and are tempered twice for extra hardness and durability. Works on wood and machine screws, as well as flat, hex, or painted over screws.
• 8-piece heavy duty steel extractor，different sizes of screw extractor to meet different needs.It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings.
• Remove Damaged Screws Bolts And Water Pipes - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes.
• Easy to Operate: In just easy steps, only need a drill, choose a smaller extractor than the damaged screw, can easily remove the screw, please ensure to run the drill in reverse during this process.

User questions & answers

Question:	Does this work with left-handed threads
Answer:	I don't believe the handle can be removed but. It is the best rate you will very buy. And the last one built like a locomotive !!!!! It's the bees knees

Product features

How to Use:

1.First drill a hole with a power drill on the broken screw.

2.Gently tap the screw extractor into the drilled hole with a hammer.

3.Use a wrench to rotate counterclockwise to remove the broken screw.

4.Check if the broken screws are all removed.

TIPS:

1. Use the electric drill with the speed changeable in the opposite direction. 2. First make sure that the workpiece is safe and will not be moved when using the extractor.

3. Select a screw extractor that is thinner than the damaged screw head. Drill a deep enough hole in the middle of the screw head with one end of the drill head.

4. Reverse the screw extractor and turn it counterclockwise into the damaged screw until the damaged screw is released.

Product description

REXBETI Bolt & Nut Remover

• Made of high hardness chrome molybdenum steel for durability
• All the bolt extractors are precision engineered to easily extract damaged bolts, nuts and screws even if they are stripped, rusted or frozen
• Tight grips and won’t let go, the internal thread design provides excellent torque, the more you turn, the tighter the socket grips
• 13 pieces 3/8 inch drive bolt & nut remover comes with 3/4"(19mm), 11/16", 17mm, 5/8"(16mm), 9/16"(14mm), 13mm, 1/2", 12mm, 7/16"(11mm), 10mm, 3/8", 5/16"(8mm), 1/4"
• Heavy duty blow molded case lets all the bolt remover stay organized

User questions & answers

Question:	How long are these nut extractors
Answer:	Dear Customer, The rake head is made of plastic. It is strong enough to deal with the raking job. SIC Customer Service Team
Question:	Will this product work on a stripped bolt with no threads on the bolt
Answer:	As described in the picture, this 22 tines rake is 21 inches wide.
Question:	Will any of these sockets work well on a 15mm nut? I see that 5/8"(16mm), 9/16"(14mm) so it seems that 15mm is a no go... Thanks
Answer:	Dear customer, Please find below product dimensions, best regards. Product Dimensions: 2.5 x 22.5 x 66.2 inches Item Weight: 3.4 pounds
Question:	where are they made
Answer:	It is a heavy rake, with a fat handle. It will tire your arms out and give you a good workout, but it sure is goid for thatch raking.

Product features

Superior Connection

Made of high hardness chrome molybdenum steel for superior durability, all the extractors have special thread designed to bite into a rounded bolt head for amazing grip power on even painted or rusted nut

Standard 3/8 Inch Drive

Not only can you use the extractors on hand tools, you can easily use them with any 3/8 inch air or power tools

Hard Case for Storage

Heavy duty blow molded case keeps all the bolt removers in place

Product description

Astro pneumatics' 78825 master front wheel drive bearing adapter kit includes a heavy duty grade 8 drive bolt, making this the most durable kit of its kind. Replace wheel bearings without the need for alignment after by keeping the strut assembly and steering knuckle in place during service.

• Includes heavy duty 7/8" grade 8 drive bolt for twice the durability of the industry standard
• Replace wheel bearings without the need for alignment after by keeping the strut assembly and steering knuckle in place during service
• Master set for a wide range of applications
• Black phosphate coating for a more durable finish
• 25 piece set including detailed use instructions

User questions & answers

Question:	Is this tool made for use with pneumatic impact tools or hand tools only
Answer:	yes
Question:	What's warranty on this set
Answer:	yes, my wife and myself or in our 70's and its great!
Question:	Can this kit be used for removing and installing large lower control arm bushings
Answer:	I will measure it later today.
Question:	if i used these cups/discs on a hydraulic press, would they crack
Answer:	What warranty, it's a rake. A pretty good one, too.

Product description

For CAN AM OUTLANDER/ RENEGADE/ COMMANDER BELT REMOVAL TOOL.



A MUST HAVE FOR BELT/TRANSMISSION SERVICE.







Installation:



THIS BOLT WINDS CLOCKWISE INTO THE ONLY THREADED INSERT ON THE SECONDARY/DRIVEN CLUTCH TO SPREAD APART THE SHEAVES WHILE COMPRESSING THE SPRING FOR EASE OF BELT REMOVAL,



THEN JUST WIND OUT COUNTER CLOCKWISE AFTER BELT IS RE-INSTALLED AS YOU TURN THE SECONDARY/DRIVEN CLUTCH CLOCKWISE FOR INSTALLATION OF THE BELT.



BE SURE TO KEEP BELT IN THE CORRECT ROTATION DIRECTION ( IT WILL BE MARKED).







These 70mm bolts are the PERFECT length (Opens Clutch COMPLETELY but WILL NOT ALLOW OVER THREAD in and Over Stress Clutch Springs).



I have used these bolts for my own Can Am ATV clutches and they work perfectly to install a new drive belt

• Features: 12.9 CL , Pre oil , Fully threaded
• Size: M8x1.25x70 Bolt
• Used to open the secondary clutch for many Can-am ATV's & SXS's
• Will not work with the factory X3 spreader they use a larger bolt.
• These 70mm bolts are the PERFECT length (Opens Clutch COMPLETELY but WILL NOT ALLOW OVER THREAD in and Over Stress Clutch Springs)

User questions & answers

Question:	for ATV Odes 800cc
Answer:	I measure 43"
Question:	Are these sold individually or in pairs
Answer:	I had the same question but ordered anyway, I am 64" tall, and it suits me very well, happy with my purchase
Question:	Will this work on a Can-am Defender max xt hd
Answer:	At the top of the tine fan there is a yellow lever. Just pull the lever and slide the rake head as you want. Then flip the lever back to lock the position. Hope this will help.
Question:	Will it work for a 2011 Canam Commander
Answer:	Yes. it's a perfect garden rake for leaves. It will collect leaves efficiently without hurting your plants or lawns.

Product description

Color:Blue-13pcs 

Getting stripped headed nuts and bolts out the easy way with the HAUIDU impact bolt remover set ! 

Ideal for getting rounded off flange bolts out. 

Material: 

Black oxidation treatment prevents corrosion. 

40Cr chrome vanadium steel provides greater strength and durability. 

Chrome Vanadium which is used for many different types of tools because when heat-treated it has excellent properties such as strength, toughness, and resistance to wear and fatigue.The light weight vanadium metal retains its resistance to things such as salt water, hydrochloric acid and sulfuric acid that cause erosion and oxidation. 

Sizes: 

1/4"     5/16"(8mm)     3/8"     10mm     7/16"(11mm)    12mm   1/2"    13mm    9/16"(14mm)     5/8"(16mm)     17mm    11/16"    3/4"(19mm) 

Grips & removes: 

Rounded off 

Painted over 

Rusted tight 

Damaged nuts&bolts 

Recommended tools: 

3/8-Inch square drive 

Ratchet Wrench 

Quick Release Ratchet Wrench 

Hand ratchets 

Impact wrenches 

Air ratchets 

Flat wrench 

Pliers 

Adjustable wrench 

Sockets 

Case Size: 6.77'' x 3.11'' x 1.37''  

Drive Size: 3/8 inch.  

Packing List:  

13PCS x Damaged Bolt &Nut Sockets  

1PC x Toolbox 

 

• [MAXIMUM GRIPPING POWER] reverse spiral flutes are designed to bite down.The spiral flute cutting edge design provides a reverse grip for maximum power. Just pick and fit the right size, tap sharply with a heavy hammer to set the bite, then give it a strong until it rotated off!
• [40Cr CHROME VANADIUM STEEL ] is tougher than tool steel,ensuring longer life and greater durability.
• [METRIC & SAE SIZES]1/4", 5/16"(8mm), 3/8", 10mm, 7/16"(11mm), 12mm, 1/2", 13mm, 9/16"(14mm), 5/8"(16mm), 17mm, 11/16", 3/4"(19mm).
• [WORKS WITH MOST TOOLS ]With a 3/8” square drive for use with hand ratchets, impact wrenches & air ratchets; hexagonal flats for use with flat wrench, pliers,adjustable wrench, sockets. This damaged nut bolt remover with corrosion protection are designed for the removal of damaged bolts, screws and nuts.
• [UNIVERSAL DESIGN ]Spiral cut teeth provide positive grip, remove circular or damaged bolts. Can be driven with a metric spanner or socket. Also be used on screw heads and studs.

• ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
• PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
• UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
• CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
• ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.

Product features

Part Dimensions

A __ Receiving Tube (2-1/4" L x 2.723" I.D. x 3" O.D.)

B __ Receiving Tube (1-3/4" L x 2-1/4" I.D. x 2-1/2" O.D.)

C __ Receiving Tube (1-3/4" L x 1-3/4" I.D. x 2" O.D.)

D __ Removal Adapter (1.148" L x 1/2" I.D. x 3" O.D.)

E __ Installation Adapter (1.122" L x 0.941" I.D. x 3" O.D.)

F __ Screw

G __ Install Cup Adapter (0.845" L x 1.879" I.D. x 2-1/4" O.D.)

H __ Forcing-screw Press

I __ Receiving Cup (2-1/2" L x 2" I.D. x 2-1/4" O.D.)

J __ Installing Cup (3.676" L x 1-3/4" I.D. x 2" O.D.)

Product description

This clutch puller fits for EzGo 4 CYCLE 1994 & Newer, for E-Z GO 2 cycle 1971 - 1993

• This Primary Clutch Puller is made of high tensile strength steel, help u to removes your primary clutch easily.
• Note: Please make sure the clutch on your cart is original part, this puller will not work on a comet 94C or any other aftermarket clutch.
• This primary clutch puller will not work on the RXV or TXT models.
• Package Includes: 1 Primary Clutch Puller

Product description

Features and Benefits: Brass Head is non-sparking for use near combustible materials and non-marring to reduce work damage. Patented Unbreakable Handle Technology - Steel core eliminates breaking during overstrikes. Safety Plate prevents head from dislodging. Anti-Vibe Neck with tapered design eliminates vibration from striking. No-Slip Grip made from vulcanized rubber ensures a secure hold. At Wilton, we are on a never-ending journey to create the highest quality, most indestructible tools on the market. On this journey we've managed to design and file patents for the world's most durable splitting maul with Unbreakable Technology, revolutionary design, and engineered no-slip rubber grip. With the Wilton BASH backed by our $1,000 Guarantee, we put our money where our mouth is.

• VW & Audi Head Bolt Tool

User questions & answers

Question:	I want to tighten the door hinge bolt for a 2015 vw tiguan. I belive the bolt number is N91203801. Will this tool work
Answer:	Made in China.
Question:	Will it work on 2013 A4 2.0l
Answer:	An inch approx
Question:	It says, "warranty, parts:parts". what does that mean? 30 day warrany? 10 years? lifetime
Answer:	The tines are METAL
Question:	Will this work with a 1.8T 2000 Beetle
Answer:	Grasp the top of the rake with one hand and the top of the rake tines with the other, twist counter clockwise to unlock and extend handle. Turn clockwise to lock into place.

Product description

Powerbuilt Zeon hex bit sockets are designed to grip and turn damaged and rounded hex head fasteners. The patented design will grip and turn hex surfaces up to 85% rounded.

In other words, if you’ve got a hex head bolt or cap screw bolt that's too damaged to turn with a regular hex bit socket or hex key wrench, these bit sockets will get you out of a fix. And they work just as well on new, undamaged fasteners.

The secret is the patented Zeon design - the more you turn them the harder they grab and hold damaged hex heads. They're constructed of hardened Chromoly steel for maximum strength and durability.

-Includes Zeon metric hex bit sockets: 3, 4, 5, 6, 7, 8, 9 and 10mm

-Zeon hex bit sockets grab and turn fasteners that are up to 85% rounded

-Works great on new fasteners too, without damaging them

-Heat-treated for extra hardness and bite

-Includes socket storage rail

-Meets or exceeds ANSI standards

-Lifetime warranty

• REMOVES DAMAGED BOLTS: Damaged, rusted and up to 85% rounded hex head bolts are no match for Zeon hex bit sockets
• WORKS ON NEW BOLTS TOO: The Zeon design won't damage new hex head bolts, so you can use them like regular bit sockets
• TOP QUALITY: Chrome vanadium sockets with hardened S-2 Chromoly bits meet or exceed ANSI standards
• CONVENIENT: Includes a handy socket rail to keep your Zeon sockets organized and ready for use
• DURABLE: Built to last and protected by a lifetime factory warranty

User questions & answers

Question:	Is this set metric or sae
Answer:	I can say in most cases yes. I would assume you are asking for a wheel bolt/stud that is stripped. Some of the wheel bolts have a cheap aluminum cover on them. The real stud is underneath. So make sure you know which one your working with. These have very sharp teeth so they might break the cheap cover which is ok. But then you will down to the real bolt. But either way you will be good to go. You may have to hammer these bolt removers on to get a good grip. Once it is on it has a great lock on it. Just be prepared to replace the wheel stud and have it read before you start your project.
Question:	My set came with 2 #5s and no #3 can I fix this
Answer:	Dear customer, You only need to use a 3/8" size wrench. If you have any problems during use, please contact us.
Question:	Is there a meteic set
Answer:	The punches are 130mm / 5-1/8" long

Product features

ZEON SOCKET

Powerbuilt Zeon sockets are designed to grip and turn damaged and rounded nuts and bolts. The patented design will grip and turn hex heads up to 85% rounded. And they work just as well on new nuts and bolts.

In other words, if you’ve got a bolt that you can’t turn or a nut with rounded corners, we have the help you need.

The secret is the patented Zeon socket design - the more you turn them the harder they grab and hold damaged hex heads. Zeon sockets are heat-treated to hardness HRC 38-56 for maximum strength and durability.

ZEON HEX KEY and BIT SOCKET

Powerbuilt Zeon hex bit sockets and hex key are designed to grip and turn damaged and rounded hex head fasteners. The patented design will grip and turn hex surfaces up to 85% rounded. And they work just as well on new fasteners.

If you’ve got a hex head bolt or cap screw bolt that's too damaged to turn with a regular hex bit socket or hex key wrench that you can’t turn or a nut with rounded corners, we have the help you need.

The secret is the patented Zeon bit socket design - the more you turn them the harder they grab and hold damaged hex heads. Zeon bit sockets are constructed of hardened S-2 Chromoly steel for maximum strength and durability.

ZEON LUG NUT SOCKET

Powerbuilt Zeon lug nut sockets are designed to grip and turn damaged and rounded wheel lug nuts. The patented design will grip and turn lug nuts up to 85% rounded. And they work just as well on new lug nuts.

In other words, if you’ve got a lug nut that you can’t turn, we have the help you need.

The secret is the patented Zeon socket design - the more you turn them the harder they grab and hold damaged hex heads. Zeon lug nut sockets are constructed of premium impact-rated Chromoly steel for unmatched strength and durability. They won't scratch your high-end wheels though, thanks to the included protective plastic wheel saver sleeves.