11 best wera screwdriver sets

Product description

Wera 33 Piece Kraftform Kompakt 62 is designed for the Professional User. Kraftform Kompakt sets include Kraftform bitholding Screwdriver and long bits that can be quickly changed without the use of special tools. Wera’s Kraftform bitholder features the Rapidaptor with quick-release chuck that allows for speedy one-handed bit insertion and removal for insert and power bits. All Wera hand tools feature the ergonomic Kraftform handle that fits the shape to the hand for the ultimate in comfort and high-speed torque transfer. Limited Life Time Warranty. Set contains Kraftform bitholding Screwdriver, 32 - 3 ½-inch bits, 1 Slotted - 5/16”; 6 Hex-Plus BO (Bore-hole) bits - 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm; 3 Phillips bits - PH1, PH2, PH3; 3 Pozidriv - PZ1, PZ2, PZ3; 3 Spanner bits - 4, 6, 8, 10; 8 TORX BO (Bore-hole) - TX8 BO, TX10 BO, TX15 BO, TX20 BO, TX25 BO, TX27 BO, TX30 BO, TX40 BO; 3 TORQ-SET MPLUS bits - 6mm, 8mm, 10mm; 3 TRI-WING bits - 1, 2, 3, 4. Includes durable pouch for transport and storage.

From the Manufacturer

Wera 33 Piece Kraftform Kompakt 62 is designed for the Professional User. Kraftform Kompakt sets include Kraftform bitholding Screwdriver and long bits that can be quickly changed without the use of special tools. Wera’s Kraftform bitholder features the Rapidaptor with quick-release chuck that allows for speedy one-handed bit insertion and removal for insert and power bits. All Wera hand tools feature the ergonomic Kraftform handle that fits the shape to the hand for the ultimate in comfort and high-speed torque transfer. Limited Life Time Warranty. Set contains Kraftform bitholding Screwdriver, 32 - 3 ½-inch bits, 1 Slotted - 5/16”; 6 Hex-Plus BO (Bore-hole) bits - 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm; 3 Phillips bits - PH1, PH2, PH3; 3 Pozidriv - PZ1, PZ2, PZ3; 3 Spanner bits - 4, 6, 8, 10; 8 TORX BO (Bore-hole) - TX8 BO, TX10 BO, TX15 BO, TX20 BO, TX25 BO, TX27 BO, TX30 BO, TX40 BO; 3 TORQ-SET MPLUS bits - 6mm, 8mm, 10mm; 3 TRI-WING bits - 1, 2, 3, 4. Includes durable pouch for transport and storage.

• Includes Kraftform bitholding Screwdriver with Rapidaptor, 3 ½-inch long bits, and pouch for convenient transport and storage
• Kraftform handle and interchangeable blade system permits rapid blade changes without the need of special tools
• Features Rapidaptor bitholder with quick-release chuck for rapid one-handed bit changes for insert and power bits
• Multi-component Kraftform handle fits the shape to the hand for quick and effortless working
• Limited Lifetime Warranty, German Engineered
• Includes Kraftform bitholding Screwdriver with Rapidaptor, 3 ½-inch long bits, and pouch for convenient transport and storage
• Kraftform handle and interchangeable blade system permits rapid blade changes without the need of special tools

User questions & answers

Question:	Can it hold any kind of power bits
Answer:	it holds 1/4" hex bits.... BTW, I love this set!!!! it has all the security bits i have needed so far and the bits are high quality as is the driver handle.
Question:	are they magnetic bits
Answer:	all you have to do is buy a magnetic device from ie home depot and magnetize the bit to your hearts content https://www.amazon.com/Precision-Demagnetizer-Magnetizer-Screwdrivers-Construction/dp/B07GH337X8/ref=sr_1_21?dchild=1&keywords=bit+magntizing+block&qid=1595182635&sr=8-21
Question:	Where is this screwdriver made? Thanks
Answer:	Germany... Best screwdrivers I have ever owned... Wish I had a set for home.
Question:	Will this set make it through TSA carry on
Answer:	From experience with carting these around for a while , they will make it through most of the time. Mine were confiscated after a TSA goon assembled the bits and the handle and discovered they were over the length limit of 7"

Product features

Wera Kraftform Kompakt 62 Bitholding Screwdriver and Pouch Set

• Pouch with 89mm-long bits.
• Kraftform holder with Rapidaptor quick release chuck.
• Rapidaptor quick-release chuck allows rapid bit change.
• Tough viscous bits for universal use.
• Suitable for manual and power tool operations.

Handle/Interchangeable Blade System

Handle/Interchangeable Blade System allows rapid exchange of blades required for a wide range of applications.

Pouch with 89-mm long bits. Includes 816 R Kraftform holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Suitable for manual and power tool operations; 33-piece.

Manual and Power Tool Operations

The sets comes with a Kraftform handle, quick release chuck and bits for manual and power tool operations.

Product description

• Features Lasertip Slotted and Phillips drive tips and rack
• Each screwdriver is tested at 10,000 volts in a water bath to guarantee safe working standards of 1000 Volts
• Lasertip micro-rough drive tip bites into the fastener to ensure a perfect fit and reduce cam-out effect
• Multi-component Kraftform handle fits the shape to the hand for the ultimate in comfort and high speed torque transfer
• Limited Lifetime Warranty, German Engineered

User questions & answers

Question:	are these metric or SAE
Answer:	I think they are German made, however they are one of the better quality products available. The tips take a lot of wearing. I have used other products like CK. These are better. Good luck
Question:	What is overall length
Answer:	The red part is a durable plastic. It is not brittle. It stands up to abuse very well. The yellow part is softer. Feels like a hard rubber and offers a good grip.These are good quality tools. I use them professionally as an electrician and prefer them to most others I've used.
Question:	Were are these made
Answer:	My screwdriver tips are still magnetized 1.5 year later
Question:	is the insulation sleeve plastic or rubber
Answer:	If you store your tools in a chest, pouch, etc. with other tools that may have some metal dust or other particles it could cause unnecessary wear and tear on your tips should they attract these particles and you then drive a screw. Nobody likes to be constantly stripping off particles from their screwdriver tips. Also you may want to keep them from picking up screws, nails and other types of anchors in an environment that may be full of them.

Product features

Wera Kraftform Plus 160i/6 Insulated Professional Screwdriver Set, 6-Piece

Individual testing in a water bath at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites itself into the screw head and prevents any slipping. 'Take it easy' Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including a rack for storage.

Product description

Wera Kraftform 6 Piece Screwdriver set is designed for the Professional user. Lasertip micro-rough drive tip bites into the fastener to ensure a perfect fit and reduce cam-out effect. All Wera hand tools feature the trademarked ergonomic Kraftform handle, with hard and soft zones, that fits the shape to the hand for the ultimate in comfort and high-speed torque transfer. Handle marking on top of handle includes screw symbol and size of tip to easily find the right screwdriver in your toolbox or workplace. Anti-roll protection at base of handle stops screwdrivers from rolling away at workplace. Limited Life Time Warranty. Set contains 4 Slotted - 1/8” (no Lasertip), 5/32”, 7/32”, 1/4” and 2 Phillips - PH1, PH2. Includes wall-mounting rack for convenient storage and tool retrieval. Wera – The Best Tools For The Job!

From the Manufacturer

• Features Lasertip Slotted and Phillips drive tips and rack
• Lasertip micro-rough drive tip bites into the fastener to ensure a perfect fit and reduce cam-out effect
• Multi-component Kraftform handle fits the shape to the hand for the ultimate in comfort and high speed torque transfer
• Handle markings include screw symbol and size of tip to easily find the right tool
• Limited Lifetime Warranty, German Engineered
• Features Lasertip Slotted and Phillips drive tips and rack
• Lasertip micro-rough drive tip bites into the fastener to ensure a perfect fit and reduce cam-out effect

User questions & answers

Question:	Is there a finer set of screwdrivers made anywhere
Answer:	only metric was made. Imperial parts may be purchased separately. There is a non Red Bull set available in imperial. The whole Red Bull special series is now out of production.
Question:	where are they made
Answer:	The bits and sockets in the Red Bull Tool-Check Plus are not stainless.
Question:	Anyone have multiyear experience in a humid southern climate? Will the soft part of the handle material deteriorate, leach plasticizer, or get tacky
Answer:	I don't know if the weather effects it or not. My grandsons, 12 and 13, love it. They both play ice hockey, so I don't know how much they play in the winter. They live on Long Island.
Question:	What is the difference between the two sizes, is one metric? Which is which
Answer:	the unit turns off by a power button that will extend down the pole Thanks

Product features

Screwdriver Set and Rack

6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping. More torque can be transferred with the help of an open-end or ring spanner applied to the hexagonal blade and the integrated bolster.

Advantages of Torque:

Product description

GEARWRENCH screwdrivers are ergonomically designed to fit your hand while on the job. The tri lobe handle shape provides the best performance with the least amount of effort. The dual material of the handle is oil and solvent resistant. The tips have a black Oxide, non slip coating. The part numbers and sizes are laser etched on the blade.

From the Manufacturer

Gear wrench 20-Piece master screwdriver set consisting of: 80012 1/4 x 1-1/2-Inch slotted screwdriver, 80018 3/16 x 6-Inch slotted with cabinet tip, 80013 1/4 x 4-Inch slotted screwdriver with hex bolster, 80014 1/4 x 6-Inch slotted screwdriver with hex bolster, 80023 5/16 x 6-Inch slotted screwdriver with hex bolster, 80022 3/8 x 8-Inch slotted screwdriver with hex bolster, 80000 no.0 x 2-1/2-Inch Phillips screwdriver, 80001 no.1 x 3-Inch Phillips screwdriver, 80004 no.2 x 1-1/2-Inch Phillips screwdriver, 80007 no.2 x 4-Inch Phillips with hex bolster, 80011 no.3 x 6-Inch Phillips with hex bolster, 80034 1.5 x 60 millimeter slotted screwdriver, 80035 2.0 x 60 millimeter slotted screwdriver, 80036 2.5 x 60 millimeter slotted screwdriver, 80031 no.00 x 60 millimeter Phillips screwdriver, 80032 no.0X 60 millimeter Phillips screwdriver, 80033 no.1 x 60 millimeter Phillips screwdriver, 80025 T15, 3/16 x 4-Inch Torx screwdriver, 80026 T20, 3/16 x 4-Inch torx screwdriver. Gear wrench tri-lobe ergonomic handle to obtain optimal balance of strength and comfort with speed zone for turning in lower torque applications. Chrome vanadium steel shaft has size laser etched with part number and size provides for additional strength and rust resistant finish. Black oxide, non-slip tip.

• Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency
• “Speed Zone” handle design for faster rotation in low-torque applications
• Dual material handle offers a more comfortable grip and higher performance
• Non-Slip black oxide tip for more secure fit in fastener
• Blades laser etched with part number and size for quick identification
• Oil and solvent resistant handle provides a longer tool life
• Full polish alloy steel screwdriver shaft prevents rust and corrosion
• Meets or exceeds ASME standards for performance and quality

User questions & answers

Question:	Do these have identification on the top of the handle so you can see what you're grabbing from a tool belt or bucket
Answer:	NO... nothing on the handle to indicate size
Question:	whats the size of the plastic molded tray, says 20in below is that the box it comes in or the tray? thanks
Answer:	The tray is 14" by 14 3/8"
Question:	Do they strip out inside the handle
Answer:	They are an ok screwdriver for small jobs around the house but not dependable for industrial type use . The heads of the screwdrivers strip out easily . They are not worth the value you pay for them
Question:	Does this set carry a lifetime gauarantee
Answer:	Yes

Product features

Speed

Quickly back off or run down screws using the 'Speed Zone' for fast turning in low torque applications.

Performance

The GEARWRENCH dual material, tri-lobe ergonomic handle provides the optimal balance of strength and comfort for improved performance.

Access

The black oxide non-slip tip on the GEARWRENCH screwdrivers provide the user with better access making constant contact with fasteners.

Phillips Screwdrivers

Included sizes:

#0 x 2-1/2"

#1 x 3"

#1 x 6"

#2 x 1-1/2" (not pictured)

#2 x 4"

#3 x 6"

Slotted Screwdrivers

Included sizes:

3/16" x 6"

1/4" x 1-1/2" (not pictured)

1/4" x 4"

1/4" x 6"

5/16" x 6"

3/8' x 8"

Torx Screwdrivers

Included sizes:

T15 x 4"

T20 x 4"

Mini Screwdrivers

Included Phillips sizes:

#00 x 60mm

#0 x 60mm

#1 x 60mm

Included Slotted sizes:

1.5mm x 60mm

2.0mm x 60mm

2.5mm x 60mm

Product description

Wera Kraftform 6 Piece Chiseldriver Screwdriver set is designed with a pound-thru blade for hammering. Precision manufactured extra hard pound-thru hexagon blade facilitates zero-loss transfer of forces when struck with hammer and prevents splintering of handle or blade. Integrated impact cap extends service life and makes contact with screwdriver vibration free. Hexagon bolster provides extra torque transfer with use of open-jawed or ring spanner. All Wera hand tools feature the trademarked ergonomic Kraftform handle, with hard and soft zones, that fits the shape to the hand for the ultimate in comfort and high-speed torque transfer. Anti-roll protection at base of handle stops screwdrivers from rolling away at the workplace. Limited Life Time Warranty. Set contains 4 Slotted - 9/64”, 5/32”, 7/32”, 9/32” and 2 Phillips - Ph1, PH2. Includes wall-mounting rack for convenient storage and tool retrieval. Wera – The Best Tools For The Job!

From the Manufacturer

• Features Slotted and Phillips drive tips with pound-thru blade and rack
• Extra tough Pound-thru blade is designed to withstand hammering, preventing splintering of screwdriver handle or blade
• Impact cap transfers full force of hammer and eliminates vibration
• Multi-component Kraftform handle fits the shape to the hand for the ultimate in comfort and high speed torque transfer
• Limited Lifetime Warranty, German Engineered
• Features Slotted and Phillips drive tips with pound-thru blade and rack
• Extra tough Pound-thru blade is designed to withstand hammering, preventing splintering of screwdriver handle or blade

User questions & answers

Question:	Are they magnetic tips
Answer:	Just checked all of mine..none of the flatheads had any magnetic pull..two of the phillips did..more than likely from resting close to something magnetic in my bag...so no
Question:	Are the tips hard? that's my biggest problem with screwdrivers. soft tips that round off and cam out. i need and willing to pay for quality
Answer:	They are hardened to reduce the wear. These are about as good as you will find without jumping to Snap-on or Cornwell tools. I use these in my woodshop and have never had a problem.
Question:	Is there a metric version of this screwdriver set
Answer:	This is PH and slotted. There are no hex drivers or anything that would differentiate metric and imperial.
Question:	Are these good for basic household use? I'm concerned that they are metric in the mfg chart. I'm also looking atvthe Green handle lasertip set
Answer:	Yes, this is an outstanding set for household use. The tip widths are given in metric sizing (mm), but the screwdrivers themselves are not metric.

Product features

Wera Kraftform Plus Screwdriver Set and Rack, 6-Pieces

Wera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for enhanced service life and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace and handle markings make for simplified finding and sorting of the tool.

Product description

Wera Kraftform 6 Piece Insulated Screwdriver set is designed for the Professional user. Each screwdriver is put through vigorous testing in a water bath at 10,000 volts to guarantee safe working standards of 1,000 Volts. Lasertip micro-rough drive tip bites into the fastener to ensure a perfect fit and reduce cam-out effect. All Wera hand tools feature the trademarked ergonomic Kraftform handle, with hard and soft zones, that fits the shape to the hand for the ultimate in comfort and high-speed torque transfer. Handle marking on top of handle includes screw symbol and size of tip to easily find the right screwdriver in your toolbox or workplace. Anti-roll protection at base of handle stops screwdrivers from rolling away at workplace. Limited Life Time Warranty. Set contains 2 Slotted screwdrivers - 0.6x3.5x100, 1x5.5x125. 2 Phillips screwdrivers - PH1, PH2. 2 Square screwdrivers - #1, #2. Includes wall-mounting rack for convenient storage and tool retrieval. Wera – The Best Tools For The Job!

From the Manufacturer

• Features Lasertip Slotted and Phillips drive tips and rack
• Each screwdriver is tested at 10,000 volts in a water bath to guarantee safe working standards of 1000 Volts
• Lasertip micro-rough drive tip bites into the fastener to ensure a perfect fit and reduce cam-out effect
• Multi-component Kraftform handle fits the shape to the hand for the ultimate in comfort and high speed torque transfer
• Limited Lifetime Warranty, German Engineered
• Features Lasertip Slotted and Phillips drive tips and rack
• Each screwdriver is tested at 10,000 volts in a water bath to guarantee safe working standards of 1000 Volts

User questions & answers

Question:	wherre are they made
Answer:	They're made in Europe, Germany I believe. I'm an electrician and have never had lighter, stronger screwdrivers that never strip the head. I've pried off manhole covers with the biggest slot and it didn't even bend it. Buy them and you'll see!
Question:	Does this set come with square tips
Answer:	Good question! YES - 2 Square screwdrivers - #1, #2.The set also contains: 2 Slotted screwdrivers - 0.6x3.5x100, 1x5.5x125. 2 Phillips screwdrivers - PH1, PH2. Includes wall-mounting rack for convenient storage and tool retrieval. --- . Hope this helps. We have the set in stock.
Question:	Do these have any type of safety standards marking
Answer:	They do, yes. The double triangle, 1000V, VDE, GS and C logos plus the year the screwdriver was manufactured are shown on the handle. The double triangle, 1000V, VDE-GS and C logos plus IEC 60900 are stamped in the insulation on the screwdriver blade.
Question:	On the package I've received, the #1 Square is red color rather than green as shown in the picture. Why
Answer:	Square/Robertson head screwdrivers are color coded. #1 should be green. Red is reserved for the #2 size. If the screwdriver is sized correctly and the handle is stamped correctly, this is likely an error that occurred in the manufacturing process. I double checked our current stock and all #1 square screwdrivers are green as they should be.

Product description

Wera Stainless 3334 Lasertip Slotted/Phillips/Square Screwdriver Set - 12 PiecesSlotted: 0.5 x 3.0 x 80mm* Slotted: 0.6 x 3.5 x 100mm Slotted: 0.8 x 4.0 x 100mm Slotted: 1.0 x 5.5 x 125mm Slotted: 1.2 x 6.5 x 150mm Slotted: 1.2 x 8.0 x 175mm Phillips: #0 x 60mm Phillips: #1 x 80mm Phillips: #2 x 100mm Phillips: #3 x 150mm Square: #1 x 80mm Square: #2 x 100mm * Without Lasertip Wera's stainless steel is vacuum ice-hardened, giving them the hardness and strength necessary for any industrial application. Stainless steel looks great when it's done right. Sometimes people forget to use stainless tools to install the screws, and particles are left behind causing what's known as extraneous rust. Multi-component Kraftform handle with hard and soft zones, fits the shape to the hand for the ultimate in comfort and high speed torque transfer. The end of the handle is labeled to quickly identify different sizes. The handle is also built so that the screwdriver won't roll away on a graded surface. The Lasertip is designed to "bite" into the screws, helping prevent unwanted cam-out. Manufacturer Part #: 05347903001

User questions & answers

Question:	Do they come in case
Answer:	Unfortunately, they do not. The set will come loose in a plain white box.
Question:	What kind of stainless steel alloy are these made from
Answer:	The only description Wera gives is "Edelstahl Rost Frei" which is just a quality standard in Germany for rust free alloys, and "INOX vacuum ice-hardened" stainless. I have read elsewhere that they use 1.4571 INOX, which is 316Ti alloy. In any case, I'd bet it's one of the 316 alloys. I have been very impressed with the quality of the screwdrivers.
Question:	Do they have a lifetime warranty
Answer:	Yes, these drivers are backed by a lifetime warranty. Thank you, Matthew
Question:	Can these be magnetized
Answer:	Yes, they can.

Product description

Wera 17 Piece Kraftform Kompakt 60 is designed for the Professional User. Kraftform Kompakt sets include Kraftform bitholding Screwdriver and long bits that can be quickly changed without the use of special tools. Wera’s Kraftform bitholder features the Rapidaptor with quick-release chuck that allows for speedy one-handed bit insertion and removal for insert and power bits. All Wera hand tools feature the ergonomic Kraftform handle that fits the shape to the hand for the ultimate in comfort and high-speed torque transfer. Limited Life Time Warranty. Set contains Kraftform bitholding Screwdriver, 16 - 3 ½-inch bits, 1 Slotted - 7/32”; 4 Hex-Plus bits - 3mm, 4mm, 5mm, 6mm; 3 Phillips bits - PH1, PH2, PH3; 3 Pozidriv - PZ1, PZ2, PZ3; 5 TORX BO (Bore-hole) - TX10 BO, TX15 BO, TX20 BO, TX25 BO, TX30 BO. Includes durable pouch for transport and storage. Wera – The Best Tools For The Job!

From the Manufacturer

Wera 17 Piece Kraftform Kompakt 60 is designed for the Professional User. Kraftform Kompakt sets include Kraftform bitholding Screwdriver and long bits that can be quickly changed without the use of special tools. Wera’s Kraftform bitholder features the Rapidaptor with quick-release chuck that allows for speedy one-handed bit insertion and removal for insert and power bits. All Wera hand tools feature the ergonomic Kraftform handle that fits the shape to the hand for the ultimate in comfort and high-speed torque transfer. Limited Life Time Warranty. Set contains Kraftform bitholding Screwdriver, 16 - 3 ½-inch bits, 1 Slotted - 7/32”; 4 Hex-Plus bits - 3mm, 4mm, 5mm, 6mm; 3 Phillips bits - PH1, PH2, PH3; 3 Pozidriv - PZ1, PZ2, PZ3; 5 TORX BO (Bore-hole) - TX10 BO, TX15 BO, TX20 BO, TX25 BO, TX30 BO. Includes durable pouch for transport and storage. Wera – The Best Tools For The Job!

• Includes Kraftform bitholding Screwdriver with Rapidaptor, 3 1/2-inch long bits, and pouch for convenient transport and storage
• Kraftform handle and interchangeable blade system permits rapid blade changes without the need of special tools
• Features Rapidaptor bitholder with quick-release chuck for rapid one-handed bit changes for insert and power bits
• Multi-component Kraftform handle fits the shape to the hand for quick and effortless working
• Limited Lifetime Warranty, German Engineered
• Includes Kraftform bitholding Screwdriver with Rapidaptor, 3 1/2-inch long bits, and pouch for convenient transport and storage
• Kraftform handle and interchangeable blade system permits rapid blade changes without the need of special tools

User questions & answers

Question:	Is this magnetic
Answer:	No it is not, magnetic. Still a great set though.
Question:	Can they be used in a power drill
Answer:	They can be used in a electric screw driver vs a drill. They are quality and tough but they are not meant to be used in a drill. Thos are precision tools and care should be taken using them
Question:	What sort of bits dose it have
Answer:	All bits are listed below and are 89mm long. PH 1, 2, 3 PZ 1, 2, 3 Hex 3, 4, 5, 6 Torx 10, 15, 20, 25, 30 Flat 1x5.5
Question:	this lists a torx 27 as included, the Wera site doesnt. which is correct? thx
Answer:	The T27s Security Torx bit is NOT included with this set. That is an error on Amazon's part. The included Security Torx bits in the 059295 set are: T10s, T15s, T20, T25, and T30s.

Product features

Wera KK 60 Kraftform Bitholding Screwdriver and 3 1/2-Inch Bit Pouch Set, 17-Piece

Pouch with 89-mm long bits. Includes 816 R Kraftform holder with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for manual and power tool operations; 17-piece.

• Kraftform Micro set in a robust pouch
• Anti-roll feature and swivel cap for rapid twisting
• The Wera Black Point tip offers an exact fit and optimum corrosion protection
• Holding function for TORX screws
• E.g. for electricians, opticians, precision mechanics, jewelers or IT hardware fitters

User questions & answers

Question:	Where can I order just the case without the drivers. Part Number
Answer:	05671385001 I just searched for Wera Case on Amazon.
Question:	I purchased this kit a few months ago ( absolutely love it), but I lost one of the drivers down into the bilge of a ship. How do I get a replacement
Answer:	Do a search on Amazon for Kraftform Micro and the number of the driver you lost. They do sell individual drivers.
Question:	are they made in German
Answer:	Czech Republic but the company is german.
Question:	Are the tips of these Wera screwdrivers magnetized
Answer:	Good question! No they are not magnetized. If you need to have them magnetized you need to buy a Magnetizer / Demagnetizer also. Wera and Wiha both make good ones. Hope this helps.We have the Wera screwdrivers in stock.

Product features

Wera 05073675001 Kraftform Micro-Set/12 Sb 1 Screwdriver Set for Electronic Applications

Wera Micro screwdriver set for precision mechanical work. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Storage and transport in a robust belt pouch – so the tool is always at hand.

Product description

Wera 2035/2050 PH 00 - 01/8 Precision Slotted and Phillips Screwdriver SetSlotted Screwdriver: 1.5 x 0.23 x 40mm Slotted Screwdriver: 2.0 x 0.30 x 50mm Slotted Screwdriver: 2.5 x 0.40 x 50mm Slotted Screwdriver: 3.0 x 0.50 x 50mm Phillips Screwdriver: #00 x 60mm Phillips Screwdriver: #0 x 60mm Phillips Screwdriver: #1 x 60mmDesigned to reduce the fastening time and cost per screw connection The spinning cap and the thin profile areas allow for very rapid twisting, and you won't have to readjust your grip. Hand support on convex/concave cap offers both an easy turning action and comfortable hand rest Wera Black Point tip and hardening process guarantee long service life and increased corrosion protection Anti-roll protection stops screwdrivers from rolling away Manufacturer Part #: 05345271001

User questions & answers

Question:	Do the tops on this rotate/spin freely
Answer:	Yes. These are well made screwdrivers.
Question:	Magnetic tips? Thanks
Answer:	No, but they can be magnetized with a separate magnetizer/demagnetizer. Wera sells one which can be purchased here: https://www.amazon.com/dp/B00CA36ZTU
Question:	Do the tip sizes start at .23mm and work up to .50mm for the slotted screwdrivers? I need varying sizes under 1mm to dismantle old watches. Thanks
Answer:	The sizes you're referencing from the product description are the tip thickness. If I understand correctly, I believe you're looking for the tip width being that small which wouldn't be the case with this set. For example, the smallest 1.5 x 0.23 x 40mm slotted screwdriver in this set has a tip width of 1.5mm, tip thickness of 0.23mm and a blade/shaft length of 40mm.
Question:	what sizes are these screwdrivers
Answer:	The sizes are in the product description, but included in the set are the following seven screwdrivers: Slotted Screwdriver (tip width x tip thickness x blade length): 1.5 x 0.23 x 40mm, 2.0 x 0.30 x 50mm, 2.5 x 0.40 x 50mm, 3.0 x 0.50 x 50mm; Phillips Screwdriver (tip size x blade length): #00 x 60mm, #0 x 60mm, and #1 x 60mm.

Product description

Wera Chisel driver set for fastening, chiseling and loosening seized screws. Multi-component Kraftform handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. A hexagon blade out of High quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an integrated impact cap for enhanced durability and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace and handle markings make for simplified finding and sorting of the tool. All frequently needed screw driving profiles in a single set. Includes 2 racks for tidy storage.

• Chisel driver for fastening, chiseling and loosening
• Hexagonal blade extending through the handle
• Handle markings for simplified finding and sorting of the tools
• Impact cap and bolster for the transfer of higher torque

User questions & answers

Question:	Is the bolster imperial or metric
Answer:	They are metric. Either 8, 10 or 13mm depending on the screwdriver.
Question:	What sizes are included in this set
Answer:	917 SPH 1 x PH 1x80 1 x PH 2x100 1 x PH 3x150 918 SPZ 1 x PZ 1x80 1 x PZ 2x100 1 x PZ 3x150 932 A 1 x 0.6x3.5x80 1) 1 x 0.8x4.5x90 1 x 1.0x5.5x100 1 x 1.2x7.0x125 1 x 1.6x9.0x150 977 TORX® 1 x TX 20x90 1 x TX 25x100
Question:	Where are they made
Answer:	Don’t know where they are made, I assumed because of the price they are domestic. I am a bit disappointed due to their length, they are all approx. the same length and can’t get as much torque as I had hoped.
Question:	What is the size of the bolster
Answer:	different by each size driver. Best wrenched with a Knipex Pliers Wrench.