13 best stanley tools pliers

Product description

WORKPRO 7-Piece pliers set

• The set includes: 8-inch groove joint, 8-inch and 6-inch slip joint, 7-inch linesman, 6-inch and 4.5-inch long nose, and 6-inch diagonal pliers. Covered slushing oil for rust protection. Wipe these pliers before using then store them in a dry environment.
• DROP FORGED POLISHED STEEL: Heat treated durable body construction. Tips: pliers are covered in grease to prevent getting rusty, wipe grease off before using.
• HARDENED CUTTING EDGES: Long-lasting, increased cutting ease and performance.
• COMFORT GRIP HANDLE: Double-dipped coating to ensure safe and secure non-slip handling.
• CONVENIENT FOR: DIY home maintenance, garden projects and more! Great additions to your existing basic tool set.

User questions & answers

Question:	Would these work with Metal Earth projects
Answer:	Dear ArvyWe don't know if they are too big or not professional for Metal Earth projects. Because this set is for basic home use.Here is another pliers set for your reference, the precision set:https://www.amazon.com/dp/B019MDJZH4Best Regards
Question:	where is it made
Answer:	As most of national brand, it’s made in China with high quality
Question:	Does this set come with a case to hold the pliers
Answer:	Dear EdgarThe pliers set is packed by a carton case with Logo Workpro.Thanks
Question:	I’m looking for a tool to snap off the end of an eye glass screw. Would one of these be small enough for that
Answer:	No, you'd better choose a mini plier for that project. B019MDJZH4 is the ASIN of WORKPRO's mini pliers set.

Product features

The Essential Plier Set For Every Home

The perfect addition to any toolbox.

• Long Nose - Precision tip (needle-nose) for cutting, holding and bending
• Slip Joint - Versatile, adjustable span, includes wire cutting shear
• Diagonal - Quickly and efficiently cut wire
• Linesman - Rugged design for gripping, bending and cutting wire or cable
• Groove Joint - Adjustable width jaw for grasping and turning

6-inch and 8-inch Slip Joint Pliers

• Built-to-last with versatile adjustable spans. Includes>

4.5-inch and 6-inch Long Nose Pliers (Needle Nose)

• Crosshatch teeth patterned steel grip for excellent control while holding or bending. Hardened edge blade for increased ease of cutting
• Small pliers is great for precision work in hard-to-reach areas

6-inch Diagonal Pliers

• Induction-hardened cutting edge to quickly and efficiently cut wire

8-inch Water Pump Pliers

• Quick changing adjustable width jaw for grasping and turning

7-inch Linesman Pliers

• Rugged heat-treated steel with precision-machined jaws designed for gripping and cutting wire and cable

Product description

Stanley J250G Proto Lock Ring -inch Horseshoe-inch Washer Pliers - 9-inch For spreading both soft iron horseshoe lock washers used on brakes and tempered steel lock rings used on gear and bearing shafts. Plastisol grips for added comfort. 9-inch Overall length 0.49-lbs Weight.

• For spreading both soft iron horseshoe lock washers used on brakes and tempered steel lock rings used on gear and bearing shafts
• Plastisol grips for added comfort
• 9-inch Overall length
• 0.49-lbs Weight

User questions & answers

Question:	I purchased this lock ring plier in june of 2018, and one of the tips broke today/normal use. does this tool have a warranty
Answer:	Stanley Proto supposedly offers a lifetime warranty on their hand tools. I bought a wrench a while back for a special job and the pin that held everything together snapped. I contacted Proto and sent them pictures. They wanted me to pay to ship it to them and then they would replace the pin. Not what I would consider professional in a warranty service. I shouldn’t have to pay to ship the broken tool to the manufacture for them to honor the warranty. So in other words, if you are willing to pay to have your broken pliers shipped to Stanley Proto, they may end up replacing them.
Question:	Can this be used to remove threads from a candelabra bulb that broke off in the socket
Answer:	I don't know why it would not work. I have used standard needle nose. Bend the metal base that was part of the bulb so you can get a grip on it. This might work well if you have limited room.
Question:	What is the width of the tip, while closed
Answer:	0.1365" measured with a digital caliper. Allow some 'wiggle room'.
Question:	How wide do these open? I need to know for sure, not about
Answer:	I need pliers that work on lock ring that has a forty five cut . Don't need pliers that work on snap rings with eyelet to remove

Product description

Stanley 84-114 3 Piece Basic 6-Inch Slip Joint, 6-Inch Long Nose, and 6-Inch Diagonal Plier Set

The Stanley 84-114 Basic Pliers Set includes 3 sets of pliers that feature forged-steel construction for durability. A rust-resistant finish protects the pliers from the elements and keeps them looking fresh after a hard day's work. The jaws are machined to give you a slip-resistant grip, and the tool's double-dipped handle gives extra comfort. For extra durability, the pliers feature hardened cutting edges, and chrome-nickel steel gives them an extra-tough cutting edge. These pliers meet or exceed ANSI standards and include a limited lifetime warranty. View the comparison chart for the type of pliers that are best for you.

• Includes 3 sets of pliers with forged-steel construction for durability
• Forged-steel construction for durability
• Rust-resistant finish for greater protection; double-dipped handle for extra comfort
• Hardened cutting edges and chrome-nickel steel for extra-tough cutting edge
• Meets or exceeds ANSI standards

User questions & answers

Question:	Are they light compared to other pliers
Answer:	Yes, these pliers are lightweight.
Question:	Would it work to get a shower head off
Answer:	Pliers are not the best tools for getting a shower head off. I would suggest you acquire an adjustable wrench.
Question:	Does this set include wire cutting pliers
Answer:	The proper term is "diagonal cutting pliers" yet too many manufacturers and box stores mislabel as shown in this listing. Yes, cutting pliers are included. The needle nose pliers has a cutting feature as well.
Question:	Are the pliers and/or wire snips spring loaded
Answer:	These pliers are not spring loaded.

Product features

3 pc Basic Plier Set

Pliers set designed for grasping, bending and cutting

Oil-resistant dipped handle allows for a comfortable grip

Drop-forged steel is strong and durable

Meets ANSI specifications : 6" Slip Joint Pliers 6" Diagonal Pliers 6" Long Nose Pliers

Product description

Diagonal Cutters, Uninsulated, Nonsparking No, ESD Safe No, Nose Type Oval, Overall Length 6 In., Jaw Length 15/16 In., Jaw Width 53/64 In., Standard Tool (Accessory Needed for Tethering), Flush Cut, Cutting Capacity/Material 15/16 In., Spring Return No, Wire Stripper No, Jaw Bend 0 Degrees , Tip Width 15/32 In., Material Steel, Handle Type Ergonomic, Handle Color Black, Voltage Rating Not Rated

From the Manufacturer

Used for cutting hard wire.

• Mpn: 84-027
• Country of manufacture: China
• Manufacturer: Stanley

User questions & answers

Question:	Will these cut extra heavy duty cable ties (24 inch/175lbs)? do not want to work at it wiggling, want a quick snip. thank you
Answer:	Yes, you should have no trouble cutting those cable ties with these cutters.
Question:	Does this have a yellow or black handle? There are two different pictures shown
Answer:	The handle is yellow but the outside surfaces (where the palm and fingers contact while using) are black
Question:	Do these make flush cuts
Answer:	No, this does *not* make flush cuts
Question:	Will these snip/clip (not have to wiggle back and forth) heavy duty thick zip ties? Thank you
Answer:	The previous 3 answers, seems to me, to have answered the question about cutting zip ties!

Product description

Stanley 84-029 8-Inch Bi-Material Lineman PliersThe 8" linesman pliers are comfortable and durable. Its bi-material handle helps you grip the tool more comfortably. With a fixed joint design for grasping, bending and cutting, induction hardened jaws that helps keep tool stay sharp, and a body made of drop-forged steel, this tool is indispensable for your tool box, work bench or tool belt. Fixed joint design for grasping, bending and cutting. Induction hardened jaws helps tool stay sharp.   Drop-forged steel for strength and durability. Special FeaturesFixed Joint Design

From the Manufacturer

Machined jaws help grip items securely. Used for bending, grasping and cutting hard wire.

• Machined jaws help grip items securely
• Used for bending grasping and cutting hard wire
• Limited Lifetime

User questions & answers

Question:	Will this cut clothes hanger wires
Answer:	I wouldn’t buy. I used it once and had to buy a new phone. Killed the battery!
Question:	does this help with magnetic snaps
Answer:	It works on my 8+
Question:	What length (or width) is the 8-inch referring to? The length of what
Answer:	Hi! You get 6 for that price.
Question:	Hi. Till how many cms or inches can be opened? Thank you
Answer:	Of course it does. It has to get power from somewhere!

Product description

Stanley 84-096 5-Inch Needle Nose Plier

From the Manufacturer

The Stanley Needle Nose Pliers feature long, tempered jaws ideal for bending wires or working with small objects as well as work in tight places. With a forged, chrome-nickel steel construction which meets or exceeds ANSI standards, these needle nose pliers have a rust-resistant finish and machined jaws for slip-resistant grip. The double-dipped handles provide comfortable use. This tool measures 5 inches n length and is backed by a lifetime limited warranty.

• Long tempered jaws for working in hard to reach areas
• Excellent for work in tight places
• Forged steel construction, Rust resistant finish
• Double-dipped handles provide comfortable use
• Length: 5 inches; backed by lifetime limited warranty

User questions & answers

Question:	Are they round? I need them to make earrings and so I need them to be round so that I can cool the wire around them
Answer:	Not sure where you need it to be round. They are needle nose pliers, and perfect for my purpose of putting quilting pin covers on pins. The clamping part is serrated and they grasp very well. I hope this helps you.
Question:	Can you cut wire with them? Sometimes needle-nose pliers have a sharp edge near the handle that you can use to cut wire - wondering if these do
Answer:	We can confirm that the Stanley Needle Nose Pliers - 127mm - 0-84-096 are designed for gripping. They do not have a sharp edge near the handle to cut wire.
Question:	Are the jaws on thes serrated or smooth
Answer:	Hi James- They are serrated through the jaws. I have posted some pictures (hopefully Amazon will allow them) with close pictures of the jaws against a ruler.
Question:	I need the exact dimensions on the tip, widht and height, have to reach a tight space
Answer:	Closed the tip is 1/8" and at hinge 15/16" to outside edges. The jaw itself tapers from 3/32" to approx 19/64" about 1 & 5/8" up from tip. Total length is 5 &7/8". Total jaw opening distance is 2 & 1/16". Tip opens to about 1" which makes the hinge end right before bend in handle approx. 11/16". Hope that helps!

Product features

Stanley 84-096

Long tempered jaws for working in hard to reach areas

Forged steel construction

Rust resistant finish

Double dipped handle for comfort

Product description

Stanley Hand Tools 84-105 6" Diagonal Pliers

• Forged steel construction
• Machined jaws for slip-resistant grip
• Double dipped handle for user comfort

Product description

The STANLEY 8-inch Groove Joint Pliers have bi-material grips to help you grip the tool more comfortably. With tongue and groove design that helps preventing slipping and body made of drop-forged steel, the chanel locks pliers are indispensable for your toolbox, work bench, or tool belt.

From the Manufacturer

Adjustable-width jaw designed for grasping and turning. Used for plumbing, automotive and general applications. Rust-resistant chrome finish. Machined jaws help grip items securely.

• Channel locks pliers with 3-zone bi-material grips for comfort and control
• Black oxide finish on channellock pliers helps resist corrosion
• Channellock pliers set is made from drop-forged steel for strength and durability

User questions & answers

Question:	Will this work to remove a shower arm
Answer:	Yes, you may use them for that application
Question:	I have a 3" diameter pvc threaded pipe. What size adjustable plier will loosen it
Answer:	This only opens to 1 1/2 inch, only tools able to get to at moment. This type of adjustable wrench isn't good for pvc pipe. There are plumbing tools for that.
Question:	What's the biggest the jaw can open
Answer:	This model has 6 adjustment positions.
Question:	Would this work to loosen an aerator screwed into the end of a sink faucet? Need to change it and too tight to unscrew by hand. Thanks
Answer:	Yes the joint pliers should remove the aerator. It may work best if you place a rag between the pliers and the aerator.

Product description

End Cutting Nippers, Overall Length 6-1/2 In., Tip Width 7/8 In., Jaw Length 25/64 In., Jaw Width 1-11/32 In., Cutting Edge Yes, Cutting Capacity/Material 25/64 In., Handle Type Dipped, Handle Color Black, Material Steel, Spring Return No

The Stanley 89-875 6-1/2-Inch MaxSteel End Cutting Pliers is the perfect tool for flush cutting soft wire or pulling small nails and brads. These pliers also feature hand-finished and induction-hardened cutting edges. MaxSteel pliers are designed to reduce cutting effort by 45 percent, and increase edge life by 33 percent. Drop-forged from high-carbon steel for increased durability, this 6-1/2-inch cutting plier meets or exceeds ANSI standards. View the comparison chart for the type of pliers that are best for you.

From the Manufacturer

Stanley 89-875 maxsteel 6-1/2-Inch end cutting pliers.

• Mpn: 89-875
• Country of manufacture: Thailand
• Manufacturer: Stanley

User questions & answers

Question:	Can this cut thick 14 gauge steel wire
Answer:	Sure, it should be helpful. And in the car, you can just plug in the car USB port, then the phone cooler will help your phone solve the heating issue. It's the best solution way
Question:	are this good rivets
Answer:	Hello, It's work for all the phone type in anywhere you want. But it's needs to charging by USB Cable when it's working. So please make sure you can connecting with electronic. It's supports to charging by Power bank or any other USB devices. Thank you
Question:	Are these spring loaded
Answer:	hi, XS MAX phone size is 77.4mm (3.05 inch), the phone cooler item support max size phone is 95mm, so that's workable.
Question:	How wide accross is the cutting blade
Answer:	Ok

Product description

Stanley J253G Proto Soft Jaw Cannon Plug Pliers - 9-1/2-inch Capacity of 3/4-inch to 2-1/2-inch. Four position pivot design provides greater concentricity. Replaceable urethane padded jaws protect work piece from marking or scratching Plastisol grips for added comfort. 9-1/2-inch Overall length.

• Capacity of 3/4-inch to 2-1/2-inch
• Four position pivot design provides greater concentricity
• Replaceable urethane padded jaws protect work piece from marking or scratching
• Plastisol grips for added comfort
• 9-1/2-inch Overall length, Made in USA

User questions & answers

Question:	Widest opening
Answer:	Yes. Made in USA is stamped on the side of the pair that I recently purchased.
Question:	how wide is the ruber in the jaws
Answer:	Yes. Model 229-01G is a 5-9/16" version.
Question:	What material are these made of
Answer:	Despite the claim of having "diamond serrated jaws" (taken directly from the Proto website), the pair I received has serrations going straight across.
Question:	Before i buy: are replacement jaw inserts available? pn also helpful. mil-cannon plugs wear out apex inserts pretty fast
Answer:	As long as you are ordering a small “bail making pliers” because I’m assuming the ear cuffs you’re making are small...The 6mm/8.5mm may be too large, that’s why I ordered this set because the smaller ones were not grasping the wire good enough. You’ll probably get other answers from more experienced jewelry makers, this is just my observation. Good luck!!

Product description

Stanley 84-097 6-Inch Slip Joint Plier

From the Manufacturer

The Stanley Slip Joint Pliers provide reliable and sturdy grasping and prying ability for all your general applications. With a forged, chrome-nickel steel construction which meets or exceeds ANSI standards, these long nose pliers have a rust-resistant finish, hardened cutting edges for strength, and machined jaws for slip-resistant grip. The double-dipped handles provide comfortable use. This tool measures 6 inches in length and is backed by a lifetime limited warranty.

• Slip joint pliers provide reliable and sturdy grasping and prying ability
• Hardened cutting edges for durability; machined jaws for slip-resistant grip
• Forged, chrome-nickel steel construction with rust-resistant finish
• Double-dipped handles provide comfortable use
• Length: 6 inches; backed by lifetime limited warranty

User questions & answers

Question:	Is this plier made in the USA
Answer:	Our company is a global manufacturer and distributor of power tools and accessories. We currently manufacture our tools in the US, Mexico, Brazil, China, Italy, the UK, and the Czech Republic, among other locations, and our products are built with materials and components from all over the globe. Our products maintain the quality our customers have come to know and expect.
Question:	how wide do the jaws open
Answer:	it about 3 inches max

Product description

The 2-piece plier set includes both 6" slip joint and 6" long nose pliers that are designed for comfort and long life. With oil-resistant dipped handles to help you grip the tools more comfortably, bodies made of drop-forged steel, and the ability to grasp, bend and cut, these tools are indispensable for your tool box, work bench or tool belt.

• Designed for grasping, bending and cutting
• Oil-resistant Dipped handle for a comfortable grip
• Drop-forged steel for strength and durability
• Meets ANSI specifications

Product description

Stanley J197 Proto Safety Wire Twister Reversible Pliers - 11-inch Reversible safety wire pliers provide right and left twist capability often eliminating the need for a second plier. Meet SAE Aerospace Standard AS 567 Twister Requirements. Provides all of the features of standard Proto Safety Wire Pliers. J196 designed for wire sizes .020-inch - .041-inch. J197 designed for wire sizes .020-inch - .060-inch. J198 designed for wire sizes .020-inch - 0.60-inch.

• Reversible safety wire pliers provide right and left twist capability often eliminating the need for a second plier
• Meet SAE Aerospace Standard AS 567 Twister Requirements
• Provides all of the features of standard Proto Safety Wire Pliers
• J196 designed for wire sizes .020-inch - .041-inch
• J197 designed for wire sizes .020-inch - .060-inch, Made in USA

User questions & answers

Question:

How do you use it

Answer:

Once you have pulled the wire through whatever it is that you are locking with the wire you cut the wire longer than you need and put both ends of the wire into the jaws of the plier and lock the plier with the locking mechanism. Once this is done the only part of the tool that you touch is the center "pull" knob which you just pull on and let the plier spin which in turn twists the wire. Pull until the wire is twisted and slightly touching the nut, bolt or whatever it is that you are locking then cut the twisted wire approximately 3/8" or so from the item you are locking (this will vary depending on what you are doing). You will usually be left with a little twisted wire still attached to the tool which you can just unlock and throw away or recycle. If you are locking multiple nuts/bolts or whatever just Google "how to safety wire multiple nuts" and you will find many instructions for this as it is extremely important to set things up so that if something comes loose it will pull tighter on the wire and not looser. Wire routing is super important. Good luck.