12 best cutting pliers

Product description

ABC

• Durable nickel chromium steel construction
• ProTouch grips provide extra comfort and reduces hand fatigue
• Induction hardened cutting edge stays sharper, longer
• Machined jaws for maximum gripping strength
• Meets or exceeds ANSI specifications

Product description

Specification

Maximum clamping height:13cm

Size:32x20cm

Weight:2.25kg

Product Description

1.45 ° Mitre Clamp is mainly use for the (man-made and natural), or other similar sheet of 45 stitching. Since its launch, with high quality and innovative ideas, best-selling home and abroad, welcome customers to purse.

2.When two workpieces are processed into a 45 edge bevel, then clean the 45 face of workpiece, evenly coated with adhesive, then put two workpiece of 45 bevel face assembling together, and the two 45°workpiece fit into a 90 with each other, use the fixture in plastic extrusion seam stitching.

3.First, put the bottom of width stone on the fixture work surface which with white rubber, the side of the narrow stone close to the 90 inside of the fixture.

4.Then two binder lever can be adjusted by adjusting spring device access to the top position of the workpiece,then rotating the screw at the top of the binder lever to put pressure in place to maintain the fixture locked position for a certain time, until the workpiece fully bonded joints, solid, and then release the fixture.

• √ 45° miter pliers are mainly used for (man-made and natural) or other similar 45-pin sheets.
• √ When processing two workpieces into 45 beveled edges, clean the 45 sides of the workpiece, apply adhesive evenly, and then assemble the two 45 beveled workpieces together.
• √ Two 45° workpieces are matched to each other to form 90, and clamps are used in the plastic extrusion seam.
• √First, place the bottom of the wide stone on the working surface of the jig made of white rubber, and the side of the narrow stone is 90 degrees close to the inside of the jig.
• √ Then you can adjust the two binding rods by adjusting the position of the spring device to the top of the workpiece, and then rotate the screw on the top of the binding rod to apply pressure to maintain the fixing device for a certain period of time until the workpiece is completely bonded and the joint is firm, then loosen the clamp .

• Harder than other wire Cutters -- the edge is specially Hardened. It easier to cut most hard things.
• Safer & non-slip scrub instead of PVC -- the handles of most wire Cutters are PVC. However, the design of our wire cutter is scrub. It is non-slip and comfortable for usage, which has the function of anti-electronic shock. It is safer during operation.
• Cut all kinds of wires up to 1. 8mm -- the wire cutter is made of super quality solid and durable steel. It is great tool which is easy to cut all kinds of wires including cables, memory wires, headpins, eye pins, small chain, Tiger tail, cords, beading and so on.
• Modern & scientific workmanship -- the production of wire cutter is adopted modern material chrome molybdenum alloy steel + CR-V. The scientific design of the ergonomic coating handle provides comfortable grip to protect your arm, it can save time and reduce fatigue while working.
• 100% satisfaction -- we are confident that BOENFU Wire cutter is your best choice. If you are unhappy with the product, please feel free to Contact us. We will do our best to provide the best service for you.
• material type: Iron

User questions & answers

Question:	Where are they manufactered. usa, china
Answer:	J2000-48 (blue molded grips) is made from a hardened steel to have the ability of being able to cut harder metals such is those used in the manufacturing of steel screws and nails. D2000-48, as well as all other 2000 series cutters (with blue grips to indicate capable of being able to cut screws and nails) is made of the same material. The J248-8 (red molded grips), J228-8 (rubber slip on grips), and all other red colored grip cutters are made with a softer metal and are not able to cut the harder materials that fasteners and other hardware contain without causing damage to the cutting edges.
Question:	Will this cut 18 guage steel wire? I need it to cut floral wire
Answer:	I used to cut flex with my red handled diagonals all the time and never had an issue. As long as you bend the flex and use these to snip (not cut) you will be fine. After you snip, bend back and forth until the metal breaks.
Question:	Will these cut the metal ring of a parakeet's leg
Answer:	Blue handles on Klien tools mean they are the hardest. They will cut lots of screws before dulling out in the crevice at the pivot point. I think dresser knobs are like 10-32 screws. If so then they will cut those all day with no issues.
Question:	could I cut toenails with these
Answer:	Black and Blue handles (for this model) signify the toughness rating. Black and Blue handles for this diagonal cutting pliers means it will easily cut through small zink bolts (#4 (or less), #6, and #8 max) as well as stainless steel (but i personally would never do that, I would switch to bolt cutters at that stage of the game). Don't use diagonal cutting pliers to cut small bolts, but you could if you had to. Also, the thing about them needing to be "broken in" because they are stiff .... blah. You are thinking about crappy Chinese made pliers. These pliers do not need to be broken in, stiff is good. To make them looser, put a dab of white lithium grease in the crevice where the cutting edge of the tool meets the pivot joint. Do it on both sides of the pliers and then open and close the handles over and over again until you see the grease leak out of the pivot. Wipe clean and your good to go, for life. If you get the red and black handles for this pliers, its a good choice for cutting copper wire. It's a softer smoother cut than the blue and black handles one. It will never hurt your hand when cutting, and can make millions of cuts. I got black and blue because I already own the other ones.

Product features

BOENFU 6 Inch Wire Cutter - The Professional Cutter

Our factory produces wire cutters for more than 10 years and exports to the whole world.

Specifications

• Color: Black
• Weight: 164g
• Size: Approx. 16 * 5 * 1 cm / 6.3 * 2 * 0.4 in
• Material: advanced CR-V chrome vanadium alloy steel

Attention

• Please do not scratch objects with the blade tip.
• Please do not touch the blade part directly with hand.
• Please do not use the cutter to cut hard material and steel wire, etc.

Note: If you see or smell oil on the tool, it is normal phenomenon. A little oil can make the tool work more smooth and protect the tool.

Product description

6 inch diagonal pliers

• Durable nickel chromium steel construction,Induction hardened cutting edge stays sharper, longer
• Upgraded version professional grips provide extra comfort and reduces hand fatigue
• Machined jaws for maximum gripping strength
• Meets or exceeds ANSI specifications

User questions & answers

Question:	Can you use these to cut wire there is a picture of a man holding some chain is he just holding the chain or is he going to cut it
Answer:	1 Year Manufacturer Limited Warranty
Question:	months later, question remains....Do they resist rust
Answer:	Not, it doesn't match
Question:	Will these cut through 23 gauge stainless steel hardware cloth
Answer:	Yes!!
Question:	months later, question remains....Do they resist rust
Answer:	No, it doesn't. I don't think it is a must for rough framing gun

Product features

Durable & Powerful

Durable nickel chromium steel construction.

The surface is coated with anti-rust oil.

Ergonomic soft PVC handle provide extra comfort and reduce hand fatigue.

• HIGH-QUALITY S58C STEEL: Carbon steel with high-quality mechanical structure, precision cutting edge processing, anti-rust treatment, and high-frequency wave heat treatment, with high-quality shear performance and sharp cutting.
• FLAT THIN BLADE: OF-06 high-performance electronic nozzle pliers. The blade part is heat-treated with high-frequency wave 54-62HRC, high hardness and durable.
• THE SPRING HAS GOOD TOUGHNESS: The handle has an automatic opening function of the spring, the toughness is durable, and the operation is labor-saving, fast and light, and it is not easy to fatigue after long-term use.
• WIDELY USED: Suitable for Gundam model, trimmed plastic parts products, soft copper wire under 2.0mm/0.07inch.
• VISCOPLASTIC HANDLE: Designed with PVC material, the handle fits your hand comfortably and is not easy to fall off.

Product description

Made of carbon steel, high hardness, good toughness, durable. Nickel-plated surface, wear resistance, anti-corrosion, anti-rust. The middle connecting shaft of the body, molding In One, tight link, easy to use. Antiskid handle is made of PVC, ergonomically designed, comfortable and durable. Industrial standard, fine workmanship and durable. Laser heat-treated cutting edges last longer. Cutting mouth sharp, let the shear plane flat.

• Materials : Carbon steel
• One piece Yiyitools Diagonal Cutting Pliers – 160-mm, Yellow and Red in the box
• Made of carbon steel, high hardness, good toughness, durable. Nickel-plated surface, wear resistance, anti-corrosion, anti-rust. The middle connecting shaft of the body, molding In One, tight link, easy to use. Antiskid handle is made of PVC, ergonomically designed, comfortable and durable. Industrial standard, fine workmanship and durable.
• Laser heat-treated cutting edges last longer. Cutting mouth sharp, let the shear plane flat.
• size: 25x7. 5x3cm weight: 232g

User questions & answers

Question:	Could it cut a small steel cable
Answer:	Thank you for choosing Rubbermaid Home. Our goal is to provide our customers with the highest quality and service. The Rubbermaid Shed Large Accessory Kit is not compatible with the shed model 3746(HIP 046).

Product features

YIYITOOLS 160MM DIAGONAL CUTTING PLIERS

Changzhou Yiyi Tools Factory is an extroversive enterprise with 20 years of professional experience in the production and sale all kinds of rubber hammer, dead blow rubber hammer, plastic dead blow rubber hammer, hammer with plastic, rubber hammer and the installation of the rubber and plastics products. After years of efforts, the size of the enterprise expanding continuously.

Anti-Slip Grip

Diamond textured non-slip handle grip comfortably keeps hammer in your hands after impact

High Quality TPR Material

Designed to fit the grip of the user’s hand ensuring comfort and control

Wide Range Of Uses

Suitable for woodworking decoration, DIY, etc.

Product description

An Amazon Brand

• Electrical repair pliers kit with a 10-inch cable cutter and 9.5-inch crimping pliers; ideal for electrical, communications, and construction work
• Crafted from high-quality chrome vanadium forged steel for reliable strength and long-lasting cutting performance
• Cable cutter with beveled jaw tips for proper mating and shearing
• Plastic-dipped cushioned handles provide a secure, comfortable grip; rugged abrasion-resistant nylon sheath included for easy storage and transport
• Backed by an Amazon Basics 1-year limited warranty

Product description

Channellock E Series E337CB 7" HL Diagonal Cutting Plier with Lap XLT Joint and Code Blue Grips. Made from C1080 steel for superior performance.

• XLT Xtreme Leverage Technology means considerably less force required to cut than traditional high leverage
• Lap joint diagonal
• CHANNELOCK's knife and anvil style cutting edge ensures perfect mating and superior cutting edge life
• Sleeker, Lighter design, streamlined for easier handling
• Made in the USA
• High-carbon C1080 steel for superior performance on the job and specially coated for ultimate rust prevention
• Code Blue grips are designed for durability and comfort

User questions & answers

Question:	Are the cb's made in usa? i bought a 6 in one cb screwdriver that was made outside the country
Answer:	Yes
Question:	Warranty? Just watched a video rating these #1 of 10 and claiming lifetime warranty for original buyer. What's the story on this product
Answer:	No
Question:	Are these spring loaded so they pop back to the open position after making a cut
Answer:	no
Question:	Illustration state 3.8 inches. Title says 7 inches. Which is it
Answer:	No

• 7” End Cutting Plier, Nail Puller
• Made From High Carbon Steel For Long Lasting Performance And Preventing Rust
• Soft Plastic Coated Grip
• Dual Use End Nipper Pliers To Cut Wires Or Nails Or Simply Pull Them Out
• Perfect For Carpenters, Construction, Handymen, Installing New Floor, Etc.

User questions & answers

Question:	Are these manufactured in the USA
Answer:	Bracket adjustable no problem
Question:	what country are these manufactured in
Answer:	Hi. No, assembled in China with Japanese compressor. Thanks for writing, Ron Spain Bonterra Home & Garden
Question:	How wide are the jaws
Answer:	Unfortunately we don't ship to Hawaii
Question:	Essential information that's left out of the specs. How wide is the actual cutting/pulling portion
Answer:	Hi. Yes, the 230V service line goes from the panel to the outside unit. You do not need any interior power for the inside unit. It is powered by the outside unit. A 14/4 stranded wire is included which goes between the indoor and outdoor units: 2 x power, 1 x ground, 1 x communications. Thanks for writing. Ron Spain Bonterra Home & Garden

Product features

PACKAGE INCLUDE:

• Cutting Plier, Nail Puller
• Size: 7 in

EASY NAIL REMOVAL

This Bates Nail Puller Pliers is crafted to ease any actions and help carpenters in their daily duties. These pliers helps you remove nail easily, they are made durable, strong, well sharpened to be able to cut nails without causing any damage to your wood piece surface. You will be able to work during longer hours, comfortably with its soft plastic coated grip without feeling any pain at the end of the day on your project.

EASY NAIL REMOVAL

This Bates Nail Puller Pliers is crafted to ease any actions and help carpenters in their daily duties. These pliers helps you remove nail easily, they are made durable, strong, well sharpened to be able to cut nails without causing any damage to your wood piece surface. You will be able to work during longer hours, comfortably with its soft plastic coated grip without feeling any pain at the end of the day on your project.

EASY NAIL REMOVAL

This Bates Nail Puller Pliers is crafted to ease any actions and help carpenters in their daily duties. These pliers helps you remove nail easily, they are made durable, strong, well sharpened to be able to cut nails without causing any damage to your wood piece surface. You will be able to work during longer hours, comfortably with its soft plastic coated grip without feeling any pain at the end of the day on your project.

EASY NAIL REMOVAL

This Bates Nail Puller Pliers is crafted to ease any actions and help carpenters in their daily duties. These pliers helps you remove nail easily, they are made durable, strong, well sharpened to be able to cut nails without causing any damage to your wood piece surface. You will be able to work during longer hours, comfortably with its soft plastic coated grip without feeling any pain at the end of the day on your project.

Product description

These diagonal-cutting pliers were designed for rebar work, and are popular with Ironworkers. The 13 degree angled head makes it easier to work in confined spaces while the hooked handle improves the grip and reduces slippage. The high-leverage design has 36-Percent more cutting power. A hot-riveted joint ensures smooth action and no wobble in the handle. This pair will be your go-to tool when working with soft annealed rebar tie wire. 9-Inch pliers are ideal to cut the rebar tie wire. Diagonal Cutters with induction hardened knives for long life. Pliers have plastic-dipped handles for comfort. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

From the Manufacturer

Klein D248-9ST 9-Inch High-Leverage Diagonal-Cutting Pliers. The Klein D248-9ST 9-Inch High-Leverage Diagonal-Cutting Pliers has an angled head design for easy work in confined spaces. The Klein D248-9ST 9-Inch High-Leverage Diagonal-Cutting Pliers has a hooked handle for improved grip. The Klein D248-9ST 9-Inch High-Leverage Diagonal-Cutting Pliers features the High-leverage design where the rivet is closer to the cutting edge for 36-Percent greater cutting power than other pliers designs. The Klein D248-9ST 9-Inch High-Leverage Diagonal-Cutting Pliers is custom US-made tool steel. The Klein D248-9ST 9-Inch High-Leverage Diagonal-Cutting Pliers has induction hardened cutting knives for long life, a hot-riveted joint that ensures smooth action and no handle wobble, short jaws and beveled cutting edges permit close cutting of wire, and plastic-dipped handles for comfort and ease of identification.

• Ironworkers' pliers for soft annealed rebar tie wire
• Short jaws and beveled cutting edges permit close cutting of wire
• Induction-hardened cutting knives for long life
• Plastic-dipped handles for comfort and ease of identification
• Custom, US-made tool steel

User questions & answers

Question:	Why haven't they made left handed diagnaol klein pliers
Answer:	Might be something good to write the company that makes them.
Question:	What do you recommend for cutting 14 gauge welded wire fencing and are your products still made in the USA
Answer:	Pliers work great and will cut wire
Question:	What diameter of re-bar will these cut
Answer:	No one, this tool is specifically to cut wire only, it’s no to cut any diameter of rebar,I been used this tool for the last 23 years
Question:	How can i contact the seller
Answer:	I think by a phone

Product features

Diagonal Cutters, Ironworker Pliers, 9-Inch High Leverage Rebar Cutter and Rebar Bender

Popular with Ironworkers, these diagonal-cutting pliers were designed for rebar work. The 13 degree angled head makes it easier to work in confined spaces while the hooked handle improves the grip and reduces slippage. The high-leverage design has 36% more cutting power.

Product description

8-In Diagonal pliers featuring a compound action design provide increased cutting force. The multi-zone bi-material grips allow for dedicated comfort and secure grip zones. Made from drop forged steel, these pliers provide strength and durability and offer induction hardened edges that stay sharper longer.

• Compound action design for increased cutting force* (*compared to standard cutting Pliers).
• Multi-zone bi-material grips for comfort and control.
• Induction Hardened cutting edges stay sharper longer.
• Drop forged steel for strength and durability.
• Full Lifetime Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	Is it spring loaded
Answer:	No, it is not spring-loaded.
Question:	are these made in the USA
Answer:	The country of origin of the CMHT81718 is China.

Product description

Get into small spaces with this 6 PC. Mini pliers set. Made from drop forged steel, these pliers offer strength and durability while the multi-zone bi-material grips allow for dedicated comfort and secure grip zones.

• 6-Piece set.
• Case included.
• Multi-zone bi-material grips for comfort and control.
• Drop forged steel for strength and durability
• Full Lifetime Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	Made in china
Answer:	Yes, the CMHT81716 is manufactured in China.
Question:	what are the size of the pliers? 4 inch
Answer:	All are slightly over 4 inches in length
Question:	Can these be used for jewelry making and do the pliers have teeth in them
Answer:	I haven’t tried using them for jewelry. Two of the pliers have teeth, 2 are side cutters, 2 have smooth jaws, including the one with the hooked bill.
Question:	Do we make anything in the us anymore
Answer:	I work in a factory that makes cardboard boxes for the agricultural sector. I know someone who works in a glass factory. We still make some stuff in the USA.