11 best crescent pliers

Product description

Co-molded grips for added comfort. Increase cutting pressure by 50%. chrome vanadium steel for increased durability.



From the Manufacturer

Crescent Pro Series Diagonal Compound Action Pliers offer a winning combination of increased power and unparalleled comfort for exceptional ease of use. Their advanced compound action design provides an increased cutting and holding power of 50%. They take half the effort as standard cutting pliers. In addition, the ergonomically-designed co-molded grips are 30% wider than traditional pliers. The wider contact area spreads out the load of the grip against the fingers and palm for greater comfort and control.

From the Manufacturer

Crescent Pro Series Diagonal Compound Action Pliers offer a winning combination of increased power and unparalleled comfort for exceptional ease of use. Their advanced compound action design provides an increased cutting and holding power of 50%. They take half the effort as standard cutting pliers. In addition, the ergonomically-designed co-molded grips are 30% wider than traditional pliers. The wider contact area spreads out the load of the grip against the fingers and palm for greater comfort and control.

• Crescent PS5429C PRO Series
• 9" crescent pro series diagonal compound action pliers
• Made with co-molded grips for added comfort
• Compound leverage design provides 50% increase in cutting power

User questions & answers

Question:	Is this plier/snipper made in Taiwan (R.O.C.) or in China (mainland
Answer:	I do not know how 'heavy' of a stem you mean, but I have cut artificial stems with these cutters. Many stems are scored to cut in specific spots, but I have cut both. These are pretty sturdy cutters.
Question:	Are these pliers spring loaded, aloowing them to open up completely without assistance? If so how strong is the spring? Will my hand get tired w/ use
Answer:	Yes, the planner has a to-do list so you can check your important daily events conveniently.
Question:	will these cut a saltwater grade fishing hook
Answer:	It starts on July 29, 2020 and runs to July 4, 2021
Question:	Where are they made
Answer:	Mine was black, white and gold with just 2021 on front. Not sure of coloring in pictures

Product features

Crescent 8" Pro Series Diagonal Compound Action Dual Material Cutting Pliers

Overview:

Increase your cutting power by 50% with the leverage-producing compound-action design of these Crescent Pro-Series 8-inch Diagonal Cutting Pliers. Made from chrome vanadium steel for increased durability, these pliers also have co-molded grips for added comfort and control.

Features:

• Co-Molded Grips for Added Comfort
• Increase Cutting Pressure by 50%
• Chrome Vanadium Steel for Increased Durability
• Heat Treated Joint Rivet for Smooth and Consistent Operation
• Induction Hardened Edges for Long Cutting Life
• 1/3 Lighter Than Standard Pliers, Reduces Fatigue
• 1/2 inch jaw clearance

Product description

Co-molded grips for added comfort. Increase cutting pressure by 50%. chrome vanadium steel for increased durability.

• Co-Molded Grips for Added Comfort
• Increase Cutting Pressure by 50%
• Chrome Vanadium Steel for Increased Durability
• Heat Treated Joint Rivet for Smooth and Consistent Operation
• Induction Hardened Edges for Long Cutting Life
• 9" crescent pro series long nose compound action pliers
• Made with co-molded grips for added comfort
• Compound leverage design provides 50% increase in cutting power

User questions & answers

Question:	Are these red or orange
Answer:	The stand is unassembled for shipment. The assembly is very easy and only a few screws.
Question:	Where are these manufactured
Answer:	The male 3.5mm plug is intended for audio/earbud/headphone port connection only. This is not a good plug to use for power connection since the incorrect polarity may momentarily connect as the plug is inserted, with the potential for device damage or even starting a fire.
Question:	Are these pliers spring loaded such that they return to an open position automatically
Answer:	Hi friend, Sorry that currently we do not have shorter option. Thanks for your inquiry and support.
Question:	Are these pliers and cutters
Answer:	This one is kinda stiff. But I like it that way.

Product description

Single-dip handle for easy cleaning and secure gripPocket-sized for increased access and portability Black oxide finish for corrosion resistance.

• Single-dipped handle for easy cleaning and secure grip
• Pocket-sized for increased access and portability
• Black oxide finish for corrosion resistance

User questions & answers

Question:	What is the overall length of this pliers? Is it 4.5 inches or 6.75 inches as stated in the description
Answer:	Table height/Saw height is 35-1/2" +- 1/8" no adjustability. We do however have a kit that could be used with the 2790 to add adjustability. For more information about the kit please call us at 509-758-3954 and ask for Dan.
Question:	Would these fit to change a faucet aerator
Answer:	The DWE 745 fits in our PortaMax 2780
Question:	What’s the length of the handles, from the middle hinge to end
Answer:	Yes. The Delta 36-6020 table saw will just fit in our PortaMax 2790 table saw stand. A much better fit would be our 2780 table saw stand. The difference between the 2780 and 2790 saw stands have mostly to do with the depth (front to back from the operators point of view) of the stand. Ironically the larger the saw gets the less rip you have with the saw in the stand. The saw is always located at the left edge of our table saw stands so a larger distance from the blade to the left side of the saw takes away from the rip distance on the right.
Question:	How large is the jaw opening?... How large of an object will it grab
Answer:	I'm not sure of the dimensions of that radio, but the maximum height from the bottom of the radio to the top of the clip on the back is 4 1/2 inches.

Product features

Crescent 4-1/2" Mini Tongue and Groove Pliers

Features:

• The precision-machined joint and rivet construction assures a smooth action that doesn't slip or come apart
• Unique tooth design grips tighter and gives increased torque from less effort
• V-shaped jaws with an offset, self-locking adjustment grip tightly in any configuration
• 4 jaw positions for flexibility and comfort
• 3/4" jaw capacity
• Alloy steel construction with induction-hardened teeth for maximum durability
• Secure grip from the single-dip handle that wipes clean easily
• Black-oxide finish to prevent corrosion

Product description

Made In Wuppertal-Cronenberg, Germany. In Addition To Quality, Innovation And Performance, Other Important Cornerstones Are Sustainable Actions And Value-Guided Orientation.

From the Manufacturer

With these Knipex 8701250 10-Inch Cobra Pliers, fast adjustment directly on the work piece eliminates time-consuming test adjusting of the correct opening size. Just position the upper jaw to the work piece, push button on pliers and move close the lower jaw. Once adjusted the pliers self-lock on pipes and nuts with no slipping. Optimized shape jaw will grip round, square and hex shaped material. The box joint design provides high stability because of the double guide.

• Precision Grade Performance Tools
• The Number 1 Choice Of Tradesman Worldwide
• Comfortable In Use And Quality Assured Design
• Fit To Match The Needs In The Shop, At Home Or In The Service Field
• Each Tool Is Proven And Tested For Durability And Function In Real World Use And Conditions

User questions & answers

Question:	Do you send the pliers back to amazon or too knipex for warranty exchanges
Answer:	The link we have added to the listing. You can find it in the Product description. you can also find it in the User Guide. Thanks.
Question:	Does it have a pocket clip
Answer:	This adapter cable supports both audio and video output. If you only have video, you need to sound setting to select USB as output type.
Question:	How durable is the push button? I generally try to avoid pliers with a button like that
Answer:	It can support MacBook to projector, but currently does not support the latest Mac Big Sur
Question:	Can someone tell me if this can help to twist open a 3" canning jar lid? I need help in opening jars
Answer:	This is a Thunderbolt device. Does your system have a Thunderbolt port, or is it a USB C port. They both use the same plug. Mine works fine on an HP Z-Book with two Thunderbolt ports.

Product description

Crescent slip joint Cee Tee Co. Combination pliers are drop-forged from alloy steel and accurately machined for best gripping and turning of round objects such as pipes, rods, studs, pins and connections. Jaw Type: Curved Jaw, Capacity : 1 -Inch by 25 mm, Length : 6 1/2 -Inch by 165 mm, Finish: Bright, No. of Jaw Positions: 2 Positions, Wire Cutter: Yes.

• Designed for gripping and turning round objects such as pipes, rods and pins
• Curved jaws combination with machined gripping teeth and wire cutter
• Forged from carbon steel and accurately machined, hardened and tempered
• Bright, plated finish
• Knurled handles

User questions & answers

Question:	What size is the jaw opening
Answer:	50 inches to the right side of the blade.
Question:	Where are the cee tee pliers made? i'm looking at the 6", 6.5" & 8" pliers. my dad only wants ones made in the usa. please advise. thx
Answer:	No I'm sorry it's just not wide enough. The 2790 takes up to 26" deep and from 25" to 32" wide (left to right standing where you would use the saw). It will however fit nicely in the ROUSSEAU 2780 Table Saw Stand. Safe sawing.

Product description

The Crescent X2 Long Reach Pliers contain a compound joint allows access with minimal handle movement. Jaws open greater distance than the handle for added reach in tight locations. Extends pliers where others cannot go. Contains: 13-Inch Long nose and 12.75-Inch 45-Degree Bent Long Nose pliers.

• Long reach and 45-Degree bent nose long reach pliers with compound action joint for increased access in tight spaces
• Dual material grips designed for improved comfort and performance
• Flush rivets for strength and thinner profile
• Tips are ground with milled grooves, allowing you to grip fasteners and other objects tightly
• Corrosion resistant alloy steel

User questions & answers

Question:	Why the 1 to 2 month wait on shipping
Answer:	Here is the official response to the original question taken directly from the knipex website. "Steel starts to rust as soon as it comes into contact with water and oxygen. If a water-resistant coating is applied, it will not rust. Such layers may be an oil film, varnish or electroplated layer of non-rusting material such as nickel or chrome, for example. An oil film is the simplest method of obtaining rust protection. It is particularly effective on a very smooth surface. For this reason the surfaces of pliers are sanded to finely polish them, and are sometimes even mirror polished. Oil films wear off over time and must be reapplied regularly. Layers of varnish also wear off when the pliers are used intensively. However such intensive use generally prevents rust forming on the areas where the coat of varnish has worn away. As a rule, care should be taken to store the pliers in as dry a place as possible. A chrome plated option is worthwhile if condensation (e.g. in a service vehicle) is unavoidable. Almost all KNIPEX pliers are available with chrome plating." the pliers in question are not chrome plated, so a touch of oil from time to time is appropriate.
Question:	what is the overall length of the pliers
Answer:	the teeth are offset
Question:	Would these have a tight enough grip for pulling very thing, new growth saplings and weeds from a rock bed? Roots are somewhat strong
Answer:	Warranty? They are a good product, cheap price, and last a long time. Who needs a warranty? The shipping would cost more than buying a new one.
Question:	Does it have a lifetime warranty
Answer:	The 317 has a side cutter as others have stated. Both plier's are the same except for that but also there is a difference in price. The 3017 is a few dollars cheaper. I don't use the side cutter on mine so really it was a waist of money for me. It all comes down to your preference. They are both excellent pliers.

Product features

Crescent 2 Pc. X2 Straight and Bent Long Nose Dual Material Plier Set

Overview:

We designed Crescent X2 Long Reach Pliers with double joints so that the jaws can open a greater distance than the handles for improved access in tight spots. These long-nose pliers extend where others pliers cannot go. The PSX204C set includes both straight jaw and bent-nose X2 pliers.

Features:

• Long reach pliers for better access in tight spaces
• Double joints allows the jaws to open a greater distance than the handle
• Compound joint opens wider with less effort
• Flush rivets are stronger and have a thinner profile

• Dual material grips for improved ergonomics and comfort
• Milled grooves in the tips grip fasteners and other objects tightly
• Made from corrosion-resistant alloy steel

Product description

This versatile, lightweight set features Crescent's most popular all-purpose miniature electronic flushcutter and needle-nose pliers. It is made to handle virtually every precision cutting and gripping application with ease and comfort at an exceptional value. Superior quality features include advanced handle design, high-quality carbon steel construction, and non-glare black finish. Made in the U.S.A.

• Cuts soft wire up to 20 AWG (0.8mm)
• Serrated Jaws for Better Gripping
• Comfortable Shock Absorbing Grips
• All Purpose Electronic Flushcutter and Needle-Nose Pliers

User questions & answers

Question:	Is there a warranty on them
Answer:	I just bought and installed this fence on an old Craftsman table saw model 113.298030 and I had to drill 1 hole for the back rail. The 3 other bolts, 1 more on the back and 2 for the front tube fit perfectly. Overall, very easy to install. Only complaint is the need to de-burr everything before installing. Not too big of a deal though. I would recommend this fence to my friends.

Product description

Button pliers. Designed for construction and maintenance of wire fencing. Flat nose with 3 wire cutters, pipe grips, teeth in extreme tip of nose.

• Button Pliers
• Designed for construction and maintenance of wire fencing
• Flat nose with 3 wire Cutters, pipe grips, teeth in extreme tip of nose

User questions & answers

Question:	country of origin
Answer:	Don't know, but I see no reason the clear version wouldn,t be backlit. All my Sangeons have a backlight when turned on AND when turned off. A big waste in battery power to my mind.
Question:	Does it have the grove for hog rings
Answer:	I am not sure of how your Delta saw is configured. I can't imagine a Delta saw not being in the front of the line with regard to saws that Vega would want to accommadate. I ordered the Vega system for my early 70's Craftsman 10 inch saw and ,"Yes" I was nervous since I did not take the price of the system lightly. I ordered the unit and when it arrived I was intimidated for a very brief period. Once I started the install, I became very confident that the unit would work with my saw. The Vega system is so universal that it would be difficult to not be able to install it on almost any saw. The most that may be needed on most saws may be to drill a hole or two in the saw base (table) . Once installed on my saw, I calibrated the fence and when that was done, I could use the calibrations on the Vega Fenceto make very accurate cuts. The Vega system has been one of my better investments in woodworking. Not sure I have answered your particular question but I believe in theVega system after having used it.
Question:	what is meant by "button
Answer:	I don't know. The mounting hardware is very versatile so if you're willing possibly do some drilling, you can probably make it fit. I think that you must have good access under the table to get the holes drilled and bolts in. On a separate note, I'd not recommend the 50" fence because it's unnecessarily large. If I were doing it again I'd get the 42". It's amazing how much floor space the extra 8" gobbles up. It is a great fence. Sorry I couldn't be more helpful.

Product description

Crescent locking pliers are made to an exacting standard that results in a durable, long-lived tool. They meet stringent ASME B107. 24 and B107. 36 standards as applicable, including proven strength and maximum jaw opening capacity. All Crescent locking pliers have a plastisol grip trigger release for easier opening and large hex key recess when additional leverage is needed for tightening. Head and body also have a narrow profile necessary for work in tight and confined spaces.

• 5 piece set includes 5, 7, and 10 inch curved jaw locking pliers, plus 6 and 9 inch long nose locking pliers
• Versatile curved jaw also features integral wire cutter
• Plastisol dip on release lever for improved comfort
• Adjust the pliers by winding the bottom screw from the hex key receiving hole
• Angled tooth pattern for a better grip
• Nickel-plated finish resists rust and corrosion
• Compound action for powerful non-slip locking grip

User questions & answers

Question:	Carry case or bag included
Answer:	No bag or carrying case.
Question:	Ive have been ripped of so many times on junk vise grips...lowes had to have to worse set ever..are these good quality
Answer:	These a decent quality
Question:	Made in usa
Answer:	China
Question:	Where are these manufactured? I don't buy Chinese tools
Answer:	I only buy tools made of chinesium when forced to. Proto and Channel Lock still seem to made here. I wanted a 15" Crescent wrench. Shocked to they are made in China. So I bought a Proto.

Product features

Crescent Locking Pliers

Crescent locking pliers are made to an exacting standard that results in a durable, long-lived tool. They meet stringent ASME B107.24 and B107.36 standards as applicable, including proven strength and maximum jaw opening capacity. All Crescent locking pliers have a plastisol grip trigger release for easier opening and large hex key recess when additional leverage is needed for tightening. The head and body also have a narrow profile necessary for work in tight and confined spaces.

Updated design for greater comfort and performance

• Red plastisol-dipped lever is more comfortable to use
• Deep-ribbed knurl pattern is easier to grip and turn

Product description

The Crescent plier line has Tongue and Groove, slip joint, and solid joint styles all in the most common sizes. They are made from alloy steel providing the strength and durability needed for professional, industrial, and at home uses. The tongue and Groove and solid joint styles both have a non-slip grip allowing for user safety and hand comfort. The Crescent line of pliers are made for gripping, twisting, cutting, stripping, or bending wire and cable in professional, industrial, and at home uses.

• Designed for work in tight, narrow areas
• Long needle nose with excellent gripping ability
• Made of forged alloy tool steel and individually tested for strength
• Polished head
• Red Double Dipped cushion handle grips

Product description

This set includes the Crescent 9" Pro Series Linesman's pliers, and 8" Pro Series Diagonal pliers. Increase your cutting and gripping power by 50% with the compound-leverage design of these Crescent Pro-Series pliers. Crescent pliers have a chrome vanadium steel construction for increased durability and co-molded grips for added comfort and control.

• Set includes 8" Pro Series Linesman's and diagonal Pliers
• Co-molded grips for added comfort
• The compound joint design uses leverage to double cutting and gripping force
• Chrome vanadium steel provides incredible durability
• Heat-treated rivet in the joint for smooth and consistent operation
• Induction-hardened edges for a long cutting life
• 1/3 lighter than standard pliers for reduced fatigue
• 1/2 inch jaw clearance