14 best hurricane pliers

Product description

Hurricane offers a broad selection of rods, reels, combos, tackle and accessories that saltwater anglers turn to for high-quality, great performance, and exceptional value. We combine high-end technology and countless hours of on-water experience to meet the specific needs of the inshore, back country, offshore and Blue water anglers.

• Package length: 3.3 cm
• Package width: 6.7 cm
• Package height: 22.2 cm
• Product Type: FISHING EQUIPMENT

• Double-Dipped grip for Superior Comfort
• Bend, Seam or Flatten Sheet Metal
• Casting Jaws are Marked in 1/4 in. bending increments
• Heavy Duty All Steel Construction with Nickel Plated Finish for Durability

User questions & answers

Question:	What if a little thicker than sheet metal
Answer:	We need to make sure the strength of the seamer. So the size is that.
Question:	will this work for flattening/unbending a 90-degree bend in copper sheet
Answer:	Yes, but you should anneal it (torch) and hammer it flat after, then anneal it again. Work hardened metal can break, annealing relaxes, softens the metal.
Question:	Will this work on barn metal that's not flat but has raised edges
Answer:	I haven’t it on that type of metal but I’m 99% sure it will not
Question:	Can this bend more than 1in ? I need a 24in bend
Answer:	No not really. You need a bending brake for more than 1". This tool is designed for edges.

Product features

About Hurricane 6 Inch Jaw Straight Sheet Metal Seamer

Hurricane 6 Inch Jaw Straight Sheet Metal Seamer Ergonomic Handle is a powerful tool for bending or flattening sheet metal by hand.

It utilizes an optimal handle span to deliver maximum power from an ergonomic operating range, and features non-slip cushion grips for superior comfort and control.

Bend, Seam and Flatten

Ideal for Bending and Flattening Sheet Metal

Double-Dipped Grip

Double-Dipped Grip Handle allows for improved comfort and maximum control.

Easy-Read Markings

Both clamping surfaces are designed with gaps for versatility and best results,Markings on the sides of the hand seamers make it easy to get precise results.

Product description

The Midwest Snips product line includes the largest offering of sheet metal bending and folding hand tools available to HVAC/R and building material distributors and tradesmen. Manufactured by Midwest Tool And Cutlery Company to the highest tradesmen quality standards, and all made in USA. The MWT-S36 includes 3-inch seamer and 6-inch interchangeable blades.

• STRAIGHT HANDLE SEAMER - Use to bend or form sheet metal and other pliable sheet materials. 1-1/4" throat depth with 1/4" depth graduations
• INTERCHANGEABLE BLADES - Includes 3" and 6" interchangable forged seamer blades with quick change over
• HEAVY DUTY COMPONENTS - Blades and handles are hot drop-forged of high carbon steel for strength and durability
• STRONGEST HANDLES - High Tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force
• COMFORTABLE GRIPS - Kush'N-Power grips conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage

User questions & answers

Question:	Do the 5, 9 and 12 inch blades fit these? And are the blades sold separately, without the grips if so
Answer:	Hello, Thank you for your interest in the Midwest 3 inch Offset Forged Blade Seamer. Only the 3 and 6 inch blade will work for model MWT-S2. We do not sell the blades separately at this time. Thank you again and have a great day!
Question:	I bend metal for window wrapping, the Stanley benders i have now didn't give me a crisp bend, would these give me a better bend
Answer:	I use Midwest religiously bending metal roofing panels, as well as the Stanley product. However, if your looking for a crisp, sharp crease, try the AMERIMAX (depending on the type and gauge of metal; 26ga. no prob., 24ga.,will but tool is aluminum and stresses a bit, as I'm bending steel). Comes with 10", 6", and 3" blades. I'd stake my oath on them🍻
Question:	Are the inside of the blades a smooth surface, or are they a rigid/grooved/textured
Answer:	The ones I received are smooth inside.

Product features

Excellent Metal Bending from Midwest Tool and Cutlery

Manufacturing metal cutting snips and related hand tools since 1945, Midwest has operated with a professional and high quality mindset. Midwest has developed and owned numerous product designs that enhance the USA made product performance. Bending and folding tools are equipped with comfortable handles and a durable design for long life for whatever job is at hand. With quality and durability at hand, the Midwest seamers are made to last.

Product description

These IRWIN VISE-GRIP Original 7CR 7-inch Curved-Jaw Locking Pliers have a self-energizing lower jaw to provide more gripping power with no slipping or stripping. IRWIN pliers provide maximum torque without requiring heavy input pressure, utilizing a jaw mechanism that naturally grips tighter as more torque is applied to the tool. A classic trigger release provides maximum locking force, and a curved jaw puts tremendous pressure on 4 points of most nuts and bolt heads, making the curved-jaw locking pliers perfect for maximum-torque applications.

From the Manufacturer

The Irwin Tools 4935578 7CR Traditional Curved Jaw 7" / 250 mm - Locking Plier features a patented curved jaw that is great for securely gripping and torquing multiple surfaces shapes, such as round pipe, square and hex fasteners and much more. The New CR features a self energizing lower jaw that pivots to allow jaw to allign on work pieces for maximum grip without slipping or stripping. This new tool features 3X the gripping power versus traditional locking pliers.

• IRWIN VISE-GRIP locking pliers use a self-energizing lower jaw for gripping power without slipping or stripping
• IRWIN pliers provide maximum torque without requiring heavy input pressure
• IRWIN locking pliers feature a classic trigger release that provides maximum locking force
• Curved-jaw locking pliers put tremendous pressure on 4 points of any style nut or bolt head, making it perfect for any application that requires maximum torque
• Constructed of high-grade, heat-treated alloy steel for maximum toughness and durability
• IRWIN VISE-GRIP locking pliers use a self-energizing lower jaw for gripping power without slipping or stripping
• IRWIN pliers provide maximum torque without requiring heavy input pressure

Product description

Made In Wuppertal-Cronenberg, Germany. In Addition To Quality, Innovation And Performance, Other Important Cornerstones Are Sustainable Actions And Value-Guided Orientation.

From the Manufacturer

A tool designed with your hand in mind. Even more power for easier working! KNIPEX quality-engineered and manufactured in Germany. KNIPEX’s Locking Pliers holds round, section and flat material securely. This heavy duty model features an adjustment screw and release lever and is perfect for one-handed operation. This tool also allows high clamping pressure due to its toggle lever action. KNIPEX specializes in the development and production of high-quality pliers and is Europe's leading manufacturer of these products. It all started back in 1882 when C. Gustav Putsch set up his own forge shop in Cronenberg (now a suburb of Wuppertal). We are an independent fourth-generation family company. KNIPEX concentrates our knowledge and expertise on pliers. This is the only way to justify our claim that we are the best supplier in terms of quality, innovation and efficiency. Our success is assured by 800 qualified employees and we attach the greatest importance to their basic and advanced training.

• Precision Grade Performance Tools
• The Number 1 Choice Of Tradesman Worldwide
• Comfortable In Use And Quality Assured Design
• Fit To Match The Needs In The Shop, At Home Or In The Service Field
• Each Tool Is Proven And Tested For Durability And Function In Real World Use And Conditions

User questions & answers

Question:	Is the screw supposed to come out
Answer:	It would if it was loosened and all the way for some reason

Product features

Knipex 4104250, 10-Inch Round Jaw Locking Pliers

Knipex heavy duty grip pliers are ideal for gripping and locking onto round or flat materials. The body of these pliers is crafted from high strength rolled steel while the jaws are crafted from chrome vanadium electric steel for added strength. They feature an adjustment screw and release lever that provides high clamping pressure due to the toggle lever action. These pliers can easily operate with one hand making them useful in a variety of conditions.

Quality in Every Detail

Sometimes we give our pliers a really hard time. We try to destroy them to find out what makes them good and long-lasting. Because we don't want to leave anything to chance, we take a long, careful look.

The steel Knipex uses is precisely hardened with a maximum of 0.8% carbon and defined parts of chromium and vanadium, guaranteeing optimum cutting performance and service life — even though it requires special production and costs a bit more. But our high product demands require this.

Knipex also looks closely at the small details. The angles, the sharpness, the hardness, the toughness of the cutting edges. The precision and smooth movement of the joint. The handle design and the finish. We keep reviewing these subjects, we research, we test, and we improve our pliers.

Product description

Door/Window Permanent Hurricane Anchoring Kit. for use with shutter systems, plywood and metal panels. Kit contains: (40) 2-1/4" White Anchors, (40) 1/4-20 Washer Base Wing Nuts, (40) 1/4-20 White Vinyl Screw Protectors, 3/16" Hex Nut Driver, 3/16" x 4-1/2" Drill Bit. For Installation into concrete a 7/32" Drill Bit is needed but not included in package.

• Hardware for 40 anchor points per kit
• Hex nut driver included
• Vinyl Screw Protectors for when shutters or plywood not installed
• 3/16" x 4-1/2" Drill Bit For Masonry/ Hollow Block Installation
• 1/4" x 2-1/4" Anchors

User questions & answers

Question:	What size (diameter) are these? #8? #10? I ask because the installation spacing varies per Florida code for wood frame installs
Answer:	Not sure but the screws are like a 1/4" much large than 8" or 10". The side screws into house are 2 1/4" long. The side for your wood or what ever you cover window with is little over 1".
Question:	Can these be used for mounting polycarbonate hurricane panels
Answer:	The wing nuts will clamp down on polycarbonate. You should research to determine if a larger surface area is needed for a fastener. Wingnuts are 7/8 " in diameter.
Question:	How far apart are these supposed to be spaced out? Just need to put them on top and bottom of window, correct
Answer:	Suggested installation is 12" on center for 5/8" plywood. If you are installing metal panels or shutter systems please refer to the manufacturer's spacing guidelines. Anchors should be installed on all sides, not just the top and bottom.
Question:	Will the coated carbon screws rust
Answer:	Mine haven't. Keeping them capped helps.

User questions & answers

Question:	Where does the pulp come out at
Answer:	This is a fantastic apparatus, it will really come in handy during the winter months when you are macerating the juices from ginger.........the juice come out from under the tunnel it has three small holes for the extracted juice, it can also be used for parsley......
Question:	is this easy to clean
Answer:	Yes, it is very easy to clean.
Question:	Can I use this to grind wheat berries into flour
Answer:	If the wheat berries are wet (dipped in water for couple of hours) then it will transform them into a soft milky cream, not as an actual dry flour as what you meant.
Question:	Can this juice ginger
Answer:	I am 90% sure it would do just fine juicing ginger. You want me to go give it a try?

Product features

Good Morning, Wheatgrass!

This could be waiting in your kitchen everyday!

Our Hurricane Manual Wheat Grass Juicer extracts the healthy benefits of chlorophyll from wheat grass and other leafy greens.

The Hurricane

Here at Handy Pantry, we love this juicer! It has few parts to wash and assemble, it never rusts, and it lasts a lifetime. If you are looking for a non-electric juicer for your home, RV, or off-grid operation, this is the perfect fit.

Will it fit my countertop?

Make sure that the countertop you are planning to use is less than 2 1/4" thick and has at least 1" of depth for the clamp.

Is a manual juicer really what I need?

Hand crank juicers like the Hurricane require more elbow grease than electric juicers but they are cheaper, longer lasting, and can be used practically anywhere.

Is a manual juicer fast enough for me?

Our juicer makes approximately 1oz. of wheatgrass juice per minute.

• Aviation Aluminum
• Imported
• Aluminum and Corrosion Resistant: Lixada Fishing aluminum fishing pliers made of from 6061 aviation aluminum body and stainless steel jaw for saltwater or freshwater environments. No rust ,No corrosion any more.
• Braided Line Cutter: This fishing pliers scissors can cut fishing line and remove the hook, perfect for slicing through tough braided line, very helpful tool for fishermen.
• Inset Stainless Steel jaws: Coated carbon stainless steel inserts not only give the jaws ultimate strength and durability,but also the serrated jaws grip tight to remove hooks and protect you hand don¡¯t hurt by triple fishhook.
• Easy Use,Easy Carry: Spring loaded handle for easy one handed use,we plus a steel wire coiled lanyard and nylon holster to always keep this handy tool within easy reach and security.
• Quality Assurance: Lixada Fishing pliers total length reach 7.87 inches which not only long than others,but the wire coiled lanyard Maximum withstand tension reached 40 lbs when others can not afford even 12 lbs.

User questions & answers

Question:	How does the sheath attach
Answer:	belt loop or by a carabiner
Question:	Is there a way to keep them closed? The ones I have only stay in open position
Answer:	No the only way to keep them closed is if they are in the sheath! Great set of pliers!
Question:	How does the sheath attach
Answer:	Sheath attached with strap but mine tears up its stitches and discard it.
Question:	What's country of origin
Answer:	China

Product features

The BEST Fishing Pliers From Lixada

• Made of aviation grade aluminum, which makes it resistant to corrosion. You can use it even in salty without having to worry about rusting.
• The split ring design will allow you to remove it easily from the hook eye or lure.
• The ergonomic design causes it to fit comfortably into your hands, giving you a firm grip.
• This comes as a complete package as it includes a fishing pliers, sheath, and lanyard.

5-in-1 Fishing Pliers

• Cut Fishing Line
• Hook Remover
• Crimp Sleeves
• Crimp Leads
• Split Ring Opener

Premium Quality Lanyard and Sheath

• This comes as a complete package as it includes a fishing pliers, sheath, and lanyard.You can use it even in salty without having to worry about rusting.

Easy to Carry & Use

• This set of pliers is also quite light making it easier to use, without any strain.

7.87 Inch(aviation grade aluminum)

7.3 Inch(stainless steel)

7.1 Inch(6061 aviation aluminum)

Product description

Applications

The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.

Environment

The anchor is designed for use in a Moist environment.

Head Style

The anchor is a head

Hole Diameter/Bit Diameter

The anchor requires a 1/2" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required

A is required for driving the anchor into the base material.

Diameter of Anchor

The diameter of the anchor is 1/4".

Length Anchor

The length of the anchor is 7/8"

Thread Length

The length of the threads on the anchor is in length.

Minimum Embedment

The minimum anchor embedment into the concrete is 7/8". Therefore, the anchor must be installed so that a minimum of 7/8" of the anchor is embedded into the concrete.

Maximum Fixture Thickness

The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8" will be met.

Fixture Hole Diameter

The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 9/16".

Spacing between Anchors

Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.

Edge Distance

It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.

• SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
• NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
• INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
• REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor

User questions & answers

Question:	Will these work in a tile floor? I need to firmly attach a steel plate to the tile surface with 1/4-20 bolts
Answer:	You will not fasten anything to the tile. You need to anchor to whatever is below the tile - wood or concrete. If concrete, you could use these, but you would have to drill the tile out with special bits first and then the hole for the anchors. If it's wood, I would use 1/4" toggles with break-offs.
Question:	Would this anchor work in a hole drilled in steel, or anything other than masonry
Answer:	We have only tested these in brick, block and solid concrete. Therefore we cannot recommend their use in steel.
Question:	will it work in a stucco wall
Answer:	No, these anchors will only work in solid concrete.
Question:	is a regular masonry drill bit ok to use? I read someone suggested a step drill bit? I have never used one in masonry or concrete. Thanks
Answer:	Yes, a regular masonry bit should be used.

• DURABLE TOOL BAG - This tool bag is made from 600D polyester fabric which provides unmatched durability and reliability. This fabric with fine stitching of the entire tool body makes the bag extremely tough and long-lasting. It guarantees your bag to be away from damage or breaking in any working condition.
• MULTI-POCKETS AND LARGE INNER SPACE- Our tool bag boasts 8 sturdy pockets outside, 10 inner pockets for versatile storage of pliers, wrenches, hammer and other tools. It keeps everything organized and safe, makes your job more convenient and no more digging through the bag. Bag Size:16” x 10-1/2” x 8-1/2”
• WIDE OPEN MOUTH -This tool bag features wide open mouth with an internal metal frame easy for you check things inside and easy access to store items.
• WATER-PROOF BASE AND FABRIC – The hard molded plastic base and waterproof fabric keeps your bag clean and dry.
• COMFORTABLE TO CARRY: This tool bag is comfortable to carry with an adjustable shoulder strap HEAVY-DUTY ZIPPERS: The zipper system is extra-long and smooth, letting you pack this bag tight and still able to close it with the help of the robustly constructed metal zippers

Product features

Hurricane 16 Inch Wide Mouth Tool Bag with Water Proof Rubber Base

The Hurricane 16-inch Top Wide Mouth Tool Bag is constructed with rugged polyester fabric and will stand the test of time. There are 8 pockets outside, 3 along each side, 2 along the two ends. 12 inner pockets,6 along each side. Tools stay organized and easy to find with a variety of different sized pockets and loops, and an internal metal frame that provides structure to easily get in and out without the bag collapsing on itself.

Easy To Carry

Zipper tool organizer is very convenient to carry. Take it by your way with many ways for you to choose. Adjustable strap for comfortable carrying Padded handles.

Size

Tools are easily and conveniently organized and accessible due to stay-open top while using.(open with a wide mouth for easy organization and access)

Convenient Interior Zipped Pocket

Tool bag has 12-internal pockets and 8-external pockets Pockets including one zippered pocket to secure valuables as well as improve accessibility.

Base

Rigid and waterproof plastic base, with the sturdy bottom is the tool bag waterproof for protecting hand tools, and is steady while taking and placing.

Holds Everything You Need

There are 8 sturdy pockets outside, 12 inner pockets for versatile storage of pliers, wrenches, hammer and other tools.

• ♐Best Gifts for Men--I guess you may not know what to send as a gift on Father's Day or Christmas, what to send to your children on the birthday, or what to send to your boyfriend on Valentine's Day. This 20-in-1 survival kit is the best choice. It is portable and lightweight and it contains many cool and useful items. Your dad, children or boyfriend will surely like it.
• ♐Platinum & Unique Survival Tools It Contains--Neck gaiter, can also be used as a headband, balaclava, cap, hood, wristband, etc; Multitool plier with regular plier, wire cutter, knife, phillips screwdriver, bottle opener, saw, nail file, can opener, etc; Glow sticks, perfect for emergencies, blackouts, camping and parties; Fire bellows, long enough to protect your face, hands, hair from getting burnt; Hemp wick, fire easy in a wet place.
• ♐20 Essential Items & Affordable--It is not easy to buy 20-in-1 Emergency survival kits at such low costs: neck gaiter, multitool pliers, glow sticks, fire bellows, tactical pen, paracord bracelet, survival knife, fishhook card, hemp wick, water bottle buckle, emergency blanket, flintstone firestarter, flashlight, waterproof box, etc. This 20 in 1 survival gear contains almost everything you need when in an emergency like a natural disaster or wilderness adventure.
• ♐Upgraded Bigger Case & Lightweight--Dimensions 7.5*4.5*2.7 inches, the upgraded case is bigger than normal ones and can hold more items, and it is easier to get all items organized. You never need to worry about not being able to get everything back after opening it. Weight only 1.4 pounds. This extremely useful kit can be placed in a backpack, car, drawers, pocket or pouch, or securely attached with the included rope to your belt, rucksack strap, climbing gear or mountain bike.
• ♐Top Service--Quality and customer satisfaction are our top priorities. If gifts don’t live up to your expectations, please contact us and we will solve it to make sure that you are happy with your purchase.

Product features

What will you get?

1*Multitool Plier:Contain pliers, wire cutter, knife, screwdriver, bottle opener, saw, can opener, nail file

1*Neck Gaiter:Can also be used as a headband, balaclava, cap, hood, wristband, etc

2*Glow Sticks:TWO COLORS(Random Combo), perfect for emergencies, blackouts, camping and parties

1*Fire Bellow:Long enough to protect your face, hands, hair from getting burnt

1*Fishhook Card:Contain 22 kinds of fishing and hunting tools & 2*Rolls Tinder Rope: Fire easy in the wet place

1*Paracord Bracelet: Contain fire starter, compass, whistle, emergency knife and paracord

1*Upgraded Survival Knife: Very sharp & 1*Tactical Pen:Can be used to break the glass and write

1*Flashlight:3 lighting modes, can work for a few hours with just one AA battery (BATTERY NOT INCLUDED)

1*Whistle:Can let the rescue team find you faster & 1*Wire Saw: Can be used for cutting wood, plastic, soft metal

1*Water Bottle Buckle: Can be used to securely attach water bottles to your camping backpack

1*Emergency Thermal Blanket: Waterproof, windproof, and moisture-proof

1*Flint Fire Starter:Attached is a Striker that has a concave tinder scraper, ruler, bottle opener and lastly a hex wrench

1*Multi-Use Spoon Fork: Multifunctional and can be used as a spoon, fork, knife and bottle opener

1*Multitool Card: Can be used as a can opener, knife edge, screwdriver, ruler, wrench, saw blade, direction ancillary indication, lanyard hole

1*Upgraded Bigger Case:Can hold more things, repacking the case will become more easy

• Multifunctional: muti-pliers can be used as wire stripper also works as a wire cutter,Pliers.
• Handle made by environmental PP+TPR materials,proTouch grips provide extra comfort and reduces hand fatigue.
• Easy to use: High-Leverage design save your force when you use this pliers, tool joint have reserved reasonable gaps to reduce friction loss. the wire stripper can be loosened with a screwdriver and and adjusted it with your finger if it out of alignment.
• Long service life: Durable nickel chromium steel construction and Induction hardened cutting edge stays sharper.
• Ideal for removing stripped or special screws and bolts of larger sizes,

Product features

What advantage do this pliers have?

What's this Lineman's Pliers can do?

3 Different Functional Pliers, Choose What You Need.

Lineman's Pliers cut, bend, and may be used

to strip wire insulation or cable jackets.

can be used to bend or straighten solid wire or sheet metal components.

Product description

Klein Tools makes some of the world's finest pliers. These High-Leverage, Side-Cutting Pliers features a rivet closer to the cutting edge which provides 46% more cutting and gripping power than other pliers. Induction hardened cutting knives are extra durable for longer life. Pliers handle tempering absorbs the "snap" when cutting wire. Knife is induction hardened to deliver precise cut. Cutting pliers knives are induction hardened for long life. Precision-hardened plier head for on-the-job toughness. Plastic-dipped handles for comfort and ease of identification. ''Handform'' handles for full gripping and cutting power. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

The Klein Tools 9-Inch High-Leverage Side Cutting Pliers feature a forged, hot-riveted, and heat-treated design that assures long lasting performance and accurate alignment. Blue plastic-dipped handles are featured for added comfort, and the high-leverage design provides 46-percent greater cutting and gripping power than conventional pliers. Other highlighted features include a streamlined design with sure-gripping, crosshatched knurled jaws, and a New England nose type. The pliers are made in the United States and come backed with a limited lifetime warranty.

From the Manufacturer

Klein specializes in the making of the world's finest pliers¿pliers that professionals trust completely. Klein pliers feel right and work right. They are job-matched for every kind of work you do; designed and built to exceptional quality standards in a tradition that dates back to 1857 "Handform" handles for full gripping and cutting power. Precision-hardened plier head for on-the-job toughness. Plastic-dipped handles for comfort and ease of identification.

• High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other plier designs
• Hot-riveted joint ensures smooth action and no handle wobble
• Induction hardened cutting knives for long life
• Streamlined design with sure-gripping, cross-hatched knurled jaws
• Unique handle tempering helps absorb the ''snap'' when cutting wire

User questions & answers

Question:	Do these cut acsr
Answer:	I have not personally cut acsr with them. Though they are strong, and ive cut through and twisted multiple 12/2 electrical wire at once, i wouldnt recommend them for acsr. If you were to try it, i wouldnt try it anything bigger than 6AL/1St. But it would probably still be a bit tough to do.
Question:	Anyone have any issues with rusting/seizing? I do a lot of metal work so I quench in water briefly and I'm sick of pliers seizing on me
Answer:	I live in a part of Texas with high humidity, so I also have a problem with tools seizing from rust. Once the original finish is penetrated, not much will stop it, but for my precision tools I give them an occasional shot of penetrating oil and have found soaking them (open jawed) in the same will save most and free up even seized units with some working of the hinges.
Question:	Do these have a lifetime warranty
Answer:	Yes Klein has a lifetime warranty and Home Depot honors it.
Question:	How do these compare to Knipex linesman pliers
Answer:	I use my pliers everyday I bought a pair of knipex from Amazon and thought from what everyone said knipex were better but after using them for about six months I’ve been having issues with them so I will be purchasing another pair of Klein’s.

Product features

High Leverage Pliers, 9-Inch Side Cutters with 46-Percent More Gripping Power than Other Pliers

Klein Tools makes some of the world's finest pliers. These High-Leverage, Side-Cutting Pliers features a rivet closer to the cutting edge which provides 46% more cutting and gripping power than other pliers. Induction hardened cutting knives are extra durable for longer life.

• 11" Nail puller
• Made From High Carbon Steel For Long Lasting Performance And Preventing Rust
• Soft Plastic Coated Grip
• Easily Remove Nails, Even With Damaged Head, From Wood
• Perfect For Carpenters, Construction, Handymen, Installing New Floor, Etc.

User questions & answers

Question:	Would this pull bent headliess nails--like large stapes--through the wood at the top of a cabinet? I'm fixing a bad renovation
Answer:	yes a finish nail with a head diameter that fits in the tube. Half inch board is no sweat.

Product features

LONG LASTING TOOL!

This Bates Nail Puller Pliers 11" is made from high carbon steel for long lasting performance and prevent from rusting.You can use Bates pliers for carpenters pincer cutting pliers to cut nails or pull them out from board. You can remove panel pins, remove nails from molding without damaging your trim pieces. It is a must have if you are planning to rip off old carpet or install wood floors. Bates nail pullers are a great tool for fixing framing mistakes without causing excessive damage to the wood piece. Bates nail pullers are specially made to pull out unnecessary nails even the nails head goes under the workpieces or any surfaces.

LONG LASTING TOOL!

LONG LASTING TOOL!

This Bates Nail Puller Pliers 11" is made from high carbon steel for long lasting performance and prevent from rusting.You can use Bates pliers for carpenters pincer cutting pliers to cut nails or pull them out from board. You can remove panel pins, remove nails from molding without damaging your trim pieces. It is a must have if you are planning to rip off old carpet or install wood floors. Bates nail pullers are a great tool for fixing framing mistakes without causing excessive damage to the wood piece. Bates nail pullers are specially made to pull out unnecessary nails even the nails head goes under the workpieces or any surfaces.

LONG LASTING TOOL!

This Bates Nail Puller Pliers 11" is made from high carbon steel for long lasting performance and prevent from rusting.You can use Bates pliers for carpenters pincer cutting pliers to cut nails or pull them out from board. You can remove panel pins, remove nails from molding without damaging your trim pieces. It is a must have if you are planning to rip off old carpet or install wood floors. Bates nail pullers are a great tool for fixing framing mistakes without causing excessive damage to the wood piece. Bates nail pullers are specially made to pull out unnecessary nails even the nails head goes under the workpieces or any surfaces.

BATES CHOICE

In an age where products are constantly enhancing, Bates Choice Nail Puller Pliers will continue to advance as well. Not because they aren't already superior, but because greatness is a process, and a process that Bates Choice will continue to strive for to give you the best product.