8 best petrol multi tool

Product description

HIAORS Trimmer Brush Cutter Petrol Fuel Tank Seal Pipe 43cc 49cc 52cc CG430 520 Engine Garden Multi Tool Fuel Tank Assembly for 2 Stroke 43cc 47cc 49cc Engines

• Trimmer Brush Cutter Petrol Fuel Tank Seal Pipe 43cc 49cc 52cc CG430 520 Engine Garden Multi Tool Fuel Tank Assembly
• Distance between the mounting holes (centre to centre) : 98mm
• Size: approx.24.5 x 13.5 x 11.5cm (9.6 x 5.3 x 4.5inch)
• Please make sure that your original part matches with the measurement above

User questions & answers

Question:	Would this work on a Louisville fiberglass ladder without drilling holes
Answer:	Yes, it is about 32 1/4 inches tall. It goes well with our dining table which is 29 3/4 inches tall.
Question:	Why cannot this ladder stabilizer be used on an aluminum ladder by drilling appropriate holes
Answer:	You can google the item and model number and see what comes up.
Question:	Which models of Werner fiberglass ladders does this fit
Answer:	I actually mounted on a separate wall in dining room above my wine fridge
Question:	How wide is this v rung from bracket to bracket
Answer:	11 1/2 inches from front to back. 16 3/4 inches wide.
Question:	how much does the ladder weigh
Answer:	Can't give you the measurements as I have already gifted the item, with a typical sized bottle of wine. It was roomy inside, but don't know if it would accommodate a larger bottle. Hope this helps.

Product description

Taking design cues from the original, the suspension-next is the evolution of a classic. Boasting an increased tool count of 15 in a lighter, thinner design, it fits comfortably Clipped in a pocket, or on a belt.  New to the suspension-next is a wire stripper, medium flathead driver, awl, file, and ruler but the benchmark  features remain: all outboard tools, all locking tools, and spring-loaded jaws.

• While still up to the challenge of the professional tradesman, the slimmer design and focused tool pack are ideal for EDC user
• Successful features of the Suspension remain: all outboard tools, all locking tools, and spring-loaded jaws
• New features to the Suspension-NXT include: wire stripper, medium flathead driver, awl, file, and ruler
• The needle nose pliers are spring-loaded to lessen hand fatigue for the user
• The sturdy pocket clip allows the tool to rest deep in pocket or securely on belt when not in use

User questions & answers

Question:	What are the dementions of this tool? it says 1x.5x3 but the video makes it look much larger. am i missing something? i'd like a small pocket multi
Answer:	I measure it at 10.5cm x 4.3 cm x 1.7 cm (+.3cm with clip) This is everything closed up.
Question:	Can the pocket clip be removed or switched around
Answer:	Yes it can be removed or switched to the opposite side. A side note: I collect knives and multi-tools; this Suspension EXT is in the top three that I have out of 400 (ish) I have.
Question:	Think the wire cutters could cut through a coat hanger wire with ease
Answer:	It will do the job, but a multi-tool with exchangable cutting blades would be a better choice.
Question:	Is this made in the USA
Answer:	Gerber does have many tools made in the USA, however you’ll find that their budget options (like the NXT) are made in China.

Product features

Slim Design

Taking design cues from the original, the Suspension-NXT is the evolution of the classic multi-tool design. The slim butterfly design features outboard tools that are accessible in a snap when unexpected tasks come up.

Pocket Clip

The benchmark qualities that made the original a success still remain, now optimized for the everyday carry consumer. The sturdy pocket clip allows the tool to rest deep in pocket or securely on belt when not in use.

Spring-Loaded Pliers

The needlenose pliers are spring-loaded to lessen hand fatigue for the user.

Product description

We took the standard keychain multi-tool and made it better. In addition to stainless steel pliers, wire cutters, a fine edge blade, spring-loaded scissors, flathead screwdriver, crosshead driver, tweezers and file, the Dime includes a unique blade designed to safely cut and score plastic packaging and a bottle opener that is exposed even when the tool is closed. Compact and lightweight, the Dime is the most valuable change you'll find in your pocket.

• Sturdy stainless steel construction
• Compact, lightweight size fits perfectly in pocket - a daily companion for any task
• 10 tools: Needle nose spring-loaded pliers, Wire cutter, Fine edge blade, Retail package opener, Scissors, Medium flat driver, Crosshead driver, Bottle opener, Tweezers, File
• Convenient, easily accessible butterfly opening
• Overall length: 4.25 inches, Closed Length: 2.75 inches

User questions & answers

Question:	Does the knife come with case
Answer:	Yes. There are two bits, each with a standard and Phillips head tip. The smaller Phillips will work for the hard drive screws.
Question:	where is it made
Answer:	Order new tips or find a local retailer that can help. Klein is unfortunately very fragile when it comes to to their tools. They break frequently under normal use.
Question:	Does this have a clip for your pocket like the crucial for example
Answer:	no
Question:	where is this product made
Answer:	There is no voltage rating, just be sure the power off before using. This is a small tip screwdriver to be used on terminal blocks.

Product features

Dime Multi-Tool

The idea is simple: always be prepared. The Dime is a mini multi-tool with an impressive list of features, ensuring you are ready for anything. This butterfly open tool fits on your keychain yet has 12 useful tools. Available in multiple colors and a bladeless version as well.

Components

We took the standard keychain multi-tool and made it better. In addition to stainless steel pliers, wire cutters, a fine edge blade, spring-loaded scissors, flathead screwdriver, crosshead driver, tweezers and file, the Dime includes a unique blade designed to safely cut and score plastic packaging and a bottle opener that is exposed even when the tool is closed.

• It can help you fix most Problems of Your Bike With This Kit
• With good quality, durable, full function
• Allen Keys: 2, 2.5, 3, 4, 5, 6
• 16 function all in one tool:Socket Hex Wrench 8/9/10/mm,Slotted Screwdriver,Phillips Screwdriver,Socket Extension Rod,Solid Wrench 8/10/15/mm,Hex Key Wrench 2/2.5/3/4/5/6mm,Spoke Wrench;
• 3 pcs Nylon pry tire rods, Ideal Thanksgiving and Christmas Gift for Cyclists

User questions & answers

Question:	Do you sell to spain
Answer:	This tool kit was made in Taiwan. I have used it several times and it is made with quaility materials. In fact, this is how Craftsman tools was once made decades ago. Check out my review. I would recommend buying this tool kit if you do any bicycle work yourself.
Question:	What type of material are the tools made of
Answer:	Yes. It has a 15mm pedal wrench.
Question:	Does it come with a bag
Answer:	Hello, this bike tool kit includes: Chain rivet extratctor Chain ring nut wrench Crank puller Freewheel turner & lock ring wrench Bottom Bracket Wrench 15mm Pedal wrench ８mm Hex Key Wrench/ 1/2” Adaptor Multipurpose master link tool Metal tire lever（2pcs） Flat/Phillips Screwdriver 3mm Flat Screwdriver Hex Key Wrench Set(2/2.5/3/4/5/6mm) Torx Wrench（3Pcs） Hub spanner（3Pcs） Spoke Wrench Crank Cap Wrench Lock ring Remover Cartridge B.B. tool Tire Patch Kit
Question:	Does this tool help you take out your dog
Answer:	It does not have a cable cutter.

Product description

Description:

    This product is made of high quality aluminum and really durable in using, which is a perfect replacement for your worn fuel tap. This item is an in-line fuel tap for motorcycle fuel systems, and it is the best tank protectors for motorcycles. With its very simple design, the fuel tap is very easy to install.

Features:

This product is made of high quality aluminum and really durable in using. It is a perfect replacement for your worn fuel tap. This item is an in-line fuel tap for motorcycle fuel systems, and it is the best tank protectors for motorcycles. With its very simple design, the fuel tap is very easy to install.

Specifications:

Material: Aluminum

Color: Silver

Size: 4 x 4.5cm / 1.6'' x1.8''

Package Weight: 33g

Package Included:

1 x Petcock

Note:

Please allow 1-5mm error due to manual measurement. Thanks for your understanding.

• Fuel Switch Fuel Tap is made of high quality aluminum and really durable in using
• This is an in-line fuel tap for motorcycle fuel systems
• A perfect replacement for your worn fuel tap.With its very simple design, Fuel Tank Tap is very easy to install
• Fuel Switch Fuel Tap is the best tank protectors for motorcycles
• Conform to strict quality control standards, dependable to use.Manufactured according to the original specifications.Built to meet standard specification, strictly follow factory quality control.

Product description

This 80cc petrol gas engine kit is used to upgrade the regular bike to a motorized bike.



Feature:

Mode of Engine:Single cylinder, air-cooling, 2-stroke

Bore & Stroke:47mm & 40mm

Rated Power:2.5Kw/5000r/min (3 horsepower/5000r/min)

Max Power:3.5Kw/6000r/min (5-6 horsepower/6000r/min)

Ignition Mode:CDI

Model of Chain: 415

Chain Length: 110 links

Compression Ratio:6:01

Driving Ratio:18:01

Fuel Type: Gasline Premium ;Lub. Oil : motorcycle synthetic 2 stroke oil

Capacity of Tank:2L

Speed Limitation:38km/hour

Lubrication Oil: oil of 2-stroke petrol engine (Or oil for 10W/40.10W/30)

Mixing Ratio of Fuel and engine Oil:16:1 for new sets, 20: 1 after running 500km

Type of Sparking Plug:Z4C 14MM

Volume of oil Consumption:2.5L/100km

Type of Clutch:Friction Plate / Dry

Cooling Mode:Natural air cooling



Package Includes:

1x User manual

1x 80cc 2-stroke engine

1x Carburetor

1x Ignition coil & CDI

1x Throttle handlebar set

1x Throttle cable

1x Clutch cable

1x Kill switch

1x Clutch lever

1x Chain

1x Chain cover

1x 44T Sprocket W/ 9 Hole Clamp Pads

1x Chain Tensioner

1x Fuel tank, Fuel filter

1x Gasoline fuel line

1x Petcock

1x Muffler

All the needed mounting brackets, gaskets, and hardware



Note:

Starting Procedure:

1.Check that all mounting fixtures, screws, bolts,nuts and fuel pipes are tight..

2.Open the Fuel Valve and Choke Lever.

3.Press Pre-Filled Plunger two or three times on the carburetor.

4..Keep the throttle low and hold in Clutch Lever,then ride the bike as usual.

5.Release the Clutch Lever gradually.



Parking Procedure:

1.Hold in Clutch Lever.

2.Brake the bicycle.

3.Press the Kill Switch on the Throttle Handle Grip.

4.Close the Fuel Valve and Choke Lever.

5.Park your bike.

• 【80cc 2-stroke bicycle motor kit】The engine kit contains all the parts and user manual.It is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.The user manual is contained in the package.If you need the installation video, please contact us by email.One Year Warranty Covers the Motor, to Provide Parts Free.
• 【Will it fit for your bike?】Fit for most type 26 and 28 inches bikes, such as mountain bikes, road bikes,cruisers, choppers.Just a regular mens bicycle with traditional "diamond" shape frame will work.The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").The diameter of the large sprocket center hole is about 1.41 inches. Please measure the rear axle size of your bicycle first.
• 【Be assured the mixing ratio for fuel and oil】16:1 for break period (first 300-500 miles) / 20:1 after (18:1 is much better in summer because of the hot weather);air cylinder might take some time to adjust to the load. Thus to avoid possible complications for the motor, please limit the riding time to a maximum of 1 hour for the first few rides.
• 【Mode of engine】Type of Sparking Plug:Z4C 14MM;single cylinder, air-cooling, 2-stroke;Ignition Mode:CDI;model of chain:415; chain length:110 links, 55 inches.Driving ratio:18: 01,fuel type:Gasline Premium;lubrication oil: Oil for 2-stroke petrol engine (or oil for 10W/40.10W/30);bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
• 【Installation tips】The rider needs basic hardware skills, tools,and around 2-3 hours for installation and fine tuning adjustments.Add some lubricant into the air cylinder before starting.If you don't have experience or the first time on installing the motor kit,before installing,please kindly read our instruction and search "80cc bicycle engine kit" on youtube,it will give a big help and troubleshoot a lot of issues during installation process.

Product features

Starting Procedure:

1.Check that all mounting fixtures, screws, bolts,nuts and fuel pipes are tight.. 2.Open the Fuel Valve and Choke Lever. 3.Press Pre-Filled Plunger two or three times on the carburetor. 4..Keep the throttle low and hold in Clutch Lever,then ride the bike as usual. 5.Release the Clutch Lever gradually.

Parking Procedure:

1.Hold in Clutch Lever. 2.Brake the bicycle. 3.Press the Kill Switch on the Throttle Handle Grip. 4.Close the Fuel Valve and Choke Lever. 5.Park your bike.

Run-in period:

The engine needs to run in.Please limit riding time to one hour at the first few times.

• Bigger Blade Knife. Larger blade over 3” gives you more of a cutting edge as well as a more secure and comfortable grip during heavy duty cutting. It has a lock function to keep the blade from causing accidents.
• One Hand Operation. With a simple push, you can easily slide out the large blade knife in a second!! Each tool can be opened and used separately without opening the entire pliers.
• Superior Quality. POHAKU multifunctional multi-tool knives are made of high-quality stainless steel with sufficient hardness and toughness. The rust-proof and anti-corrosion high-quality steel help it last longer.
• 13-in-1. A variety of Needlenose Pliers, Standard Pliers, Wire Cutters, Multifunction Knife, Can Opener, Slotted Screwdriver (M), Slotted Screwdriver (L), Phillips Screwdriver, Bastard File, Second File, Rope Cutter, Saw and Serrated knife.
• Gift for Outdoor Activities. Pohaku multitool is a special gift for adventure seekers. If you are looking for a great gift for someone who likes outdoors survival, camping, hiking and hunting, our multi purpose tool is a perfect choice.

User questions & answers

Question:	Can we bring this on a plane
Answer:	I would call your airline choice before bringing it with you as some airlines confiscate items deemed inappropriate for flying with.
Question:	what is the size of the knife
Answer:	Tip of blade to butt is 7”. Blade is roughly 3”, handle roughly 4”
Question:	is there a holster inside the package
Answer:	It comes with a bag that connects to a belt
Question:	the size of the main knife
Answer:	2 3/4"

Product description

A practical foldable 21-in-1 multi-tool: Needle-nose plier, Combination pliers, End cutting pliers, Blade, Hexagon sleeve, Scale, Sickle, Rope-cutting knife, Bottle opener, Slotted screwdriver, Hole puncher, Can opener, Mini slotted screwdriver; 4x bits x2 functions;

• Gift for Men, Husband, Boyfriend, DIY Handyman, Father
• 【Multifunctional】A practical foldable 21-in-1 multi-tool: Needle-nose plier, Combination pliers, End cutting pliers, Blade, Hexagon sleeve, Scale, Sickle, Rope-cutting knife, Bottle opener, Slotted screwdriver, Hole puncher, Can opener, Mini slotted screwdriver; 4x bits x2 functions.
• 【Safe And Portable】Self-locking device: all tools will be automatically locked after opening, thus preventing the tools from accidentally closing during operation and avoiding hurting hands. Compact and lightweight, comes with a durable nylon bag, can be put into pocket or hung on belt.
• 【Visible High-Quality】Real shots without beautification: multi-pliers are made of hardened stainless steel. The surface is sandblasted, which makes the multifunctional pliers resistant to oxidation and corrosion in humid and harsh environments. You can enjoy its quality and durability.
• 【Subverting-Traditional Design】Touchable conscience design: Comfortable 3D machined handle texture avoids slipping. Pliers are worth every penny. Suitable for outdoor survival or indoor activities (such as garden care, DIY and daily maintenance), camping, hunting or traveling etc.
• 【Worry-Free Purchase】The package contains: 1x multi-function pliers, 4x bits set, 1x nylon bag, 1x carton. If you have any questions about the product, please contact us. (You never know when you will need one of these tools urgently. It's always right to be prepared.)

User questions & answers

Question:	Can the hex bit holder be used in L-shaped conditions? Because it ’s easier for me
Answer:	Yes the trigger allows you to control the speed. Also the manual says: No Load Speed ......................................0-3,100/min. SPM
Question:	Is it difficult to use the automatic lock
Answer:	This is for bare tool only. Batteries would have to be bought separately
Question:	If the multitool accessories are lost, are there any accessories for sale
Answer:	I think so. You can get different blades for different purposes. It has cut everything I've attempted so far.
Question:	inside the multi-pliers, is there really a built-in spring
Answer:	Mine is marked as a "refurb", works like new - not sure about returns, believe it has a 90 warranty.

Product features

21-in-1 function description:

1.Needle-Nose Pliers

2.Combination Pliers

3.End Cutting Pliers

4.Blade

5.Hexagon Sleeve

6.Scale

7.Sickle

8.Rope-Cutting Knife

9.Bottle Opener

10.Slotted Screwdriver

11.Hole Puncher / Awl

12.Can Opener

13.Mini Slotted Screwdriver

14.Saw In addition, attached 4 bits X 2 functions

Self-locking device

• to avoid the possibility of injury caused by sudden contraction;

Stainless steel handle with 3D texture

• to avoid slipping, for longer life and better gripping;

Inner spring

• installed in needle-nose pliers, to reduce user's hand fatigue;

Strong magnetic connection

• The sleeve and the head are connected by a strong magnetic force, which can be easily put in / out.

Wire tool

• for iron wire, metal wire, cable, etc.

Saw

• for sticks, boards, etc.

Blade / Knife

• for cutting fruits, vegetables, ropes, etc.
• The blade / knife is very sharp.

Screwdriver

• for loosening and tightening screws.
• the sleeve can be locked in place at 90 degrees and 180 degrees for two good driving options.

Please remember if you encountered:

Have you ever been distressed by a nail stuck into a wooden board and unable to pull it out?

Have you ever wanted to break a wire but couldn't reach it with your bare hands?

Have you ever wanted to saw off a wood for DIY by hand but found that there is no tool at hand, making the project impossible?

......

You never know when you will need one of these tools urgently. It's always right to be prepared. In fact, it has more than 21 functions, and we look forward to your new exploration!