10 best case looking pocket knives

Product description

Beautiful CASE XX 6.5 BoneStag Half Whittler



Handcrafted in the U.S.A.

CASE XX 65320 , CA65320 HALF WHITTLER BONESTAG 6.5208 SS



This handsome new knife has never been used or re-sharpened, and comes with a Limited Lifetime Manufacturer's Warranty. It is 3 1/4 inches long(folded/closed) and weighs approximately 1.6 ounces. The blade material is Tru-Sharp Surgical Stainless Steel. The handle is 6.5 BoneStag with an Oval Nickel Silver Script Inlay shield. The bolsters are highly polished Nickel Silver. So, if you're looking for a great knife to collect, carry, or give as a gift... don't pass this one up!

• Blades: Stainless Steel Clip And Pen
• Length Closed: 3 1/4 Inches
• Great everyday pocket knife for projects around the house, the outdoors, and hunting
• Made In Bradford, PA. USA
• Manufacture's Limited Lifetime Warranty

Product description

WR Case XX Pocket Knife 25337 Canoe Smooth Red Pearl Kirinite

• Blade Material: Tru-Sharp Surgical Stainless Steel
• Handle Material: Red Pearl Kirinite
• Knife Length: 3 5/8 Inches(folded/closed)
• Country of Manufacture: U.S.A.
• Weight: 2.6 Oz.

Product description

This Trapper is a part of the Buffalo Horn Family. The water buffalo has been one of mankind’s most useful resources for thousands of years, and the properties of Genuine Buffalo Horn make it a natural handle material of choice for knives. The Trapper gets its name from the consumer it was designed for. Because of its basic trapping and skinning blades and its light weight, it is a must-have knife for those who trap small game. It is a jack knife with two full length blades; a slender Clip and a long Spey. The Clip blade is commonly used as a multi-purpose blade and preferred for detail work while the Spey blade is commonly used as an all-purpose utility blade. This knife is constructed with Case Tru-Sharp™ stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance. Comes conveniently packaged in a box. Made in Bradford, PA, USA from domestic and imported materials.

• Blades: Stainless Steel Clip And Spey
• Length Closed: 4 1/8 Inches
• Great everyday pocket knife for projects around the house, the outdoors, and hunting
• Made In Bradford, PA. USA
• Manufacture's Limited Lifetime Warranty

User questions & answers

Question:	Large case trapper with water buffalo handle in chrome vanadium (cv) steel blades ? i have found no other knives like this any where only ss blades
Answer:	This knife is listed wrong, Amazon would not let me edit the description, knife is stainless with a BH254SS pattern on the tang stamp

Product features

Trapper Knives

The Trapper was originally designed for those who trap small game and has become a favorite pattern for many Case knife collectors. Our Trapper is equip with two full length blades, a slender Clip blade and a long Spey blade. This versatile pocket knife is a great everyday carry and suitable for outdoor use or hunting. This collection features Tru-Sharp Surgical Stainless Steel, Chrome Vanadium, or 154-CM blades with synthetic or bone handles to choose from. Our Trappers have a length of 4.13 inches for a comfortable fit in hand.

From Our Hands To Your Pockets

For some folks, a pocketknife is like a wallet or a set of keys. They don’t leave home without one. Who knows when a rope will need cutting, a fish will need filleting or a pesky clamshell package will need opening? For the past 129 years, we’ve been proud to know our knives have earned their place in the pockets of the farms, fishermen, hunters, ropers and even bankers who carry them. Maybe it’s because they’re crafted in Bradford, PA. Maybe it’s because they’re made with the finest materials.

What Makes a Case Knife Different?

Made in Bradford, PA, USA since 1889 160 steps: Each knife takes over 160 manufacturing processes to complete Hand-Crafted: Every knife is hand crafted by the most skilled artisans in the business Collectible Premium knives.

Quality Craftsmanship is in the Details

Case's commitment to quality is evident in the many pairs of hands that it takes to create just one knife. Case knives start with carefully shaped handles made from a wide range of genuine materials like cattle bone, stag antler, buffalo horn, mother-of-pearl, exotic woods and stones.

Everyday Tasks

The Trapper knife is perfect for everyday tasks such as opening mail, boxes, and other small chores around the house-like cutting tape off a hockey stick.

Outdoor Use

The Trapper is an excellent knife for outdoor use especially when cutting rope or fishing net.

It is a great pocket knife to have handy when you are working on outdoor projects as well.

Hunting

The basic trapping and skinning blades on these trappers make it a must-have knife for those who trap small game.

The muted tip on the spey blade prevents any accidental puncturing while skinning and dressing.

Care Tips for Case Knives

Tru-Sharp Stainless Steel (SS) is a special high-carbon steel that helps the blades hold an edge. It also offers extraordinary blade strength and corrosion resistance.

Chrome Vanadium (CV) blades are known for their edge-holding ability and easy re-sharpening. However, they are less resistant to rusting, pitting and discoloration than stainless steel. We recommend keeping a thin film of oil on the blade to maintain the finish.

Sharpening

Blades are honed at an inclusive angle of 35° - 45° from the factory. Maintaining a constant angle, hold the blade 17° - 22° from the surface of a sharpening stone and stroke the blade as if shaving a thin layer from the stone. Repeat the stroking motion along the entire edge of the blade starting at the blade heel and working to the tip. Turn the blade over and repeat the process.

Cleaning

To clean the blades and handles of your Case knife, apply a small drop of oil in the joints of your knife and a small amount of oil on a clean, soft rag or cloth. Wipe down the blades and handles with the soft cloth. The inside of knife can be cleaned with cotton-tipped swabs and wooden tooth picks. To remove any adhesive tape on your knife, apply nail polish remover or lighter fluid to a soft cloth to easily remove the residue. Rusting may occur to older knives. Rust spots on older knives should be oiled well and the knife should be allowed to sit for a few days. Carefully, scrape away the rust spot with the tip of a sharp, stiff knife.

T

Our Recommendation

Case Honing Oil.

This honing oil is made especially for re-sharpening knives. The main features of this honing oil are: protect the sharpening stone, carry away debris, and produce a keen edge on a metal blade such as a knife.

Product description

Black/white carbon fiber weave Series. 10111 1/2L SS pattern. 4. 38" Closed. Mirror finish stainless locking clip blade. Black and white carbon fiber weave handle. Nickel silver bolsters). swing guard. Inlay shield. Boxed.

• Blades: Stainless Steel Locking Clip W/Swing Guard
• Length Closed: 4 3/8 Inches
• Great everyday pocket knife for projects around the house, the outdoors, and hunting
• Made In Bradford, PA. USA
• Manufacture's Limited Lifetime Warranty

Product description

Beautiful CASE XX Yellow Delrin Mini Copperlock



Handcrafted in the U.S.A.

CASE XX 30116 , CA30116 COPPERLOCK YELLOW SYN C 31749L CV



This handsome new knife has never been used or re-sharpened, and comes with a Limited Lifetime Manufacturer's Warranty. It is 3 5/8 inches long(folded/closed) and weighs approximately 2.0 ounces. The blade material is Chrome Vanadium Steel. The handle is smooth Yellow Delrin with an Oval Nickel Silver CASE Inlay shield. The bolsters are highly polished Nickel Silver. So, if you're looking for a great knife to collect, carry, or give as a gift... don't pass this one up!

• Blades: Chrome Vanadium Steel Locking Clip
• Length Closed: 3 5/8 Inches
• Great everyday pocket knife for projects around the house, the outdoors, and hunting
• Made In Bradford, PA. USA
• Manufacture's Limited Lifetime Warranty

Product description

Beautiful CASE XX Blue Pearl Kirinite Pocket Hunter



Handcrafted in the U.S.A.

CASE XX 23439 , CA23439 POCKET HUNTER SPARXX BL 102165 SS



This handsome new knife has never been used or re-sharpened, and comes with a Limited Lifetime Manufacturer's Warranty. It is 2 3/4 inches long(folded/closed) and weighs approximately 1.7 ounces. The blade material is Tru-Sharp Surgical Stainless Steel. The handle is Blue Pearl Kirinite with an Oval Nickel Silver White Sparxx Inlay shield. The bolsters are highly polished Nickel Silver. So, if you're looking for a great knife to collect, carry, or give as a gift... don't pass this one up!

• Blades: Stainless Steel Clip And Skinner
• Length Closed: 2 3/4 Inches
• Great everyday pocket knife for projects around the house, the outdoors, and hunting
• Made In Bradford, PA. USA
• Manufacture's Limited Lifetime Warranty

Product description

TB3139 CV pattern. 3. 88" closed. Mirror finish stainless clip blade. Yellow smooth synthetic handle. Nickel silver bolster(s). Inlay shield. Boxed.

• Blades: Chrome Vanadium Steel Clip
• Length Closed: 3 7/8 Inches
• Great everyday pocket knife for projects around the house, the outdoors, and hunting
• Made In Bradford, PA. USA
• Manufacture's Limited Lifetime Warranty

User questions & answers

Question:	How long Is the open knife and how long colsed
Answer:	Thank you for your question. Being made out of a natural material, all of the handles on these knives will vary slightly. No two handles will be exactly the same.

• Blades: Stainless Steel Clip And Spey
• Length Closed: 4 1/8 Inches
• Great everyday pocket knife for projects around the house, the outdoors, and hunting
• Made In Bradford, PA. USA
• Manufacture's Limited Lifetime Warranty

Product description

The Case Hammerhead is a must own Case Product. Constructed with a locking blade, this knife blends the stability of a fixed-blade knife and the portability of a pocket folder. Easy to open and close, but solid when locked into place.This pocket knife features an etched and glazed locking Clip blade as well as a smooth jet-black synthetic handle. The Clip blade is commonly used as a multi-purpose blade and is preferred for its wide variety of uses. This blade is constructed with Case Tru-Sharp Stainless Steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance. Comes with a genuine leather sheath. The durable folding knife is great for everyday use for projects around the house, the outdoors, and even engraving. Comes conveniently packaged in a box. Made in Bradford, PA, USA from domestic and imported materials.

• Blades: Stainless Steel Skillfully Etched, Glazed Blade
• Length Closed: 5 Inches
• Great everyday pocket knife for projects around the house, the outdoors, and hunting
• Made In Bradford, PA. USA
• Manufacture's Limited Lifetime Warranty

User questions & answers

Question:	What is the blade length of the case hammerhead knife? is it longer than the mako
Answer:	To quote from Steve Pfeiffer's book "Collecting Case Knives": "The term "bone" as applied to Case pocket knife handle material refers to the shin bone of cattle, sourced from South America and processed by jigging and dying at the Case factory."
Question:	Does this hammerhead knife come with a leather or nylon sheath
Answer:	This knife utilizes a 4" Clip blade. I hope that helps!
Question:	questions. 1) what is the blade length on this knife? 2) where is it made
Answer:	The blade length from pivot pin to tip is 4 1/2" long! Exposed blade length is 4 1/8" long!
Question:	What is the handle material on the case mako and hammerhead? wood, g10? is it black? idk help ! lol
Answer:	According to the Case site, the Genuine Stag Small Stockman (Model 00178) is 2.63". So, not sure why the two answers show 3- 1/4" and 3- 1/2".

Product description

This Case Russlock knife is virtually indestructible. Part of the Rough Black family the rugged, synthetic handle on this knife is inspired by our “Gum Fuddy” knives of World War II. The Russlock knife is a pattern that was named after Case founder, J. Russel “Russ” Case. This pattern features a liner lock mechanism, along with a gimped lever for convenient one-hand opening. The Clip blade on this durable folding knife is commonly used as a multi-purpose utility blade and is preferred for detail work. Constructed with Case Tru-Sharp Stainless Steel, this knife has special high-carbon steel that helps the blades holds an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance. This pocket knife is suitable for everyday demands, hunting, or the outdoors. Comes conveniently packaged in a box. Made in Bradford, PA, USA from domestic and imported materials.

• Blades: Stainless Steel One-Hand Opening Clip
• Length Closed: 4 1/4 Inches
• Great everyday pocket knife for projects around the house, the outdoors, and hunting
• Made In Bradford, PA. USA
• Manufacture's Limited Lifetime Warranty

User questions & answers

Question:	Is this a 2020 Case
Answer:	Thank you for checking on that. This item originally went into production several years ago. However, Case is still making this item. Depending on the seller you purchase this from, and the items they have in stock, it is possible you may receive one made in 2020. However, more likely than not you would receive a 2019 or previous years model.

Product features

Russlock Knives

The Russlock pattern was named after Case founder, J. Russel 'Russ' Case. A gimped lever sticks out slightly off the end of the handle providing convenient one-hand opening. This collection features Tru-Sharp surgical steel and Chrome Vanadium folding blades with bone or synthetic handles. With the combination of modern design and the handcrafted quality of Case, this knife is sure to make a great addition to your collection.

From Our Hands To Your Pockets

For some folks, a pocketknife is like a wallet or a set of keys. They don’t leave home without one. Who knows when a rope will need cutting, a fish will need filleting or a pesky clamshell package will need opening? For the past 129 years, we’ve been proud to know our knives have earned their place in the pockets of the farmers, fishermen, hunters, ropers, and even bankers who carry them. Maybe it’s because they’re crafted in Bradford, PA.

What Makes a Case Knife Different?

Made in Bradford, PA, USA since 1889 160 steps: Each knife takes over 160 manufacturing processes to complete Hand-Crafted: Every knife is hand crafted by the most skilled artisans in the business Collectible Premium knives.

Quality Craftsmanship is in the Details

Case's commitment to quality is evident in the many pairs of hands that it takes to create just one knife. Case knives start with carefully shaped handles made from a wide range of genuine materials like cattle bone, stag antler, buffalo horn, mother-of-pearl, exotic woods and stones.

Blade Types

This collection offers two different blade types:

1) Clip blade - equipped for cutting and slicing in tight spots.

2) Drop point blade - excels at cutting and carving.

These blades are both ideal for every day carry and simple chores.

One-Handed Opening

The gimped lever (pictured above) provides the convenient one-handed opening.

Locking Blade

This pattern features a liner lock mechanism. The liner lock opens via a tensioned metal liner inside the handle. Opening the blade activates the lock and unlocking is achieved by placing the thumb on the front part of the liner and pushing to the left which releases the blade. This allows for easy one-hand opening and closing.

Care Tips for Case Knives

Tru-Sharp Stainless Steel (SS) is a special high-carbon steel that helps the blades hold an edge. It also offers extraordinary blade strength and corrosion resistance.

Chrome Vanadium (CV) blades are known for their edge-holding ability and easy re-sharpening. However, they are less resistant to rusting, pitting and discoloration than stainless steel. We recommend keeping a thin film of oil on the blade to maintain the finish.

Sharpening Your Case Knife

Blades are honed at an inclusive angle of 35° - 45° from the factory. Maintaining a constant angle, hold the blade 17° - 22° from the surface of a sharpening stone and stroke the blade as if shaving a thin layer from the stone. Repeat the stroking motion along the entire edge of the blade starting at the blade heel and working to the tip. Turn the blade over and repeat the process.

Cleaning Your Case Knife

Using a small drop of oil, wipe down the joints, blades, and handles. The inside of knife can be cleaned with cotton-tipped swabs and wooden tooth picks. To remove any adhesive tape on your knife, apply nail polish remover or lighter fluid to a soft cloth to easily remove the residue. Rusting may occur to older knives. Rust spots on older knives should be oiled well and the knife should be allowed to sit for a few days. Carefully, scrape away the rust spot with the tip of a sharp, stiff knife.

Our Recommendation

Case Honing Oil.

This honing oil is made especially for re-sharpening knives. The main features of this honing oil are: protect the sharpening stone, carry away debris, and produce a keen edge on a metal blade such as a knife.